[Why]
DMColor inaccurately updates color space, bias and scale
destructively in dc_plane_state. This can be resolved by
accurately populating the infos on dc_plane_info where then
translation to plane state can happen as a whole surface update sequence.
[How]
Remove dc_plane_state update in DMColor and update color space,
bias and scale on dc_plane_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DC core fixes
- DCN35 fix
- DCN4+ fixes
- DML2 fix
- New SPL features
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
- Improvements to seemless boot.
- Adjustments for DSC dock.
- DML improvements
- DMCUB fixes for D0/D3 and new register offset.
- Code cleanup.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC 3.2.303 contains some improvements as summarized below:
* Improve brightness control
* Add support for UHBR10 eDP
* OPTC required only for DTBCLK_P for dcn401
* Fix TBT monitor resume issue
* Code cleanup
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prioritize Aux-based over PWM-based brightness control
for more types of panels and introduce a new structure
to store and manage the type of brightness control used.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Muyuan Yang <muyuan.yang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
The current UHBR10 eDP panel has new security feature update. Add support for the new FW
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Liu Xi (Alex) <xi.liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where an MPO plane is being dragged around partially off-screen,
it is possible to get a flip where the only scaling parameters to change
are the clip rect size and position. Currently, clip rect size changes
are considered medium updates, which can result in the clip rect being used
for HW programming being larger than the clip rect that was used for the
last DML validation. This can lead to mismatches in different parts of the
pipe and can result in a p-state hang.
[How]
- consider clip rect size changes scaling changes, therefore full updates
- refactor get_scaling_info_update_type for clarity
- remove clip_size_change update flag
Clip rect size changes were previously demoted from full updates as an
optimization when the MPO + ODM policy changed to always pre-allocate MPO
pipes, but it created the issue described above. Personally testing this
use case, the performance feels fine with full update spam, and we expect
this is a fairly infrequent use case. If the performance needs to be
optimized in the future, consider reworking the entire update type logic
to run a DML pass and determine the update type based on what DML says
will actually change.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current pipe unlock order set within dcn401_interdependent_update_lock.
Separate the logic from the functionality to allow for unit testing
and make it easier to debug.
[How]
Add a flag to indicate if a pipe unlock order should be set.
Create function to determine unlock order.
Indicate which pipes should be unlocked first using
array stored in dc scratch memory.
Pipes indicated in array can be unlocked in any order.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
cm2_params is used to set update_flags.
It's value is not intended to be modified.
[WHAT]
Change the declaration of cm2_params to be a constant variable
Reviewed-by: Tao Huang <tao.huang@amd.com>
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Shunlu Zhang <Shunlu.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8d20a066fa.
It's causing a failure in the abm_gradual igt test.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't actually need to request that the compositor does a full
modeset to modify the panel power savings level, we can instead
just make a request to DMUB, to set the new level dynamically.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3578
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Clear cached watermark after resume
- Update IPS default mode for DCN35/DCN351
- Use full update for swizzle mode change
- Skip to enable dsc if it has been off
- Fix underflow when setting underscan on DCN401
- Remove always-false branches
- Check null pointer before dereferencing se
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
1) We did linear/non linear transition properly long ago
2) We used that path to handle SystemDisplayEnable
3) We fixed a SystemDisplayEnable inability to fallback to passive by
impacting the transition flow generically
4) AFMF later relied on the generic transition behavior
Separating the two flows to make (3) non-generic is the best immediate
coarse of action.
DC can discern SSAMPO3 very easily from SDE.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We intend to consolidate dp tunneling and conventional dp link training.
[HOW]
1. Use the same link training entry for both dp and dpia
2. Move SET_CONFIG of non-transparent mode to dmub side
3. Add set_tps_notification dmub_cmd to notify tps request for
non-transparent dpia link training
4. Check dpcd request result and abort link training early if dpia
aux tunneling fails
5. Add option to avoid affect old product
6. Separately handle wait_time_microsec for dpia
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add options to change sharpen policy based on surface format
and scaling ratios.
[HOW]
Add sharpen_policy to change policy based on surface format
and scale_to_sharpness_policy based on scaling ratios.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain profiles have higher HDR multiplier than SDR white level max
which is not currently supported.
[HOW]
Use SDR white level when calculating matrix coefficients for HDR RGB MPO
path instead of HDR multiplier.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add interface for controlling shapness level input into DCN.
- Update SPL to support custom sharpness values.
- Add support for different sharpness values depending on YUV/RGB
content.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To provide option to dpia control power management
[How]
By adding disable_usb4_pm_support bit field in dpia_debug option to
control dpia power management
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Fix MS/MP mismatches in dml21 for dcn401
- Resolved Coverity issues
- Add back quality EASF and ISHARP and dc dependency changes
- Add sharpness support for windowed YUV420 video
- Add improvements for text display and HDR DWM and MPO
- Fix Synaptics Cascaded Panamera DSC Determination
- Allocate DCN35 clock table transfer buffers in GART
- Add Replay Low Refresh Rate parameters in dc type
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Various DML 2.1 fixes
- Fix module unload
- Fix construct_phy with MXM connector
- Support UHBR10 link rate on eDP
- Revert updated DCCG wrappers
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Supporting UHBR10 link rate on eDP leverages
the existing DP2.0 code but need to add some small
adjustments in code.
[how]
Acknowledge the given DPCD caps for UHBR10
link rate support and allow DP2.0 programming
sequence and link training for eDP.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some cursor issue
- Fix print format specifiers in DC_LOG_IPS
- Fix minor coding errors in dml21 phase 5
- Fix MST BW calculation Regression
- Improve FAM control for DCN401
- Add null pointer checks for some code
- Refactor 3DLUT for non-DMA
- Optimize vstartup position for AS-SDP
- Update to using new dccg callbacks
- Enable otg synchronization logic for DCN321
- Disable DCN401 UCLK P-State support on full updates
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Remove force_backlight_start_level since it is never used.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Clean up some files style problems
- Program the DET segment when initializing pipes in dcn10_hwseq
- Fix overlay with pre-blend color processing
- Disable SubVP if Hardware Rotation is Used
- Fix few things in DML
- Re-enable panel replay feature
- Fix null pointer dereference under mst+dsc setup
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
When DRR is active with variable refresh rate, add the ability to block DRR
clamped P-State strategies (such as SubVP).
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a dc debug option to keep crtc on when ips switch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Identify few unused fileds in dc_caps. Remove them.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- SPL improvements.
- Address coverity issues.
- DML2 fixes.
- Code cleanup.
- DIO and DCCG refactor.
- Improve the PSR state.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Need to identify which fast updates will update more than just the
address.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Visual Confirm would tell us if it ever
entered idle state.
[How]
Add debug option for IPS visual confirm
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
New scaler needs the input to be full range color space. This will also fix
issues that come up due to not having a predefined limited color space matrix
for certain color spaces
how:
Use bias and scale HW to expand the range of limited color spaces to full
before the scaler
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Due to a HW bug, HBR audio is not supported for
DP2 encoders for certain ASICs.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain configurations of DCN401 require ODM4:1 to support DCC for 10K
surfaces. DCC should be conservatively disabled in those cases.
The issue is that current logic limits 10K surface DCC for all
configurations of DCN401.
[How]
Add DC ASIC cap to indicate max surface width that can support DCC.
Disable DCC if this ASIC cap is non-zero and surface width exceeds it.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Enable DCC on DCN401
- Add reg definitions for DCN401 DCC
- Remove duplicate null check
- Remove always true condition
- Validate function returns
- Ensure curve to hw translation succeed
- Use periodic detection for ipx/headless
- Fix 1DLUT setting for NL SDR blending
- Adjust reg field for DSC wait for disconnect
- Remove a redundant check in authenticated_dp
- Add HW cursor visual confirm
- Fix cursor issues with ODMs and magnification
- Wait for double buffer update on ODM changes
- Reset DSC memory status
- Program CURSOR_DST_X_OFFSET in viewport space
- Add null checks before accessing struct elements
- Fix reduced resolution and refresh rate
- Make DML2.1 P-State method force per stream
- Add workaround to restrict max frac urgent for DPM0
- Call dpmm when checking mode support
- resync OTG after DIO FIFO resync
- Always enable HPO for DCN4 dGPU
- Use sw cursor for DCN401 with rotation
- Add Replay general cmd
- Check HDCP returned status
- Check and log for function error codes
- Check and log for function error codes
- Remove useless function call
- Fix uninitialized variables in dcn401
- Fix cursor size issues
- Run DC_LOG_DC after checking link->link_enc
- Remove redundant checks for pipe_ctx->stream
- Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
- Fix cursor issues with ODMs and HW rotations
- Remove unnecessary variable
- Remove redundant var from display_rq_dig_calc in dml
- Refactor dccg401_get_other_enable_symclk_fe
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Added HW cursor visual confirm
[HOW]
Added visual confirm logic when programming cursor positions.
HW is programmed on cursor updates since cursor can change without flips.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently the force only works for a single display, make it so it can
be forced per stream.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Tell the system about the current host router bandwidth to be used to
measure and calculate the right voltage to be used.
[how]
Send SMU message of each DPIA host router bandwidth.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e902dd7f3e.
A proper fix for this issue has been implemented in DMUB FW. So, no need
to keep the workaround.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add flag to disable IPS when it is not allowed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: JinZe.Xu <jinze.xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adds support for performing the sequential ONO changes from DCN351
into DCN35 ASIC based on revision.
[How]
Check the revision and run the DCN351 sequences on applicable revisions.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings the following changes:
- Add sequential ONO sequencing for DCN35
- Add new GPINT command definitions
- reduce ODM slice count to initial new dc state only when needed
- Enable copying of bounding box data from VBIOS DMUB
- Guard reading 3DLUT registers for dcn32/dcn35
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some panel, it cannot handle pseudo vblank set by otg resync
when leave psr
[How]
The monitor patch will keep otg_on during enter IPS1.
And then we don't need to do otg resync when wake up.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How&Why]
Once IPS active, all the DCN resources are
not be allowed to access.
It needs to a function for 3rd party to
on/off IPS.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently there's an issue on DCN401 that prevents oled eDP panels from
being lit up that is still under investigation. To unblock dev work
while investigating, we can work around the issue by skipping toggling
the enablement of the backlight.
[How]
- new debug bit that will skip touching backlight enable DPCD for oled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate some memory, send the address in chunks to dmub, and finally
ask it to copy the bounding box data into the newly allocated memory.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes some unused code with the required adjustments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable sharpener support for DCN401
[How]
- Removed memcmp check that was preventing ISHARP from being enabled.
- Add missing ISHARP register defines, masks, and writes.
- Add programming of Blur and Scale coefficients.
- Program FMT_MODE and NLDELTA registers based on LLS_PREF and pixel
- format
- Only enable ISHARP for YUV420
- Add disabling of ISHARP
- Add debug flags and registry keys for debugging ISHARP.
- Set default to medium level
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version pairs with DMUB FW Release 0.0.218.0 for dcn314/315/316, dcn35/351, dcn401
and brings along the following:
- Fix powerpc compilation
- Fix TBT+TypeC Daisy-chain lightup
- Fix ODM combine setup
- Fix OTC underflow on dcn35
- Fix DVI config for dcn401
- Add ips status info to debugfs
- Add 3DLUT DMA load trigger
- Modify clock programming to support DPM
- Disable dcn401 idle optimizations
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable adaptive scaler support for DCN401
[How]
- Enable build flag for SPL
- Set prefer_easf flag to true
- Apply light linear scaling policy based on transfer function and pixel
format. Choose between linear or non-linear scaling
- Set matrix_mode based on pixel format
- Disable ring estimator
- Add missing EASF register defines, masks, and writes
- Disable EASF if scale ratio or number of taps is unsupported and when
bypassing the scaler
- Add debug flags and registry keys for debugging SPL and EASF
- Add support for Visual Confirm with EASF
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c49e44ede5.
This causes regression on DP link layer test.
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Read default boot options
- Find max flickerless instant vtotal delta
- Refactor dcn401_update_clocks
- Reduce I2C speed to 95kHz in DCN401
- Allow higher DSC slice support for small timings on dcn401
- Don't offload flip if not only address update
- Check UHBR13.5 cap when determining max link cap
- Enable SYMCLK gating in DCCG
- Expand to higher link rates
- Add left edge pixel for YCbCr422/420 + ODM pipe split
- Add resource interfaces for get ODM slice rect
- Add COEF filter types for DCN401
- Refactor DCN401 DCCG into component directory
- Fix 3dlut size for Fastloading on DCN401
- Fix write to non-existent reg on DCN401
- Remove USBC check for DCN32
- Remove unused code for some dc files
- Disable AC/DC codepath when unnecessary
- Create dcn401_clk_mgr struct
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Refactor complex code into manageable functions. This also cleans up
some updating logics.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enable root clock optimization for SYMCLK and only
disable it when it's actively used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If there are no DC clock limits present, or if the DC limits are the same
as the AC limits, we can disable the AC/DC codepath as there won't be any
validation differences between the two modes.
[HOW]
When all DC power mode clock limits are the same as the max clock
values, there won't be any difference between AC mode and DC mode. Zero
out DC limits that equal max and provide a new cap to indicate the
presence of any non-zero DC mode limit. In summary:
- zero out DC limits that are the same as max clock value
- new dc cap to indicate the presence of DC mode limits
- set limits present if any clock has distinct AC and DC values from SMU
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some problems reported by Coverity
- Fix idle optimization checks for multi-display and dual eDP
- Fix incorrect size calculation for loop
- Fix DSC-re-computing
- Add Replay capability and state in debugfs
- Refactor DCCG into component folder
- Refactor input mode programming for DIG FIFO
- Reset DSC clock in post unlock update
- Clean-up recout calculation for visual confirm
- Enable urgent latency adjustments for DCN35
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Providing a mechanism to manipulate the pwm frequency on the
individual GPUs and monitor the transition during the switch.
[How]
Added a variable in dc_debug_options data structure. Using
this variable to call the newly added command on the firmware.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sreeja Golui <sreeja.golui@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Disable seamless boot on 128b/132b encoding
- Have cursor and surface updates together
- Change ASSR disable sequence to avoid corruption
- Fix few IPS problems
- Enable Replay for DCN315
- Fix few ODM problems
- Fix FEC_READY write timing
- Fix few FPO problems
- Adjust DML21 gpuvm_enable assignment
- Fix divide by 0 error in VM environment
- Fix few DCN35 problems
- Fix flickering on DCN321
- Fix mst resume problem
- Fix multi-disp FAMS problem
- Refactor Replay
- Update some of the dcn303 parameters
- Enable legacy fast update for dcn301
- Add VCO parameter for DCN31 FPU
- Fix problems reported by Coverity
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for PHYSYMCLK and only
disable it when it's actively being used
v2: Fix array-index-out-of-bounds in dcn35_calc_blocks_to_gate
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
In multi-monitor cases the VBLANK stretch that is required to align both
monitors may be so large that it may create issues for gaming performance.
Use debug value to restrict in-game FAMS support for multi-disp use case.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Block FPO if the max stretch refresh rate is low enough
to cause a flicker by storing the maximum safe refresh
decrease from nominal in stream.
- Brought over various Freesync Luminance functions to dc. Use these
new functions to block fpo if we will flicker.
- Generalized increase/reduce dependent functions to reduce code clutter
and allow for easier use.
- Added a debug option to enable the feature. Disabled by default.
Co-authored-by: Ethan Bitnun <etbitnun@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove a duplicate definition of an SPL related enum transform.h
Since its used in SPL, it has been moved to its own header.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
* Expand dmub_cmd operations.
* Update DVI configuration.
* Modify power sequence.
* Enable Z10 flag for IPS.
* Multiple code cleanups.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit groups many parts of the code that are redundant or not used
and drops all of them.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates some comments to be more precise and adds another
small comment to some other parts to improve the code readability.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding support for chroma subsampling offset (cositing) in scaler
calculations to adjust reference point where we determine post-scaling
chroma value in YUV420 surfaces.
[How]
Add support for cositing options: NONE, LEFT and TOPLEFT Add debug
option force_cositing and set default to TOPLEFT to maintain same
behaviour as without offset support.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Changes to support future versions of FAMS.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want flexibility to choose how pwrseq instance is mapped to eDP panel
[How]
Add configuration option to choose the pwrseq mapping policy.
When enabled, allow fixed mapping between DIG inst to pwrseq inst.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version pairs with DMUB FW Release 0.0.211.0 for dcn314, dcn35, dcn351
and brings along the following:
- Fix underflow in subvp/non-subvp configs
- Fix compiler warnings
- Add handling for DC power mode
- Add extra logging for DMUB, HUBP and OTG
- Add timing pixel encoding for mst mode validation
- Expand supported Replay residency mode
- Allow HPO PG and RCG for DCN35
- Update pipe topology log to support subvp
- Disable Z8 minimum stutter period check for DCN35
- Enable RCO for HDMISTREAMCLK in DCN35
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Future implementations will require a distinction between AC power and
DC power (wall power and battery power, respectively). To accomplish this,
adding a power mode parameter to certain dc interfaces, and adding a
separate DML2 instance for DC mode validation. Default behaviour unchanged.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function to count the number of valid connectors does not
guarantee that the first n indices are valid, only that there
exist n valid indices. When invalid indices are present, this
results in later valid connectors being missed, as processing
would end after checking n indices.
[How]
- count valid indices separately from total indices examined
- add explicit definition of MAX_LINKS
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Park
Aric Cyr
Nicholas Kazlauskas
Dillon Varone
Sung Lee
Kaitlyn Tse
Dr. David Alan Gilbert
Ovidiu Bunea
Samson Tam
Muyuan Yang
Liu Xi (Alex)
Joshua Aberback
Austin Zheng
Shunlu Zhang
Leo Li
Hamza Mahfooz
Charlene Liu
Peichen Huang
Relja Vojvodic
Meenakshikumar Somasundaram
Martin Leung
Sung Joon Kim
Rodrigo Siqueira
Fudong Wang
Ilya Bakoulin
Duncan Ma
Alvin Lee
George Shen
Aurabindo Pillai
Ryan Seto
JinZe.Xu
Lewis Huang
Chiawen Huang
Alex Deucher
Alex Hung
Daniel Miess
Sreeja Golui
Iswara Nagulendran
Ethan Bitnun