Due to a problem in the iTBT DP-in adapter's firmware the sink on a TBT
link may get disconnected inadvertently if the SINK_COUNT_ESI and the
DP_LINK_SERVICE_IRQ_VECTOR_ESI0 registers are read in a single AUX
transaction. Work around the issue by reading these registers in
separate transactions.
The issue affects MTL+ platforms and will be fixed in the DP-in adapter
firmware, however releasing that firmware fix may take some time and is
not guaranteed to be available for all systems. Based on this apply the
workaround on affected platforms.
See HSD #13013007775.
v2: Cc'ing Mika Westerberg.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13760
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14147
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250519133417.1469181-1-imre.deak@intel.com
(cherry picked from commit c3a48363cf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
(cherry picked from commit d0bf684bd4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- Stop writing ALPM registers when PSR is enabled
- Use the correct connector while computing the link BPP limit on MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aCWlWk5rTE7TH1pN@jlahtine-mobl
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
(cherry picked from commit a8eb102ce0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We want to enable sink ALPM from PSR code. Make intel_alpm_enable_sink
available for PSR.
v2: do not add kerneldoc comments
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-2-jouni.hogander@intel.com
(cherry picked from commit 2d27848876)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.
Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
(cherry picked from commit 266e2fcfe2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmgcsdUACgkQ+mJfZA7r
E8rYqAf/citknZ0aTAOw7+O8581v6/27BsmRYO8T2JvhHWr3RIOeowgyEQ9M3m6y
jBM5qIsGH0JOrDMVDjvuVlfm+JAPRxVABo3GXTpUIu94xszwco+5iQNnHBui0NrP
AnAauh/MZC6YKmTzNVBHW35N+JQJ9clmK6Rf5Bzb8pVP1bPRwRFSpgefHBeimRRY
qeQlqEVfvst5gkQiTe2b/5ydErPB7WfBY4WHGrgykBPt0+3t7Zln3Dqbdm9vB7+p
zEHXQNvX75KGFimUgCf7mU2Hoov0LI1/cazeG1dbv6gczXOUySwIKRIuqKNJ6XsG
PSV0X8Hc1ppL4Sp1Oe/WAdwE2k/xxw==
=rvsI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
Async flip is not supported with Indexed 8 bit format as it depends on
LUT and can't be updated atomically.
Note: This may change the alignment for C8 framebuffers on some
platforms.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-5-b93ef83076c5@intel.com
Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.
v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
move changes in can_async_flip to new patch (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com
The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.
Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.
v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make the gt rps code and display irq code interact via
intel_display_rps.[ch], instead of direct access. Add no-op static
inline stubs for xe instead of having a separate build unit doing
nothing. All of this clarifies the interfaces between i915 core and
display.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/ef2a46dc8f30b72282494f54e98cb5fed7523b58.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All users of vlv_display_irq_postinstall() outside of
intel_display_irq.c have a lock/unlock pair. Move the locking inside the
function. Add an unlocked variant for internal use, similar to the
_vlv_display_irq_reset() and vlv_display_irq_reset() functions.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/93ea785d2d9bdb4e18328aa42a00a492d9d783c0.1746536745.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As per the WA, fbc stride need to be programmed always for bmg.
Display driver handles the need to program the fbc stride using
the override stride. So ensure that we always get the override
stride in case of bmg
v2: re-phrase the commit message.
Bspec: 74212
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://lore.kernel.org/r/20250428115554.116780-1-vinod.govindapillai@intel.com
The driver specific HDCP GSC code will eventually be part of the driver
cores rather than display. Remove the struct intel_display references
from them, and pass struct drm_device instead.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/bf9aa8e44e18eef41e3077a2966935b4e2649b62.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The opaque HDCP GSC context nicely abstracts the differences between
drivers. Pass that instead of struct drm_i915_private or struct
xe_device to intel_hdcp_gsc_msg_send(). We can store the driver specific
data in the context.
This lets us drop the dependency on i915_drv.h from
intel_hdcp_gsc_message.c.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/df1653212f9014e717701b017e78e0017884b870.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate and initialize the HDCP GSC message in
intel_hdcp_gsc_hdcp2_init() as before, but store the pointer to
display->hdcp.hdcp_message in the caller. Similarly, pass in the pointer
to intel_hdcp_gsc_free_message().
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/a74fcc941126bf92d12115b5faf4f75099e26242.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.
There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.
We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Drop the FDO_BUG_URL from the source, and stop suggesting to file bugs
on DPCD backlight issues. We don't do this anywhere else in display,
this isn't a special snowflake.
As a consequence, also drop the dependency on i915_utils.h from
intel_dp_aux_backlight.c.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429112534.2121656-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Minimum HBlank is programmed to address jitter for high resolutions with
high refresh rates that have small Hblank, specifically where Hblank is
smaller than one MTP.
TODO: Add the min_hblank calculation for hdmi as well.
v2: move from intel_audio.c to intel_dp.c
some correction in link_bpp_x16 (Imre)
v3: min_hblank for 8b/10b MST and 128b/132b SST/MST
handle error for intel_dp_mst_dsc_get_slice_count
reset min_hblank before disabling transcoder (Imre)
v4: compute link_bpp_x16 within compute_min_hblank,
return error in case of compute failure
call compute_min_hblank() before vrr_compute_config (Imre)
v5: readout MIN_HBLAN reg for Xe3+
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-2-8b002f1506cc@intel.com
Following the convention, convert intel_hdmi.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_new_intel_connector_in_state(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-3-imre.deak@intel.com
Following the convention, convert intel_dp.c to use an intel_connector
pointer everywhere, calling this pointer connector. If the intel
connector must be casted from a drm_connector, call this pointer
_connector and use this pointer only for the casting.
v2: Use for_each_intel_connector_iter(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250428134716.3396802-2-imre.deak@intel.com
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
Currently, only EDP supports alpm. So, check for alpm support and prevent
the DP connector from accessing the alpm register if doing so is unsupported.
Fixes: acff6d6bde ("drm/i915/lobf: Add mutex for alpm update")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250425132107.2926759-1-animesh.manna@intel.com
Currently we disable the VGA plane from various places, sometimes
multiple times in the same init/resume sequence. Get rid of all this
mess and do it just once. The most correct place seems to be just
after intel_early_display_was() as that one applies various workarounds
that need to be in place before we touch any planes (including the
VGA plane).
Actually, we do still have a second caller in
vlv_display_power_well_init(). I think we still need that as the reset
value of VGACNTR is 0x0 and thus technically the VGA plane will be
(at least partially) enabled after the power well has been toggled.
In both cases we have the necessary power reference already held
(INIT power domain for load/resume case, and the display power well
itself being what we need for vlv_display_power_well_init()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add some debugs to the VGA plane disable so that we can at least
see from the logs when it happens (and on which pipe). I was curious
about this at some point when I was seeing some random underruns
near the time when we disable the VGA plane, but I think in the end
that turned out to be a red herring.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Imre Deak
Dave Airlie
Jouni Högander
Arun R Murthy
Jani Nikula
Vinod Govindapillai
Nemesa Garg
Jiajia Liu
Animesh Manna
Ville Syrjälä