Rather than checking in the callbacks, check if the reset
type is supported in the caller.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the dirty bit when the memory resource is not cleared
during BO release.
v2(Christian):
- Drop the cleared flag set to false.
- Improve the amdgpu_vram_mgr_set_clear_state() function.
v3:
- Add back the resource clear flag set function call after
being cleared during eviction (Christian).
- Modified the patch subject name.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319)
Cc: stable@vger.kernel.org
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3e)
Cc: stable@vger.kernel.org
The term "HQD" is CP-specific and doesn't
accurately describe the queue resources for other IP blocks like SDMA,
VCN, or VPE. This change:
1. Renames `num_hqds` to `num_slots` in amdgpu_kms.c to better reflect
the generic nature of the resource counting
2. Updates the UAPI struct member from `userq_num_hqds` to `userq_num_slots`
3. Maintains the same functionality while using more appropriate terminology
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change exposes the number of available user queue instances
for each hardware IP type (GFX, COMPUTE, SDMA) through the
drm_amdgpu_info_hw_ip interface.
Key changes:
1. Added userq_num_instance field to drm_amdgpu_info_hw_ip structure
2. Implemented counting of available HQD slots using:
- mes.gfx_hqd_mask for GFX queues
- mes.compute_hqd_mask for COMPUTE queues
- mes.sdma_hqd_mask for SDMA queues
3. Only counts available instances when user queues are enabled
(!disable_uq)
v2: using the adev->mes.gfx_hqd_mask[]/compute_hqd_mask[]/sdma_hqd_mask[] masks
to determine the number of queue slots available for each engine type (Alex)
v3: rename userq_num_instance to userq_num_hqds (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accessing amdgpu internal data structures "struct amdgpu_device"
and "struct amdgpu_bo" in ISP V4L2 driver to alloc/free GART
buffers is not recommended.
Add new amdgpu_isp helper functions that takes opaque params
from ISP V4L2 driver and calls the amdgpu internal functions
amdgpu_bo_create_isp_user() and amdgpu_bo_create_kernel() to
alloc/free GART buffers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create amd_isp_capture MFD device with swnode initialized to
isp specific software_node part of fwnode graph in amd_isp4
x86/platform driver. The isp driver use this swnode handle
to retrieve the critical properties (data-lanes, mipi phyid,
link-frequencies etc.) required for camera to work on AMD ISP4
based targets.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the handling consistent with other IPs and across
JPEG versions.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid using the mapping here.
v2: use amdgpu_xgmi_same_hive() as suggested by Felix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With engine resets we reset all queues on the engine rather
than just a single queue. Add a framework to handle this
similar to SDMA.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue reset support for jpeg 5.0.0.
Use the new helpers to re-emit the unprocessed state
after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue reset support for jpeg 4.0.5.
Use the new helpers to re-emit the unprocessed state
after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For kernel compute queues, align the timeout with
other kernel queues (10 sec). This had previously
been set higher for OpenCL when it used kernel
queues, but now OpenCL uses KFD user queues which
don't have a timeout limitation. This also aligns
with SR-IOV which already used a shorter timeout.
Additionally the longer timeout negatively impacts
the user experience with kernel queues for interactive
applications.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV environments, check if RLCG supports
SQ_CONFIG register programming.
Signed-off-by: Tony Yi <Tony.Yi@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to know the wptr and sequence number associated
with a fence so that we can re-emit the unprocessed state
after a ring reset. Pre-allocate storage space for
the ring buffer contents and add helpers to save off
and re-emit the unprocessed state so that it can be
re-emitted after the queue is reset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make them consistent and use the reset flags.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make them consistent and use the reset flags.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power control is only available in bare metal. SR-IOV
will need a different method.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start and stop can fail, so add checks.
Fixes: 74894ffc7d ("drm/amdgpu: Add ring reset callback for JPEG4_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Start and stop can fail, so add checks.
Fixes: 03399d0bff ("drm/amdgpu: Add ring reset callback for JPEG3_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Start and stop can fail, so add checks.
Fixes: 500c04d2a7 ("drm/amdgpu: Add ring reset callback for JPEG2_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Make them consistent and drop unneeded extra variables.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If kasprintf() fails, some mutex still need to be released to avoid locking
issue, as already done in all other error handling path.
Fixes: c03ea34cbf ("drm/amdgpu: add support of debugfs for mqd information")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/366557fa7ca8173fd78c58336986ca56953369b9.1752087753.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Added a handler in DRM buddy manager to reset the cleared
flag for the blocks in the freelist.
- This is necessary because, upon resuming, the VRAM becomes
cluttered with BIOS data, yet the VRAM backend manager
believes that everything has been cleared.
v2:
- Add lock before accessing drm_buddy_clear_reset_blocks()(Matthew Auld)
- Force merge the two dirty blocks.(Matthew Auld)
- Add a new unit test case for this issue.(Matthew Auld)
- Having this function being able to flip the state either way would be
good. (Matthew Brost)
v3(Matthew Auld):
- Do merge step first to avoid the use of extra reset flag.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250716075125.240637-2-Arunpravin.PaneerSelvam@amd.com
when loading bad page in the same nps mode, need to set the other fields
fields in eeprom records manually besides retired_page
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add eeprom data checksum check before driver unload. reset eeprom
and save correct data to eeprom when check failed
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the driver is unloaded, the interrupt source of
the rma device is not released, resulting in the failure
of hw_init when loading again using bad_page_threshold.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start and stop can fail, so add checks.
Fixes: b54695dae9 ("drm/amd: Add per-ring reset for vcn v5.0.0 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Start and stop can fail, so add checks.
Fixes: d1a46cdd00 ("drm/amd: Add per-ring reset for vcn v4.0.5 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Start and stop can fail, so add checks.
Fixes: b8b6e6f165 ("drm/amd: Add per-ring reset for vcn v4.0.0 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
The ring test needs to be inside the lock.
Fixes: 097af47d3c ("drm/amdgpu/gfx10: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
The ring test needs to be inside the lock.
Fixes: 4c953e53cc ("drm/amdgpu/gfx_9.4.3: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
The ring test needs to be inside the lock.
Fixes: fdbd69486b ("drm/amdgpu/gfx9: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
For current partition mode queries, return the mode cached in partition
manager whenever it's valid.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Among the scheduler's statuses, the only one that indicates an error is
DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV
signifies that the operation succeeded and the GPU is in a nominal state.
However, to provide more information about the GPU's status, it is needed
to convey more information than just "OK".
Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to
DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this
status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has
hung, but it has been successfully reset and is now in a nominal state
again.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
When a ring reset happens, amdgpu calls drm_dev_wedged_event() using
struct amdgpu_task_info *ti as one of the arguments. After using *ti, a
call to amdgpu_vm_put_task_info(ti) is required to correctly track its
lifetime.
However, it's called from a place that the ring reset path never reaches
due to a goto after drm_dev_wedged_event() is called. Move
amdgpu_vm_put_task_info() bellow the exit label to make sure that it's
called regardless of the code path.
amdgpu_vm_put_task_info() can only accept a valid address or NULL as
argument, so initialise *ti to make sure we can call this function if
*ti isn't used.
Fixes: a72002cb18 ("drm/amdgpu: Make use of drm_wedge_task_info")
Reported-by: Dave Airlie <airlied@gmail.com>
Closes: https://lore.kernel.org/dri-devel/CAPM=9tz0rQP8VZWKWyuF8kUMqRScxqoa6aVdwWw9=5yYxyYQ2Q@mail.gmail.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704030629.1064397-1-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
For normal hibernation, GPU do not need to be resumed in thaw since it is
not involved in writing the hibernation image. Skip resume in this case
can reduce the hibernation time.
On VM with 8 * 192GB VRAM dGPUs, 98% VRAM usage and 1.7TB system memory,
this can save 50 minutes.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-6-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When hibernate with data center dGPUs, huge number of VRAM BOs evicted
to GTT and takes too much system memory. This will cause hibernation
fail due to insufficient memory for creating the hibernation image.
Move GTT BOs to shmem in KMD, then shmem to swap disk in kernel
hibernation code to make room for hibernation image.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-3-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fix the smatch warning,
smatch warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:2146 amdgpu_pt_info_read()
error: we previously assumed 'fpriv' could be null (see line 2146)
"if (!fpriv && !fpriv->vm.root.bo)", It has to be an OR condition
rather than an AND which makes an NULL dereference in case fpriv is NULL.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507090525.9rDWGhz3-lkp@intel.com/
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250709071618.591866-1-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fix undefined reference to amdgpu_mqd_info_fops during
debugfs_create_file if DEBUG_FS=n
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250708101551.68033-1-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
This reverts commit 5fb90421fa.
The original patch moved `amdgpu_userq_mgr_fini()` to the driver's
`postclose` callback, which is called after `drm_gem_release()` in
the DRM file cleanup sequence.If a user application crashes or aborts
without cleaning up its user queues, 'drm_gem_release()` may free
GEM objects that are still referenced by active user queues, leading
to use-after-free. By reverting, we ensure that user queues are
disabled and cleaned up before any GEM objects are released,
preventing this class of bug. However, this reintroduces a race
during PCI hot-unplug, where device removal can race with per-file
cleanup, leading to use-after-free in suspend/unplug paths.
This will be fixed in the next patch.
Fixes: 5fb90421fa ("drm/amdgpu: fix slab-use-after-free in amdgpu_userq_mgr_fini+0x70c")
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a parameter to amdgpu_sdma_reset_engine() to let the
caller handle the kernel rings. This allows the kernel
rings to back up their unprocessed state if the reset comes in
via the drm scheduler rather than KFD.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the force completion handling into the common
engine reset function. No need to duplicate it for
every IP version.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For extended wait with retries on a PSP register value, add a noverbose
flag to avoid excessive error messages on each timeout.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to reinit the ring before remapping it and all of
the KIQ handling needs to be within the kiq lock.
Fixes: 1741281a15 ("drm/amdgpu/gfx10: add ring reset callbacks")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass amdgpu device context instead of drm device context to some
amdgpu_device_* functions. DRM device context is not required in those
functions. No functional change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs support for mqd for each queue of the client.
The address exposed to debugfs could be used to dump
the mqd.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-5-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add a debugfs file under the client directory which shares
the root page table base address of the VM.
This address could be used to dump the pagetable for debug
memory issues.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-4-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e9d17a5dc)
Cc: stable@vger.kernel.org
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cf66089e2)
Cc: stable@vger.kernel.org
This got missed during SDMA 4.4.4 support.
Fixes: 968e3811c3 ("drm/amdgpu: add initial support for sdma444")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51526efe02)
Cc: stable@vger.kernel.org
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 61feed0baa)
Fill in the SDMA ucode version checks for more SDMA 6.x parts.
v2: squash in fixes (Alex)
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The timeout is only used to interrupt polling and
not need to print a error message.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cocci warnings: (new ones prefixed by >>)
>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6088:8-9:
Unneeded variable: "r". Return "0" on line 6141
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506281925.HHIpXiO7-lkp@intel.com/
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when eeprom initialization failed, we still support ras error injection,
and reserve bad pages, but do not save bad pages to eeprom
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The severity of CPER for BP threshold exceed event should be set as
CPER_SEV_FATAL to match the OOB implementation.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the scheduler wqueue stopping and starting into
the ring reset callbacks. On some IPs we have to reset
an engine which may have multiple queues. Move the wqueue
handling into the backend so we can handle them as needed
based on the type of reset available.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move guilty logic into the ring reset callbacks. This
allows each ring reset callback to better handle fence
errors and force completions in line with the reset
behavior for each IP. It also allows us to remove
the ring guilty callback since that logic now lives
in the reset callback.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the force completion handling into each ring
reset function so that each engine can determine
whether or not it needs to force completion on the
jobs in the ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stopping the scheduler for queue reset is generally a good idea because
it prevents any worker from touching the ring buffer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Going forward, we'll need more than just the vmid. Add the
guilty amdgpu_fence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
What we actually care about is the amdgpu_fence object
so pass that in explicitly to avoid possible mistakes
in the future.
The job_run_counter handling can be safely removed at this
point as we no longer support job resubmission.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were missed when support was added for other generations.
The callbacks are called unconditionally so we need to make
sure all generations have them.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4304
Link: https://github.com/ROCm/ROCm/issues/4965
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Cc: Jonathan Kim <jonathan.kim@amd.com>
Reported-by: Johl Brown <johlbrown@gmail.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "return true;" line wasn't indented. Also checkpatch likes when
we align the && conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>