- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi: Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- renesas_sdhi: Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
- sdhci-acpi: Disable write protect detection on Toshiba WT10-A
- sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654: Re-work and fix the tuning support for multiple speed-modes
- sdhci_am654: Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
- sdhci-of-dwcmshc: Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback
-----BEGIN PGP SIGNATURE-----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=I2JP
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
Use module_sdio_driver() instead of open-coding it. No functional
difference.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240329171019.63836-6-krzysztof.kozlowski@linaro.org
Core in sdio_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-6-ae46d6b955eb@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There is currently an object (`header`), at the beginning of multiple
structures, that contains a flexible structure (`struct mwl8k_cmd_pkt`),
for example:
struct mwl8k_cmd_get_hw_spec_sta {
struct mwl8k_cmd_pkt header;
...
__le32 num_tx_desc_per_queue;
__le32 total_rxd;
} __packed;
So, in order to avoid ending up with flexible-array members in the
middle of multiple other structs, we use the `__struct_group()` helper
to separate the flexible array from the rest of the members in the
flexible structure:
struct mwl8k_cmd_pkt {
__struct_group(mwl8k_cmd_pkt_hdr, hdr, __packed,
... the rest of the members
);
char payload[];
} __packed;
With the change described above, we now declare objects of the type of
the tagged struct, in this case `struct mwl8k_cmd_pkt_hdr`, without
embedding flexible arrays in the middle of another struct:
struct mwl8k_cmd_get_hw_spec_sta {
struct mwl8k_cmd_pkt_hdr header;
...
__le32 num_tx_desc_per_queue;
__le32 total_rxd;
} __packed;
Also, update the type of a couple of variables and function parameters
from `struct mwl8k_cmd_pkt` to `struct mwl8k_cmd_pkt_hdr`.
So, with these changes, fix 33 of the following warnings[1]:
drivers/net/wireless/marvell/mwl8k.c:2353:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://gist.github.com/GustavoARSilva/7a841a92c0f24e5efdb30ce02b601eb8 [1]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/ZgDrhe5pbV/WvDiZ@neat
The module metadata for the firmware file mrvl/sd8801_uapsta.bin
is missing.
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240313183156.2234301-1-victor.gonzalo@anddroptable.net
This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used in
future to allow controllers to directly trigger SPI operations (eg, from
interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages.
- A big set of updates from Uwe Kleine-König moving drivers to use APIs
with more modern terminology for controllers.
- Major overhaul of the s3c64xx driver.
- Support for Google GS101 and Samsung Exynos850.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U
h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt
mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2
8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj
kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0
QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/
yqcpbCUwZ1AETXHcmly7YwNpPV9LBg==
=+Xw/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
struct mwifiex_ie_types_chan_list_param_set::chan_scan_param is treated
as a flexible array, so convert it into one so that it doesn't trip
the array bounds sanitizer[1]. Only a few places were using sizeof()
on the whole struct, so adjust those to follow the calculation pattern
to avoid including the trailing single element.
Examining binary output differences doesn't appear to show any literal
size values changing, though it is obfuscated a bit by the compiler
adjusting register usage and stack spill slots, etc.
Link: https://github.com/KSPP/linux/issues/51 [1]
Cc: Brian Norris <briannorris@chromium.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: zuoqilin <zuoqilin@yulong.com>
Cc: Ruan Jinjie <ruanjinjie@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240207103024.make.423-kees@kernel.org
Use convenient 'kstrtou32_from_user()' in 'mwifiex_verext_write()'
and 'kstrtobool_from_user()' in 'mwifiex_timeshare_coex_write()',
respectively. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240110115314.421298-1-dmantipov@yandex.ru
Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended up not part of the chandef, but I've
now realized that this was wrong. Even for clients, the RX,
and perhaps more importantly, CCA configuration needs to take
puncturing into account.
Move puncturing into the chandef, and adjust all the code
accordingly. Also add a few tests for puncturing in chandef
compatibility checking.
Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/
Suggested-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 8caab75fd2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
this driver.
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/971429eacddbad4c2f49b783ddd68746c1929ab3.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The mwifiex driver include two legacy GPIO headers but does
not use symbols from any of them.
The driver does contain some "gpio" handling code, but this
is some custom GPIO interface, not the Linux GPIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-4-e1c7c5d68746@linaro.org
In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().
Fixes: 876c9d3aeb ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
The first "new features" pull request for v6.9. We have only driver
changes this time and most of them are for Realtek drivers. Really
nice to see activity in Broadcom drivers again.
Major changes:
rtwl8xxxu
* RTL8188F: concurrent interface support
* Channel Switch Announcement (CSA) support in AP mode
brcmfmac
* per-vendor feature support
* per-vendor SAE password setup
rtlwifi
* speed up USB firmware initialisation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWyOigRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt2OAf8DG1/4j+iBanejbVb1IVYklIG1lt6L092
kwnBZO+I0TAF9u5LGr91kyuZJ/2AQUi8awcE4364D54tTVAqDSl/ZwdiTbYZdemq
/JiJeNYuVTaJ5wu0Kk5jdMMdCgwV570JLcEXcf+jvxZj7HGz8HeT5MH19nLN7O+Z
irbfSldYeL5b/f+4UUlgZsa87tZ/E/LOEK28Vf6tWRLXZOdyUCXsKS1z6UOr4pFb
d1QKenu/wYoc0hHbWcwa3G8zmIm7IdtpIWePPF3j8Gj7WntDVtY49llP7A4m3WnG
/u5iPAj/xwkLiCADLBwKYkWC1yREQ0EGlv9gcocfF50METB4OGH7YQ==
=CgVA
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The first "new features" pull request for v6.9. We have only driver
changes this time and most of them are for Realtek drivers. Really
nice to see activity in Broadcom drivers again.
Major changes:
rtwl8xxxu
* RTL8188F: concurrent interface support
* Channel Switch Announcement (CSA) support in AP mode
brcmfmac
* per-vendor feature support
* per-vendor SAE password setup
rtlwifi
* speed up USB firmware initialisation
* tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: iwlegacy: Use kcalloc() instead of kzalloc()
wifi: rtw89: fix disabling concurrent mode TX hang issue
wifi: rtw89: fix HW scan timeout due to TSF sync issue
wifi: rtw89: add wait/completion for abort scan
wifi: rtw89: fix null pointer access when abort scan
wifi: rtw89: disable RTS when broadcast/multicast
wifi: rtw89: Set default CQM config if not present
wifi: rtw89: refine hardware scan C2H events
wifi: rtw89: refine add_chan H2C command to encode_bits
wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RX
wifi: rtw89: 8922a: add TX power related ops
wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCA
wifi: rtw89: 8922a: add chip_ops related to BB init
wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips
wifi: rtlwifi: Speed up firmware loading for USB
wifi: rtl8xxxu: add missing number of sec cam entries for all variants
wifi: brcmfmac: allow per-vendor event handling
wifi: brcmfmac: avoid invalid list operation when vendor attach fails
wifi: brcmfmac: Demote vendor-specific attach/detach messages to info
...
====================
Link: https://lore.kernel.org/r/20240125104030.B6CA6C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaedng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yndHACfX3SA2ipK5umpMsWOoLMCBV6VyrwAn3t+FPd/
z4mNiCuNUhbEnU7RinK0
=k/E9
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
debugfs_create_dir() returns ERR_PTR and never return NULL.
As Russell suggested, this patch removes the error checking for
debugfs_create_dir(). This is because the DebugFS kernel API is developed
in a way that the caller can safely ignore the errors that occur during
the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in
start_creating() which can handle it gracefully. So these checks are
unnecessary.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20230903030216.1509013-3-ruanjinjie@huawei.com
There is usbdrv_wrap in struct usb_driver and usb_device_driver, it
contains device_driver and for_devices. for_devices is used to
distinguish between device drivers and interface drivers.
Like the is_usb_device(), it tests the type of the device. We can test
that if the probe of device_driver is equal to usb_probe_device in
is_usb_device_driver(), and then the struct usbdrv_wrap is no longer
needed.
Clean up struct usbdrv_wrap, use device_driver directly in struct
usb_driver and usb_device_driver. This makes the code cleaner.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240104032822.1896596-1-yajun.deng@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AP BSSID configuration is missing at AP start. Without this fix, FW returns
STA interface MAC address after first init. When hostapd restarts, it gets MAC
address from netdev before driver sets STA MAC to netdev again. Now MAC address
between hostapd and net interface are different causes STA cannot connect to
AP. After that MAC address of uap0 mlan0 become the same. And issue disappears
after following hostapd restart (another issue is AP/STA MAC address become the
same).
This patch fixes the issue cleanly.
Signed-off-by: David Lin <yu-hao.lin@nxp.com>
Fixes: 12190c5d80 ("mwifiex: add cfg80211 start_ap and stop_ap handlers")
Cc: stable@vger.kernel.org
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215005118.17031-1-yu-hao.lin@nxp.com
For SDIO IW416, due to a bug, FW may return ready before complete full
initialization. Command timeout may occur at driver load after reboot.
Workaround by adding 100ms delay at checking FW status.
Signed-off-by: David Lin <yu-hao.lin@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin AM62 (IW416)
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231208234029.2197-1-yu-hao.lin@nxp.com
Commit 4b478bf6bd ("wifi: libertas: drop 16-bit PCMCIA support") reworks
the dependencies for config LIBERTAS, and adds alternative dependencies for
USB, SDIO and SPI.
The config option SDIO however does not exist in the kernel tree. It was
probably intended to refer to the config option MMC, which represents
"MMC/SD/SDIO card support" and is used as dependency by various other
drivers that use SDIO.
Fix the dependency to the config option MMC for declaring the requirement
on provision of SDIO support.
Fixes: 4b478bf6bd ("wifi: libertas: drop 16-bit PCMCIA support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122083047.12774-1-lukas.bulwahn@gmail.com
Clang static analyzer complains that value stored to 'priv' is never read.
'priv' is useless, so remove it to save space.
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231115092328.1048103-1-suhui@nfschina.com
Libertas no longer references the iw_handler infrastructure or wext_spy,
so neither of the 'select' statements are used any more.
Fixes: e86dc1ca46 ("Libertas: cfg80211 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231108153409.1065286-1-arnd@kernel.org
With all the other PCMCIA WLAN adapters gone from the kernel, this is now
the last remaining device with this interface, but as far as I can tell,
all the actual libertas users were actually using either SDIO or USB.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Using the full struct cfg80211_ap_settings for an update is
misleading, since most settings cannot be updated. Split the
update case off into a new struct cfg80211_ap_update.
Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce a few more (PCIE and generic interface related)
cleanups which becomes reasonable after the previous patch.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-2-dmantipov@yandex.ru
Since 'mwifiex_write_reg()' just issues void 'iowrite32()',
convert the former to 'void' and simplify all related users
(with the only exception of 'read_poll_timeout()' which
explicitly requires a non-void function argument).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-1-dmantipov@yandex.ru
The mwifiex_pcie driver is missing the MODULE_FIRMWARE macro to
add the firmware files needed to the module metadata.
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230914211938.28395-1-victor.gonzalo@anddroptable.net
Drop filled with NULL pointers but otherwise unused 'skb_arr'
array of 'struct mwifiex_sdio_mpa_rx', adjust related code.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230821115254.167552-1-dmantipov@yandex.ru
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes: 1195852816 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org
Modify the prototype for change_beacon() in struct cfg80211_op to
accept cfg80211_ap_settings instead of cfg80211_beacon_data so that
it can process data in addition to beacons.
Modify the prototypes of ieee80211_change_beacon() and driver specific
functions accordingly.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com
[while at it, remove pointless "if (info)" check in tracing that just
makes all the lines longer than they need be - it's never NULL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add sanity checks for both `tlv_len` and `tlv_bitmap_len` before
decoding data from `event_buf`.
This prevents any malicious or buggy firmware from overflowing
`event_buf` through large values for `tlv_len` and `tlv_bitmap_len`.
Suggested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d4f8780527d551552ee96f17a0229e02e1c200d1.1692931954.git.gustavoars@kernel.org
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct mwifiex_ie_types_rxba_sync with
flexible-array member, and refactor the rest of the code, accordingly.
This results in no differences in binary output.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/79c801c69c8beece2f80502c60166036d3c047cc.1692931954.git.gustavoars@kernel.org
In a TLV encoding scheme, the Length part represents the length after
the header containing the values for type and length. In this case,
`tlv_len` should be:
tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len
Notice that the `- 1` accounts for the one-element array `bitmap`, which
1-byte size is already included in `sizeof(*tlv_rxba)`.
So, if the above is correct, there is a double-counting of some members
in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp`
are calculated:
968 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len);
969 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba);
in specific, members:
drivers/net/wireless/marvell/mwifiex/fw.h:777
777 u8 mac[ETH_ALEN];
778 u8 tid;
779 u8 reserved;
780 __le16 seq_num;
781 __le16 bitmap_len;
This is clearly wrong, and affects the subsequent decoding of data in
`event_buf` through `tlv_rxba`:
970 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp;
Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)`
in the calculation of `tlv_buf_left` and `tmp`.
This results in the following binary differences before/after changes:
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
| @@ -4698,11 +4698,11 @@
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968
| tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len);
| - 1da7: lea -0x11(%rbx),%edx
| + 1da7: lea -0x4(%rbx),%edx
| 1daa: movzwl %bp,%eax
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969
| tmp = (u8 *)tlv_rxba + sizeof(tlv_rxba->header) + tlv_len;
| - 1dad: lea 0x11(%r15,%rbp,1),%r15
| + 1dad: lea 0x4(%r15,%rbp,1),%r15
The above reflects the desired change: avoid counting 13 too many bytes;
which is the total size of the double-counted members in
`struct mwifiex_ie_types_rxba_sync`:
$ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
struct mwifiex_ie_types_rxba_sync {
struct mwifiex_ie_types_header header; /* 0 4 */
|-----------------------------------------------------------------------
| u8 mac[6]; /* 4 6 */ |
| u8 tid; /* 10 1 */ |
| u8 reserved; /* 11 1 */ |
| __le16 seq_num; /* 12 2 */ |
| __le16 bitmap_len; /* 14 2 */ |
| u8 bitmap[1]; /* 16 1 */ |
|----------------------------------------------------------------------|
| 13 bytes|
-----------
/* size: 17, cachelines: 1, members: 7 */
/* last cacheline: 17 bytes */
} __attribute__((__packed__));
Fixes: 99ffe72cda ("mwifiex: process rxba_sync event")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/06668edd68e7a26bbfeebd1201ae077a2a7a8bce.1692931954.git.gustavoars@kernel.org
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f4492 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
Remove unused and set but unused 'dfs_workqueue', 'dfs_work', and
'scan_channels' members of 'struct mwifiex_adapter', adjust users.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814142101.60308-1-dmantipov@yandex.ru
Add missed return in mwifiex_uap_queue_bridged_pkt() and
mwifiex_process_rx_packet().
Fixes: 1195852816 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810083911.3725248-1-pinkperfect2021@gmail.com
Use is_zero_ether_addr() instead of ether_addr_equal()
to check if the ethernet address is all zeros.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230808081023.2303423-1-ruanjinjie@huawei.com
In 'mwifiex_process_sta_txpd()' and 'mwifiex_process_uap_txpd()',
replace 'BUG_ON()' with runtime check, and move all these checks
to 'mwifiex_process_tx()'. This way, both callees may be converted
to 'void', and the caller may be simplified as well.
Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-5-dmantipov@yandex.ru
Return -1 on possible 'mwifiex_write_reg()' errors in
'mwifiex_init_sdio_ioport()', do not ignore the value
returned by the latter in 'mwifiex_init_sdio()' and
'mwifiex_sdio_up_dev()' as well.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-4-dmantipov@yandex.ru
Return -EINVAL on possible 'sscanf()' errors in
'mwifiex_regrdwr_write()' and 'mwifiex_rdeeprom_write()'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-3-dmantipov@yandex.ru
Drop unused fields 'status_code' of 'struct mwifiex_txinfo',
'dfs_chan_switch_timer', 'sleep_params' (including related data
type 'struct mwifiex_sleep_params') of 'struct mwifiex_adapter',
adjust related code.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-2-dmantipov@yandex.ru
Linus Torvalds
Dan Carpenter
Krzysztof Kozlowski
Jakub Kicinski
Gustavo A. R. Silva
Víctor Gonzalo
Kees Cook
Dmitry Antipov
Johannes Berg
Uwe Kleine-König
Linus Walleij
Zhipeng Lu
Jinjie Ruan
Yajun Deng
David Lin
Lukas Bulwahn
Su Hui
Arnd Bergmann
Pin-yen Lin
Aloka Dixit
Polaris Pi