`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it.
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250802164436.515988-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When stress-testing the system by repeatedly unbinding and binding the ADC
device in a loop, and the ADC is a supplier for another device (e.g., a
thermal hardware block that reads temperature through the ADC), it may
happen that the ADC device is runtime-resumed immediately after runtime PM
is enabled, triggered by its consumer. At this point, since drvdata is not
yet set and the driver's runtime PM callbacks rely on it, a crash can
occur. To avoid this, set drvdata just after it was allocated.
Fixes: 89ee8174e8 ("iio: adc: rzg2l_adc: Simplify the runtime PM code")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250810123328.800104-3-claudiu.beznea.uj@bp.renesas.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no need to manually track the runtime PM status in the driver.
The pm_runtime_force_suspend() and pm_runtime_force_resume() functions
already call pm_runtime_status_suspended() to check the runtime PM state.
Additionally, avoid calling pm_runtime_put_autosuspend() during the
suspend/resume path, as this would decrease the usage counter of a
potential user that had the ADC open before the suspend/resume cycle.
Fixes: 563cf94f93 ("iio: adc: rzg2l_adc: Add suspend/resume support")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250810123328.800104-2-claudiu.beznea.uj@bp.renesas.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The bd79124 has ADC inputs which can be muxed to be GPIOs. The driver
supports this by registering a GPIO-chip for channels which aren't used
as ADC.
The Kconfig entry does not handle the dependency to GPIOLIB, which
causes errors:
ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/iio/adc/rohm-bd79124.ko] undefined!
ERROR: modpost: "gpiochip_get_data" [drivers/iio/adc/rohm-bd79124.ko] undefined!
at linking phase if GPIOLIB is not configured to be used.
Fix this by adding dependency to the GPIOLIB.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508131533.5sSkq80B-lkp@intel.com/
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/6837249bddf358924e67566293944506206d2d62.1755076369.git.mazziesaccount@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250808-inv-icm42600-change-temperature-error-code-v1-1-986fbf63b77d@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix possible incorrect channel lookup in the syscalib functions by using
the correct channel address instead of the channel number.
In the ad7124 driver, the channel field of struct iio_chan_spec is the
input pin number of the positive input of the channel. This can be, but
is not always the same as the index in the channels array. The correct
index in the channels array is stored in the address field (and also
scan_index). We use the address field to perform the correct lookup.
Fixes: 47036a03a3 ("iio: adc: ad7124: Implement internal calibration at probe time")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250726-iio-adc-ad7124-fix-channel-lookup-in-syscalib-v1-1-b9d14bb684af@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace using stack-allocated buffers with a DMA-safe buffer for use
with spi_read(). This allows the driver to be safely used with
DMA-enabled SPI controllers.
The buffer array is also converted to a struct with a union to make the
usage of the memory in the buffer more clear and ensure proper alignment.
Fixes: 1f25ca11d8 ("iio: temperature: add support for Maxim thermocouple chips")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3-v2-1-0c68d41ccf6c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a check to ad7173_update_scan_mode() to ensure that we didn't exceed
the maximum number of unique channel configurations.
In the AD7173 family of chips, there are some chips that have 16
CHANNELx registers but only 8 setups (combination of CONFIGx, FILTERx,
GAINx and OFFSETx registers). Since commit 92c2472169 ("iio: adc:
ad7173: fix num_slots"), it is possible to have more than 8 channels
enabled in a scan at the same time, so it is possible to get a bad
configuration when more than 8 channels are using unique configurations.
This happens because the algorithm to allocate the setup slots only
takes into account which slot has been least recently used and doesn't
know about the maximum number of slots available.
Since the algorithm to allocate the setup slots is quite complex, it is
simpler to check after the fact if the current state is valid or not.
So this patch adds a check in ad7173_update_scan_mode() after setting up
all of the configurations to make sure that the actual setup still
matches the requested setup for each enabled channel. If not, we prevent
the scan from being enabled and return an error.
The setup comparison in ad7173_setup_equal() is refactored to a separate
function since we need to call it in two places now.
Fixes: 92c2472169 ("iio: adc: ad7173: fix num_slots")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-adc-ad7173-fix-setup-use-limits-v2-1-8e96bdb72a9c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix passing a u32 value as a u16 buffer scan item. This works on little-
endian systems, but not on big-endian systems.
A new local variable is introduced for getting the register value and
the array is changed to a struct to make the data layout more explicit
rather than just changing the type and having to recalculate the proper
length needed for the timestamp.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-use-more-iio_declare_buffer_with_ts-7-v2-1-d3ebeb001ed3@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
the diff is all the new Qualcomm clk drivers added for a few SoCs they're
working on. The other two vendors with significant work this cycle are Renesas
and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some
new SoCs while Amlogic is starting a significant refactoring to simplify their
code.
The core framework gained a pair of helpers to get the 'struct device' or
'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit
tests were added for these simple helpers as well. Beyond that core change
there are lots of little fixes throughout the clk drivers for the stuff we see
every day, wrong clk driver data that affects tree topology or supported
frequencies, etc. They're not found until the clks are actually used by some
consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the
Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis tools and
possibly real humans
- A lot of little fixes here and there to things like clk tree topology,
missing frequencies, flagging clks as critical, etc. The full details are in
the commits and sub-tree merge logs
-----BEGIN PGP SIGNATURE-----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=S+dB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
CONFIG_AD_SIGMA_DELTA uses several symbols that it does not explicitly
select. If no other enabled driver selects them, the build fails with
either a linker failure if the driver is built in or a modpost failure
if the driver is a module.
ld.lld: error: undefined symbol: devm_spi_offload_rx_stream_request_dma_chan
ld.lld: error: undefined symbol: devm_iio_dmaengine_buffer_setup_with_handle
ld.lld: error: undefined symbol: devm_spi_offload_trigger_get
ld.lld: error: undefined symbol: devm_spi_offload_get
ld.lld: error: undefined symbol: spi_offload_trigger_enable
ld.lld: error: undefined symbol: spi_offload_trigger_disable
Select the necessary Kconfig symbols to include these functions in the
build to clear up the errors.
Fixes: 219da3ea84 ("iio: adc: ad_sigma_delta: add SPI offload support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250714-iio-ad_sigma_delta-fix-kconfig-selects-v1-1-32e0d6da0423@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the setting of the ODR register value in the probe function for
AD7177. The AD7177 chip has a different ODR value after reset than the
other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.
The driver already has this information available in odr_start_value
and uses it when checking valid values when writing to the
sampling_frequency attribute, but failed to set the correct initial
value in the probe function.
Fixes: 37ae8381cc ("iio: adc: ad7173: add support for additional models")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250710-iio-adc-ad7173-fix-setting-odr-in-probe-v1-1-78a100fec998@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the channel index values passed to ad_sd_calibrate() in
ad7173_calibrate_all().
ad7173_calibrate_all() expects these values to be that of the CHANNELx
register assigned to the channel, not the datasheet INPUTx number of the
channel. The incorrect values were causing register writes to fail for
some channels because they set the WEN bit that must always be 0 for
register access and set the R/W bit to read instead of write. For other
channels, the channel number was just wrong because the CHANNELx
registers are generally assigned in reverse order and so almost never
match the INPUTx numbers.
Fixes: 031bdc8aee ("iio: adc: ad7173: add calibration support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250708-iio-adc-ad7313-fix-calibration-channel-v1-1-e6174e2c7cbf@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the num_slots value for most chips in the ad7173 driver. The correct
value is the number of CHANNELx registers on the chip.
In commit 4310e15b31 ("iio: adc: ad7173: don't make copy of
ad_sigma_delta_info struct"), we refactored struct ad_sigma_delta_info
to be static const data instead of being dynamically populated during
driver probe. However, there was an existing bug in commit 76a1e6a428
("iio: adc: ad7173: add AD7173 driver") where num_slots was incorrectly
set to the number of CONFIGx registers instead of the number of
CHANNELx registers. This bug was partially propagated to the refactored
code in that the 16-channel chips were only given 8 slots instead of
16 although we did managed to fix the 8-channel chips and one of the
4-channel chips in that commit. However, we botched two of the 4-channel
chips and ended up incorrectly giving them 8 slots during the
refactoring.
This patch fixes that mistake on the 4-channel chips and also
corrects the 16-channel chips to have 16 slots.
Fixes: 4310e15b31 ("iio: adc: ad7173: don't make copy of ad_sigma_delta_info struct")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250706-iio-adc-ad7173-fix-num_slots-on-most-chips-v3-1-d1f5453198a7@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access.
Fixes: 031bdc8aee ("iio: adc: ad7173: add calibration support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250703-iio-adc-ad7173-fix-channels-index-for-syscalib_mode-v1-1-7fdaedb9cac0@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the buffer disable callback from postdisable to predisable.
This balances the existing posteanble callback. Using postdisable
with posteanble can be problematic, for example, if update_scan_mode
fails, it would call postdisable without ever having called posteanble,
so the drivers using this would be in an unexpected state when
postdisable was called.
Fixes: af3008485e ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250703-iio-adc-ad_sigma_delta-buffer-predisable-v1-1-f2ab85138f1f@baylibre.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nicera D3-323-AA is a PIR sensor for human detection. It has support for
raw data measurements and detection notification. The communication
protocol is custom made and therefore needs to be GPIO bit banged.
The device has two main settings that can be configured: a threshold
value for detection and a band-pass filter. The configurable parameters
for the band-pass filter are the high-pass and low-pass cutoff
frequencies and its peak gain. Map these settings to the corresponding
parameters in the `iio` framework.
Raw data measurements can be obtained from the device. However, since we
rely on bit banging, it will be rather cumbersome with buffer support.
The main reason being that the data protocol has strict timing
requirements (it's serial like UART), and it's mainly used during
debugging since in real-world applications only the event notification
is of importance. Therefore, only add support for events (for now).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/29f84da1431f4a3f17fdeef27297a4ab14455404.1751636734.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Driver is getting clock and almost immediately enabling it, with no
relevant code executed between, thus the probe path and cleanups can be
simplified with devm_clk_get_enabled().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250713-iio-clk-get-enabled-v1-4-70abc1f9ce6c@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250713-iio-clk-get-enabled-v1-3-70abc1f9ce6c@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add const qualifier to struct bno055_sysfs_attr and its array fields.
All of this is read-only data so it can be made const.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-2-fb3fc9191251@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Motivated by the W=1 warning about export.h that was introduced this cycle
this is an attempt to apply an approximation of the principles of including
whatever is used in the file directly.
Helped by the include-what-you-use tool.
Reasoning:
- Drop linux/moduleparam.h as completely unused.
- linux/array_size.h for ARRAY_SIZE()
- linux/bitmap.h for for_each_set_bit
- linux/errno.h for error codes.
- linux/export.h for EXPORT_SYMBOL*()
- linux/math64.h for do_div - alternative would be asm/div64.h
- linux/minmax.h for min()
- linux/sysfs.h for sysfs_emit()
- linux/time64.h for USEC_PER_MSEC
- linux/iio/buffer.h for iio_push_to_buffers_with_timestamp()
- asm/byteorder.h for le16_to_cpu()
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250629183649.184479-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 design provides features to aid interfacing with weigh scales,
thermocouples, and RTD sensors, which are set up with additional circuitry
for proper sensor operation. A key characteristic of those sensors is that
the circuit they are in must be excited with a single, a pair, or two pairs
of signals. The external circuit can be excited either by a voltage supply
or by AD4170-4 excitation signals. The sensor can then be read through a
different pair of lines that are connected to the AD4170-4 ADC.
Extend the ad4170-4 driver to handle external circuit sensors.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/52686943040ecad34cc89833d4d5d37f1a51f412.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 has an internal temperature sensor that can be read using the
ADC. Whenever possible, configure an IIO channel to provide the chip's
temperature.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/71ac994060cf79a6c49f39b0c7d04c6c9cbbab00.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 has four multifunctional pins that can be used as GPIOs. The
GPIO functionality can be accessed when the AD4170-4 chip is not busy
performing continuous data capture or handling any other register
read/write request. Also, the AD4170-4 does not provide any interrupt based
on GPIO pin states so AD4170-4 GPIOs can't be used as interrupt sources.
Implement gpio_chip callbacks to make AD4170-4 GPIO pins controllable
through the gpiochip interface.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/e031189d4b7e20cf02dd13220ab1ddf4798760c2.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 chip can use an externally supplied clock at the XTAL2 pin, or
an external crystal connected to the XTAL1 and XTAL2 pins. Alternatively,
the AD4170-4 can provide its 16 MHz internal clock at the XTAL2 pin. In
addition, the chip has a programmable clock divider that allows dividing
the external or internal clock frequency, however, control for that is not
provided in this patch. Extend the AD4170-4 driver so it effectively uses
the provided external clock, if any, or supplies its own clock as a clock
provider.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/68697c7613b1a69d752e541caef28d08b3e59bc1.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the AD4170-4 driver to allow buffered data capture in continuous
read mode. In continuous read mode, the chip skips the instruction phase
and outputs just ADC sample data, enabling faster sample rates to be
reached. The internal channel sequencer always starts sampling from channel
0 and channel 0 must be enabled if more than one channel is selected for
data capture. The scan mask validation callback checks if the
aforementioned condition is met.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/10ed544d31aa86eb40f93ea947f151d3d9827952.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 is a multichannel, low noise, 24-bit precision sigma-delta
analog to digital converter. The AD4170-4 design offers a flexible data
acquisition solution with crosspoint multiplexed analog inputs,
configurable ADC voltage reference inputs, ultra-low noise integrated PGA,
digital filtering, wide range of configurable output data rates, internal
oscillator and temperature sensor, four GPIOs, and integrated features for
interfacing with load cell weigh scales, RTD, and thermocouple sensors.
Add basic support for the AD4170-4 ADC with the following features:
- Single-shot read.
- Analog front end PGA configuration.
- Differential and pseudo-differential input configuration.
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Co-developed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/ce3fd150bd63a2aed6eb6fe59aad6d60c0f9fb67.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bulk FIFO reading can be streamlined by eliminating redundant variables and
simplifying the process of reading x-, y-, and z-axis measurement sets.
This is a refactoring change with no expected impact on functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250702230315.19297-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the sensor interrupt mapping by utilizing regmap_assign_bits(),
which accepts a boolean value directly. Introduce a helper function to
streamline the identification of the configured interrupt line pin. Also,
use identifiers from units.h to represent the full 8-bit register when
setting bits.
This is a purely refactoring change and does not affect functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230315.19297-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce AC-coupled activity and inactivity as MAG_ADAPTIVE events.
This adds a new set of threshold and duration configuration options,
ensures proper handling of event disabling, and extends the use of the
link bit to support complementary event configurations.
For example, either ACTIVITY or ACTIVITY_AC can be enabled, but only the
most recently set configuration will remain active. Disabling ACTIVITY
will have no effect if ACTIVITY_AC is currently enabled, as the event
types must match (i.e., ACTIVITY_AC must be explicitly disabled). When
either INACTIVITY or INACTIVITY_AC is enabled alongside an activity
event, the link bit is set.
With the link bit and auto-sleep enabled, activity and inactivity events
represent changes in the sensor's power-saving state and are only
triggered upon actual state transitions. Since AC coupling uses separate
bits for activity and inactivity, each can be configured independently.
For instance, ACTIVITY can be linked with INACTIVITY_AC.
If one of the linked events is disabled, the link bit is cleared. In
that case, the remaining event will no longer reflect a state transition
but will instead trigger based on periodic inactivity or whenever the
activity threshold is exceeded.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-8-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Configure the link bit to associate activity and inactivity sensing,
allowing the sensor to reflect its internal power-saving state.
Additionally, enable the auto-sleep bit to transition the sensor into
auto-sleep mode during periods of inactivity, as outlined in the
datasheet.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250702230819.19353-7-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enhance the interrupt handler to process inactivity events. Introduce
functions to configure the threshold and period registers for
inactivity detection, as well as to enable or disable the inactivity
feature. Extend the fake IIO channel to handle inactivity events by
combining the x, y, and z axes using a logical AND operation.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-6-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for configuring an activity detection threshold. Extend the
interrupt handler to process activity-related interrupts, and provide
functions to set the threshold as well as to enable or disable activity
sensing. Additionally, introduce a virtual channel that represents the
logical AND of the x, y, and z axes in the IIO channel.
This patch serves as a preparatory step; some definitions and functions
introduced here are intended to be extended later to support inactivity
detection.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-5-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cover the following tasks:
- Add scan_mask and scan_index to the IIO channel configuration. The
scan_index sets up buffer usage. According to the datasheet, the ADXL313
uses a 13-bit wide data field in full-resolution mode. Set the
signedness, number of storage bits, and endianness accordingly.
- Parse the devicetree for an optional interrupt line and configure the
interrupt mapping based on its presence. If no interrupt line is
specified, keep the FIFO in bypass mode as currently implemented.
- Set up the interrupt handler. Add register access to detect and
evaluate interrupts. Implement functions to clear status registers and
reset the FIFO.
- Implement FIFO watermark configuration and handling. Allow the
watermark level to be set, evaluate the corresponding interrupt, read
the FIFO contents, and push the data to the IIO channel.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-4-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the control of measurement and standby modes for the sensor.
Instead of directly writing to the register, encapsulate this operation
in a dedicated function that handles enabling and disabling measurement.
This approach will reduce code duplication wherever sensor configuration
changes are required. In subsequent patches, measurement mode will be
set to standby as part of this process.
Additionally, simplify the control mask to include only the measurement
bit. The sleep bit governs a different behavior—putting the sensor into
sleep mode, not just standby for configuration—and is currently unused.
Therefore, there's no need to include both the sleep and measurement
bits in the same mask.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Salah Triki
Jonathan Cameron
Claudiu Beznea
David Lechner
Matti Vaittinen
Jean-Baptiste Maneyrol
Bartosz Golaszewski
Linus Torvalds
Nathan Chancellor
Waqar Hameed
Krzysztof Kozlowski
Marcelo Schmitt
Ana-Maria Cusco
Lothar Rubusch