Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Start making some SMPS related code MLD-aware. This isn't
really done yet, but again cuts down our 'deflink' reliance.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.
Some adjustments were done with the following spatch:
@@
expression sdata;
struct ieee80211_vif *vifp;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
(
-sdata->vif.bss_conf.var
+sdata->vif.cfg.var
|
-vifp->bss_conf.var
+vifp->cfg.var
)
@bss_conf@
struct ieee80211_bss_conf *bss_conf;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
-bss_conf->var
+vif_cfg->var
(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using half of the efivar API with locally baked efivar_entry instances
is not the right way to use this API, and these uses impede planned work
on the efivar layer itself.
So switch to direct EFI variable store accesses: we don't need the
efivar layer anyway.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
At least mips64 has ist own CAUSE macro, so rename ours to
IWL_CAUSE to fix build issues.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: c191819642 ("iwlwifi: pcie: simplify MSI-X cause mapping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
GCC 12 says:
drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds]
1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF)
| ~~~~~~~~~~~~~~~~^~~~~
Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Second set of patches for v5.19 and most likely the last one. rtw89
got support for 8852ce devices and mt76 now supports Wireless Ethernet
Dispatch.
Major changes:
cfg80211/mac80211
* support disabling EHT mode
rtw89
* add support for Realtek 8852ce devices
mt76
* Wireless Ethernet Dispatch support for flow offload
* non-standard VHT MCS10-11 support
* mt7921 AP mode support
* mt7921 ipv6 NS offload support
ath11k
* enable keepalive during WoWLAN suspend
* implement remain-on-channel support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmKGYt4RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuK2gf/ZswLtwE2CIwrEhz/Q0MDtxUvw8ulRhKl
d+1PC+bCd/VArMESjpu7le+WNAZ1OPBWdh1pgkDm8QpCQZYe7/hRED82DB/Jw3Cl
KmOx2nr6Xb4uEN+yjqZrSXzA+Hrysy24bCQRG2CJKjdToe/fwTuRiz8WIcPKtxio
b/d/Kz0LpSoHTlU1PzqIsXulN8QUKJA4kRw70rJHAlMJVYiTBuAD+AmXfbhHD8uX
t2CJDH2fykDd1CAWFQwcmI++2tS+xclYL81vDg3aEinQJ9aNcDz06qSE5qr2H+K5
lUYy42yc+ONkIIh8LlxrLgZie7oSmkrb7aA0Zc+F0SWp/B6ZO/k8FA==
=aILH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
Second set of patches for v5.19 and most likely the last one. rtw89
got support for 8852ce devices and mt76 now supports Wireless Ethernet
Dispatch.
Major changes:
cfg80211/mac80211
- support disabling EHT mode
rtw89
- add support for Realtek 8852ce devices
mt76
- Wireless Ethernet Dispatch support for flow offload
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 ipv6 NS offload support
ath11k
- enable keepalive during WoWLAN suspend
- implement remain-on-channel support
* tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (135 commits)
iwlwifi: mei: fix potential NULL-ptr deref
iwlwifi: mei: clear the sap data header before sending
iwlwifi: mvm: remove vif_count
iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS
iwlwifi: mvm: add OTP info in case of init failure
iwlwifi: mvm: fix assert 1F04 upon reconfig
iwlwifi: fw: init SAR GEO table only if data is present
iwlwifi: mvm: clean up authorized condition
iwlwifi: mvm: use NULL instead of ERR_PTR when parsing wowlan status
iwlwifi: pcie: simplify MSI-X cause mapping
rtw89: pci: only mask out INT indicator register for disable interrupt v1
rtw89: convert rtw89_band to nl80211_band precisely
rtw89: 8852c: update txpwr tables to HALRF_027_00_052
rtw89: cfo: check mac_id to avoid out-of-bounds
rtw89: 8852c: set TX antenna path
rtw89: add ieee80211::sta_rc_update ops
wireless: Fix Makefile to be in alphabetical order
mac80211: refactor freeing the next_beacon
cfg80211: fix kernel-doc for cfg80211_beacon_data
mac80211: minstrel_ht: support ieee80211_rate_status
...
====================
Link: https://lore.kernel.org/r/20220519153334.8D051C385AA@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We used to count the number of ieee80211_vifs in mvm.
This was needed for the legacy PM API, which is no longer
supported. Remove it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120045.8c91ae023b15.Ia6145e4930b1d28f3fcedc316b4f177295b00557@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make the firmware's life easier and always accept MCAST frames. If
needed, drop them in the driver. We need to filter out MCAST frames
in order not to have false positives in the decryption check. If we
accept MCAST frames before we have the GKT installed, we'll end up
complaining that we can't decrypt the frame.
Implement the same filtering, but in the driver.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120045.479956a46317.I21fac7ede9eca85a662671d694872898df884f0b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When no table data was read from ACPI, then filling the data
and returning success here will fill zero values, which means
transmit power will be limited to 0 dBm. This is clearly not
intended.
Return an error from iwl_sar_geo_init() if there's no data to
fill into the command structure.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 78a19d5285 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.bc45923b74e9.Id2b4362234b7f8ced82c591b95d4075dd2ec12f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We track in mvmvif->authorized when the AP STA becomes authorized
and no longer authorized, so we don't need the complex condition
with station lookup. Simplify the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.41f528383a6b.I1cdf165581b781c53c8e6ac8779a2282b1f67c59@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We're currently manually encoding a calculation here since the HW
just maps all the bits of specific registers to specific offsets,
which led to the bug fixed here previously with the Bz SW_ERROR
interrupt.
Clean up the code to only know about the mapping offset (-16 or
16 depending on the register) to avoid such issues in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.19abe9a4d171.I934356911277f9b2a955808763f317986f69a461@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In Chrome OS, a large number of crashes is observed due to corrupted timer
lists. Steven Rostedt pointed out that this usually happens when a timer
is freed while still active, and that the problem is often triggered
by code calling del_timer() instead of del_timer_sync() just before
freeing.
Steven also identified the iwlwifi driver as one of the possible culprits
since it does exactly that.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Fixes: 60e8abd9d3 ("iwlwifi: dbg_ini: add periodic trigger new API support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Linux v5.17.3-rc1 and Debian LLVM-14
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220411154210.1870008-1-linux@roeck-us.net
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220406015444.14408-1-tangmeng@uniontech.com
When we're copying the PPAG table into the cmd structure we're failing
if the table doesn't exist in ACPI or is invalid, or if the FW doesn't
support PPAG setting etc.
This is wrong because those are valid scenarios. Fix this by not
failing in those cases.
Fixes: e8e10a37c5 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220322173828.fa47f369b717.I6a9c65149c2c3c11337f3a802dff22f514a3a436@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building iwlmei without CONFIG_CFG80211 causes a link-time warning:
ld.lld: error: undefined symbol: ieee80211_hdrlen
>>> referenced by net.c
>>> net/wireless/intel/iwlwifi/mei/net.o:(iwl_mei_tx_copy_to_csme) in archive drivers/built-in.a
Add an explicit dependency to avoid this. In theory it should not
be needed here, but it also seems pointless to allow IWLMEI
for configurations without CFG80211.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Emmanuel Grumbach <Emmanuel.grumbach@intel.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316183617.1470631-1-arnd@kernel.org
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
-----BEGIN PGP SIGNATURE-----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=ccps
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today in the code we have two options for collecting data sync/schedule,
the two options call the same function and can lead to racing in free
resources after done.
So we call only one of two sync/schedule, and in case of sync only
call sync function without also schedule to immediately run as a side
job.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The module param "enable_ini" is currently used to be enable/disable ini.
Add the option to configure the FW debug preset via this module param,
by change it type from boolean to an integer.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Propagate the value to the user space so it can understand
if the operation failed or not.
Fixes: bfcfdb59b6 ("iwlwifi: mvm: add vendor commands needed for iwlmei")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When CONFIG_IWLWIFI=m and CONFIG_IWLMEI=y, the kernel build system
must be told to build the iwlwifi/ subdirectory for both IWLWIFI and
IWLMEI so that builds for both =y and =m are done.
This resolves an undefined reference build error:
ERROR: modpost: "iwl_mei_is_connected" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!
Fixes: 977df8bd58 ("wlwifi: work around reverse dependency on MEI")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20220227200051.7176-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet. To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To avoid a run-time false positive in the stricter FORTIFY_SOURCE
memcpy() checks, split the memcpy() into the struct and the data.
Additionally switch the data member to a flexible array to follow
modern language conventions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210727205855.411487-64-keescook@chromium.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Return -ENODEV instead of success on this error path.
Fixes: dd36a507c8 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210816183930.GA2068@kili
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.
Addresses-Coverity: ("Unused value")
Fixes: 7335613ae2 ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kmalloc(). For example:
struct iwl_wipan_noa_data {
...
u8 data[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060926.1608378-1-chi.minghao@zte.com.cn
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220216030841.1839666-1-chi.minghao@zte.com.cn
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032322.37472-1-cai.huoqing@linux.dev
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Change the comparison from ">" to ">=" to avoid accessing one element
beyond the end of the ->per_mac_stats[] array.
Fixes: 6324c173ff ("iwlwifi: mvm: add support for statistics update version 15")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220106071825.GA5836@kili
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
During disassociation we're decreasing the phy's ref count.
If the ref count becomes 0, we're configuring the phy ctxt
to the default channel (the lowest channel which the device
can operate on). Currently we're not checking whether the
the default channel is enabled or not. Fix it by configuring
the phy ctxt to the lowest channel which is enabled.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.03f281b6a6bc.I5b63d43ec41996d599e6f37ec3f32e878b3e405e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to some issues found in integration, the command now has
the (old) station mask and TID in modify/remove instead of
the BAID, adjust accordingly.
Since we don't use modify yet (and never will with v1 of the
API), just add v1 remove inside the existing union, and use
that, this way we don't have to duplicate everything, only
the remove code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.bc424f15cc4b.I06d9acae11dc69b2500666f497017a3fd4e2acd5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Newer firmware versions will support a new queue allocation
command, in order to deal with MLD where multiple stations
are used for a single queue. Add support for the new command.
This requires some refactoring of the queue allocation API,
which now gets
- the station mask instead of the station ID
- the flags without the "enable" flag, since that's no longer
used in the new API
Additionally, this new API now requires that we remove queues
before removing a station, the firmware will no longer do that
internally. Also add support for that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add logs in rs_fw_rate_init function. It helps in
verifying TLC Configuration while debuging TLC related bugs.
Update kernel doc for TLC_MNG_CONFIG_CMD with correct version
of struct iwl_tlc_config_cmd.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Fixes: ae4c1bb06b ("iwlwifi: rs: add support for TLC config command ver 4")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.1fd6adfb6f1e.Icc8f5fd517735fcc10db098999ff1272da291298@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The command ID here is always hard-coded to the same, so we
can remove it. In the future we actually need to make this
configurable, but that doesn't need to be on each call, it
can be done through the transport configuration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.8b352828f767.Ice4c91d8ea3e207914104e72801b87cd7f409ba7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The firmware will soon stop removing the session protection for us after
association. While this was convenient, it was not symmetric.
Always remove the session protection after association, even for devices
that support the new API.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.9fd32da15220.Ia88357dcf9f7ec7860f6111e41411868739cc9aa@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We are setting the PPE Thresholds in STA_HE_CTXT_CMD according
to HE PHY Capabilities IE. As EHT is introduced, we will have to
set this thresholds according to EHT PHY Capabilities IE if we're
in an EHT connection. Some parts of the code can be used for both
HE and EHT. Put this parts in functions which will be used in the
patch which adds support for EHT PPE.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.48a508dfffef.If392e44d88f96ebed7fadf827e327194d4bd97b1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
With the new ML API, we can't send the BAID removal command to
firmware during hw_restart because it will cause an assertion failure
0x350D because the BAID doesn't exist at that point.
So avoid sending the command if we are performing a hw_restart.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.7b363457e1aa.Ie4634222e6a33451b88e1042c83e9ea28775bd9f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes RFIm can be deactivated in FW due to internal
errors. In this case, FW will send a notification to the
driver about that. Add a log message in this case since
FW logs are not always available.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.48d0a1624fec.I8f9271959fc53223fa329ab097b12fd69b498b71@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
A scan during active P2P GO operation, i.e., data traffic with
clients, can impact the throughput and latency of such traffic.
Thus, when scan is requested while there is an active P2P GO
and low latency is asserted:
- Ask the FW scan logic to respect the P2P GO activity during the
scheduling of the scan operation to minimize the impact on the
throughput and latency.
- Force scan to perform EBS before starting the scan to reduce the
number of scanned channels.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.4412036f4889.Ied677fdd31765437e19905787708bd05f62663ba@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's no good reason to pick the opmode first and load this
under the mutex, so just load it before continuing. This will
let us load it asynchronously more easily later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a28df852f70d.Icaf6556d81bc137a459aabf0511d46c3861b0413@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The Bz devices got a new completion descriptor again since
we only ever really used 4 out of 32 bytes anyway. Adjust
the code to deal with that. Note that the intention was to
reduce the size, but the hardware was implemented wrongly.
While at it, do some cleanups and remove the union to simplify
the code, clean up iwl_pcie_free_bd_size() to no longer need
an argument and add iwl_pcie_used_bd_size() with the logic to
selct completion descriptor size.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.bef461a04110.I90c8885550fa54eb0aaa4363d322f50e301175a6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Non PSC channels should generally be scanned based on information about
collocated APs obtained during scan on legacy bands, and otherwise
should not be scanned unless specifically requested so (as there are
relatively many non PSC channels, scanning them passively is time consuming
and interferes with regular data traffic).
Thus, modify the scan logic to avoid passively scanning PSC channels
if there is no information about collocated APs and the scan is not
a passive scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.457da4cc95eb.Ic98472bab5f5475f1e102547644caaae89ce4c4a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The config set TLV setting depend on dram allocation
and if allocation failed the data used in config set tlv
should not set this.
Adding the check if dram fragment is available or not.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Fixes: 1a5daead21 ("iwlwifi: yoyo: support for ROM usniffer")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.44835d181528.I3e78ba29c13bbeada017fcb2a620f3552c1dfa30@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Somehow, sparse cannot track the cond_lock() here properly,
but if we return directly from the inner basic block then
it doesn't complain. Refactor the code a bit to make it not
complain.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220130115024.3f9de2d59929.Ib6324e93951ee877754538c89f3ab2a84998bd40@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shaul Triebitz
Johannes Berg
Ard Biesheuvel
Jakub Kicinski
Avraham Stern
Miri Korenblit
Emmanuel Grumbach
Mordechay Goodstein
Haim Dreyfuss
Guenter Roeck
Sriram R
Meng Tang
Haowen Bai
Gustavo A. R. Silva
Arnd Bergmann
Luca Coelho
Matt Chen
Mukesh Sisodiya
Ayala Barazani
Randy Dunlap
Golan Ben Ami
Kees Cook
Dan Carpenter
Colin Ian King
Bixuan Cui
Xiang wangx
Minghao Chi (CGEL ZTE)
Cai Huoqing
Yaara Baruch
Abhishek Naik
Gregory Greenman
Ilan Peer
Matti Gottlieb