Add a new tests in sockmap_basic.c to test SK_PASS for sockmap
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-3-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three tests for struct_ops using private stack.
./test_progs -t struct_ops_private_stack
#336/1 struct_ops_private_stack/private_stack:OK
#336/2 struct_ops_private_stack/private_stack_fail:OK
#336/3 struct_ops_private_stack/private_stack_recur:OK
#336 struct_ops_private_stack:OK
The following is a snippet of a struct_ops check_member() implementation:
u32 moff = __btf_member_bit_offset(t, member) / 8;
switch (moff) {
case offsetof(struct bpf_testmod_ops3, test_1):
prog->aux->priv_stack_requested = true;
prog->aux->recursion_detected = test_1_recursion_detected;
fallthrough;
default:
break;
}
return 0;
The first test is with nested two different callback functions where the
first prog has more than 512 byte stack size (including subprogs) with
private stack enabled.
The second test is a negative test where the second prog has more than 512
byte stack size without private stack enabled.
The third test is the same callback function recursing itself. At run time,
the jit trampoline recursion check kicks in to prevent the recursion. The
recursion_detected() callback function is implemented by the bpf_testmod,
the following message in dmesg
bpf_testmod: oh no, recursing into test_1, recursion_misses 1
demonstrates the callback function is indeed triggered when recursion miss
happens.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163938.2225528-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some private stack tests are added including:
- main prog only with stack size greater than BPF_PSTACK_MIN_SIZE.
- main prog only with stack size smaller than BPF_PSTACK_MIN_SIZE.
- prog with one subprog having MAX_BPF_STACK stack size and another
subprog having non-zero small stack size.
- prog with callback function.
- prog with exception in main prog or subprog.
- prog with async callback without nesting
- prog with async callback with possible nesting
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163927.2224750-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to commit [1] sample perf events less often in
test_send_signal_nmi(). This should reduce perf events throttling.
[1] 7015843afc ("selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following invocation:
$ t1=send_signal/send_signal_perf_thread_remote \
t2=send_signal/send_signal_nmi_thread_remote \
./test_progs -t $t1,$t2
Leads to send_signal_nmi_thread_remote to be stuck
on a line 180:
/* wait for result */
err = read(pipe_c2p[0], buf, 1);
In this test case:
- perf event PERF_COUNT_HW_CPU_CYCLES is created for parent process;
- BPF program is attached to perf event, and sends a signal to child
process when event occurs;
- parent program burns some CPU in busy loop and calls read() to get
notification from child that it received a signal.
The perf event is declared with .sample_period = 1.
This forces perf to throttle events, and under some unclear conditions
the event does not always occur while parent is in busy loop.
After parent enters read() system call CPU cycles event won't be
generated for parent anymore. Thus, if perf event had not occurred
already the test is stuck.
This commit updates the parent to wait for notification with a timeout,
doing several iterations of busy loop + read_with_timeout().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit provides a watchdog timer that sets a limit of how long a
single sub-test could run:
- if sub-test runs for 10 seconds, the name of the test is printed
(currently the name of the test is printed only after it finishes);
- if sub-test runs for 120 seconds, the running thread is terminated
with SIGSEGV (to trigger crash_handler() and get a stack trace).
Specifically:
- the timer is armed on each call to run_one_test();
- re-armed at each call to test__start_subtest();
- is stopped when exiting run_one_test().
Default timeout could be overridden using '-w' or '--watchdog-timeout'
options. Value 0 can be used to turn the timer off.
Here is an example execution:
$ ./ssh-exec.sh ./test_progs -w 5 -t \
send_signal/send_signal_perf_thread_remote,send_signal/send_signal_nmi_thread_remote
WATCHDOG: test case send_signal/send_signal_nmi_thread_remote executes for 5 seconds, terminating with SIGSEGV
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x9049ef]
/lib64/libc.so.6(+0x40d00)[0x7f1f1184fd00]
/lib64/libc.so.6(read+0x4a)[0x7f1f1191cc4a]
./test_progs[0x720dd3]
./test_progs[0x71ef7a]
./test_progs(test_send_signal+0x1db)[0x71edeb]
./test_progs[0x9066c5]
./test_progs(main+0x5ed)[0x9054ad]
/lib64/libc.so.6(+0x2a088)[0x7f1f11839088]
/lib64/libc.so.6(__libc_start_main+0x8b)[0x7f1f1183914b]
./test_progs(_start+0x25)[0x527385]
#292 send_signal:FAIL
test_send_signal_common:PASS:reading pipe 0 nsec
test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
test_send_signal_common:PASS:incorrect result 0 nsec
test_send_signal_common:PASS:pipe_write 0 nsec
test_send_signal_common:PASS:setpriority 0 nsec
Timer is implemented using timer_{create,start} librt API.
Internally librt uses pthreads for SIGEV_THREAD timers,
so this change adds a background timer thread to the test process.
Because of this a few checks in tests 'bpf_iter' and 'iters'
need an update to account for an extra thread.
For parallelized scenario the watchdog is also created for each worker
fork. If one of the workers gets stuck, it would be terminated by a
watchdog. In theory, this might lead to a scenario when all worker
threads are exhausted, however this should not be a problem for
server_main(), as it would exit with some of the tests not run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139 ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c65 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Moving the definition of ENOTSUPP into bpf_util.h to remove the
duplicated definitions in multiple files.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee3 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
Testing that the session ret_handler bypass works on single
uprobe with multiple consumers, each with different session
ignore return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-12-jolsa@kernel.org
Making sure kprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-11-jolsa@kernel.org
Making sure uprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-10-jolsa@kernel.org
Adding uprobe session test that verifies the cookie value is stored
properly when single uprobe-ed function is executed recursively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-9-jolsa@kernel.org
Adding uprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-8-jolsa@kernel.org
Adding uprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-7-jolsa@kernel.org
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
New netns selftest helpers netns_new() and netns_free() has been added
in network_helpers.c, let's use them in mptcp selftests too instead of
using MPTCP's own helpers create_netns() and cleanup_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/c02fda3177b34f9e74a044833fda9761627f4d07.1730338692.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Ensure that trusted PTR_TO_BTF_ID accesses perform PROBE_MEM handling in
raw_tp program. Without the previous fix, this selftest crashes the
kernel due to a NULL-pointer dereference. Also ensure that dead code
elimination does not kick in for checks on the pointer.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Availability of the gettid definition across glibc versions supported by
BPF selftests is not certain. Currently, all users in the tree open-code
syscall to gettid. Convert them to a common macro definition.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZyP6TxUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISINz7QD/RTuJAzPJXPQmjdzMj7pepjnSQH4K
DnOc1soDqjJPSFkBAMlklDCZqSsFoNtNxagbyILrYQBC/MsV9jngimK46DEN
=pDzC
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-31
We've added 13 non-merge commits during the last 16 day(s) which contain
a total of 16 files changed, 710 insertions(+), 668 deletions(-).
The main changes are:
1) Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it, from Puranjay Mohan.
2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest
into test_progs so that it can be run in BPF CI, from Alexis Lothoré.
3) Two BPF sockmap selftest fixes, from Zijian Zhang.
4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check,
from Vincent Li.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add a selftest for bpf_csum_diff()
selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier
bpf: bpf_csum_diff: Optimize and homogenize for all archs
net: checksum: Move from32to16() to generic header
selftests/bpf: remove xdp_synproxy IP_DF check
selftests/bpf: remove test_tcp_check_syncookie
selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie
selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress
selftests/bpf: get rid of global vars in btf_skc_cls_ingress
selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress
selftests/bpf: factorize conn and syncookies tests in a single runner
selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap
selftests/bpf: Fix msg_verify_data in test_sockmap
====================
Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new subtest runs with bpf_prog_test_run_opts() as a syscall prog.
It iterates the kmem_cache using bpf_for_each loop and count the number
of entries. Finally it checks it with the number of entries from the
regular iterator.
$ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
...
#130/1 kmem_cache_iter/check_task_struct:OK
#130/2 kmem_cache_iter/check_slabinfo:OK
#130/3 kmem_cache_iter/open_coded_iter:OK
#130 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Also simplify the code by using attach routine of the skeleton.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241030222819.1800667-2-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest for the bpf_csum_diff() helper. This selftests runs the
helper in all three configurations(push, pull, and diff) and verifies
its output. The correct results have been computed by hand and by the
helper's older implementation.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241026125339.26459-5-puranjay@kernel.org
As we can see from the title, when I compiled the selftests/bpf, I
saw the error:
implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
skel->bss->tid = gettid();
^~~~~~
getgid
Directly call the syscall solves this issue.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20241029074627.80289-1-kerneljasonxing@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch tests the map creation failure when the map_value
has unsupported uptr. The three cases are the struct is larger
than one page, the struct is empty, and the struct is a kernel struct.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-13-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch test the following failures in syscall update_elem
1. The first update_elem(BPF_F_LOCK) should be EOPNOTSUPP. syscall.c takes
care of unpinning the uptr.
2. The second update_elem(BPF_EXIST) fails. syscall.c takes care of
unpinning the uptr.
3. The forth update_elem(BPF_NOEXIST) fails. bpf_local_storage_update
takes care of unpinning the uptr.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-11-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the case when uptr has a struct spanning across two
pages. It is not supported now and EOPNOTSUPP is expected from the
syscall update_elem.
It also tests the whole uptr struct located exactly at the
end of a page and ensures that this case is accepted by update_elem.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure the memory of uptrs have been mapped to the kernel properly.
Also ensure the values of uptrs in the kernel haven't been copied
to userspace.
It also has the syscall update_elem/delete_elem test to test the
pin/unpin code paths.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new subtest validating that bpf_object loaded and initialized
through generic APIs is still interoperable with BPF subskeleton,
including initialization and reading of global variables.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the "load w/o expected_attach_type" test case to
prog_tests/sock_create.c and drop the remaining test case, as it is made
redundant with the existing coverage inside prog_tests/sock_create.c.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20241022152913.574836-4-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move all BPF_CGROUP_INET6_POST_BIND and BPF_CGROUP_INET4_POST_BIND test
cases to a new prog_test, prog_tests/sock_post_bind.c, except for
LOAD_REJECT test cases.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20241022152913.574836-2-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add testcases to test bpf_send_signal_task(). In these new test cases,
the main process triggers the BPF program and the forked process
receives the signals. The target process's signal handler receives a
cookie from the bpf program.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016084136.10305-3-puranjay@kernel.org
One remaining difference between test_tcp_check_syncookie.sh and
btf_skc_cls_ingress is a small test on the mss value embedded in the
cookie generated with the eBPF helper.
Bring the corresponding test in btf_skc_cls_ingress.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-5-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress test currently checks that syncookie and
bpf_sk_assign/release helpers behave correctly in multiple scenarios,
but only with ipv6 socket.
Increase those helpers coverage by adding testing support for IPv4
sockets and IPv4/IPv6 sockets. The rework is mostly based on features
brought earlier in test_tcp_check_syncookie.sh to cover some fixes
performed on those helpers, but test_tcp_check_syncookie.sh is not
integrated in test_progs. The most notable changes linked to this are:
- some rework in the corresponding eBPF program to support both types of
traffic
- the switch from start_server to start_server_str to allow to check
some socket options
- the introduction of new subtests for ipv4 and ipv4/ipv6
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-4-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
There are a few global variables in btf_skc_cls_ingress.c, which are not
really used by different tests. Get rid of those global variables, by
performing the following updates:
- make srv_sa6 local to the main runner function
- make skel local to the main function, and propagate it through
function arguments
- get rid of duration by replacing CHECK macros with the ASSERT_XXX
macros. While updating those assert macros:
- do not return early on asserts performing some actual tests, let the
other tests run as well (keep the early return for parts handling
test setup)
- instead of converting the CHECK on skel->bss->linum, just remove it,
since there is already a call to print_err_line after the test to
print the failing line in the bpf program
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-3-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress.c currently runs two subtests, and create a
dedicated network namespace for each, but never cleans up the created
namespace once the test has ended.
Add missing namespace cleanup after each subtest to avoid accumulating
namespaces for each new subtest. While at it, switch namespace
management to netns_{new,free}
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-2-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress currently describe two tests, both running a simple
tcp server and then initializing a connection to it. The sole difference
between the tests is about the tcp_syncookie configuration, and some
checks around this feature being enabled/disabled.
Share the common code between those two tests by moving the code into a
single runner, parameterized by a "gen_cookies" argument. Split the
performed checks accordingly.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-1-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
Add a test case to ensure that attaching a tail callee program with an
freplace program fails, and that updating an extended program to a
prog_array map is also prohibited.
This test is designed to prevent the potential infinite loop issue caused
by the combination of tail calls and freplace, ensuring the correct
behavior and stability of the system.
Additionally, fix the broken tailcalls/tailcall_freplace selftest
because an extension prog should not be tailcalled.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
337/25 tailcalls/tailcall_freplace:OK
337/26 tailcalls/tailcall_bpf2bpf_freplace:OK
337 tailcalls:OK
Summary: 1/26 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds test cases for bpf_task_from_vpid() kfunc.
task_kfunc_from_vpid_no_null_check is used to test the case where
the return value is not checked for NULL pointer.
test_task_from_vpid_current is used to test obtaining the
struct task_struct of the process in the pid namespace based on vpid.
test_task_from_vpid_invalid is used to test the case of invalid vpid.
test_task_from_vpid_current and test_task_from_vpid_invalid will run
in the new namespace.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848F13435CD650AC4B7BD7099442@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test traverses all slab caches using the kmem_cache_iter and save
the data into slab_result array map. And check if current task's
pointer is from "task_struct" slab cache using bpf_get_kmem_cache().
Also compare the result array with /proc/slabinfo if available (when
CONFIG_SLUB_DEBUG is on). Note that many of the fields in the slabinfo
are transient, so it only compares the name and objsize fields.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241010232505.1339892-4-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch continues the migration and removal process for cgroup
sock_create tests to selftests.
The test being migrated verifies the ability of cgroup BPF to block the
creation of specific types of sockets using a verdict. Specifically, the
test denies socket creation when the socket is of type AF_INET{6},
SOCK_DGRAM, and IPPROTO_ICMP{V6}. If the requested socket type matches
these attributes, the cgroup BPF verdict blocks the socket creation.
As with the previous commit, this test currently lacks coverage in
selftests, so this patch migrates the functionality into the sock_create
tests under selftests. This migration ensures that the socket creation
blocking behavior with cgroup bpf program is properly tested within the
selftest framework.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch migrates the old test for cgroup BPF that sets
sk_bound_dev_if, mark, and priority when AF_INET{6} sockets are created.
The most closely related tests under selftests are 'test_sock' and
'sockopt'. However, these existing tests serve different purposes.
'test_sock' focuses mainly on verifying the socket binding process,
while 'sockopt' concentrates on testing the behavior of getsockopt and
setsockopt operations for various socket options.
Neither of these existing tests directly covers the ability of cgroup
BPF to set socket attributes such as sk_bound_dev_if, mark, and priority
during socket creation. To address this gap, this patch introduces a
migration of the old cgroup socket attribute test, now included as the
'sock_create' test in selftests/bpf. This ensures that the ability to
configure these attributes during socket creation is properly tested.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Removed unnecessary `fd = -1` assignments after closing file descriptors.
because it will be assigned by the function bpf_prog_load().This improves
code readability and removes redundant operations.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241010055737.4292-1-zhujun2@cmss.chinamobile.com
Add assertions in `bpf_link_info.uprobe_multi` test to verify that
`count` and `path_size` fields are correctly populated when the fields
are unset.
This tests a previous bug where the `path_size` field was not populated
when `path` and `path_size` were unset.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-2-wudevelops@gmail.com
xdp_cpumap_attach, in its current form, only checks that an xdp cpumap
program can be executed, but not that it performs correctly the cpu
redirect as configured by userspace (bpf_prog_test_run_opts will return
success even if the redirect program returns an error)
Add a check to ensure that the program performs the configured redirect
as well. The check is based on a global variable incremented by a
chained program executed only if the redirect program properly executes.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-3-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Current test only checks attach/detach on cpu map type program, and so
does not check that it can be properly executed, neither that it
redirects correctly.
Update the existing test to extend its coverage:
- keep the redirected program loaded
- try to execute it through bpf_prog_test_run_opts with some dummy
context
While at it, bring the following minor improvements:
- isolate test interface in its own namespace
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-2-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test case for kfuncs from multiple external modules, checking
that the correct kfuncs are called regardless of which order they're
called in. Specifically, check that calling the kfuncs in an order
different from the one the modules' BTF are loaded in works.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-3-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Existing code calls connect() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
In file included from cgroup_ancestor.c:3:
cgroup_ancestor.c: In function 'send_datagram':
cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
38 | if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) {
| ^~~~~
| |
| struct sockaddr_in6 *
./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK'
343 | long long ___res = (res); \
| ^~~
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17:
.../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *'
386 | int connect (int, const struct sockaddr *, socklen_t);
| ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This only compiles because of a glibc extension allowing declaration of the
argument as a "transparent union" which includes both types above.
Explicitly cast the argument to allow compiling for both musl and glibc.
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Fixes: f957c230e1 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008231232.634047-1-tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three success test cases to test the flattening of array of nested
struct. For these three tests, the number of special fields in map is
BTF_FIELDS_MAX, but the array is defined in structs with different
nested level.
Add one failure test case for the flattening as well. In the test case,
the number of special fields in map is BTF_FIELDS_MAX + 1. It will make
btf_parse_fields() in map_create() return -E2BIG, the creation of map
will succeed, but the load of program will fail because the btf_record
is invalid for the map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add netns cookie test that verifies the helper is now supported and work
in the context of tc programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241007095958.97442-2-mahe.tardy@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Let's bail out from consumer test after we hit first fail,
so we don't pollute the log with many instances with possibly
the same error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current xdp_devmap_attach test attaches a program
that redirects to another program via devmap.
It is, however, never executed, so do that to catch
any bugs that might occur during execution.
Also, execute the same for a veth pair so that we
also cover the non-generic path.
Warning: Running this without the bugfix in this series
will likely crash your system.
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a subtest named test_subflow in test_mptcp to load and
verify the newly added MPTCP subflow BPF program. To goal is to make
sure it is possible to set different socket options per subflows, while
the userspace socket interface only lets the application to set the same
socket options for the whole MPTCP connection and its multiple subflows.
To check that, a client and a server are started in a dedicated netns,
with veth interfaces to simulate multiple paths. They will exchange data
to allow the creation of an additional subflow.
When the different subflows are being created, the new MPTCP subflow BPF
program will set some socket options: marks and TCP CC. The validation
is done by the same program, when the userspace checks the value of the
modified socket options. On the userspace side, it will see that the
default values are still being used on the MPTCP connection, while the
BPF program will see different options set per subflow of the same MPTCP
connection.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-3-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MDwh
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI
g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI
I0WqStrK1QMbhwKPodJC1k+17jArKgw=
=jfMU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new set of tests validating behavior of capturing stack traces
with build ID. We extend uprobe_multi target binary with ability to
trigger uprobe (so that we can capture stack traces from it), but also
we allow to force build ID data to be either resident or non-resident in
memory (see also a comment about quirks of MADV_PAGEOUT).
That way we can validate that in non-sleepable context we won't get
build ID (as expected), but with sleepable uprobes we will get that
build ID regardless of it being physically present in memory.
Also, we add a small add-on linker script which reorders
.note.gnu.build-id section and puts it after (big) .text section,
putting build ID data outside of the very first page of ELF file. This
will test all the relaxations we did in build ID parsing logic in kernel
thanks to freader abstraction.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 3 test cases for skb dynptr used in tp_btf:
- test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is
read-only.
- skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb
should fail in fentry/fexit.
In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb,
test_pkt_access is used for its test_run, as in kfree_skb.c. Because the
test process is different from others, a new setup type is defined,
i.e., SETUP_SKB_PROG_TP.
The result is like:
$ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf'
#84/14 dynptr/test_dynptr_skb_tp_btf:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t 'dynptr/skb_invalid_ctx_f'
#84/85 dynptr/skb_invalid_ctx_fentry:OK
#84/86 dynptr/skb_invalid_ctx_fexit:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Also fix two coding style nits (change spaces to tabs).
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860fe ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
Recently, when compiling bpf selftests on RV64, the following
compilation failure occurred:
progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol
29 | volatile const char fallback[TCP_CA_NAME_MAX];
| ^
/workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here
86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t);
The reason is that the `fallback` symbol has been defined in
arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h
is included in bpf_dctcp. Let we rename `fallback` string to
`fallback_cc` in bpf_dctcp to fix this compilation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The idea is to run same test as for test_pid_filter_process, but instead
of standard fork-ed process we create the process with clone(CLONE_VM..)
to make sure the thread leader process filter works properly in this case.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-5-jolsa@kernel.org
The idea is to create and monitor 3 uprobes, each trigered in separate
process and make sure the bpf program gets executed just for the proper
PID specified via pid filter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-4-jolsa@kernel.org
Considering that CO-RE direct read access to the first system call
argument is already available on s390 and arm64, let's enable
test_bpf_syscall_macro:syscall_arg1 on these architectures.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240831041934.1629216-4-pulehui@huaweicloud.com
The core part of the selftest, i.e., the je <-> jmp cycle, mimics the
original sched-ext bpf program. The test will fail without the
previous patch.
I tried to create some cases for other potential cycles
(je <-> je, jmp <-> je and jmp <-> jmp) with similar pattern
to the test in this patch, but failed. So this patch
only contains one test for je <-> jmp cycle.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240904221256.37389-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Create a BTF with endianness different from host, make a distilled
base/split BTF pair from it, dump as raw bytes, import again and
verify that endianness is preserved.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240830173406.1581007-1-eddyz87@gmail.com
This patch adds test cases for iter next method returning valid
pointer, which can also used as usage examples.
Currently iter next method should return valid pointer.
iter_next_trusted is the correct usage and test if iter next method
return valid pointer. bpf_iter_task_vma_next has KF_RET_NULL flag,
so the returned pointer may be NULL. We need to check if the pointer
is NULL before using it.
iter_next_trusted_or_null is the incorrect usage. There is no checking
before using the pointer, so it will be rejected by the verifier.
iter_next_rcu and iter_next_rcu_or_null are similar test cases for
KF_RCU_PROTECTED iterators.
iter_next_rcu_not_trusted is used to test that the pointer returned by
iter next method of KF_RCU_PROTECTED iterator cannot be passed in
KF_TRUSTED_ARGS kfuncs.
iter_next_ptr_mem_not_trusted is used to test that base type
PTR_TO_MEM should not be combined with type flag PTR_TRUSTED.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848709758F6922F02AF9F1F99962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the epilogue patching when the main prog has
multiple BPF_EXIT. The verifier should have patched the 2nd (and
later) BPF_EXIT with a BPF_JA that goes back to the earlier
patched epilogue instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a pro/epilogue test when the main prog has a goto insn
that goes back to the very first instruction of the prog. It is
to test the correctness of the adjust_jmp_off(prog, 0, delta)
after the verifier has applied the prologue and/or epilogue patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25 tailcalls/tailcall_freplace:OK
328 tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiayuan Chen
Ihor Solodrai
Yonghong Song
Eduard Zingerman
Kumar Kartikeya Dwivedi
Viktor Malik
Hou Tao
Jiri Olsa
Geliang Tang
Jakub Kicinski
Namhyung Kim
Puranjay Mohan
Jason Xing
Paolo Abeni
Alexei Starovoitov
Martin KaFai Lau
Kui-Feng Lee
Andrii Nakryiko
Daniel Borkmann
Jordan Rife
Alexis Lothoré (eBPF Foundation)
Jordan Rome
Leon Hwang
Juntong Deng
Tyrone Wu
Daniel T. Lee
Zhu Jun
Simon Sundberg
Tony Ambardar
Mahe Tardy
Florian Kauer
Linus Torvalds
Philo Lu
Maxim Mikityanskiy
Pu Lehui
Lin Yikai
Feng Yang
Jeongjun Park