Tag MSR_PLATFORM_INFO as a feature MSR (because it is), i.e. disallow it
from being modified after the vCPU has run.
To make KVM's selftest compliant, simply delete the userspace MSR write
that restores KVM's original value at the end of the test. Verifying that
userspace can write back what it originally read is uninteresting in this
particular case, because KVM doesn't enforce _any_ bits in the MSR, i.e.
userspace should be able to write any arbitrary value.
Link: https://lore.kernel.org/r/20240802185511.305849-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bunch all of the feature MSR initialization in kvm_arch_vcpu_create() so
that it can be easily quirked in a future patch.
No functional change intended.
Link: https://lore.kernel.org/r/20240802185511.305849-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As a result of a recent investigation, it was determined that x86 CPUs
which support 5-level paging, don't always respect CR4.LA57 when doing
canonical checks.
In particular:
1. MSRs which contain a linear address, allow full 57-bitcanonical address
regardless of CR4.LA57 state. For example: MSR_KERNEL_GS_BASE.
2. All hidden segment bases and GDT/IDT bases also behave like MSRs.
This means that full 57-bit canonical address can be loaded to them
regardless of CR4.LA57, both using MSRS (e.g GS_BASE) and instructions
(e.g LGDT).
3. TLB invalidation instructions also allow the user to use full 57-bit
address regardless of the CR4.LA57.
Finally, it must be noted that the CPU doesn't prevent the user from
disabling 5-level paging, even when the full 57-bit canonical address is
present in one of the registers mentioned above (e.g GDT base).
In fact, this can happen without any userspace help, when the CPU enters
SMM mode - some MSRs, for example MSR_KERNEL_GS_BASE are left to contain
a non-canonical address in regard to the new mode.
Since most of the affected MSRs and all segment bases can be read and
written freely by the guest without any KVM intervention, this patch makes
the emulator closely follow hardware behavior, which means that the
emulator doesn't take in the account the guest CPUID support for 5-level
paging, and only takes in the account the host CPU support.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906221824.491834-4-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add emulation flags for MSR accesses and Descriptor Tables loads, and pass
the new flags as appropriate to emul_is_noncanonical_address(). The flags
will be used to perform the correct canonical check, as the type of access
affects whether or not CR4.LA57 is consulted when determining the canonical
bit.
No functional change is intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906221824.491834-3-mlevitsk@redhat.com
[sean: split to separate patch, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add emulate_ops.is_canonical_addr() to perform (non-)canonical checks in
the emulator, which will allow extending is_noncanonical_address() to
support different flavors of canonical checks, e.g. for descriptor table
bases vs. MSRs, without needing duplicate logic in the emulator.
No functional change is intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906221824.491834-3-mlevitsk@redhat.com
[sean: separate from additional of flags, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly return '0' for guest RIP when handling a PMI VM-Exit for a vCPU
with protected guest state, i.e. when KVM can't read the real RIP. While
there is no "right" value, and profiling a protect guest is rather futile,
returning the last known RIP is worse than returning obviously "bad" data.
E.g. for SEV-ES+, the last known RIP will often point somewhere in the
guest's boot flow.
Opportunistically add WARNs to effectively assert that the in_kernel() and
get_ip() callbacks are restricted to the common PMI handler, as the return
values for the protected guest state case are largely arbitrary, i.e. only
make any sense whatsoever for PMIs, where the returned values have no
functional impact and thus don't truly matter.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241009175002.1118178-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When querying guest CPL to determine if a vCPU was preempted while in
kernel mode, bypass the register cache, i.e. always read SS.AR_BYTES from
the VMCS on Intel CPUs. If the kernel is running with full preemption
enabled, using the register cache in the preemption path can result in
stale and/or uninitialized data being cached in the segment cache.
In particular the following scenario is currently possible:
- vCPU is just created, and the vCPU thread is preempted before
SS.AR_BYTES is written in vmx_vcpu_reset().
- When scheduling out the vCPU task, kvm_arch_vcpu_in_kernel() =>
vmx_get_cpl() reads and caches '0' for SS.AR_BYTES.
- vmx_vcpu_reset() => seg_setup() configures SS.AR_BYTES, but doesn't
invoke vmx_segment_cache_clear() to invalidate the cache.
As a result, KVM retains a stale value in the cache, which can be read,
e.g. via KVM_GET_SREGS. Usually this is not a problem because the VMX
segment cache is reset on each VM-Exit, but if the userspace VMM (e.g KVM
selftests) reads and writes system registers just after the vCPU was
created, _without_ modifying SS.AR_BYTES, userspace will write back the
stale '0' value and ultimately will trigger a VM-Entry failure due to
incorrect SS segment type.
Note, the VM-Enter failure can also be avoided by moving the call to
vmx_segment_cache_clear() until after the vmx_vcpu_reset() initializes all
segments. However, while that change is correct and desirable (and will
come along shortly), it does not address the underlying problem that
accessing KVM's register caches from !task context is generally unsafe.
In addition to fixing the immediate bug, bypassing the cache for this
particular case will allow hardening KVM register caching log to assert
that the caches are accessed only when KVM _knows_ it is safe to do so.
Fixes: de63ad4cf4 ("KVM: X86: implement the logic for spinlock optimization")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Closes: https://lore.kernel.org/all/20240716022014.240960-3-mlevitsk@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241009175002.1118178-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Wrap kvm_vcpu_exit_request()'s load of vcpu->mode with READ_ONCE() to
ensure the variable is re-loaded from memory, as there is no guarantee the
caller provides the necessary annotations to ensure KVM sees a fresh value,
e.g. the VM-Exit fastpath could theoretically reuse the pre-VM-Enter value.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20240828232013.768446-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Change svm_vcpu_run() to vcpu_enter_guest() in the comment of
__kvm_set_or_clear_apicv_inhibit() to make it reflect the fact.
When one thread updates VM's APICv state due to updating the APICv
inhibit reasons, it kicks off all vCPUs and makes them wait until the
new reason has been updated and can be seen by all vCPUs.
There was one WARN() to make sure VM's APICv state is consistent with
vCPU's APICv state in the svm_vcpu_run(). Commit ee49a89329 ("KVM:
x86: Move SVM's APICv sanity check to common x86") moved that WARN() to
x86 common code vcpu_enter_guest() due to the logic is not unique to
SVM, and added comments to both __kvm_set_or_clear_apicv_inhibit() and
vcpu_enter_guest() to explain this.
However, although the comment in __kvm_set_or_clear_apicv_inhibit()
mentioned the WARN(), it seems forgot to reflect that the WARN() had
been moved to x86 common, i.e., it still mentioned the svm_vcpu_run()
but not vcpu_enter_guest(). Fix it.
Note after the change the first line that contains vcpu_enter_guest()
exceeds 80 characters, but leave it as is to make the diff clean.
Fixes: ee49a89329 ("KVM: x86: Move SVM's APICv sanity check to common x86")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/e462e7001b8668649347f879c66597d3327dbac2.1728383775.git.kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM VMX changes for 6.12:
- Set FINAL/PAGE in the page fault error code for EPT Violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
- Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
- Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
- Minor SGX fix and a cleanup.
KVM VMX and x86 PAT MSR macro cleanup for 6.12:
- Add common defines for the x86 architectural memory types, i.e. the types
that are shared across PAT, MTRRs, VMCSes, and EPTPs.
- Clean up the various VMX MSR macros to make the code self-documenting
(inasmuch as possible), and to make it less painful to add new macros.
KVM x86 MMU changes for 6.12:
- Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
- Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding MGLRU support in KVM.
- Misc cleanups
KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
The primary motivation for this series is to simplify dealing with enabling
virtualization for Intel's TDX, which needs to enable virtualization
when kvm-intel.ko is loaded, i.e. long before the first VM is created.
That said, this is a nice cleanup on its own. By registering the callbacks
on-demand, the callbacks themselves don't need to check kvm_usage_count,
because their very existence implies a non-zero count.
Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a
lock ordering issue between cpus_read_lock() and kvm_lock. The lock
ordering issue still exist in very rare cases, and will be fixed for
good by switching vm_list to an (S)RCU-protected list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename reexecute_instruction() to kvm_unprotect_and_retry_on_failure() to
make the intent and purpose of the helper much more obvious.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When retrying the faulting instruction after emulation failure, refresh
the infinite loop protection fields even if no shadow pages were zapped,
i.e. avoid hitting an infinite loop even when retrying the instruction as
a last-ditch effort to avoid terminating the guest.
Link: https://lore.kernel.org/r/20240831001538.336683-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_mmu_unprotect_gfn_and_retry() in reexecute_instruction() to pick
up protection against infinite loops, e.g. if KVM somehow manages to
encounter an unsupported instruction and unprotecting the gfn doesn't
allow the vCPU to make forward progress. Other than that, the retry-on-
failure logic is a functionally equivalent, open coded version of
kvm_mmu_unprotect_gfn_and_retry().
Note, the emulation failure path still isn't fully protected, as KVM
won't update the retry protection fields if no shadow pages are zapped
(but this change is still a step forward). That flaw will be addressed
in a future patch.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't bother unprotecting the target gfn if EMULTYPE_WRITE_PF_TO_SP is
set, as KVM will simply report the emulation failure to userspace. This
will allow converting reexecute_instruction() to use
kvm_mmu_unprotect_gfn_instead_retry() instead of kvm_mmu_unprotect_page().
Link: https://lore.kernel.org/r/20240831001538.336683-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the manual pfn look when retrying an instruction that KVM failed to
emulation in response to a #PF due to a write-protected gfn. Now that KVM
sets EMULTYPE_ALLOW_RETRY_PF if and only if the page fault hit a write-
protected gfn, i.e. if and only if there's a writable memslot, there's no
need to redo the lookup to avoid retrying an instruction that failed on
emulated MMIO (no slot, or a write to a read-only slot).
I.e. KVM will never attempt to retry an instruction that failed on
emulated MMIO, whereas that was not the case prior to the introduction of
RET_PF_WRITE_PROTECTED.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that retry_instruction() is reasonably tiny, fold it into its sole
caller, x86_emulate_instruction(). In addition to getting rid of the
absurdly confusing retry_instruction() name, handling the retry in
x86_emulate_instruction() pairs it back up with the code that resets
last_retry_{eip,address}.
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the sanity checks for EMULTYPE_ALLOW_RETRY_PF to the top of
x86_emulate_instruction(). In addition to deduplicating a small amount
of code, this makes the connection between EMULTYPE_ALLOW_RETRY_PF and
EMULTYPE_PF even more explicit, and will allow dropping retry_instruction()
entirely.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the anti-infinite-loop protection provided by last_retry_{eip,addr}
into kvm_mmu_write_protect_fault() so that it guards unprotect+retry that
never hits the emulator, as well as reexecute_instruction(), which is the
last ditch "might as well try it" logic that kicks in when emulation fails
on an instruction that faulted on a write-protected gfn.
Add a new helper, kvm_mmu_unprotect_gfn_and_retry(), to set the retry
fields and deduplicate other code (with more to come).
Link: https://lore.kernel.org/r/20240831001538.336683-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Store the gpa used to unprotect the faulting gfn for retry as a gpa_t, not
an unsigned long. This fixes a bug where 32-bit KVM would unprotect and
retry the wrong gfn if the gpa had bits 63:32!=0. In practice, this bug
is functionally benign, as unprotecting the wrong gfn is purely a
performance issue (thanks to the anti-infinite-loop logic). And of course,
almost no one runs 32-bit KVM these days.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Read RIP from vCPU state instead of pulling it from the emulation context
when filling last_retry_eip, which is part of the anti-infinite-loop
protection used when unprotecting and retrying instructions that hit a
write-protected gfn.
This will allow reusing the anti-infinite-loop protection in flows that
never make it into the emulator.
No functional change intended, as ctxt->eip is set to kvm_rip_read() in
init_emulate_ctxt(), and EMULTYPE_PF emulation is mutually exclusive with
EMULTYPE_NO_DECODE and EMULTYPE_SKIP, i.e. always goes through
x86_decode_emulated_instruction() and hasn't advanced ctxt->eip (yet).
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Resume the guest and thus skip emulation of a non-PTE-writing instruction
if and only if unprotecting the gfn actually zapped at least one shadow
page. If the gfn is write-protected for some reason other than shadow
paging, attempting to unprotect the gfn will effectively fail, and thus
retrying the instruction is all but guaranteed to be pointless. This bug
has existed for a long time, but was effectively fudged around by the
retry RIP+address anti-loop detection.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Leave nested mode before synthesizing shutdown (a.k.a. TRIPLE_FAULT) if
RSM fails when resuming L2 (a.k.a. guest mode). Architecturally, shutdown
on RSM occurs _before_ the transition back to guest mode on both Intel and
AMD.
On Intel, per the SDM pseudocode, SMRAM state is loaded before critical
VMX state:
restore state normally from SMRAM;
...
CR4.VMXE := value stored internally;
IF internal storage indicates that the logical processor had been in
VMX operation (root or non-root)
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 32.14.1;
...
restore current VMCS pointer;
FI;
AMD's APM is both less clearcut and more explicit. Because AMD CPUs save
VMCB and guest state in SMRAM itself, given the lack of anything in the
APM to indicate a shutdown in guest mode is possible, a straightforward
reading of the clause on invalid state is that _what_ state is invalid is
irrelevant, i.e. all roads lead to shutdown.
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area.
This fixes a bug found by syzkaller where synthesizing shutdown for L2
led to a nested VM-Exit (if L1 is intercepting shutdown), which in turn
caused KVM to complain about trying to cancel a nested VM-Enter (see
commit 759cbd5967 ("KVM: x86: nSVM/nVMX: set nested_run_pending on VM
entry which is a result of RSM").
Note, Paolo pointed out that KVM shouldn't set nested_run_pending until
after loading SMRAM state. But as above, that's only half the story, KVM
shouldn't transition to guest mode either. Unfortunately, fixing that
mess requires rewriting the nVMX and nSVM RSM flows to not piggyback
their nested VM-Enter flows, as executing the nested VM-Enter flows after
loading state from SMRAM would clobber much of said state.
For now, add a FIXME to call out that transitioning to guest mode before
loading state from SMRAM is wrong.
Link: https://lore.kernel.org/all/CABgObfYaUHXyRmsmg8UjRomnpQ0Jnaog9-L2gMjsjkqChjDYUQ@mail.gmail.com
Reported-by: syzbot+988d9efcdf137bc05f66@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000007a9acb06151e1670@google.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Closes: https://lore.kernel.org/all/CAMhUBjmXMYsEoVYw_M8hSZjBMHh24i88QYm-RY6HDta5YZ7Wgw@mail.gmail.com
Analyzed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Cc: Kishen Maloor <kishen.maloor@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906161337.1118412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94c ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Register the "disable virtualization in an emergency" callback just
before KVM enables virtualization in hardware, as there is no functional
need to keep the callbacks registered while KVM happens to be loaded, but
is inactive, i.e. if KVM hasn't enabled virtualization.
Note, unregistering the callback every time the last VM is destroyed could
have measurable latency due to the synchronize_rcu() needed to ensure all
references to the callback are dropped before KVM is unloaded. But the
latency should be a small fraction of the total latency of disabling
virtualization across all CPUs, and userspace can set enable_virt_at_load
to completely eliminate the runtime overhead.
Add a pointer in kvm_x86_ops to allow vendor code to provide its callback.
There is no reason to force vendor code to do the registration, and either
way KVM would need a new kvm_x86_ops hook.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename x86's the per-CPU vendor hooks used to enable virtualization in
hardware to align with the recently renamed arch hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the per-CPU hooks used to enable virtualization in hardware to
align with the KVM-wide helpers in kvm_main.c, and to better capture that
the callbacks are invoked on every online CPU.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93b ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Dohrmann <erbse.13@gmx.de>
Message-ID: <20240902144219.3716974-1-erbse.13@gmx.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a fastpath for HLT VM-Exits by immediately re-entering the guest if
it has a pending wake event. When virtual interrupt delivery is enabled,
i.e. when KVM doesn't need to manually inject interrupts, this allows KVM
to stay in the fastpath run loop when a vIRQ arrives between the guest
doing CLI and STI;HLT. Without AMD's Idle HLT-intercept support, the CPU
generates a HLT VM-Exit even though KVM will immediately resume the guest.
Note, on bare metal, it's relatively uncommon for a modern guest kernel to
actually trigger this scenario, as the window between the guest checking
for a wake event and committing to HLT is quite small. But in a nested
environment, the timings change significantly, e.g. rudimentary testing
showed that ~50% of HLT exits where HLT-polling was successful would be
serviced by this fastpath, i.e. ~50% of the time that a nested vCPU gets
a wake event before KVM schedules out the vCPU, the wake event was pending
even before the VM-Exit.
Link: https://lore.kernel.org/all/20240528041926.3989-3-manali.shukla@amd.com
Link: https://lore.kernel.org/r/20240802195120.325560-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Shuffle code around in x86.c so that the various helpers related to vCPU
blocking/running logic are (a) located near each other and (b) ordered so
that HLT emulation can use kvm_vcpu_has_events() in a future path.
No functional change intended.
Link: https://lore.kernel.org/r/20240802195120.325560-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Exit to userspace if a fastpath handler triggers such an exit, which can
happen when skipping the instruction, e.g. due to userspace
single-stepping the guest via KVM_GUESTDBG_SINGLESTEP or because of an
emulation failure.
Fixes: 404d5d7bff ("KVM: X86: Introduce more exit_fastpath_completion enum values")
Link: https://lore.kernel.org/r/20240802195120.325560-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the WRMSR fastpath for x2APIC_ICR and TSC_DEADLINE are identical,
ignoring the backend MSR handling, consolidate the common bits of skipping
the instruction and setting the return value.
No functional change intended.
Link: https://lore.kernel.org/r/20240802195120.325560-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Re-enter the guest in the fastpath if WRMSR emulation for x2APIC's ICR is
successful, as no additional work is needed, i.e. there is no code unique
for WRMSR exits between the fastpath and the "!= EXIT_FASTPATH_NONE" check
in __vmx_handle_exit().
Link: https://lore.kernel.org/r/20240802195120.325560-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's suppression of userspace MSR access failures to MSRs that KVM
reports as emulated, but are ultimately unsupported, e.g. if the VMX MSRs
are emulated by KVM, but are unsupported given the vCPU model.
Suggested-by: Weijiang Yang <weijiang.yang@intel.com>
Reviewed-by: Weijiang Yang <weijiang.yang@intel.com>
Link: https://lore.kernel.org/r/20240802181935.292540-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's suppression of failures due to a userspace access to an
unsupported, but advertised as a "to save" MSR to all MSRs, not just those
that happen to reach the default case statements in kvm_get_msr_common()
and kvm_set_msr_common(). KVM's soon-to-be-established ABI is that if an
MSR is advertised to userspace, then userspace is allowed to read the MSR,
and write back the value that was read, i.e. why an MSR is unsupported
doesn't change KVM's ABI.
Practically speaking, this is very nearly a nop, as the only other paths
that return KVM_MSR_RET_UNSUPPORTED are {svm,vmx}_get_feature_msr(), and
it's unlikely, though not impossible, that userspace is using KVM_GET_MSRS
on unsupported MSRs.
The primary goal of moving the suppression to common code is to allow
returning KVM_MSR_RET_UNSUPPORTED as appropriate throughout KVM, without
having to manually handle the "is userspace accessing an advertised"
waiver. I.e. this will allow formalizing KVM's ABI without incurring a
high maintenance cost.
Link: https://lore.kernel.org/r/20240802181935.292540-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the definitions of the various MSR arrays above kvm_do_msr_access()
so that kvm_do_msr_access() can query the arrays when handling failures,
e.g. to squash errors if userspace tries to read an MSR that isn't fully
supported, but that KVM advertised as being an MSR-to-save.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a common helper, kvm_do_msr_access(), to invoke the "leaf" APIs that
are type and access specific, and more importantly to handle errors that
are returned from the leaf APIs. I.e. turn kvm_msr_ignored_check() from a
a helper that is called on an error, into a trampoline that detects errors
*and* applies relevant side effects, e.g. logging unimplemented accesses.
Because the leaf APIs are used for guest accesses, userspace accesses, and
KVM accesses, and because KVM supports restricting access to MSRs from
userspace via filters, the error handling is subtly non-trivial. E.g. KVM
has had at least one bug escape due to making each "outer" function handle
errors. See commit 3376ca3f1a ("KVM: x86: Fix KVM_GET_MSRS stack info
leak").
Link: https://lore.kernel.org/r/20240802181935.292540-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor kvm_get_feature_msr() to take the components of kvm_msr_entry as
separate parameters, along with a vCPU pointer, i.e. to give it the same
prototype as kvm_{g,s}et_msr_ignored_check(). This will allow using a
common inner helper for handling accesses to "regular" and feature MSRs.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename all APIs related to feature MSRs from get_msr_feature() to
get_feature_msr(). The APIs get "feature MSRs", not "MSR features".
And unlike kvm_{g,s}et_msr_common(), the "feature" adjective doesn't
describe the helper itself.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor get_msr_feature() to take the index and data pointer as distinct
parameters in anticipation of eliminating "struct kvm_msr_entry" usage
further up the primary callchain.
No functional change intended.
Link: https://lore.kernel.org/r/20240802181935.292540-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the "INVALID" internal MSR error return code to "UNSUPPORTED" to
try and make it more clear that access was denied because the MSR itself
is unsupported/unknown. "INVALID" is too ambiguous, as it could just as
easily mean the value for WRMSR as invalid.
Avoid UNKNOWN and UNIMPLEMENTED, as the error code is used for MSRs that
_are_ actually implemented by KVM, e.g. if the MSR is unsupported because
an associated feature flag is not present in guest CPUID.
Opportunistically beef up the comments for the internal MSR error codes.
Link: https://lore.kernel.org/r/20240802181935.292540-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use this_cpu_ptr() instead of open coding the equivalent in
kvm_user_return_msr_cpu_online.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Link: https://lore.kernel.org/r/87zfp96ojk.wl-me@linux.beauty
Signed-off-by: Sean Christopherson <seanjc@google.com>
Synthesize a consistency check VM-Exit (VM-Enter) or VM-Abort (VM-Exit) if
L1 attempts to load/store an MSR via the VMCS MSR lists that userspace has
disallowed access to via an MSR filter. Intel already disallows including
a handful of "special" MSRs in the VMCS lists, so denying access isn't
completely without precedent.
More importantly, the behavior is well-defined _and_ can be communicated
the end user, e.g. to the customer that owns a VM running as L1 on top of
KVM. On the other hand, ignoring userspace MSR filters is all but
guaranteed to result in unexpected behavior as the access will hit KVM's
internal state, which is likely not up-to-date.
Unlike KVM-internal accesses, instruction emulation, and dedicated VMCS
fields, the MSRs in the VMCS load/store lists are 100% guest controlled,
thus making it all but impossible to reason about the correctness of
ignoring the MSR filter. And if userspace *really* wants to deny access
to MSRs via the aforementioned scenarios, userspace can hide the
associated feature from the guest, e.g. by disabling the PMU to prevent
accessing PERF_GLOBAL_CTRL via its VMCS field. But for the MSR lists, KVM
is blindly processing MSRs; the MSR filters are the _only_ way for
userspace to deny access.
This partially reverts commit ac8d6cad3c ("KVM: x86: Only do MSR
filtering when access MSR by rdmsr/wrmsr").
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Cc: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240722235922.3351122-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the stuffing of the vCPU's PAT to the architectural "default" value
from kvm_arch_vcpu_create() to kvm_vcpu_reset(), guarded by !init_event,
to better capture that the default value is the value "Following Power-up
or Reset". E.g. setting PAT only during creation would break if KVM were
to expose a RESET ioctl() to userspace (which is unlikely, but that's not
a good reason to have unintuitive code).
No functional change.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240605231918.2915961-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK>
Fixes: f7e570780e ("KVM: x86: Forcibly leave nested virt when SMM state is toggled")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240723232055.3643811-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use this_cpu_ptr() instead of open coding the equivalent in various
user return MSR helpers.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240802201630.339306-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is enough to return 0 if a guest need not do any preparation.
This is in fact how sev_gmem_prepare() works for non-SNP guests,
and it extends naturally to Intel hosts: the x86 callback for
gmem_prepare is optional and returns 0 if not defined.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add "ARCH" to the symbols; shortly, the "prepare" phase will include both
the arch-independent step to clear out contents left in the page by the
host, and the arch-dependent step enabled by CONFIG_HAVE_KVM_GMEM_PREPARE.
For consistency do the same for CONFIG_HAVE_KVM_GMEM_INVALIDATE as well.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_PRE_FAULT_MEMORY for an SNP guest can race with
sev_gmem_post_populate() in bad ways. The following sequence for
instance can potentially trigger an RMP fault:
thread A, sev_gmem_post_populate: called
thread B, sev_gmem_prepare: places below 'pfn' in a private state in RMP
thread A, sev_gmem_post_populate: *vaddr = kmap_local_pfn(pfn + i);
thread A, sev_gmem_post_populate: copy_from_user(vaddr, src + i * PAGE_SIZE, PAGE_SIZE);
RMP #PF
Fix this by only allowing KVM_PRE_FAULT_MEMORY to run after a guest's
initial private memory contents have been finalized via
KVM_SEV_SNP_LAUNCH_FINISH.
Beyond fixing this issue, it just sort of makes sense to enforce this,
since the KVM_PRE_FAULT_MEMORY documentation states:
"KVM maps memory as if the vCPU generated a stage-2 read page fault"
which sort of implies we should be acting on the same guest state that a
vCPU would see post-launch after the initial guest memory is all set up.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces kvm_x86_call(), to streamline the usage of static calls of
kvm_x86_ops. The current implementation of these calls is verbose and
could lead to alignment challenges. This makes the code susceptible to
exceeding the "80 columns per single line of code" limit as defined in
the coding-style document. Another issue with the existing implementation
is that the addition of kvm_x86_ prefix to hooks at the static_call sites
hinders code readability and navigation. kvm_x86_call() is added to
improve code readability and maintainability, while adhering to the coding
style guidelines.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Reported-by: syzbot+2fb9f8ed752c01bc9a3f@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240712144841.1230591-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=W1/6
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.11
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
-----BEGIN PGP SIGNATURE-----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=pJxP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86/pmu changes for 6.11
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD
hack, and instead always honor guest PAT on CPUs that support self-snoop.
-----BEGIN PGP SIGNATURE-----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=yb10
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mtrrs-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MTRR virtualization removal
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD
hack, and instead always honor guest PAT on CPUs that support self-snoop.
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
Wire KVM_PRE_FAULT_MEMORY ioctl to kvm_mmu_do_page_fault() to populate guest
memory. It can be called right after KVM_CREATE_VCPU creates a vCPU,
since at that point kvm_mmu_create() and kvm_init_mmu() are called and
the vCPU is ready to invoke the KVM page fault handler.
The helper function kvm_tdp_map_page() takes care of the logic to
process RET_PF_* return values and convert them to success or errno.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9b866a0ae7147f96571c439e75429a03dcb659b6.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some variables allocated in kvm_arch_vcpu_ioctl are released when
the function exits, so there is no need to set GFP_KERNEL_ACCOUNT.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20240624012016.46133-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refine the macros which define maximum General Purpose (GP) and fixed
counter numbers.
Currently the macro KVM_INTEL_PMC_MAX_GENERIC is used to represent the
maximum supported General Purpose (GP) counter number ambiguously across
Intel and AMD platforms. This would cause issues if AMD begins to support
more GP counters than Intel.
Thus a bunch of new macros including vendor specific and vendor
independent are introduced to replace the old macros. The vendor
independent macros are used in x86 common code to hide vendor difference
and eliminate the ambiguity.
No logic changes are introduced in this patch.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-1-dapeng1.mi@linux.intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
WARN if a blocking vCPU is awakened by a valid wake event that KVM can't
inject, e.g. because KVM needs to complete a nested VM-enter, or needs to
re-inject an exception. For the nested VM-Enter case, KVM is supposed to
clear "nested_run_pending" if L1 puts L2 into HLT, i.e. entering HLT
"completes" the nested VM-Enter. And for already-injected exceptions, it
should be impossible for the vCPU to be in a blocking state if a VM-Exit
occurred while an exception was being vectored.
Link: https://lore.kernel.org/r/20240607172609.3205077-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check for a Requested Virtual Interrupt, i.e. a virtual interrupt that is
pending delivery, in vmx_has_nested_events() and drop the one-off
kvm_x86_ops.guest_apic_has_interrupt() hook.
In addition to dropping a superfluous hook, this fixes a bug where KVM
would incorrectly treat virtual interrupts _for L2_ as always enabled due
to kvm_arch_interrupt_allowed(), by way of vmx_interrupt_blocked(),
treating IRQs as enabled if L2 is active and vmcs12 is configured to exit
on IRQs, i.e. KVM would treat a virtual interrupt for L2 as a valid wake
event based on L1's IRQ blocking status.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When requesting an immediate exit from L2 in order to inject a pending
event, do so only if the pending event actually requires manual injection,
i.e. if and only if KVM actually needs to regain control in order to
deliver the event.
Avoiding the "immediate exit" isn't simply an optimization, it's necessary
to make forward progress, as the "already expired" VMX preemption timer
trick that KVM uses to force a VM-Exit has higher priority than events
that aren't directly injected.
At present time, this is a glorified nop as all events processed by
vmx_has_nested_events() require injection, but that will not hold true in
the future, e.g. if there's a pending virtual interrupt in vmcs02.RVI.
I.e. if KVM is trying to deliver a virtual interrupt to L2, the expired
VMX preemption timer will trigger VM-Exit before the virtual interrupt is
delivered, and KVM will effectively hang the vCPU in an endless loop of
forced immediate VM-Exits (because the pending virtual interrupt never
goes away).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Sync pending posted interrupts to the IRR prior to re-scanning I/O APIC
routes, irrespective of whether the I/O APIC is emulated by userspace or
by KVM. If a level-triggered interrupt routed through the I/O APIC is
pending or in-service for a vCPU, KVM needs to intercept EOIs on said
vCPU even if the vCPU isn't the destination for the new routing, e.g. if
servicing an interrupt using the old routing races with I/O APIC
reconfiguration.
Commit fceb3a36c2 ("KVM: x86: ioapic: Fix level-triggered EOI and
userspace I/OAPIC reconfigure race") fixed the common cases, but
kvm_apic_pending_eoi() only checks if an interrupt is in the local
APIC's IRR or ISR, i.e. misses the uncommon case where an interrupt is
pending in the PIR.
Failure to intercept EOI can manifest as guest hangs with Windows 11 if
the guest uses the RTC as its timekeeping source, e.g. if the VMM doesn't
expose a more modern form of time to the guest.
Cc: stable@vger.kernel.org
Cc: Adamos Ttofari <attofari@amazon.de>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240611014845.82795-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If the BSP vCPU ID was already set, ensure it doesn't get excluded when
limiting vCPU IDs via KVM_CAP_MAX_VCPU_ID.
[mks: provide commit message, code by Sean]
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-4-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Do not accept IDs which are definitely invalid by limit checking the
passed value against KVM_MAX_VCPU_IDS and 'max_vcpu_ids' if it was
already set.
This ensures invalid values, especially on 64-bit systems, don't go
unnoticed and lead to a valid id by chance when truncated by the final
assignment.
Fixes: 73880c80aa ("KVM: Break dependency between vcpu index in vcpus array and vcpu_id.")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-3-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM unconditionally sets l1tf_flush_l1d in kvm_arch_vcpu_load(),
drop the redundant store from vcpu_run(). The flag is cleared only when
VM-Enter is imminent, deep below vcpu_run(), i.e. barring a KVM bug, it's
impossible for l1tf_flush_l1d to be cleared between loading the vCPU and
calling vcpu_run().
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Always set l1tf_flush_l1d during kvm_arch_vcpu_load() instead of setting
it only when the vCPU is being scheduled back in. The flag is processed
only when VM-Enter is imminent, and KVM obviously needs to load the vCPU
before VM-Enter, so attempting to precisely set l1tf_flush_l1d provides no
meaningful value. I.e. the flag _will_ be set either way, it's simply a
matter of when.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete kvm_arch_sched_in() now that all implementations are nops.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the guts of kvm_arch_sched_in() into kvm_arch_vcpu_load(), keying
off the recently added kvm_vcpu.scheduled_out as appropriate.
Note, there is a very slight functional change, as PLE shrink updates will
now happen after blasting WBINVD, but that is quite uninteresting as the
two operations do not interact in any way.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM sets up empty IRQ routing during VM creation, don't recreate
empty routing during KVM_CAP_SPLIT_IRQCHIP. Setting IRQ routes during
KVM_CAP_SPLIT_IRQCHIP can result in 20+ milliseconds of delay due to the
synchronize_srcu_expedited() call in kvm_set_irq_routing().
Note, the empty routing is guaranteed to be intact as KVM x86 only allows
changing the IRQ routing after an in-kernel IRQCHIP has been created, and
KVM_CAP_SPLIT_IRQCHIP is disallowed after creating an IRQCHIP.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Link: https://lore.kernel.org/r/20240506101751.3145407-3-foxywang@tencent.com
[sean: massage changelog, remove unused empty_routing array]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When a vCPU is interrupted by a signal while running a nested guest,
KVM will exit to userspace with L2 state. However, userspace has no
way to know whether it sees L1 or L2 state (besides calling
KVM_GET_STATS_FD, which does not have a stable ABI).
This causes multiple problems:
The simplest one is L2 state corruption when userspace marks the sregs
as dirty. See this mailing list thread [1] for a complete discussion.
Another problem is that if userspace decides to continue by emulating
instructions, it will unknowingly emulate with L2 state as if L1
doesn't exist, which can be considered a weird guest escape.
Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data
structure, which is set when the vCPU exited while running a nested
guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to
advertise the functionality to userspace.
[1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use guest_cpuid_is_intel_compatible() to determine whether SYSCALL in
32-bit Protected Mode (including Compatibility Mode) should #UD or succeed.
The existing code already does the exact equivalent of
guest_cpuid_is_intel_compatible(), just in a rather roundabout way.
No functional change intended.
Link: https://lore.kernel.org/r/20240405235603.1173076-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Treat code #DBs as inhibited in MOV/POP-SS shadows for vCPU models that
are Intel compatible, not just strictly vCPUs with vendor==Intel. The
behavior is explicitly called out in the SDM, and thus architectural, i.e.
applies to all CPUs that implement Intel's architecture, and isn't a quirk
that is unique to CPUs manufactured by Intel:
However, if an instruction breakpoint is placed on an instruction located
immediately after a POP SS/MOV SS instruction, the breakpoint will be
suppressed as if EFLAGS.RF were 1.
Applying the behavior strictly to Intel wasn't intentional, KVM simply
didn't have a concept of "Intel compatible" as of commit baf67ca8e5
("KVM: x86: Suppress code #DBs on Intel if MOV/POP SS blocking is active").
Link: https://lore.kernel.org/r/20240405235603.1173076-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend Intel's check on MSR_TSC_AUX[63:32] to all vCPU models that are
Intel compatible, i.e. aren't AMD or Hygon in KVM's world, as the behavior
is architectural, i.e. applies to any CPU that is compatible with Intel's
architecture. Applying the behavior strictly to Intel wasn't intentional,
KVM simply didn't have a concept of "Intel compatible" as of commit
61a05d444d ("KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to
guest CPU model").
Link: https://lore.kernel.org/r/20240405235603.1173076-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure a full memory barrier is emitted in the VM-Exit path, as a full
barrier is required on Intel CPUs to evict WC buffers. This will allow
unconditionally honoring guest PAT on Intel CPUs that support self-snoop.
As srcu_read_lock() is always called in the VM-Exit path and it internally
has a smp_mb(), call smp_mb__after_srcu_read_lock() to avoid adding a
second fence and make sure smp_mb() is called without dependency on
implementation details of srcu_read_lock().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
[sean: massage changelog]
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop KVM's emulation of CR0.CD=1 on Intel CPUs now that KVM no longer
honors guest MTRR memtypes, as forcing UC memory for VMs with
non-coherent DMA only makes sense if the guest is using something other
than PAT to configure the memtype for the DMA region.
Furthermore, KVM has forced WB memory for CR0.CD=1 since commit
fb279950ba ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED"), and no known
VMM in existence disables KVM_X86_QUIRK_CD_NW_CLEARED, let alone does
so with non-coherent DMA.
Lastly, commit fb279950ba ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") was
from the same author as commit b18d5431ac ("KVM: x86: fix CR0.CD
virtualization"), and followed by a mere month. I.e. forcing UC memory
was likely the result of code inspection or perhaps misdiagnosed failures,
and not the necessitate by a concrete use case.
Update KVM's documentation to note that KVM_X86_QUIRK_CD_NW_CLEARED is now
AMD-only, and to take an erratum for lack of CR0.CD virtualization on
Intel.
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's support for virtualizing guest MTRR memtypes, as full MTRR
adds no value, negatively impacts guest performance, and is a maintenance
burden due to it's complexity and oddities.
KVM's approach to virtualizating MTRRs make no sense, at all. KVM *only*
honors guest MTRR memtypes if EPT is enabled *and* the guest has a device
that may perform non-coherent DMA access. From a hardware virtualization
perspective of guest MTRRs, there is _nothing_ special about EPT. Legacy
shadowing paging doesn't magically account for guest MTRRs, nor does NPT.
Unwinding and deciphering KVM's murky history, the MTRR virtualization
code appears to be the result of misdiagnosed issues when EPT + VT-d with
passthrough devices was enabled years and years ago. And importantly, the
underlying bugs that were fudged around by honoring guest MTRR memtypes
have since been fixed (though rather poorly in some cases).
The zapping GFNs logic in the MTRR virtualization code came from:
commit efdfe536d8
Author: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Date: Wed May 13 14:42:27 2015 +0800
KVM: MMU: fix MTRR update
Currently, whenever guest MTRR registers are changed
kvm_mmu_reset_context is called to switch to the new root shadow page
table, however, it's useless since:
1) the cache type is not cached into shadow page's attribute so that
the original root shadow page will be reused
2) the cache type is set on the last spte, that means we should sync
the last sptes when MTRR is changed
This patch fixs this issue by drop all the spte in the gfn range which
is being updated by MTRR
which was a fix for:
commit 0bed3b568b
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Thu Oct 9 16:01:54 2008 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Wed Dec 31 16:51:44 2008 +0200
KVM: Improve MTRR structure
As well as reset mmu context when set MTRR.
which was part of a "MTRR/PAT support for EPT" series that also added:
+ if (mt_mask) {
+ mt_mask = get_memory_type(vcpu, gfn) <<
+ kvm_x86_ops->get_mt_mask_shift();
+ spte |= mt_mask;
+ }
where get_memory_type() was a truly gnarly helper to retrieve the guest
MTRR memtype for a given memtype. And *very* subtly, at the time of that
change, KVM *always* set VMX_EPT_IGMT_BIT,
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT |
VMX_EPT_IGMT_BIT);
which came in via:
commit 928d4bf747
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Thu Nov 6 14:55:45 2008 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Tue Nov 11 21:00:37 2008 +0200
KVM: VMX: Set IGMT bit in EPT entry
There is a potential issue that, when guest using pagetable without vmexit when
EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory,
which would be inconsistent with host side and would cause host MCE due to
inconsistent cache attribute.
The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default
memory type to protect host (notice that all memory mapped by KVM should be WB).
Note the CommitDates! The AuthorDates strongly suggests Sheng Yang added
the whole "ignoreIGMT things as a bug fix for issues that were detected
during EPT + VT-d + passthrough enabling, but it was applied earlier
because it was a generic fix.
Jumping back to 0bed3b568b ("KVM: Improve MTRR structure"), the other
relevant code, or rather lack thereof, is the handling of *host* MMIO.
That fix came in a bit later, but given the author and timing, it's safe
to say it was all part of the same EPT+VT-d enabling mess.
commit 2aaf69dcee
Author: Sheng Yang <sheng@linux.intel.com>
AuthorDate: Wed Jan 21 16:52:16 2009 +0800
Commit: Avi Kivity <avi@redhat.com>
CommitDate: Sun Feb 15 02:47:37 2009 +0200
KVM: MMU: Map device MMIO as UC in EPT
Software are not allow to access device MMIO using cacheable memory type, the
patch limit MMIO region with UC and WC(guest can select WC using PAT and
PCD/PWT).
In addition to the host MMIO and IGMT issues, KVM's MTRR virtualization
was obviously never tested on NPT until much later, which lends further
credence to the theory/argument that this was all the result of
misdiagnosed issues.
Discussion from the EPT+MTRR enabling thread[*] more or less confirms that
Sheng Yang was trying to resolve issues with passthrough MMIO.
* Sheng Yang
: Do you mean host(qemu) would access this memory and if we set it to guest
: MTRR, host access would be broken? We would cover this in our shadow MTRR
: patch, for we encountered this in video ram when doing some experiment with
: VGA assignment.
And in the same thread, there's also what appears to be confirmation of
Intel running into issues with Windows XP related to a guest device driver
mapping DMA with WC in the PAT.
* Avi Kavity
: Sheng Yang wrote:
: > Yes... But it's easy to do with assigned devices' mmio, but what if guest
: > specific some non-mmio memory's memory type? E.g. we have met one issue in
: > Xen, that a assigned-device's XP driver specific one memory region as buffer,
: > and modify the memory type then do DMA.
: >
: > Only map MMIO space can be first step, but I guess we can modify assigned
: > memory region memory type follow guest's?
: >
:
: With ept/npt, we can't, since the memory type is in the guest's
: pagetable entries, and these are not accessible.
[*] https://lore.kernel.org/all/1223539317-32379-1-git-send-email-sheng@linux.intel.com
So, for the most part, what likely happened is that 15 years ago, a few
engineers (a) fixed a #MC problem by ignoring guest PAT and (b) initially
"fixed" passthrough device MMIO by emulating *guest* MTRRs. Except for
the below case, everything since then has been a result of those two
intertwined changes.
The one exception, which is actually yet more confirmation of all of the
above, is the revert of Paolo's attempt at "full" virtualization of guest
MTRRs:
commit 606decd670
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Oct 1 13:12:47 2015 +0200
Revert "KVM: x86: apply guest MTRR virtualization on host reserved pages"
This reverts commit fd717f1101.
It was reported to cause Machine Check Exceptions (bug 104091).
...
commit fd717f1101
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jul 7 14:38:13 2015 +0200
KVM: x86: apply guest MTRR virtualization on host reserved pages
Currently guest MTRR is avoided if kvm_is_reserved_pfn returns true.
However, the guest could prefer a different page type than UC for
such pages. A good example is that pass-throughed VGA frame buffer is
not always UC as host expected.
This patch enables full use of virtual guest MTRRs.
I.e. Paolo tried to add back KVM's behavior before "Map device MMIO as UC
in EPT" and got the same result: machine checks, likely due to the guest
MTRRs not being trustworthy/sane at all times.
Note, Paolo also tried to enable MTRR virtualization on SVM+NPT, but that
too got reverted. Unfortunately, it doesn't appear that anyone ever found
a smoking gun, i.e. exactly why emulating guest MTRRs via NPT PAT caused
extremely slow boot times doesn't appear to have a definitive root cause.
commit fc07e76ac7
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Oct 1 13:20:22 2015 +0200
Revert "KVM: SVM: use NPT page attributes"
This reverts commit 3c2e7f7de3.
Initializing the mapping from MTRR to PAT values was reported to
fail nondeterministically, and it also caused extremely slow boot
(due to caching getting disabled---bug 103321) with assigned devices.
...
commit 3c2e7f7de3
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jul 7 14:32:17 2015 +0200
KVM: SVM: use NPT page attributes
Right now, NPT page attributes are not used, and the final page
attribute depends solely on gPAT (which however is not synced
correctly), the guest MTRRs and the guest page attributes.
However, we can do better by mimicking what is done for VMX.
In the absence of PCI passthrough, the guest PAT can be ignored
and the page attributes can be just WB. If passthrough is being
used, instead, keep respecting the guest PAT, and emulate the guest
MTRRs through the PAT field of the nested page tables.
The only snag is that WP memory cannot be emulated correctly,
because Linux's default PAT setting only includes the other types.
In short, honoring guest MTRRs for VMX was initially a workaround of
sorts for KVM ignoring guest PAT *and* for KVM not forcing UC for host
MMIO. And while there *are* known cases where honoring guest MTRRs is
desirable, e.g. passthrough VGA frame buffers, the desired behavior in
that case is to get WC instead of UC, i.e. at this point it's for
performance, not correctness.
Furthermore, the complete absence of MTRR virtualization on NPT and
shadow paging proves that, while KVM theoretically can do better, it's
by no means necessary for correctnesss.
Lastly, since kernels mostly rely on firmware to do MTRR setup, and the
host typically provides guest firmware, honoring guest MTRRs is effectively
honoring *host* userspace memtypes, which is also backwards. I.e. it
would be far better for host userspace to communicate its desired memtype
directly to KVM (or perhaps indirectly via VMAs in the host kernel), not
through guest MTRRs.
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240309010929.1403984-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Keep kvm_apicv_inhibit enum naming consistent with the current pattern by
renaming the reason/enumerator defined as APICV_INHIBIT_REASON_DISABLE to
APICV_INHIBIT_REASON_DISABLED.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-3-alejandro.j.jimenez@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the tracing infrastructure helper __print_flags() for printing flag
bitfields, to enhance the trace output by displaying a string describing
each of the inhibit reasons set.
The kvm_apicv_inhibit_changed tracepoint currently shows the raw bitmap
value, requiring the user to consult the source file where the inhibit
reasons are defined to decode the trace output.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240506225321.3440701-2-alejandro.j.jimenez@oracle.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC
bus clock frequency for APIC timer emulation.
Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the
frequency in nanoseconds. When using this capability, the user space
VMM should configure CPUID leaf 0x15 to advertise the frequency.
Vishal reported that the TDX guest kernel expects a 25MHz APIC bus
frequency but ends up getting interrupts at a significantly higher rate.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user
space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is
enumerated, the guest kernel uses it as the APIC bus frequency. If not,
the guest kernel measures the frequency based on other known timers like
the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest
kernel expects a 25MHz timer frequency but gets timer interrupt more
frequently due to the 1GHz frequency used by KVM.
To ensure that the guest doesn't have a conflicting view of the APIC bus
frequency, allow the userspace to tell KVM to use the same frequency that
TDX mandates instead of the default 1Ghz.
Reported-by: Vishal Annapurve <vannapurve@google.com>
Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.com
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce the VM variable "nanoseconds per APIC bus cycle" in
preparation to make the APIC bus frequency configurable.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
Introduce the VM variable "nanoseconds per APIC bus cycle" to prepare
for allowing userspace to tell KVM to use the frequency that TDX mandates
instead of the default 1Ghz. Doing so ensures that the guest doesn't have
a conflicting view of the APIC bus frequency.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
[reinette: rework changelog]
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/ae75ce37c6c38bb4efd10a0a41932984c40b24ac.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull base x86 KVM support for running SEV-SNP guests from Michael Roth:
* add some basic infrastructure and introduces a new KVM_X86_SNP_VM
vm_type to handle differences versus the existing KVM_X86_SEV_VM and
KVM_X86_SEV_ES_VM types.
* implement the KVM API to handle the creation of a cryptographic
launch context, encrypt/measure the initial image into guest memory,
and finalize it before launching it.
* implement handling for various guest-generated events such as page
state changes, onlining of additional vCPUs, etc.
* implement the gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges as well as
cleaning them up prior to returning them to the host for use as
normal memory. Because those cleanup hooks supplant certain
activities like issuing WBINVDs during KVM MMU invalidations, avoid
duplicating that work to avoid unecessary overhead.
This merge leaves out support support for attestation guest requests
and for loading the signing keys to be used for attestation requests.
Remove support for specifying a static local APIC timer advancement value,
and instead present a read-only boolean parameter to let userspace enable
or disable KVM's dynamic APIC timer advancement. Realistically, it's all
but impossible for userspace to specify an advancement that is more
precise than what KVM's adaptive tuning can provide. E.g. a static value
needs to be tuned for the exact hardware and kernel, and if KVM is using
hrtimers, likely requires additional tuning for the exact configuration of
the entire system.
Dropping support for a userspace provided value also fixes several flaws
in the interface. E.g. KVM interprets a negative value other than -1 as a
large advancement, toggling between a negative and positive value yields
unpredictable behavior as vCPUs will switch from dynamic to static
advancement, changing the advancement in the middle of VM creation can
result in different values for vCPUs within a VM, etc. Those flaws are
mostly fixable, but there's almost no justification for taking on yet more
complexity (it's minimal complexity, but still non-zero).
The only arguments against using KVM's adaptive tuning is if a setup needs
a higher maximum, or if the adjustments are too reactive, but those are
arguments for letting userspace control the absolute max advancement and
the granularity of each adjustment, e.g. similar to how KVM provides knobs
for halt polling.
Link: https://lore.kernel.org/all/20240520115334.852510-1-zhoushuling@huawei.com
Cc: Shuling Zhou <zhoushuling@huawei.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522010304.1650603-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This MSR reads as 0, and any host-initiated writes are ignored, so
there's no reason to enumerate it in KVM_GET_MSR_INDEX_LIST.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20231113184854.2344416-1-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add "struct kvm_host_values kvm_host" to hold the various host values
that KVM snapshots during initialization. Bundling the host values into
a single struct simplifies adding new MSRs and other features with host
state/values that KVM cares about, and provides a one-stop shop. E.g.
adding a new value requires one line, whereas tracking each value
individual often requires three: declaration, definition, and export.
No functional change intended.
Link: https://lore.kernel.org/r/20240423221521.2923759-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This will handle the RMP table updates needed to put a page into a
private state before mapping it into an SEV-SNP guest.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-14-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SEV-SNP AP Creation NAE event. This allows SEV-SNP
guests to alter the register state of the APs on their own. This allows
the guest a way of simulating INIT-SIPI.
A new event, KVM_REQ_UPDATE_PROTECTED_GUEST_STATE, is created and used
so as to avoid updating the VMSA pointer while the vCPU is running.
For CREATE
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID. The GPA is saved in the svm struct of the
target vCPU, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is added
to the vCPU and then the vCPU is kicked.
For CREATE_ON_INIT:
The guest supplies the GPA of the VMSA to be used for the vCPU with
the specified APIC ID the next time an INIT is performed. The GPA is
saved in the svm struct of the target vCPU.
For DESTROY:
The guest indicates it wishes to stop the vCPU. The GPA is cleared
from the svm struct, the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event is
added to vCPU and then the vCPU is kicked.
The KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event handler will be invoked
as a result of the event or as a result of an INIT. If a new VMSA is to
be installed, the VMSA guest page is set as the VMSA in the vCPU VMCB
and the vCPU state is set to KVM_MP_STATE_RUNNABLE. If a new VMSA is not
to be installed, the VMSA is cleared in the vCPU VMCB and the vCPU state
is set to KVM_MP_STATE_HALTED to prevent it from being run.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-13-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SEV-SNP is enabled in the guest, the hardware places restrictions
on all memory accesses based on the contents of the RMP table. When
hardware encounters RMP check failure caused by the guest memory access
it raises the #NPF. The error code contains additional information on
the access type. See the APM volume 2 for additional information.
When using gmem, RMP faults resulting from mismatches between the state
in the RMP table vs. what the guest expects via its page table result
in KVM_EXIT_MEMORY_FAULTs being forwarded to userspace to handle. This
means the only expected case that needs to be handled in the kernel is
when the page size of the entry in the RMP table is larger than the
mapping in the nested page table, in which case a PSMASH instruction
needs to be issued to split the large RMP entry into individual 4K
entries so that subsequent accesses can succeed.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-12-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
-----BEGIN PGP SIGNATURE-----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=9RXP
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.10:
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field, which
is unused by hardware, so that KVM can communicate its inability to map GPAs
that set bits 51:48 due to lack of 5-level paging. Guest firmware is
expected to use the information to safely remap BARs in the uppermost GPA
space, i.e to avoid placing a BAR at a legal, but unmappable, GPA.
- Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
- Don't completely ignore same-value writes to immutable feature MSRs, as
doing so results in KVM failing to reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- Don't mark APICv as being inhibited due to ABSENT if APICv is disabled
KVM-wide to avoid confusing debuggers (KVM will never bother clearing the
ABSENT inhibit, even if userspace enables in-kernel local APIC).
In some cases, like with SEV-SNP, guest memory needs to be updated in a
platform-specific manner before it can be safely freed back to the host.
Wire up arch-defined hooks to the .free_folio kvm_gmem_aops callback to
allow for special handling of this sort when freeing memory in response
to FALLOC_FL_PUNCH_HOLE operations and when releasing the inode, and go
ahead and define an arch-specific hook for x86 since it will be needed
for handling memory used for SEV-SNP guests.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
guest_memfd pages are generally expected to be in some arch-defined
initial state prior to using them for guest memory. For SEV-SNP this
initial state is 'private', or 'guest-owned', and requires additional
operations to move these pages into a 'private' state by updating the
corresponding entries the RMP table.
Allow for an arch-defined hook to handle updates of this sort, and go
ahead and implement one for x86 so KVM implementations like AMD SVM can
register a kvm_x86_ops callback to handle these updates for SEV-SNP
guests.
The preparation callback is always called when allocating/grabbing
folios via gmem, and it is up to the architecture to keep track of
whether or not the pages are already in the expected state (e.g. the RMP
table in the case of SEV-SNP).
In some cases, it is necessary to defer the preparation of the pages to
handle things like in-place encryption of initial guest memory payloads
before marking these pages as 'private'/'guest-owned'. Add an argument
(always true for now) to kvm_gmem_get_folio() that allows for the
preparation callback to be bypassed. To detect possible issues in
the way userspace initializes memory, it is only possible to add an
unprepared page if it is not already included in the filemap.
Link: https://lore.kernel.org/lkml/ZLqVdvsF11Ddo7Dq@google.com/
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231230172351.574091-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson
Maxim Levitsky
Kai Huang
Paolo Bonzini
Linus Torvalds
Tom Dohrmann
Li Chen
Isaku Yamahata
Wei Wang
Peng Hao
Dapeng Mi
David Matlack
Mathias Krause
Yi Wang
Thomas Prescher
Yan Zhao
Alejandro Jimenez
Jim Mattson
Michael Roth
Tom Lendacky
Brijesh Singh