The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.
Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)
and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)
These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Seth reported that on his side XDP traffic can not survive a round of
down/up against i40e interface. Dmesg output was telling us that we were
not able to disable the very first XDP ring. That was due to the fact
that in i40e_vsi_stop_rings() in a pre-work that is done before calling
i40e_vsi_wait_queues_disabled(), XDP Tx queues were not taken into the
account.
To fix this, let us distinguish between Rx and Tx queue boundaries and
take into the account XDP queues for Tx side.
Reported-by: Seth Forshee <sforshee@kernel.org>
Closes: https://lore.kernel.org/netdev/ZbkE7Ep1N1Ou17sA@do-x1extreme/
Fixes: 65662a8dcd ("i40e: Fix logic of disabling queues")
Tested-by: Seth Forshee <sforshee@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, when interface is being brought down and
i40e_vsi_stop_rings() is called, i40e_pf_rxq_wait() is called two times,
which is wrong. To showcase this scenario, simplified call stack looks
as follows:
i40e_vsi_stop_rings()
i40e_control wait rx_q()
i40e_control_rx_q()
i40e_pf_rxq_wait()
i40e_vsi_wait_queues_disabled()
i40e_pf_rxq_wait() // redundant call
To fix this, let us s/i40e_control_wait_rx_q/i40e_control_rx_q within
i40e_vsi_stop_rings().
Fixes: 65662a8dcd ("i40e: Fix logic of disabling queues")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs
up to 'pf->hw.func_caps.num_vsis' but this is incorrect because
the real number of VSIs can be up to 'pf->num_alloc_vsi' that
can be higher. Fix this loop.
Fixes: 69129dc39f ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us
make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC
is being set via xsk_pool_get_rx_frame_size() and this needs to be
propagated up to xdp_rxq_info.
Fixes: 1c9ba9c146 ("i40e: xsk: add RX multi-buffer support")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
i40e support XDP multi-buffer so it is supposed to use
__xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the
frag_size. It can not be simply converted at existing callsite because
rx_buf_len could be un-initialized, so let us register xdp_rxq_info
within i40e_configure_rx_ring(), which happen to be called with already
initialized rx_buf_len value.
Commit 5180ff1364 ("i40e: use int for i40e_status") converted 'err' to
int, so two variables to deal with return codes are not needed within
i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status
from xdp_rxq_info registration.
Fixes: e213ced19b ("i40e: add support for XDP multi-buffer Rx")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-11-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.
Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.
Fixes: 19b7960b2d ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 3116f59c12 ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.
When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.
Fix again for both netdev->uc and netdev->mc.
BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379
CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6b/0x290
kasan_report+0x14a/0x2b0
i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
i40e_sync_vsi_filters+0x1676/0x39c0 [i40e]
i40e_service_task+0x1397/0x2bb0 [i40e]
process_one_work+0x56a/0x11f0
worker_thread+0x8f/0xf40
kthread+0x2a0/0x390
ret_from_fork+0x1f/0x40
Allocated by task 21948:
kasan_kmalloc+0xa6/0xd0
kmem_cache_alloc_trace+0xdb/0x1c0
i40e_add_filter+0x11e/0x520 [i40e]
i40e_addr_sync+0x37/0x60 [i40e]
__hw_addr_sync_dev+0x1f5/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_add_excl+0x137/0x190
i40e_ndo_fdb_add+0x161/0x260 [i40e]
rtnl_fdb_add+0x567/0x950
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Freed by task 21948:
__kasan_slab_free+0x137/0x190
kfree+0x8b/0x1b0
__i40e_del_filter+0x116/0x1e0 [i40e]
i40e_del_mac_filter+0x16c/0x300 [i40e]
i40e_addr_unsync+0x134/0x1b0 [i40e]
__hw_addr_sync_dev+0xff/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_del+0x77/0x90
rtnl_fdb_del+0x6a5/0x860
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 3116f59c12 ("i40e: fix use-after-free in i40e_sync_filters_subtask()")
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Di Zhu <zhudi2@huawei.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the i40e driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
While making one of the conversions, an if() check was inverted to
return early and avoid un-necessary indentation of the remainder of the
function. In some other cases a stack variable was moved inside the
block where it was used while doing cleanups/review.
A couple places were changed to use le16_get_bits() instead of FIELD_GET
with a le16_to_cpu combination.
@get@
constant shift,mask;
metavariable type T;
expression a;
@@
-(((T)(a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor i40e driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
Refactor one function with multiple if's to return quickly to make lines
fit in 80 columns.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 3a2c6ced90 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:
<code>
...
/* if FDIR VSI was set up, start it now */
for (i = 0; i < pf->num_alloc_vsi; i++) {
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
i40e_vsi_open(pf->vsi[i]);
break;
}
}
...
</code>
So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.
Fix the message by using 'pf->hw.port' for the port number.
Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fields 'head', 'tail', 'len', 'bah' and 'bal' in i40e_adminq_ring
are used to store register offsets. These offsets are initialized
and remains constant so there is no need to store them in the
i40e_adminq_ring structure.
Remove these fields from i40e_adminq_ring and use register offset
constants instead. Remove i40e_adminq_init_regs() that originally
stores these constants into these fields.
Finally improve i40e_check_asq_alive() that assumes that
non-zero value of hw->aq.asq.len indicates fully initialized
AdminQ send queue. Replace it by check for non-zero value
of field hw->aq.asq.count that is non-zero when the sending
queue is initialized and is zeroed during shutdown of
the queue.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Removed fields:
.fc_autoneg_status
Since commit c56999f948 ("i40e/i40evf: Add set_fc and init of
FC settings") write-only and otherwise unused
.eeprom_version
Write-only and otherwise unused
.atr_sample_rate
Has only one possible value (I40E_DEFAULT_ATR_SAMPLE_RATE). Remove
it and replace its occurrences by I40E_DEFAULT_ATR_SAMPLE_RATE
.adminq_work_limit
Has only one possible value (I40E_AQ_WORK_LIMIT). Remove it and
replace its occurrences by I40E_AQ_WORK_LIMIT
.tx_sluggish_count
Unused, never written
.pf_seid
Used to store VSI downlink seid and it is referenced only once
in the same codepath. There is no need to save it into i40e_pf.
Remove it and use downlink_seid directly in the mentioned log
message.
.instance
Write only. Remove it as well as ugly static local variable
'pfs_found' in i40e_probe.
.int_policy
.switch_kobj
.ptp_pps_work
.ptp_extts1_work
.ptp_pps_start
.pps_delay
.ptp_pin
.override_q_count
All these unused at all
Prior the patch:
pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5
/* size: 5368, cachelines: 84, members: 127 */
/* sum members: 5297, holes: 20, sum holes: 71 */
/* paddings: 6, sum paddings: 19 */
/* last cacheline: 56 bytes */
};
After the patch:
pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5
/* size: 4976, cachelines: 78, members: 112 */
/* sum members: 4905, holes: 17, sum holes: 71 */
/* paddings: 6, sum paddings: 19 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use new helpers to check versions of running FW and provided
AQ API to make the code more readable.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some i40e_hw.caps bits are set in i40e_set_hw_caps(), some of them
in i40e_init_adminq() and the rest of them in i40e_sw_init().
Consolidate the initialization to single proper place i40e_set_hw_caps().
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate
capabilities provided by hardware. Move and merge i40e_pf.hw_features
into i40e_hw.caps as this is more appropriate place for them and
adjust their names to I40E_HW_CAP_... convention.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert flags field in i40e_hw from u64 to bitmap and its usage
to use bit access functions and rename the field to 'caps' as
this field describes capabilities that are set once on init and
read many times later.
Changes:
- Convert "hw_ptr->flags & FLAG" to "test_bit(FLAG, ...)"
- Convert "hw_ptr->flags |= FLAG" to "set_bit(FLAG, ...)"
- Convert "hw_ptr->flags &= ~FLAG" to "clear_bit(FLAG, ...)"
- Rename i40e_hw.flags to i40e_hw.caps
- Rename i40e_set_hw_flags() to i40e_set_hw_caps()
- Adjust caps names so they are prefixed by I40E_HW_CAP_ and existing
_CAPABLE suffixes are stripped
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert flags and hw_features fields from i40e_pf from u32 to
bitmaps and their usage to use bit access functions.
Changes:
- Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)"
- Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)"
- Rename flag field to bitno in i40e_priv_flags and adjust ethtool
callbacks to work with flags bitmap
- Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS'
like in ice driver
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag I40E_FLAG_RX_CSUM_ENABLED and I40E_HW_FLAG_DROP_MODE are
set and never read. Remove them.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check the value of 'ret' after calling 'i40e_vsi_config_rss'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function i40e_read_pba_string() is currently unused but will be used
by subsequent patch to provide board ID via devlink device info.
The function reads PBA block from NVM so it cannot be called during
adapter reset and as we would like to provide PBA ID via devlink
info it is better to read the PBA ID during i40e_probe() and cache
it in i40e_hw structure to avoid a waiting for potential adapter
reset in devlink info callback.
So...
- Remove pba_num and pba_num_size arguments from the function,
allocate resource managed buffer to store PBA ID string and
save resulting pointer to i40e_hw->pba_id field
- Make the function void as the PBA ID can be missing and in this
case (or in case of NVM reading failure) the i40e_hw->pba_id
will be NULL
- Rename the function to i40e_get_pba_string() to align with other
functions like i40e_get_oem_version() i40e_get_port_mac_addr()...
- Call this function on init during i40e_probe()
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function formats NVM version string according adapter's
EETrackID value. If this value OEM specific (0xffffffff) then
the reported version is with format:
"<gen>.<snap>.<release>"
and in other case
"<nvm_maj>.<nvm_min> <eetrackid> <cvid_maj>.<cvid_bld>.<cvid_min>"
These versions are reported in the subsequent patch in this series
that implements devlink .info_get but separately.
So split the function into separate ones, refactor it to use them
and remove ugly static string buffer.
Additionally convert NVM/OEM version mask macros to use GENMASK and
use FIELD_GET/FIELD_PREP for them in i40e_nvm_version_str() and
i40e_get_oem_version(). This makes code more readable and allows
us to remove related shift macros.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an initial support for devlink interface to i40e driver.
Similarly to ice driver the implementation doe not enable devlink
to manage device-wide configuration and devlink instance is created
for each physical function of PCIe device.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly as for ice driver [1] there are also circular header
dependencies in i40e driver:
i40e.h -> i40e_virtchnl_pf.h -> i40e.h
Another issue is that i40e header files does not contain their own
dependencies on other header files (both private and standard) so their
inclusion in .c file require to add these deps in certain order to
that .c file to make it compilable.
Fix both issues by removal the mentioned circular dependency, by filling
i40e headers with their dependencies so they can be placed anywhere in
a source code. Additionally remove bunch of includes from i40e.h super
header file that are not necessary and include i40e.h only in .c files
that really require it.
[1] 649c87c6ff ("ice: remove circular header dependencies on ice.h")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Enum i40e_memory_type enum is unused in i40e_allocate_dma_mem() thus
can be safely removed. Useless macros in i40e_alloc.h can be removed
as well.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The .back field placed in i40e_hw is used to get pointer to i40e_pf
instance but it is not necessary as the i40e_hw is a part of i40e_pf
and containerof macro can be used to obtain the pointer to i40e_pf.
Remove .back field from i40e_hw structure, introduce i40e_hw_to_pf()
and i40e_hw_to_dev() helpers and use them.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As the comment in struct rtnl_link_stats64, rx_dropped should not
include packets dropped by the device due to buffer exhaustion.
They are counted in rx_missed_errors, procfs folds those two counters
together.
Add rx_missed_errors for buffer exhaustion, rx_missed_errors corresponds
to rx_discards, rx_dropped corresponds to rx_discards_other.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of freeing memory of a single VSI, make sure
the memory for all VSIs is cleared before releasing VSIs.
Add releasing of their resources in a loop with the iteration
number equal to the number of allocated VSIs.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace uses of i40e_status to as equivalent as possible error codes.
Remove enum i40e_status as it is no longer needed
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As 32bits of dissector->used_keys are exhausted,
increase the size to 64bits.
This is base change for ESP/AH flow dissector patch.
Please find patch and discussions at
https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set eop bit in TX desc command only for the last descriptor of the
packet and do not set for all preceding descriptors.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-17-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is inspired from the multi-buffer support in non-zc path for
i40e as well as from the patch to support zc on ice. Each subsequent
frag is added to skb_shared_info of the first frag for possible xdp_prog
use as well to xsk buffer list for accessing the buffers in af_xdp.
For XDP_PASS, new pages are allocated for frags and contents are copied
from memory backed by xsk_buff_pool.
Replace next_to_clean with next_to_process as done in non-zc path and
advance it for every buffer and change the semantics of next_to_clean to
point to the first buffer of a packet. Driver will use next_to_process
in the same way next_to_clean was used previously.
For the non multi-buffer case, next_to_process and next_to_clean will
always be the same since each packet consists of a single buffer.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-14-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check has been moved to core. The ndo_set_mac_address callback
is not being called with new MAC address equal to the old one anymore.
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes: 278e7d0b9d ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch adds multi-buffer support for the i40e_driver.
i40e_clean_rx_irq() is modified to collate all the buffers of a packet
before calling the XDP program. xdp_buff is built for the first frag of
the packet and subsequent frags are added to it. 'next_to_process' is
incremented for all non-EOP frags while 'next_to_clean' stays at the
first descriptor of the packet. XDP program is called only on receiving
EOP frag.
New functions are added for adding frags to xdp_buff and for post
processing of the buffers once the xdp prog has run. For XDP_PASS this
results in a skb with multiple fragments.
i40e_build_skb() builds the skb around xdp buffer that already contains
frags data. So i40e_add_rx_frag() helper function is now removed. Since
fields before 'dataref' in skb_shared_info are cleared during
napi_skb_build(), xdp_update_skb_shared_info() is called to set those.
For i40e_construct_skb(), all the frags data needs to be copied from
xdp_buffer's shared_skb_info to newly constructed skb's shared_skb_info.
This also means 'skb' does not need to be preserved across i40e_napi_poll()
calls and hence is removed from i40e_ring structure.
Previously i40e_alloc_rx_buffers() was called for every 32 cleaned
buffers. For multi-buffers this may not be optimal as there may be more
cleaned buffers in each i40e_clean_rx_irq() call. So this is now called
when at least half of the ring size has been cleaned.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Store xdp_buff on Rx ring struct in preparation for XDP multi-buffer
support. This will allow us to combine fragmented frames across
separate NAPI cycles in the same way as currently skb fragments are
handled. This means that skb pointer on Rx ring will become redundant
and will be removed in a later patch. As a consequence i40e_trace() now
uses xdp instead of skb pointer.
Truesize only needs to be calculated for page sizes bigger than 4k as it
is always half-page for 4k pages. With xdp_buff on ring, frame size can
now be set during xdp_init_buff() and need not be repopulated in each
NAPI call for 4k pages. As a consequence i40e_rx_frame_truesize() is now
used only for bigger pages.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Adding support for XDP multi-buffer entails adding information of all
the fragments of the packet in the xdp_buff. This approach implies that
underlying buffer has to provide tailroom for skb_shared_info.
In the legacy-rx mode, driver can only configure up to 2k sized Rx buffers
and with the current configuration of 2k sized Rx buffers there is no way
to do tailroom reservation for skb_shared_info. Hence size of Rx buffers
is now lowered to 2048 - sizeof(skb_shared_info). Also, driver can only
chain up to 5 Rx buffers and this means max MTU supported for legacy-rx
is now 8614 (5 * rx_buffer_len - ETH header with VLAN).
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce new helper function to calculate max frame size for validating
and setting of vsi frame size. This is used while configuring vsi,
changing the MTU and attaching an XDP program to the vsi.
This is in preparation of the legacy rx and multi-buffer changes to be
introduced in later patches.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 51616018dd ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-09 (i40e)
Jan removes i40e_status from the driver; replacing them with standard
kernel error codes.
Kees Cook replaces 0-length array with flexible array.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net/i40e: Replace 0-length array with flexible array
i40e: use ERR_PTR error print in i40e messages
i40e: use int for i40e_status
i40e: Remove string printing for i40e_status
i40e: Remove unused i40e status codes
====================
Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI
gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd
agIZTkRs6BHF9He8oROypARZxTeMLwM=
=nO1C
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In i40e_status removal patches, i40e_status conversion
to strings was removed in order to easily refactor
the code to use standard errornums. This however made it
more difficult for read error logs.
Use %pe formatter to print error messages in human-readable
format.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To prepare for removal of i40e_status, change the variables
from i40e_status to int. This eases the transition when values
are changed to return standard int error codes over enum i40e_status.
As such changes often also change variable orders, a cleanup
is also applied here to make variables conform to RCT and
some lines are also reformatted where applicable.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the i40e_stat_str() function which prints the string
representation of the i40e_status error code. With upcoming changes
moving away from i40e_status, there will be no need for this function
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.
Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.
Turn 'hw-offload' feature flag on for:
- netronome (nfp)
- netdevsim.
Turn 'native' and 'zerocopy' features flags on for:
- intel (i40e, ice, ixgbe, igc)
- mellanox (mlx5).
- stmmac
- netronome (nfp)
Turn 'native' features flags on for:
- amazon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2, enetc)
- funeth
- intel (igb)
- marvell (mvneta, mvpp2, octeontx2)
- mellanox (mlx4)
- mtk_eth_soc
- qlogic (qede)
- sfc
- socionext (netsec)
- ti (cpsw)
- tap
- tsnep
- veth
- xen
- virtio_net.
Turn 'basic' (tx, pass, aborted and drop) features flags on for:
- netronome (nfp)
- cavium (thunder)
- hyperv.
Turn 'redirect_target' feature flag on for:
- amanzon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2)
- intel (i40e, ice, igb, ixgbe)
- ti (cpsw)
- marvell (mvneta, mvpp2)
- sfc
- socionext (netsec)
- qlogic (qede)
- mellanox (mlx5)
- tap
- veth
- virtio_net
- xen
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c ("mptcp: use proper req destructor for IPv6")
36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for NETIF_F_LOOPBACK. This feature can be set via:
$ ethtool -K eth0 loopback <on|off>
This sets the MAC Tx->Rx loopback.
This feature is used for the xsk selftests, and might have other uses
too.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221209185553.2520088-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.
Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.
Fixes: 613142b0bb ("i40e: Log error for oversized MTU on device")
Fixes: 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.com>
Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During tx rings configuration default XPS queue config is set and
__I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is
cleared and set again with default mapping only during queues build,
it means after first setup or reset with queues rebuild. (i.e.
ethtool -L <interface> combined <number>) After other resets (i.e.
ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default
maps cannot be set again. It results in cleared xps_cpus mapping
until queues are not rebuild or mapping is not set by user.
Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let
the driver set xps_cpus to defaults again after it was cleared.
Fixes: 6f853d4f8e ("i40e: allow XPS with QoS enabled")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e_init_module() won't free the debugfs directory created by
i40e_dbg_init() when pci_register_driver() failed. Add fail path to
call i40e_dbg_exit() to remove the debugfs entries to prevent the bug.
i40e: Intel(R) Ethernet Connection XL710 Network Driver
i40e: Copyright (c) 2013 - 2019 Intel Corporation.
debugfs: Directory 'i40e' with parent '/' already present!
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make it easy to figure out the IRQ number for a particular i40e_q_vector by
storing the assigned IRQ in the structure itself.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During reallocation of RX buffers, new DMA mappings are created for
those buffers.
steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.
Fixes: be1222b585 ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add description for values written into registers QINT_XXXX
and small cosmetic changes for MSI/LEGACY interrupts
configuration in the same way as for MSI-X.
Descriptions confirm the code is written correctly and
make the code clear. Small cosmetic changes for MSI/LEGACY
interrupts make code clear in the same manner as for MSI-X
interrupts.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Intel introduces a new line of 1G ethernet adapters with Device ID 0x0DD2
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix HW rate limiting for ADQ.
Fallback to kernel queue selection for ADQ, as it is network stack
that decides which queue to use for transmit with ADQ configured.
Reset PF after creation of VMDq2 VSIs required for ADQ, as to
reprogram TX queue contexts in i40e_configure_tx_ring.
Without this patch PF would limit TX rate only according to TC0.
Fixes: a9ce82f744 ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw
Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool
Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2
Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5}
Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena
Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet
Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bitwise checks for whether TC MQPRIO is enabled
into one single method for improved readability.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix an issue when driver incorrectly detects state
of recovery process and erroneously reinitializes interrupts,
which results in a kernel error and call trace message.
The issue was caused by a combination of two factors:
1. Assuming the EMP reset issued after completing
firmware recovery means the whole recovery process is complete.
2. Erroneous reinitialization of interrupt vector after detecting
the above mentioned EMP reset.
Fixes (1) by changing how recovery state change is detected
and (2) by adjusting the conditional expression to ensure using proper
interrupt reinitialization method, depending on the situation.
Fixes: 4ff0ee1af0 ("i40e: Introduce recovery mode support")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.
Fix it by reading GL_RXERR1 register for each interface.
Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"
Fixes: 41a9e55c89 ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Calling synchronize_irq() right before free_irq() is quite useless. On one
hand the IRQ can easily fire again before free_irq() is entered, on the
other hand free_irq() itself calls synchronize_irq() internally (in a race
condition free way), before any state associated with the IRQ is freed.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Procedure of configure tc flower filters erroneously allows to create
filters on TC0 where unfiltered packets are also directed by default.
Issue was caused by insufficient checks of hw_tc parameter specifying
the hardware traffic class to pass matching packets to.
Fix checking hw_tc parameter which blocks creation of filters on TC0.
Fixes: 2f4b411a3d ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VFs by default are able to see all tagged traffic regardless of trust
and VLAN filters configured.
Add new private flag vf-vlan-pruning that allows changing of default
VF behavior for tagged traffic. When the flag is turned on
untrusted VF will only be able to receive untagged traffic
or traffic with VLAN tags it has created interfaces for
The flag is off by default and can only be changed if
there are no VFs spawned on the PF. This flag will only be effective
when no PVID is set on VF and VF is not trusted.
Add new function that computes the correct VLAN ID for VF VLAN filters
based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID.
Testing Hints:
Test 1: vf-vlan-pruning == off
==============================
1. Set the private flag
> ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting)
2. Use scapy to send any VLAN tagged traffic and make sure the VF
receives all VLAN tagged traffic that matches its destination MAC
filters (unicast, multicast, and broadcast).
Test 2: vf-vlan-pruning == on
==============================
1. Set the private flag
> ethtool --set-priv-flag eth0 vf-vlan-pruning on
2. Use scapy to send any VLAN tagged traffic and make sure the VF does
not receive any VLAN tagged traffic that matches its destination MAC
filters (unicast, multicast, and broadcast).
3. Add a VLAN filter on the VF netdev
> ip link add link eth0v0 name vlan10 type vlan id 10
4. Bring the VLAN netdev up
> ip link set vlan10 up
4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN
10), and untagged traffic. Make sure the VF only receives VLAN 10
and untagged traffic when the link partner is sending.
Test 3: vf-vlan-pruning == off && VF is in a port VLAN
==============================
1. Set the private flag
> ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting)
2. Create a VF
> echo 1 > sriov_numvfs
3. Put the VF in a port VLAN
> ip link set eth0 vf 0 vlan 10
4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN
10) and make sure the VF only receives untagged traffic when the link
partner is sending VLAN 10 tagged traffic as the VLAN tag is expected
to be stripped by HW for port VLANs and not visible to the VF.
Test 4: Change vf-vlan-pruning while VFs are created
==============================
echo 0 > sriov_numvfs
ethtool --set-priv-flag eth0 vf-vlan-pruning off
echo 1 > sriov_numvfs
ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure)
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The bug is here:
ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err);
The list iterator 'ch' will point to a bogus position containing
HEAD if the list is empty or no element is found. This case must
be checked before any use of the iterator, otherwise it will
lead to a invalid memory access.
To fix this bug, use a new variable 'iter' as the list iterator,
while use the origin variable 'ch' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 1d8d80b4e4 ("i40e: Add macvlan support on i40e")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Ethernet Connection X722 for 10GbE SFP+ cards.
Make possible for the driver to bind to the card.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Track TX queue stop events and export the new stat with ethtool.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera
Maciej Fijalkowski
Jakub Kicinski
Andrii Staikov
Ke Xiao
Jesse Brandeburg
Su Hui
Yajun Deng
Jan Sokolowski
Ratheesh Kannoth
Tirthendu Sarkar
Piotr Gardocki
Aleksandr Loktionov
David S. Miller
Lorenzo Bianconi
Jason Xing
Natalia Petrova
Marek Majtyka
Bjorn Helgaas
Steven Rostedt (Google)
Paolo Abeni
Bartosz Staszewski
Michal Jaron
Shang XiaoJing
Joe Damato
Thomas Gleixner
Jaroslaw Gawin
Stanislaw Grzeszczak
Przemyslaw Patynowski
Wolfram Sang
Alan Brady
Michal Maloszewski
Dawid Lukwinski
Lukasz Cieplicki
Jilin Yuan
Minghao Chi
Grzegorz Szczurek
Mateusz Palczewski
Xiaomeng Tong