The peer->mtu_lock is only used to lock around writes to peer->max_data -
and nothing else; further, all such writes take place in the I/O thread and
the lock is only ever write-locked and never read-locked.
In a couple of places, the write_seqcount_begin() is wrapped in
preempt_disable/enable(), but not in all places. This can cause lockdep to
complain:
WARNING: CPU: 0 PID: 1549 at include/linux/seqlock.h:221 rxrpc_input_ack_trailer+0x305/0x430
...
RIP: 0010:rxrpc_input_ack_trailer+0x305/0x430
Fix this by just getting rid of the lock.
Fixes: eeaedc5449 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc: Fix alteration of headers whilst zerocopy pending
AF_RXRPC now uses MSG_SPLICE_PAGES to do zerocopy of the DATA packets when
it transmits them, but to reduce the number of descriptors required in the
DMA ring, it allocates a space for the protocol header in the memory
immediately before the data content so that it can include both in a single
descriptor. This is used for either the main RX header or the smaller
jumbo subpacket header as appropriate:
+----+------+
| RX | |
+-+--+DATA |
|JH| |
+--+------+
Now, when it stitches a large jumbo packet together from a number of
individual DATA packets (each of which is 1412 bytes of data), it uses the
full RX header from the first and then the jumbo subpacket header for the
rest of the components:
+---+--+------+--+------+--+------+--+------+--+------+--+------+
|UDP|RX|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |
+---+--+------+--+------+--+------+--+------+--+------+--+------+
As mentioned, the main RX header and the jumbo header overlay one another
in memory and the formats don't match, so switching from one to the other
means rearranging the fields and adjusting the flags.
However, now that TLP has been included, it wants to retransmit the last
subpacket as a new data packet on its own, which means switching between
the header formats... and if the transmission is still pending, because of
the MSG_SPLICE_PAGES, we end up corrupting the jumbo subheader.
This has a variety of effects, with the RX service number overwriting the
jumbo checksum/key number field and the RX checksum overwriting the jumbo
flags - resulting in, at the very least, a confused connection-level abort
from the peer.
Fix this by leaving the jumbo header in the allocation with the data, but
allocating the RX header from the page frag allocator and concocting it on
the fly at the point of transmission as it does for ACK packets.
Fixes: 7c48266593 ("rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2181712.1739131675@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RXRPC_CALL_SERVER_SECURING state doesn't really belong with the other
states in the call's state set as the other states govern the call's Rx/Tx
phase transition and govern when packets can and can't be received or
transmitted. The "Securing" state doesn't actually govern the reception of
packets and would need to be split depending on whether or not we've
received the last packet yet (to mirror RECV_REQUEST/ACK_REQUEST).
The "Securing" state is more about whether or not we can start forwarding
packets to the application as recvmsg will need to decode them and the
decoding can't take place until the challenge/response exchange has
completed.
Fix this by removing the RXRPC_CALL_SERVER_SECURING state from the state
set and, instead, using a flag, RXRPC_CALL_CONN_CHALLENGING, to track
whether or not we can queue the call for reception by recvmsg() or notify
the kernel app that data is ready. In the event that we've already
received all the packets, the connection event handler will poke the app
layer in the appropriate manner.
Also there's a race whereby the app layer sees the last packet before rxrpc
has managed to end the rx phase and change the state to one amenable to
allowing a reply. Fix this by queuing the packet after calling
rxrpc_end_rx_phase().
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250204230558.712536-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When userspace is adding data to an RPC call for transmission, it must pass
MSG_MORE to sendmsg() if it intends to add more data in future calls to
sendmsg(). Calling sendmsg() without MSG_MORE being asserted closes the
transmission phase of the call (assuming sendmsg() adds all the data
presented) and further attempts to add more data should be rejected.
However, this is no longer the case. The change of call state that was
previously the guard got bumped over to the I/O thread, which leaves a
window for a repeat sendmsg() to insert more data. This previously went
unnoticed, but the more recent patch that changed the structures behind the
Tx queue added a warning:
WARNING: CPU: 3 PID: 6639 at net/rxrpc/sendmsg.c:296 rxrpc_send_data+0x3f2/0x860
and rejected the additional data, returning error EPROTO.
Fix this by adding a guard flag to the call, setting the flag when we queue
the final packet and then rejecting further attempts to add data with
EPROTO.
Fixes: 2d689424b6 ("rxrpc: Move call state changes from sendmsg to I/O thread")
Reported-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6757fb68.050a0220.2477f.005f.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870480.1734037462@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an rxrpc call is in its transmission phase and is sending a lot of
packets, stalls occasionally occur that cause severe performance
degradation (eg. increasing the transmission time for a 256MiB payload from
0.7s to 2.5s over a 10G link).
rxrpc already implements TCP-style congestion control [RFC5681] and this
helps mitigate the effects, but occasionally we're missing a time event
that deals with a missing ACK, leading to a stall until the RTO expires.
Fix this by implementing RACK/TLP in rxrpc.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manage the determination of RTT on a per-call (ie. per-RPC op) basis rather
than on a per-peer basis, averaging across all calls going to that peer.
The problem is that the RTT measurements from the initial packets on a call
may be off because the server may do some setting up (such as getting a
lock on a file) before accepting the rest of the data in the RPC and,
further, the RTT may be affected by server-side file operations, for
instance if a large amount of data is being written or read.
Note: When handling the FS.StoreData-type RPCs, for example, the server
uses the userStatus field in the header of ACK packets as supplementary
flow control to aid in managing this. AF_RXRPC does not yet support this,
but it should be added.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an indicator to the rxrpc_tx_data tracepoint to indicate what triggered
the transmission of a particular packet. At this point, it's only normal
transmission and retransmission, plus the tracepoint is also used to record
loss injection, but in a future patch, TLP-induced (re-)transmission will
also be a thing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tidy up the ACK parsing in the following ways:
(1) Put the serial number of the ACK packet into the rxrpc_ack_summary
struct and access it from there whilst parsing an ACK.
(2) Be consistent about using "if (summary.acked_serial)" rather than "if
(summary.acked_serial != 0)".
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Where a spinlock is used by both the application thread and the I/O thread,
use irq-disabling locking so that an interrupt taken on the app thread
doesn't also slow down the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't allocate an rxrpc_txbuf struct for an ACK transmission. There's now
no need as the memory to hold the ACK content is allocated with a page frag
allocator. The allocation and freeing of a txbuf is just unnecessary
overhead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send jumbo DATA packets if the path-MTU probing using padded PING ACK
packets shows up sufficient capacity to do so. This allows larger chunks
of data to be sent without reducing the retryability as the subpackets in a
jumbo packet can also be retransmitted individually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the serial number set on a DATA packet at the point of transmission
in the rxrpc_txqueue struct and when an ACK is received, match the
reference number in the ACK by trawling the txqueue rather than sharing an
RTT table with ACK RTT. This can be done as part of Tx queue rotation.
This means we have a lot more RTT samples available and is faster to search
with all the serial numbers packed together into a few cachelines rather
than being hung off different txbufs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-25-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the change in the structure of the transmission buffer to store
buffers in bunches of 32 or 64 (BITS_PER_LONG) we can place sets of
per-buffer flags into the rxrpc_tx_queue struct rather than storing them in
rxrpc_tx_buf, thereby vastly increasing efficiency when assessing the SACK
table in an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-24-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust some of the names of fields and constants to make them look a bit
more like the TCP congestion symbol names, such as flight_size -> in_flight
and congest_mode to ca_state.
Move the persistent congestion-related fields from the rxrpc_ack_summary
struct into the rxrpc_call struct rather than copying them out and back in
again. The rxrpc_congest tracepoint can fetch them from the call struct.
Rename the counters for soft acks and nacks to have an 's' on the front to
reflect the softness, e.g. nr_acks -> nr_sacks.
Make fields counting numbers of packets or numbers of acks u16 rather than
u8 to allow for windows of up to 8192 DATA packets in flight in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-23-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In /proc/net/rxrpc/stats, display statistics about the numbers of different
sizes of jumbo packets transmitted and received, showing counts for 1
subpacket (ie. a non-jumbo packet), 2 subpackets, 3, ... to 8 and then 9+.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-22-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the call->acks_first_seq variable (which holds ack.firstPacket from
the latest ACK packet and indicates the sequence number of the first ack
slot in the SACK table) with call->acks_hard_ack which will hold the
highest sequence hard ACK'd. This is 1 less than call->acks_first_seq, but
it fits in the same schema as the other tracking variables which hold the
sequence of a packet, not one past it.
This will fix the rxrpc_congest tracepoint's calculation of SACK window
size which shows one fewer than it should - and will occasionally go to -1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-21-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that packets are removed from the Tx queue in the rotation function
rather than being cleaned up later, call->acks_hard_ack now advances in
step with call->tx_bottom, so remove it.
Some of the places call->acks_hard_ack is used in the rxrpc tracepoints are
replaced by call->acks_first_seq instead as that's the peer's reported idea
of the hard-ACK point.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-20-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to scan the buffers in the transmission queue occasionally when
processing ACKs, but the transmission queue is currently a linked list of
transmission buffers which, when we eventually expand the Tx window to 8192
packets will be very slow to walk.
Instead, pull the fields we need to examine a lot (last sent time,
retransmitted flag) into a new struct rxrpc_txqueue and make each one hold
an array of 32 or 64 packets.
The transmission queue is then a list of these structs, each pointing to a
contiguous set of packets. Scanning is then a lot faster as the flags and
timestamps are concentrated in the CPU dcache.
The transmission timestamps are stored as a number of microseconds from a
base ktime to reduce memory requirements. This should be fine provided we
manage to transmit an entire buffer within an hour.
This will make implementing RACK-TLP [RFC8985] easier as it will be less
costly to scan the transmission buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-19-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change how the DF flag is managed on DATA transmissions. Set it on initial
transmission and don't set it on retransmissions. Then remove the handling
for EMSGSIZE in rxrpc_send_data_packet() and just pretend it didn't happen,
leaving it to the retransmission path to retry.
The path-MTU discovery using PING ACKs is then used to probe for the
maximum DATA size - though notification by ICMP will be used if one is
received.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starvation can happen in the rxrpc I/O thread because it goes back to the
top of the I/O loop after it does any one thing without trying to give any
other connection or call CPU time. Also, because it processes one call
packet at a time, it tries to do the retransmission loop after each ACK
without checking to see if there are other ACKs already in the queue that
can update the SACK state.
Fix this by:
(1) Add a received-packet queue on each call.
(2) Distribute packets from the master Rx queue to the individual call,
conn and error queues and 'poking' calls to add them to the attend
queue first thing in the I/O thread.
(3) Go through all the attention-seeking connections and calls before
going back to the top of the I/O thread. Each queue is extracted as a
whole and then gone through so that new additions to insert themselves
into the queue.
(4) Make the call event handler go through all the packets currently on
the call's rx_queue before transmitting and retransmitting DATA
packets.
(5) Drop the skb argument from the call event handler as this is now
replaced with the rx_queue. Instead, keep track of whether we
received a packet or an ACK for the tests that used to rely on that.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare to be able to send jumbo DATA packets if the we decide to, but
don't enable that yet. This will allow larger chunks of data to be sent
without reducing the retryability as the subpackets in a jumbo packet can
also be retransmitted individually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the packet length from the data length (txb->len) stored in the
rxrpc_txbuf to make security calculations easier. Also store the
allocation size as that's an upper bound on the size of the security
wrapper and change a number of fields to unsigned short as the amount of
data can't exceed the capacity of a UDP packet.
Also, whilst we're at it, use kzalloc() for txbufs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement path-MTU probing (along the lines of RFC8899) by padding some of
the PING ACKs we send. PING ACKs get their own individual responses quite
apart from the acking of data (though, as ACKs, they fulfil that role
also).
The probing concentrates on packet sizes that correspond how many
subpackets can be stuffed inside a jumbo packet as jumbo DATA packets are
just aggregations of individual DATA packets and can be split easily for
retransmission purposes.
If we want to perform probing, we advertise this by setting the maximum
number of jumbo subpackets to 0 in the ack trailer when we send an ACK and
see if the peer is also advertising the service. This is interpreted by
non-supporting Rx stacks as an indication that jumbo packets aren't
supported.
The MTU sizes advertised in the ACK trailer AF_RXRPC transmits are pegged
at a maximum of 1444 unless pmtud is supported by both sides.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a single large kvec[] in the rxrpc_local struct rather than one in
every rxrpc_txbuf struct to build large packets to save on memory.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the REQUEST-ACK flag on the DATA packet we're about to send if we're
about to stall transmission because the app layer isn't keeping up
supplying us with data to transmit.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-8-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up the generation of the header flags when building packet headers
for transmission:
(1) Assemble the flags in a local variable rather than in the txb->flags.
(2) Do the flags masking and JUMBO-PACKET setting in one bit of code for
both the main header and the jumbo headers.
(3) Generate the REQUEST-ACK flag afresh each time. There's a possibility
we might want to do jumbo retransmission packets in future.
(4) Pass the local flags variable to the rxrpc_tx_data tracepoint rather
than the combination of the txb flags and the wire header flags (the
latter belong only to the first subpacket).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rxrpc_open_socket(), it sets up the socket and then sets up the I/O
thread that will handle it. This is a problem, however, as there's a gap
between the two phases in which a packet may come into rxrpc_encap_rcv()
from the UDP packet but we oops when trying to wake the not-yet created I/O
thread.
As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's
no I/O thread yet.
A better, but more intrusive fix would perhaps be to rearrange things such
that the socket creation is done by the I/O thread.
Fixes: a275da62e8 ("rxrpc: Create a per-local endpoint receive queue and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: yuxuanzhe@outlook.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241001132702.3122709-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 3cec055c56 ("rxrpc: Don't hold a ref for connection workqueue")
left behind rxrpc_put_client_conn().
And commit 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
removed rxrpc_accept_incoming_calls() but left declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240731100815.1277894-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac9 ("rxrpc: Fix congestion management")
Fixes: 0851115090 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract useful fields from a received ACK packet into the skb private data
early on in the process of parsing incoming packets. This makes the ACK
fields available even before we've matched the ACK up to a call and will
allow us to deal with path MTU discovery probe responses even after the
relevant call has been completed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Track the call timeouts as ktimes rather than jiffies as the latter's
granularity is too high and only set the timer at the end of the event
handling function.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Switch from keeping the transmission buffers in the rxrpc_txbuf struct and
allocated from the slab, to allocating them using page fragment allocators
(which uses raw pages), thereby allowing them to be passed to
MSG_SPLICE_PAGES and avoid copying into the UDP buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire to gain access to the
Rx protocol header. In future, the wire header will be stored in a page
frag, not in the rxrpc_txbuf struct making it possible to use
MSG_SPLICE_PAGES when sending it.
Similarly, access the ack header as being immediately after the wire header
when filling out an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Move rxrpc_send_ACK() to output.c to so that it is with
rxrpc_send_ack_packet() prior to merging the two.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Split (sub)packet preparation and timestamping out of the DATA packet
transmission function to make it easier to glue multiple txbufs together
into a jumbo DATA packet. This will require preparation and timestamping
of all the subpackets in a txbuf, and these functions provide convenient
points to place the required iteration.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a kvec[] to the rxrpc_txbuf struct to point to the contributory buffers
for a packet. Start with just a single element for now, but this will be
expanded later.
Make the ACK sending function use it, which means that rxrpc_fill_out_ack()
doesn't need to return the size of the sack table, padding and trailer.
Make the data sending code use it, both in where sendmsg() packages code up
into txbufs and where those txbufs are transmitted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a field to rxrpc_txbuf in which to store the checksum to go in the
header as this may get overwritten in the wire header struct when
transmitting as part of a jumbo packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Convert the transmission buffer flags into a mask and use | and & rather
than bitops functions (atomic ops are not required as only the I/O thread
can manipulate them once submitted for transmission).
The bottom byte can then correspond directly to the Rx protocol header
flags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Each Rx protocol packet contains a per-connection monotonically increasing
serial number used to correlate outgoing messages with their replies -
something that can be used for RTT calculation.
Note this value in the rxrpc_txbuf struct in addition to the wire header
and then log it in the rxrpc_retransmit trace for reference.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.
As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).
Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.
Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc normally has the Don't Fragment flag set on the UDP packets it
transmits, except when it has decided that DATA packets aren't getting
through - in which case it turns it off just for the DATA transmissions.
This can be a problem, however, for RESPONSE packets that convey
authentication and crypto data from the client to the server as ticket may
be larger than can fit in the MTU.
In such a case, rxrpc gets itself into an infinite loop as the sendmsg
returns an error (EMSGSIZE), which causes rxkad_send_response() to return
-EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry,
leading to the I/O thread endlessly attempting to perform the transmission.
Fix this by disabling DF on RESPONSE packets for now. The use of DF and
best data MTU determination needs reconsidering at some point in the
future.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/1581852.1704813048@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
UTS_RELEASE has a maximum length of 64 which can cause rxrpc_version to
exceed the 65 byte message limit.
Per the rx spec[1]: "If a server receives a packet with a type value of 13,
and the client-initiated flag set, it should respond with a 65-byte payload
containing a string that identifies the version of AFS software it is
running."
The current implementation causes a compile error when WERROR is turned on
and/or UTS_RELEASE exceeds the length of 49 (making the version string more
than 64 characters).
Fix this by generating the string during module initialisation and limiting
the UTS_RELEASE segment of the string does not exceed 49 chars. We need to
make sure that the 64 bytes includes "linux-" at the front and " AF_RXRPC"
at the back as this may be used in pattern matching.
Fixes: 44ba06987c ("RxRPC: Handle VERSION Rx protocol packets")
Reported-by: Kenny Ho <Kenny.Ho@amd.com>
Link: https://lore.kernel.org/r/20230523223944.691076-1-Kenny.Ho@amd.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Kenny Ho <Kenny.Ho@amd.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Lunn <andrew@lunn.ch>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Link: https://web.mit.edu/kolya/afs/rx/rx-spec [1]
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Link: https://lore.kernel.org/r/654974.1685100894@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
- Replace 0-length and 1-element arrays with flexible arrays in various
subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer size
-----BEGIN PGP SIGNATURE-----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=XnVa
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
David Howells
Yue Haibing
Linus Torvalds