gfx12 derivatives will have substantially different trap handler
implementations from gfx10/gfx11. Add a separate source file for
gfx12+ and remove unneeded conditional code.
No functional change.
v2: Revert copyright date to 2018, minor comment fixes
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In commit fda812ebe3 ("drm/amdkfd: gfx12 context save/restore trap handler fixes")
the following fix was introduced but incorrectly restricted to gfx12.
The same issue and a corresponding fix apply to gfx10 and gfx11.
Do not overwrite TRAPSTS.{SAVECTX,HOST_TRAP} when restoring this
register. Both of these fields can assert while the wavefront is
running the trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A wavefront may deallocate its VGPRs at the end of a program while
waiting for memory transactions to complete. If it subsequently
receives a context save exception it will be unable to save,
since this requires VGPRs. In this case the trap handler should
terminate the wavefront.
Fixes intermittent VM faults under context switching load.
V2: Use S_ENDPGM instead of S_ENDPGM_SAVED for performance counters
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix LDS size interpretation: 512 bytes (>= gfx12) vs 256 (< gfx12).
Ensure STATE_PRIV.BARRIER_COMPLETE cannot change after reading or
before writing. Other waves in the threadgroup may cause this field
to assert if they complete the barrier.
Do not overwrite EXCP_FLAG_PRIV.{SAVE_CONTEXT,HOST_TRAP} when
restoring this register. Both of these fields can assert while the
wavefront is running the trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer assemblers reject S_WAITCNT. All instances of S_WAITCNT can be
replaced by S_WAITCNT 0 (< gfx12) or S_WAIT_IDLE (>= gfx12) since
there is no concurrency of different memory instruction classes.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When trap_ctrl.trap_after_inst is set, it is possible for a wave to
enter the trap handler, after single-stepping an instruction and a
save_context is raised, with only save_context set in excp_flag_priv.
Because excp_flag_priv.trap_after_inst is not reliably set, we need to
use the missed single-step workaround for gfx12 as well.
Also add wave_start and wave_end as exceptions that should be handled
by the 2nd level trap handler.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to save and restore the work group barrier state in gfx12
CWSR trap handler.
There is no support to directly restore the signal count of a barrier
state, so instead this patch repeatedly calls s_barrier_signal to
increment the signal count to the desired value.
In this patch, I have implemented the logic to restore the barrier at
the end of the block restoring the HWREGs. This process needs to be
done by exactly 1 wave per work group. To achieve this, the initial
value of s_restore_spi_init_hi (containing a FIRST_WAVE bit) needs to be
saved up until that point. An alternative could be restore the barrier
earlier in the process (around when LDS is restored, as the same wave
does both). Doing this would break the pattern that the restore
procedure follows the CWSR area layout.
Before restoring the barrier, this patch checks if the barrier was whose
state was saved has the "valid" bit set, even if I don't think this
barrier can be in an invalid state during context save. I expect this
test to always be true.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- HWREG changes since gfx11
- Save/restore barrier state
- get_wave_size is now reserved by assembler
v2: rebase (Alex)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change. Preparation for gfx12 support.
v2: drop unrelated change (Alex)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similarly to gfx9, gfx10.1 drops vector stores when an xnack error is
raised. To work around this issue, use scalar stores instead of vector
stores when trapsts.xnack_error == 1.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call the 2nd level trap handler if the cwsr handler is entered with any
one of wave_start, wave_end, or trap_after_inst exceptions.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This instruction has no functional difference to S_ENDPGM
but allows performance counters to track save events correctly.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The trap handler could be entered with pending VALU exceptions, so
clear the exception state before issuing vector instructions.
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMEM instructions can reach addresses above 47 bits but require
bit 47 to be sign-extended through bits [63:48].
This allows the TMA to be relocated in a following patch.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With corresponding FW change fixes issue where triggering CWSR on a
workgroup with waves in s_barrier wouldn't lead to a back-off and
therefore cause a hang.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Enables support for software trap for MES >= 4.
Adapted from implementation from Jay Cornwall.
v2: Add IP version check in conditions.
v3: Remove debugger code changes.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on gfx10 with following changes:
- GPR_ALLOC.VGPR_SIZE field moved (and size corrected in gfx10)
- s_sendmsg_rtn_b64 replaces some s_sendmsg/s_getreg
- Buffer instructions no longer have direct-to-LDS modifier
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of changes are for debugger feature, and it is
to simplify trap handler support for new asics in the
future.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.
Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0a5baee415.
The change introduced a regression on some chips. Reverting until
a proper solution can be found.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit ea368183ae.
Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10
context save area layouts".
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.
Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Preserve scalar GPRs ttmp[4:11] and ttmp13
- Add single step exception during context save workaround
- Remove incorrect PC adjustment during context save
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The contents of macros are parsed by the assembler before conditions
have been tested. This causes assembly errors when using IP-specific
instructions in the IP-unified trap handler.
Add a preprocessing step to filter IP-specific code.
Also guard a Navi1x-specific instruction (no effect on Sienna_Cichlid).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Replace SQC stores with TCP stores
- Synchronize with MSG_SAVEWAVE via lgkmcnt
- HW_REG_IB_STS is now read-only
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing synchronization with VGPR restore leads to intermittent
VGPR trashing in the user shader.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttmp[4:5] hold information useful to the debugger. Use ttmp[14:15]
instead, aligning implementation with gfx9 trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCC moved out of user SGPR allocation in gfx10. It's now stored
in SGPRs 106-107.
Also fixes incorrect SGPR read offsets.
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These moved from SGPRs in gfx9 to HWREG in gfx10.
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy/paste error, first 4 VGPRs are separated by 64 dwords (256 bytes).
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously submitted code was taken from an incorrect branch and
was non-functional.
Cc: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD (kernel fusion driver) is the kernel driver
for the compute backend for usermode compute
stack.
v2: squash in updates (Alex)
v3: squash in rebase fixes (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall
Laurent Morichetti
Lancelot SIX
David Belanger
Eric Huang
Felix Kuehling
Philip Cox