The mouse portion of the device's Report Descriptor declares 5 buttons but only
declares 3 usages (Button 1 through Button 3). As a result events for the 2
side buttons are not generated.
Detect and repair the Report Descriptor if necessary by changing the Usage
Maximum value from Button 3 to Button 5.
[jkosina@suse.com: standardize changelog a little bit]
Reported-by: Artem <temabiill@gmail.com>
Closes: https://lore.kernel.org/all/CADYkRmrfhRf6VmQjc+su+mepyv=TsHc+aMcL6ryRZ5HTZ8pyFg@mail.gmail.com/
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Tested-by: Artem <temabiill@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.
Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:
MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1
when the kernel is compiled with the following configuration:
CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m
To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.
For a more detailed discussion, see [1].
[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for Orion2 throttle configurations with more than 32 buttons
on the grip handle (this means the device reports more than 80 buttons).
Map additional button codes to KEY_MACRO1 .. KEY_MACRO28.
Make the module simpler, removing report descriptor fixup.
[jkosina@suse.com: fix changelog]
Signed-off-by: Ivan Gorinov <linux-kernel@altimeter.info>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.
So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Define a new structure that contains simple haptic device configuration
as well as current state.
Add functions that recognize auto trigger and manual trigger reports
as well as save their addresses.
Verify that the pressure unit is either grams or newtons.
Mark the input device as a haptic touchpad if the unit is correct and
the reports are found.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit 84c9d2a968 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd
Fn keys") added a dependency on ACPI's platform_profile. This should not
be done for generic USB devices as this prevents using the devices on
non ACPI devices like Apple silicon Macs and other non-ACPI arm64
systems. An attempt to allow using platform_profile on non-ACPI systems
was rejected in [1] and instead platform_profile was made to fail during
init in commit dd133162c9 ("ACPI: platform_profile: Avoid initializing
on non-ACPI platforms").
So remove the broken dependency and instead let's user space handle this
keycode by sending the new KEY_PERFORMANCE. Stable backport depends on
commit 89c5214639 ("Input: add keycode for performance mode key").
[1]: https://lore.kernel.org/linux-acpi/CAJZ5v0icRdTSToaKbdf=MdRin4NyB2MstUVaQo8VR6-n7DkVMQ@mail.gmail.com/
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: 84c9d2a968 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys")
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in the HID_U2FZERO description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds the device ID of Apple Touch Bar found on x86 MacBook Pros
to the hid-multitouch driver.
Note that this is device ID is for T2 Macs. Testing on T1 Macs would be
appreciated.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Apple Touch Bar is only present on x86 MacBook Pros. Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel for a different architecture.
Fixes: 1fd41e5e3d ("HID: hid-appletb-bl: add driver for the backlight of Apple Touch Bars")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Apple Touch Bar is only present on x86 MacBook Pros. Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel for a different architecture.
Fixes: 8e9b9152cf ("HID: hid-appletb-kbd: add driver for the keyboard mode of Apple Touch Bars")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
The test bot found an issue with building hid-lg-g15.
All errors (new ones prefixed by >>):
powerpc-linux-ld: drivers/hid/hid-lg-g15.o: in function `lg_g510_kbd_led_write':
>> drivers/hid/hid-lg-g15.c:241:(.text+0x768): undefined reference to `led_mc_calc_color_components'
powerpc-linux-ld: drivers/hid/hid-lg-g15.o: in function `lg_g15_register_led':
>> drivers/hid/hid-lg-g15.c:686:(.text+0xa9c): undefined reference to `devm_led_classdev_multicolor_register_ext'
Since multicolor LED APIs manage the keyboard backlight settings of
hid-lg-g15, the LEDS_CLASS_MULTICOLOR dependency was added to
HID_LOGITECH.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502110032.VZ0J024X-lkp@intel.com/
Fixes: a3a064146c ("HID: hid-lg-g15: Use standard multicolor LED API")
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On Windows, if there is no input by the user for 60 sec, the Touch Bar dims
automatically, and after further 15 sec, it turns off. On receiving input,
the Touch Bar resets the timer and goes back to full brightness. This patch
implements the same functionality.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed. This commit adds a driver for the
display functionality of the first configuration.
Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<ronald@innovation.ch>.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit adds a driver for the backlight of Apple Touch Bars on x86
Macs. Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<ronald@innovation.ch>.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Extend pidff compatibility, usable button range, manage pidff quirks and
set improved fuzz/flat default for high precision devices. Possibility
of fixing device descriptors in the future if such needs arises.
As many of PID devices are quite similar and not dependent on
custom drivers, this one can handle all of PID devices which
need special care.
Numerous sim racing/sim flight bases report a lot of buttons
in excess of 100. Moza Racing exposes 128 of them and thus
the need to extend the available range.
All the included devices were tested and confirmed working
with the help of the sim racing community.
Changes in v6:
- Support "split" devices with a separate "input device" for buttons
- Fixed comment styling
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A previous patch tried to fix this link failure:
x86_64-linux-ld: drivers/hid/hid-lenovo.o: in function `lenovo_raw_event':
hid-lenovo.c:(.text+0x22c): undefined reference to `platform_profile_cycle'
but got it wrong in three ways:
- the link failure still exists with CONFIG_ACPI_PLATFORM_PROFILE=m
when hid-lenovo is built-in
- There is no way to manually enable CONFIG_ACPI_PLATFORM_PROFILE, as
it is intended to be selected by its users.
Remove the broken #if check again and instead select the symbol like
the other users do. This requires adding a dependency on CONFIG_ACPI.
Fixes: 52e7d1f7c2 ("HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The NSO MD/GEN 6B was a Japan-only controller released which has
6 buttons on the face of the controller. This adds support for this
controller. It still enumerates just like the 3B controller, but
will use extra bits in it's report for the 3 extra controllers. This
also changes the events reported to match the letter on the controller
for the NSO MD/GEN controller. The VID/PID it reports is the same as
the 3B controller.
This also removes a comment on the N64 Controllers which didn't
mean anything.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add `select RMI4_F3A` under `HID_RMI` in Kconfig to support buttons and GPIOs
on newer Synaptics HID RMI devices. Future devices will use F3A instead of F30,
but F30 is still selected for backward compatibility.
Signed-off-by: Vincent Huang <vincenth@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In this initial the battery is only probed once, a following patch will add
periodic checking.
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduce a driver for the Corsair Void family of headsets, supporting:
- Battery reporting (power_supply)
- Sidetone setting support
- Physical microphone location reporting
- Headset and receiver firmware version reporting
- Built-in alert triggering
- USB wireless_status
Tested with a Void Pro Wireless, Void Elite Wireless and a Void Elite Wired
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch introduces a new driver to support the Goodix GT7986U
touch controller. This device is not compatible with Microsoft's
HID-over-SPI protocol and therefore needs to implement its own
flavor. The data reported is packaged according to the HID
protocol but uses SPI for communication to improve speed. This
enables the device to transmit not only coordinate data but also
corresponding raw data that can be accessed by user-space programs
through the hidraw interface. The raw data can be utilized for
functions like palm rejection, thereby improving the touch experience.
Key features:
- Device connection confirmation and initialization
- IRQ-based event reporting to the input subsystem
- Support for HIDRAW operations (GET_REPORT and SET_REPORT)
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
WinWing Orion2 throttle works with Linux out of box,
but the kernel sees only 16 of 47 buttons on the throttle base.
This module enables all buttons, and also adds LED controls.
Button numbers 0 .. 63 on Orion2 are reserved for throttle grip;
the throttle base buttons have numbers 64 .. 110.
Linux kernel HID subsystem only supports up to 80 buttons.
Remap throttle base buttons to numbers 32 .. 78,
reserving only numbers 0 .. 31 for buttons on the grip handle.
Changes since v2:
- Fixed automatic line wraps added by mail client
Changes since v1:
- Fixed formatting of descriptor byte array;
- Using product codes of Winwing grips in config.
Signed-off-by: Ivan Gorinov <ivan.gorinov@jobyaviation.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This adds support for the nintendo switch online controllers which
include the SNES, Genesis, and N64 Controllers.
As each nso controller only implements a subset of what a pro
controller can do. Each of these 'features' were broken up in to
seperate functions which include right stick, left stick, imu, and
dpad and depending on the controller type that it is, it will call
the supported functions appropriately.
Each controller now has a struct which maps the bit within the hid
in report to a button.
The name given to the device now comes directly from the hid
device name rather than looking up a predefined string.
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Tested-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Added a gpiochip compatible driver to control the 8 GPIOs of
the MCP2200 by using the HID interface.
Using GPIOs with alternative functions (GP0<->SSPND, GP1<->USBCFG,
GP6<->RXLED, GP7<->TXLED) will reset the functions, if set (unset by
default).
The driver was tested while also using the UART of the chip. Setting
and reading the GPIOs has no effect on the UART communication. However,
a reset is triggered after the CONFIGURE command. If the GPIO Direction
is constantly changed, this will affect the communication at low baud
rates. This is a hardware problem of the MCP2200 and is not caused by
the driver.
Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>
Reviewed-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Battery information reported by the driver depends on the power supply
subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig
option is enabled.
Fixes: 3ab196f882 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
The hid-nvidia-shield driver uses functions that are built
only when LEDS_CLASS is set, so make the driver depend on that
symbol to prevent build errors.
riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L11':
hid-nvidia-shield.c:(.text+0x192): undefined reference to `led_classdev_unregister'
riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L113':
hid-nvidia-shield.c:(.text+0xfa4): undefined reference to `led_classdev_register_ext'
Fixes: 09308562d4 ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with an fbdev initializer macro.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-7-tzimmermann@suse.de
Add a hid-google-stadiaff module to support rumble based force feedback
on the Google Stadia controller. This works using the HID output
endpoint exposed on both the USB and BLE interface.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the Steelseries Arctis 1 XBox headset. This driver
will export the battery information from the headset, as well as the
"wireless_status" property.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Supports the Thunderstrike (SHIELD 2017) controller. Implements support for
the Thunderstrike HOSTCMD firmware interface. Adds sysfs attributes about a
SHIELD device and introduces haptics support for controllers.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina
Terry Junge
Linus Torvalds
Jonathan Denose
Ivan Gorinov
Mukesh Rathor
Benjamin Tissoires
Angela Czubak
Janne Grunau
Colin Ian King
Kerem Karabay
Geert Uytterhoeven
Kate Hsuan
Aditya Garg
Daniel Brackenbury
Tomasz Pakuła
Arnd Bergmann
Xinpeng Sun
Ryan McClelland
Vincent Huang
Lode Willems
Stuart Hayhurst
Charles Wang
Johannes Roith
Dave Airlie
Rahul Rameshbabu
Randy Dunlap
Thomas Zimmermann
Fabio Baltieri
Bastien Nocera
Jiri Kosina