linux/drivers/bluetooth
Gongwei Li 525459da4b Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3533 Rev= 1.10
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01 16:21:16 -05:00
..
Kconfig Bluetooth: hci_h5: implement CRC data integrity 2025-12-01 15:58:54 -05:00
Makefile
ath3k.c
bcm203x.c
bfusb.c
bluecard_cs.c
bpa10x.c
bt3c_cs.c
btbcm.c drivers/bluetooth: btbcm: Use kmalloc_array() to prevent overflow 2025-12-01 16:21:16 -05:00
btbcm.h
btintel.c
btintel.h
btintel_pcie.c Bluetooth: btintel_pcie: Introduce HCI Driver protocol 2025-12-01 16:04:51 -05:00
btintel_pcie.h Bluetooth: btintel_pcie: Suspend/Resume: Controller doorbell interrupt handling 2025-12-01 16:00:07 -05:00
btmrvl_debugfs.c
btmrvl_drv.h
btmrvl_main.c
btmrvl_sdio.c
btmrvl_sdio.h
btmtk.c
btmtk.h
btmtksdio.c Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls 2025-12-01 16:00:07 -05:00
btmtkuart.c
btnxpuart.c
btqca.c
btqca.h
btqcomsmd.c
btrsi.c
btrtl.c Bluetooth: btrtl: Add the support for RTL8761CUV 2025-12-01 16:00:07 -05:00
btrtl.h
btsdio.c
btusb.c Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE 2025-12-01 16:21:16 -05:00
dtl1_cs.c
hci_ag6xx.c
hci_aml.c
hci_ath.c
hci_bcm.c Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls 2025-12-01 16:00:07 -05:00
hci_bcm4377.c
hci_bcsp.c
hci_h4.c
hci_h5.c Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls 2025-12-01 16:00:07 -05:00
hci_intel.c Bluetooth: Remove redundant pm_runtime_mark_last_busy() calls 2025-12-01 16:00:07 -05:00
hci_ldisc.c
hci_ll.c
hci_mrvl.c
hci_nokia.c
hci_qca.c
hci_serdev.c
hci_uart.h
hci_vhci.c
virtio_bt.c