Add a version of kvmalloc() that doesn't have the INT_MAX limit; large
filesystems do hit this.
We'll want to get rid of the in-memory bucket gens array, but we're not
there quite yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch_backpointer no longer contains the bucket_offset field, it's just a
direct LBA mapping (with low bits to account for compressed extent
splitting), so we don't need to refer to the device to construct it
anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Originally, we ran insert triggers before overwrite so that if an extent
was being moved (by fallocate insert/collapse range), the bucket sector
count wouldn't hit 0 partway through, and so we don't trigger state
changes caused by that too soon.
But this is better solved by just moving the data type change to the
alloc trigger itself, where it's already called.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't hold mark_lock while calling fsck_err() - that's a deadlock,
mark_lock is meant to be a leaf node lock.
It's also unnecessary for gc_bucket() and bucket_gen(); rcu suffices
since the bucket_gens array describes its size, and we can't race with
device removal or resize during gc/fsck since that takes state lock.
Reported-by: syzbot+38641fcbda1aaffefdd4@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The early-early allocation path, bch2_bucket_alloc_new_fs(), is no
longer needed - and inconsistencies around new_fs_bucket_idx have been a
frequent source of bugs.
Reported-by: syzbot+592425844580a6598410@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we no longer store backpointers in alloc keys, there's no reason
not to pass around bkey_i_backpointers; this means we don't have to pass
the bucket pos separately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we find an error that indicates that we need to run fsck, we can
specify that directly with run_explicit_recovery_pass().
These are now log_fsck_err() calls: we're just logging in the superblock
that an error occurred - and possibly doing an emergency shutdown,
depending on policy.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add the __counted_by compiler attribute to the flexible array member b
to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Use struct_size() to calculate the number of bytes to be allocated.
Update bucket_gens->nbuckets and bucket_gens->nbuckets_minus_first when
resizing.
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_folio_reservation_get_partial(), on partial success, will now
return a reservation that's aligned to the filesystem blocksize.
This is a partial fix for fstests generic/299 - fio verify is badly
behaved in the presence of short writes that aren't aligned to its
blocksize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add the __counted_by compiler attribute to the flexible array members
devs to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Increment nr_devs before adding a new device to the devs array and
adjust the array indexes accordingly. Add a helper macro for adding a
new device.
In bch2_journal_read(), explicitly set nr_devs to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available
Fixes: 20ac515a9c ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds another disk accounting counter to track usage per inode
number (any snapshot ID).
This will be used for a couple things:
- It'll give us a way to tell the user how much space a given file ista
consuming in all snapshots; i.e. how much extra space it's consuming
due to snapshot versioning.
- It counts number of extents and total size of extents (both in btree
keyspace sectors and actual disk usage), meaning it gives us average
extent size: that is, it'll let us cheaply find fragmented files that
should be defragmented.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
gc_lock is now only for synchronization between check_alloc_info and
interior btree updates - nothing else
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck_err() now optionally takes a btree_trans; if the current thread has
one, it is required that it be passed.
The next patch will use this to unlock when waiting for user input.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds per-compression-type accounting of compressed and uncompressed
size as well as number of extents - meaning we can now see compression
ratio (without walking the whole filesystem).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rewrite fsck/gc for the new accounting scheme.
This adds a second set of in-memory accounting counters for gc to use;
like with other parts of gc we run all trigger in TRIGGER_GC mode, then
compare what we calculated to existing in-memory accounting at the end.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reading disk accounting now requires an eytzinger lookup (see:
bch2_accounting_mem_read()), but the per-device counters are used
frequently enough that we'd like to still be able to read them with just
a percpu sum, as in the old code.
This patch special cases the device counters; when we update in-memory
accounting we also update the old style percpu counters if it's a deice
counter update.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Main part of the disk accounting rewrite.
This is a wholesale rewrite of the existing disk space accounting, which
relies on percepu counters that are sharded by journal buffer, and
rolled up and added to each journal write.
With the new scheme, every set of counters is a distinct key in the
accounting btree; this fixes scaling limitations of the old scheme,
where counters took up space in each journal entry and required multiple
percpu counters.
Now, in memory accounting requires a single set of percpu counters - not
multiple for each in flight journal buffer - and in the future we'll
probably also have counters that don't use in memory percpu counters,
they're not strictly required.
An accounting update is now a normal btree update, using the btree write
buffer path. At transaction commit time, we apply accounting updates to
the in memory counters, which are percpu counters indexed in an
eytzinger tree by the accounting key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new pseudo data type, to track buckets that are members of a
stripe, but have unstriped data in them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a separate counter to bch_alloc_v4 for amount of striped data; this
lets us separately track striped and unstriped data in a bucket, which
lets us see when erasure coding has failed to update extents with stripe
pointers, and also find buckets to continue updating if we crash mid way
through creating a new stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Use try_cmpxchg() family of functions instead of
cmpxchg (*ptr, old, new) == old. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg
(and related move instruction in front of cmpxchg).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when
cmpxchg fails. There is no need to re-read the value in the loop.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bucket_gens array and gc_buckets array known their own size; we
should be using those members, and returning an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck_err() does a goto fsck_err on error; factor out check_fix_ptr() so
that our error label can drop our device ref.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet
Thorsten Blum
Thorsten Blum
Uros Bizjak