mirror of https://github.com/torvalds/linux.git
1318 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
f55b0671e3 |
More power management updates for 6.14-rc1
- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang).
- Revert a commit that added unused macros (Andy Shevchenko).
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed during
the subsequent system-wide resume transition (Rafael Wysocki).
- Clean up the teo cpuidle governor and make the handling of short idle
intervals in it consistent regardless of the properties of idle
states supplied by the cpuidle driver (Rafael Wysocki).
- Fix some boost-related issues in cpufreq (Lifeng Zheng).
- Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh
Kumar).
- Remove unconditional binding of schedutil governor kthreads to the
affected CPUs if the cpufreq driver indicates that updates can happen
from any CPU (Christian Loehle).
-----BEGIN PGP SIGNATURE-----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=EgsM
-----END PGP SIGNATURE-----
Merge tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the previously merged power
management material with the addition of some teo cpuidle governor
updates, some of which may also be regarded as fixes:
- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang)
- Revert a commit that added unused macros (Andy Shevchenko)
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed
during the subsequent system-wide resume transition (Rafael
Wysocki)
- Clean up the teo cpuidle governor and make the handling of short
idle intervals in it consistent regardless of the properties of
idle states supplied by the cpuidle driver (Rafael Wysocki)
- Fix some boost-related issues in cpufreq (Lifeng Zheng)
- Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh
Kumar)
- Remove unconditional binding of schedutil governor kthreads to the
affected CPUs if the cpufreq driver indicates that updates can
happen from any CPU (Christian Loehle)"
* tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Synchronize runtime PM status of parents and children
cpufreq: airoha: Depends on OF
PM: Revert "Add EXPORT macros for exporting PM functions"
PM: hibernate: Add error handling for syscore_suspend()
cpufreq/schedutil: Only bind threads if needed
cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()
cpufreq: CPPC: Fix wrong max_freq in policy initialization
cpufreq: Introduce a more generic way to set default per-policy boost flag
cpufreq: Fix re-boost issue after hotplugging a CPU
cpufreq: s3c64xx: Fix compilation warning
cpuidle: teo: Skip sleep length computation for low latency constraints
cpuidle: teo: Replace time_span_ns with a flag
cpuidle: teo: Simplify handling of total events count
cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
cpuidle: teo: Simplify counting events used for tick management
cpuidle: teo: Clarify two code comments
cpuidle: teo: Drop local variable prev_intercept_idx
cpuidle: teo: Combine candidate state index checks against 0
cpuidle: teo: Reorder candidate state index checks
cpuidle: teo: Rearrange idle state lookup code
|
|
|
Linus Torvalds
|
9c5968db9e |
The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec. - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones. - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest. - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code. - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups. - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code. - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c. - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator. - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading. - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated (https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/). Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED). - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled. - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL. - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests. - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size. - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic. - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated. - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated. - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed. - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic. - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy. - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic. - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions. - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed. - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting. - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface. - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior. - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi "introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors." - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram. - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal. - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance. - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation. - "Cleanup for memfd_create()" from Isaac Manjarres does that thing. - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration. - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices. - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE= =Ib2s -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ... |
|
Guo Weikang
|
c6f239796b |
mm/memblock: add memblock_alloc_or_panic interface
Before SLUB initialization, various subsystems used memblock_alloc to allocate memory. In most cases, when memory allocation fails, an immediate panic is required. To simplify this behavior and reduce repetitive checks, introduce `memblock_alloc_or_panic`. This function ensures that memory allocation failures result in a panic automatically, improving code readability and consistency across subsystems that require this behavior. [guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic] Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/ Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Wentao Liang
|
e20a70c572 |
PM: hibernate: Add error handling for syscore_suspend()
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes:
|
|
Rafael J. Wysocki
|
1225bb42b8 |
Merge branches 'pm-sleep', 'pm-cpuidle' and 'pm-em'
Merge updates related to system sleep, a cpuidle update and an Energy Model handling code update for 6.14-rc1: - Allow configuring the system suspend-resume (DPM) watchdog to warn earlier than panic (Douglas Anderson). - Implement devm_device_init_wakeup() helper and introduce a device- managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan). - Remove direct inclusions of 'pm_wakeup.h' which should be only included via 'device.h' (Wolfram Sang). - Clean up two comments in the core system-wide PM code (Rafael Wysocki, Randy Dunlap). - Add Clearwater Forest processor support to the intel_idle cpuidle driver (Artem Bityutskiy). - Move sched domains rebuild function from the schedutil cpufreq governor to the Energy Model handling code (Rafael Wysocki). * pm-sleep: PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq() PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic PM: sleep: convert comment from kernel-doc to plain comment PM: wakeup: implement devm_device_init_wakeup() helper PM: sleep: sysfs: don't include 'pm_wakeup.h' directly PM: sleep: autosleep: don't include 'pm_wakeup.h' directly PM: sleep: Update stale comment in device_resume() * pm-cpuidle: intel_idle: add Clearwater Forest SoC support * pm-em: PM: EM: Move sched domains rebuild function from schedutil to EM |
|
Douglas Anderson
|
56cabb937f |
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
Allow configuring the DPM watchdog to warn about slow suspend/resume functions without causing a system panic(). This allows you to set the DPM_WATCHDOG_WARNING_TIMEOUT to something like 5 or 10 seconds to get warnings about slow suspend/resume functions that eventually succeed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://patch.msgid.link/20250109125957.v2.1.I4554f931b8da97948f308ecc651b124338ee9603@changeid [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Randy Dunlap
|
96484d21ae |
PM: sleep: convert comment from kernel-doc to plain comment
Modify a non-kernel-doc comment to begin with /* instead of /** so that it does not cause a kernel-doc warning. power.h:114: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Auxiliary structure used for reading the snapshot image data and power.h:114: warning: missing initial short description on line: * Auxiliary structure used for reading the snapshot image data and Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Pavel Machek <pavel@ucw.cz> Link: https://patch.msgid.link/20250111063107.910825-1-rdunlap@infradead.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Rafael J. Wysocki
|
ebeeee390b |
PM: EM: Move sched domains rebuild function from schedutil to EM
Function sugov_eas_rebuild_sd() defined in the schedutil cpufreq governor implements generic functionality that may be useful in other places. In particular, there is a plan to use it in the intel_pstate driver in the future. For this reason, move it from schedutil to the energy model code and rename it to em_rebuild_sched_domains(). This also helps to get rid of some #ifdeffery in schedutil which is a plus. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> |
|
Wolfram Sang
|
d6482311ef |
PM: sleep: autosleep: don't include 'pm_wakeup.h' directly
The header clearly states that it does not want to be included directly, only via 'device.h'. 'platform_device.h' works equally well. Remove the direct inclusion. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://patch.msgid.link/20241118072917.3853-16-wsa+renesas@sang-engineering.com [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
9f16d5e6f2 |
The biggest change here is eliminating the awful idea that KVM had, of
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
Lukasz Luba
|
5609296750 |
PM: EM: Add min/max available performance state limits
On some devices there are HW dependencies for shared frequency and voltage between devices. It will impact Energy Aware Scheduler (EAS) decision, where CPUs share the voltage & frequency domain with other CPUs or devices e.g. - Mid CPUs + Big CPU - Little CPU + L3 cache in DSU - some other device + Little CPUs Detailed explanation of one example: When the L3 cache frequency is increased, the affected Little CPUs might run at higher voltage and frequency. That higher voltage causes higher CPU power and thus more energy is used for running the tasks. This is important for background running tasks, which try to run on energy efficient CPUs. Therefore, add performance state limits which are applied for the device (in this case CPU). This is important on SoCs with HW dependencies mentioned above so that the Energy Aware Scheduler (EAS) does not use performance states outside the valid min-max range for energy calculation. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20241030164126.1263793-2-lukasz.luba@arm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
David Woodhouse
|
3e251afaec |
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit
|
|
Al Viro
|
cb787f4ac0 |
[tree-wide] finally take no_llseek out
no_llseek had been defined to NULL two years ago, in commit
|
|
Andy Shevchenko
|
c3565a35d9 |
PM: hibernate: Remove unused stub for saveable_highmem_page()
When saveable_highmem_page() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
kernel/power/snapshot.c:1369:21: error: unused function 'saveable_highmem_page' [-Werror,-Wunused-function]
1369 | static inline void *saveable_highmem_page(struct zone *z, unsigned long p)
| ^~~~~~~~~~~~~~~~~~~~~
Fix this by removing unused stub.
See also commit
|
|
Xueqin Luo
|
a712f03fe8 |
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
As Documentation/filesystems/sysfs.rst suggested, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. No functional change intended. Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn> Link: https://patch.msgid.link/20240801083156.2513508-3-luoxueqin@kylinos.cn [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Xueqin Luo
|
6306653cd8 |
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
As Documentation/filesystems/sysfs.rst suggested, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. No functional change intended. Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn> Link: https://patch.msgid.link/20240801083156.2513508-2-luoxueqin@kylinos.cn Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Barry Song
|
54f7a49c20 |
mm: remove the implementation of swap_free() and always use swap_free_nr()
To streamline maintenance efforts, we propose removing the implementation of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set to 1. swap_free_nr() is designed with a bitmap consisting of only one long, resulting in overhead that can be ignored for cases where nr equals 1. A prime candidate for leveraging swap_free_nr() lies within kernel/power/swap.c. Implementing this change facilitates the adoption of batch processing for hibernation. Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Suggested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Gao Xiang <xiang@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Linus Torvalds
|
e4c07ec89e |
vfs-6.10-rc2.fixes
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZlRqlgAKCRCRxhvAZXjc os5tAQC6o3f2X39FooKv4bbbQkBXx5x8GqjUZyfnYjbm+Mak7wD/cf8tm4LLvVLt 1g7FbakWkEyQKhPRBMhtngX1GdKiuQI= =Isax -----END PGP SIGNATURE----- Merge tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix io_uring based write-through after converting cifs to use the netfs library - Fix aio error handling when doing write-through via netfs library - Fix performance regression in iomap when used with non-large folio mappings - Fix signalfd error code - Remove obsolete comment in signalfd code - Fix async request indication in netfs_perform_write() by raising BDP_ASYNC when IOCB_NOWAIT is set - Yield swap device immediately to prevent spurious EBUSY errors - Don't cross a .backup mountpoint from backup volumes in afs to avoid infinite loops - Fix a race between umount and async request completion in 9p after 9p was converted to use the netfs library * tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: netfs, 9p: Fix race between umount and async request completion afs: Don't cross .backup mountpoint from backup volume swap: yield device immediately netfs: Fix setting of BDP_ASYNC from iocb flags signalfd: drop an obsolete comment signalfd: fix error return code iomap: fault in smaller chunks for non-large folio mappings filemap: add helper mapping_max_folio_size() netfs: Fix AIO error handling when doing write-through netfs: Fix io_uring based write-through |
|
Christian Brauner
|
712182b67e |
swap: yield device immediately
Otherwise we can cause spurious EBUSY issues when trying to mount the rootfs later on. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218845 Reported-by: Petri Kaukasoina <petri.kaukasoina@tuni.fi> Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
Linus Torvalds
|
5ad8b6ad9a |
getting rid of bogus set_blocksize() uses, switching it
to struct file * and verifying that caller has device opened exclusively. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ 62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt KubxHVFsfW+eu6ASeaoMRB83w5OIzwk= =Liix -----END PGP SIGNATURE----- Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs blocksize updates from Al Viro: "This gets rid of bogus set_blocksize() uses, switches it over to be based on a 'struct file *' and verifies that the caller has the device opened exclusively" * tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make set_blocksize() fail unless block device is opened exclusive set_blocksize(): switch to passing struct file * btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens swsusp: don't bother with setting block size zram: don't bother with reopening - just use O_EXCL for open swapon(2): open swap with O_EXCL swapon(2)/swapoff(2): don't bother with block size pktcdvd: sort set_blocksize() calls out bcache_register(): don't bother with set_blocksize() |
|
|
Linus Torvalds
|
de6fef50ea |
cgroup: Changes for v6.10
- The locking around cpuset hotplug processing has always been a bit of mess
which was worked around by making hotplug processing asynchronous. The
asynchronity isn't great and led to other issues. We tried to make the
behavior synchronous a while ago but that led to lockdep splats. Waiman
took another stab at cleaning up and making it synchronous. The patch has
been in -next for well over a month and there haven't been any complaints,
so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZkUrFA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfTyAQCwd0aNQOqaKRhJGtWYShqV/aYzurCy1Z2tB9/3
dkdy9gD7BHNk6kZQEbT97RrHPIduFansLtc76VziACibWBuomgg=
=2DNQ
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- The locking around cpuset hotplug processing has always been a bit of
mess which was worked around by making hotplug processing
asynchronous. The asynchronity isn't great and led to other issues.
We tried to make the behavior synchronous a while ago but that led to
lockdep splats. Waiman took another stab at cleaning up and making it
synchronous. The patch has been in -next for well over a month and
there haven't been any complaints, so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
selftests/cgroup: Drop define _GNU_SOURCE
docs: cgroup-v1: Update page cache removal functions
selftests/cgroup: fix uninitialized variables in test_zswap.c
selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
selftests/cgroup: fix clang warnings: uninitialized fd variable
selftests/cgroup: fix clang build failures for abs() calls
cgroup/cpuset: Remove outdated comment in sched_partition_write()
cgroup/cpuset: Fix incorrect top_cpuset flags
cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
cgroup/cpuset: Statically initialize more members of top_cpuset
cgroup: Avoid unnecessary looping in cgroup_no_v1()
cgroup, legacy_freezer: update comment for freezer_css_offline()
docs, cgroup: add entries for pids to cgroup-v2.rst
cgroup: don't call cgroup1_pidlist_destroy_all() for v2
cgroup_freezer: update comment for freezer_css_online()
cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
cgroup/pids: Remove superfluous zeroing
docs: cgroup-v1: Fix description for css_online
...
|
|
|
Rafael J. Wysocki
|
de1c2722e0 |
Merge branches 'pm-em' and 'pm-docs'
Merge Enery Model update and a power management documentation update for 6.10: - Make the Samsung exynos-asv driver update the Energy Model after adjusting voltage on top of some preliminary changes of the OPP and Enery Model generic code (Lukasz Luba). - Remove a reference to a function that has been dropped from the power management documentation (Bjorn Helgaas). * pm-em: soc: samsung: exynos-asv: Update Energy Model after adjusting voltage PM: EM: Add em_dev_update_chip_binning() PM: EM: Refactor em_adjust_new_capacity() OPP: OF: Export dev_opp_pm_calc_power() for usage from EM * pm-docs: Documentation: PM: Update platform_pci_wakeup_init() reference |
|
|
Al Viro
|
b1439b179d |
swsusp: don't bother with setting block size
same as with the swap... Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
Justin Stitt
|
7b831bd3cf |
PM: hibernate: replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This kernel config option is simply assigned with the resume_file
buffer. It should be NUL-terminated but not necessarily NUL-padded as
per its further usage with other string apis:
| static int __init find_resume_device(void)
| {
| if (!strlen(resume_file))
| return -ENOENT;
|
| pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
Use strscpy() [2] as it guarantees NUL-termination on the destination
buffer. Specifically, use the new 2-argument version of strscpy()
introduced in Commit
|
|
Waiman Long
|
2125c0034c |
cgroup/cpuset: Make cpuset hotplug processing synchronous
Since commit 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside
get_online_cpus()"), cpuset hotplug was done asynchronously via a work
function. This is to avoid recursive locking of cgroup_mutex.
Since then, the cgroup locking scheme has changed quite a bit. A
cpuset_mutex was introduced to protect cpuset specific operations.
The cpuset_mutex is then replaced by a cpuset_rwsem. With commit
|
|
|
Lukasz Luba
|
cf61d53b02 |
PM: EM: Add em_dev_update_chip_binning()
Add a function which allows to modify easily the EM after the new voltage information is available. The device drivers for the chip can adjust the voltage values after setup. The voltage for the same frequency in OPP can be different due to chip binning. The voltage impacts the power usage and the EM power values can be updated to reflect that. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
d61c2695bd |
PM: EM: Refactor em_adjust_new_capacity()
Extract em_table_dup() and em_recalc_and_update() from em_adjust_new_capacity(). Both functions will be later reused by the 'update EM due to chip binning' functionality. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Anna-Maria Behnsen
|
3c89a068bf |
PM: s2idle: Make sure CPUs will wakeup directly on resume
s2idle works like a regular suspend with freezing processes and freezing devices. All CPUs except the control CPU go into idle. Once this is completed the control CPU kicks all other CPUs out of idle, so that they reenter the idle loop and then enter s2idle state. The control CPU then issues an swait() on the suspend state and therefore enters the idle loop as well. Due to being kicked out of idle, the other CPUs leave their NOHZ states, which means the tick is active and the corresponding hrtimer is programmed to the next jiffie. On entering s2idle the CPUs shut down their local clockevent device to prevent wakeups. The last CPU which enters s2idle shuts down its local clockevent and freezes timekeeping. On resume, one of the CPUs receives the wakeup interrupt, unfreezes timekeeping and its local clockevent and starts the resume process. At that point all other CPUs are still in s2idle with their clockevents switched off. They only resume when they are kicked by another CPU or after resuming devices and then receiving a device interrupt. That means there is no guarantee that all CPUs will wakeup directly on resume. As a consequence there is no guarantee that timers which are queued on those CPUs and should expire directly after resume, are handled. Also timer list timers which are remotely queued to one of those CPUs after resume will not result in a reprogramming IPI as the tick is active. Queueing a hrtimer will also not result in a reprogramming IPI because the first hrtimer event is already in the past. The recent introduction of the timer pull model ( |
|
|
Linus Torvalds
|
3faae16b5a |
RTC for 6.9
Subsytem: - rtc_class is now const Drivers: - ds1511: driver cleanup, set date and time range and alarm offset limit - max31335: fix interrupt handler - pcf8523: improve suspend support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmX8uCcACgkQY6TcMGxw OjI1hA//fK1Cs2eDL2E7e8bQCJtDJ+gdzVT210LwT9TCOgUV+arqLjF/i/pq8m5j CK/ukk5OLZL3v5dS7rsOZAiTg1N9Q+3SEoaTP029kRfA2SxOE2isR9W5nNAvyJC0 L4Y4YEcEMsJpluK94G1/4ult1We9vCGSlqlNknChp3BL5ELxg7T/Ea5wda2OLSRx +ZgQpB6O+LIIQucm8mgCAlucMJrAj4+qEF7HO0AeElDh+md4OvjrF8Y30vTfs82L hGazWQgu8J4Jmy4u6q00s5IhfsvwNZVYgaASv8ivB8/9qgQLktZ6HFHRSwloRXg2 o9OqcM/OR7Lw4taH/6pnVQ37UUAQ/Vy9QJy2GHza1uDzlBBjtqVz8zFqheu/rmnJ 3AX7hlowBx9fPpxmStP2Ac9WIvtepV25eOlDDSlDiS8/4T/DRJHwpRQghSTDnFJ4 fRU1HFbaj3ZKRgBzu5zJU4XvQO4X/DKxSHVMy+rVtsndWzDa8q11QZrQJAP4ZpLM /+zfar2RFnsnop1Dg9cz/hq0gWbQUMJ16qN3cFYl3jVVzC3JSld7B0+DhZdII1Lg YsCXuUQusnOTFm9GtyC6doHgmC3Dy2wentz6Vn6ynyBOR4NKjJPkI7PICdgzkIDi AJI9qSxQcT6gOSw2PAlzOcYb7AD3cOJCeg3ukt7aDl8S38RKR3w= =Is7n -----END PGP SIGNATURE----- Merge tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsytem: - rtc_class is now const Drivers: - ds1511: cleanup, set date and time range and alarm offset limit - max31335: fix interrupt handler - pcf8523: improve suspend support" * tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits) MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs rtc: class: make rtc_class constant dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER rtc: nct3018y: fix possible NULL dereference rtc: max31335: fix interrupt status reg rtc: mt6397: select IRQ_DOMAIN instead of depending on it dt-bindings: rtc: abx80x: convert to yaml rtc: m41t80: Use the unified property API get the wakeup-source property dt-bindings: at91rm9260-rtt: add sam9x7 compatible dt-bindings: rtc: convert MT7622 RTC to the json-schema dt-bindings: rtc: convert MT2717 RTC to the json-schema rtc: pcf8523: add suspend handlers for alarm IRQ rtc: ds1511: set alarm offset limit rtc: ds1511: set range rtc: ds1511: drop inline/noinline hints rtc: ds1511: rename pdata rtc: ds1511: implement ds1511_rtc_read_alarm properly rtc: ds1511: remove partial alarm support ... |
|
|
Lukasz Luba
|
3acec69a94 |
PM: EM: Force device drivers to provide power in uW
The EM only supports power in uW. Make sure that it is not possible to register some downstream driver which doesn't provide power in uW. The only exception is artificial EM, but that EM is ignored by the rest of kernel frameworks (thermal, powercap, etc). Reported-by: PoShao Chen <poshao.chen@mediatek.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
07abb19a9b |
Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
|
Rafael J. Wysocki
|
3bd834640b |
Merge branch 'pm-em'
Merge Enery Model changes for 6.9-rc1: - Allow the Energy Model to be updated dynamically (Lukasz Luba). * pm-em: (24 commits) PM: EM: Fix nr_states warnings in static checks Documentation: EM: Update with runtime modification design PM: EM: Add em_dev_compute_costs() PM: EM: Remove old table PM: EM: Change debugfs configuration to use runtime EM table data drivers/thermal/devfreq_cooling: Use new Energy Model interface drivers/thermal/cpufreq_cooling: Use new Energy Model interface powercap/dtpm_devfreq: Use new Energy Model interface to get table powercap/dtpm_cpu: Use new Energy Model interface to get table PM: EM: Optimize em_cpu_energy() and remove division PM: EM: Support late CPUs booting and capacity adjustment PM: EM: Add performance field to struct em_perf_state and optimize PM: EM: Add em_perf_state_from_pd() to get performance states table PM: EM: Introduce em_dev_update_perf_domain() for EM updates PM: EM: Add functions for memory allocations for new EM tables PM: EM: Use runtime modified EM for CPUs energy estimation in EAS PM: EM: Introduce runtime modifiable table PM: EM: Split the allocation and initialization of the EM table PM: EM: Check if the get_cost() callback is present in em_compute_costs() PM: EM: Introduce em_compute_costs() ... |
|
Ricardo B. Marliere
|
6b6ca09611 |
rtc: class: make rtc_class constant
Since commit
|
|
Maulik Shah
|
9bc4ffd32e |
PM: suspend: Set mem_sleep_current during kernel command line setup
psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.
Set mem_sleep_current along with mem_sleep_default during kernel command
line setup as default suspend mode.
Fixes:
|
|
|
Christian Brauner
|
4379f91172
|
power: port block device access to file
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-6-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
Lukasz Luba
|
3a561ea241 |
PM: EM: Fix nr_states warnings in static checks
During the static checks nr_states has been mentioned by the kernel test robot. Fix the warning in those 2 places. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Christophe Leroy
|
f4311756a8 |
PM: hibernate: Don't ignore return from set_memory_ro()
set_memory_ro() and set_memory_rw() can fail, leaving memory unprotected. Take the returned value into account and abort in case of failure. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
Nikhil V
|
3fec6e5961 |
PM: hibernate: Support to select compression algorithm
Currently the default compression algorithm is selected based on
compile time options. Introduce a module parameter "hibernate.compressor"
to override this behaviour.
Different compression algorithms have different characteristics and
hibernation may benefit when it uses any of these algorithms, especially
when a secondary algorithm(LZ4) offers better decompression speeds over
a default algorithm(LZO), which in turn reduces hibernation image
restore time.
Users can override the default algorithm in two ways:
1) Passing "hibernate.compressor" as kernel command line parameter.
Usage:
LZO: hibernate.compressor=lzo
LZ4: hibernate.compressor=lz4
2) Specifying the algorithm at runtime.
Usage:
LZO: echo lzo > /sys/module/hibernate/parameters/compressor
LZ4: echo lz4 > /sys/module/hibernate/parameters/compressor
Currently LZO and LZ4 are the supported algorithms. LZO is the default
compression algorithm used with hibernation.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
Lukasz Luba
|
22ea02848c |
PM: EM: Add em_dev_compute_costs()
The device drivers can modify EM at runtime by providing a new EM table. The EM is used by the EAS and the em_perf_state::cost stores pre-calculated value to avoid overhead. This patch provides the API for device drivers to calculate the cost values properly (and not duplicate the same code). Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
24e9fb635d |
PM: EM: Remove old table
Remove the old EM table which wasn't able to modify the data. Clean the unneeded function and refactor the code a bit. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
09417e673c |
PM: EM: Change debugfs configuration to use runtime EM table data
Dump the runtime EM table values which can be modified in time. In order to do that allocate chunk of debug memory which can be later freed automatically thanks to devm_kcalloc(). This design can handle the fact that the EM table memory can change after EM update, so debug code cannot use the pointer from initialization phase. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
1b600da510 |
PM: EM: Optimize em_cpu_energy() and remove division
The Energy Model (EM) can be modified at runtime which brings new possibilities. The em_cpu_energy() is called by the Energy Aware Scheduler (EAS) in its hot path. The energy calculation uses power value for a given performance state (ps) and the CPU busy time as percentage for that given frequency. It is possible to avoid the division by 'scale_cpu' at runtime, because EM is updated whenever new max capacity CPU is set in the system. Use that feature and do the needed division during the calculation of the coefficient 'ps->cost'. That enhanced 'ps->cost' value can be then just multiplied simply by utilization: pd_nrg = ps->cost * \Sum cpu_util to get the needed energy for whole Performance Domain (PD). With this optimization and earlier removal of map_util_freq(), the em_cpu_energy() should run faster on the Big CPU by 1.43x and on the Little CPU by 1.69x (RockPi 4B board). Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
e3f1164fc9 |
PM: EM: Support late CPUs booting and capacity adjustment
The patch adds needed infrastructure to handle the late CPUs boot, which might change the previous CPUs capacity values. With this changes the new CPUs which try to register EM will trigger the needed re-calculations for other CPUs EMs. Thanks to that the em_per_state::performance values will be aligned with the CPU capacity information after all CPUs finish the boot and EM registrations. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
5a367f7b70 |
PM: EM: Add performance field to struct em_perf_state and optimize
The performance doesn't scale linearly with the frequency. Also, it may be different in different workloads. Some CPUs are designed to be particularly good at some applications e.g. images or video processing and other CPUs in different. When those different types of CPUs are combined in one SoC they should be properly modeled to get max of the HW in Energy Aware Scheduler (EAS). The Energy Model (EM) provides the power vs. performance curves to the EAS, but assumes the CPUs capacity is fixed and scales linearly with the frequency. This patch allows to adjust the curve on the 'performance' axis as well. Code speed optimization: Removing map_util_freq() allows to avoid one division and one multiplication operations from the EAS hot code path. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
977230d5d5 |
PM: EM: Introduce em_dev_update_perf_domain() for EM updates
Add API function em_dev_update_perf_domain() which allows the EM to be changed safely. Concurrent updaters are serialized with a mutex and the removal of memory that will not be used any more is carried out with the help of RCU. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
ffcf9bce7a |
PM: EM: Add functions for memory allocations for new EM tables
The runtime modified EM table can be provided from drivers. Create mechanism which allows safely allocate and free the table for device drivers. The same table can be used by the EAS in task scheduler code paths, so make sure the memory is not freed when the device driver module is unloaded. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
ca0fc871f1 |
PM: EM: Introduce runtime modifiable table
The new runtime table can be populated with a new power data to better reflect the actual efficiency of the device e.g. CPU. The power can vary over time e.g. due to the SoC temperature change. Higher temperature can increase power values. For longer running scenarios, such as game or camera, when also other devices are used (e.g. GPU, ISP) the CPU power can change. The new EM framework is able to addresses this issue and change the EM data at runtime safely. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
8552d68201 |
PM: EM: Split the allocation and initialization of the EM table
Split the process of allocation and data initialization for the EM table. The upcoming changes for modifiable EM will use it. This change is not expected to alter the general functionality. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
818867224d |
PM: EM: Check if the get_cost() callback is present in em_compute_costs()
Subsequent changes will introduce a case in which 'cb->get_cost' may not be set in em_compute_costs(), so add a check to ensure that it is not NULL before attempting to dereference it. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukasz Luba
|
faf7075b79 |
PM: EM: Introduce em_compute_costs()
Move the EM costs computation code into a new dedicated function, em_compute_costs(), that can be reused in other places in the future. This change is not expected to alter the general functionality. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |