Move the hwcg tables into the hw catalog.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/599727/
Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer
dereference on:
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
as gpu->pdev is only assigned in:
a6xx_gpu_init()
|_ adreno_gpu_init
|_ msm_gpu_init()
Instead of relying on handwavy null checks down the cleanup chain,
explicitly de-allocate the LLC data and free a6xx_gpu instead.
Fixes: 76efc2453d ("drm/msm/gpu: Fix crash during system suspend after unbind")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/588919/
Signed-off-by: Rob Clark <robdclark@chromium.org>
a7xx_submit() should use the a7xx variant of the RBBM_PERFCTR_CP register
for retrieving the CP cycles value before and after the submitted command
stream execution.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Patchwork: https://patchwork.freedesktop.org/patch/588445/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In addition to the CP_PERFCTR_CP_SEL register range, allow writes to the
CP_BV_PERFCTR_CP_SEL registers in the 0x8e0-0x8e6 range for profiling
purposes of tools like fdperf and perfetto.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/580548/
[fixup a730_protect size]
Signed-off-by: Rob Clark <robdclark@chromium.org>
The default highest_bank_bit of 15 didn't seem to cause issues so far
but downstream defines it to be 14. But similar to [0] leaving it on 14
(or 15 for that matter) causes some corruption issues with some
resolutions with DisplayPort, like 1920x1200.
So set it to 13 for now so that there's no screen corruption.
[0] commit 6a0dbcd20e ("drm/msm/a6xx: set highest_bank_bit to 13 for a610")
Fixes: b7616b5c69 ("drm/msm/adreno: Add A619 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Patchwork: https://patchwork.freedesktop.org/patch/585215/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The A702 is a weird mix of 600 and 700 series.. Perhaps even a
testing ground for some A7xx features with good ol' A6xx silicon.
It's basically A610 that's been beefed up with some new registers
and hw features (like APRIV!), that was then cut back in size,
memory bus and some other ways.
Add support for it, tested with QCM2290 / RB1.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579752/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for the A750 GPU found on the SM8650 platform
Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.
The A750 GPU info are added under the adreno_is_a750() macro and
the ADRENO_7XX_GEN3 family id.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/578693/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Historically the Adreno driver has not been updating memory
configuration registers on a618 (SC7180 platform) implying that the
default configuration is fine. After the rework performed in the commit
8814455a0e ("drm/msm: Refactor UBWC config setting") the function
a6xx_calc_ubwc_config() still contained this shortcut and did not
calculate UBWC configuration. However the function which now actually
updates hardware registers, a6xx_set_ubwc_config(), doesn't contain such
check.
Rather than adding the check to a6xx_set_ubwc_config(), fill in the
UBWC config for a618 (based on readings from SC7180).
Reported-by: Leonard Lausen <leonard@lausen.nl>
Link: https://gitlab.freedesktop.org/drm/msm/-/issues/49
Fixes: 8814455a0e ("drm/msm: Refactor UBWC config setting")
Cc: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/579113/
Signed-off-by: Rob Clark <robdclark@chromium.org>
During the testing of Gnome on Qualcomm Robotics platform screen
corruption has been observed. Lowering GPU's highest_bank_bit from 14 to
13 seems to fix the screen corruption.
Note, the MDSS and DPU drivers use HBB=1 (which maps to the
highest_bank_bit = 14). So this change merely works around the UBWC
swizzling issue on this platform until the real cause is found.
Fixes: e7fc9398e6 ("drm/msm/a6xx: Add A610 support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/573838/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Split up calculating configuration parameters and programming them, so
that we can expose them to userspace.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/571180/
Signed-off-by: Rob Clark <robdclark@chromium.org>
KGSL doesn't support a690 so all reg values were the same as
on a660. Now we know the values and they are different from the
windows driver.
This fixes hangs on D3D12 games and some CTS tests.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568931/
Downstream always set BIT(7)
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568930/
When opp-supported-hw is present under an OPP node, but no form of
opp_set_supported_hw() has been called, that OPP is ignored by the API
and marked as unsupported.
Before Commit c928a05e44 ("drm/msm/adreno: Move speedbin mapping to
device table"), an unknown speedbin would result in marking all OPPs
as available, but it's better to avoid potentially overclocking the
silicon - the GMU will simply refuse to power up the chip.
Currently, the Adreno speedbin code does just that (AND returns an
invalid error, (int)UINT_MAX). Fix that by defaulting to speedbin 0
(which is conveniently always bound to fuseval == 0).
Fixes: c928a05e44 ("drm/msm/adreno: Move speedbin mapping to device table")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559604/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some GPUs - particularly A7xx ones - are really really stubborn and
sometimes take a longer-than-expected time to finish unhalting GBIF.
Note that this is not caused by the request a few lines above.
Poll for the unhalt ack to make sure we're not trying to write bits to
an essentially dead GPU that can't receive data on its end of the bus.
Failing to do this will result in inexplicable GMU timeouts or worse.
This is a rather ugly hack which introduces a whole lot of latency.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559292/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A740 builds upon the A730 IP, shuffling some values and registers
around. More differences will appear when things like BCL are
implemented.
adreno_is_a740_family is added in preparation for more A7xx GPUs,
the logic checks will be valid resulting in smaller diffs.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559291/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for Adreno 730, also known as GEN7_0_x, found on SM8450.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559290/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A7xx GPUs are - from kernel's POV anyway - basically another generation
of A6xx. They build upon the A650/A660_family advancements, skipping some
writes (presumably more values are preset correctly on reset), adding
some new ones and changing others.
One notable difference is the introduction of a second shadow, called BV.
To handle this with the current code, allocate it right after the current
RPTR shadow.
BV handling and .submit are mostly based on Jonathan Marek's work.
All A7xx GPUs are assumed to have a GMU.
A702 is not an A7xx-class GPU, it's a weird forked A610.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/559285/
Signed-off-by: Rob Clark <robdclark@chromium.org>
If the GMU can't guarantee the required resources are up, trying to
bring up the GPU is a lost cause. Return early if setting GPU OOB
fails.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/551830/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move these wrappers in preparation for use in a6xx_gmu.c
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/551824/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a helper that does exactly what it says on the can, it'll be
required for A7xx.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # sm8450
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/551828/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some specific SKUs leave certain protection range registers empty.
Allow for that behavior.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543334/
Signed-off-by: Rob Clark <robdclark@chromium.org>
We have the necessary information, so explain which bit does what.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543332/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Let's just stash it in adreno_platform_config rather than looking it up
in N different places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549777/
This simplifies the code.
v2: Use a table of structs instead of flat uint32_t[]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549769/
Rather than just open coding a list of gpu-id matches.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549764/
This just duplicates what is in adreno_info, and can cause confusion if
used before it is set.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549761/
Even in the ocmem case, the allocated ocmem buffer size should match the
requested size.
v2: Move stray hunk to previous patch, make OCMEM size mismatch an error
condition.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549759/
A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542780/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542777/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542770/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Adreno 619 expects some tunables to be set differently. Make up for it.
Fixes: b7616b5c69 ("drm/msm/adreno: Add A619 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542782/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.
This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.
Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542779/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542775/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.
Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).
This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542766/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since the introduction of A6xx support, we've been enabling the CX GMU
power counter 0 in a bit of a weird spot. Move it to hw_init so that
GMU wrapper GPUs can reuse the same code paths. As a bonus, this order
makes it easier to compare mainline and downstream register access traces.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542765/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).
Port setting min_access_length, ubwc_mode and hbb_hi from downstream.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542764/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0.
This is typically done automatically on successful GX collapse, but in
case that fails, we should take care of it.
Also, add a memory barrier to ensure it's gone through before jumping
to further initialization.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542760/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce a6xx_gpu_sw_reset() in preparation for adding GMU wrapper
GPUs and reuse it in a6xx_gmu_force_off().
This helper, contrary to the original usage in GMU code paths, adds
a readback+delay sequence to ensure that the reset is never deasserted
too quickly due to e.g. OoO execution going crazy.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542758/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unify the indentation and explain the cryptic 0xF value.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542756/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This function is responsible for telling the GPU to halt transactions
on all of its relevant buses, drain them and leave them in a predictable
state, so that the GPU can be e.g. reset cleanly.
Move the function to a6xx_gpu.c, remove the static keyword and add a
prototype in a6xx_gpu.h to accomodate for the move.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542762/
Signed-off-by: Rob Clark <robdclark@chromium.org>
As pointed out by Akhil during the review process of GMU wrapper
introduction [1], it makes sense to move this write into the function
that's responsible for forcibly shutting the GMU off.
It is also very convenient to move this to GMU-specific code, so that
it does not have to be guarded by an if-condition to avoid calling it
on GMU wrapper targets.
Move the write to the aforementioned a6xx_gmu_force_off() to achieve
that. No effective functional change.
[1] https://lore.kernel.org/linux-arm-msm/20230501194022.GA18382@akhilpo-linux.qualcomm.com/
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542752/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Allow access to CP_PERFCTR_CP_SEL[n] and RB_PERFCTR_RB_SEL which are
used by fdperf and pps-provider (perfetto).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce support for the Adreno A690, found in Qualcomm SC8280XP.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/540335/
Signed-off-by: Rob Clark <robdclark@chromium.org>
If the Adreno SMMU is dma-coherent, allocation will fail unless we
disable IO_PGTABLE_QUIRK_ARM_OUTER_WBWA. Skip setting this quirk for the
coherent SMMUs (like we have on sm8350 platform).
Fixes: 54af0ceb75 ("arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes")
Reported-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8450 HDK
Patchwork: https://patchwork.freedesktop.org/patch/531562/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The next generated header update will drop the _LO/_HI suffix, now that
the userspace tooling properly understands 64b vs 32b regs (and the _LO/
_HI workarounds are getting cleaned up). So convert to using the 64b
reg helpers in prep.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527923/
Link: https://lore.kernel.org/r/20230320185416.938842-1-robdclark@gmail.com
As per the recommended recovery sequence of adreno gpu, cx gdsc should
collapse at hardware before it is turned back ON. This helps to clear
out the stale states in hardware before it is reinitialized. Use the
genpd notifier along with the newly introduced
dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed
before we turn it back ON.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516472/
Link: https://lore.kernel.org/r/20230102161757.v5.5.I9e10545c6a448d5eb1b734839b871d1b3146dac3@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove the unused 'reset' interface which was supposed to help to ensure
that cx gdsc has collapsed during gpu recovery. This is was not enabled
so far due to missing gpucc driver support. Similar functionality using
genpd framework will be implemented in the upcoming patch.
This effectively reverts commit 1f6cca4049
("drm/msm/a6xx: Ensure CX collapse during gpu recovery").
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/516470/
Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
If, for whatever reason, we're trying process adreno_runtime_resume()
at the same time that a6xx_destroy() is running then things can go
boom. Specifically adreno_runtime_resume() will eventually call
a6xx_pm_resume() and that may try to resume the gmu.
Let's grab the GMU lock as we're destroying the GMU. That will solve
the race because a6xx_pm_resume() grabs the same lock. That makes the
access of `gmu->initialized` in a6xx_gmu_resume() safe.
We'll also return an error code in a6xx_gmu_resume() if we see that
`gmu->initialized` was false. If this happens we'll bail out of the
rest of a6xx_pm_resume(), which is good because the rest of that
function is also not good to do if we're racing with a6xx_destroy().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/521232/
Link: https://lore.kernel.org/r/20230202104822.1.I0e49003bf4dd1dead9be4a29dbee41f3b1236e48@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Merge display-related changes targeting Qualcomm DRM MSM driver.
Notable changes:
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
MDP5:
- Schema conversion to YAML
Misc fixes as usual
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.
Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.
v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
support progress detection (hdanton); removed unused a5xx
progress (without knowing how to adjust for data buffered
in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
duration when progress detection is applied
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
If we get an error (other than -ENOENT) we need to propagate that up the
stack. Otherwise if the nvmem driver hasn't probed yet, we'll end up
end up claiming that we support all the OPPs which is not likely to be
true (and on some generations impossible to be true, ie. if there are
conflicting OPPs).
v2: Update commit msg, gc unused label, etc
v3: Add previously missing \n's
Fixes: fe7952c629 ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511690/
Link: https://lore.kernel.org/r/20221115154637.1613968-1-robdclark@gmail.com
The function a6xx_create_address_space() is mostly a copy of
adreno_iommu_create_address_space() with added quirk setting. Rework
these two functions to be a thin wrappers around a common helper.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509614/
Link: https://lore.kernel.org/r/20221102175449.452283-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
After the msm_iommu instance is created, the IOMMU domain is completely
handled inside the msm_iommu code. Move the iommu_domain_alloc() call
into the msm_iommu_new() to simplify callers code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509615/
Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Because there could be transient votes from other drivers/tz/hyp which
may keep the cx gdsc enabled, we should poll until cx gdsc collapses.
We can use the reset framework to poll for cx gdsc collapse from gpucc
clk driver.
This feature requires support from the platform's gpucc driver.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Patchwork: https://patchwork.freedesktop.org/patch/498397/
Link: https://lore.kernel.org/r/20220819015030.v5.5.I176567525af2b9439a7e485d0ca130528666a55c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are some hardware logic under CX domain. For a successful
recovery, we should ensure cx headswitch collapses to ensure all the
stale states are cleard out. This is especially true to for a6xx family
where we can GMU co-processor.
Currently, cx doesn't collapse due to a devlink between gpu and its
smmu. So the *struct gpu device* needs to be runtime suspended to ensure
that the iommu driver removes its vote on cx gdsc.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/498398/
Link: https://lore.kernel.org/r/20220819015030.v5.4.I4ac27a0b34ea796ce0f938bb509e257516bc6f57@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
The restriction to 4G was strictly to work around 64b math bug in some
versions of SQE firmware. This appears to be fixed in a650+ SQE fw, so
allow a larger address space size on these devices.
Also, add a modparam override for debugging and igt.
v2: Send the right version of the patch (ie. the one that actually
compiles)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/487601/
Link: https://lore.kernel.org/r/20220529180428.2577832-1-robdclark@gmail.com
There are various SKUs of A619, ranging from 565 MHz to 850 MHz, depending
on the bin. Add support for distinguishing them, so that proper frequency
ranges can be applied, depending on the HW.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487590/
Link: https://lore.kernel.org/r/20220528160353.157870-3-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
From testing on sc7180-trogdor devices, reading the GMU registers
needs the GMU clocks to be enabled. Those clocks get turned on in
a6xx_gmu_resume(). Confusingly enough, that function is called as a
result of the runtime_pm of the GPU "struct device", not the GMU
"struct device". Unfortunately the current a6xx_gpu_busy() grabs a
reference to the GMU's "struct device".
The fact that we were grabbing the wrong reference was easily seen to
cause crashes that happen if we change the GPU's pm_runtime usage to
not use autosuspend. It's also believed to cause some long tail GPU
crashes even with autosuspend.
We could look at changing it so that we do pm_runtime_get_if_in_use()
on the GPU's "struct device", but then we run into a different
problem. pm_runtime_get_if_in_use() will return 0 for the GPU's
"struct device" the whole time when we're in the "autosuspend
delay". That is, when we drop the last reference to the GPU but we're
waiting a period before actually suspending then we'll think the GPU
is off. One reason that's bad is that if the GPU didn't actually turn
off then the cycle counter doesn't lose state and that throws off all
of our calculations.
Let's change the code to keep track of the suspend state of
devfreq. msm_devfreq_suspend() is always called before we actually
suspend the GPU and msm_devfreq_resume() after we resume it. This
means we can use the suspended state to know if we're powered or not.
NOTE: one might wonder when exactly our status function is called when
devfreq is supposed to be disabled. The stack crawl I captured was:
msm_devfreq_get_dev_status
devfreq_simple_ondemand_func
devfreq_update_target
qos_notifier_call
qos_max_notifier_call
blocking_notifier_call_chain
pm_qos_update_target
freq_qos_apply
apply_constraint
__dev_pm_qos_update_request
dev_pm_qos_update_request
msm_devfreq_idle_work
Fixes: eadf79286a ("drm/msm: Check for powered down HW in the devfreq callbacks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/489124/
Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJihZ6hAAoJEJMTUIYYBUIphx8IAJZ+8FJ+qjCne0GaVFGczjFr
cz1PVE7CAXWlgA+1V/xSw7Awt0oPhrB400SRh/2bea8awHkKZxtcnBIA1apEoDjo
+qyhHMpwcItCHQM5xOKKGZb0KU+MCK9/6PH5VjD8k1gX52OoxQ4e0uUng7ljVgCe
F/LBBpW6oY6ZAiZxaxieXSD36bNkwhYXdYGWdJFQPQF+N4gYPmSWOmijaRnkJtnv
o4VS5HnTN3FMgKu+h2Rr7r4A5s7WygVJM7K+sbJZI/F+OCFv3lftkU2JOXGtS2oc
5sInJB972aafkD3lOzTPyARiHrtvLpsSGPXok24b3suRN0pHRYtvAOdrI0m/sUg=
=y6Lb
-----END PGP SIGNATURE-----
Merge tag 'msm-next-5.19-fixes' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
a6xx_gmu_init() passes the node to of_find_device_by_node()
and of_dma_configure(), of_find_device_by_node() will takes its
reference, of_dma_configure() doesn't need the node after usage.
Add missing of_node_put() to avoid refcount leak.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220512121955.56937-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- Devfreq clamp_to_idle fix
- DPU: DSC (Display Stream Compression) support
- DPU: inline rotation support on SC7280
- DPU: update DP timings to follow vendor recommendations
- DP, DPU: add support for wide bus (on newer chipsets)
- DP: eDP support
- Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master
component
- MDSS: optionally reset the IP block at the bootup to drop
bootloader state
- Properly register and unregister internal bridges in the DRM framework
- Complete DPU IRQ cleanup
- DP: conversion to use drm_bridge and drm_bridge_connector
- eDP: drop old eDP parts again
- DPU: writeback support
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
Move tracking and busy time calculation to msm_devfreq_get_dev_status.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220416003314.59211-2-olvaffe@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The ring seqno counter duplicates the fence-context last_fence counter.
They end up getting incremented in lock-step, on the same scheduler
thread, but the split just makes things less obvious.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220411215849.297838-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The fourth param is size, rather than range_end.
Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc)
does not require counters to maintain state across context switches. So
clear them if systemwide profiling is not active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
msm_ioremap() functions take additional argument dbgname which is now
unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add a debugfs interface to ignore hw error irqs, in order to force
fallback to sw hangcheck mechanism. Because the hw error detection is
pretty good on newer gens, we need this for igt tests to test the sw
hang detection.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
cur_ctx_seqno already does the same thing, but handles the edge cases
where a refcnt'd context can live after lastclose. So let's not have
two ways to do the same thing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Avoid a possible uninitialized use of gpu_scid variable to fix the
below smatch warning:
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:1480 a6xx_llc_activate()
error: uninitialized symbol 'gpu_scid'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118154903.3.Ie4ac321feb10168af569d9c2b4cf6828bed8122c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Until we better understand the stability issues caused by frequent
frequency changes, lets limit them to a618.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid. Instead assign a sequence number
to each context on creation, and use this for the check.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
I've seen some crashes in our crash reporting that *look* like multiple
threads stomping on each other while communicating with GMU. So wrap
all those paths in a lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
This check is really about which SQE firmware, rather than which GPU.
Rework to match minimum version based on firmware name, so it doesn't
need to be updated when adding additional GPUs using the same fw.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210807163019.379003-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark
Konrad Dybcio
Zan Dobersek
Luca Weiss
Connor Abbott
Neil Armstrong
Dmitry Baryshkov
Danylo Piliaiev
Bjorn Andersson
Akhil P Oommen
Douglas Anderson
Dave Airlie
Geert Uytterhoeven
Konrad Dybcio
Miaoqian Lin
Chia-I Wu
Akhil P Oommen