Make a generic alpm enable function for sink which can be used for
PSR2/PR/Lobf.
v1: Initial version.
v2: Move code comment to intel_psr_needs_alpm(). [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-12-animesh.manna@intel.com
Add an interface in debugfs which will help in debugging LOBF
feature.
v1: Initial version.
v2:
- Remove FORCE_EN flag. [Jouni]
- Change prefix from I915 to INTEL. [Jani]
- Use u8 instead of bool for lobf-debug flag. [Jani]
v3:
- Use intel_connector instead of display. [Jani]
- Remove edp connector check as it was already present
in caller function. [Jani]
- Remove loop of searching edp encoder which is directly
accessible from intel_connector. [Jani]
v4:
- Simplify alpm debug to bool instead of bit-mask. [Jani]
v5:
- Remove READ_ONCE(). [Jani]
- Modify variable name to *_disable_*. [Jouni]
v6: Improved debug print. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-8-animesh.manna@intel.com
For every commit the dependent condition for LOBF is checked
and accordingly update has_lobf flag which will be used
to update the ALPM_CTL register during commit.
v1: Initial version.
v2: Avoid reading h/w register without has_lobf check. [Jani]
v3: Update LOBF in post plane update instead of separate function. [Jouni]
v4:
- Add lobf disable print. [Jouni]
- Simplify condition check for enabling/disabling lobf. [Jouni]
v5: Disable LOBF in pre_plane_update(). [Jouni]
v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
LOBF can be enabled with vrr fixed rate mode, so add check
if vmin = vmax = flipline in compute_config().
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-6-animesh.manna@intel.com
Currently clearing of alpm registers is done through psr_disable()
which is always not correct, without psr also alpm can exist. So
dis-integrate alpm_disable() from psr_disable().
v1: Initial version.
v2:
- Remove h/w register read from alpm_disable(). [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-5-animesh.manna@intel.com
Lobf is enabled part of ALPM configuration and if has_lobf
is set to true respective bit for LOBF will be set. Add debug
print while setting the bitfield of LOBF.
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-4-animesh.manna@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
Currently code is making assumption that PSR is enabled when
intel_alpm_configure is called. This doesn't work if alpm is configured
before PSR is enabled.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-2-animesh.manna@intel.com
Define the DP register contents using the REG_BIT, REG_GENMASK,
etc. macros. Ditch the unhelpful comments. Rename eDP related register
content macros to have EDP_ prefix.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250423100213.720585-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have extended using vblank DC workaround mechanism for
Wa_16025596647. Rename related functions and variables:
vblank_wa_num_pipes -> vblank_enable_count
vblank_dc_work -> vblank_notify_work
intel_display_vblank_dc_work -> intel_display_vblank_notify_work
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-14-jouni.hogander@intel.com
Scope of intel_psr_needs_block_dc_vblank has changed now. Rename it as
intel_psr_needs_vblank_notification. Also rename
intel_crtc::block_dc_for_vblank as intel_crtc:vblank_psr_notify
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-13-jouni.hogander@intel.com
This patch is applying workaround for underrun on idle PSR HW issue
(Wa_16025596647) when PSR is getting enabled. It uses vblank enable/disable
status, DC5/6 enabled disabled and enabled pipes count information made
available.
This patch is also adding calls to dc5/dc6, vblank enable/disable and pipe
enable/disable notification functions as needed.
intel_psr_needs_block_dc_vblank is modified to get vblank enable/disable
notification on PSR capable system.
v2: use intel_dmc interface instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-12-jouni.hogander@intel.com
Add interface to control if package C exit starts at the start of the
undelayed vblank. This is needed to implement workaround for underrun on
idle PSR HW issue (Wa_16025596647).
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-11-jouni.hogander@intel.com
To implement Wa_16025596647 we need to get notification of vblank interrupt
enable/disable. Add new interface to PSR code for this notification.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-10-jouni.hogander@intel.com
We need to apply/remove workaround for underrun on idle PSR HW issue
(Wa_16025596647) when DC5/6 is enabled/disabled. This patch implements
mechanism to notify PSR about DC5/6 enable/disable and applies/removes the
workaround using this notification.
Bspec: 74115
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-9-jouni.hogander@intel.com
We need to apply/remove workaround for underrun on idle PSR HW issue
(Wa_16025596647) when new pipe is enabled or pipe is getting disabled. This
patch implements mechanism to notify PSR about pipe enable/disable and
applies/removes the workaround using this notification.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-8-jouni.hogander@intel.com
Block PKG C-State when enabling PSR when enabling PSR as described in
workaround for underrun on idle PSR HW issue (Wa_16025596647).
v2: use intel_dmc_block_pkgc instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-7-jouni.hogander@intel.com
Add interface to block PKG C-state. This is needed to implement workaround
for underrun on idle PSR HW issue (Wa_16025596647).
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-6-jouni.hogander@intel.com
We need PIPEDMC_BLOCK_PKGC_SW definitions to implement workaround for
underrun on idle PSR HW issue (Wa_16025596647). Add PIPEDMC_BLOCK_PKGC_SW
register definitions.
Bspec: 71265
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-5-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need PIPEDMC_EVT_CTL_4 register. Add PIPEDMC_EVT_CTL_4 register
definitions.
Bspec: 67576
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-4-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need to know enabled. Figure out which non-PSR pipes we will have active
and store it into intel_crtc_state->active_non_psr_pipes. This is currently
assuming only one eDP on a time. I.e. possible secondary eDP with PSR
capable panel is not considered.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-3-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need to have current configured DC state available. Add new interface
for this purpose.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-2-jouni.hogander@intel.com
With the PCH macros switched to use struct intel_display, we have a
number of files that no longer need struct drm_i915_private or anything
else from i915_drv.h anymore. Remove the #include, and add the missing
includes that were previously implicit.
v2: Drop even more of the includes
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Observe that ibx_irq_reset() is really ibx_display_irq_reset(). Make it
so. Move to display, and call it directly from gen8_display_irq_reset()
instead of gen8_irq_reset().
Remove a nearby ancient stale comment while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250409184702.3790548-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Adding link rate and lane count information to i915_display_info makes it
easier and faster to access this data compared to checking kernel logs.
This is particularly beneficial for individuals who are not familiar with
i915 in the following scenarios:
* Debugging DP tunnel bandwidth usage in the Thunderbolt driver.
* During USB4 certification, it is necessary to know the link rate used by
the monitor to prove that the DP tunnel can handle required rates.
* In PHY CTS, when the connector probes are not mounted correctly,
some display lanes may not appear in the DP Oscilloscope, leading to CTS
failures.
This change provides validation teams with an easy way to identify and
troubleshoot issues.
v2: separate seq_printf line (Jani)
v3: separate output line (Jani)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250409230214.963999-1-khaled.almahallawy@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
(cherry picked from commit da9b1c61e7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmf5ExAACgkQ+mJfZA7r
E8rS+Qf/WVswQAzNmDQxSBYvZJl7PFzk0zgrTTixwz8ePDezcnEE/+7VsMuQ3ZY+
k/7uve2WApoRAh8Z4+rpxHu/x3F4fI8oWXXt9Ug7f0OwVlKz4cgE5ax04m+90wqu
j7N5NZcGwMUEPR192GZqALxzSaWsRhPH0p8A32f9PU/Tq1+UTSEwwaMKDIRdmtiR
VHU8rS694tuXXuGoHiHOPMYDacxyQE7XRyTqaBaBvMQrjgbc+ZqcdG+b+Mnp3t6N
GIs4CkT6UkDEpnovA66FSiBWLBkrnNFfnyO5WEUbR13CB459XpwB0as8o2HW85oT
Q6Nui8w3ZeaGUi6U764fNm/FxFh4vw==
=3VwH
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-04-11' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- Update GVT MAINTAINERS (Jani)
Driver Changes:
- Updates for xe3lpd display (Gustavo)
- Fix link training interrupted by HPD pulse (Imre)
- Watermark bound checks for DSC (Ankit)
- VRR Refactor and other fixes and improvements (Ankit)
- More conversions towards intel_display struct (Gustavo, Jani)
- Other clean-up patches towards a display separation (Jani)
- Maintain asciibetical order for HAS_* macros (Ankit)
- Fixes around probe/initialization (Janusz)
- Fix build and doc build issue (Yue, Rodrigo)
- DSI related fixes (Suraj, William, Jani)
- Improve DC6 entry counter (Mohammed)
- Fix xe2hpd memory type identification (Vivek)
- PSR related fixes and improvements (Animesh, Jouni)
- DP MST related fixes and improvements (Imre)
- Fix scanline_offset for LNL+/BMG+ (Ville)
- Some gvt related fixes and changes (Ville, Jani)
- Some PLL code adjustment (Ville)
- Display wa addition (Vinod)
- DRAM type logging (Lucas)
- Pimp the initial FB readout (Ville)
- Some sagv/bw cleanup (Ville)
- Remove i915_display_capabilities debugfs entry (Jani)
- Move PCH type to display caps debugfs entry (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/Z_kTqPX5Mjruq1pL@intel.com
Move more display specific parts of GPU error logging behind the display
snapshot interface.
With the display register capture reduced to just one register, DERRMR,
there's quite a bit of boilerplate here. However, it's still a nice
abstraction and removes a DISPLAY_VER() usage from core i915. With this
approach, it's also easy to add to xe as needed.
v2: Remove stale comment
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/13206969df04426d290d2863dc574e22ca45193a.1744630147.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Have chv_data_lane_soft_reset() get/put dpio internally, and use a
locked version of it within intel_dpio_phy.c. This drops the dependency
on vlv sideband from g4x_dp.c and g4x_hdmi.c, and makes that a DPIO PHY
implementation detail.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250411102715.613082-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to Bspec VRR_CTL_IGN_MAX_SHIFT doesn't exist for MTL and
onwards. On LunarLake and onwards Bit 30 is "Mask Block PkgC" instead. Stop
writing the bit for MeteorLake and onwards
v2: "Ignore Max Shift" bit doesn't exist on MeteorLake either
Bspec: 50508, 68925
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250409054909.968531-1-jouni.hogander@intel.com
We no longer need i915_drv.h in intel_pch.c, and we no longer need
intel_pch.h universally.
With intel_pch.h being included from intel_display_core.h, it's still
included pretty much everywhere, but there's no need to include it
explicitly from i915_drv.h or xe_device_types.h.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/68ec70f6880b7af19bc93b9817959299634a555d.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that intel_pch lives under display, let's begin its
conversion towards struct intel_display.
Move the pch_type to inside intel_display and convert the
callers.
While doing it, sort intel_display_core.h include list
alphabetically.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/8ffe86eb2a02153e3f866a81fb6dc8a3327a0f25.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The only usage of the "PCH" infra is to detect which South Display
Engine we should be using. Move it under display so we can convert
all its callers towards intel_display struct later.
No functional or code change.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/041e3dee494aa15c22172360f2bdd9b15e4acb00.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to our internal spec we need to now check if both
panel luminance and smooth brightness are available in panel for
us to be able to change brightness using luminance value.
--v2
-Add Fixes tag [Ankit]
Fixes: 6448149792 ("drm/i915/backlight: Check Luminance based brightness control for VESA")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250411060235.2732060-3-suraj.kandpal@intel.com
Turns out we've added two similar debugfs files. Consolidate on
intel_display_caps as it has more info and a driver independent name.
IGT has already switched over to intel_display_caps in IGT commit
cf837fc17d6c ("lib/dsc: use intel_display_caps instead of
i915_display_capabilities").
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/241c5886cf2e95c694a693bb1b1953f6ae15390e.1744295009.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We are applying the combo PLL frac w/a to all TGL+ platforms, except
RKL. I *think* all RKL machines use a 24 MHz refclk (certainly all
machines in our CI do) and so technically never need the adjustment.
But let's assume the hardware is exactly the same anyway and simplify
the code by applying the w/a to all TGL+ platforms.
v2: Keep the 38.4 MHz check
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250402171720.9350-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
DG1 apparently needs the combo PLL fractional divider w/a
with 38.4 MHz refclk as well. This isn't listed in bspec, but
looking at the hsd it looks like it was possibly just missed
due to no one having a DG1 around at the time.
This gives us slightly more accurate clocks on DG1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250401163752.6412-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Going forward, struct intel_display is the main display device data
pointer. Convert the i9xx_wm.h interface to struct intel_display.
With this, we can make intel_wm.c independent of i915_drv.h.
v2: Also remove i915_drv.h, fix commit message
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/3e30634d85c0e0aac9c95f9a2f928131ba400271.1744119460.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unify the naming of the data and clock lane timing parameters, and
simplify their bounds checks. Drop the debug messages on out of bounds
parameters as excessive.
Clarify the comment while at it.
Cc: William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/d1a75ae7b9d93a0b50976b5de45ba2ca798991ad.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The history of why the max of VBT clock and data lane prepare timing
parameter is used for both instead of each individually is
unknown. Separate them to follow what the Windows driver does.
Cc; William Tseng <william.tseng@intel.com>
Reviewed-by: William Tseng <william.tseng@intel.com>
Tested-by: William Tseng <william.tseng@intel.com>
Link: https://lore.kernel.org/r/079a26d0aae79f299aee0397dad2d6519cd55071.1743682608.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_dp::mst.active_links actually indicates the number of MST streams,
not the number of MST links (one MST link carrying one or more MST
streams), rename the field accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-7-imre.deak@intel.com
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
There doesn't seem to be a reason to assert for a non-negative stream
counter in intel_dp_check_mst_status() in particular, remove it. There
is now an equivalent assert in intel_dp_mst_dec_active_streams().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-4-imre.deak@intel.com
Add helpers to increment/decrement the active MST stream count, instead
of open-coding these.
In mst_stream_pre_enable(), the increment will happen earlier, this is
ok, since nothing depends on the counter between the two points.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-3-imre.deak@intel.com
The intel_dp::link_trained flag indicates whether the link is active,
regardless of whether the link training passed or failed. For clarity
rename the flag to 'active'. While at it move the flag under
intel_dp::link.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
(cherry picked from commit 327e30123c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 38188a7f57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turns out LNL+ and BMG+ no longer have the weird extra scanline
offset for HDMI outputs. Fix intel_crtc_scanline_offset()
accordingly so that scanline evasion/etc. works correctly on
HDMI outputs on these new platforms.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit fede97b72b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If there are no changes to intel_crtc_can_enable_sagv() there
is no need to do all the sagv bw_state recomputation.
The only slight caveat here is hw state takeover where we
initially disable SAGV, and want it to get re-enabled once
we've determined that it's safe to do so. That can now be
achieved by having intel_crtc_can_enable_sagv() reject SAGV
as long as the crtc_state->inherited flag is set. Once the
flag gets cleared (during initial commit for inactive pipes,
during the first userspace commit for active pipes), we
will naturally recompute all the sagv related state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Now that all the sagv computation has been moved from the
skl+ watermark code into intel_bw_atomic_check() there is
no point in calling intel_bw_modeset_checks() before the
wm computation. Hide it within intel_bw_atomic_check().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The only thing between the current intel_bw_check_sagv_mask() call
site and intel_bw_atomic_check() is skl_wm_add_affected_planes()
which no longer depends on the sagv mask, so we can make life
a lot less confusing by calling intel_bw_check_sagv_mask() from
intel_bw_atomic_check() instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the bw_state->pipe_sagv_reject computation into intel_bw.c
where it belongs.
Previously we had a complicated dance between watermarks and
sagv which required this to be computed earlier, but that was
changed in commit 5e8146251f7b ("extract intel_bw_check_sagv_mask()")
which allows the whole thing to be cleaned up quite a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to use the crtc_state->inherited flag to clean up some
of the early SAGV handling. To make that work nicely I need to
flag even the inactive crtcs as "inherited".
Since we can't expect user space to perform any real commits
on inactive crtcs we'll clear the flag already during
initial_commit().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently intel_bw_calc_min_cdclk() always adds the bw_state
to the atomic state. Not only does it result in potentially
redundant work later, it's also currently causing unwanted cdclk
changes during driver load.
Check if the dbuf bw is actually changing before we decide to
pull in the bw state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_bw_crtc_min_cdclk() only depends on the pipe data rate,
which we already have stashed in bw_state->data_rate[]. So
stashing the resulting min_cdclk[] as well is redundant. Get
rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326162544.3642-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We are seeing timeouts in opening CRC fd when testing on setup where DP
Panel Replay can be enabled. Fix these by checking if CRC is enabled for DP
Panel Replay as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250331090747.2964028-1-jouni.hogander@intel.com
Ville Syrjälä
Animesh Manna
Jouni Högander
Jani Nikula
Thomas Zimmermann
Khaled Almahallawy
Ankit Nautiyal
Dave Airlie
Rodrigo Vivi
Suraj Kandpal
Imre Deak
Vivek Kasireddy