Andrew Lunn 296739839f net: phy: marvell: Fix double free of hwmon device ... The hwmon temperature sensor devices is registered using a devm_hwmon API call. The marvell_release() would then manually free the device, not using a devm_hmon API, resulting in the device being removed twice, leading to a crash in kernfs_find_ns() during the second removal. Remove the manual removal, which makes marvell_release() empty, so remove it as well. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 0b04680fda ("phy: marvell: Add support for temperature sensor") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-03-09 22:41:03 -08:00
..
Kconfig	net: phy: Add Meson GXL PHY hardware dependency	2017-01-09 16:34:39 -05:00
Makefile	net: phy: Allow pre-declaration of MDIO devices	2017-02-07 10:51:46 -05:00
amd.c	…
aquantia.c	…
at803x.c	…
bcm-cygnus.c	…
bcm-phy-lib.c	…
bcm-phy-lib.h	…
bcm7xxx.c	net: phy: bcm7xxx: Add BCM74371 PHY ID	2017-02-07 13:03:10 -05:00
bcm63xx.c	net: phy: bcm63xx: Utilize correct config_intr function	2017-01-18 16:56:10 -05:00
bcm87xx.c	…
broadcom.c	net: phy: broadcom: rehook BCM54612E specific init	2017-02-01 14:20:20 -05:00
cicada.c	…
davicom.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
dp83640.c	…
dp83640_reg.h	…
dp83848.c	net: phy: dp83848: add DP83620 PHY support	2017-01-17 15:47:25 -05:00
dp83867.c	net: phy: dp83867: Recover from "port mirroring" N/A MODE4	2017-02-07 13:59:27 -05:00
et1011c.c	…
fixed_phy.c	…
icplus.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
intel-xway.c	…
lxt.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
marvell.c	net: phy: marvell: Fix double free of hwmon device	2017-03-09 22:41:03 -08:00
mdio-bcm-iproc.c	net: phy: Initialize mdio clock at probe function	2017-02-09 17:10:23 -05:00
mdio-bcm-unimac.c	…
mdio-bitbang.c	…
mdio-boardinfo.c	net: phy: Allow pre-declaration of MDIO devices	2017-02-07 10:51:46 -05:00
mdio-boardinfo.h	net: phy: Allow pre-declaration of MDIO devices	2017-02-07 10:51:46 -05:00
mdio-cavium.c	…
mdio-cavium.h	…
mdio-gpio.c	net: mdio-gpio: Use gpio subsystem to handle low-active pins	2017-01-12 15:05:10 -05:00
mdio-hisi-femac.c	…
mdio-moxart.c	…
mdio-mux-bcm-iproc.c	…
mdio-mux-gpio.c	…
mdio-mux-mmioreg.c	…
mdio-mux.c	…
mdio-octeon.c	…
mdio-sun4i.c	…
mdio-thunder.c	…
mdio-xgene.c	xgene_enet: remove bogus forward declarations	2017-02-02 17:12:20 -05:00
mdio-xgene.h	xgene_enet: remove bogus forward declarations	2017-02-02 17:12:20 -05:00
mdio_bus.c	net: phy: Allow pre-declaration of MDIO devices	2017-02-07 10:51:46 -05:00
mdio_device.c	net: phy: Allow pre-declaration of MDIO devices	2017-02-07 10:51:46 -05:00
meson-gxl.c	…
micrel.c	net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause	2017-01-29 18:45:15 -05:00
microchip.c	…
mscc.c	net: phy: Add LED mode driver for Microsemi PHYs.	2017-02-08 13:29:04 -05:00
national.c	…
phy.c	net: phy: Add missing driver check in phy_aneg_done()	2017-02-24 11:42:55 -05:00
phy_device.c	net: phy: Do not perform software reset for Generic PHY	2017-03-05 17:57:27 -08:00
phy_led_triggers.c	net: phy: leds: Break dependency of phy.h on phy_led_triggers.h	2017-01-25 14:40:19 -05:00
qsemi.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
realtek.c	…
smsc.c	…
spi_ks8995.c	spi_ks8995: regs_size incorrect for some devices	2017-03-07 13:33:24 -08:00
ste10Xp.c	…
swphy.c	…
swphy.h	…
teranetics.c	…
vitesse.c	…
xilinx_gmii2rgmii.c	…