linux/arch/powerpc/kernel
Linus Torvalds f536b3cae8 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc new goodies for 3.17.  The short story:

  The biggest bit is Michael removing all of pre-POWER4 processor
  support from the 64-bit kernel.  POWER3 and rs64.  This gets rid of a
  ton of old cruft that has been bitrotting in a long while.  It was
  broken for quite a few versions already and nobody noticed.  Nobody
  uses those machines anymore.  While at it, he cleaned up a bunch of
  old dusty cabinets, getting rid of a skeletton or two.

  Then, we have some base VFIO support for KVM, which allows assigning
  of PCI devices to KVM guests, support for large 64-bit BARs on
  "powernv" platforms, support for HMI (Hardware Management Interrupts)
  on those same platforms, some sparse-vmemmap improvements (for memory
  hotplug),

  There is the usual batch of Freescale embedded updates (summary in the
  merge commit) and fixes here or there, I think that's it for the
  highlights"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
  powerpc/eeh: Export eeh_iommu_group_to_pe()
  powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
  powerpc: Reduce scariness of interrupt frames in stack traces
  powerpc: start loop at section start of start in vmemmap_populated()
  powerpc: implement vmemmap_free()
  powerpc: implement vmemmap_remove_mapping() for BOOK3S
  powerpc: implement vmemmap_list_free()
  powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
  powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
  powerpc/book3s: handle HMIs for cpus in nap mode.
  powerpc/powernv: Invoke opal call to handle hmi.
  powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
  powerpc/iommu: Fix comments with it_page_shift
  powerpc/powernv: Handle compound PE in config accessors
  powerpc/powernv: Handle compound PE for EEH
  powerpc/powernv: Handle compound PE
  powerpc/powernv: Split ioda_eeh_get_state()
  powerpc/powernv: Allow to freeze PE
  powerpc/powernv: Enable M64 aperatus for PHB3
  powerpc/eeh: Aux PE data for error log
  ...
2014-08-07 08:50:34 -07:00
..
vdso32
vdso64
.gitignore
Makefile powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
align.c KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler 2014-05-30 14:26:25 +02:00
asm-offsets.c powerpc: Remove STAB code 2014-07-28 14:10:22 +10:00
audit.c
btext.c
cacheinfo.c
cacheinfo.h
compat_audit.c
cpu_setup_6xx.S
cpu_setup_44x.S
cpu_setup_fsl_booke.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
cpu_setup_pa6t.S
cpu_setup_power.S powerpc/powernv: Enable POWER8 doorbell IPIs 2014-06-11 17:05:12 +10:00
cpu_setup_ppc970.S
cputable.c powerpc: Remove CLASSIC_PPC 2014-07-28 14:11:22 +10:00
crash.c arch,powerpc: Convert smp_mb__*() 2014-04-18 14:20:41 +02:00
crash_dump.c
dbell.c
dma-iommu.c
dma-swiotlb.c
dma.c
eeh.c powerpc/eeh: Export eeh_iommu_group_to_pe() 2014-08-07 13:00:02 +10:00
eeh_cache.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_dev.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_driver.c powerpc/eeh: Replace pr_warning() with pr_warn() 2014-08-05 15:41:34 +10:00
eeh_event.c powerpc/powernv: Fix killed EEH event 2014-06-11 17:04:33 +10:00
eeh_pe.c powerpc/eeh: Aux PE data for error log 2014-08-05 15:41:43 +10:00
eeh_sysfs.c powerpc/eeh: Skip eeh sysfs when eeh is disabled 2014-06-05 13:20:38 +10:00
entry_32.S
entry_64.S powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
epapr_hcalls.S
epapr_paravirt.c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2014-06-10 18:54:22 -07:00
exceptions-64e.S powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
exceptions-64s.S powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
fadump.c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2014-06-10 18:54:22 -07:00
firmware.c
fpu.S
fsl_booke_entry_mapping.S
ftrace.c powerpc/ftrace: Add call to ftrace_graph_is_dead() in function graph code 2014-07-18 13:56:56 -04:00
head_8xx.S
head_32.S
head_40x.S powerpc: Remove check for CONFIG_SERIAL_TEXT_DEBUG 2014-06-11 16:31:21 +10:00
head_44x.S
head_64.S Merge remote-tracking branch 'scott/next' into next 2014-08-05 14:13:41 +10:00
head_booke.h
head_fsl_booke.S
hw_breakpoint.c powerpc: Fix smp_processor_id() in preemptible splat in set_breakpoint 2014-05-20 10:54:06 +10:00
ibmebus.c
idle.c
idle_6xx.S
idle_book3e.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
idle_e500.S
idle_power4.S powerpc: No need to use dot symbols when branching to a function 2014-04-23 10:05:16 +10:00
idle_power7.S powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. 2014-08-05 16:34:01 +10:00
io-workarounds.c
io.c
iomap.c powerpc/kerenl: Enable EEH for IO accessors 2014-06-24 12:43:13 +10:00
iommu.c powerpc/iommu: Fix comments with it_page_shift 2014-08-05 16:33:43 +10:00
irq.c powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
isa-bridge.c
jump_label.c
kgdb.c
kprobes.c powerpc/kprobes: Fix jprobes on ABI v2 (LE) 2014-06-24 14:05:55 +10:00
kvm.c At over 200 commits, covering almost all supported architectures, this 2014-06-04 08:47:12 -07:00
kvm_emul.S
l2cr_6xx.S
legacy_serial.c powerpc/serial: Use saner flags when creating legacy ports 2014-06-05 13:20:36 +10:00
machine_kexec.c
machine_kexec_32.c
machine_kexec_64.c powerpc, kexec: Fix "Processor X is stuck" issue during kexec from ST mode 2014-05-28 13:24:26 +10:00
mce.c
mce_power.c
misc.S
misc_32.S
misc_64.S powerpc: module: handle MODVERSION for .TOC. 2014-04-23 10:05:28 +10:00
module.c
module_32.c
module_64.c powerpc/module: Fix TOC symbol CRC 2014-06-25 13:10:48 +10:00
msi.c
nvram_64.c
of_platform.c
paca.c KVM: PPC: Book3S PR: Rework SLB switching code 2014-05-30 14:26:30 +02:00
pci-common.c powerpc/pci: Remove duplicate logic 2014-07-03 16:45:04 -06:00
pci-hotplug.c powerpc/PCI: Use pci_is_bridge() to simplify code 2014-05-27 14:57:36 -06:00
pci_32.c
pci_64.c powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal 2014-04-14 16:33:49 -06:00
pci_dn.c
pci_of_scan.c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 2014-06-10 18:54:22 -07:00
pmc.c
ppc32.h
ppc_ksyms.c powerpc: memcpy optimization for 64bit LE 2014-04-30 15:26:18 +10:00
ppc_save_regs.S
proc_powerpc.c
process.c powerpc: Reduce scariness of interrupt frames in stack traces 2014-08-05 16:34:28 +10:00
prom.c Merge remote-tracking branch 'scott/next' into next 2014-08-05 14:13:41 +10:00
prom_init.c powerpc/powernv: Remove OPAL v1 takeover 2014-06-25 13:10:47 +10:00
prom_init_check.sh powerpc/powernv: Remove OPAL v1 takeover 2014-06-25 13:10:47 +10:00
prom_parse.c
ptrace.c
ptrace32.c
reloc_32.S
reloc_64.S
rtas-proc.c
rtas-rtc.c
rtas.c of/fdt: update of_get_flat_dt_prop in prep for libfdt 2014-04-30 00:59:15 -05:00
rtas_flash.c powerpc: Fix endianness of flash_block_list in rtas_flash 2014-07-28 11:30:54 +10:00
rtas_pci.c powerpc/eeh: Block PCI-CFG access during PE reset 2014-04-28 17:34:02 +10:00
rtasd.c
setup-common.c Merge remote-tracking branch 'scott/next' into next 2014-08-05 14:13:41 +10:00
setup_32.c
setup_64.c Merge remote-tracking branch 'scott/next' into next 2014-08-05 14:13:41 +10:00
signal.c powerpc: Fix smp_processor_id() in preemptible splat in set_breakpoint 2014-05-20 10:54:06 +10:00
signal.h
signal_32.c powerpc: Remove ancient DEBUG_SIG code 2014-06-24 12:43:14 +10:00
signal_64.c powerpc: Remove ancient DEBUG_SIG code 2014-06-24 12:43:14 +10:00
smp-tbsync.c
smp.c sched: Fix compiler warnings 2014-07-02 08:33:48 +02:00
stacktrace.c
suspend.c
swsusp.c
swsusp_32.S
swsusp_64.c
swsusp_asm64.S
swsusp_booke.S
sys_ppc32.c
syscalls.c
sysfs.c powerpc: Fix regression of per-CPU DSCR setting 2014-05-28 13:35:40 +10:00
systbl.S powerpc: Use standard macros for sys_sigpending() & sys_old_getrlimit() 2014-07-28 14:09:23 +10:00
systbl_chk.c
systbl_chk.sh
tau_6xx.c
time.c clocksource: Get rid of cycle_last 2014-07-23 15:01:52 -07:00
tm.S powerpc: Fix regression of per-CPU DSCR setting 2014-05-28 13:35:40 +10:00
traps.c powerpc/book3s: Add basic infrastructure to handle HMI in Linux. 2014-08-05 16:33:48 +10:00
udbg.c powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
udbg_16550.c powerpc: Remove platforms/wsp and associated pieces 2014-06-11 16:35:38 +10:00
uprobes.c
vdso.c
vecemu.c
vector.S
vio.c
vmlinux.lds.S