linux/include
André Draszik 030158c052
regulator: dt-bindings: add s2mpg11-pmic regulators
The S2MPG11 PMIC is a Power Management IC for mobile applications with
buck converters, various LDOs, power meters, NTC thermistor inputs, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC.

S2MPG11 has 12 buck, 1 buck-boost, and 15 LDO rails. Several of these
can either be controlled via software (register writes) or via external
signals, in particular by:
    * one out of several input pins connected to a main processor's:
        *  GPIO pins
        * other pins that are e.g. firmware- or power-domain-controlled
          without explicit driver intervention
    * a combination of input pins and register writes.

Control via input pins allows PMIC rails to be controlled by firmware,
e.g. during standby/suspend, or as part of power domain handling where
otherwise that would not be possible. Additionally toggling a pin is
faster than register writes, and it also allows the PMIC to ensure that
any necessary timing requirements between rails are respected
automatically if multiple rails are to be enabled or disabled quasi
simultaneously.

While external control via input pins appears to exist on other
versions of this PMIC, there is more flexibility in this version, in
particular there is a selection of input pins to choose from for each
rail (which must therefore be configured accordingly if in use),
whereas other versions don't have this flexibility.

Add documentation related to the regulator (buck & ldo) parts like
devicetree definitions, regulator naming patterns, and additional
properties.

Since S2MPG11 is typically used as the sub-PMIC together with an
S2MPG10 as the main-PMIC, the datasheet and the binding both suffix the
rails with an 's'.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-3-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-04 13:35:31 +00:00
..
acpi
asm-generic hyperv-next for v6.19 2025-12-09 06:10:17 +09:00
clocksource
crypto This update includes the following changes: 2025-12-03 11:28:38 -08:00
cxl
drm Cross-subsystem Changes: 2025-12-05 10:16:25 +10:00
dt-bindings regulator: dt-bindings: add s2mpg11-pmic regulators 2026-02-04 13:35:31 +00:00
hyperv mshv: Add definitions for MSHV sleep state configuration 2025-12-05 23:24:57 +00:00
keys
kunit
kvm
linux mfd: sec: Add support for S2MPG11 PMIC via ACPM 2026-02-04 10:37:29 +00:00
math-emu
media
memory
misc
net - fix a bug with O_APPEND in cached mode causing data to be written multiple times on server 2025-12-07 08:29:09 -08:00
pcmcia
ras Significant patch series in this merge are as follows: 2025-12-05 13:52:43 -08:00
rdma
rv
scsi
soc This pull request is entirely SoC clk drivers, not for lack of trying to modify 2025-12-08 09:38:52 +09:00
sound soundwire updates for 6.19 2025-12-13 16:26:55 +12:00
target
trace We have a patch that adds an initial set of tracepoints to the MDS 2025-12-14 15:24:10 +12:00
uapi sound fixes for 6.19-rc1 2025-12-13 16:09:10 +12:00
ufs
vdso
video
xen
Kbuild