mirror of https://github.com/torvalds/linux.git
622865c73a
Add support for the Telit Cinterion FN920C04 module when operating in ECM (Ethernet Control Model) mode. The following USB product IDs are used by the module when AT#USBCFG is set to 3 or 7. 0x10A3: ECM + tty (NMEA) + tty (DUN) [+ tty (DIAG)] T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a3 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10A8: ECM + tty (DUN) + tty (AUX) [+ tty (DIAG)] T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a8 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Adding these IDs allows the option driver to automatically create the corresponding /dev/ttyUSB* ports under ECM mode. Tested with FN920C04 under ECM configuration (USBCFG=3 and 7). Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| Makefile-keyspan_pda_fw | ||
| aircable.c | ||
| ark3116.c | ||
| belkin_sa.c | ||
| belkin_sa.h | ||
| bus.c | ||
| ch341.c | ||
| console.c | ||
| cp210x.c | ||
| cyberjack.c | ||
| cypress_m8.c | ||
| cypress_m8.h | ||
| digi_acceleport.c | ||
| empeg.c | ||
| ezusb_convert.pl | ||
| f81232.c | ||
| f81534.c | ||
| ftdi_sio.c | ||
| ftdi_sio.h | ||
| ftdi_sio_ids.h | ||
| garmin_gps.c | ||
| generic.c | ||
| io_16654.h | ||
| io_edgeport.c | ||
| io_edgeport.h | ||
| io_ionsp.h | ||
| io_ti.c | ||
| io_ti.h | ||
| io_usbvend.h | ||
| ipaq.c | ||
| ipw.c | ||
| ir-usb.c | ||
| iuu_phoenix.c | ||
| iuu_phoenix.h | ||
| keyspan.c | ||
| keyspan_pda.c | ||
| keyspan_usa26msg.h | ||
| keyspan_usa28msg.h | ||
| keyspan_usa49msg.h | ||
| keyspan_usa67msg.h | ||
| keyspan_usa90msg.h | ||
| kl5kusb105.c | ||
| kl5kusb105.h | ||
| kobil_sct.c | ||
| kobil_sct.h | ||
| mct_u232.c | ||
| mct_u232.h | ||
| metro-usb.c | ||
| mos7720.c | ||
| mos7840.c | ||
| mxuport.c | ||
| navman.c | ||
| omninet.c | ||
| opticon.c | ||
| option.c | ||
| oti6858.c | ||
| oti6858.h | ||
| pl2303.c | ||
| pl2303.h | ||
| qcaux.c | ||
| qcserial.c | ||
| quatech2.c | ||
| safe_serial.c | ||
| sierra.c | ||
| spcp8x5.c | ||
| ssu100.c | ||
| symbolserial.c | ||
| ti_usb_3410_5052.c | ||
| upd78f0730.c | ||
| usb-serial-simple.c | ||
| usb-serial.c | ||
| usb-wwan.h | ||
| usb_debug.c | ||
| usb_wwan.c | ||
| visor.c | ||
| visor.h | ||
| whiteheat.c | ||
| whiteheat.h | ||
| wishbone-serial.c | ||
| xr_serial.c | ||
| xsens_mt.c | ||