If we're moving an extent that was partially overwritten,
bch2_write_rechecksum() will trim it to the currenty live range.
If we then also want to compress it, it'll be decrypted - but the nonce
has been advanced for the overwritten start of the extent that we
dropped, and we were using the nonce we calculated before rechecksum().
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Fixes: 127d90d282 ("bcachefs: bch2_write_prep_encoded_data() now returns errcode")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmff3F0ACgkQ1w0aZmrP
KyGZDQ/7BzMeVJNjr8gRAfYtjqt+NWGr1vf6Tz8GDsGEHfgqeFrX/GyRMZi90kOV
YMB8K+HiIou5yJtY2ZWgSkGsId8aK7fHMmN5KnP4l0XL6bcwi7yP/sck2m+KdN9k
cApi/iVMVtJ4/+4MPrD6rgPcsDonj+wHwMQ3WItGNgenYDTOnEmqeEL7AK6HGTAg
kTUmjVnyws+9UllNRzgJ/67OVewzPWy8imixFl1H+ZEfM0rTuNtr0zzl6rttXIU2
w6FK6Kw3WBZYYfLelLLmtZ2UoxqVD90Y6DOPip1mMjj95jrJPSedsZfUsZivDTNn
JOIn/zLtwGjJ2hO/2rFxEEoeiqG79Fskg7fGzQ5mxVtJ1/otDc53WMHjNtQQpYNz
3xpPrwVOdCNQvorDLoDL2cInoc91ZADyJGFmLAou5NQdMbAWKsGKXEQolEiG0JEh
hmWlrzkY5cns/dSGeZDAZvyhpVSF8dnClUP2BsPU3vVYN2MbCEBH10dwOkWcUhiq
kj+1sNPnxkDiy054e708N3w0OKToHwtgJkfpEENxtI7dtCj/6sz9JHaN77RPiuzf
aCIyjrhlUslkB6q5bLznyGoiQTaqzjOVWIGPcMKNT7XbElmhxIUMh3U05SktdlXz
F9m1jIvThxPKj492i8ZEDjZQ9iBCEYm5KmnRD89aW+zf4UPbSYg=
=b5n2
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Use kvmalloc in xt_hashlimit, from Denis Kirjanov.
2) Tighten nf_conntrack sysctl accepted values for nf_conntrack_max
and nf_ct_expect_max, from Nicolas Bouchinet.
3) Avoid lookup in nft_fib if socket is available, from Florian Westphal.
4) Initialize struct lsm_context in nfnetlink_queue to avoid
hypothetical ENOMEM errors, Chenyuan Yang.
5) Use strscpy() instead of _pad when initializing xtables table name,
kzalloc is already used to initialized the table memory area.
From Thorsten Blum.
6) Missing socket lookup by conntrack information for IPv6 traffic
in nft_socket, there is a similar chunk in IPv4, this was never
added when IPv6 NAT was introduced. From Maxim Mikityanskiy.
7) Fix clang issues with nf_tables CONFIG_MITIGATION_RETPOLINE,
from WangYuli.
* tag 'nf-next-25-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: Only use nf_skip_indirect_calls() when MITIGATION_RETPOLINE
netfilter: socket: Lookup orig tuple for IPv6 SNAT
netfilter: xtables: Use strscpy() instead of strscpy_pad()
netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error
netfilter: fib: avoid lookup if socket is available
netfilter: conntrack: Bound nf_conntrack sysctl writes
netfilter: xt_hashlimit: replace vmalloc calls with kvmalloc
====================
Link: https://patch.msgid.link/20250323100922.59983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes the following build warning:
```
drivers/net/ethernet/amd/au1000_eth.c:574:6: warning: no previous prototype for 'au1000_ReleaseDB' [-Wmissing-prototypes]
574 | void au1000_ReleaseDB(struct au1000_private *aup, struct db_dest *pDB)
| ^~~~~~~~~~~~~~~~
```
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250323190450.111241-1-johan.korsnes@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS is using two kinds of hash tables.
First one is controlled by /proc/sys/net/core/rps_sock_flow_entries = 2^N
and using the N low order bits of the l4 hash is good enough.
Then each RX queue has its own hash table, controlled by
/sys/class/net/eth1/queues/rx-$q/rps_flow_cnt = 2^X
Current hash function, using the X low order bits is suboptimal,
because RSS is usually using Func(hash) = (hash % power_of_two);
For example, with 32 RX queues, 6 low order bits have no entropy
for a given queue.
Switch this hash function to hash_32(hash, log) to increase
chances to use all possible slots and reduce collisions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250321171309.634100-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When delete l3s ipvlan:
ip link del link eth0 ipvlan1 type ipvlan mode l3s
This may cause a null pointer dereference:
Call trace:
ip_rcv_finish+0x48/0xd0
ip_rcv+0x5c/0x100
__netif_receive_skb_one_core+0x64/0xb0
__netif_receive_skb+0x20/0x80
process_backlog+0xb4/0x204
napi_poll+0xe8/0x294
net_rx_action+0xd8/0x22c
__do_softirq+0x12c/0x354
This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after
ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process
like this:
(CPU1) | (CPU2)
l3mdev_l3_rcv() |
check dev->priv_flags: |
master = skb->dev; |
|
| ipvlan_l3s_unregister()
| set dev->priv_flags
| dev->l3mdev_ops = NULL;
|
visit master->l3mdev_ops |
To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.
Suggested-by: David Ahern <dsahern@kernel.org>
Fixes: c675e06a98 ("ipvlan: decouple l3s mode dependencies from other modes")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250321090353.1170545-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250320212951.11142-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
-----BEGIN PGP SIGNATURE-----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=HSDM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to
the integrated PHY on RK3228/RK3328. Current powerup/down operation is
not compatible with the integrated PHY found in these newer SoCs.
Add operations to powerup/down the integrated PHY found in RK3528.
Use helpers that can be used by other GMAC variants in the future.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250319214415.3086027-6-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to
the integrated PHY on RK3228/RK3328. Current powerup/down operation is
not compatible with the integrated PHY found in these newer SoCs.
Add a new integrated_phy_powerdown operation and change the call chain
for integrated_phy_powerup to prepare support for the integrated PHY
found in these newer SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250319214415.3086027-5-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to
the integrated PHY on RK3228/RK3328. Current powerup/down operation is
not compatible with the integrated PHY found in these SoCs.
Move the rk_gmac_integrated_phy_powerup/down functions to top of the
file to prepare for them to be called directly by a GMAC variant
specific powerup/down operation.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250319214415.3086027-4-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add initial support for the RK3528 GMAC variant.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patch.msgid.link/20250319214415.3086027-3-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add compatible string for the RK3528 variant.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250319214415.3086027-2-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following operations can trigger a warning[1]:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode balance-rr
ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp
ip netns exec ns1 ip link set bond0 type bond mode broadcast
ip netns del ns1
When delete the namespace, dev_xdp_uninstall() is called to remove xdp
program on bond dev, and bond_xdp_set() will check the bond mode. If bond
mode is changed after attaching xdp program, the warning may occur.
Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode
with xdp program attached is not good. Add check for xdp program when set
bond mode.
[1]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930
Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ...
RSP: 0018:ffffc90000063d80 EFLAGS: 00000282
RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff
RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48
RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb
R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8
R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000
FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x83/0x130
? unregister_netdevice_many_notify+0x8d9/0x930
? report_bug+0x18e/0x1a0
? handle_bug+0x54/0x90
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? unregister_netdevice_many_notify+0x8d9/0x930
? bond_net_exit_batch_rtnl+0x5c/0x90
cleanup_net+0x237/0x3d0
process_one_work+0x163/0x390
worker_thread+0x293/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xec/0x1e0
? __pfx_kthread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: improve stmmac resume rx clocking
stmmac has had a long history of problems with resuming, illustrated by
reset failure due to the receive clock not running.
Several attempts have been attempted over the years to address this
issue, such as moving phylink_start() (now phylink_resume()) super
early in stmmac_resume() in commit 90702dcd19 ("net: stmmac: fix MAC
not working when system resume back with WoL a ctive.") However, this
has the downside that stmmac_mac_link_up() can (and demonstrably is)
called before or during the driver initialisation in another thread.
This can cause issues as packets could begin to be queued, and the
transmit/receive enable bits will be set before any initialisation has
been done.
Another attempt is used by dwmac-socfpga.c in commit 2d871aa071 ("net:
stmmac: add platform init/exit for Altera's ARM socfpga") which
pre-dates the above commit.
Neither of these two approaches consider the effect of EEE with a PHY
that supports receive clock-stop and has that feature enabled (which
the stmmac driver does enable). If the link is up, then there is the
possibility for the receive path to be in low-power mode, and the PHY
may stop its receive clock.
This series addresses these issues by (each is not necessarily a
separate patch):
1) introducing phylink_prepare_resume(), which can be used by MAC
drivers to ensure that the PHY is resumed prior to doing any
re-initialisation work. This call is added to stmmac_resume().
2) moving phylink_resume() after all re-initialisation has completed,
thereby ensuring that the hardware is ready to be enabled for
packet reception/transmission.
3) with (1) and (2) addressed, the need for socfpga to have a private
work-around is no longer necessary, so it is removed.
4) introducing phylink functions to block/unblock the receive clock-
stop at the PHY. As these require PHY access over the MDIO bus,
they can sleep, so are not suitable for atomic access.
5) the stmmac hardware requires the receive clock to be running for
reset to complete. Depending on synthesis options, this requirement
may also extend to writing various registers as well, e.g. setting
the MAC address, writing some of the vlan registers, etc. Full
details are in the databook.
We add blocking/unblocking of the PHY receive clock-stop around
parts of the main stmmac driver where we have a context that we
can sleep. These are wrapped with the new phylink functions.
However, depending on synthesis options, there could be other
places where the net core calls the driver with a BH-disabled
context where we can't sleep, and thus can't block the PHY from
disabling its receive clock. These are documented with FIXME
comments.
Given the last paragraph above, I am wondering whether a better
approach would be to ensure that receive clock-stop is always disabled
at the PHY with stmmac. From what I can see, implementations do not
document to this level of detail, which makes it difficult to tell
which registers require the receive clock to be running to behave
correctly.
This patch series has been tested on the Tegra194 Jetson Xavier NX
board kindly donated by NVidia, with two additional patches that are
pending in patchwork - the first is required to have EEE's LPI mode
passed through to the MAC on this platform to allow testing under
PHY clock-stop scenarios. The second is a bug fix for PHYLIB and
makes "eee off" functional, but should not affect this series.
All patches on top of net-next commit f749448ce9 ("Merge branch
'net-mlx5-hw-steering-cleanups'")
https://patchwork.kernel.org/project/netdevbpf/patch/E1ttnHW-00785s-Uq@rmk-PC.armlinux.org.uk/https://patchwork.kernel.org/project/netdevbpf/patch/E1ttmWN-0077Mb-Q6@rmk-PC.armlinux.org.uk/
====================
Link: https://patch.msgid.link/Z9ySeo61VYTClIJJ@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DesignWare core requires the receive clock to be running during
certain operations. Ensure that we block PHY RXC clock-stop during
these operations.
This is a best-efforts change - not everywhere can be covered by this
because of net's core locking, which means we can't access the MDIO
bus to configure the PHY to disable RXC clock-stop in certain areas.
These are marked with FIXME comments.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6p-008Vjz-Qy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some MACs require the PHY receive clock to be running to complete setup
actions. This may fail if the PHY has negotiated EEE, the MAC supports
receive clock stop, and the link has entered LPI state. Provide a pair
of APIs that MAC drivers can use to temporarily block the PHY disabling
the receive clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6k-008Vjt-MZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the previous commit addressed DWGMAC resuming with a PHY in
suspended state, there is now no need for socfpga to work around
this. Remove this code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6f-008Vjn-J1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Synopsys Designware GMAC core databook requires all clocks to be
active in order to complete software reset, which we perform during
resume.
However, IEEE 802.3 allows a PHY to stop its clocks when placed in
low-power mode, which happens when the system is suspended and WoL
is not enabled.
As an attempt to work around this, commit 36d18b5664 ("net: stmmac:
start phylink instance before stmmac_hw_setup()") started phylink
early, but this has the side effect that the mac_link_up() method may
be called before or during the initialisation of GMAC hardware.
We also have the socfpga glue driver directly calling phy_resume()
also as an attempt to work around this.
In a previous commit, phylink_prepare_resume() has been introduced
to give MAC drivers a way to ensure that the PHY is resumed prior to
their initialisation of their MAC hardware. This commit adds the call,
and moves the phylink_resume() call back to where it should be before
the aforementioned commit.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6a-008Vjh-FG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the system is suspended, the PHY may be placed in low-power mode
by setting the BMCR 0.11 Power down bit. IEEE 802.3 states that the
behaviour of the PHY in this state is implementation specific, and
the PHY is not required to meet the RX_CLK and TX_CLK requirements.
Essentially, this means that a PHY may stop the clocks that it is
generating while in power down state.
However, MACs exist which require the clocks from the PHY to be running
in order to properly resume. phylink_prepare_resume() provides them
with a way to clear the Power down bit early.
Note, however, that IEEE 802.3 gives PHYs up to 500ms grace before the
transmit and receive clocks meet the requirements after clearing the
power down bit.
Add a resume preparation function, which will ensure that the receive
clock from the PHY is appropriately configured while resuming.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6V-008Vjb-AP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every loadable module should have a description, to avoid a warning such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/exportfs/exportfs.o
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250324173242.1501003-1-arnd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Consider a process with a group leader L and a sub-thread T.
L does sys_exit(1), then T does sys_exit_group(2).
In this case wait_task_zombie(L) will notice SIGNAL_GROUP_EXIT and use
L->signal->group_exit_code, this is correct.
But, before that, do_notify_parent(L) called by release_task(T) will use
L->exit_code != L->signal->group_exit_code, and this is not consistent.
We don't really care, I think that nobody relies on the info which comes
with SIGCHLD, if nothing else SIGCHLD < SIGRTMIN can be queued only once.
But pidfs_exit() is more problematic, I think pidfs_exit_info->exit_code
should report ->group_exit_code in this case, just like wait_task_zombie().
TODO: with this change we can hopefully cleanup (or may be even kill) the
similar SIGNAL_GROUP_EXIT checks, at least in wait_task_zombie().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250324171941.GA13114@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Unlike X2 and EF100, we do not attempt to parse the firmware file to
find an image within it; we simply hand the entire file to the MC,
which is responsible for understanding any container formats we might
use and validating that the firmware file is applicable to this NIC.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/9a72a74002a7819c780b0a18ce9294c9d4e1db12.1742493017.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike Siena, no EF10 board ever had an external PHY, and consequently
MDIO handling isn't even built into the firmware. Since Siena has
been split out into its own driver, the MDIO code can be deleted from
the sfc driver.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/aa689d192ddaef7abe82709316c2be648a7bd66e.1742493017.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My role has changed since I originally agreed to help with netfs, and
I'm no longer providing a lot of value here. Luckily, Paulo has agreed
to step in as co-maintainer.
Acked-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20250324-master-v1-1-e2dd2fdb15b4@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().
Fixes: 54f00cce11 ("vmxnet3: Add XDP support.")
Signed-off-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/20250320045522.57892-1-sankararaman.jayaraman@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 14a1968074 ("net: reorganize IP MIB values") changed
MIB values to group hot fields together.
Since then 5 new fields have been added without caring about
data locality.
This patch moves IPSTATS_MIB_OUTPKTS, IPSTATS_MIB_NOECTPKTS,
IPSTATS_MIB_ECT1PKTS, IPSTATS_MIB_ECT0PKTS, IPSTATS_MIB_CEPKTS
to the hot portion of per-cpu data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250320101434.3174412-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses generic skb_set_owner_r() and sock_rfree()
for received packets, with socket lock being owned.
Switch to private versions, avoiding two atomic operations
per packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250320121604.3342831-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
nexthop: Convert RTM_{NEW,DEL}NEXTHOP to per-netns RTNL.
Patch 1 - 5 move some validation for RTM_NEWNEXTHOP so that it can be
called without RTNL.
Patch 6 & 7 converts RTM_NEWNEXTHOP and RTM_DELNEXTHOP to per-netns RTNL.
Note that RTM_GETNEXTHOP and RTM_GETNEXTHOPBUCKET are not touched in
this series.
rtm_get_nexthop() can be easily converted to RCU, but rtm_dump_nexthop()
needs more work due to the left-to-right rbtree walk, which looks prone
to node deletion and tree rotation without a retry mechanism.
v1: https://lore.kernel.org/netdev/20250318233240.53946-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20250319230743.65267-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rtm_del_nexthop(), only nexthop_find_by_id() and remove_nexthop()
require RTNL as they touch net->nexthop.rb_root.
Let's move RTNL down as rtnl_net_lock() before nexthop_find_by_id().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we pass false to the rtnl_held param of lwtunnel_valid_encap_type(),
we can move RTNL down before rtm_to_nh_config_rtnl().
Let's use rtnl_net_lock() in rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of NHA_GROUP entries is guaranteed to be non-zero in
nh_check_attr_group().
Let's remove the redundant check in nexthop_create_group().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nexthop_add() checks if NLM_F_REPLACE is specified without
non-zero NHA_ID, which does not require RTNL.
Let's move the check to rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NHA_OIF needs to look up a device by __dev_get_by_index(),
which requires RTNL.
Let's move NHA_OIF validation to rtm_to_nh_config_rtnl().
Note that the proceeding checks made the original !cfg->nh_fdb
check redundant.
NHA_FDB is set -> NHA_OIF cannot be set
NHA_FDB is set but false -> NHA_OIF must be set
NHA_FDB is not set -> NHA_OIF must be set
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will push RTNL down to rtm_new_nexthop(), and then we
want to move non-RTNL operations out of the scope.
nh_check_attr_group() validates NHA_GROUP attributes, and
nexthop_find_by_id() and some validation requires RTNL.
Let's factorise such parts as nh_check_attr_group_rtnl()
and call it from rtm_to_nh_config_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will split rtm_to_nh_config() into non-RTNL and RTNL parts,
and then the latter also needs tb.
As a prep, let's move nlmsg_parse() to rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250319230743.65267-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_rcv_core() is using:
__IP6_ADD_STATS(net, idev,
IPSTATS_MIB_NOECTPKTS +
(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
This is currently evaluating both expressions twice.
Fix _DEVADD() and _DEVUPD() macros to evaluate their arguments once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250319212516.2385451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc enhancements 2025-03-19
This series introduces multiple small misc enhancements
from the team to the mlx5 core and Eth drivers.
====================
Link: https://patch.msgid.link/1742392983-153050-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For CT action with commit argument, it's usually followed by the
forward action, either to the output netdev or next chain. The default
behavior for software is to drop by setting action attribute to
TC_ACT_SHOT instead of TC_ACT_PIPE if it's the last action. But driver
can't handle it, so block the offload for such case.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nic mode CT setup where we do hairpin between the two
nics, both nics register to the same flow table (per zone),
and try to offload all rules on it.
Instead, filter the rules that originated from the relevant nic
(so only one side is offloaded for each nic).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align mlx5 driver usage of 'pfnum' with the documentation clarification
introduced in commit bb70b0d48d ("devlink: Improve the port attributes
description").
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mlx5_is_reset_now_capable() checks whether the pci bridge is
accessible only on bridge hot plug capability check. If the pci bridge
is not accessible, reset now will fail regardless of bridge hotplug
capability. Move this check to function mlx5_is_reset_now_capable()
which, in such case, aborts the reset and does so in the request phase
instead of the reset now phase.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As queue affinity is being deprecated and will no longer be supported
in the future, Always check for the presence of the port selection
namespace. When available, leverage it to distribute traffic
across the physical ports via steering, ensuring compatibility with
future NICs.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For simplicity reasons, the driver avoids crossing work queue fragment
boundaries within the same TX WQE (Work-Queue Element). Until today, as
the number of packets in a TX MPWQE (Multi-Packet WQE) descriptor is not
known in advance, the driver pre-prepared contiguous memory for the
largest possible WQE. For this, when getting too close to the fragment
edge, having no room for the largest WQE possible, the driver was
filling the fragment remainder with NOP descriptors, aligning the next
descriptor to the beginning of the next fragment.
Generating and handling these NOPs wastes resources, like: CPU cycles,
work-queue entries fetched to the device, and PCI bandwidth.
In this patch, we replace this NOPs filling mechanism in the TX MPWQE
flow. Instead, we utilize the remaining entries of the fragment with a
TX MPWQE. If this room turns out to be too small, we simply open an
additional descriptor starting at the beginning of the next fragment.
Performance benchmark:
uperf test, single server against 3 clients.
TCP multi-stream, bidir, traffic profile "2x350B read, 1400B write".
Bottleneck is in inbound PCI bandwidth (device POV).
+---------------+------------+------------+--------+
| | Before | After | |
+---------------+------------+------------+--------+
| BW | 117.4 Gbps | 121.1 Gbps | +3.1% |
+---------------+------------+------------+--------+
| tx_packets | 15 M/sec | 15.5 M/sec | +3.3% |
+---------------+------------+------------+--------+
| tx_nops | 3 M/sec | 0 | -100% |
+---------------+------------+------------+--------+
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1742391746-118647-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch drm_dp_tunnel.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-6-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Switch drm_dp_mst_topology.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-5-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Kent Overstreet
Jakub Kicinski
Johan Korsnes
Eric Dumazet
Wang Liang
Nick Child
Jonas Karlman
David Wu
Russell King (Oracle)
Arnd Bergmann
Oleg Nesterov
Edward Cree
Ville Syrjälä
Jeff Layton
Sankararaman Jayaraman
Kuniyuki Iwashima
Jianbo Liu
Paul Blakey
Shay Drory
Amir Tzin
Mark Bloch
Tariq Toukan
Richard Fitzgerald
Dmitry Baryshkov