mirror of https://github.com/torvalds/linux.git
45181 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
a382b06d29 |
KVM/arm64 fixes for 6.14, take #4
* Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
x86:
* Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
* Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
* Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
* Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
* Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
* Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
* Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfNSeUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNKngf/cLgQAT9AF4nFqcwh5b5uucKHVJ8W
uTiGlWqLAf2UN53L63eZ/7vKQWGQYkOTFvormR14Jam6IYtytsZw1xLBH4fGtUyB
qVjk0EPzaKGqn3LrgyneQNCXdyxJv7EBVBgoOKH0pvOksoW2E5ZizhhtRFtL7nCE
Yk8FQKpP0mIBk04RMsvzJVEFKIb4OZgJadWo0gryg1oF2aAv7mxQjyqUWsBDsb3q
99c0ElSBfV39FeT8xeok4k7S5jbBWii2KiaH72ZsNiBu0rYmEuLwIoygCNNWL9Wu
FPdQ+r//YrzfCJSXwGPfdUaRaF4p2642S6oiXQuusNNUmhK6/MRo3mZo8A==
=XQHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
Paolo Bonzini
|
ea9bd29a9c |
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----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=as6u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
|
Linus Torvalds
|
1110ce6a1e |
33 hotfixes. 24 are cc:stable and the remainder address post-6.13 issues
or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ8zgnAAKCRDdBJ7gKXxA
jmTzAP9LsTIpkPkRXDpwxPR/Si5KPwOkE6sGj4ETEqbX3vUvcAEA/Lp7oafc7Vqr
XxlC1VFush1ZK29Tecxzvnapl2/VSAs=
=zBvY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
|
Linus Torvalds
|
2a520073e7 |
s390 updates for 6.14-rc6
- Fix return address recovery of traced function in ftrace to ensure reliable stack unwinding - Fix compiler warnings and runtime crashes of vDSO selftests on s390 by introducing a dedicated GNU hash bucket pointer with correct 32-bit entry size - Fix test_monitor_call() inline asm, which misses CC clobber, by switching to an instruction that doesn't modify CC -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfLedEACgkQjYWKoQLX FBhXMQf/bIaJEOV/Ww5PWY+AqtHPpQjhP2cvOfSRoh2py38Gp1sy/6ddpn8lcl3R skyeW4XHLpARYGg6NNOAOgFr43c7wQYrr+7uSW0zska+hOlSOi5TtycEOgu7o+VE Nig5XRuBPc01CBokFc+gbvMTjp2fTVlzTQ2/F/B7py62j2c21Y2/n7yZ4hhfQolM oiWlRDXzCRHM/sfa3FlML6sSgfIcHhhMSZLpdmRDhir9vBm1VpeGHa+FM5V8Pzsk KsiuoH7+ylbw+swVn2V/p3fqfS7JoopYdng8h40eLRkeHaTi052+NmMwv8gYAnCk BxfC1re5KlZ6kgWh0CDLUoYQHdwHxw== =KCjH -----END PGP SIGNATURE----- Merge tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix return address recovery of traced function in ftrace to ensure reliable stack unwinding - Fix compiler warnings and runtime crashes of vDSO selftests on s390 by introducing a dedicated GNU hash bucket pointer with correct 32-bit entry size - Fix test_monitor_call() inline asm, which misses CC clobber, by switching to an instruction that doesn't modify CC * tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: Fix return address recovery of traced function selftests/vDSO: Fix GNU hash table entry size for s390x s390/traps: Fix test_monitor_call() inline assembly |
|
SeongJae Park
|
582ccf78f6 |
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
damon_nr_regions.py starts DAMON, periodically collect number of regions
in snapshots, and see if it is in the requested range. The check code
assumes the numbers are sorted on the collection list, but there is no
such guarantee. Hence this can result in false positive test success.
Sort the list before doing the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-4-sj@kernel.org
Fixes:
|
|
|
SeongJae Park
|
695469c07a |
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes:
|
|
|
SeongJae Park
|
1c684d77df |
selftests/damon/damos_quota: make real expectation of quota exceeds
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes:
|
|
|
SeongJae Park
|
349db086a6 |
selftests/damon/damos_quota_goal: handle minimum quota that cannot be further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes:
|
|
John Hubbard
|
0a7565ee6e |
Revert "selftests/mm: remove local __NR_* definitions"
This reverts commit |
|
Thomas Weißschuh
|
a22ee38d2e |
selftests/vDSO: Fix GNU hash table entry size for s390x
Commit |
|
Sean Christopherson
|
3b2d3db368 |
KVM: selftests: Fix printf() format goof in SEV smoke test
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes:
|
|
|
Sean Christopherson
|
d88ed5fb7c |
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes:
|
|
|
Linus Torvalds
|
ad69e02128 |
Fix an objtool false positive, and objtool related
build warnings that happens on PIE-enabled architectures such as LoongArch. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfCCV0RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jHsA//RLrKlu/nvMO0l03s9ndWaunz0Nih/Z54 JJm4Ig+NLYY8VWLH+q6xfII8LT0oUeLh4OtmRj1vMhDbi2DnWozzDA1cvh6Fhyfj YG9Xgzej7ZPU43AVlItl80TbG/xfEdD5yxZx8WC6/WUI17XcpTkDC9/NG/NfrUjY 2a+A8nJk/qa/M+qCHf7ugDxMQFrOVRDDtdBSRAUbifqgygKO+AtXCIyeBfbtVkyV GEWusjO4lsyiY1dzG911h+ROIl/hp6Y3B940PSXyiwjs8JFJJplECnrnwROvRhTm xUDFeszEh40i6zHu2dzFf0up9vFCFZGpjzvMTc0Dt50i4Z3OxbxXW+Ust2YjpSms Ux+MHsH850UoXS/4QB7R2RJndqLTvsYkcu8uhOc2izVkWvTORba0+SMguKuTu1xI MDKozZxtH1DPCtMcZtNIgVlQEwsioKaHUS/PgXhdqw8+fg3ur9FEXp8Q2ubUm7XJ VJm6nF0RvFZNiIIDm81O1Z1RmmxUuAlAHWIOREaNzTSHu3ptBjBOtRrBTem2WAMa 9g1n4GoB7HI96TG36ik0/1oZhEAhawEwT/HhehVpPJyKNQooADYqhhPpfysyGJzq mp+oOdf0QYfD0+M4oqmEGN0fhIlNobK7ap2O+t7HPcJwO1Om3h6WCkyijixj6xPt cOuqhG+GKSk= =16p4 -----END PGP SIGNATURE----- Merge tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "Fix an objtool false positive, and objtool related build warnings that happens on PIE-enabled architectures such as LoongArch" * tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns objtool: Fix C jump table annotations for Clang vmlinux.lds: Ensure that const vars with relocations are mapped R/O |
|
|
Linus Torvalds
|
5c44ddaf7d |
Tracing fixes for v6.14:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry
in a link list that gets freed. Then when a new entry is added
it can cause a u-a-f bug. This is fixed by restructuring the code
so that the histogram is consistent on failure and everything is
cleaned up appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now
does so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly.
It counts the functions in the file, but if there's already functions
in the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of
the function times can overflow. If the overflow happens to land
on zero, that can cause a division by zero. Check for zero from
the calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly.
For now, just prevent the system from crashing.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ8HqYBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpoXAP90gvO2LfjItjZVjBYudr4GOzcsjAAK
cZ2vL2LJp3hT4QD+Kud2YaZqzrV8tvFFBikO7FvEV3zZpnw48895pIgcoww=
=NLe0
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
|
|
|
Sean Christopherson
|
f3513a335e |
KVM: selftests: Assert that STI blocking isn't set after event injection
Add an L1 (guest) assert to the nested exceptions test to verify that KVM doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the guest's int_state if a #VMEXIT occurs before VMRUN fully completes). Add a similar assert to the VMX side as well, because why not. Reviewed-by: Jim Mattson <jmattson@google.com> Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Heiko Carstens
|
3908b6baf2 |
selftests/ftrace: Let fprobe test consider already enabled functions
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes:
|
|
|
Linus Torvalds
|
1e15510b71 |
Including fixes from bluetooth. We didn't get netfilter or wireless PRs
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
|
Linus Torvalds
|
f09d694cf7 |
sound fixes for 6.14-rc5
A collection of fixes. The only slightly large change is for ASoC Cirrus codec, but that's still in a normal range. All the rest are small device-specific fixes and should be fairly safe to take. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmfAkMUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/GpxAAzClmQQKKzYBdKkmV8A42R9Vvr1jv1lZCshfR VseHMkbDhnnDpV/doj7dW5oj5juSuBdehpmcTeBTME3H+cNKrkGH19dxI86Y7rwb ED1nOHWT7xNFaJmSsRFGDOY8H1FjXYKchN6vPKZKTKVqemtT1XWOwJjCKzDlNcjj y1TnjwnkS5ESbT8uYVnjImoO7t3IfXq8NcjTbu2VwEJtngbjDdRZKep2w6rIMyQ9 MG3pqcV5DPFjlRYNwjEqIcqpHhLR/d7N/i0Qe2akg5cViCRGRtuavozT+YiBw49a 30RctZyekiakGochh507fkhRv9Hmg+VxFFw1JlE2hwTCVjzB0xgijNzcDvxbk3eU bnRu+8BThQv2MHoQalobQ+4+RM9YRxJAq9Vbo3W6yxl6MU1AH8jhv26Ax+gH1cbf gea7FYCOFR2tziVIqfWS83i7ACw4JxT1ASIRJqlw80y7uZsszTcX3NcX+xHWI6wj L69NLUBHjktIzdWFJLGSJTg2sszJNiHm11mqN8ASikQjtA0P4hP1w4soDYFGx4Ti QHJFQF+ifU0t2tNbAr75tuegzL4Zk34w0vVgJslxTwJtMG+UXS7bdzDXqz/49xE8 m4alSRtANOF2t1sbZid76QFv4emvykkMhpnh3m8uz8svLwmACID7gMhx/IT+MKzo fovA7AQ= =i1Wa -----END PGP SIGNATURE----- Merge tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes. The only slightly large change is for ASoC Cirrus codec, but that's still in a normal range. All the rest are small device-specific fixes and should be fairly safe to take" * tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Fix microphone regression on ASUS N705UD ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15 ASoC: cs35l56: Prevent races when soft-resetting using SPI control firmware: cs_dsp: Remove async regmap writes ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup ASoC: dapm-graph: set fill colour of turned on nodes ASoC: fsl: Rename stream name of SAI DAI driver ASoC: es8328: fix route from DAC to output ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2 ASoC: tas2764: Set the SDOUT polarity correctly ASoC: tas2764: Fix power control mask ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports ASoC: tas2770: Fix volume scale |
|
Joe Damato
|
1cbddbddee |
selftests: drv-net: Check if combined-count exists
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes:
|
|
|
Linus Torvalds
|
c0d35086a2 |
Landlock fix for v6.14-rc5
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZ785FhAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSILQBAMFwpFClzjVeWyLFNd/gaTlPWeedvnag+yZu CK9q39jOAP9tj1unQBFpsI7jsTk6ZxPVxb4DymPIirZMb/5FuxUnDQ== =QrSM -----END PGP SIGNATURE----- Merge tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fixes from Mickaël Salaün: "Fixes to TCP socket identification, documentation, and tests" * tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add binaries to .gitignore selftests/landlock: Test that MPTCP actions are not restricted selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP landlock: Fix non-TCP sockets restriction landlock: Minor typo and grammar fixes in IPC scoping documentation landlock: Fix grammar error selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB |
|
|
Linus Torvalds
|
9f5270d758 |
perf tools fixes for v6.14: 2nd batch
- Fix tools/ quiet build Makefile infrastructure that was broken when working on tools/perf/ without testing on other tools/ living utilities. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZ74OJwAKCRCyPKLppCJ+ J30mAPsHCA8A+CNq/5yW2VhFLV1GgCSL5oWqxXRn7QjhSrCQBQEAot2u4O5zXs7M sg+mPlYiS1oT+zmvTLlXrN+bVyWP9A4= =jH1N -----END PGP SIGNATURE----- Merge tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix tools/ quiet build Makefile infrastructure that was broken when working on tools/perf/ without testing on other tools/ living utilities. * tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: tools: Remove redundant quiet setup tools: Unify top-level quiet infrastructure |
|
Youling Tang
|
b4ae43b053 |
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
Fix the following objtool warning during build time:
fs/bcachefs/btree_cache.o: warning: objtool: btree_node_lock.constprop.0() falls through to next function bch2_recalc_btree_reserve()
fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function need_whiteout_for_snapshot()
bch2_trans_unlocked_or_in_restart_error() is an Obviously Correct (tm)
panic() wrapper, add it to the list of known noreturns.
Fixes:
|
|
Ard Biesheuvel
|
73cfc53cc3 |
objtool: Fix C jump table annotations for Clang
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
|
|
|
Linus Torvalds
|
2a1944bff5 |
RISC-V Fixes for 6.14-rc5
* A fix for cacheinfo DT probing to avoid reading non-boolean properties
as booleans.
* A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
* Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
* A fix for the rseq selftests, which was using an invalid constraint.
* A pair of fixes for signal frame size handling:
* We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
* We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
-----BEGIN PGP SIGNATURE-----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=+DfW
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
|
|
Jakub Kicinski
|
29b036be1b |
selftests: drv-net: test XDP, HDS auto and the ioctl path
Test XDP and HDS interaction. While at it add a test for using the IOCTL, as that turned out to be the real culprit. Testing bnxt: # NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py KTAP version 1 1..12 ok 1 hds.get_hds ok 2 hds.get_hds_thresh ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device ok 4 hds.set_hds_enable ok 5 hds.set_hds_thresh_zero ok 6 hds.set_hds_thresh_max ok 7 hds.set_hds_thresh_gt ok 8 hds.set_xdp ok 9 hds.enabled_set_xdp ok 10 hds.ioctl ok 11 hds.ioctl_set_xdp ok 12 hds.ioctl_enabled_set_xdp # Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0 and netdevsim: # ./ksft-net-drv/drivers/net/hds.py KTAP version 1 1..12 ok 1 hds.get_hds ok 2 hds.get_hds_thresh ok 3 hds.set_hds_disable ok 4 hds.set_hds_enable ok 5 hds.set_hds_thresh_zero ok 6 hds.set_hds_thresh_max ok 7 hds.set_hds_thresh_gt ok 8 hds.set_xdp ok 9 hds.enabled_set_xdp ok 10 hds.ioctl ok 11 hds.ioctl_set_xdp ok 12 hds.ioctl_enabled_set_xdp # Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0 Netdevsim needs a sane default for tx/rx ring size. ethtool 6.11 is needed for the --disable-netlink option. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Nicolas Frattaroli
|
d31babd7e3
|
ASoC: dapm-graph: set fill colour of turned on nodes
Some tools like KGraphViewer interpret the "ON" nodes not having an explicitly set fill colour as them being entirely black, which obscures the text on them and looks funny. In fact, I thought they were off for the longest time. Comparing to the output of the `dot` tool, I assume they are supposed to be white. Instead of speclawyering over who's in the wrong and must immediately atone for their wickedness at the altar of RFC2119, just be explicit about it, set the fillcolor to white, and nobody gets confused. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20250221-dapm-graph-node-colour-v1-1-514ed0aa7069@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Linus Torvalds
|
b8c8c1414f |
tracing fixes for v6.14:
Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to ftrace.
The manager ops does not have any callback but calls the sub-ops
callbacks. The manage ops hashes (what is used to tell ftrace what
functions to attach to) is built on the sub-ops it manages.
There was an error in the way it built the hash. An empty hash means to
attach to all functions. When the manager ops had one sub-ops it properly
copied its hash. But when the manager ops had more than one sub-ops, it
went into a loop to make a set of all functions it needed to add to the
hash. If any of the subops hashes was empty, that would mean to attach
to all functions. The error was that the first iteration of the loop
passed in an empty hash to start with in order to add the other hashes.
That starting hash was mistaken as to attach to all functions. This made
the manage ops attach to all functions whenever it had two or more
sub-ops, even if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for that
function will be added to the manager ops for each subops. This causes
waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is attached
to. It also has a counter of how many fprobes are attached. When the last
fprobe is removed, it unregisters the fprobe from ftrace but does not
remove the functions the last fprobe was attached to from the hash. This
leaves the old functions attached. When a new fprobe is added, the fprobe
infrastructure attaches to not only the functions of the new fprobe, but
also to the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes from
zero to one, it attaches its ops to ftrace. When an fprobe is removed, the
counter is decremented. If the counter goes from 1 to zero, it removes the
fprobes ops from ftrace. There was an issue where if two fprobes trace the
same function, the addition of each fprobe would increment the counter.
But when removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not remove
the functions from the ftrace ops. But it also did not decrement the
counter. When the last fprobe is removed, the counter is still one. This
leaves the fprobes callback still registered with ftrace and it being
called by the functions defined by the fprobes ops hash. Worse yet,
because all the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions. Thus, this puts the
state of the system where every function is calling the fprobe callback
handler (which does nothing as there are no registered fprobes), but this
causes a good 13% slow down of the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which added
another layer of preempt disable. As the preempt_count gets traced in the
event, it needs to subtract the amount of preempt disabling the tracer
does to record what the preempt_count was when the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that is
set by the return of the next() function. The start() function allocates
it and the stop() function frees it. But when the last item is found, the
next() returns NULL which leaks the data that was allocated in start().
The m->private is used for something else, so have next() free the data
when it returns NULL, as stop() will then just receive NULL in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7j6ARQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quFxAQDrO8tjYbhLqg/LMOQyzwn/EF3Jx9ub
87961mA0rKTkYwEAhPNzTZ6GwKyKc4ny/R338KgNY69wWnOK6k/BTxCRmwk=
=TOah
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
|
|
Steven Rostedt
|
e85c5e9792 |
selftests/ftrace: Update fprobe test to check enabled_functions file
A few bugs were found in the fprobe accounting logic along with it using the function graph infrastructure. Update the fprobe selftest to catch those bugs in case they or something similar shows up in the future. The test now checks the enabled_functions file which shows all the functions attached to ftrace or fgraph. When enabling a fprobe, make sure that its corresponding function is also added to that file. Also add two more fprobes to enable to make sure that the fprobe logic works properly with multiple probes. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
|
|
Linus Torvalds
|
319fc77f8f |
BPF fixes:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels (Alan Maguire) - Fix a missing allocation failure check in BPF verifier's acquire_lock_state (Kumar Kartikeya Dwivedi) - Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima) - Fix a deadlock when freeing BPF cgroup storage (Abel Wu) - Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex (Andrii Nakryiko) - Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is accessing skb data not containing an Ethernet header (Shigeru Yoshida) - Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai) - Several BPF sockmap fixes to address incorrect TCP copied_seq calculations, which prevented correct data reads from recv(2) in user space (Jiayuan Chen) - Two fixes for BPF map lookup nullness elision (Daniel Xu) - Fix a NULL-pointer dereference from vmlinux BTF lookup in bpf_sk_storage_tracing_allowed (Jared Kangas) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD =FCs9 -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull BPF fixes from Daniel Borkmann: - Fix a soft-lockup in BPF arena_map_free on 64k page size kernels (Alan Maguire) - Fix a missing allocation failure check in BPF verifier's acquire_lock_state (Kumar Kartikeya Dwivedi) - Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima) - Fix a deadlock when freeing BPF cgroup storage (Abel Wu) - Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex (Andrii Nakryiko) - Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is accessing skb data not containing an Ethernet header (Shigeru Yoshida) - Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai) - Several BPF sockmap fixes to address incorrect TCP copied_seq calculations, which prevented correct data reads from recv(2) in user space (Jiayuan Chen) - Two fixes for BPF map lookup nullness elision (Daniel Xu) - Fix a NULL-pointer dereference from vmlinux BTF lookup in bpf_sk_storage_tracing_allowed (Jared Kangas) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests: bpf: test batch lookup on array of maps with holes bpf: skip non exist keys in generic_map_lookup_batch bpf: Handle allocation failure in acquire_lock_state bpf: verifier: Disambiguate get_constant_map_key() errors bpf: selftests: Test constant key extraction on irrelevant maps bpf: verifier: Do not extract constant map keys for irrelevant maps bpf: Fix softlockup in arena_map_free on 64k page kernel net: Add rx_skb of kfree_skb to raw_tp_null_args[]. bpf: Fix deadlock when freeing cgroup storage selftests/bpf: Add strparser test for bpf selftests/bpf: Fix invalid flag of recv() bpf: Disable non stream socket for strparser bpf: Fix wrong copied_seq calculation strparser: Add read_sock callback bpf: avoid holding freeze_mutex during mmap operation bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic selftests/bpf: Adjust data size to have ETH_HLEN bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type() bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed |
|
|
Linus Torvalds
|
27eddbf344 |
Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev)).
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth: geneve: fix use-after-free in geneve_find_dev().
- eth: ibmvnic: don't reference skb after sending to VIOS
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pEjU
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
|
|
Cong Wang
|
15de6ba95d |
selftests/bpf: Add a specific dst port matching
After this patch: #102/1 flow_dissector_classification/ipv4:OK #102/2 flow_dissector_classification/ipv4_continue_dissect:OK #102/3 flow_dissector_classification/ipip:OK #102/4 flow_dissector_classification/gre:OK #102/5 flow_dissector_classification/port_range:OK #102/6 flow_dissector_classification/ipv6:OK #102 flow_dissector_classification:OK Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250218043210.732959-5-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Cong Wang
|
dfc1580f96 |
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
After this patch: # ./tc_flower_port_range.sh TEST: Port range matching - IPv4 UDP [ OK ] TEST: Port range matching - IPv4 TCP [ OK ] TEST: Port range matching - IPv6 UDP [ OK ] TEST: Port range matching - IPv6 TCP [ OK ] TEST: Port range matching - IPv4 UDP Drop [ OK ] Cc: Qiang Zhang <dtzq01@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Yan Zhai
|
d66b773917 |
selftests: bpf: test batch lookup on array of maps with holes
Iterating through array of maps may encounter non existing keys. The batch operation should not fail on when this happens. Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/9007237b9606dc2ee44465a4447fe46e13f3bea6.1739171594.git.yan@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
Charlie Jenkins
|
42367eca76 |
tools: Remove redundant quiet setup
Q is exported from Makefile.include so it is not necessary to manually set it. Reviewed-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <qmo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Benjamin Tissoires <bentiss@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Mykola Lysenko <mykolal@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yonghong Song <yonghong.song@linux.dev> Cc: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Charlie Jenkins
|
293f324ce9 |
tools: Unify top-level quiet infrastructure
Commit |
|
Michal Luczaj
|
85928e9c43 |
selftest/bpf: Add vsock test for sockmap rejecting unconnected
Verify that for a connectible AF_VSOCK socket, merely having a transport assigned is insufficient; socket must be connected for the sockmap to accept. This does not test datagram vsocks. Even though it hardly matters. VMCI is the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an unimplemented vsock_transport::readskb() callback, making it unsupported by BPF/sockmap. Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
|
|
Michal Luczaj
|
8350695bfb |
selftest/bpf: Adapt vsock_delete_on_close to sockmap rejecting unconnected
Commit
|
|
Mark Brown
|
5dcf52e2ce |
selftests/mm: fix check for running THP tests
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org
Fixes:
|
|
Wang Yaxin
|
2272dbc471 |
getdelays: fix error format characters
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes:
|
|
Florian Fainelli
|
035d3c7787 |
tools/mm: fix build warnings with musl-libc
musl-libc warns about the following:
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/errno.h:1:2: attention: #warning redirecting incorrect #include <sys/errno.h> to <errno.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
| ^~~~~~~
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/fcntl.h:1:2: attention: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
include errno.h and fcntl.h directly.
Link: https://lkml.kernel.org/r/20250210200518.1137295-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
Linus Torvalds
|
592c358ea9 |
- Move a warning about a lld.ld breakage into the verbose setting as said
breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmexqKkACgkQEsHwGGHe VUpaaw/+Pl6iTpZMXmL3uygZpgWR2QgBHIKcwFF9RcVpRDQ19PlSfSpmb2PL2jOf aKoAWq7MiVo2+yMguXYUj4vn8c+I0bBEQvlseUsYzVOiW3RBK1y39K1HZxCX6r3T y/kpXix25Bjs323cxS73U5gmoW6Wpqi/gFVBljXrLlugtqgXJhUXWCpVTL8lkzuH jLkc9pGGt7UAnOWBsKy3FQNZVy4lz6KC9nlYc6dSbAE5dmldBujBVtr9R8GfNxhe K7L5kiKk50rQmlYfZ8aS2ExG+W4EzInU5QHVS6DMsyEU5a3PS/WxYLFQOibjbcM7 7b8SccJGyNsZLaseNMk2Eud5FDcdGFNH2/wFd/hpVxq5Mrfh2iyG9ADzqtWMFz/6 xt0cc4C56v3tS+m1ticahjkB5l/DlvqLe/N2EVNR+15lIdxoTfeRZSoJlo/o1liu G/nZxDQssr57vmALal6b5js6XRrHqsCQVAN9Y9k6TMPcFYbq4B7YHyTe4Q12ChIg BRu/FJJFNjiC6c7QvJ7U/QNpDT3OPrI5Bp4BRGt+Yn7aujtnxUIAgI5+caEe+ASQ 8DEeLwzfMqUTVSeiUeAPrjN9ep0qox7051GqCsQflJqZ7FH321lhrps66kfkDKR8 3c6hr2SyzLzRsBNnTSliVV9OJHrQS/0psQwyuvIEN6mEh/EAk0A= =fVLM -----END PGP SIGNATURE----- Merge tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Move a warning about a lld.ld breakage into the verbose setting as said breakage has been fixed in the meantime - Teach objtool to ignore dangling jump table entries added by Clang * tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Move dodgy linker warn to verbose objtool: Ignore dangling jump table entries |
|
|
Linus Torvalds
|
82ff316456 |
ARM:
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
|
Linus Torvalds
|
243899076c |
Rust fixes for v6.14 (2nd)
Toolchain and infrastructure:
- Fix objtool warning due to future Rust 1.85.0 (to be released in
a few days).
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning.
-----BEGIN PGP SIGNATURE-----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=98Tv
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
|
|
Stafford Horne
|
713e788c0e
|
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes:
|
|
|
Linus Torvalds
|
04f41cbf03 |
sched_ext: Fixes for v6.14-rc2
- Fix lock imbalance in a corner case of dispatch_to_local_dsq(). - Migration disabled tasks were confusing some BPF schedulers and its handling had a bug. Fix it and simplify the default behavior by dispatching them automatically. - ops.tick(), ops.disable() and ops.exit_task() were incorrectly disallowing kfuncs that require the task argument to be the rq operation is currently operating on and thus is rq-locked. Allow them. - Fix autogroup migration handling bug which was occasionally triggering a warning in the cgroup migration path. - tools/sched_ext, selftest and other misc updates. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ695uA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGeCfAQDmUixMNJCIrRphYsWcYUzlGLZyyRpQEEYFtRMO UC266gD+PUV2UvuO5sAVH8HVnGdOqkXaE/IRG+TC7fQH3ruPlgI= =LFd1 -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Fix lock imbalance in a corner case of dispatch_to_local_dsq() - Migration disabled tasks were confusing some BPF schedulers and its handling had a bug. Fix it and simplify the default behavior by dispatching them automatically - ops.tick(), ops.disable() and ops.exit_task() were incorrectly disallowing kfuncs that require the task argument to be the rq operation is currently operating on and thus is rq-locked. Allow them. - Fix autogroup migration handling bug which was occasionally triggering a warning in the cgroup migration path - tools/sched_ext, selftest and other misc updates * tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h. sched_ext: selftests: Fix grammar in tests description sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq() sched_ext: Fix migration disabled handling in targeted dispatches sched_ext: Implement auto local dispatching of migration disabled tasks sched_ext: Fix incorrect time delta calculation in time_delta() sched_ext: Fix lock imbalance in dispatch_to_local_dsq() sched_ext: selftests/dsp_local_on: Fix selftest on UP systems tools/sched_ext: Add helper to check task migration state sched_ext: Fix incorrect autogroup migration detection sched_ext: selftests/dsp_local_on: Fix sporadic failures selftests/sched_ext: Fix enum resolution sched_ext: Include task weight in the error state dump sched_ext: Fixes typos in comments |
|
|
Linus Torvalds
|
80868f5d3d |
cgroup: Fixes for v6.14-rc2
- Fix a race window where a newly forked task could escape cgroup.kill. - Remove incorrectly included steal time from cpu.stat::usage_usec. - Minor update in selftest. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ6928A4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGYrbAPsEtoH5GFw7VtKIy4fS23QbtxUuwW0fERrPWGyt JtQv3gD5AboBUrGWdgiM5c2bIXT3f+Bn9w3HhLiPaB8ieN/0kA8= =3BBH -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix a race window where a newly forked task could escape cgroup.kill - Remove incorrectly included steal time from cpu.stat::usage_usec - Minor update in selftest * tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Remove steal time from usage_usec selftests/cgroup: use bash in test_cpuset_v1_hp.sh cgroup: fix race between fork and cgroup.kill |
|
Bharadwaj Raju
|
78332fdb95
|
selftests/landlock: Add binaries to .gitignore
Building the test creates binaries 'wait-pipe' and 'sandbox-and-launch' which need to be gitignore'd. Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com> Link: https://lore.kernel.org/r/20250210161101.6024-1-bharadwaj.raju777@gmail.com [mic: Sort entries] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
|
Mikhail Ivanov
|
3d4033985f
|
selftests/landlock: Test that MPTCP actions are not restricted
Extend protocol fixture with test suits for MPTCP protocol. Add CONFIG_MPTCP and CONFIG_MPTCP_IPV6 options in config. Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com> Link: https://lore.kernel.org/r/20250205093651.1424339-4-ivanov.mikhail1@huawei-partners.com Cc: <stable@vger.kernel.org> # 6.7.x Signed-off-by: Mickaël Salaün <mic@digikod.net> |
|
|
Mikhail Ivanov
|
f5534d511b
|
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
Extend protocol_variant structure with protocol field (Cf. socket(2)). Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP which can be used as an alias for IPPROTO_IP (=0) in socket(2). Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com> Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com Cc: <stable@vger.kernel.org> # 6.7.x Signed-off-by: Mickaël Salaün <mic@digikod.net> |
|
Mickaël Salaün
|
89cb121e94
|
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Since commit
|