We keep the gang submission fence around in adev, make sure that it
stays alive.
v2: fix memory leak on retry
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI_CLASS_ACCELERATOR_PROCESSING devices won't ever be
the sysfb, so there is no need to free conflicting
apertures.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use IP version specific xgmi speed/width for bandwidth calculation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for CPERs on VFs.
VFs do not receive PMFW messages directly; as such, they need to
query them from the host. To avoid hitting host event guard,
CPER queries need to be rate limited. CPER queries share the same
RAS telemetry buffer as error count query, so a mutex protecting
the shared buffer was added as well.
For readability, the amdgpu_detect_virtualization was refactored
into multiple individual functions.
Signed-off-by: Tony Yi <Tony.Yi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f44)
Cc: stable@vger.kernel.org
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-drm-v1-4-210f2b36b9bf@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of get_clockgating_state.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move code about checking aca enabled to the cper init/fini function
to make code clean.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] <TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.017057] amdgpu_pci_probe+0x1c2/0x660 [amdgpu]
[ 253.017493] local_pci_probe+0x4b/0xb0
[ 253.017746] work_for_cpu_fn+0x1a/0x30
[ 253.017995] process_one_work+0x21e/0x680
[ 253.018248] worker_thread+0x190/0x330
[ 253.018500] ? __pfx_worker_thread+0x10/0x10
[ 253.018746] kthread+0xe7/0x120
[ 253.018988] ? __pfx_kthread+0x10/0x10
[ 253.019231] ret_from_fork+0x3c/0x60
[ 253.019468] ? __pfx_kthread+0x10/0x10
[ 253.019701] ret_from_fork_asm+0x1a/0x30
[ 253.019939] </TASK>
v2: s/spin_trylock/spin_lock_irqsave to be safe (Christian).
Fixes: e864180ee4 ("drm/amdgpu: Add lock around VF RLCG interface")
Cc: lin cao <lin.cao@amd.com>
Cc: Jingwen Chen <Jingwen.Chen2@amd.com>
Cc: Victor Skvortsov <victor.skvortsov@amd.com>
Cc: Zhigang Luo <zhigang.luo@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And initialize it, this is a pure software ring to store RAS CPER data.
v2: change ring size to 0x100000
v2: update the initialization of count_dw of cper ring, it's dword
variable
v3: skip VM inv eng for cper
v3: init/fini when aca enabled
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce utility functions designed to assist
in populating CPER records.
v2: call cper_init/fini in device_ip_init/fini.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DRM's device wedged event to notify userspace that a reset had
happened. For now, only use `none` method meant for telemetry
capture.
In the future we might want to report a recovery method if the reset didn't
succeed.
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-6-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Certain SOCs may not need much data from VBIOS. Some data like VBIOS
version used will be missed but it doesn't affect functionality. Add a
flag to make VBIOS image optional.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of read_bios, use get_bios_flags to get various options around
reading VBIOS.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use bios_release wrapper to release memory allocated for vbios image and
reset the variables.
v2:
Use the same wrapper for clean up in sw_fini (Alex Deucher)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change. Rework the code to allow for
adding some additional i2c buses in conjunction with DC
in the future.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eb ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
If the parent is NULL, adev->pdev is used to retrieve the PCIe speed and
width, ensuring that the function can still determine these
capabilities from the device itself.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6193 amdgpu_device_gpu_bandwidth()
error: we previously assumed 'parent' could be null (see line 6180)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
6170 static void amdgpu_device_gpu_bandwidth(struct amdgpu_device *adev,
6171 enum pci_bus_speed *speed,
6172 enum pcie_link_width *width)
6173 {
6174 struct pci_dev *parent = adev->pdev;
6175
6176 if (!speed || !width)
6177 return;
6178
6179 parent = pci_upstream_bridge(parent);
6180 if (parent && parent->vendor == PCI_VENDOR_ID_ATI) {
^^^^^^
If parent is NULL
6181 /* use the upstream/downstream switches internal to dGPU */
6182 *speed = pcie_get_speed_cap(parent);
6183 *width = pcie_get_width_cap(parent);
6184 while ((parent = pci_upstream_bridge(parent))) {
6185 if (parent->vendor == PCI_VENDOR_ID_ATI) {
6186 /* use the upstream/downstream switches internal to dGPU */
6187 *speed = pcie_get_speed_cap(parent);
6188 *width = pcie_get_width_cap(parent);
6189 }
6190 }
6191 } else {
6192 /* use the device itself */
--> 6193 *speed = pcie_get_speed_cap(parent);
^^^^^^ Then we are toasted here.
6194 *width = pcie_get_width_cap(parent);
6195 }
6196 }
Fixes: 757e8b951c ("drm/amdgpu: cache gpu pcie link width")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the PCIe link with of the device itself (or it's
integrated upstream bridge) and cache that.
v2: fix typo
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3820
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'add ip block' causes a confusion if the blocks are disabled later with
ip_block_mask. Instead change to 'detected' and also add device context.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the kernel hasn't been compiled with PCIe hotplug support this
can lead to problems with dGPUs that use BOCO because they effectively
drop off the bus.
To prevent issues, disable BOCO support when compiled without PCIe hotplug.
Reported-by: Gabriel Marcano <gabemarcano@yahoo.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707#note_2696862
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241211155601.3585256-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VF device sets the RAS flag when mailbox data can't be read properly.
There is no conclusive way to tell if the real source is RAS error.
Therefore VF schedules a KFD based reset which doesn't set RAS source.
SKip checking RAS source for any VF scheduled recovery.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Vojislav Tomasevic <vojislav.tomasevic@amd.com>
Reviewed-by: Yiqing Yao <yiqing.yao@amd.com>
Tested-by: Yiqing Yao <yiqing.yao@amd.com>
Fixes: e1ee2111ca ("drm/amdgpu: Prefer RAS recovery for scheduler hang")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add gfx950 basic support
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make spelling and punctuation changes to ease reading of the comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resource eviction isn't needed for s3 or s2idle on APUs, but should
be run for S4. As amdgpu_device_evict_resources() will be called
by prepare notifier adjust logic so that APUs only cover S4.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20241128032656.2090059-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, when host driver performs MODE 1 reset and notifies FLR to
guest driver, there is a small chance that there is no job running on hw
but the driver has not updated the pending list yet, causing the driver
not respond the FLR request. Modify the has_job_running function to
make sure if there is still running job.
v2: Use amdgpu_fence_count_emitted to determine job running status.
v3: Remove the timeout wait in has_job_running
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before scheduling a recovery due to scheduler/job hang, check if a RAS
error is detected. If so, choose RAS recovery to handle the situation. A
scheduler/job hang could be the side effect of a RAS error. In such
cases, it is required to go through the RAS error recovery process. A
RAS error recovery process in certains cases also could avoid a full
device device reset.
An error state is maintained in RAS context to detect the block
affected. Fatal Error state uses unused block id. Set the block id when
error is detected. If the interrupt handler detected a poison error,
it's not required to look for a fatal error. Skip fatal error checking
in such cases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMD_IP_BLOCK_TYPE_NUM
instead of AMDGPU_MAX_IP_NUM to fix the issue.
Fixes: 14f2fe34f5 ("drm/amdgpu: Add init levels")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 274e3f4596.
Additional review comments to address. Will resubmit.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM
instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 14f2fe34f5 ("drm/amdgpu: Add init levels")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some in_reset checks are infact checking whether the state is
reinitialization after reset. Replace with reset_in_recovery calls to
identify that it's really checking for recovery stage after reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When device needs to be reset before initialization, it's not required
for all IPs to be initialized before a reset. In such cases, it needs to
identify whether the IP/feature is initialized for the first time or
whether it's reinitialized after a reset.
Add RESET_RECOVERY init level to identify post reset reinitialization
phase. This only provides a device level identification, IP/features may
choose to track their state independently also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable RAS late init if VF RAS Telemetry is supported.
When enabled, the VF can use this interface to query total
RAS error counts from the host.
The VF FB access may abruptly end due to a fatal error,
therefore the VF must cache and sanitize the input.
The Host allows 15 Telemetry messages every 60 seconds, afterwhich
the host will ignore any more in-coming telemetry messages. The VF will
rate limit its msg calling to once every 5 seconds (12 times in 60 seconds).
While the VF is rate limited, it will continue to report the last
good cached data.
v2: Flip generate report & update statistics order for VF
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raise an info message in kernel log if PCIe root complex
determines that a AMD GPU device D<i> cannot have P2P
communication with another AMD GPU device D<j>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two sysfs interfaces for gfx and compute:
gfx_reset_mask
compute_reset_mask
These interfaces are read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: Fixing uninitialized variables (Tim)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.13:
All of the previous pull request, with MORE!
Core Changes:
- Update documentation for scheduler start/stop and job init.
- Add dedede and sm8350-hdk hardware to ci runs.
Driver Changes:
- Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d,
panthor docs, and leadtek-ltk050h3146w.
- Crashdump support for qaic.
- Support DP compliance in zynqmp.
- Add Samsung S6E88A0-AMS427AP24 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
This NULL check is reversed so the function doesn't work.
Fixes: dad01f93f4 ("drm/amdgpu: validate hw_fini before function call")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f4fc849e-4e76-4448-8657-caa4c69910b0@stanley.mountain
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to wait_for_idle,
validate the function pointer like we do in sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to resume, validate
the function pointer like we do in sw_init.
Use the helper function amdgpu_ip_block_resume where
same checks and calls are repeated.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to suspend, validate
the function pointer like we do in sw_init.
Use the helper function amdgpu_ip_block_suspend where
same checks and calls are repeated.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to hw_fini, validate
the function pointer like we do in sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to sw_fini, validate
the function pointer like we do in sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to sw_init, validate
the function pointer like we do in late_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace calls to drm_fb_helper_set_suspend_unlocked() with calls
to the client functions drm_client_dev_suspend() and
drm_client_dev_resume(). Any registered in-kernel client will now
receive suspend and resume events.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-9-tzimmermann@suse.de
DRM's aperture functions have long been implemented as helpers
under drivers/video/ for use with fbdev. Avoid the DRM wrappers by
calling the video functions directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-2-tzimmermann@suse.de
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of post_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of pre_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of check_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of prepare_suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of late_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of early_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add partition config nodes in sysfs to get resource instance details for
a particular partition mode. A resource could be anything like an xcc,
vcn decoder, system dma units etc.
Details of various resource instances are available under
/sys/bus/pci/devices/.../compute_partition_config/
Select a partition configuration:
/sys/bus/pci/devices/.../compute_partition_config/xcp_config
Number of instances of a resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_inst
Total partitions sharing the resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_shared
v2: Update node name as per spec
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use XGMI hive information to rely on resetting XGMI devices on
initialization rather than using mgpu structure. mgpu structure may have
other devices as well.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifxu@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a separate function to read badpage data during initialization.
Reading bad pages will need hardware access and cannot be done during
reset. Hence in cases where device needs a full reset during
init itself, attempting to read will cause a deadlock.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_ip_is_idle is unused.
It was renamed from 'amdgpu_is_idle' which was originally added in
commit 5dbbb60ba6 ("drm/amdgpu: add IP helpers for wait_for_idle and is_idle")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To handle amdgpu_device reference for different GPUs
we add it's reference in each ip block which can be
used to differentiate between difference gpu devices.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the reinitialization part after a reset to another function. No
functional changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop pending_reset flag in gmc block. Instead use init level to
determine which type of init is preferred - in this case MINIMAL.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add init levels to define the level to which device needs to be
initialized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function to check if ip block is enabled
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was only used as workaround for recovering the page tables after
VRAM was lost and is no longer necessary after the function
amdgpu_vm_bo_reset_state_machine() started to do the same.
Compute never used shadows either, so the only proplematic case left is
SVM and that is most likely not recoverable in any way when VRAM is
lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The module param pcie_p2p should be checked for kfd p2p feature, so add it.
Fixes: 75f0efbc4b ("drm/amdgpu: Take IOMMU remapping into account for p2p checks")
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current implementation of drm_sched_start uses a hardcoded
-ECANCELED to dispose of a job when the parent/hw fence is NULL.
This results in drm_sched_job_done being called with -ECANCELED for
each job with a NULL parent in the pending list, making it difficult
to distinguish between recovery methods, whether a queue reset or a
full GPU reset was used.
To improve this, we first try a soft recovery for timeout jobs and
use the error code -ENODATA. If soft recovery fails, we proceed with
a queue reset, where the error code remains -ENODATA for the job.
Finally, for a full GPU reset, we use error codes -ECANCELED or
-ETIME. This patch adds an error code parameter to drm_sched_start,
allowing us to differentiate between queue reset and GPU reset
failures. This enables user mode and test applications to validate
the expected correctness of the requested operation. After a
successful queue reset, the only way to continue normal operation is
to call drm_sched_job_done with the specific error code -ENODATA.
v1: Initial implementation by Jesse utilized amdgpu_device_lock_reset_domain
and amdgpu_device_unlock_reset_domain to allow user mode to track
the queue reset status and distinguish between queue reset and
GPU reset.
v2: Christian suggested using the error codes -ENODATA for queue reset
and -ECANCELED or -ETIME for GPU reset, returned to
amdgpu_cs_wait_ioctl.
v3: To meet the requirements, we introduce a new function
drm_sched_start_ex with an additional parameter to set
dma_fence_set_error, allowing us to handle the specific error
codes appropriately and dispose of bad jobs with the selected
error code depending on whether it was a queue reset or GPU reset.
v4: Alex suggested using a new name, drm_sched_start_with_recovery_error,
which more accurately describes the function's purpose.
Additionally, it was recommended to add documentation details
about the new method.
v5: Fixed declaration of new function drm_sched_start_with_recovery_error.(Alex)
v6 (chk): rebase on upstream changes, cleanup the commit message,
drop the new function again and update all callers,
apply the errno also to scheduler fences with hw fences
v7 (chk): rebased
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826122541.85663-1-christian.koenig@amd.com
[background] when unloading amdgpu driver right after running a
workload, drain_workqueue is causing "Fence fallback timer
expired on ring sdma0.0". Under sriov, this issue will cause sriov
full access timeout and a reset happening.
move drain_workqueue before shutdown is set to allow ih process and
before enter full access under sriov to avoid full access time cost.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm lost status can only be obtained after a GPU reset occurs, but
sometimes a dev core dump can be happened before GPU reset. So a new
argument is added to tell the dev core dump implementation whether to
skip printing the vram_lost status in the dump.
And this patch is also trying to decouple the core dump function from
the GPU reset function, by replacing the argument amdgpu_reset_context
with amdgpu_job to specify the context for core dump.
V2: Inform user if VRAM lost check is skipped so users don't assume
VRAM wasn't lost (Alex)
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when trying to enable p2p the amdgpu_device_is_peer_accessible()
checks the condition where address_mask overlaps the aper_base
and hence returns 0, due to which the p2p disables for this platform
IOMMU should remap the BAR addresses so the device can access
them. Hence check if peer_adev is remapping DMA
v5: (Felix, Alex)
- fixing comment as per Alex feedback
- refactor code as per Felix
v4: (Alex)
- fix the comment and description
v3:
- remove iommu_remap variable
v2: (Alex)
- Fix as per review comments
- add new function amdgpu_device_check_iommu_remap to check if iommu
remap
Signed-off-by: Rahul Jain <Rahul.Jain@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces the Enforce Isolation Handler designed to enforce
shader isolation on AMD GPUs, which helps to prevent data leakage
between different processes.
The handler counts the number of emitted fences for each GFX and compute
ring. If there are any fences, it schedules the `enforce_isolation_work`
to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences,
it signals the Kernel Fusion Driver (KFD) to resume the runqueue.
The function is synchronized using the `enforce_isolation_mutex`.
This commit also introduces a reference count mechanism
(kfd_sch_req_count) to keep track of the number of requests to enable
the KFD scheduler. When a request to enable the KFD scheduler is made,
the reference count is decremented. When the reference count reaches
zero, a delayed work is scheduled to enforce isolation after a delay of
GFX_SLICE_PERIOD.
When a request to disable the KFD scheduler is made, the function first
checks if the reference count is zero. If it is, it cancels the delayed
work for enforcing isolation and checks if the KFD scheduler is active.
If the KFD scheduler is active, it sends a request to stop the KFD
scheduler and sets the KFD scheduler state to inactive. Then, it
increments the reference count.
The function is synchronized using the kfd_sch_mutex to ensure that the
KFD scheduler state and reference count are updated atomically.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a new sysfs attribute 'enforce_isolation' to control
the 'enforce_isolation' setting per GPU. The attribute can be read and
written, and accepts values 0 (disabled) and 1 (enabled).
When 'enforce_isolation' is enabled, reserved VMIDs are allocated for
each ring. When it's disabled, the reserved VMIDs are freed.
The set function locks a mutex before changing the 'enforce_isolation'
flag and the VMIDs, and unlocks it afterwards. This ensures that these
operations are atomic and prevents race conditions and other concurrency
issues.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes enforce_isolation setting to be per GPU and per
partition by adding the enforce_isolation array to the adev structure.
The adev variable is set based on the global enforce_isolation module
parameter during device initialization.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
is used to determine whether to enforce isolation between graphics and
compute processes on that GPU.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
and partition is used to determine whether to enforce isolation between
graphics and compute processes on that GPU and partition.
This allows the enforce_isolation setting to be controlled individually
for each GPU and each partition, which is useful in a system with
multiple GPUs and partitions where different isolation settings might be
desired for different GPUs and partitions.
v2: fix loop in amdgpu_vmid_mgr_init() (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Christian König
Flora Cui
Alex Deucher
Lijo Lazar
Greg Kroah-Hartman
Dave Airlie
Tony Yi
Thomas Weißschuh
Sunil Khatri
Xiang Liu
Srinivasan Shanmugam
Tao Zhou
Hawking Zhang
André Almeida
Philipp Stanner
Mario Limonciello
Le Ma
Randy Dunlap
Shikang Fan
Boyuan Zhang
Pratap Nirujogi
Yiqing Yao
Vitaly Prosyak
Victor Skvortsov
Ramesh Errabolu
Jesse.zhang@amd.com
Victor Zhao
Dan Carpenter
Thomas Zimmermann
Dr. David Alan Gilbert
Asad Kamal
Bob Zhou
Christian König
Trigger Huang
Daniel Vetter
Rahul Jain