linux/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml

80 lines
1.9 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/bluetooth/marvell,sd8897-bt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO)
maintainers:
- Ariel D'Alessandro <ariel.dalessandro@collabora.com>
allOf:
- $ref: /schemas/net/bluetooth/bluetooth-controller.yaml#
properties:
compatible:
enum:
- marvell,sd8897-bt
- marvell,sd8997-bt
reg:
maxItems: 1
interrupts:
maxItems: 1
marvell,cal-data:
$ref: /schemas/types.yaml#/definitions/uint8-array
description:
Calibration data downloaded to the device during initialization.
maxItems: 28
marvell,wakeup-pin:
$ref: /schemas/types.yaml#/definitions/uint16
description:
Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host
system.
marvell,wakeup-gap-ms:
$ref: /schemas/types.yaml#/definitions/uint16
description:
Wakeup latency of the host platform. Required by the chip sleep feature.
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
mmc {
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
cap-power-off-card;
keep-power-in-suspend;
#address-cells = <1>;
#size-cells = <0>;
bluetooth@2 {
compatible = "marvell,sd8897-bt";
reg = <2>;
interrupt-parent = <&pio>;
interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
marvell,cal-data = /bits/ 8 <
0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0xf0 0x00>;
marvell,wakeup-pin = /bits/ 16 <0x0d>;
marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
};
};
...