Since 040fdcde28 ("drm/amdgpu: respect the abmlevel module parameter value
if it is set"), the default value for amdgpu.abmlevel was set to -1, or auto.
However, the comment explaining the default value was not updated to reflect
the change (-1, or auto; not -1, or disabled).
Clarify that the default value (-1) means auto.
Fixes: 040fdcde28 ("drm/amdgpu: respect the abmlevel module parameter value if it is set")
Reported-by: Ruikai Liu <rickliu2000@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To check the status of S3 suspend completion,
use the PM core pm_suspend_global_flags bit(1)
to detect S3 abort events. Therefore, clean up
the AMDGPU driver's private flag suspend_complete.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user has requested NPS mode switch, place the request through PSP
during unload of the driver. For devices which are part of a hive, all
requests are placed together. If one of them fails, revert back to the
current NPS mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some distributions have been patching amdgpu to enable overdrive by
default which may compromise stability. Furthermore when bug reports
are brought upstream it's not obvious that the system has been tampered
with.
When overdrive is enabled taint the kernel and leave a critical message
in the logs for users so that it's obvious in a bug report it's been
tampered with.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
amdgpu:
- CU occupancy logic fix
- SDMA queue fix
-----BEGIN PGP SIGNATURE-----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=r1M/
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes for the week to end the merge window, i915 and xe have a
few each, amdgpu makes up most of it with a bunch of SR-IOV related
fixes amongst others.
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe:
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
- CU occupancy logic fix
- SDMA queue fix"
* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
drm/amd/pm: update workload mask after the setting
drm/amdgpu: bump driver version for cleared VRAM
drm/amdgpu: fix vbios fetching for SR-IOV
drm/amdgpu: fix PTE copy corruption for sdma 7
drm/amdkfd: Add SDMA queue quantum support for GFX12
drm/amdgpu/vcn: enable AV1 on both instances
drm/amdkfd: Fix CU occupancy for GFX 9.4.3
drm/amdkfd: Update logic for CU occupancy calculations
drm/amdgpu: skip coredump after job timeout in SRIOV
drm/amdgpu: sync to KFD fences before clearing PTEs
drm/amdgpu/mes12: set enable_level_process_quantum_check
drm/i915/dp: Fix colorimetry detection
drm/amdgpu/mes12: reduce timeout
drm/amdgpu/mes11: reduce timeout
drm/amdgpu: use GEM references instead of TTMs v2
drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
drm/amdgpu: update golden regs for gfx12
drm/amdgpu: clean up vbios fetching code
drm/amd/display: handle nulled pipe context in DCE110's set_drr()
...
Drop delayed reset work handler as it is no longer used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop pending_reset flag in gmc block. Instead use init level to
determine which type of init is preferred - in this case MINIMAL.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver now clears VRAM on allocation. Bump the
driver version so mesa knows when it will get
cleared vram by default.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The amdgpu driver specifies a preferred color mode depending on
the available video memory, with a default of 32. Adapt this for
the new client interface.
v5:
- select DRM_CLIENT_SELECTION
v2:
- style changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Tested-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-66-tzimmermann@suse.de
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler;
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
support Innolux G070ACE-LH3 plus DT bindings
support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701:
decouple DSI and DRM code
add SPI support
support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop: Support RGB display on Rockchip RK3066; Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset
-----BEGIN PGP SIGNATURE-----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=7jR+
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
Enables users to update SVM's default granularity, used in
buffer migration and handling of recoverable page faults.
Param value is set in terms of log(numPages(buffer)),
e.g. 9 for a 2 MIB buffer
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add this flag to enable experimental resets for testing before they
are fully validated.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the implementation of struct drm_driver.lastclose. The hook
was only necessary before in-kernel DRM clients existed, but is now
obsolete. The code in amdgpu_driver_lastclose_kms() is performed by
drm_lastclose().
v2:
- update commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-3-tzimmermann@suse.de
Increase the KMS minor version to indicate GFX12 DCC support since this
contains a major change in how DCC is managed across IPs like GFX, DCN
etc. This will be used mainly by userspace like Mesa to figure out
DCC support on GFX12 hardware.
v2: fix version number (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d3620eeae8.
Revert this due to a final solution:
commit ed3165d660 ("drm/amdgpu/jpeg5: reprogram doorbell setting after power up for each playback")
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Sonny Jiang <sonjiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
add module parameter for jpeg. this is a temporary workaround for jpeg unit test fail
on vcn 5.0 now. will be removed later.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch the default mes to uni mes for gfx v12.
V2: remove uni_mes set for gfx v11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use debug_mask=0x10 (BIT.4) param to help enable RAS ACA.
(RAS ACA is disabled by default.)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added support to capture unsch fw debug logs in debugfs.
To enable set amdgpu_umschfw_log =1 in boot args.
v1 - rename variable to umsch_mm_fwlog (Veera)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and
change the symbol infix from _generic_ to _ttm_. Link the source file
into TTM helpers, so that it is only build if TTM-based drivers have
been selected. Select DRM_TTM_HELPER for loongson.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
In order to support more test cases, support user
change reset_method at runtime.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough environment, the driver triggers the mode-1 reset on
reload. The reset causes the core dump collection which is delayed task
and prevents driver from unloading until it is completed. Since we do
not need to collect data on "reset on reload" case, we can skip core
dump collection.
v2: Use the same flag to avoid calling amdgpu_reset_reg_dumps as well.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize the code to add support for BAMACO mode checking
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough environment, when amdgpu is reloaded after unload, mode-1
is triggered after initializing the necessary IPs, That init does not
include KFD, and KFD init waits until the reset is completed. KFD init
is called in the reset handler, but in this case, the zone device and
drm client is not initialized, causing app to create kernel panic.
v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create.
As the previous version has the potential of creating DRM client twice.
v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA
before SDMA init. Adding the condition to in drm client creation, on top of v1,
to guard against drm client creation call multiple times.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because the rpm_mode flag is already set when the driver
is initialized, we use it directly for runtime suspend/resume
instead of checking it again
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After 4020c22802 ("drm/amdgpu: don't runtime suspend if there are
displays attached (v3)"), "ret" is unconditionally set later before being
used, so there's point in initializing it and the associated comment is no
longer meaningful.
Remove the comment and the unnecessary initialization.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e94e787e37.
This conflicts with how compositors want to handle VRR. Now
that compositors actually handle VRR, we probably don't need
freesync video.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, if the abmlevel module parameter is set, it is possible for
user space to override the ABM level at some point after boot. However,
that is undesirable because it means that we aren't respecting the
user's wishes with regard to the level that they want to use. So,
prevent user space from changing the ABM level if the module parameter
is set to a non-auto value.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to eliminate interrupt warning below:
"[drm] Fence fallback timer expired on ring sdma0.0".
An early vm pt clearing job is sent to SDMA ahead of interrupt enabled.
And re-locating the drm client creation following after drm_dev_register
looks like a more proper flow.
v2: wrap the drm client creation
Fixes: 1819200166 ("drm/amdkfd: Export DMABufs from KFD using GEM handles")
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling amdgpu_device_ip_resume_phase1() during shutdown leaves the
HW in an active state and is an unbalanced use of the IP callbacks.
Using the IP callbacks like this can lead to memory leaks, double
free and imbalanced reference counters.
Leaving the HW in an active state can lead to DMA accesses to memory now
freed by the driver.
Both is a complete no-go for driver unload so completely revert the
workaround for now.
This reverts commit f5c7e77970.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: do not initialise globals to 0
Signed-off-by: chenxuebing <chenxb_99091@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To bring debug options into effect in early initialization phase
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use debug_mask=0x8 param to help isolating data path issues
on new systems in early phase.
v2: rename the flag for explicitness (lijo)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c572abffe9.
Will use debug module param instead of independent module param.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This param can help isolating data path issues on new systems in early phase.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This improves latency if the GPU is already busy with other work.
This is useful for VR compositors that submit highly latency-sensitive
compositing work on high-priority compute queues while the GPU is busy
rendering the next frame.
Userspace merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26462
v2: bump driver version (Alex)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).
--
v1->v2:
- update the prompt for feature support(Lijo)
v8->v9:
- update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
- correct the logics for wbrf range sorting(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a module parameter to control the AGP aperture. The AGP
aperture is an aperture in the GPU's internal address space
which provides direct non-paged access to the platform address
space. This access is non-snooped so only uncached memory
can be accessed.
Add a knob so that we can toggle this for debugging.
Fixes: 67318cb843 ("drm/amdgpu/gmc11: set gart placement GC11")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a new struct array to define the asic information which
asic type needs to be fixed.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linux PM core has a prepare() callback run before suspend.
If the system is under high memory pressure, the resources may need
to be evicted into swap instead. If the storage backing for swap
is offlined during the suspend() step then such a call may fail.
So move this step into prepare() to move evict majority of
resources and update all non-pmops callers to call the same callback.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The module parameter can be used to test more easily enabling seamless
boot support on additional ASICs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a module option to disable soft recoveries on amdgpu, making
every recovery go through the device reset path. This option makes
easier to force device resets for testing and debugging purposes.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge all developer debug options available as separated module
parameters in one, making it obvious that are for developers.
Drop the obsolete module options in favor of the new ones.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Multi Media User Mode Scheduler
(0 = disabled (default), 1 = enabled).
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow the user to specify -2 as auto enabled with displays.
By default we don't enter runtime suspend when there are
displays attached because it does not work well in some
desktop environments due to the driver sending hotplug
events on resume in case any new displays were attached
while the GPU was powered down. Some users still want
this functionality though, so this lets you enable it.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2428
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Freesync Video mode was enabled by default. Hence no need for the module
parameter, so remove it completely
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we use the dGPU path for all APUs, drop the
IOMMUv2 support.
v2: drop the now unused queue manager functions for gfx7/8 APUs
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As amdgpu.h is getting decomposed, move vram and gtt extern defines into
amdgpu_ttm.h & flash extern to amdgpu_psp.h
Fixes: f9acfafc34 ("drm/amdgpu: Move externs to amdgpu.h file from amdgpu_drv.c")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sort the include files that are included in amdgpu_drv.c alphabetically.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_vram_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_gtt_mgr_attr_group;
WARNING: externs should be avoided in .c files
+extern const struct attribute_group amdgpu_flash_attr_group;
And other style fixes:
WARNING: Block comments should align the * on each line
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
Individually creating attributes can be racy, instead make attributes
using attribute groups and control their visibility with an is_visible
callback to only show when using appropriate products.
v2: squash in fix for PSP 13.0.10
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de
Not all devices carry VBIOS version information. Add the device
attribute only if supported.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The callback struct drm_driver.gem_prime_mmap as been removed in
commit 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap").
Do not assign to it. The assigned function, drm_gem_prime_mmap(), is
now the default for the operation, so there is no change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619141129.2002-1-tzimmermann@suse.de
Backmerging into drm-misc-next to get commit 2c1c7ba457
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
All drivers initialize this field with drm_gem_prime_mmap(). Call
the function directly and remove the field. Simplifies the code and
resolves a long-standing TODO item.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613150441.17720-3-tzimmermann@suse.de
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
enforce process isolation between graphics and compute via using the same reserved vmid.
v2: remove params "struct amdgpu_vm *vm" from
amdgpu_vmid_alloc_reserved and amdgpu_vmid_free_reserved.
Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the accelerator PCIe class and match the
class in amdgpu for 0x1002 devices of that class.
From PCI spec:
"PCI Code and ID Assignment, r1.9, sec 1, 1.19"
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
0x5b70 is a missing RV370 secondary id. Add it so
we don't try and probe it with amdgpu.
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdxcp platform device as spatial partition device.
-v2: remove unused variable
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add the base class id for accelerator (lijo)
v3: add the new pci class in amdgpu tree (hawking)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support partition drm devices on GC_HWIP IP_VERSION(9, 4, 3).
This is a temporary solution and will be superceded.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Selects the MTYPE to be used for local memory,
(0 = MTYPE_CC (default), 1 = MTYPE_NC, 2 = MTYPE_RW)
v2: squash in build fix (Alex)
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When auto mode is specified, driver will choose the right compute
partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add parsing of ACPI xcc objects and fill in relevant info from them by
invoking the DSM methods.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a module parameter to override the partition mode.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OpenGL EXT_robustness extension expects the driver to stop reporting
GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready
to accept submission again.
This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag,
that let the UMD know that the reset is still not finished.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix following checkpatch style errors in amdgpu_drv.c &
amdgpu_device.c
ERROR: exactly one space required after that #ifdef
ERROR: spaces required around that '+=' (ctx:WxV)
ERROR: space required before the open brace '{'
ERROR: spaces required around that '||' (ctx:VxE)
ERROR: space prohibited before that close parenthesis ')'
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: code indent should use tabs where possible
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver doesn't resubmit jobs on hangs any more, hence drop
the hang limit parameter - amdgpu_job_hang_limit, wherever it is used.
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Global variables do not need to be initialized to 0 or NULL and checkpatch
flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:
ERROR: do not initialise globals to NULL
+char *amdgpu_disable_cu = NULL;
+char *amdgpu_virtual_display = NULL;
Fix this checkpatch error.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Global variables do not need to be initialized to 0 and checkpatch
flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:
ERROR: do not initialise globals to 0
+int amdgpu_no_queue_eviction_on_vm_fault = 0;
Fix this checkpatch error.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
[ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62
We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ignore ras umc bad page threshold by default, GPU initialization won't
be stopped in this mode.
v2: refine the description of bad_page_threshold.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11
Other fields are exposed from IP discovery.
enabled_rb_pipes_mask_hi is added for future chips, currently 0.
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APUs before Raven didn't support s0ix. As we just relieved some
of the safety checks for s0ix to improve power consumption on
APUs that support it but that are missing BIOS support a new
blind spot was introduced that a user could "try" to run s0ix.
Plug this hole so that if users try to run s0ix on anything older
than Raven it will just skip suspend of the GPU.
Fixes: cf488dcd0a ("drm/amd: Allow s0ix without BIOS support")
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.
v2: fix typo
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fac53471d0.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jeffbai@aosc.io
Dave Airlie
Prike Liang
Lijo Lazar
Mario Limonciello
Linus Torvalds
Alex Deucher
Thomas Zimmermann
Ramesh Errabolu
Christian Brauner
Aurabindo Pillai
Kenneth Feng
Likun Gao
Yang Wang
Saleemkhan Jamadar
Jack Xiao
Stanley.Yang
Ahmad Rehman
Ma Jun
shaoyunl
Bjorn Helgaas
Hamza Mahfooz
Le Ma
Christian König
chenxuebing
Friedrich Vock
Evan Quan
Boyuan Zhang
André Almeida
Lang Yu
Srinivasan Shanmugam
Daniel Vetter
Chong Li
Shiwu Zhang
James Zhu
Graham Sider
David Francis
Pierre-Eric Pelloux-Prayer
Rob Clark
Tim Huang
Tao Zhou
Marek Olšák
Vitaly Prosyak