linux/drivers/net/wireless/ath/ath9k
Christian Lamparter 22d0d5ae7a ath9k: use iowrite32 over __raw_writel
This patch changes the ath9k_pci_owl_loader to use the
same iowrite32 memory accessor that ath9k_pci is using
to communicate with the PCI(e) chip.

This will fix endian issues that came up during testing
with loaned AVM Fritz!Box 7360 (Lantiq MIPS SoCs + AR9287).

Fixes: 5a4f2040fd ("ath9k: add loader for AR92XX (and older) pci(e)")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-28 10:18:51 +02:00
..
Kconfig drivers: net: Fix Kconfig indentation, continued 2019-11-21 11:54:09 -08:00
Makefile ath9k: add loader for AR92XX (and older) pci(e) 2019-09-04 09:12:35 +03:00
ahb.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
ani.c
ani.h
antenna.c ath9k: fix RX_STAT_INC() etc macros 2018-10-13 20:27:35 +03:00
ar953x_initvals.h
ar955x_1p0_initvals.h
ar956x_initvals.h
ar5008_initvals.h
ar5008_phy.c ath9k: ar5008_phy: mark expected switch fall-through 2018-11-05 13:15:24 +02:00
ar9001_initvals.h
ar9002_calib.c ath9k: don't run periodic and nf calibation at the same time 2018-07-31 10:51:43 +03:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c
ar9002_phy.c ath9k: ar9002_phy: mark expected switch fall-throughs 2018-11-05 13:15:34 +02:00
ar9002_phy.h
ar9003_2p2_initvals.h
ar9003_aic.c
ar9003_aic.h
ar9003_buffalo_initvals.h
ar9003_calib.c
ar9003_eeprom.c ath9k_hw: fix uninitialized variable data 2019-10-01 14:18:43 +03:00
ar9003_eeprom.h ath9k: Read noise floor calibration data from eeprom 2018-01-25 07:33:36 +02:00
ar9003_hw.c net: Fix misspellings of "configure" and "configuration" 2019-10-28 13:41:01 -07:00
ar9003_mac.c
ar9003_mac.h
ar9003_mci.c ath9k: remove set but not used variable 'new_flags' 2018-11-05 13:18:34 +02:00
ar9003_mci.h
ar9003_paprd.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
ar9003_phy.c ath9k: drop redundant code in ar9003_hw_set_channel 2019-04-29 17:56:03 +03:00
ar9003_phy.h
ar9003_rtt.c
ar9003_rtt.h
ar9003_wow.c
ar9330_1p1_initvals.h
ar9330_1p2_initvals.h
ar9340_initvals.h
ar9462_2p0_initvals.h
ar9462_2p1_initvals.h
ar9485_initvals.h
ar9565_1p0_initvals.h
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h
ath9k.h ath9k: Switch to mac80211 TXQ scheduling and airtime APIs 2019-02-12 20:44:41 +02:00
ath9k_pci_owl_loader.c ath9k: use iowrite32 over __raw_writel 2019-11-28 10:18:51 +02:00
beacon.c
btcoex.c
btcoex.h
calib.c ath9k: Fix get channel default noise floor 2018-02-07 16:14:08 +02:00
calib.h
channel.c ath9k: use timespec64 for tsf_ts 2018-06-29 14:44:49 +03:00
common-beacon.c
common-beacon.h
common-debug.c ath9k: add counters for good and errorneous FFT/spectral frames 2018-10-02 07:43:32 +03:00
common-debug.h ath9k: add counters for good and errorneous FFT/spectral frames 2018-10-02 07:43:32 +03:00
common-init.c ath9k: spelling s/premble/preamble/ 2018-03-26 18:22:44 +03:00
common-init.h
common-spectral.c ath9k: do not return invalid pointers as a *dentry 2019-02-07 16:59:04 +02:00
common-spectral.h ath9k: fix and simplify FFT max index retrieval 2018-10-02 07:43:56 +03:00
common.c
common.h
debug.c ath9k: debugfs: Fix SPUR-DOWN field 2019-02-26 15:08:16 +02:00
debug.h ath9k: Switch to mac80211 TXQ scheduling and airtime APIs 2019-02-12 20:44:41 +02:00
debug_sta.c ath9k: Switch to mac80211 TXQ scheduling and airtime APIs 2019-02-12 20:44:41 +02:00
dfs.c ath: add support to get the detected radar specifications 2018-05-25 13:15:21 +03:00
dfs.h
dfs_debug.c wireless: Use octal not symbolic permissions 2018-03-27 11:01:13 +03:00
dfs_debug.h
dynack.c ath9k: dynack: set ackto to max timeout in ath_dynack_reset 2019-09-04 09:15:31 +03:00
dynack.h ath9k: dynack: make ewma estimation faster 2018-11-06 18:26:50 +02:00
eeprom.c ath9k: Differentiate between max combined and per chain power 2019-04-29 17:53:43 +03:00
eeprom.h
eeprom_4k.c ath9k: Differentiate between max combined and per chain power 2019-04-29 17:53:43 +03:00
eeprom_9287.c
eeprom_def.c
gpio.c
hif_usb.c ath9k: use irqsave() in USB's complete callback 2018-06-29 14:55:36 +03:00
hif_usb.h
htc.h
htc_drv_beacon.c
htc_drv_debug.c wireless: Use octal not symbolic permissions 2018-03-27 11:01:13 +03:00
htc_drv_gpio.c
htc_drv_init.c ath9k: Remove unneeded variable to store return value 2019-09-10 16:24:27 +03:00
htc_drv_main.c mac80211: simplify TX aggregation start 2019-10-04 13:58:13 +02:00
htc_drv_txrx.c ath9k_htc: Discard undersized packets 2019-10-01 14:49:00 +03:00
htc_hst.c ath9k_htc: release allocated buffer if timed out 2019-09-10 16:28:29 +03:00
htc_hst.h
hw-ops.h
hw.c ath9k: Differentiate between max combined and per chain power 2019-04-29 17:53:43 +03:00
hw.h ath9k: Differentiate between max combined and per chain power 2019-04-29 17:53:43 +03:00
init.c Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git 2019-05-27 15:15:29 +03:00
link.c
mac.c ath9k: add MSI support 2018-01-16 16:29:22 +02:00
mac.h
main.c mac80211: simplify TX aggregation start 2019-10-04 13:58:13 +02:00
mci.c
mci.h
pci.c ath: Use dev_get_drvdata where possible 2019-09-23 11:25:22 +03:00
phy.h
recv.c ath9k: correctly handle short radar pulses 2019-06-27 20:43:40 +03:00
reg.h ath9k: add MSI support 2018-01-16 16:29:22 +02:00
reg_aic.h
reg_mci.h
reg_wow.h
rng.c
tx99.c ath9k: add back support for using active monitor interfaces for tx99 2018-10-02 07:54:26 +03:00
wmi.c ath9k: release allocated buffer if timed out 2019-09-10 16:31:40 +03:00
wmi.h
wow.c
xmit.c ath9k: Remove some set but not used variables 2019-04-29 17:54:52 +03:00