Sprinkle some asserts to catch any mishaps in the port_mask
vs. output init.
For DDI/DP/HDMI/SDVO I decided that we want to bail out for
an invalid port since those are the encoder types where
we might want consider driving the whole thing from the VBT
child device list, and bogus VBTs could be a real issue
(if for no other reason than the i915.vbt_firmware).
For DVO and HSW/BDW CRT port I just threw the assert in
there for good measure.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-5-ville.syrjala@linux.intel.com
Move the runtime info specific to display into display-specific
structures as has already been done with the constant display info.
v2:
- Rename __runtime to __runtime_defaults for more clarity on the
purpose. (Andrzej)
- Move introduction of DISPLAY_INFO() to previous patch. (Andrzej)
- Drop NO_DISPLAY macro. (Andrzej)
v3:
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-4-matthew.d.roper@intel.com
Rather than embeddeding the display's device info within the main device
info structure, just provide a pointer to the display-specific
structure. This is in preparation for moving the display device info
definitions into the display code itself and for eventually allowing the
pointer to be assigned at runtime on platforms that use GMD_ID for
device identification.
In the future, this will also eventually allow the same display device
info structures to be used outside the current i915 code (e.g., from the
Xe driver).
v2:
- Move introduction of DISPLAY_INFO() to this patch. (Andrzej)
v3:
- Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej)
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-3-matthew.d.roper@intel.com
During HW readout/sanitization CRTCs can be disabled only if they don't
have an attached encoder (and so the encoder disable hooks don't need to
be called). An upcoming patch will need to disable CRTCs also with an
attached encoder, so add support for this.
For bigjoiner configs the encoder disabling hooks require the slave CRTC
states, so add these too to the atomic state. Since the connector atomic
state is already up-to-date when the CRTC is disabled the connector
state needs to be updated (reset) after the CRTC is disabled, make this
so. Follow the proper order of disabling first all bigjoiner slaves,
then any port synced CRTC slaves followed by the CRTC originally
requested to be disabled.
v2:
- Fix calculating the bigjoiner_masters mask in a port sync config,
(Ville)
- Keep _noatomic suffix in intel_crtc_disable_noatomic(). (Ville)
- Rebase on full CRTC state reset in this patchset, not requiring
resetting the bigjoiner state separately and (instead) resetting
the full atomic CRTC and related global state after all linked
pipes got disabled.
- Disable portsync slaves before a portsync master.
- Disable a portsync master if a linked portsync slave is disabled.
v3: (Ville)
- Use s/u32/u8 for transcoder and pipe masks.
- Use is_power_of_2() instead of hweight()==1.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-8-imre.deak@intel.com
Add i915 parameter to I915_STATE_WARN() and use device based logging.
Done using cocci + hand edited where there was no i915 local variable
ready.
v2: avoid null deref in verify_connector_state()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
The only way to truly clean up intel_display.[ch] is to move stuff out
of them until there's absolutely nothing left.
Start moving the high level display driver entry points, i.e. functions
called from top level driver code only, to a new file, which we'll call
intel_display_driver.c. The intention is that there's no low-level
display code or details here. This is an in-between layer.
Initially, move intel_display_driver_register() and
intel_display_driver_unregister() there.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e42cc037881a4c6042948a34bd4a9698f9e8487c.1681465222.git.jani.nikula@intel.com
Move the TC port specific fields from intel_digital_port to a new
intel_tc_port struct. Pass an intel_tc_port pointer to all static
functions in intel_tc.c keeping dig_port accessible for these via a
pointer stored in the new struct.
The next patch will allocate the intel_tc_port dynamically, allowing
moving the struct definition to intel_tc.c.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com
Move intel_crtc_update_active_timings() into intel_vblank.c
where it more properly belongs.
Also do the s/dev_priv/i915/ modernization rename while at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-3-ville.syrjala@linux.intel.com
Restructure intel_bios_port_aux_ch() to resemble the ddc_pin
counterpart, where the intel_bios.c stuff only deals with the
child device definition, and the platform default will come from
elsewhere.
This requires the introduction of AUX_CH_NONE as the value 0
is already taken to mean AUX_CH_A.
v2: Sort includes alphabetically (Ankit)
vCould we ask them to do a BIOS fix for all of them so that
we wouldn't keep getting these bug reports for each model
separately?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216231312.32664-1-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Move sanitize_watermarks() to i9xx_wm.[ch] and rename as
ilk_wm_sanitize(). The slightly unfortunate downside is having to expose
intel_atomic_check() from intel_display.c, but this declutters
intel_display.c nicely.
v2:
- Move to i9xx_wm.[ch] instead of intel_wm.[ch] (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215141910.433043-1-jani.nikula@intel.com
Move a handful of key enums to a new file intel_display_limits.h. These
are the enum types, and the MAX/NUM enumerations within them, that are
used in other headers. Otherwise, there's no common theme between them.
Replace intel_display.h include with intel_display_limit.h where
relevant, and add the intel_display.h include directly in the .c files
where needed.
Since intel_display.h is used almost everywhere in display/, include it
from intel_display_types.h to avoid massive changes across the
board. There are very few files that would need intel_display_types.h
but not intel_display.h so this is neglible, and further cleanup between
these headers can be left for the future.
Overall this change drops the direct and indirect dependencies on
intel_display.h from about 300 to about 100 compilation units, because
we can drop the include from i915_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116164644.1752009-1-jani.nikula@intel.com
Since the color management code is the only user of the DSB
at the moment move the DSB prepare/cleanup there too. The
code has to anyway make decisions on whether to use the DSB
or not (and how to use it). Also we'll need a place where we
actually generate the DSB command buffer ahead of time rather
than the current situation where it gets generated too late
during the mmio programming of the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmNcHTsACgkQ+mJfZA7r
E8pXrwgAgYH8DQu+/C+gu4cB7wOQC+flrCAinCRaxE88q7iWDoQoY+XFdBLq9vEM
QWNAmnUG53+z1rW1+EAVoIDhRz7yYnsxScLj/FijJl52hNNP3QkZP4iZuAMJyQy2
NYDOQyzvLBGmOIDgz+4YBtqk28eiX8x0+sYSA/JuLU5lL1zXFeXt2pFt2kcAnT/S
Fe1MajA3TxLO9lAhnEzEUD3X/xLz5D/91BQS+7OL8n24Hxb9kBZ0N1UbwDOCDegc
NEGpQmJTJnkGTAEQ8tlqnvMgHUbGmm3OEImamfC2QGvIdolF8zax9baNKoUts7BZ
CaBDK2NK//W+sYl52Tig4pCv36bPdw==
=91XL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
Remove one use macro for_each_connector_on_encoder which
is only being used at intel_encoder_find_connector.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020104635.874860-2-suraj.kandpal@intel.com
drm/i915 feature pull #2 for v6.1:
Features and functionality:
- More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha)
- Allow seamless M/N changes on eDP panels that support it (Ville)
- Switch DSC debugfs from output bpp to input bpc (Swati)
Refactoring and cleanups:
- Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville)
- Plenty of VBT definition and parsing updates and cleanups (Ville)
- Extract SKL watermark code to a separate file, and clean up (Ville)
- Clean up IPC interfaces and debugfs (Jani)
- Continue moving display data under drm_i915_private display sub-struct (Jani)
- Display quirk handling refactoring and abstractions (Jani)
- Stop using implicit dev_priv in gmbus registers (Jani)
- BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani)
- Use drm_dp_phy_name() for logging (Jani)
- Use REG_BIT() macros for CDCLK registers (Stan)
- Move display and media IP versions to runtime info (Radhakrishna)
Fixes:
- Fix DP MST suspend to avoid use-after-free (Andrzej)
- Fix HPD suspend to avoid use-after-free for fbdev (Andrzej)
- Fix various PSR issues regarding selective update and damage clips (Jouni)
- Fix runtime pm wakerefs for driver remove and release (Mitul Golani)
- Fix conditions for filtering fixed modes for panels (Ville)
- Fix TV encoder clock computation (Ville)
- Fix dvo mode_valid hook return type (Nathan Huckleberry)
Merges:
- Backmerge drm-next to sync the DP MST atomic changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
Even more details at:
https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html
Driver Changes:
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix#6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
So far, different views (normal, partial, rotated and remapped)
into the same object are only supported for GGTT mappings.
But with the upcoming VM_BIND feature, PPGTT will also use the
partial view mapping. Hence rename ggtt_view to more generic
gtt_view.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com
Eliminate the PIPECONF RMWs from .comit_commit() so
that we can finally declare the whole vblank evade part
(and the noarm() part) of the pipe commit free of register
reads. Or at least I hope that's the last read...
Only the i9xx/ilk codepaths need this for now, but let's
add the same thing for hsw+ just in case we want to start
calling that during fastsets at some point (eg. to change
dithering settings/etc.).
Should open up the way to start experimenting with
different DSB usage approaches for pipe commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413192607.27533-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.
Fix some minor checkpatch issues while at it.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com
Extract intel_crtc_dotclock() from ddi_dotclock_get(). We'll reuse
this during state computation in order to determine the actual final
dotclcok after the DPLL computation has been done (which may not give
us the exact same port_clock that we fed in).
v2: Add the prototype
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504123350.13235-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Often using pipes is more convenient than crtc indices.
Convert the current for_each_intel_crtc_mask() to take a
pipe mask instead of a crtc index mask, and rename it to
for_each_intel_crtc_in_pipe_mask() to make it clear what
it does.
The current users of for_each_intel_crtc_mask() don't really
care which kind of mask we use, but for other uses a pipe
mask if better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
IPS is a pretty well isolated feature. Move the relevant code
to a separate file from polluting intel_display.c.
I stuck to the hsw_ips name since that's what the function were
already using, and also to avoid confusion with the ILK
"Intelligen Power Sharing"/intel_ips GPU turbo stuff.
And let's also do the s/dev_priv/i915/ rename while touching
most of the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason the caller of the IPS pre/post update hooks should
be responsible for the actual IPS enab/disable. Just pull those
calls into the pre/post update hooks themselves. And while
at it let's adjust the function naming a bit to have a consistent
namespace.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Hoist the IPS related vblank waits one level up. Later on we'll
want to consolidate all the potential pre-plane update vblank
waits into one so we can't be hiding any in low level code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make life simpler by always programming DP M2/N2 with a consistent
value. This will lets use do state readout+chec unconditionally.
I was first going to just set M2/N2=M1/N1 but then it occurred
to me that it might interfere with fastboot on account of BIOS
likely leaving the registers zeroed. So let's zero out the values
instead (except TU where a zero register value actually means '1').
Still not sure that's the best approach but lets go with it for
now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.
v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.
Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.
Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to make a clean split betwen the CPU vs. PCH transcoder
programming. To that end eliminate intel_dp_set_m_n() and just
call the individual CPU/PCH transcoder functions directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:
In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
| ^~~~~~~
cc1: all warnings being treated as errors
Add a declaration of the struct to fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53d ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.
Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com
Move intel_format_info_is_yuv_semiplanar() to intel_fb.c . The number of
planes for YUV semiplanar formats using CCS modifiers will change on
future platforms. We can use the modifier descriptors to simplify
getting the plane numbers for all modifiers, prepare for that here.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-7-imre.deak@intel.com
Pull the ilk+ PCH state readout into its own function and relocate
to the appropriate file.
The clock readout parts are perhaps a bit iffy since we depend
on the gmch DPLL readout code. But we can think about the clock
readout big picture later.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-6-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Nuke the hsw_get_ddi_port_state() eyesore by putting the
readout code into intel_pch_display.c, and calling it directly
from hsw_crt_get_config().
Note that the nuked TRANS_DDI_FUNC_CTL readout from
hsw_get_ddi_port_state() is now etirely redundant since we
get called from the encoder->get_config() so we already know
we're dealing with the correct DDI port. Previously the
code was called from a place where that wasn't known so
it had to checked manually.
v2: Clarify the TRANS_DDI_FUNC_CTL change (Dave)
Nuke the now unused *TRANS_DDI_FUNC_CTL_VAL_TO_PORT() (Dave)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018153525.21597-1-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Start moving the code for PCH modeset sequence/etc. to
its own file.
Still not sure about the file name though...
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Move the PCH refclk stuff (including all the LPT/WPT
iCLKIP/CLKOUT_DP things) to its own file.
We also suck in the mPHY programming from intel_fdi.c
since we're the only caller.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Move assert_panel_unlocked() to intel_pps.c and rename
assert_pps_unlocked(). Keep the functionality and the assert code
together.
There's still a bit of a split between the eDP PPS usage in intel_pps.c
and all the other PPS usage, and assert_pps_unlocked() is arguably more
related to the latter. However, intel_pps.c is the best fit for anything
touching the PPS registers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a9b77692a145891789eefb0447e082cfc22aaa85.1632992608.git.jani.nikula@intel.com
A follow-up change will start to disconnect/re-connect PHYs around AUX
transfers and modeset enable/disables. To prepare for that add a new
TypeC PHY disconnected mode, to help tracking the TC-cold blocking power
domain status (no power domain in disconnected state, mode dependent
power domain in connected state).
v2: Move the !disconnected mode and phy-owned asserts in
__intel_tc_port_lock() later in the patchset, when the asserts will
hold. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-3-imre.deak@intel.com
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.
I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Although the bspec labels four of DG2's outputs as "combo PHY," the
underlying PHYs in both cases are actually Synopsys PHYs that are
programmed completely differently than the traditional Intel "combo" PHY
units. As such, we don't want intel_phy_is_combo to take us down legacy
programming paths, so just return false from it on DG2. Instead add a
new intel_phy_is_snps() that will return true for all DG2 PHYs.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-46-matthew.d.roper@intel.com
Move intel_modeset_all_pipes() to a central place so that we can
use it elsewhere as well. No functional changes.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-12-matthew.d.roper@intel.com
The DDI naming template for display version 12 went A-C, TC1-TC6. With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.
The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously. The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.
For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value. However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth). We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.
v2:
- Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose)
v3:
- Add hpd_pin to handle outputs D and E (Jose)
- Fixed conversion of BIOS port to aux ch for TC ports (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-2-matthew.d.roper@intel.com
Add support for DPT (display page table). DPT is a
slightly peculiar two level page table scheme used for
tiled scanout buffers (linear uses direct ggtt mapping
still). The plane surface address will point at a page
in the DPT which holds the PTEs for 512 actual pages.
Thus we require 1/512 of the ggttt address space
compared to a direct ggtt mapping.
We create a new DPT address space for each framebuffer and
track two vmas (one for the DPT, another for the ggtt).
TODO:
- Is the i915_address_space approaach sane?
- Maybe don't map the whole DPT to write the PTEs?
- Deal with remapping/rotation? Need to create a
separate DPT for each remapped/rotated plane I
guess. Or else we'd need to make the per-fb DPT
large enough to support potentially several
remapped/rotated vmas. How large should that be?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Wilson Chris P <Chris.P.Wilson@intel.com>
Cc: Tang CQ <cq.tang@intel.com>
Cc: Auld Matthew <matthew.auld@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Wilson Chris P <Chris.P.Wilson@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-5-imre.deak@intel.com
I doubt anyone has used the display error state since CS flips
went the way of the dodo. Just nuke it.
It might be semi interesting to have something like this for
FIFO underruns and the like, but as it stands this wouldn't
provide a sufficient amount of information. So would need
an extensive rewrite anyway.
The lockless power well handling is also racy, so this could
just be contributing noise to test results if we end up
accessing something with the relevant power well already
disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505191140.14215-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Now that we have the dbuf slice mask stored in the device info
let's use it for for_each_dbuf_slice_in_mask*().
With this we cal also rip out intel_dbuf_size() and
intel_dbuf_num_slices().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com
struct drm_i915_private, struct intel_crtc_state and
struct intel_crtc is declared twice.
Remove the duplicate.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326012527.875026-1-wanjiabing@vivo.com
Get rid of the nonsense cursor special case in verify_wm_state()
by just iterating through all the planes. And let's use the
canonical [PLANE:..] style in the debug prints while at it.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Now that all display-related functions are grouped in
i915_driver_register(), move them to display/ so we reduce the amount of
display calls from the rest of the driver.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210213042756.953007-3-lucas.demarchi@intel.com
This moves the code from various places and consolidates it
into one new file.
v2:
- rename skl_program_plane -> skl_program_plane_scaler (Ville)
- also move skl_pfit_enable, and consequently make some skl_scaler_*
functions static to skl_scaler.c (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
Rework the plane init calls to do the gen test one level higher.
Rework some of the plane helpers so they can live in new file,
there is still some scope to clean up the plane/fb interactions
later.
v2: drop atomic code back, rename file to Ville suggestions,
add header file.
v3: move scaler bits back
v4: drop wrong new includes (Ville)
v5: integrate the ccs gen12 changes
v6: fix unrelated code movement (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: fixed up sparse warnings.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e88a5c6b9ab3b93cc2b6c7d78c26ae86f6abbd0.1612536383.git.jani.nikula@intel.com
It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.
v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
- Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
- Remove wrong comments and add comments for a limit of supporting of
a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
PSR on BDW+
v8: Address Anshuman's review comments
- Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
- Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
- In order to reduce changes keep the old name for drm_i915_private.
- Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
- Change the calling of intel_psr2_program_trans_man_trk_ctl() into
commit_pipe_config().
- Change a checking order of CAN_PSR() and connector_status to original
on i915_psr_sink_status_show().
- Drop unneeded intel_dp_update_pipe() function.
- In order to wait a specific encoder which belong to crtc_state on
intel_psr_wait_for_idle(), add checking of encoder.
- Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
- Add and use for_each_intel_psr_enabled_encoder() macro.
- In order to use correct frontbuffer_bit for each pipe,
fix intel_psr_invalidate() and intel_psr_flush().
- Remove redundant or unneeded codes.
- Update comments.
v14: Address Jose's review comment
- Add and use for_each_intel_encoder_can_psr() macro and
for_each_intel_encoder_mask_can_psr() macro.
- Add source_support member variable into intel_psr structure.
- Update CAN_PSR() macro that checks source_support.
- Move encoder's PSR availity check to psr_init() from
psr_compute_config().
- Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
intel_psr2_program_trans_man_trk_ctl()
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
intel_display.c has some pps functions that belong to intel_pps.c. Move
them over.
While at it, refactor the duplicate intel_pps_init() in intel_display.c
into an orthogonal intel_pps_setup() in intel_pps.c, and call it earlier
in intel_modeset_init_nogem().
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120101834.19813-2-jani.nikula@intel.com
This pulls a large chunk of the pll calculation code out of
intel_display.c to a new file.
One function makes sense to be an inline, otherwise this
is pretty much a straight copy cover. Also all the
remaining hooks for g45 and older end up the same now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: cleaned up intel_dpll.h a bit, de-duped intel_panel_use_ssc().]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74b58e0572858b5d1734818ca594a23040d7d44f.1610622609.git.jani.nikula@intel.com
Jani Nikula
Ville Syrjälä
Matt Roper
Imre Deak
Rodrigo Vivi
Dave Airlie
Suraj Kandpal
Niranjana Vishwanathapura
Tvrtko Ursulin
Mark Brown
Hans de Goede
Wan Jiabing
Maarten Lankhorst
José Roberto de Souza
Lucas De Marchi
Gwan-gyeong Mun