[Why]
the original wait for 2 static frames before enter static screen
was not good enough for IPS-enabled case since enter/exit takes more time.
[How]
Changed logic for hardcoded wait frame values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Phantom streams and planes were previously not referenced explcitly on creation.
[HOW?]
To reduce memory management complexity, add an additional phantom streams and planes
reference into dc_state, and move mall_stream_config to stream_status inside
the state to make it safe to modify in shallow copies. Also consildates any logic
that is affected by this change to dc_state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Part of the dc_state interface that deals with adding streams and planes should
remain public, while others that deal with internal status' and subvp should be
private to DC.
[HOW?]
Move and rename the public functions to dc_state.h and private functions to
dc_state_priv.h. Also add some additional functions for extracting subvp meta
data from the state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add new option for debug usage
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is only a single call to dc_post_update_surfaces_to_stream so
there is no need to have two flags to control it. Unifying this to a
single flag allows dc_stream_adjust_vmin_vmax to skip actual
programming when there is no change required.
[how]
Remove wm_optimze_required flag and set only optimize_required in its
place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing
range matches the requested one and skip programming if they are equal.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
* Enable writeback.
* Add multiple fixes for DML2 and DCN35.
* Introduce small code style adjustments.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The is_automated flag logic only applies to USB4 DPIA links during DP LL
compliance test automation. The flag should not be set for non-DPIA
cases.
[How]
Add check for DPIA link endpoint type before setting the flag. Also,
rename is_automated to skip_fallback_on_link_loss for clarity.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MST relevant variables are maintained at drm side. As the result, we
still have to call drm_dp_remove_payload_part2() to update the relevant
values regardless the link is under mst mode or not. We used to have a
workaround patch to tackle this: commit 3d8fcc6740 ("drm/amd/display:
Extract temp drm mst deallocation wa into its own function")
Now it's time to remove the workaround and adjust the flow.
[How]
During deallocate_mst_payload(), source actually doesn't send out
ALLOCATE_PAYLOAD at the end as like the flow in allocate_mst_payload().
Call function dm_helpers_dp_mst_send_payload_allocation() at the end of
deallocate_mst_payload() is a bit confusing.
Separate dm_helpers_dp_mst_send_payload_allocation() into 2 functions.
Have a new function dm_helpers_dp_mst_update_mst_mgr_for_deallocation()
to replace dm_helpers_dp_mst_send_payload_allocation() for payload
deallocation.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Remove the brightness cache in DC. It uses a single value to represent
the brightness for both SDR and HDR mode. This leads to flash in HDR
on/off. It also unconditionally programs brightness as in HDR mode. This
may introduce garbage on SDR mode in miniLED panel.
[How]
Simplify the initialization flow by removing the DC cache and taking
what panel has as default. Expand the mechanism for PWM to DPCD Aux to
restore cached brightness value generally.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add missing chips for HDCP
- Add new command to disable replay timing resync
- Fix encoder disable logic
- Enable DSC Flag in MST Mode Validation
- Change the DMCUB mailbox memory location from FB to inbox
- Add disable timeout option
- Negate IPS allow and commit bits
- Enable DCN clock gating for DCN35
- Prefer currently used OTG master when acquiring free pipe
- Try to acquire a free OTG master not used in cur ctx first
- Clear dpcd_sink_ext_caps if not set
- Enable fast plane updates on DCN3.2 and above
- Add null checks for 8K60 lightup
- Refactor resource into component directory
- Fix DSC not Enabled on Direct MST Sink
- Guard against invalid RPTR/WPTR being set
- Enable CM low mem power optimization
- Fix a debugfs null pointer error
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver continues running whenever there is
is timeout from smu or dmcub.
It is difficult to track failure state
when dcn, dc or dmcub changes on root failure.
[HOW]
Add disable_timeout option to halt driver
whenever there is a failure in response.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
Update test link rate DPCD bit field to match spec
Enable RCO options for dcn35
Add missing dml2 init value for dcn35
Enable DCN clock gating
DCN35 Disable cm power optimization
Allow 16 max_slices for DP2 DSC
Fix OTG disable workaround logic
Enable more IPS options
Fix FRL assertion on boot
Fix missing blendTF programming
Update DP HPO MSA with colorimetry from test request
Fix handling duplicate planes on one stream
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
On boot disable domain22 force power on
decouple dmcub execution to reduce lock granularity
Enable fast update on blendTF change
Fix blend LUT programming
Program plane color setting correctly
amend HPD handler for Replay
Avoid NULL dereference of timing generator
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC v3.2.256
Summary:
* Fixes null-deref regression after
"drm/amd/display: Update OPP counter from new interface"
* Fixes display flashing when VSR and HDR enabled on dcn32
* Fixes dcn3x intermittent hangs due to FPO
* Fixes MST Multi-Stream light up on dcn35
* Fixes green screen on DCN31x when DVI and HDMI monitors attached
* Adds DML2 improvements
* Adds idle power optimization improvements
* Accommodates panels with lower nit backlight
* Updates SDP VSC colorimetry from DP test automation request
* Reverts "drm/amd/display: allow edp updates for virtual signal"
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
To enable automated testing through IGT, expose an API that is
accessible through debugfs to query current status of SubVP feature.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittent reboot hangs are observed introduced by
"Improve x86 and dmub ips handshake".
[How]
Bring back the commit but fix the polling.
Avoid hanging in place forever by bounding the delay and ensure that
we still message DMCUB on IPS2 exit to notify driver idle has been
cleared.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need a helper function to check idle power is allowed
so that dc doesn't access any registers that are power-gated.
[how]
Implement helper function to check idle power optimization.
Enable a hook to check if detection is allowed.
V2:
Add function hooks for set and get idle states.
Check if function hook was properly initialized.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1288d70208.
Causes intermittent hangs during reboot stress testing.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As dc_set_power_state() no longer allocates memory, it's not necessary
to have return types and check return code as it can't fail anymore.
Change it back to `void`.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Refactor DPG test pattern logic for ODM cases
- Refactor HWSS into component folder
- Revert "drm/amd/display: Add a check for idle power optimization"
- Revert "drm/amd/display: remove duplicated edp relink to fastboot
- Update cursor limits based on SW cursor fallback limits
- Update stream mask
- Update pmfw_driver_if new structure
- Modify SMU message logs
- Don't set dpms_off for seamless boot
Known issue:
DWB (Writeback functionality) is broken.
Fix will be available in DC 3.2.256
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Rename hw_sequencer to hwseq.
Move all hwseq files to unique
folder hwss.
[how]
creating hwss repo in dc, and moved the dcnxx_hwseq.c
and .h files into corresponding new folders inside the hwss
and cleared the linkage errors by adding relative paths
in the Makefile.template.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 434cf7af49 ("drm/amd/display: Add a check for idle power optimization")
Because it cause Freesync and S4 regression
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It's important to make sure SMU messages
are logged by default to improve debugging for
power optimization use cases.
[how]
Change logs to warnings when SMU message
returns non-success id.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC is transitioning from DML to DML2, and this commit introduces all the
required changes for some of the already available ASICs and adds the
required code infra to support new ASICs under DML2. DML2 is also a
generated code that provides better mode verification and programming
models for software/hardware, and it enables a better way to create
validation tools. This version is more like a middle step to the
complete transition to the DML2 version.
Changes since V1:
- Alex: Fix typos
Changes since V2:
- Update DC includes
Changes since V3:
- Fix 32 bit compilation issues on x86
Changes since V4:
- Avoid compilation of DML2 on some not supported 32-bit architecture
- Update commit message
Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC v3.2.254
* Stability fixes through null pointer checks, blackscreen fixes on
certain configurations
* Improvements for various functionality like Idle optimization, ILR, DSC, IPS
* Fixes for ILR functionality
* Trivial code cleanups
===================================================================
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need a helper function to check idle power is allowed
so that dc doesn't access any registers that are power-gated.
[how]
Implement helper function to check idle power optimization.
Enable a hook to check if detection is allowed.
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Clip size increase will increase viewport, which could cause us to
switch to MPC combine.
If we skip full update, we are not able to change to MPC combine in
fast update. This will cause corruption showing on the video plane.
[how]
treat clip size increase of a surface larger than 5k as a full update.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver needs to be compatible with PM FW that doesn't support IPS
[how]
Toggle internal control flag
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC code is reused by other OSes and so Linux return codes don't
make sense. Change dc_set_power_state() to boolean and add a wrapper
dm_set_power_state() to return a Linux error code for the memory
allocation failure.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the suspend process dc_set_power_state() will use kzalloc
to allocate memory, but this potentially fails with memory pressure.
If it fails, the suspend should be aborted.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Harry.Wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow dc report maximum display clock possible at vmin
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Fix incorrect odm change detection logic
- Add primary pipe check when building slice table for dcn3x
- Add get primary dpp pipe resource interface
- Add missing function pointer for DCN321 resource
- Rename DisableMinDispClkODM in dc_config
- Break after finding supported vlevel for repopulate
- Update OPP counter from new interface
- Augment display clock in dc_cap structure
- Improve code style on bios_parser2
- Skip audio config for virtual signal
- Block MPO if it prevents pstate support
- Fix DP2.0 timing sync
- Improve x86 and dmub ips handshake
- Remove guaranteed viewports limitation for odm
- Add new windowed mpo odm minimal transition sequence
- Reset stream slice count for new ODM policy
- Determine fast update only before commit minimal transition state
- Remove unused mmhub_reg_offsets
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what and why]
The logic for DisableMinDispClkODM is reversed now that odm is
disabled by default. Renaming to EnableMinDispClkODM.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change adds a method to block mpo when it would cause us to
exit pstate support. We should block mpo by default where MPO
causes issues by preventing pstate change.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a race condition between x86 and dmcub fw when attempting to exit
IPS2. Scenarios including exiting IPS2 before IPS2 has been entered. This
can cause unexpected hang when DMCUB attempt to exit while PMFW still
tries to enter IPS2.
[How]
A new design has been introduced to remove race conditions and improve the
handshake between x86 and DMCUB. An AON scratch register is borrowed from
PMFW to determine whether DMCUB has committed to IPS entry or not.
In the case when dmcub has committed IPS entry, x86 must poll until an exit
event occurred either from DMCUB(IPS1) or PMFW(IPS2). x86 will wait
upperbound of evaluation and IPS entry time to ensure IPS2 exit event has
been sent to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Use optc32 instead of optc30 in DC
- Optimize OLED T7 delay
- Multiple fixes for MST, register mas, and others
- Update driver and IPS interop
- Improve z8 watermark mask
- DCN35 updates
- Enable replay for DCN35
- Temporarily disable clock gating
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a config option to disable odm dispclk optimization for debug
purpose.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add new logs to be used by the AutoDPMTest
- Enclose AutoDPMTest logs in settings
- Add logging definition
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DCN315 fixes
- DCN31 fixes
- DPIA fixes
- Dump the pipe topology when it updates
- Misc code cleanups
- New debugfs interface to query the current ODM combine configuration
- ODM fixes
- Potential deadlock while waiting for MPC idle fix
- Support for windowed MPO ODM
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Ensure FS is enabled before sending request to DMUB for FS changes
- Add check for PMFW hard min request complete
- Save addr update in scratch before flip
- Fix static screen detection setting
- Write flip addr to scratch reg for subvp
- set minimum of VBlank_nom
- Correct unit conversion for vstartup
- Roll back unit correction
- Enable runtime register offset init for DCN32 DMUB
- Refactor edp power control
- PQ regamma end point
- PQ tail accuracy
- Expose mall capability
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To organize the edp power control a bit:
1. add flag in dc_link to indicate dc to skip all implicit eDP power control.
2. add edp_set_panel_power link service for DM to call.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve power saving feature
- Clean up for code clarity
- Fix crashing bug
- Fix pipe allocation for older ASIC
- Fix for gamut remap
- Fix 8K 60Hz display in test cases
- Fix bug in clock gating
- Improve DP2 compliance
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain retimer requires workarounds in order to correctly output test patterns.
[HOW]
Add vendor-specific aux sequences to program retimer's TX and pattern generator
when specific compliance test patterns are requested by sink.
Note: SQ128 w/a in DPMF mode only works in one flip orientation currently
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need certain conditions for replay to be enabled, so create an
interface in DM to enable/disable replay.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add new interface for notifying OS of cursor support changes
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system
1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.
2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay
Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion for vstartup
- Exit idle optimizations before attempt to access PHY
- Refactor recout calculation with a more generic formula
- Read down-spread percentage from lut to adjust dprefclk.
- Don't apply FIFO resync W/A if rdivider = 0
- Prevent invalid pipe connections
- Rearrange dmub_cmd defs order
- Add VESA SCR case for default aux backlight
- Guard DCN31 PHYD32CLK logic against chip family
- Correct grammar mistakes
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Update 128b/132b downspread factor to 0.3%
- Add helpers to get DMUB FW boot options
- Initialize necessary uninitialized variables
- Add stream overhead in BW calculations for 128b/132b
- Add link encoding to timing BW calculation parameters
- Prevent vtotal from being set to 0
- Fix race condition when turning off an output alone
- Keep PHY active for DP displays on DCN31
- Fix ASIC check in aux timeout workaround
- ABM pause toggle
- Add missing triggers for full updates
- Disable MPC split by default on special asic
- Add additional refresh rate conditions for SubVP cases
- Fix DP2 link training failure with RCO
- Reenable all root clock gating options
- Cache backlight_millinits in link structure and setting brightness accordingly
- Refine to decide the verified link setting
- Update SW cursor fallback for subvp high refresh
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allow ABM states to be transferred across display
adapters for smooth display transitions.
[how]
We call DMUB to pause and get ABM states. We
transfer data to other gpu, and deliver data and
ask ABM to un-pause.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There certain cases where the timing BW is dependent on the type of link
encoding in use. Thus to calculate the correct BW required for a given
timing, the link encoding should be added as a parameter.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current BW calculations do not account for the additional padding added
for uncompressed pixel-to-symbol packing.
This results in X.Y being too low for 128b/132b SST streams in certain
scenarios. If X.Y is too low, end user can observe image corruption.
[How]
Add function to calculate stream overhead to timing BW calculation for
128b/132b SST cases.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Setup stream encoder before link enable for TMDS
- Use is_dig_enable function instead of dcn10 hardcode
- Re-add aux intercept disable delay generically for 2+ LTTPRs
- Add polling method to handle MST reply packet
- Remove unused function
- Improve the include of header file
- Add missing static
- Hardcode vco_freq for dcn316
- Reduce stack size
- Skip enabling DMCUB when using emulation
- Check TG is non-null before checking if enabled
- Update scaler recout data for visual confirm
- Skip querying caps when DMCUB emulation is in use
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to save the cached backlight level so that display lights up using
appropriate brightness level instead of the default brightness when
waking up from s0i3.
[How]
Adding a backlight level cache in link structure. Also instead on
calling set_default_brightness_aux, check if cached values exists.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Issue not display generic, required for multiple 2+ LTTPR link configurations.
[HOW]
Revert monitor patch change and remove delay for single LTTPR case
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quash 175 kernel-doc warnings in dc.h by unmarking 2 struct
comments as containing kernel-doc notation and by spelling one
struct field correctly in a kernel-doc comment.
Fixes: 1682bd1a6b ("drm/amd/display: Expand kernel doc for DC")
Fixes: ea76895ffa ("drm/amd/display: Document pipe split policy")
Fixes: f6ae69f49f ("drm/amd/display: Include surface of unaffected streams")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: dri-devel@lists.freedesktop.org
This version brings along the following:
- Improve debugging mechanism for Gaming FAMS
- Add monitor specific edid quirks
- Fixes for Phantom pipe
- Fixes for Shapper LUT
- Clean up asserts
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To enable FAMS even during gaming sessions.
[HOW]
By leveraging a new dc.debug parameter.
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Gianna Binder <gianna.binder@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We want to limit the new fast update path to address and gamma updates
only.
- Add a check in dc_update_planes_and_stream to only take the new fast
update path if we only have the specific fast updates defined.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This display doesn't properly indicate link loss through DPCD bits such
as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE,
which all remain set.
In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases.
For these reasons, we can miss re-training the link, since we don't
properly detect link loss with this display.
[Why]
Add display-specific workaround to read DPCD204h, so that we can detect
link loss based on 128b132b-specific status bits in this register.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DCN314 fixes
- DCN32x fixes
- New fast update sequence enablement
- DC mode clock switching enablement for DCN32x
- DP link loss fix
- New debugfs entry to set MST link settings
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- DC mode clock switch interface was previously only executed
for DCN303. Enable it for DCN32x so that the interface is called
correctly
- Assign function pointers for DCN32x that are used in the dc mode
interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improvement on eDP
- PSR bug fixes
- SubVP bug fixes
- Improvements on pipe handling to address potential issues
- Freesync bug fix
- DPIA bug fix
- Fix multi-display issues
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Some EDIDs report a minimum refresh rate lower than what HW can support
How:
Add a check to calculate minimum supported refresh rate with current timing
and use that as the minimum if a lower one is passed in
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Log DP2 data to be used for debugging purposes
How:
Check the reported link rate of the DP connection and
translate it to the DP version.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Limit maximum clock speeds to DC mode limits for DC mode systems
How:
Store DC mode limits when individual clocks are initialized and
cap the values when building the clock table
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Refactor HW sequencer to use a build / execute sequence
- Also move gamma updates to become fast
v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'")
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve the message printed
- Disable dcn315 pixel rate crb when scaling
- Update SR watermarks for DCN314
- Fix dcn315 pixel rate crb scaling check
- Reset CRTC State Before Restore from S2idle
- Have Payload Properly Created After Resume
- Trigger DIO FIFO resync on commit streams
- Revert vblank change that causes null pointer crash
- Fix possible underflow for displays with large vblank
- Apply 60us prefetch for DCFCLK <= 300Mhz
- Update correct DCN314 register header
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DMUB diagnostic data was not printed out correctly.
[How]
Print the DMUB diagnostic data line by line.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
We would like to have visual confirm color support for MCLK switch.
1. Set visual confirm color to yellow: Vblank MCLK switch.
2. Set visual confirm color to cyan: FPO + Vblank MCLK
switch.
3. Set visual confirm color to pink: Vactive MCLK switch.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Some 1920x1080@60hz displays have VBLANK time > 600us which we
still want to accept for FPO + Vactive configs based on testing
- Increase max VBLANK time to 1000us to allow these configs
for FPO + Vactive
- Increase minimum vactive switch margin for FPO + Vactive to 200us
- Based on testing, 1920x1080@120hz can have a switch margin
of ~160us which requires significantly longer FPO stretch
margin (5ms) which we don't want to accept for now
- Also move margins into debug option
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Update clocks is skipped in the GPU overclock sequence
- However, we still need to update DISPCLK, DPPCLK, and DTBCLK
because the GPU overclock sequence could temporarily disable
ODM 2:1 combine because we disable all planes in the sequence
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Block SubVP on displays that have pixclk > 1800Mhz
- Block SubVP high refresh when VRR active fixed
- Enforce 60us prefetch for 200Mhz DCFCLK modes
- Check Vactive for VRR active for FPO + Vactive
- Add symclk workaround during disable link output
- Show the DCN/DCE version in the log
- Add additional pstate registers to HW state query
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- FW Release 0.0.165.0
- Add w/a to disable DP dual mode on certain ports
- Revert "Update scaler recout data for visual confirm"
- Filter out invalid bits in pipe_fuses
- Adding debug option to override Z8 watermark values
- Change default Z8 watermark values
- Workaround wrong HDR colorimetry with some receivers
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain ports on DCN3.2 configs do not properly populate the BIOS
info table flag to indicate DP dual mode is unsupported.
[How]
Add a workaround to disable DP dual mode on the ports with the missing
BIOS info table flag.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Adding debug options to override Z8 watermark values for testing purposes.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some scalers do not pick up color space updates unless the DP link
is disabled/re-enabled which can result in incorrect/washed out
HDR colors in some cases.
[How]
Call set_dpms_on to disable the link, re-train and re-enable with the
updated output color space.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC version brings along:
- Improvements in the SubVP feature
- Keep disable aux-i delay as 0
- Add p-state debugging and improvements
- Fix in secure display context creation
- add option to use custom backlight caps
- Lowering min Z8 residency time
- Restore rptr/wptr for DMCUB as workaround
- Update FW feature caps struct
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- We want to disable SubVP if Graphics Error Correction/Correcting Code
(GECC) is enabled.
- After reading feature caps from DMCUB during init, use the GECC
enable/disable info to determine if SubVP can be enabled or not.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add debug option to enable SubVP for high refresh rate displays
- For now limit the enabled modes based on a table in debug options
- Currently disabled by default
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.
[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.
dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.
Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.
The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.
Also removed registry key for controlling
extended blank feature.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SubVP on PSR panels now that we have FW support
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
32ms delay was added to resolve issue with a specific sink, however this same
delay also introduces erroneous link training failures with certain sink
devices.
[HOW]
Only apply the 32ms delay for offending devices instead of globally.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC version brings along:
- FW Release 0.0.162.0
- Enable FPO+Vactivate
- Support for VESA SCR
- Refactor DMUB commands
- Fixes in secure display, modeset, memleak and more
- Picked up missed patches in history
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Three functions in the amdgpu display driver cause -Wmissing-prototype
warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1858:6: error: no previous prototype for 'is_timing_changed' [-Werror=missing-prototypes]
is_timing_changed() is actually meant to be a global symbol, but needs
a proper name and prototype.
Fixes: 17ce8a6907 ("drm/amd/display: Add dsc pre-validation in atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When link training during engine recovery, ASSR might fail causing panel
mode to be reset to default. This should not happen for eDP as it
will prevent the panel from turning back on.
[How]
Added dp_panel_mode to struct dc_link to remember previously applied
panel mode. Do not reset panel mode to default while performing link
training if previously used panel mode = eDP.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allen Pan
Dillon Varone
Muhammad Ahmed
Aric Cyr
George Shen
Wayne Lin
Camille Cho
Nicholas Kazlauskas
Duncan Ma
Aurabindo Pillai
Sung Joon Kim
Mario Limonciello
Mounika Adhuri
Qingqing Zhuo
Sung Joon Kim
Wenjing Liu
Ovidiu Bunea
Max Tseng
Gabe Teeger
Dmytro Laktyushkin
Ethan Bitnun
Martin Leung
Mustapha Ghaddar
Ian Chen
Michael Strauss
Bhawanpreet Lakha
Alvin Lee
Reza Amini
Nicholas Susanto
Randy Dunlap
Gianna Binder
Ilya Bakoulin
Austin Zheng
Cruise Hung
Leo (Hanghong) Ma
Leo Chen
Arnd Bergmann
Michael Mityushkin