mirror of https://github.com/torvalds/linux.git
5fb0249319
Core changes:
- Allow pins to be identified/marked as GPIO mode with
a special callback. The pin controller core is now
"aware" if a pin is in GPIO mode if the callback is
implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a
line as GPIO and another function such as I2C. This
is enabled in the Qualcomm TLMM driver and also
implemeted from day 1 in the new Broadcom STB driver.
- Rename the pin config option PIN_CONFIG_OUTPUT to
PIN_CONFIG_LEVEL to better describe what the config is
doing, as well as making it more intuitive what shall
be returned when reading this property.
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver.
- Qualcomm Glymur family pin controller driver.
- Broadcom STB family pin controller driver.
- Tegra186 pin controller driver.
- AAEON UP pin controller support. This is some special
pin controller that works as an external advanced line
MUX and amplifier for signals from an Intel SoC.
A cooperative effort with the GPIO maintainer was
needed to reach a solution where we reuse code from
the GPIO aggregator/forwarder driver.
- Renesas RZ/T2H and RZ/N2H pin controller support.
- Axis ARTPEC-8 subdriver for the Samsung pin controller
driver.
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver.
- Properly support bias pull up/down in the pinctrl-single
driver.
- Move over all GPIO portions using generic MMIO GPIO to
the new generic GPIO chip management which has a nice and
separate API.
- Proper DT bindings for some older Broadcom SoCs.
- External GPIO (EGPIO) support in the Qualcomm SM8250.
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers.
-----BEGIN PGP SIGNATURE-----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=DZy/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| pinctrl-ab8500.c | ||
| pinctrl-ab8505.c | ||
| pinctrl-abx500.c | ||
| pinctrl-abx500.h | ||
| pinctrl-nomadik-db8500.c | ||
| pinctrl-nomadik-stn8815.c | ||
| pinctrl-nomadik.c | ||