Switch drm_dp_cec.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-4-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Switch drm_dp_helper.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-3-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
drm_dp_dpcd_read_link_status() follows the "return error code or number
of bytes read" protocol, with the code returning less bytes than
requested in case of some errors. However most of the drivers
interpreted that as "return error code in case of any error". Switch
drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it
follow that protocol too.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Existing DPCD access functions return an error code or the number of
bytes being read / write in case of partial access. However a lot of
drivers either (incorrectly) ignore partial access or mishandle error
codes. In other cases this results in a boilerplate code which compares
returned value with the size.
Implement new set of DPCD access helpers, which ignore partial access,
always return 0 or an error code.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-1-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Unpriv spec states:
| The Zvknhb and Zvbc Vector Crypto Extensions --and accordingly the
| composite extensions Zvkn, Zvknc, Zvkng, and Zvksc-- require a Zve64x
| base, or application ("V") base Vector Extension. All of the other
| Vector Crypto Extensions can be built on any embedded (Zve*) or
| application ("V") base Vector Extension.
Enforce the minimum requirement via schema.
Link: https://github.com/riscv/riscv-isa-manual/blob/main/src/vector-crypto.adoc#extensions-overview
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-flask-relay-b36ee622b2c8@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Section 33.18.2. Zve*: Vector Extensions for Embedded Processors
in [1] says:
| The Zve32f and Zve64x extensions depend on the Zve32x extension. The Zve64f extension depends
| on the Zve32f and Zve64x extensions. The Zve64d extension depends on the Zve64f extension
| The Zve32x extension depends on the Zicsr extension. The Zve32f and Zve64f extensions depend
| upon the F extension
| The Zve64d extension depends upon the D extension
Apply these rules to the bindings to help prevent invalid combinations.
Link: https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-698e64a-2024-09-09 [1]
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-banking-crestless-58f3259a5018@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Per the specifications, the d extension for double-precision floating
point operations depends on the f extension for single-precision floating
point. Add that requirement to the bindings. This differs from the
Linux implementation, where single-precious only is not supported.
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-perpetual-daunting-ad489c9a857a@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the floating point extensions.
The check for "d" might be slightly confusingly shorter than that of "f",
despite "d" depending on "f". This is because the requirement that a
hart supporting double precision must also support single precision,
should be validated by dt-bindings etc, not the kernel but lack of
support for single precision only is a limitation of the kernel.
Tested-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250312-reptile-platinum-62ee0f444a32@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Add PMU support for per-function engine activity stats.
per-function engine activity is enabled when VF's are enabled.
If 2 VF's are enabled, then the applicable function values are
0 - PF engine activity
1 - VF1 engine activity
2 - VF2 engine activity
This can be read from perf tool as shown below
./perf stat -e xe_<bdf>/engine-active-ticks,gt=0,engine_class=0,
engine_instance=0,function=1/ -I 1000
v2: fix documentation (Umesh)
remove global for functions (Lucas, Michal)
v3: fix commit message
move function_id checks to same place (Michal)
v4: fix comment (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add support for function level engine activity stats.
Engine activity stats are enabled when VF's are enabled
v2: remove unnecessary initialization
move offset to improve code readability (Umesh)
remove global for function engine activity (Lucas)
v3: fix commit message (Michal)
v4: remove enable function parameter
fix kernel-doc (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the vector crpyto extensions.
Currently riscv_isa_extension_available(<vector crypto>) will return
true on systems that support the extensions but vector itself has been
disabled by the kernel, adding validation callbacks will prevent such a
scenario from occuring and make the behaviour of the extension detection
functions more consistent with user expectations - it's not expected to
have to check for vector AND the specific crypto extension.
The Unpriv spec states:
| The Zvknhb and Zvbc Vector Crypto Extensions --and accordingly the
| composite extensions Zvkn, Zvknc, Zvkng, and Zvksc-- require a Zve64x
| base, or application ("V") base Vector Extension. All of the other
| Vector Crypto Extensions can be built on any embedded (Zve*) or
| application ("V") base Vector Extension.
While this could be used as the basis for checking that the correct base
for individual crypto extensions, but that's not really the kernel's job
in my opinion and it is sufficient to leave that sort of precision to
the dt-bindings. The kernel only needs to make sure that vector, in some
form, is available.
Link: https://github.com/riscv/riscv-isa-manual/blob/main/src/vector-crypto.adoc#extensions-overview
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-entertain-shaking-b664142c2f99@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the vector extensions. From the
kernel's perfective, it's not required to differentiate between the
conditions for all the various vector subsets - it's the firmware's job
to not report impossible combinations. Instead, the kernel only has to
check that the correct config options are enabled and to enforce its
requirement of the d extension being present for FPU support.
Since vector will now be disabled proactively, there's no need to clear
the bit in elf_hwcap in riscv_fill_hwcap() any longer.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250312-eclair-affluent-55b098c3602b@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Commit c54b386969 ("VFS: Change vfs_mkdir() to return the dentry.")
changed cachefiles_get_directory, replacing "subdir" with a ERR_PTR
from the result of cachefiles_inject_write_error, which is either 0
or some error code. This causes an oops when the resulting pointer
is passed to vfs_mkdir.
Use a similar pattern to what is used earlier in the function; replace
subdir with either the return value from vfs_mkdir, or the ERR_PTR
of the cachefiles_inject_write_error() return value, but only if it
is non zero.
Fixes: c54b386969 ("VFS: Change vfs_mkdir() to return the dentry.")
cc: netfs@lists.linux.dev
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20250325125905.395372-1-marc.dionne@auristor.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
I had to spend some (a lot;) time to understand why pidfd_info_test
(and more) fails with my patch under qemu on my machine ;) Until I
applied the patch below.
I think it is a bad idea to do the things like
#ifndef __NR_clone3
#define __NR_clone3 -1
#endif
because this can hide a problem. My working laptop runs Fedora-23 which
doesn't have __NR_clone3/etc in /usr/include/. So "make" happily succeeds,
but everything fails and it is not clear why.
Link: https://lore.kernel.org/r/20250323174518.GB834@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a single-threaded process exits do_notify_pidfd() will be called twice,
from exit_notify() and right after that from do_notify_parent().
1. Change exit_notify() to call do_notify_pidfd() if the exiting task is
not ptraced and it is not a group leader.
2. Change do_notify_parent() to call do_notify_pidfd() unconditionally.
If tsk is not ptraced, do_notify_parent() will only be called when it
is a group-leader and thread_group_empty() is true.
This means that if tsk is ptraced, do_notify_pidfd() will be called from
do_notify_parent() even if tsk is a delay_group_leader(). But this case is
less common, and apart from the unnecessary __wake_up() is harmless.
Granted, this unnecessary __wake_up() can be avoided, but I don't want to
do it in this patch because it's just a consequence of another historical
oddity: we notify the tracer even if !thread_group_empty(), but do_wait()
from debugger can't work until all other threads exit. With or without this
patch we should either eliminate do_notify_parent() in this case, or change
do_wait(WEXITED) to untrace the ptraced delay_group_leader() at least when
ptrace_reparented().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250323171955.GA834@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
* ras/edac-cxl:
EDAC/device: Fix dev_set_name() format string
EDAC: Update memory repair control interface for memory sparing feature
EDAC: Add a memory repair control feature
EDAC: Add a Error Check Scrub control feature
EDAC: Add scrub control feature
EDAC: Add support for EDAC device features control
* ras/edac-drivers:
EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
EDAC/ie31200: Break up ie31200_probe1()
EDAC/ie31200: Fold the two channel loops into one loop
EDAC/ie31200: Make struct dimm_data contain decoded information
EDAC/ie31200: Make the memory controller resources configurable
EDAC/ie31200: Simplify the pci_device_id table
EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
EDAC/ie31200: Fix the error path order of ie31200_init()
EDAC/ie31200: Fix the DIMM size mask for several SoCs
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
EDAC/{skx_common,i10nm}: Fix some missing error reports on Emerald Rapids
EDAC/igen6: Fix the flood of invalid error reports
EDAC/ie31200: work around false positive build warning
* ras/edac-misc:
MAINTAINERS: Add a secondary maintainer for bluefield_edac
EDAC/pnd2: Make read-only const array intlv static
EDAC/igen6: Constify struct res_config
EDAC/amd64: Simplify return statement in dct_ecc_enabled()
EDAC: Use string choice helper functions
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
This new test makes sure that ftrace can trace a
function that was introduced by a livepatch.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-2-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The HDMI vs. not scanline offset stuff no longer applies to the
latest platforms, so using HAS_DDI() is a bit confusing. Replace
with a more specific set of conditions.
Also let's just deal with the platform types in the if ladder
itself, and handle the HDMI vs. not within the specific branch
for those platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Add new ftrace helpers functions cleanup_tracing, trace_function and
check_traced_functions.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-1-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Executing dql_reset after setting a non-zero value for limit_min can
lead to an unreasonable situation where dql->limit is less than
dql->limit_min.
For instance, after setting
/sys/class/net/eth*/queues/tx-0/byte_queue_limits/limit_min,
an ifconfig down/up operation might cause the ethernet driver to call
netdev_tx_reset_queue, which in turn invokes dql_reset.
In this case, dql->limit is reset to 0 while dql->limit_min remains
non-zero value, which is unexpected. The limit should always be
greater than or equal to limit_min.
Signed-off-by: Jing Su <jingsusu@didiglobal.com>
Link: https://patch.msgid.link/Z9qHD1s/NEuQBdgH@pilot-ThinkCentre-M930t-N000
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This extends the VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT ioctls to attach/detach
a given pasid of a vfio device to/from an IOAS/HWPT.
Link: https://patch.msgid.link/r/20250321180143.8468-4-yi.l.liu@intel.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This adds pasid_at|de]tach_ioas ops for attaching hwpt to pasid of a
device and the helpers for it. For now, only vfio-pci supports pasid
attach/detach.
Link: https://patch.msgid.link/r/20250321180143.8468-3-yi.l.liu@intel.com
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no helpers for user to check if a given ID is allocated or not,
neither a helper to loop all the allocated IDs in an IDA and do something
for cleanup. With the two needs, a helper to get the lowest allocated ID
of a range and two variants based on it.
Caller can check if a given ID is allocated or not by:
bool ida_exists(struct ida *ida, unsigned int id)
Caller can iterate all allocated IDs by:
int id;
while ((id = ida_find_first(&pasid_ida)) >= 0) {
//anything to do with the allocated ID
ida_free(pasid_ida, pasid);
}
Link: https://patch.msgid.link/r/20250321180143.8468-2-yi.l.liu@intel.com
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This adds 4 test ops for pasid attach/replace/detach testing. There are
ops to attach/detach pasid, and also op to check the attached hwpt of a
pasid.
Link: https://patch.msgid.link/r/20250321171940.7213-18-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is need to get the selftest device (sobj->type == TYPE_IDEV) in
multiple places, so have a helper to for it.
Link: https://patch.msgid.link/r/20250321171940.7213-17-yi.l.liu@intel.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The callback is needed to make pasid_attach/detach path complete for mock
device. A nop is enough for set_dev_pasid.
A MOCK_FLAGS_DEVICE_PASID is added to indicate a pasid-capable mock device
for the pasid test cases. Other test cases will still create a non-pasid
mock device. While the mock iommu always pretends to be pasid-capable.
Link: https://patch.msgid.link/r/20250321171940.7213-16-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The underlying infrastructure has supported the PASID attach and related
enforcement per the requirement of the IOMMU_HWPT_ALLOC_PASID flag. This
extends iommufd to support PASID compatible domain requested by userspace.
Link: https://patch.msgid.link/r/20250321171940.7213-15-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Intel iommu driver just treats it as a nop since Intel VT-d does not have
special requirement on domains attached to either the PASID or RID of a
PASID-capable device.
Link: https://patch.msgid.link/r/20250321171940.7213-14-yi.l.liu@intel.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Per the definition of IOMMU_HWPT_ALLOC_PASID, iommufd needs to enforce
the RID to use PASID-compatible domain if PASID has been attached, and
vice versa. The PASID path has already enforced it. This adds the
enforcement in the RID path.
This enforcement requires a lock across the RID and PASID attach path,
the idev->igroup->lock is used as both the RID and the PASID path holds
it.
Link: https://patch.msgid.link/r/20250321171940.7213-13-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This extends the below APIs to support PASID. Device drivers to manage pasid
attach/replace/detach.
int iommufd_device_attach(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
int iommufd_device_replace(struct iommufd_device *idev,
ioasid_t pasid, u32 *pt_id);
void iommufd_device_detach(struct iommufd_device *idev,
ioasid_t pasid);
The pasid operations share underlying attach/replace/detach infrastructure
with the device operations, but still have some different implications:
- no reserved region per pasid otherwise SVA architecture is already
broken (CPU address space doesn't count device reserved regions);
- accordingly no sw_msi trick;
Cache coherency enforcement is still applied to pasid operations since
it is about memory accesses post page table walking (no matter the walk
is per RID or per PASID).
Link: https://patch.msgid.link/r/20250321171940.7213-12-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
AMD IOMMU requires attaching PASID-compatible domains to PASID-capable
devices. This includes the domains attached to RID and PASIDs. Related
discussions in link [1] and [2]. ARM also has such a requirement, Intel
does not need it, but can live up with it. Hence, iommufd is going to
enforce this requirement as it is not harmful to vendors that do not
need it.
Mark the PASID-compatible domains and enforce it in the PASID path.
[1] https://lore.kernel.org/linux-iommu/20240709182303.GK14050@ziepe.ca/
[2] https://lore.kernel.org/linux-iommu/20240822124433.GD3468552@ziepe.ca/
Link: https://patch.msgid.link/r/20250321171940.7213-11-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
PASIDs of PASID-capable device can be attached to hwpt separately, hence
a pasid array to track per-PASID attachment is necessary. The index
IOMMU_NO_PASID is used by the RID path. Hence drop the igroup->attach.
Link: https://patch.msgid.link/r/20250321171940.7213-10-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
igroup->attach->device_list is used to track attached device of a group
in the RID path. Such tracking is also needed in the PASID path in order
to share path with the RID path.
While there is only one list_head in the iommufd_device. It cannot work
if the device has been attached in both RID path and PASID path. To solve
it, replacing the device_list with an xarray. The attached iommufd_device
is stored in the entry indexed by the idev->obj.id.
Link: https://patch.msgid.link/r/20250321171940.7213-9-yi.l.liu@intel.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The igroup->hwpt and igroup->device_list are used to track the hwpt attach
of a group in the RID path. While the coming PASID path also needs such
tracking. To be prepared, wrap igroup->hwpt and igroup->device_list into
attach struct which is allocated per attaching the first device of the
group and freed per detaching the last device of the group.
Link: https://patch.msgid.link/r/20250321171940.7213-8-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing code detects the first attach by checking the
igroup->device_list. However, the igroup->hwpt can also be used to detect
the first attach. In future modifications, it is better to check the
igroup->hwpt instead of the device_list. To improve readbility and also
prepare for further modifications on this part, this adds a helper for it.
Link: https://patch.msgid.link/r/20250321171940.7213-7-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With more use of the fields of igroup, use a local vairable instead of
using the idev->igroup heavily.
No functional change expected.
Link: https://patch.msgid.link/r/20250321171940.7213-6-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As the pasid is passed through the attach/replace/detach helpers, it is
necessary to ensure only the non-pasid path adds reserved_iova.
Link: https://patch.msgid.link/r/20250321171940.7213-5-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Most of the core logic before conducting the actual device attach/
replace operation can be shared with pasid attach/replace. So pass
@pasid through the device attach/replace helpers to prepare adding
pasid attach/replace.
So far the @pasid should only be IOMMU_NO_PASID. No functional change.
Link: https://patch.msgid.link/r/20250321171940.7213-4-yi.l.liu@intel.com
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide a high-level API to allow replacements of one domain with another
for specific pasid of a device. This is similar to
iommu_replace_group_handle() and it is expected to be used only by IOMMUFD.
Link: https://patch.msgid.link/r/20250321171940.7213-3-yi.l.liu@intel.com
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add kdoc to highligt the caller of iommu_[attach|replace]_group_handle()
and iommu_attach_device_pasid() should always provide a new handle. This
can avoid race with lockless reference to the handle. e.g. the
find_fault_handler() and iommu_report_device_fault() in the PRI path.
Link: https://patch.msgid.link/r/20250321171940.7213-2-yi.l.liu@intel.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are only two sw_msi implementations in the entire system, thus it's
not very necessary to have an sw_msi pointer.
Instead, check domain->cookie_type to call the two sw_msi implementations
directly from the core code.
Link: https://patch.msgid.link/r/7ded87c871afcbaac665b71354de0a335087bf0f.1742871535.git.nicolinc@nvidia.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To provide the iommufd_sw_msi() to the iommu core that is under a different
Kconfig, move it and its related functions to driver.c. Then, stub it into
the iommu-priv header. The iommufd_sw_msi_install() continues to be used by
iommufd internal, so put it in the private header.
Note that iommufd_sw_msi() will be called in the iommu core, replacing the
sw_msi function pointer. Given that IOMMU_API is "bool" in Kconfig, change
IOMMUFD_DRIVER_CORE to "bool" as well.
Since this affects the module size, here is before-n-after size comparison:
[Before]
text data bss dec hex filename
18797 848 56 19701 4cf5 drivers/iommu/iommufd/device.o
722 44 0 766 2fe drivers/iommu/iommufd/driver.o
[After]
text data bss dec hex filename
17735 808 56 18599 48a7 drivers/iommu/iommufd/device.o
3020 180 0 3200 c80 drivers/iommu/iommufd/driver.o
Link: https://patch.msgid.link/r/374c159592dba7852bee20968f3f66fa0ee8ca93.1742871535.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When DMA/MSI cookies were made first-class citizens back in commit
46983fcd67 ("iommu: Pull IOVA cookie management into the core"), there
was no real need to further expose the two different cookie types.
However, now that IOMMUFD wants to add a third type of MSI-mapping
cookie, we do have a nicely compelling reason to properly dismabiguate
things at the domain level beyond just vaguely guessing from the domain
type.
Meanwhile, we also effectively have another "cookie" in the form of the
anonymous union for other user data, which isn't much better in terms of
being vague and unenforced. The fact is that all these cookie types are
mutually exclusive, in the sense that combining them makes zero sense
and/or would be catastrophic (iommu_set_fault_handler() on an SVA
domain, anyone?) - the only combination which *might* be reasonable is
perhaps a fault handler and an MSI cookie, but nobody's doing that at
the moment, so let's rule it out as well for the sake of being clear and
robust. To that end, we pull DMA and MSI cookies apart a little more,
mostly to clear up the ambiguity at domain teardown, then for clarity
(and to save a little space), move them into the union, whose ownership
we can then properly describe and enforce entirely unambiguously.
[nicolinc: rebase on latest tree; use prefix IOMMU_COOKIE_; merge unions
in iommu_domain; add IOMMU_COOKIE_IOMMUFD for iommufd_hwpt]
Link: https://patch.msgid.link/r/1ace9076c95204bbe193ee77499d395f15f44b23.1742871535.git.nicolinc@nvidia.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The Allwinner A523 SoC comes with a watchdog very similar to the ones in
the previous Allwinner SoCs, but oddly enough moves the first half of its
registers up by one word. Since we have different offsets for these
registers across the other SoCs as well, this can simply be modelled by
just stating the new offsets in our per-SoC struct.
The rest of the IP is the same as in the D1, although the A523 moves its
watchdog to a separate MMIO frame, so it's not embedded in the timer
anymore. The driver can be ignorant of this, because the DT will take
care of this.
Add a new struct for the A523, specifying the SoC-specific details, and
tie the new DT compatible string to it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20250307005712.16828-5-andre.przywara@arm.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The Allwinner A523 SoC features a watchdog similar to the one used in
previous SoCs, but moves some registers around (by just one word), making
it incompatible to existing IPs.
Add the new name to the list of compatible string, and also to the list
of IP requiring two clock inputs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-4-andre.przywara@arm.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Dmitry Baryshkov
Conor Dooley
Riana Tauro
Marc Dionne
Oleg Nesterov
Borislav Petkov (AMD)
Filipe Xavier
Ville Syrjälä
Jing Su
Yi Liu
Nicolin Chen
Robin Murphy
Andre Przywara