Basically, dev_ifsioc() operates on the passed single netns (except
for netdev notifier chains with lower/upper devices for which we will
need more changes).
Let's hold rtnl_net_lock() for dev_ifsioc().
Now that NETDEV_CHANGENAME is always triggered under rtnl_net_lock()
of the device's netns. (do_setlink() and dev_ifsioc())
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devnet_rename_sem is no longer used since commit
0840556e5a ("net: Protect dev->name by seqlock.").
Also, RTNL serialises dev_change_name().
Let's remove devnet_rename_sem.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit forgot to add netdev_rename_lock in one of the
error paths in dev_change_name().
Let's hold netdev_rename_lock before restoring the old dev->name.
Fixes: 0840556e5a ("net: Protect dev->name by seqlock.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tool pp_alloc_fail.py tested error recovery by injecting errors
into the function page_pool_alloc_pages(). The page pool allocation
function page_pool_dev_alloc() does not end up calling
page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the
function that is called by all of the page pool alloc functions in
the API, so move error injection to that function instead.
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: reduce RTNL pressure in unregister_netdevice()
One major source of RTNL contention resides in unregister_netdevice()
Due to RCU protection of various network structures, and
unregister_netdevice() being a synchronous function,
it is calling potentially slow functions while holding RTNL.
I think we can release RTNL in two points, so that three
slow functions are called while RTNL can be used
by other threads.
v1: https://lore.kernel.org/netdev/20250107130906.098fc8d6@kernel.org/T/#m398c95f5778e1ff70938e079d3c4c43c050ad2a6
====================
Link: https://patch.msgid.link/20250114205531.967841-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One synchronize_net() call is currently done while holding RTNL.
This is source of RTNL contention in workloads adding and deleting
many network namespaces per second, because synchronize_rcu()
and synchronize_rcu_expedited() can use 60+ ms in some cases.
For cleanup_net() use, temporarily release RTNL
while calling the last synchronize_net().
This should be safe, because devices are no longer visible
to other threads after unlist_netdevice() call
and setting dev->reg_state to NETREG_UNREGISTERING.
In any case, the new netdev_lock() / netdev_unlock()
infrastructure that we are adding should allow
to fix potential issues, with a combination
of a per-device mutex and dev->reg_state awareness.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two synchronize_net() calls are currently done while holding RTNL.
This is source of RTNL contention in workloads adding and deleting
many network namespaces per second, because synchronize_rcu()
and synchronize_rcu_expedited() can use 60+ ms in some cases.
For cleanup_net() use, temporarily release RTNL
while calling the last synchronize_net().
This should be safe, because devices are no longer visible
to other threads at this point.
In any case, the new netdev_lock() / netdev_unlock()
infrastructure that we are adding should allow
to fix potential issues, with a combination
of a per-device mutex and dev->reg_state awareness.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
flush_all_backlogs() is called from unregister_netdevice_many_notify()
as part of netdevice dismantles.
This is currently called under RTNL, and can last up to 50 ms
on busy hosts.
There is no reason to hold RTNL at this stage, if our caller
is cleanup_net() : netns are no more visible, devices
are in NETREG_UNREGISTERING state and no other thread
could mess our state while RTNL is temporarily released.
In order to provide isolation, this patch provides a separate
'net_todo_list' for cleanup_net().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
flush_all_backlogs() uses per-cpu and static data to hold its
temporary data, on the assumption it is called under RTNL
protection.
Following patch in the series will break this assumption.
Use instead a dynamically allocated piece of memory.
In the unlikely case the allocation fails,
use a boot-time allocated memory.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cleanup_net() is the single thread responsible
for netns dismantles, and a serious bottleneck.
Before we can get per-netns RTNL, make sure
all synchronize_net() called from this thread
are using rcu_synchronize_expedited().
v3: deal with CONFIG_NET_NS=n
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NAPI lifetime, visibility and config are all fully under
netdev_lock protection now.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect the following members of netdev and napi by netdev_lock:
- defer_hard_irqs,
- gro_flush_timeout,
- irq_suspend_timeout.
The first two are written via sysfs (which this patch switches
to new lock), and netdev genl which holds both netdev and rtnl locks.
irq_suspend_timeout is only written by netdev genl.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Take netdev_lock() in netif_napi_set_irq(). All NAPI "control fields"
are now protected by that lock (most of the other ones are set during
napi add/del). The napi_hash_node is fully protected by the hash
spin lock, but close enough for the kdoc...
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that NAPI instances can't come and go without holding
netdev->lock we can trivially switch from rtnl_lock() to
netdev_lock() for setting netdev->threaded via sysfs.
Note that since we do not lock netdev_lock around sysfs
calls in the core we don't have to "trylock" like we do
with rtnl_lock.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prep for dropping rtnl_lock, start locking netdev->lock in netlink
genl ops. We need to be using netdev->up instead of flags & IFF_UP.
We can remove the RCU lock protection for the NAPI since NAPI list
is protected by netdev->lock already.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hold netdev->lock when NAPIs are getting added or removed.
This will allow safe access to NAPI instances of a net_device
without rtnl_lock.
Create a family of helpers which assume the lock is already taken.
Switch iavf to them, as it makes extensive use of netdev->lock,
already.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some uAPI (netdev netlink) hide net_device's sub-objects while
the interface is down to ensure uniform behavior across drivers.
To remove the rtnl_lock dependency from those uAPIs we need a way
to safely tell if the device is down or up.
Add an indication of whether device is open or closed, protected
by netdev->lock. The semantics are the same as IFF_UP, but taking
netdev_lock around every write to ->flags would be a lot of code
churn.
We don't want to blanket the entire open / close path by netdev_lock,
because it will prevent us from applying it to specific structures -
core helpers won't be able to take that lock from any function
called by the drivers on open/close paths.
So the state of the flag is "pessimistic", as in it may report false
negatives, but never false positives.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helpers for accessing netdevs under netdev_lock().
There's some careful handling needed to find the device and lock it
safely, without it getting unregistered, and without taking rtnl_lock
(the latter being the whole point of the new locking, after all).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect writes to netdev->reg_state with netdev_lock().
From now on holding netdev_lock() is sufficient to prevent
the net_device from getting unregistered, so code which
wants to hold just a single netdev around no longer needs
to hold rtnl_lock.
We do not protect the NETREG_UNREGISTERED -> NETREG_RELEASED
transition. We'd need to move mutex_destroy(netdev->lock)
to .release, but the real reason is that trying to stop
the unregistration process mid-way would be unsafe / crazy.
Taking references on such devices is not safe, either.
So the intended semantics are to lock REGISTERED devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single buffer XDP is attached, NIC should guarantee only single
page packets will be received.
tcp-data-split feature splits packets into header and payload. single
buffer XDP can't handle it properly.
So attaching single buffer XDP should be disallowed when tcp-data-split
is enabled.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-6-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If driver doesn't support ring parameter or tcp-data-split configuration
is not sufficient, the devmem should not be set up.
Before setup the devmem, tcp-data-split should be ON and hds-thresh
value should be 0.
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-4-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it.
For example, bnxt_en driver automatically enables if at least one of
LRO/GRO/JUMBO is enabled.
If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns
ENABLES of tcp-data-split, not UNKNOWN.
So, `ethtool -g eth0` shows tcp-data-split is enabled.
The problem is in the setting situation.
In the ethnl_set_rings(), it first calls get_ringparam() to get the
current driver's config.
At that moment, if driver's tcp-data-split config is UNKNOWN, it returns
ENABLE if LRO/GRO/JUMBO is enabled.
Then, it sets values from the user and driver's current config to
kernel_ethtool_ringparam.
Last it calls .set_ringparam().
The driver, especially bnxt_en driver receives
ETHTOOL_TCP_DATA_SPLIT_ENABLED.
But it can't distinguish whether it is set by the user or just the
current config.
When user updates ring parameter, the new hds_config value is updated
and current hds_config value is stored to old_hdsconfig.
Driver's .set_ringparam() callback can distinguish a passed
tcp-data-split value is came from user explicitly.
If .set_ringparam() is failed, hds_config is rollbacked immediately.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __netpoll_setup() is called directly, instead of through
netpoll_setup(), the np->skb_pool list head isn't initialized.
If skb_pool_flush() is later called, then we hit a NULL pointer
in skb_queue_purge_reason(). This can be seen with this repro,
when CONFIG_NETCONSOLE is enabled as a module:
ip tuntap add mode tap tap0
ip link add name br0 type bridge
ip link set dev tap0 master br0
modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/
rmmod netconsole
The backtrace is:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
... ... ...
Call Trace:
<TASK>
__netpoll_free+0xa5/0xf0
br_netpoll_cleanup+0x43/0x50 [bridge]
do_netpoll_cleanup+0x43/0xc0
netconsole_netdev_event+0x1e3/0x300 [netconsole]
unregister_netdevice_notifier+0xd9/0x150
cleanup_module+0x45/0x920 [netconsole]
__se_sys_delete_module+0x205/0x290
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the skb_pool list setup and initial skb fill into __netpoll_setup().
Fixes: 221a9c1df7 ("net: netpoll: Individualize the skb pool")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250114011354.2096812-1-jsperbeck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add multicast filtering support for VLAN interfaces in dual EMAC mode
for ICSSG driver.
The driver uses vlan_for_each() API to get the list of available
vlans. The driver then sync mc addr of vlan interface with a locally
mainatined list emac->vlan_mcast_list[vid] using __hw_addr_sync_multiple()
API.
__hw_addr_sync_multiple() is used instead of __hw_addr_sync() to sync
vdev->mc with local list because the sync_cnt for addresses in vdev->mc
will already be set by the vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c]
and __hw_addr_sync() only syncs when the sync_cnt == 0. Whereas
__hw_addr_sync_multiple() can sync addresses even if sync_cnt is not 0.
Export __hw_addr_sync_multiple() so that driver can use it.
Once the local list is synced, driver calls __hw_addr_sync_dev() with
the local list, vdev, sync and unsync callbacks.
__hw_addr_sync_dev() is used with the local maintained list as the list
to synchronize instead of using __dev_mc_sync() on vdev because
__dev_mc_sync() on vdev will call __hw_addr_sync_dev() on vdev->mc and
sync_cnt for addresses in vdev->mc will already be set by the
vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c] and __hw_addr_sync_dev()
only syncs if the sync_cnt of addresses in the list (vdev->mc in this case)
is 0. Whereas __hw_addr_sync_dev() on local list will work fine as the
sync_cnt for addresses in the local list will still be 0.
Based on change in addresses in the local list, sync / unsync callbacks
are invoked. In the sync / unsync API in driver, based on whether the ndev
is vlan or not, driver passes appropriate vid to FDB helper functions.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
init_dummy_netdev_core() used to cater to net_devices which
did not come from alloc_netdev_mqs(). Since that's no longer
supported remove the init logic which duplicates alloc_netdev_mqs().
While at it rename back to init_dummy_netdev().
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl lib/dump_stack.c:117
__ubsan_handle_out_of_bounds lib/ubsan.c:429
get_imix_entries net/core/pktgen.c:874
pktgen_if_write net/core/pktgen.c:1063
pde_write fs/proc/inode.c:334
proc_reg_write fs/proc/inode.c:346
vfs_write fs/read_write.c:593
ksys_write fs/read_write.c:644
do_syscall_64 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 52a62f8603 ("pktgen: Parse internet mix (imix) input")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
[ fp: allow to fill the array completely; minor changelog cleanup ]
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no module callers of dev_get_by_napi_id(),
and commit d1cacd7477 ("netdev: prevent accessing NAPI instances
from another namespace") proves that getting NAPI by id
needs to be done with care. So hide dev_get_by_napi_id().
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250110004924.3212260-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dump continuation depends on the NAPI list being sorted.
Broken netlink dump continuation may be rare and hard to debug
so add a warning if we notice the potential problem while walking
the list.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250110004505.3210140-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 86e25f40aa ("net: napi: Add napi_config") moved napi->napi_id
assignment to a later point in time (napi_hash_add_with_id). This breaks
__xdp_rxq_info_reg which copies napi_id at an earlier time and now
stores 0 napi_id. It also makes sk_mark_napi_id_once_xdp and
__sk_mark_napi_id_once useless because they now work against 0 napi_id.
Since sk_busy_loop requires valid napi_id to busy-poll on, there is no way
to busy-poll AF_XDP sockets anymore.
Bring back the ability to busy-poll on XSK by resolving socket's napi_id
at bind time. This relies on relatively recent netif_queue_set_napi,
but (assume) at this point most popular drivers should have been converted.
This also removes per-tx/rx cycles which used to check and/or set
the napi_id value.
Confirmed by running a busy-polling AF_XDP socket
(github.com/fomichev/xskrtt) on mlx5 and looking at BusyPollRxPackets
from /proc/net/netstat.
Fixes: 86e25f40aa ("net: napi: Add napi_config")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250109003436.2829560-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Drop sk's reference in both error paths.
unreferenced object 0xffff888101911800 (size 2048):
comm "test_progs", pid 44109, jiffies 4297131437
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 9336483b):
__kmalloc_noprof+0x3bf/0x560
__reuseport_alloc+0x1d/0x40
reuseport_alloc+0xca/0x150
reuseport_attach_prog+0x87/0x140
sk_reuseport_attach_bpf+0xc8/0x100
sk_setsockopt+0x1181/0x1990
do_sock_setsockopt+0x12b/0x160
__sys_setsockopt+0x7b/0xc0
__x64_sys_setsockopt+0x1b/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 64d85290d7 ("bpf: Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-reuseport-memleak-v1-1-fa1ddab0adfe@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus suggested during one of past maintainer summits (in context of
a DMA_BUF discussion) that symbol namespaces can be used to prevent
unwelcome but in-tree code from using all exported functions.
Create a namespace for netdev.
Export netdev_rx_queue_restart(), drivers may want to use it since
it gives them a simple and safe way to restart a queue to apply
config changes. But it's both too low level and too actively developed
to be used outside netdev.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netlink code depends on NAPI instances being sorted by ID on
the netdev list for dump continuation. We need to be able to
find the position on the list where we left off if dump does
not fit in a single skb, and in the meantime NAPI instances
can come and go.
This was trivially true when we were assigning a new ID to every
new NAPI instance. Since we added the NAPI config API, we try
to retain the ID previously used for the same queue, but still
add the new NAPI instance at the start of the list.
This is fine if we reset the entire netdev and all NAPIs get
removed and added back. If driver replaces a NAPI instance
during an operation like DEVMEM queue reset, or recreates
a subset of NAPI instances in other ways we may end up with
broken ordering, and therefore Netlink dumps with either
missing or duplicated entries.
At this stage the problem is theoretical. Only two drivers
support queue API, bnxt and gve. gve recreates NAPIs during
queue reset, but it doesn't support NAPI config.
bnxt supports NAPI config but doesn't recreate instances
during reset.
We need to save the ID in the config as soon as it is assigned
because otherwise the new NAPI will not know what ID it will
get at enable time, at the time it is being added.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 66e4c8d950 ("net: warn if transport header was not set")
I added a debug check in skb_transport_header() to detect
if a caller expects the transport_header to be set to a meaningful
value by a prior code path.
Unfortunately, __netif_receive_skb_core() resets the transport header
to the same value than the network header, defeating this check
in receive paths.
Pretending the transport and network headers are the same
is usually wrong.
This patch removes this reset for CONFIG_DEBUG_NET=y builds
to let fuzzers and CI find bugs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107144342.499759-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bpf_sk_storage_clone() will call bpf_selem_free() to free the clone
element when the allocation of new sock storage fails. bpf_selem_free()
will call check_and_free_fields() to free the special fields in the
element. Since the allocated element is not visible to bpf syscall or
bpf program when bpf_local_storage_alloc() fails, these special fields
in the element must be all zero when invoking bpf_selem_free().
To be uniform with other callers of bpf_selem_free(), disabling
migration when cloning sock storage. Adding migrate_{disable|enable}
pair also benefits the potential switching from kzalloc to bpf memory
allocator for sock storage.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250108010728.207536-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When destroying sock storage, it invokes bpf_local_storage_destroy() to
remove all storage elements saved in the sock storage. The destroy
procedure will call bpf_selem_free() to free the element, and
bpf_selem_free() calls bpf_obj_free_fields() to free the special fields
in map value (e.g., kptr). Since kptrs may be allocated from bpf memory
allocator, migrate_{disable|enable} pairs are necessary for the freeing
of these kptrs.
To simplify reasoning about when migrate_disable() is needed for the
freeing of these dynamically-allocated kptrs, let the caller to
guarantee migration is disabled before invoking bpf_obj_free_fields().
Therefore, the patch adds migrate_{disable|enable} pair in
bpf_sock_storage_free(). The migrate_{disable|enable} pairs in the
underlying implementation of bpf_obj_free_fields() will be removed by
The following patch.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250108010728.207536-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0f ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_net() hold RTNL before triggering the
notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that the per-netns netdev notifier is protected by per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit d7811e623d ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let's hold per-netns RTNL of dev_net(dev) in register_netdev()
and unregister_netdev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in
the next PR.
Including fixes from wireles and netfilter.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion
to GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY,
fix suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth: gve: XDP fixes around transmit, queue wakeup etc.
- eth: ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmd4FCgACgkQMUZtbf5S
IruB7hAAkppr4+4kywDq/PIqgkisjYzpNIQIrphebUeIHIcAizWbJEL9CiHXnCQD
w95+nVhzDmsWXdzE2AvwM/2YAByLP6CpgKEa+7rI3K5BQZ86lbzm+ftOOFYiF3eV
2v5yLfjgMVbzwqzuP3ivkNrtG95IGQFPobLl7tI9Wpgm3yD0+H8BCqtZNAwA4N6g
mEdZD1jMOzkdINoJBg35O70B2GDq/WSS1N8dgxtj1F7EPDuQdO1kijJmqFjYT3fw
30/NdjlfGtbFro6zp+8ZY6P9RG3CLNhYXu+nUqdOHJOJw65aXUxOPjWCRp3o6m12
HIIp22imDTvNTSCfn0wlbGJfC+v9HdIgB9gqApAaxNOS02bQgEy5tuxxXNTo2B1I
bqH7GJ+6a7axsQ6BnpcOcDhu2fnbtguj1W/zC/MlGQmZZj2g+UNCf4QqPir/XkcG
r43/iy2/L8cgZWYXzH1skfUMgbymI5uLytO+n+CLsb6P/N3WLa7wxHNV5Lni+Xng
qDyd0TwUccCr2KBfZqjgFeGbvQ7qub+eeQCYx9kUAaFhKUsQB/eZ5i9C7SsfutMa
xzwITqCkcvmdyU3gG3v/oABtQkxdTcRqWCfYDGcXm0zb1jzMf5ZGN4E/gABYM7p9
EewL1kCAt4ULmBc8Hqrj+2Erlzh+xsodvvfpgpJandMVXaJW44k=
=YKS4
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
[ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0
[ 496.310300] skb_checksum_help+0x129/0x1f0
[ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0
[ 496.310306] validate_xmit_skb+0x159/0x270
[ 496.310309] validate_xmit_skb_list+0x41/0x70
[ 496.310312] sch_direct_xmit+0x5c/0x250
[ 496.310317] __qdisc_run+0x388/0x620
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header.
Fixes: 04c20a9356 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iK1hdC3Nt8KPhOtTF8vCPc1AHDCtse_BTNki1pWxAByTQ@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250101164909.1331680-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m"
for LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of
BPF sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area
of socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ2YJABUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISINDEgD+N4uVg+rp8Z8pg9jcai4WUERmRG20
NcQTfBXczLHkwIcBALvn7NVvbTAINJzBTnukbjX3XbWFz2cJ/xHxDYXycP4I
=SwXG
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix inlining of bpf_get_smp_processor_id helper for !CONFIG_SMP
systems (Andrea Righi)
- Fix BPF USDT selftests helper code to use asm constraint "m" for
LoongArch (Tiezhu Yang)
- Fix BPF selftest compilation error in get_uprobe_offset when
PROCMAP_QUERY is not defined (Jerome Marchand)
- Fix BPF bpf_skb_change_tail helper when used in context of BPF
sockmap to handle negative skb header offsets (Cong Wang)
- Several fixes to BPF sockmap code, among others, in the area of
socket buffer accounting (Levi Zim, Zijian Zhang, Cong Wang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test bpf_skb_change_tail() in TC ingress
selftests/bpf: Introduce socket_helpers.h for TC tests
selftests/bpf: Add a BPF selftest for bpf_skb_change_tail()
bpf: Check negative offsets in __bpf_skb_min_len()
tcp_bpf: Fix copied value in tcp_bpf_sendmsg
skmsg: Return copied bytes in sk_msg_memcopy_from_iter
tcp_bpf: Add sk_rmem_alloc related logic for tcp_bpf ingress redirection
tcp_bpf: Charge receive socket buffer in bpf_tcp_ingress()
selftests/bpf: Fix compilation error in get_uprobe_offset()
selftests/bpf: Use asm constraint "m" for LoongArch
bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62d ("bpf: add bpf_skb_change_tail helper")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com
Previously sk_msg_memcopy_from_iter returns the copied bytes from the
last copy_from_iter{,_nocache} call upon success.
This commit changes it to return the total number of copied bytes on
success.
Signed-off-by: Levi Zim <rsworktech@outlook.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241130-tcp-bpf-sendmsg-v1-1-bae583d014f3@outlook.com
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down we "hide" the NAPI instances.
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241219032833.1165433-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com
Same as with converting &xdp_buff to skb on Rx, the code which allocates
a new skb and copies the XSk frame there is identical across the
drivers, so make it generic. This includes copying all the frags if they
are present in the original buff.
System percpu page_pools greatly improve XDP_PASS performance on XSk:
instead of page_alloc() + page_free(), the net core recycles the same
pages, so the only overhead left is memcpy()s. When the Page Pool is
not compiled in, the whole function is a return-NULL (but it always
gets selected when eBPF is enabled).
Note that the passed buff gets freed if the conversion is done w/o any
error, assuming you don't need this buffer after you convert it to an
skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code which builds an skb from an &xdp_buff keeps multiplying itself
around the drivers with almost no changes. Let's try to stop that by
adding a generic function.
Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head
using napi_build_skb() and make use of the available xdp_rxq pointer to
assign the Rx queue index. In case of PP-backed buffer, mark the skb to
be recycled, as every PP user's been switched to recycle skbs.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code piece which would attach a frag to &xdp_buff is almost
identical across the drivers supporting XDP multi-buffer on Rx.
Make it a generic elegant "oneliner".
Also, I see lots of drivers calculating frags_truesize as
`xdp->frame_sz * nr_frags`. I can't say this is fully correct, since
frags might be backed by chunks of different sizes, especially with
stuff like the header split. Even page_pool_alloc() can give you two
different truesizes on two subsequent requests to allocate the same
buffer size. Add a field to &skb_shared_info (unionized as there's no
free slot currently on x86_64) to track the "true" truesize. It can
be used later when updating the skb.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241218174435.1445282-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that both IPv4 and IPv6 correctly handle the new flow label
attributes, enable user space to configure FIB rules that make use of
the flow label by changing the policy to stop rejecting them and
accepting 32 bit values in big-endian byte order.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new FIB rule attributes which will allow user space to match on the
IPv6 flow label with a mask. Temporarily set the type of the attributes
to 'NLA_REJECT' while support is being added in the IPv6 code.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiao Liang reported that the cited commit changed netns handling
in newlink() of netkit, veth, and vxcan.
Before the patch, if we don't find a netns attribute in the peer
device attributes, we tried to find another netns attribute in
the outer netlink attributes by passing it to rtnl_link_get_net().
Let's restore the original behaviour.
Fixes: 4832756676 ("rtnetlink: fix double call of rtnl_link_get_net_ifla()")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCORBVVU8P6AHcEkENMj+gD2d3ce9t=A_o48E0yOQp8_wUQ@mail.gmail.com/#t
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20241216110432.51488-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify priority setting permissions with the 'sk_set_prio_allowed'
function, centralizing the validation logic. This change is made in
anticipation of a second caller in a following patch.
No functional changes.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-2-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387c ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7f ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the net_hwtstamp_validate function accessible in prevision to use
it from ethtool to validate the hwtstamp configuration before setting it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the dev_get_hwtstamp_phylib function accessible in prevision to use
it from ethtool to read the hwtstamp current configuration.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling
of __uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and
their arguments which need to be annotated as PTR_MAYBE_NULL
(Kumar Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential
error would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry
BPF programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array
access in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a
refcount imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment
RCU flavors (Jann Horn)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ13rdhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISINfqAD7B2vX6EgTFrgy7QDepQnZsmu2qjdW
fFUzPatFXXp2S3MA/16vOEoHJ4rRhBkcUK/vw3gyY5j5bYZNUTTaam5l4BcM
=gkfb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically
its the driver responsibility to dma_sync for CPU, but the driver should
not dma_sync for CPU if the netmem is actually coming from a dmabuf
memory provider.
The page_pool already exposes a helper for dma_sync_for_cpu:
page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle
netmem, and have it skip dma_sync if the memory is from a dmabuf memory
provider. Drivers should migrate to using this helper when adding
support for netmem.
Also minimize the impact on the dma syncing performance for pages. Special
case the dma-sync path for pages to not go through the overhead checks
for dma-syncing and conversion to netmem.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the `dma_map` and `dma_sync` checks to `page_pool_init` to make
them generic. Set dma_sync to false for devmem memory provider because
the dma_sync APIs should not be used for dma_buf backed devmem memory
provider.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241211212033.1684197-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
page_pool_alloc_netmem (without an s) was the mirror of
page_pool_alloc_pages (with an s), which was confusing.
Rename to page_pool_alloc_netmems so it's the mirror of
page_pool_alloc_pages.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241211212033.1684197-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, xdp_frame::mem.id was used to search for the corresponding
&page_pool to return the page correctly.
However, after that struct page was extended to have a direct pointer
to its PP (netmem has it as well), further keeping of this field makes
no sense. xdp_return_frame_bulk() still used it to do a lookup, and
this leftover is now removed.
Remove xdp_frame::mem and replace it with ::mem_type, as only memory
type still matters and we need to know it to be able to free the frame
correctly.
As a cute side effect, we can now make every scalar field in &xdp_frame
of 4 byte width, speeding up accesses to them.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main reason for this change was to allow mixing pages from different
&page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like
devmem and io_uring zerocopy Rx, it's required to have separate PPs for
header buffers and payload buffers.
Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that
they won't be tied to a particular pool. Let the latter create a
separate bulk of pages which's PP is different from the first netmem of
the bulk and process it after the main loop.
This greatly optimizes xdp_return_frame_bulk(): no more hashtable
lookups and forced flushes on PP mismatch. Also make
xdp_flush_frame_bulk() inline, as it's just one if + function call + one
u32 read, not worth extending the call ladder.
Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count)
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the last netdev iterator still using net->dev_index_head[].
Convert to modern for_each_netdev_dump() for better scalability,
and use common patterns in our stack.
Following patch in this series removes the pad field
in struct ndo_fdb_dump_context.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_fdb_dump() and various ndo_fdb_dump() helpers share
a hidden layout of cb->ctx.
Before switching rtnl_fdb_dump() to for_each_netdev_dump()
in the following patch, make this more explicit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the proper API instead of open coding it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241208234955.31910-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider a sockmap entry being updated with the same socket:
osk = stab->sks[idx];
sock_map_add_link(psock, link, map, &stab->sks[idx]);
stab->sks[idx] = sk;
if (osk)
sock_map_unref(osk, &stab->sks[idx]);
Due to sock_map_unref(), which invokes sock_map_del_link(), all the
psock's links for stab->sks[idx] are torn:
list_for_each_entry_safe(link, tmp, &psock->link, list) {
if (link->link_raw == link_raw) {
...
list_del(&link->list);
sk_psock_free_link(link);
}
}
And that includes the new link sock_map_add_link() added just before
the unref.
This results in a sockmap holding a socket, but without the respective
link. This in turn means that close(sock) won't trigger the cleanup,
i.e. a closed socket will not be automatically removed from the sockmap.
Stop tearing the links when a matching link_raw is found.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-1-1e88579e7bd5@rbox.co
Currently, page_pool_put_page_bulk() indeed takes an array of pointers
to the data, not pages, despite the name. As one side effect, when
you're freeing frags from &skb_shared_info, xdp_return_frame_bulk()
converts page pointers to virtual addresses and then
page_pool_put_page_bulk() converts them back. Moreover, data pointers
assume every frag is placed in the host memory, making this function
non-universal.
Make page_pool_put_page_bulk() handle array of netmems. Pass frag
netmems directly and use virt_to_netmem() when freeing xdpf->data,
so that the PP core will then get the compound netmem and take care
of the rest.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241203173733.3181246-9-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the system page pool usable as a source for allocating XDP
frames, we need to register it with xdp_reg_mem_model(), so that page
return works correctly. This is done in preparation for using the system
page_pool to convert XDP_PASS XSk frames to skbs; for the same reason,
make the per-cpu variable non-static so we can access it from other
source files as well (but w/o exporting).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-7-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When you register an XSk pool as XDP Rxq info memory model, you then
need to manually attach it after the registration.
Let the user combine both actions into one by just passing a pointer
to the pool directly to xdp_rxq_info_reg_mem_model(), which will take
care of calling xsk_pool_set_rxq_info(). This looks similar to how a
&page_pool gets registered and reduce repeating driver code.
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One may need to register memory model separately from xdp_rxq_info. One
simple example may be XDP test run code, but in general, it might be
useful when memory model registering is managed by one layer and then
XDP RxQ info by a different one.
Allow such scenarios by adding a simple helper which "attaches"
already registered memory model to the desired xdp_rxq_info. As this
is mostly needed for Page Pool, add a special function to do that for
a &page_pool pointer.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241203173733.3181246-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In lots of places, bpf_prog pointer is used only for tracing or other
stuff that doesn't modify the structure itself. Same for net_device.
Address at least some of them and add `const` attributes there. The
object code didn't change, but that may prevent unwanted data
modifications and also allow more helpers to have const arguments.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima
John Daley
Jakub Kicinski
Eric Dumazet
Taehee Yoo
John Sperbeck
MD Danish Anwar
Artem Chernyshev
Stanislav Fomichev
Michal Luczaj
Hou Tao
Linus Torvalds
Willem de Bruijn
Cong Wang
Levi Zim
Zijian Zhang
Alexander Lobakin
Ido Schimmel
Anna Emese Nyiri
Kory Maincent
Mina Almasry
Samiullah Khawaja
Frederic Weisbecker
Eduard Zingerman
Dan Carpenter
Toke Høiland-Jørgensen