It is needed to remove the BPF_STRUCT_OPS usages from the tcp-cc tests
because it is defined in bpf_tcp_helpers.h which is going to be retired.
While at it, this patch consolidates all tcp-cc struct_ops programs to
use the SEC("struct_ops") + BPF_PROG().
It also removes the unnecessary __always_inline usages from the
tcp-cc tests.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch removes the individual tcp_sk implementations from the
tcp-cc tests. The tcp_sk() implementation from the bpf_tracing_net.h
is reused instead.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a few tcp related helper functions to bpf_tracing_net.h.
They will be useful for both tcp-cc and network tracing related
bpf progs. They have already been in the bpf_tcp_helpers.h. This change
is needed to retire the bpf_tcp_helpers.h and consolidate all tests
to vmlinux.h (i.e. bpf_tracing_net.h).
Some of the helpers (tcp_sk and inet_csk) are also defined in
bpf_cc_cubic.c and they are removed. While at it, remove
the vmlinux.h from bpf_cc_cubic.c. bpf_tracing_net.h (which has
vmlinux.h after this patch) is enough and will be consistent
with the other tcp-cc tests in the later patches.
The other TCP_* macro additions will be needed for the bpf_dctcp
changes in the later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch removes the bpf_tracing_net.h usage from the networking tests,
fib_lookup and test_lwt_redirect. Instead of using the (copied) macro
TC_ACT_SHOT and ETH_HLEN from bpf_tracing_net.h, they can directly
use the ones defined in the network header files under linux/.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[Changes from V2:
- no-strict-aliasing is only applied when building with GCC.
- cpumask_failure.c is excluded, as it doesn't use __imm_insn.]
The __imm_insn macro is defined in bpf_misc.h as:
#define __imm_insn(name, expr) [name]"i"(*(long *)&(expr))
This may lead to type-punning and strict aliasing rules violations in
it's typical usage where the address of a struct bpf_insn is passed as
expr, like in:
__imm_insn(st_mem,
BPF_ST_MEM(BPF_W, BPF_REG_1, offsetof(struct __sk_buff, mark), 42))
Where:
#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \
((struct bpf_insn) { \
.code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \
.dst_reg = DST, \
.src_reg = 0, \
.off = OFF, \
.imm = IMM })
In all the actual instances of this in the BPF selftests the value is
fed to a volatile asm statement as soon as it gets read from memory,
and thus it is unlikely anti-aliasing rules breakage may lead to
misguided optimizations.
However, GCC detects the potential problem (indirectly) by issuing a
warning stating that a temporary <Uxxxxxx> is used uninitialized,
where the temporary corresponds to the memory read by *(long *).
This patch adds -fno-strict-aliasing to the compilation flags of the
particular selftests that do type punning via __imm_insn, only for
GCC.
Tested in master bpf-next.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240508103551.14955-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[Changes from V1:
- The warning to disable is -Wmaybe-uninitialized, not -Wuninitialized.
- This warning is only supported in GCC.]
The BPF selftest verifier_global_subprogs.c contains code that
purposedly performs out of bounds access to memory, to check whether
the kernel verifier is able to catch them. For example:
__noinline int global_unsupp(const int *mem)
{
if (!mem)
return 0;
return mem[100]; /* BOOM */
}
With -O1 and higher and no inlining, GCC notices this fact and emits a
"maybe uninitialized" warning. This is by design. Note that the
emission of these warnings is highly dependent on the precise
optimizations that are performed.
This patch adds a compiler pragma to verifier_global_subprogs.c to
ignore these warnings.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240507184756.1772-1-jose.marchesi@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When LSE atomics are available, BPF atomic instructions are implemented
as single ARM64 atomic instructions, therefore it is easy to enable
these in bpf_arena using the currently available exception handling
setup.
LL_SC atomics use loops and therefore would need more work to enable in
bpf_arena.
Enable LSE atomics based instructions in bpf_arena and use the
bpf_jit_supports_insn() callback to reject atomics in bpf_arena if LSE
atomics are not available.
All atomics and arena_atomics selftests are passing:
[root@ip-172-31-2-216 bpf]# ./test_progs -a atomics,arena_atomics
#3/1 arena_atomics/add:OK
#3/2 arena_atomics/sub:OK
#3/3 arena_atomics/and:OK
#3/4 arena_atomics/or:OK
#3/5 arena_atomics/xor:OK
#3/6 arena_atomics/cmpxchg:OK
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
#10/1 atomics/add:OK
#10/2 atomics/sub:OK
#10/3 atomics/and:OK
#10/4 atomics/or:OK
#10/5 atomics/xor:OK
#10/6 atomics/cmpxchg:OK
#10/7 atomics/xchg:OK
#10 atomics:OK
Summary: 2/14 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20240426161116.441-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a simple test that validates that libbpf will reject isolated
struct_ops program early with helpful warning message.
Also validate that explicit use of such BPF program through BPF skeleton
after BPF object is open won't trigger any warnings.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-7-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test which tests the case that was just fixed. Kernel has full
type information about callback, but user explicitly nulls out the
reference to declaratively set BPF program reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-4-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The test_xdp_noinline.c contains 2 functions that use more then 5
arguments. This patch collapses the 2 last arguments in an array.
Also in GCC and ipa_sra optimization increases the number of arguments
used in function encap_v4. This pass disables the optimization for that
particular file.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-3-cupertino.miranda@oracle.com
This patch adds support to specify CFLAGS per source file and per test
runner.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-2-cupertino.miranda@oracle.com
The vmlinux.h file generated by bpftool makes use of compiler pragmas
in order to install the CO-RE preserve_access_index in all the struct
types derived from the BTF info:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_t = record
#endif
[... type definitions generated from kernel BTF ... ]
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute pop
#endif
The `clang attribute push/pop' pragmas are specific to clang/llvm and
are not supported by GCC.
At the moment the BTF dumping services in libbpf do not support
dicriminating between types dumped because they are directly referred
and types dumped because they are dependencies. A suitable API is
being worked now. See [1] and [2].
In the interim, this patch changes the selftests/bpf Makefile so it
passes -DBPF_NO_PRESERVE_ACCESS_INDEX to GCC when it builds the
selftests. This workaround is temporary, and may have an impact on
the results of the GCC-built tests.
[1] https://lore.kernel.org/bpf/20240503111836.25275-1-jose.marchesi@oracle.com/T/#u
[2] https://lore.kernel.org/bpf/20240504205510.24785-1-jose.marchesi@oracle.com/T/#u
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507095011.15867-1-jose.marchesi@oracle.com
This patch modifies selftests/bpf/Makefile to pass -Wno-attributes to
GCC. This is because of the following attributes which are ignored:
- btf_decl_tag
- btf_type_tag
There are many of these. At the moment none of these are
recognized/handled by gcc-bpf.
We are aware that btf_decl_tag is necessary for some of the
selftest harness to communicate test failure/success. Support for
it is in progress in GCC upstream:
https://gcc.gnu.org/pipermail/gcc-patches/2024-May/650482.html
However, the GCC master branch is not yet open, so the series
above (currently under review upstream) wont be able to make it
there until 14.1 gets released, probably mid next week.
As for btf_type_tag, more extensive work will be needed in GCC
upstream to support it in both BTF and DWARF. We have a WIP big
patch for that, but that is not needed to compile/build the
selftests.
- used
There are SEC macros defined in the selftests as:
#define SEC(N) __attribute__((section(N),used))
The SEC macro is used for both functions and global variables.
According to the GCC documentation `used' attribute is really only
meaningful for functions, and it warns when the attribute is used
for other global objects, like for example ctl_array in
test_xdp_noinline.c.
Ignoring this is benign.
- align_value
In progs/test_cls_redirect.c:127 there is:
typedef uint8_t *net_ptr __attribute__((align_value(8)));
GCC warns that it is ignoring this attribute, because it is not
implemented by GCC.
I think ignoring this attribute in GCC is benign, because according
to the clang documentation [1] its purpose seems to be merely
declarative and doesn't seem to translate into extra checks at
run-time, only to perhaps better optimized code ("runtime behavior
is undefined if the pointed memory object is not aligned to the
specified alignment").
[1] https://clang.llvm.org/docs/AttributeReference.html#align-value
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-3-jose.marchesi@oracle.com
An object defined as `static' defaults to hidden visibility. If
additionally the visibility(__weak__) compiler attribute is applied to
the declaration of the object, GCC warns that the attribute gets
ignored.
This patch removes the only instance of this problem among the BPF
selftests.
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-2-jose.marchesi@oracle.com
Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-7-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-5-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cast operation has a higher precedence than addition. The code here
wants to zero the 2nd half of the 64-bit metadata, but due to a pointer
arithmetic mistake, it writes the zero at offset 16 instead.
Just adding parentheses around "data + 4" would fix this, but I think
this will be slightly better readable with array syntax.
I was unable to test this with tools/testing/selftests/bpf/vmtest.sh,
because my glibc is newer than glibc in the provided VM image.
So I just checked the difference in the compiled code.
objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o:
- *((__u32 *)data) = 0x42; /* metadata test value */
+ ((__u32 *)data)[0] = 0x42; /* metadata test value */
be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
bee: c7 00 42 00 00 00 movl $0x42,(%rax)
- *((__u32 *)data + 4) = 0;
+ ((__u32 *)data)[1] = 0;
bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
- bfb: 48 83 c0 10 add $0x10,%rax
+ bfb: 48 83 c0 04 add $0x4,%rax
bff: c7 00 00 00 00 00 movl $0x0,(%rax)
Fixes: 5640b6d894 ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20240506145023.214248-1-mschmidt@redhat.com
The bpf programs that this patch changes require the BPF_PROG macro.
The BPF_PROG macro is defined in the libbpf's bpf_tracing.h.
Some tests include bpf_tcp_helpers.h which includes bpf_tracing.h.
They don't need other things from bpf_tcp_helpers.h other than
bpf_tracing.h. This patch simplifies it by directly including
the bpf_tracing.h.
The motivation of this unnecessary code churn is to retire
the bpf_tcp_helpers.h by directly using vmlinux.h. Right now,
the main usage of the bpf_tcp_helpers.h is the partial kernel
socket definitions (e.g. socket, sock, tcp_sock). While the test
cases continue to grow, fields are kept adding to those partial
socket definitions (e.g. the recent bpf_cc_cubic.c test which
tried to extend bpf_tcp_helpers.c but eventually used the
vmlinux.h instead).
The idea is to retire bpf_tcp_helpers.c and consistently use
vmlinux.h for the tests that require the kernel sockets. This
patch tackles the obvious tests that can directly use bpf_tracing.h
instead of bpf_tcp_helpers.h.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240504005045.848376-1-martin.lau@linux.dev
This patch adds a selftest to show the usage of the new arguments in
cong_control. For simplicity's sake, the testing example reuses cubic's
kernel functions.
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-4-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch creates two sets of sock_ops that call out to the SYSCALL
hooks in the sock_addr_kern BPF program and uses them to construct
test cases for the range of supported operations (kernel_connect(),
kernel_bind(), kernel_sendms(), sock_sendmsg(), kernel_getsockname(),
kenel_getpeername()). This ensures that these interact with BPF sockaddr
hooks as intended.
Beyond this it also ensures that these operations do not modify their
address parameter, providing regression coverage for the issues
addressed by this set of patches:
- commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect")
- commit 86a7e0b69bd5("net: prevent rewrite of msg_name in sock_sendmsg()")
- commit c889a99a21bf("net: prevent address rewrite in kernel_bind()")
- commit 01b2885d9415("net: Save and restore msg_namelen in sock_sendmsg")
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-7-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In order to reuse the same test code for both socket system calls (e.g.
connect(), bind(), etc.) and kernel socket functions (e.g.
kernel_connect(), kernel_bind(), etc.), this patch introduces the "ops"
field to sock_addr_test. This field allows each test cases to configure
the set of functions used in the test case to create, manipulate, and
tear down a socket.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-6-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch lays the groundwork for testing IPv4 and IPv6 sockaddr hooks
and their interaction with both socket syscalls and kernel functions
(e.g. kernel_connect, kernel_bind, etc.). It moves some of the test
cases from the old-style bpf/test_sock_addr.c self test into the
sock_addr prog_test in a step towards fully retiring
bpf/test_sock_addr.c. We will expand the test dimensions in the
sock_addr prog_test in a later patch series in order to migrate the
remaining test cases.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-5-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch lays out a set of SYSCALL programs that can be used to invoke
the socket operation kfuncs in bpf_testmod, allowing a test program to
manipulate kernel socket operations from userspace.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-4-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a set of kfuncs to bpf_testmod that can be used to
manipulate a socket from kernel space.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-3-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Without this fix, the bind4 and bind6 programs will reject bind attempts
on big endian systems. This patch ensures that CI tests pass for the
s390x architecture.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-2-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tools/lib/bpf/Makefile assumes that the patch in OUTPUT is a directory
and that it includes a trailing slash. This seems to be a common
expectation for OUTPUT among all the Makefiles.
In the rule for runqslower in tools/testing/selftests/bpf/Makefile the
variable BPFTOOL_OUTPUT is set to a directory name that lacks a
trailing slash. This results in a malformed BPF_HELPER_DEFS being
defined in lib/bpf/Makefile.
This problem becomes evident when a file like
tools/lib/bpf/bpf_tracing.h gets updated.
This patch fixes the problem by adding the missing slash in the value
for BPFTOOL_OUTPUT in the $(OUTPUT)/runqslower rule.
Regtested by running selftests in bpf-next master and building
samples/bpf programs.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502140831.23915-1-jose.marchesi@oracle.com
Previous attempt to fix the handling of nulled-out (from skeleton)
struct_ops program is working well only if struct_ops program is defined
as non-autoloaded by default (i.e., has SEC("?struct_ops") annotation,
with question mark).
Unfortunately, that fix is incomplete due to how
bpf_object_adjust_struct_ops_autoload() is marking referenced or
non-referenced struct_ops program as autoloaded (or not). Because
bpf_object_adjust_struct_ops_autoload() is run after
bpf_map__init_kern_struct_ops() step, which sets program slot to NULL,
such programs won't be considered "referenced", and so its autoload
property won't be changed.
This all sounds convoluted and it is, but the desire is to have as
natural behavior (as far as struct_ops usage is concerned) as possible.
This fix is redoing the original fix but makes it work for
autoloaded-by-default struct_ops programs as well. We achieve this by
forcing prog->autoload to false if prog was declaratively set for some
struct_ops map, but then nulled-out from skeleton (programmatically).
This achieves desired effect of not autoloading it. If such program is
still referenced somewhere else (different struct_ops map or different
callback field), it will get its autoload property adjusted by
bpf_object_adjust_struct_ops_autoload() later.
We also fix selftest, which accidentally used SEC("?struct_ops")
annotation. It was meant to use autoload-by-default program from the
very beginning.
Fixes: f973fccd43 ("libbpf: handle nulled-out program in struct_ops correctly")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240501041706.3712608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The previous patch added support for the "module:function" syntax for
tracing programs. This adds tests for explicitly specifying the module
name via the SEC macro and via the bpf_program__set_attach_target call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8a076168ed847f7c8a6c25715737b1fea84e38be.1714469650.git.vmalik@redhat.com
Protocol can be set by __start_server() helper directly now, this makes
the heler start_server_proto() useless.
This patch drops it, and implenments start_server() using make_sockaddr()
and __start_server().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/55d8a04e0bb8240a5fda2da3e9bdffe6fc8547b2.1714014697.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
start_mptcp_server() shouldn't be a public helper, it only be used in
MPTCP tests. This patch moves it into prog_tests/mptcp.c, and implenments
it using make_sockaddr() and start_server_addr() instead of using
start_server_proto().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/50ec7049e280c60a2924937940851f8fee2b73b8.1714014697.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Make sure only sockopt programs can be attached to the setsockopt
and getsockopt hooks.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240426231621.2716876-4-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Run all existing test cases with the attachment created via
BPF_LINK_CREATE. Next commit will add extra test cases to verify
link_create attach_type enforcement.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240426231621.2716876-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adding kprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-8-jolsa@kernel.org
Adding kprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-7-jolsa@kernel.org
Some copy/paste leftover, this is never used.
Fixes: e3d9eac99a ("selftests/bpf: wq: add bpf_wq_init() checks")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-3-27afe7f3b17c@kernel.org
Add a selftests validating that it's possible to have some struct_ops
callback set declaratively, then disable it (by setting to NULL)
programmatically. Libbpf should detect that such program should
not be loaded. Otherwise, it will unnecessarily fail the loading
when the host kernel does not have the type information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240428030954.3918764-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The strdup() function returns a pointer to a new string which is a
duplicate of the string "input". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(input)" in parse_stats() to avoid
memory leak in veristat.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/ded44f8865cd7f337f52fc5fb0a5fbed7d6bd641.1714374022.git.tanggeliang@kylinos.cn
The strdup() function returns a pointer to a new string which is a
duplicate of the string "ptr". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(ptr)" in check_whitelist() and
check_blacklist() to avoid memory leaks in test_sockmap.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/b76f2f4c550aebe4ab8ea73d23c4cbe4f06ea996.1714374022.git.tanggeliang@kylinos.cn
The cgroup1_hierarchy test uses setup_classid_environment to setup
cgroupv1 environment. The problem is that the environment is set in
/sys/fs/cgroup and therefore, if not run under an own mount namespace,
effectively deletes all system cgroups:
$ ls /sys/fs/cgroup | wc -l
27
$ sudo ./test_progs -t cgroup1_hierarchy
#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
#41/2 cgroup1_hierarchy/test_root_cgid:OK
#41/3 cgroup1_hierarchy/test_invalid_level:OK
#41/4 cgroup1_hierarchy/test_invalid_cgid:OK
#41/5 cgroup1_hierarchy/test_invalid_hid:OK
#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
#41/8 cgroup1_hierarchy/test_sleepable_prog:OK
#41 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
$ ls /sys/fs/cgroup | wc -l
1
To avoid this, run setup_cgroup_environment first which will create an
own mount namespace. This only affects the cgroupv1_hierarchy test as
all other cgroup1 test progs already run setup_cgroup_environment prior
to running setup_classid_environment.
Also add a comment to the header of setup_classid_environment to warn
against this invalid usage in future.
Fixes: 360769233c ("selftests/bpf: Add selftests for cgroup1 hierarchy")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240429112311.402497-1-vmalik@redhat.com
The verifier assumes that 'sk' field in 'struct socket' is valid
and non-NULL when 'socket' pointer itself is trusted and non-NULL.
That may not be the case when socket was just created and
passed to LSM socket_accept hook.
Fix this verifier assumption and adjust tests.
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240427002544.68803-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZi9+AAAKCRDbK58LschI
g0nEAP487m7L0nLVriC2oIOWsi29tklW3etm6DO7gmGRGIHgrgEAnMyV1xBj3bGj
v6jJwDcybCym1hLx+1x1JCZ4eoAFswE=
=xbna
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vsyscall is a legacy API for fast execution of system calls. It maps
a page at address VSYSCALL_ADDR into the userspace program. This address
is in the top 10MB of the address space:
ffffffffff600000 - ffffffffff600fff | 4 kB | legacy vsyscall ABI
The last commit fixes the x86-64 BPF JIT to skip accessing addresses in
this memory region. Add this address to bpf_testmod_return_ptr() so we
can make sure that it is fixed.
After this change and without the previous commit, subprogs_extable
selftest will crash the kernel.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20240424100210.11982-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because srtt and mrtt_us are added as args in bpf_sock_ops at
BPF_SOCK_OPS_RTT_CB, a simple check is added to make sure they are both
non-zero.
$ ./test_progs -t tcp_rtt
#373 tcp_rtt:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-3-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Check if BPF_PROG_TEST_RUN for bpf_dummy_struct_ops programs
rejects execution if NULL is passed for non-nullable parameter.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
dummy_st_ops.test_2 and dummy_st_ops.test_sleepable do not have their
'state' parameter marked as nullable. Update dummy_st_ops.c to avoid
passing NULL for such parameters, as the next patch would allow kernel
to enforce this restriction.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported by Jose E. Marchesi in off-list discussion, GCC and LLVM
generate slightly different code for dummy_st_ops_success/test_1():
SEC("struct_ops/test_1")
int BPF_PROG(test_1, struct bpf_dummy_ops_state *state)
{
int ret;
if (!state)
return 0xf2f3f4f5;
ret = state->val;
state->val = 0x5a;
return ret;
}
GCC-generated LLVM-generated
---------------------------- ---------------------------
0: r1 = *(u64 *)(r1 + 0x0) 0: w0 = -0xd0c0b0b
1: if r1 == 0x0 goto 5f 1: r1 = *(u64 *)(r1 + 0x0)
2: r0 = *(s32 *)(r1 + 0x0) 2: if r1 == 0x0 goto 6f
3: *(u32 *)(r1 + 0x0) = 0x5a 3: r0 = *(u32 *)(r1 + 0x0)
4: exit 4: w2 = 0x5a
5: r0 = -0xd0c0b0b 5: *(u32 *)(r1 + 0x0) = r2
6: exit 6: exit
If the 'state' argument is not marked as nullable in
net/bpf/bpf_dummy_struct_ops.c, the verifier would assume that
'r1 == 0x0' is never true:
- for the GCC version, this means that instructions #5-6 would be
marked as dead and removed;
- for the LLVM version, all instructions would be marked as live.
The test dummy_st_ops/dummy_init_ret_value actually sets the 'state'
parameter to NULL.
Therefore, when the 'state' argument is not marked as nullable,
the GCC-generated version of the code would trigger a NULL pointer
dereference at instruction #3.
This patch updates the test_1() test case to always follow a shape
similar to the GCC-generated version above, in order to verify whether
the 'state' nullability is marked correctly.
Reported-by: Jose E. Marchesi <jemarch@gnu.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240424012821.595216-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add simple tc hook selftests to show the way to work with new crypto
BPF API. Some tricky dynptr initialization is used to provide empty iv
dynptr. Simple AES-ECB algo is used to demonstrate encryption and
decryption of fixed size buffers.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240422225024.2847039-4-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The wq test was missing destroy(skel) part which was causing bpf progs to stay
loaded. That was causing test_progs to complain with
"Failed to unload bpf_testmod.ko from kernel: -11" message, but adding
destroy() wasn't enough, since wq callback may be delayed, so loop on unload of
bpf_testmod if errno is EAGAIN.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 8290dba519 ("selftests/bpf: wq: add bpf_wq_start() checks")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Include network_helpers.h in test_sock_addr.c, use the newly added public
helper start_server_addr() instead of the local defined function
start_server(). This can avoid duplicate code.
In order to use functions defined in network_helpers.c in test_sock_addr.c,
Makefile needs to be updated and <Linux/err.h> needs to be included in
network_helpers.h to avoid compilation errors.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/3101f57bde5502383eb41723c8956cc26be06893.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
ASSERT helpers defined in test_progs.h shouldn't be used in public
functions like open_netns() and close_netns(). Since they depend on
test__fail() which defined in test_progs.c. Public functions may be
used not only in test_progs.c, but in other tests like test_sock_addr.c
in the next commit.
This patch uses log_err() to replace ASSERT helpers in open_netns()
and close_netns() in network_helpers.c to decouple dependencies, then
uses ASSERT_OK_PTR() to check the return values of all open_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/d1dad22b2ff4909af3f8bfd0667d046e235303cb.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
As Martin mentioned in review comment, there is an existing bug that
orig_netns_fd will be leaked in the later "goto fail;" case after
open("/proc/self/ns/net") in open_netns() in network_helpers.c. This
patch adds "close(token->orig_netns_fd);" before "free(token);" to
fix it.
Fixes: a30338840f ("selftests/bpf: Move open_netns() and close_netns() into network_helpers.c")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/a104040b47c3c34c67f3f125cdfdde244a870d3c.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
We assign the callback and set everything up.
The actual tests of these callbacks will be done when bpf_wq_start() is
available.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-14-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch uses public helper connect_to_addr() exported in
network_helpers.h instead of the local defined function connect_to_server()
in prog_tests/sk_assign.c. This can avoid duplicate code.
The code that sets SO_SNDTIMEO timeout as timeo_sec (3s) can be dropped,
since connect_to_addr() sets default timeout as 3s.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/98fdd384872bda10b2adb052e900a2212c9047b9.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper connect_to_addr() exported in
network_helpers.h instead of the local defined function connect_to_server()
in prog_tests/cls_redirect.c. This can avoid duplicate code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4a03ac92d2d392f8721f398fa449a83ac75577bc.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move the third argument "int type" of connect_to_addr() to the first one
which is closer to how the socket syscall is doing it. And add a
network_helper_opts argument as the fourth one. Then change its usages in
sock_addr.c too.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/088ea8a95055f93409c5f57d12f0e58d43059ac4.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Include network_helpers.h in prog_tests/sk_assign.c, use the newly
added public helper start_server_addr() instead of the local defined
function start_server(). This can avoid duplicate code.
The code that sets SO_RCVTIMEO timeout as timeo_sec (3s) can be dropped,
since start_server_addr() sets default timeout as 3s.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/2af706ffbad63b4f7eaf93a426ed1076eadf1a05.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In order to pair up with connect_to_addr(), this patch adds a new helper
start_server_addr(), which is a wrapper of __start_server(). It accepts
an argument 'addr' of 'struct sockaddr_storage' type instead of a string
type argument like start_server(), and a network_helper_opts argument as
the last one.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/2f01d48fa026467926738debe554ac452c19b86f.1713427236.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
selftest build is fairly noisy, it's easy to miss warnings.
It's standard practice to add alternative messages in
the Makefile. I was grepping for existing solutions,
and found that bpf already has the right knobs.
Move them to lib.mk and adopt in net.
Convert the basic rules in lib.mk.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240411190534.444918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have two printk tests reading trace_pipe in non blocking way,
with the very same code. Moving that in new read_trace_pipe_iter
function.
Current read_trace_pipe is used from samples/bpf and needs to
do blocking read and printf of the trace_pipe data, using new
read_trace_pipe_iter to implement that.
Both printk tests do early checks for the number of found messages
and can bail earlier, but I did not find any speed difference w/o
that condition, so I did not complicate the change more for that.
Some of the samples/bpf programs use read_trace_pipe function,
so I kept that interface untouched. I did not see any issues with
affected samples/bpf programs other than there's slight change in
read_trace_pipe output. The current code uses puts that adds new
line after the printed string, so we would occasionally see extra
new line. With this patch we read output per lines, so there's no
need to use puts and we can use just printf instead without extra
new line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240410140952.292261-1-jolsa@kernel.org
The test sets a hardware breakpoint and uses a BPF program to suppress the
side effects of a perf event sample, including I/O availability signals,
SIGTRAPs, and decrementing the event counter limit, if the IP matches the
expected value. Then the function with the breakpoint is executed multiple
times to test that all effects behave as expected.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-8-khuey@kylehuey.com
This patch extracts the code to send and receive data into a new
helper named send_recv_data() in network_helpers.c and export it
in network_helpers.h.
This helper will be used for MPTCP BPF selftests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/5231103be91fadcce3674a589542c63b6a5eedd4.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Avoid setting total_bytes and stop as global variables, this patch adds
a new struct named send_recv_arg to pass arguments between threads. Put
these two variables together with fd into this struct and pass it to
server thread, so that server thread can access these two variables without
setting them as global ones.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/ca1dd703b796f6810985418373e750f7068b4186.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch fixes the following "umount cgroup2" error in test_sockmap.c:
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Cgroup fd cg_fd should be closed before cleanup_cgroup_environment().
Fixes: 13a5f3ffd2 ("bpf: Selftests, sockmap test prog run without setting cgroup")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/0399983bde729708773416b8488bac2cd5e022b8.1712639568.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When looking at Alexei's patch ([1]) which added tests for atomics,
I noticed that the tests will be skipped with cpuv4. For example,
with latest llvm19, I see:
[root@arch-fb-vm1 bpf]# ./test_progs -t arena_atomics
#3/1 arena_atomics/add:OK
...
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
[root@arch-fb-vm1 bpf]# ./test_progs-cpuv4 -t arena_atomics
#3 arena_atomics:SKIP
Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED
[root@arch-fb-vm1 bpf]#
It is perfectly fine to enable atomics-related tests for cpuv4.
With this patch, I have
[root@arch-fb-vm1 bpf]# ./test_progs-cpuv4 -t arena_atomics
#3/1 arena_atomics/add:OK
...
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
[1] https://lore.kernel.org/r/20240405231134.17274-2-alexei.starovoitov@gmail.com
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410153326.1851055-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few more tests in sockmap_basic.c and sockmap_listen.c to
test bpf_link based APIs for SK_MSG and SK_SKB programs.
Link attach/detach/update are all tested.
All tests are passed.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043547.3738448-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These helper functions will be used later new tests as well.
There are no functionality change.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043542.3738166-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We're building more python tests on the netdev side, and some
of the classes from the venerable BPF offload tests can be reused.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The output goes like this if I make samples/bpf:
...warning: no previous prototype for ‘get_cgroup_id_from_path’...
Make this function static could solve the warning problem since
no one outside of the file calls it.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240406144613.4434-1-kerneljasonxing@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now that we can call some kfuncs from BPF_PROG_TYPE_SYSCALL progs, let's
add some selftests that verify as much. As a bonus, let's also verify
that we can't call the progs from raw tracepoints. Do do this, we add a
new selftest suite called verifier_kfunc_prog_types.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240405143041.632519-3-void@manifault.com
The verifier in the kernel ensures that the struct_ops operators behave
correctly by checking that they access parameters and context
appropriately. The verifier will approve a program as long as it correctly
accesses the context/parameters, regardless of its function signature. In
contrast, libbpf should not verify the signature of function pointers and
functions to enable flexibility in loading various implementations of an
operator even if the signature of the function pointer does not match those
in the implementations or the kernel.
With this flexibility, user space applications can adapt to different
kernel versions by loading a specific implementation of an operator based
on feature detection.
This is a follow-up of the commit c911fc61a7 ("libbpf: Skip zeroed or
null fields if not found in the kernel type.")
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240404232342.991414-1-thinker.li@gmail.com
A test is added for bpf_for_each_map_elem() with either an arraymap or a
hashmap.
$ tools/testing/selftests/bpf/test_progs -t for_each
#93/1 for_each/hash_map:OK
#93/2 for_each/array_map:OK
#93/3 for_each/write_map_key:OK
#93/4 for_each/multi_maps:OK
#93 for_each:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240405025536.18113-4-lulie@linux.alibaba.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests validating that BPF verifier handles precision marking
for SCALAR registers derived from r10 (fp) register correctly.
Given `r0 = (s8)r10;` syntax is not supported by older Clang compilers,
use the raw BPF instruction syntax to maximize compatibility.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240404214536.3551295-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a test case to evaluate AF_XDP's robustness by pushing hardware
and software ring sizes to their limits. This test ensures AF_XDP's
reliability amidst potential producer/consumer throttling due to maximum
ring utilization. The testing strategy includes:
1. Configuring rings to their maximum allowable sizes.
2. Executing a series of tests across diverse batch sizes to assess
system's behavior under different configurations.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-8-tushar.vyavahare@intel.com
Add a new test case that stresses AF_XDP and the driver by configuring
small hardware and software ring sizes. This verifies that AF_XDP continues
to function properly even with insufficient ring space that could lead
to frequent producer/consumer throttling. The test procedure involves:
1. Set the minimum possible ring configuration(tx 64 and rx 128).
2. Run tests with various batch sizes(1 and 63) to validate the system's
behavior under different configurations.
Update Makefile to include network_helpers.o in the build process for
xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-7-tushar.vyavahare@intel.com
Introduce a new function, set_ring_size(), to manage asynchronous AF_XDP
socket closure. Retry set_hw_ring_size up to SOCK_RECONF_CTR times if it
fails due to an active AF_XDP socket. Return an error immediately for
non-EBUSY errors. This enhances robustness against asynchronous AF_XDP
socket closures during ring size changes.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-6-tushar.vyavahare@intel.com
Introduce a new function called set_hw_ring_size that allows for the
dynamic configuration of the ring size within the interface.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-5-tushar.vyavahare@intel.com
Introduce a new function called get_hw_size that retrieves both the
current and maximum size of the interface and stores this information
in the 'ethtool_ringparam' structure.
Remove ethtool_channels struct from xdp_hw_metadata.c due to redefinition
error. Remove unused linux/if.h include from flow_dissector BPF test to
address CI pipeline failure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-4-tushar.vyavahare@intel.com
Convert the constant BATCH_SIZE into a variable named batch_size to allow
dynamic modification at runtime. This is required for the forthcoming
changes to support testing different hardware ring sizes.
While running these tests, a bug was identified when the batch size is
roughly the same as the NIC ring size. This has now been addressed by
Maciej's fix in commit 913eda2b08 ("i40e: xsk: remove count_mask").
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-3-tushar.vyavahare@intel.com
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY.
rY = addr_space_cast(rX, 1, 0) : used to convert a bpf arena pointer to
a pointer in the userspace vma. This has to be converted by the JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240325150716.4387-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to prevent mptcpify prog from affecting the running results
of other BPF tests, a pid limit was added to restrict it from only
modifying its own program.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8987e2938e15e8ec390b85b5dcbee704751359dc.1712054986.git.tanggeliang@kylinos.cn
When testing send_signal and stacktrace_build_id_nmi using the riscv sbi
pmu driver without the sscofpmf extension or the riscv legacy pmu driver,
then failures as follows are encountered:
test_send_signal_common:FAIL:perf_event_open unexpected perf_event_open: actual -1 < expected 0
#272/3 send_signal/send_signal_nmi:FAIL
test_stacktrace_build_id_nmi:FAIL:perf_event_open err -1 errno 95
#304 stacktrace_build_id_nmi:FAIL
The reason is that the above pmu driver or hardware does not support
sampling events, that is, PERF_PMU_CAP_NO_INTERRUPT is set to pmu
capabilities, and then perf_event_open returns EOPNOTSUPP. Since
PERF_PMU_CAP_NO_INTERRUPT is not only set in the riscv-related pmu driver,
it is better to skip testing when this capability is set.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402073029.1299085-1-pulehui@huaweicloud.com
Currently, cond_break macro uses bytes to encode the may_goto insn.
Patch [1] in llvm implemented may_goto insn in BPF backend.
Replace byte-level encoding with llvm inline asm for better usability.
Using llvm may_goto insn is controlled by macro __BPF_FEATURE_MAY_GOTO.
[1] 0e0bfacff7
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240402025446.3215182-1-yonghong.song@linux.dev
When BPF selftests are built in RELEASE=1 mode with -O2 optimization
level, uprobe_multi binary, called from multi-uprobe tests is optimized
to the point that all the thousands of target uprobe_multi_func_XXX
functions are eliminated, breaking tests.
So ensure they are preserved by using weak attribute.
But, actually, compiling uprobe_multi binary with -O2 takes a really
long time, and is quite useless (it's not a benchmark). So in addition
to ensuring that uprobe_multi_func_XXX functions are preserved, opt-out
of -O2 explicitly in Makefile and stick to -O0. This saves a lot of
compilation time.
With -O2, just recompiling uprobe_multi:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 291.66s user 2.54s system 99% cpu 4:55.52 total
With -O0:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 22.40s user 1.91s system 99% cpu 24.355 total
5 minutes vs (still slow, but...) 24 seconds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240329190410.4191353-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martin KaFai Lau
Jose E. Marchesi
Puranjay Mohan
Andrii Nakryiko
Cupertino Miranda
Michal Schmidt
Miao Xu
Jordan Rife
Jakub Kicinski
Viktor Malik
Geliang Tang
Stanislav Fomichev
Jiri Olsa
Benjamin Tissoires
Alexei Starovoitov
Philo Lu
Eduard Zingerman
Andrea Righi
Vadim Fedorenko
Kumar Kartikeya Dwivedi
Kyle Huey
Yonghong Song
Jason Xing
David Vernet
Kui-Feng Lee
Tushar Vyavahare
Puranjay Mohan
Pu Lehui