mirror of https://github.com/torvalds/linux.git
83 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
0c02183427 |
ARM:
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
Eric DeVolder
|
543cd4c5e7 |
x86/crash: optimize CPU changes
crash_prepare_elf64_headers() writes into the elfcorehdr an ELF PT_NOTE for all possible CPUs. As such, subsequent changes to CPUs (ie. hot un/plug, online/offline) do not need to rewrite the elfcorehdr. The kimage->file_mode term covers kdump images loaded via the kexec_file_load() syscall. Since crash_prepare_elf64_headers() wrote the initial elfcorehdr, no update to the elfcorehdr is needed for CPU changes. The kimage->elfcorehdr_updated term covers kdump images loaded via the kexec_load() syscall. At least one memory or CPU change must occur to cause crash_prepare_elf64_headers() to rewrite the elfcorehdr. Afterwards, no update to the elfcorehdr is needed for CPU changes. This code is intentionally *NOT* hoisted into crash_handle_hotplug_event() as it would prevent the arch-specific handler from running for CPU changes. This would break PPC, for example, which needs to update other information besides the elfcorehdr, on CPU changes. Link: https://lkml.kernel.org/r/20230814214446.6659-9-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Eric DeVolder
|
a72bbec70d |
crash: hotplug support for kexec_load()
The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.
Given a kdump capture kernel loaded via kexec_load(), and a subsequent
hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites
it to reflect the hotplug change. That is the desired outcome, however,
at kernel panic time, the purgatory integrity check fails (because the
elfcorehdr changed), and the capture kernel does not boot and no vmcore is
generated.
Therefore, the userspace kexec-tools/kexec must indicate to the kernel
that the elfcorehdr can be modified (because the kexec excluded the
elfcorehdr from the digest, and sized the elfcorehdr memory buffer
appropriately).
To facilitate hotplug support with kexec_load():
- a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is
safe for the kernel to modify the kexec_load()'d elfcorehdr
- the /sys/kernel/crash_elfcorehdr_size node communicates the
preferred size of the elfcorehdr memory buffer
- The sysfs crash_hotplug nodes (ie.
/sys/devices/system/[cpu|memory]/crash_hotplug) dynamically
take into account kexec_file_load() vs kexec_load() and
KEXEC_UPDATE_ELFCOREHDR.
This is critical so that the udev rule processing of crash_hotplug
is all that is needed to determine if the userspace unload-then-load
of the kdump image is to be skipped, or not. The proposed udev
rule change looks like:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
The table below indicates the behavior of kexec_load()'d kdump image
updates (with the new udev crash_hotplug rule in place):
Kernel |Kexec
-------+-----+----
Old |Old |New
| a | a
-------+-----+----
New | a | b
-------+-----+----
where kexec 'old' and 'new' delineate kexec-tools has the needed
modifications for the crash hotplug feature, and kernel 'old' and 'new'
delineate the kernel supports this crash hotplug feature.
Behavior 'a' indicates the unload-then-reload of the entire kdump image.
For the kexec 'old' column, the unload-then-reload occurs due to the
missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec)
does not present the crash_hotplug sysfs node, which leads to the
unload-then-reload of the kdump image.
Behavior 'b' indicates the desired optimized behavior of the kernel
directly modifying the elfcorehdr and avoiding the unload-then-reload of
the kdump image.
If the udev rule is not updated with crash_hotplug node check, then no
matter any combination of kernel or kexec is new or old, the kdump image
continues to be unload-then-reload on hotplug changes.
To fully support crash hotplug feature, there needs to be a rollout of
kernel, kexec-tools and udev rule changes. However, the order of the
rollout of these pieces does not matter; kexec_load()'d kdump images still
function for hotplug as-is.
Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Suggested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
Eric DeVolder
|
ea53ad9cf7 |
x86/crash: add x86 crash hotplug support
When CPU or memory is hot un/plugged, or off/onlined, the crash elfcorehdr, which describes the CPUs and memory in the system, must also be updated. A new elfcorehdr is generated from the available CPUs and memory and replaces the existing elfcorehdr. The segment containing the elfcorehdr is identified at run-time in crash_core:crash_handle_hotplug_event(). No modifications to purgatory (see 'kexec: exclude elfcorehdr from the segment digest') or boot_params (as the elfcorehdr= capture kernel command line parameter pointer remains unchanged and correct) are needed, just elfcorehdr. For kexec_file_load(), the elfcorehdr segment size is based on NR_CPUS and CRASH_MAX_MEMORY_RANGES in order to accommodate a growing number of CPU and memory resources. For kexec_load(), the userspace kexec utility needs to size the elfcorehdr segment in the same/similar manner. To accommodate kexec_load() syscall in the absence of kexec_file_load() syscall support, prepare_elf_headers() and dependents are moved outside of CONFIG_KEXEC_FILE. [eric.devolder@oracle.com: correct unused function build error] Link: https://lkml.kernel.org/r/20230821182644.2143-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-6-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Sean Christopherson
|
b23c83ad2c |
x86/reboot: VMCLEAR active VMCSes before emergency reboot
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel may kexec into a new kernel after a crash. Per Intel's SDM, the VMX architecture doesn't require the CPU to flush the VMCS cache on INIT. If an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically be kept and only be written back to memory after the new kernel is booted, i.e. could effectively corrupt memory after reboot. Opportunistically remove the setting of the global pointer to NULL to make checkpatch happy. Cc: Andrew Cooper <Andrew.Cooper3@citrix.com> Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Sean Christopherson
|
26044aff37 |
x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
Disable virtualization in crash_nmi_callback() and rework the emergency_vmx_disable_all() path to do an NMI shootdown if and only if a shootdown has not already occurred. NMI crash shootdown fundamentally can't support multiple invocations as responding CPUs are deliberately put into halt state without unblocking NMIs. But, the emergency reboot path doesn't have any work of its own, it simply cares about disabling virtualization, i.e. so long as a shootdown occurred, emergency reboot doesn't care who initiated the shootdown, or when. If "crash_kexec_post_notifiers" is specified on the kernel command line, panic() will invoke crash_smp_send_stop() and result in a second call to nmi_shootdown_cpus() during native_machine_emergency_restart(). Invoke the callback _before_ disabling virtualization, as the current VMCS needs to be cleared before doing VMXOFF. Note, this results in a subtle change in ordering between disabling virtualization and stopping Intel PT on the responding CPUs. While VMX and Intel PT do interact, VMXOFF and writes to MSR_IA32_RTIT_CTL do not induce faults between one another, which is all that matters when panicking. Harden nmi_shootdown_cpus() against multiple invocations to try and capture any such kernel bugs via a WARN instead of hanging the system during a crash/dump, e.g. prior to the recent hardening of register_nmi_handler(), re-registering the NMI handler would trigger a double list_add() and hang the system if CONFIG_BUG_ON_DATA_CORRUPTION=y. list_add double add: new=ffffffff82220800, prev=ffffffff8221cfe8, next=ffffffff82220800. WARNING: CPU: 2 PID: 1319 at lib/list_debug.c:29 __list_add_valid+0x67/0x70 Call Trace: __register_nmi_handler+0xcf/0x130 nmi_shootdown_cpus+0x39/0x90 native_machine_emergency_restart+0x1c9/0x1d0 panic+0x237/0x29b Extract the disabling logic to a common helper to deduplicate code, and to prepare for doing the shootdown in the emergency reboot path if SVM is supported. Note, prior to commit |
|
Takashi Iwai
|
d00dd2f264 |
x86/kexec: Fix double-free of elf header buffer
After |
|
|
Eric DeVolder
|
b57a7c9dd7 |
x86/crash: Fix minor typo/bug in debug message
The pr_debug() intends to display the memsz member, but the parameter is actually the bufsz member (which is already displayed). Correct this to display memsz value. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220413164237.20845-2-eric.devolder@oracle.com |
|
Mike Rapoport
|
23721c8e92 |
x86/crash: Remove crash_reserve_low_1M()
The entire memory range under 1M is unconditionally reserved in setup_arch(), so there is no need for crash_reserve_low_1M() anymore. Remove this function. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210601075354.5149-4-rppt@kernel.org |
|
|
Linus Torvalds
|
0080665fbd |
Devicetree updates for v5.13:
- Refactoring powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmCIYdgQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw/PKEACkOCWDnLSY9U7w1uGDHr6UgXIWOY9j8bYy 2pTvDrVa6KZphT6yGU/hxrOk8Mqh5AMd2vUhO2OCoyyl/priTv+Ktqo+bikvJZLa MQm3JnrLpPy/GetdmVD8wq1l+FoeOSTnRIJqRxInsd8UFVpZImtP22ELox6KgGiv keVHIrjsHU/HpafK3w8wHCLikCZk+1Gl6pL/QgFDv2FaaCTKW16Dt64dPqYm49Xk j7YMMQWl+3NJ9ywZV0+PMbl9udi3EjGm5Ap5VfKzpj53Nh07QObg/QtH/1sj0HPo apyW7jAyQFyLytbjxzFL/tljtOeW/5rZos1GWThZ326e+Y0mTKUTDZShvNplfjIf e26FvVi7gndWlRSr30Ia5gdNFAx72IkpJUAuypBXgb+qNPchBJjAXLn9tcIcg/k+ 2R6BIB7SkVLpgTnJ1Bq1+PRqkKM+ggACdJNJIUApj44xoiG01vtGDGRaFuIio+Ch HT4aBbic4kLvagm8VzuiIF/sL7af5pntzArcyOfQTaZ92DyGI2C0j90rK3yPRIYM u9qX/24t1SXiUji74QpoQFzt/+Egy5hYXMJOJJSywUjKf7DBhehqklTjiJRQHKm6 0DJ/n8q4lNru8F0Y4keKSuYTfHBstF7fS3UTH/rUmBAbfEwkvZe6B29KQbs+7aph GTw+jeoR5Q== =rF27 -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties * tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) powerpc: If kexec_build_elf_info() fails return immediately from elf64_load() powerpc: Free fdt on error in elf64_load() of: overlay: Fix kerneldoc warning in of_overlay_remove() of: linux/of.h: fix kernel-doc warnings of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses dt-bindings: bcm4329-fmac: add optional brcm,ccode-map docs: dt: update writing-schema.rst references dt-bindings: media: venus: Add sm8250 dt schema of: base: Fix spelling issue with function param 'prop' docs: dt: Add DT API documentation of: Add missing 'Return' section in kerneldoc comments of: Fix kerneldoc output formatting docs: dt: Group DT docs into relevant sub-sections docs: dt: Make 'Devicetree' wording more consistent docs: dt: writing-schema: Include the example schema in the doc build docs: dt: writing-schema: Remove spurious indentation dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3 dt-bindings: media: video-interfaces: Drop the example devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt ... |
|
Mike Galbraith
|
5849cdf8c1 |
x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
Commit in Fixes: added support for kexec-ing a kernel on panic using a
new system call. As part of it, it does prepare a memory map for the new
kernel.
However, while doing so, it wrongly accesses memory it has not
allocated: it accesses the first element of the cmem->ranges[] array in
memmap_exclude_ranges() but it has not allocated the memory for it in
crash_setup_memmap_entries(). As KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0
Write of size 8 at addr ffffc90000426008 by task kexec/1187
(gdb) list *crash_setup_memmap_entries+0x17e
0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322).
317 unsigned long long mend)
318 {
319 unsigned long start, end;
320
321 cmem->ranges[0].start = mstart;
322 cmem->ranges[0].end = mend;
323 cmem->nr_ranges = 1;
324
325 /* Exclude elf header region */
326 start = image->arch.elf_load_addr;
(gdb)
Make sure the ranges array becomes a single element allocated.
[ bp: Write a proper commit message. ]
Fixes:
|
|
Lakshmi Ramasubramanian
|
179350f00e |
x86: Use ELF fields defined in 'struct kimage'
ELF related fields elf_headers, elf_headers_sz, and elf_load_addr have been moved from 'struct kimage_arch' to 'struct kimage'. Use the ELF fields defined in 'struct kimage'. Suggested-by: Rob Herring <robh@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210221174930.27324-5-nramas@linux.microsoft.com |
|
Lianbo Jiang
|
a3e1c3bb24 |
x86/crash: Correct the address boundary of function parameters
Let's carefully handle the boundary of the function parameter to make sure that the arguments passed doesn't exceed the address range. Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Young <dyoung@redhat.com> Link: https://lore.kernel.org/r/20200804044933.1973-2-lijiang@redhat.com |
|
Julia Lawall
|
1429b568ad |
x86/crash: Use resource_size()
Use resource_size() rather than a verbose computation on the end and start fields. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ struct resource ptr; @@ - (ptr.end - ptr.start + 1) + resource_size(&ptr) </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/1577900990-8588-10-git-send-email-Julia.Lawall@inria.fr |
|
Borislav Petkov
|
9eff303725 |
x86/crash: Align function arguments on opening braces
... or let function calls stick out and thus remain on a single line, even if the 80 cols rule is violated by a couple of chars, for better readability. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: x86@kernel.org Link: https://lkml.kernel.org/r/20191114172200.19563-1-bp@alien8.de |
|
|
Lianbo Jiang
|
7c321eb2b8 |
x86/kdump: Remove the backup region handling
When the crashkernel kernel command line option is specified, the low 1M memory will always be reserved now. Therefore, it's not necessary to create a backup region anymore and also no need to copy the contents of the first 640k to it. Remove all the code related to handling that backup region. [ bp: Massage commit message. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: Dave Young <dyoung@redhat.com> Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-3-lijiang@redhat.com |
|
|
Lianbo Jiang
|
6f599d8423 |
x86/kdump: Always reserve the low 1M when the crashkernel option is specified
On x86, purgatory() copies the first 640K of memory to a backup region because the kernel needs those first 640K for the real mode trampoline during boot, among others. However, when SME is enabled, the kernel cannot properly copy the old memory to the backup area but reads only its encrypted contents. The result is that the crash tool gets invalid pointers when parsing vmcore: crash> kmem -s|grep -i invalid kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4 kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4 crash> So reserve the remaining low 1M memory when the crashkernel option is specified (after reserving real mode memory) so that allocated memory does not fall into the low 1M area and thus the copying of the contents of the first 640k to a backup region in purgatory() can be avoided altogether. This way, it does not need to be included in crash dumps or used for anything except the trampolines that must live in the low 1M. [ bp: Heavily rewrite commit message, flip check logic in crash_reserve_low_1M().] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: Dave Young <dyoung@redhat.com> Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-2-lijiang@redhat.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=204793 |
|
Nikolas Nyby
|
4599c6671b |
x86/crash: Remove unnecessary comparison
The ret comparison and return are unnecessary as of commit
|
|
|
Linus Torvalds
|
565eb5f8c5 |
Merge branch 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x865 kdump updates from Thomas Gleixner:
"Yet more kexec/kdump updates:
- Properly support kexec when AMD's memory encryption (SME) is
enabled
- Pass reserved e820 ranges to the kexec kernel so both PCI and SME
can work"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active
x86/kexec: Set the C-bit in the identity map page table when SEV is active
x86/kexec: Do not map kexec area as decrypted when SEV is active
x86/crash: Add e820 reserved ranges to kdump kernel's e820 table
x86/mm: Rework ioremap resource mapping determination
x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED
x86/mm: Create a workarea in the kernel for SME early encryption
x86/mm: Identify the end of the kernel area to be reserved
|
|
|
Linus Torvalds
|
5b7a209523 |
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Misc small cleanups: removal of superfluous code and coding style cleanups mostly" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Make variable static and config dependent x86/defconfigs: Remove useless UEVENT_HELPER_PATH x86/amd_nb: Make hygon_nb_misc_ids static x86/tsc: Move inline keyword to the beginning of function declarations x86/io_delay: Define IO_DELAY macros in C instead of Kconfig x86/io_delay: Break instead of fallthrough in switch statement |
|
Tiezhu Yang
|
53b7607382 |
x86/kexec: Make variable static and config dependent
The following sparse warning is emitted:
arch/x86/kernel/crash.c:59:15:
warning: symbol 'crash_zero_bytes' was not declared. Should it be static?
The variable is only used in this compilation unit, but it is also only
used when CONFIG_KEXEC_FILE is enabled. Just making it static would result
in a 'defined but not used' warning for CONFIG_KEXEC_FILE=n.
Make it static and move it into the existing CONFIG_KEXEC_FILE section.
[ tglx: Massaged changelog and moved it into the existing ifdef ]
Fixes:
|
|
Peter Zijlstra
|
3c88c692c2 |
x86/stackframe/32: Provide consistent pt_regs
Currently pt_regs on x86_32 has an oddity in that kernel regs (!user_mode(regs)) are short two entries (esp/ss). This means that any code trying to use them (typically: regs->sp) needs to jump through some unfortunate hoops. Change the entry code to fix this up and create a full pt_regs frame. This then simplifies various trampolines in ftrace and kprobes, the stack unwinder, ptrace, kdump and kgdb. Much thanks to Josh for help with the cleanups! Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Lianbo Jiang
|
980621daf3 |
x86/crash: Add e820 reserved ranges to kdump kernel's e820 table
At present, when using the kexec_file_load() syscall to load the kernel image and initramfs, for example: kexec -s -p xxx the kernel does not pass the e820 reserved ranges to the second kernel, which might cause two problems: 1. MMCONFIG: A device in PCI segment 1 cannot be discovered by the kernel PCI probing without all the e820 I/O reservations being present in the e820 table. Which is the case currently, because the kdump kernel does not have those reservations because the kexec command does not pass the I/O reservation via the "memmap=xxx" command line option. Further details courtesy of Bjorn Helgaas¹: I think you should regard correct MCFG/ECAM usage in the kdump kernel as a requirement. MMCONFIG (aka ECAM) space is described in the ACPI MCFG table. If you don't have ECAM: (a) PCI devices won't work at all on non-x86 systems that use only ECAM for config access, (b) you won't be able to access devices on non-0 segments (granted, there aren't very many of these yet, but there will be more in the future), and (c) you won't be able to access extended config space (addresses 0x100-0xfff), which means none of the Extended Capabilities will be available (AER, ACS, ATS, etc). 2. The second issue is that the SME kdump kernel doesn't work without the e820 reserved ranges. When SME is active in the kdump kernel, those reserved regions are still decrypted, but because those reserved ranges are not present at all in kdump kernel's e820 table, they are accessed as encrypted. Which is obviously wrong. [1]: https://lkml.kernel.org/r/CABhMZUUscS3jUZUSM5Y6EYJK6weo7Mjj5-EAKGvbw0qEe%2B38zw@mail.gmail.com [ bp: Heavily massage commit message. ] Suggested-by: Dave Young <dyoung@redhat.com> Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Baoquan He <bhe@redhat.com> Cc: Bjorn Helgaas <bjorn.helgaas@gmail.com> Cc: dave.hansen@linux.intel.com Cc: Dave Young <dyoung@redhat.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: kexec@lists.infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Cc: Yi Wang <wang.yi59@zte.com.cn> Link: https://lkml.kernel.org/r/20190423013007.17838-4-lijiang@redhat.com |
|
Thomas Gleixner
|
457c899653 |
treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
Gustavo A. R. Silva
|
4df4309587 |
x86/kexec/crash: Use struct_size() in vzalloc()
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = vzalloc(sizeof(struct foo) + count * sizeof(struct boo));
Instead of leaving these open-coded and prone to type mistakes, use the new
struct_size() helper:
instance = vzalloc(struct_size(instance, entry, count));
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190403184230.GA5295@embeddedor
|
|
Dave Young
|
993a110319 |
x86/kexec: Fix a kexec_file_load() failure
Commit |
|
Yi Wang
|
89f579ce99 |
x86/headers: Fix -Wmissing-prototypes warning
When building the kernel with W=1 we get a lot of -Wmissing-prototypes warnings, which are trivial in nature and easy to fix - and which may mask some real future bugs if the prototypes get out of sync with the function definition. This patch fixes most of -Wmissing-prototypes warnings which are in the root directory of arch/x86/kernel, not including the subdirectories. These are the warnings fixed in this patch: arch/x86/kernel/signal.c:865:17: warning: no previous prototype for ‘sys32_x32_rt_sigreturn’ [-Wmissing-prototypes] arch/x86/kernel/signal_compat.c:164:6: warning: no previous prototype for ‘sigaction_compat_abi’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:625:46: warning: no previous prototype for ‘sync_regs’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:640:24: warning: no previous prototype for ‘fixup_bad_iret’ [-Wmissing-prototypes] arch/x86/kernel/traps.c:929:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:270:28: warning: no previous prototype for ‘smp_x86_platform_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:301:16: warning: no previous prototype for ‘smp_kvm_posted_intr_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:314:16: warning: no previous prototype for ‘smp_kvm_posted_intr_wakeup_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq.c:328:16: warning: no previous prototype for ‘smp_kvm_posted_intr_nested_ipi’ [-Wmissing-prototypes] arch/x86/kernel/irq_work.c:16:28: warning: no previous prototype for ‘smp_irq_work_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/irqinit.c:79:13: warning: no previous prototype for ‘init_IRQ’ [-Wmissing-prototypes] arch/x86/kernel/quirks.c:672:13: warning: no previous prototype for ‘early_platform_quirks’ [-Wmissing-prototypes] arch/x86/kernel/tsc.c:1499:15: warning: no previous prototype for ‘calibrate_delay_is_known’ [-Wmissing-prototypes] arch/x86/kernel/process.c:653:13: warning: no previous prototype for ‘arch_post_acpi_subsys_init’ [-Wmissing-prototypes] arch/x86/kernel/process.c:717:15: warning: no previous prototype for ‘arch_randomize_brk’ [-Wmissing-prototypes] arch/x86/kernel/process.c:784:6: warning: no previous prototype for ‘do_arch_prctl_common’ [-Wmissing-prototypes] arch/x86/kernel/reboot.c:869:6: warning: no previous prototype for ‘nmi_panic_self_stop’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:176:27: warning: no previous prototype for ‘smp_reboot_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:260:28: warning: no previous prototype for ‘smp_reschedule_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:281:28: warning: no previous prototype for ‘smp_call_function_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/smp.c:291:28: warning: no previous prototype for ‘smp_call_function_single_interrupt’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:840:6: warning: no previous prototype for ‘arch_ftrace_update_trampoline’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:934:7: warning: no previous prototype for ‘arch_ftrace_trampoline_func’ [-Wmissing-prototypes] arch/x86/kernel/ftrace.c:946:6: warning: no previous prototype for ‘arch_ftrace_trampoline_free’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:114:6: warning: no previous prototype for ‘crash_smp_send_stop’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:351:5: warning: no previous prototype for ‘crash_setup_memmap_entries’ [-Wmissing-prototypes] arch/x86/kernel/crash.c:424:5: warning: no previous prototype for ‘crash_load_segments’ [-Wmissing-prototypes] arch/x86/kernel/machine_kexec_64.c:372:7: warning: no previous prototype for ‘arch_kexec_kernel_image_load’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:12:16: warning: no previous prototype for ‘__native_queued_spin_unlock’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:18:6: warning: no previous prototype for ‘pv_is_native_spin_unlock’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:24:16: warning: no previous prototype for ‘__native_vcpu_is_preempted’ [-Wmissing-prototypes] arch/x86/kernel/paravirt-spinlocks.c:30:6: warning: no previous prototype for ‘pv_is_native_vcpu_is_preempted’ [-Wmissing-prototypes] arch/x86/kernel/kvm.c:258:1: warning: no previous prototype for ‘do_async_page_fault’ [-Wmissing-prototypes] arch/x86/kernel/jailhouse.c:200:6: warning: no previous prototype for ‘jailhouse_paravirt’ [-Wmissing-prototypes] arch/x86/kernel/check.c:91:13: warning: no previous prototype for ‘setup_bios_corruption_check’ [-Wmissing-prototypes] arch/x86/kernel/check.c:139:6: warning: no previous prototype for ‘check_for_bios_corruption’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:32:13: warning: no previous prototype for ‘early_init_dt_scan_chosen_arch’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:42:13: warning: no previous prototype for ‘add_dtb’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:108:6: warning: no previous prototype for ‘x86_of_pci_init’ [-Wmissing-prototypes] arch/x86/kernel/devicetree.c:314:13: warning: no previous prototype for ‘x86_dtb_init’ [-Wmissing-prototypes] arch/x86/kernel/tracepoint.c:16:5: warning: no previous prototype for ‘trace_pagefault_reg’ [-Wmissing-prototypes] arch/x86/kernel/tracepoint.c:22:6: warning: no previous prototype for ‘trace_pagefault_unreg’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:113:22: warning: no previous prototype for ‘__startup_64’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:262:15: warning: no previous prototype for ‘__startup_secondary_64’ [-Wmissing-prototypes] arch/x86/kernel/head64.c:350:12: warning: no previous prototype for ‘early_make_pgtable’ [-Wmissing-prototypes] [ mingo: rewrote the changelog, fixed build errors. ] Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andy.shevchenko@gmail.com Cc: anton@enomsg.org Cc: ard.biesheuvel@linaro.org Cc: bhe@redhat.com Cc: bhelgaas@google.com Cc: bp@alien8.de Cc: ccross@android.com Cc: devicetree@vger.kernel.org Cc: douly.fnst@cn.fujitsu.com Cc: dwmw@amazon.co.uk Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: frank.rowand@sony.com Cc: frowand.list@gmail.com Cc: ivan.gorinov@intel.com Cc: jailhouse-dev@googlegroups.com Cc: jan.kiszka@siemens.com Cc: jgross@suse.com Cc: jroedel@suse.de Cc: keescook@chromium.org Cc: kexec@lists.infradead.org Cc: konrad.wilk@oracle.com Cc: kvm@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@kernel.org Cc: m.mizuma@jp.fujitsu.com Cc: namit@vmware.com Cc: oleg@redhat.com Cc: pasha.tatashin@oracle.com Cc: pbonzini@redhat.com Cc: prarit@redhat.com Cc: pravin.shedge4linux@gmail.com Cc: rajvi.jingar@intel.com Cc: rkrcmar@redhat.com Cc: robh+dt@kernel.org Cc: robh@kernel.org Cc: rostedt@goodmis.org Cc: takahiro.akashi@linaro.org Cc: thomas.lendacky@amd.com Cc: tony.luck@intel.com Cc: up2wing@gmail.com Cc: virtualization@lists.linux-foundation.org Cc: zhe.he@windriver.com Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1542852249-19820-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
AKASHI Takahiro
|
babac4a84a |
kexec_file, x86: move re-factored code to generic side
In the previous patches, commonly-used routines, exclude_mem_range() and prepare_elf64_headers(), were carved out. Now place them in kexec common code. A prefix "crash_" is given to each of their names to avoid possible name collisions. Link: http://lkml.kernel.org/r/20180306102303.9063-8-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
AKASHI Takahiro
|
eb7dae947e |
x86: kexec_file: clean up prepare_elf64_headers()
Removing bufp variable in prepare_elf64_headers() makes the code simpler and more understandable. Link: http://lkml.kernel.org/r/20180306102303.9063-7-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
AKASHI Takahiro
|
8d5f894a31 |
x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer
While CRASH_MAX_RANGES (== 16) seems to be good enough, fixed-number array is not a good idea in general. In this patch, size of crash_mem buffer is calculated as before and the buffer is now dynamically allocated. This change also allows removing crash_elf_data structure. Link: http://lkml.kernel.org/r/20180306102303.9063-6-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
AKASHI Takahiro
|
c72c7e6709 |
x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers()
The code guarded by CONFIG_X86_64 is necessary on some architectures which have a dedicated kernel mapping outside of linear memory mapping. (arm64 is among those.) In this patch, an additional argument, kernel_map, is added to enable/ disable the code removing #ifdef. Link: http://lkml.kernel.org/r/20180306102303.9063-5-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
AKASHI Takahiro
|
cbe6601617 |
x86: kexec_file: purge system-ram walking from prepare_elf64_headers()
While prepare_elf64_headers() in x86 looks pretty generic for other architectures' use, it contains some code which tries to list crash memory regions by walking through system resources, which is not always architecture agnostic. To make this function more generic, the related code should be purged. In this patch, prepare_elf64_headers() simply scans crash_mem buffer passed and add all the listed regions to elf header as a PT_LOAD segment. So walk_system_ram_res(prepare_elf64_headers_callback) have been moved forward before prepare_elf64_headers() where the callback, prepare_elf64_headers_callback(), is now responsible for filling up crash_mem buffer. Meanwhile exclude_elf_header_ranges() used to be called every time in this callback it is rather redundant and now called only once in prepare_elf_headers() as well. Link: http://lkml.kernel.org/r/20180306102303.9063-4-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Baoquan He
|
339b2ae0cd |
x86/apic: Fix restoring boot IRQ mode in reboot and kexec/kdump
This is a regression fix. Before, to fix erratum AVR31, the following commit: |
|
kbuild test robot
|
9275b933d4 |
resource: Fix resource_size.cocci warnings
arch/x86/kernel/crash.c:627:34-37: ERROR: Missing resource_size with res
arch/x86/kernel/crash.c:528:16-19: ERROR: Missing resource_size with res
Use resource_size function on resource object
instead of explicit computation.
Generated by: scripts/coccinelle/api/resource_size.cocci
Fixes:
|
|
Tom Lendacky
|
1d2e733b13 |
resource: Provide resource struct in resource walk callback
In preperation for a new function that will need additional resource information during the resource walk, update the resource walk callback to pass the resource structure. Since the current callback start and end arguments are pulled from the resource structure, the callback functions can obtain them from the resource structure directly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: kvm@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20171020143059.3291-10-brijesh.singh@amd.com |
|
Xunlei Pang
|
203e9e4121 |
kexec: move vmcoreinfo out of the kernel's .bss section
As Eric said, "what we need to do is move the variable vmcoreinfo_note out of the kernel's .bss section. And modify the code to regenerate and keep this information in something like the control page. Definitely something like this needs a page all to itself, and ideally far away from any other kernel data structures. I clearly was not watching closely the data someone decided to keep this silly thing in the kernel's .bss section." This patch allocates extra pages for these vmcoreinfo_XXX variables, one advantage is that it enhances some safety of vmcoreinfo, because vmcoreinfo now is kept far away from other kernel data structures. Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.com Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Juergen Gross <jgross@suse.com> Suggested-by: Eric Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Young <dyoung@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Ingo Molnar
|
08b46d5dd8 |
x86/boot/e820: Clean up the E820 table size define names
We've got a number of defines related to the E820 table and its size: E820MAP E820NR E820_X_MAX E820MAX The first two denote byte offsets into the zeropage (struct boot_params), and can are not used in the kernel and can be removed. The E820_*_MAX values have an inconsistent structure and it's unclear in any case what they mean. 'X' presuably goes for extended - but it's not very expressive altogether. Change these over to: E820_MAX_ENTRIES_ZEROPAGE E820_MAX_ENTRIES ... which are self-explanatory names. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
09821ff1d5 |
x86/boot/e820: Prefix the E820_* type names with "E820_TYPE_"
So there's a number of constants that start with "E820" but which are not types - these create a confusing mixture when seen together with 'enum e820_type' values: E820MAP E820NR E820_X_MAX E820MAX To better differentiate the 'enum e820_type' values prefix them with E820_TYPE_. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
61a5010163 |
x86/boot/e820: Rename everything to e820_table
No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
acd4c04872 |
x86/boot/e820: Rename 'e820_map' variables to 'e820_array'
In line with the rename to 'struct e820_array', harmonize the naming of common e820 table variable names as well: e820 => e820_array e820_saved => e820_array_saved e820_map => e820_array initial_e820 => e820_array_init This makes the variable names more consistent and easier to grep for. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
8ec67d97bf |
x86/boot/e820: Rename the basic e820 data types to 'struct e820_entry' and 'struct e820_array'
The 'e820entry' and 'e820map' names have various annoyances: - the missing underscore departs from the usual kernel style and makes the code look weird, - in the past I kept confusing the 'map' with the 'entry', because a 'map' is ambiguous in that regard, - it's not really clear from the 'e820map' that this is a regular C array. Rename them to 'struct e820_entry' and 'struct e820_array' accordingly. ( Leave the legacy UAPI header alone but do the rename in the bootparam.h and e820/types.h file - outside tools relying on these defines should either adjust their code, or should use the legacy header, or should create their private copies for the definitions. ) No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
5520b7e7d2 |
x86/boot/e820: Remove spurious asm/e820/api.h inclusions
A commonly used lowlevel x86 header, asm/pgtable.h, includes asm/e820/api.h spuriously, without making direct use of it. Removing it is not simple: over the years various .c code learned to rely on this indirect inclusion. Remove the unnecessary include - this should speed up the kernel build a bit, as a large header is not included anymore in totally unrelated code. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Thiago Jung Bauermann
|
ec2b9bfaac |
kexec_file: Change kexec_add_buffer to take kexec_buf as argument.
This is done to simplify the kexec_add_buffer argument list. Adapt all callers to set up a kexec_buf to pass to kexec_add_buffer. In addition, change the type of kexec_buf.buffer from char * to void *. There is no particular reason for it to be a char *, and the change allows us to get rid of 3 existing casts to char * in the code. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
|
Hidehiro Kawai
|
0ee59413c9 |
x86/panic: replace smp_send_stop() with kdump friendly version in panic path
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, for x86, kdump
routines fail to save other CPUs' registers and disable virtualization
extensions.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak
function, and it just call smp_send_stop(). Architecture codes should
override it so that kdump can work appropriately. This patch only
provides x86-specific version.
For Xen's PV kernel, just keep the current behavior.
NOTES:
- Right solution would be to place crash_smp_send_stop() before
__crash_kexec() invocation in all cases and remove smp_send_stop(), but
we can't do that until all architectures implement own
crash_smp_send_stop()
- crash_smp_send_stop()-like work is still needed by
machine_crash_shutdown() because crash_kexec() can be called without
entering panic()
Fixes:
|
|
Paul Gortmaker
|
186f43608a |
x86/kernel: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Toshi Kani
|
f296f26349 |
x86/kexec: Remove walk_iomem_res() call with GART type
There is no longer any driver inserting a "GART" region in the
kernel since
|
|
|
Toshi Kani
|
f0f4711aa1 |
x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
Change the callers of walk_iomem_res() scanning for the following resources by name to use walk_iomem_res_desc() instead. "ACPI Tables" "ACPI Non-volatile Storage" "Persistent Memory (legacy)" "Crash kernel" Note, the caller of walk_iomem_res() with "GART" will be removed in a later patch. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dave Young <dyoung@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chun-Yi <joeyli.kernel@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Don Zickus <dzickus@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Lee, Chun-Yi <joeyli.kernel@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Minfei Huang <mnfhuang@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takao Indoh <indou.takao@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kexec@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/1453841853-11383-15-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Takao Indoh
|
da06a43d3f |
perf, x86: Stop Intel PT before kdump starts
This patch stops Intel PT logging and saves its registers in memory before kdump is started. This feature is needed to prevent Intel PT from overwriting its log buffer after panic, and saved registers are needed to find the last position where Intel PT wrote data. After the crash dump is captured by kdump, users can retrieve the log buffer from the vmcore and use it to investigate bad kernel behavior. Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin<alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: H.Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/r/1446614553-6072-3-git-send-email-indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Minfei Huang
|
e9c40d257f |
x86/kexec: Remove obsolete 'in_crash_kexec' flag
Previously, UV NMI used the 'in_crash_kexec' flag to determine whether we are in a kdump kernel or not: |
|
Lee, Chun-Yi
|
e3c41e37b0 |
x86/kexec: Fix kexec crash in syscall kexec_file_load()
The original bug is a page fault crash that sometimes happens
on big machines when preparing ELF headers:
BUG: unable to handle kernel paging request at ffffc90613fc9000
IP: [<ffffffff8103d645>] prepare_elf64_ram_headers_callback+0x165/0x260
The bug is caused by us under-counting the number of memory ranges
and subsequently not allocating enough ELF header space for them.
The bug is typically masked on smaller systems, because the ELF header
allocation is rounded up to the next page.
This patch modifies the code in fill_up_crash_elf_data() by using
walk_system_ram_res() instead of walk_system_ram_range() to correctly
count the max number of crash memory ranges. That's because the
walk_system_ram_range() filters out small memory regions that
reside in the same page, but walk_system_ram_res() does not.
Here's how I found the bug:
After tracing prepare_elf64_headers() and prepare_elf64_ram_headers_callback(),
the code uses walk_system_ram_res() to fill-in crash memory regions information
to the program header, so it counts those small memory regions that
reside in a page area.
But, when the kernel was using walk_system_ram_range() in
fill_up_crash_elf_data() to count the number of crash memory regions,
it filters out small regions.
I printed those small memory regions, for example:
kexec: Get nr_ram ranges. vaddr=0xffff880077592258 paddr=0x77592258, sz=0xdc0
Based on the code in walk_system_ram_range(), this memory region
will be filtered out:
pfn = (0x77592258 + 0x1000 - 1) >> 12 = 0x77593
end_pfn = (0x77592258 + 0xfc0 -1 + 1) >> 12 = 0x77593
end_pfn - pfn = 0x77593 - 0x77593 = 0 <=== if (end_pfn > pfn) is FALSE
So, the max_nr_ranges that's counted by the kernel doesn't include
small memory regions - causing us to under-allocate the required space.
That causes the page fault crash that happens in a later code path
when preparing ELF headers.
This bug is not easy to reproduce on small machines that have few
CPUs, because the allocated page aligned ELF buffer has more free
space to cover those small memory regions' PT_LOAD headers.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443531537-29436-1-git-send-email-jlee@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|