mirror of https://github.com/torvalds/linux.git
1646 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Matthew Wilcox (Oracle)
|
6599591816 |
memcg: convert mem_cgroup_swapin_charge_page() to mem_cgroup_swapin_charge_folio()
All callers now have a folio, so pass it in here and remove an unnecessary call to page_folio(). Link: https://lkml.kernel.org/r/20220902194653.1739778-17-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Liam R. Howlett
|
ba0aff8ea6 |
mm/memcontrol: stop using mm->highest_vm_end
Pass through ULONG_MAX instead. Link: https://lkml.kernel.org/r/20220906194824.2110408-56-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Yu Zhao
|
bd74fdaea1 |
mm: multi-gen LRU: support page table walks
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
Yu Zhao
|
018ee47f14 |
mm: multi-gen LRU: exploit locality in rmap
Searching the rmap for PTEs mapping each page on an LRU list (to test and
clear the accessed bit) can be expensive because pages from different VMAs
(PA space) are not cache friendly to the rmap (VA space). For workloads
mostly using mapped pages, searching the rmap can incur the highest CPU
cost in the reclaim path.
This patch exploits spatial locality to reduce the trips into the rmap.
When shrink_page_list() walks the rmap and finds a young PTE, a new
function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent
PTEs. On finding another young PTE, it clears the accessed bit and
updates the gen counter of the page mapped by this PTE to
(max_seq%MAX_NR_GENS)+1.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[3, 5]%
Ops/sec KB/sec
patch1-6: 1106168.46 43025.04
patch1-7: 1147696.57 44640.29
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
Configurations:
no change
Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
Yu Zhao
|
ec1c86b25f |
mm: multi-gen LRU: groundwork
Evictable pages are divided into multiple generations for each lruvec. The youngest generation number is stored in lrugen->max_seq for both anon and file types as they are aged on an equal footing. The oldest generation numbers are stored in lrugen->min_seq[] separately for anon and file types as clean file pages can be evicted regardless of swap constraints. These three variables are monotonically increasing. Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits in order to fit into the gen counter in folio->flags. Each truncated generation number is an index to lrugen->lists[]. The sliding window technique is used to track at least MIN_NR_GENS and at most MAX_NR_GENS generations. The gen counter stores a value within [1, MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it stores 0. There are two conceptually independent procedures: "the aging", which produces young generations, and "the eviction", which consumes old generations. They form a closed-loop system, i.e., "the page reclaim". Both procedures can be invoked from userspace for the purposes of working set estimation and proactive reclaim. These techniques are commonly used to optimize job scheduling (bin packing) in data centers [1][2]. To avoid confusion, the terms "hot" and "cold" will be applied to the multi-gen LRU, as a new convention; the terms "active" and "inactive" will be applied to the active/inactive LRU, as usual. The protection of hot pages and the selection of cold pages are based on page access channels and patterns. There are two access channels: one through page tables and the other through file descriptors. The protection of the former channel is by design stronger because: 1. The uncertainty in determining the access patterns of the former channel is higher due to the approximation of the accessed bit. 2. The cost of evicting the former channel is higher due to the TLB flushes required and the likelihood of encountering the dirty bit. 3. The penalty of underprotecting the former channel is higher because applications usually do not prepare themselves for major page faults like they do for blocked I/O. E.g., GUI applications commonly use dedicated I/O threads to avoid blocking rendering threads. There are also two access patterns: one with temporal locality and the other without. For the reasons listed above, the former channel is assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is present; the latter channel is assumed to follow the latter pattern unless outlying refaults have been observed [3][4]. The next patch will address the "outlying refaults". Three macros, i.e., LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in this patch to make the entire patchset less diffy. A page is added to the youngest generation on faulting. The aging needs to check the accessed bit at least twice before handing this page over to the eviction. The first check takes care of the accessed bit set on the initial fault; the second check makes sure this page has not been used since then. This protocol, AKA second chance, requires a minimum of two generations, hence MIN_NR_GENS. [1] https://dl.acm.org/doi/10.1145/3297858.3304053 [2] https://dl.acm.org/doi/10.1145/3503222.3507731 [3] https://lwn.net/Articles/495543/ [4] https://lwn.net/Articles/815342/ Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Thomas Gleixner
|
e575d40158 |
mm/memcontrol: Replace the PREEMPT_RT conditionals
Use VM_WARN_ON_IRQS_ENABLED() and preempt_disable/enable_nested() to replace the CONFIG_PREEMPT_RT #ifdeffery. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lore.kernel.org/r/20220825164131.402717-6-bigeasy@linutronix.de |
|
Yang Shi
|
e09b0b61fb |
mm: memcg: export workingset refault stats for cgroup v1
Workingset refault stats are important and useful metrics to measure how well reclaimer and swapping work and how healthy the services are, but they are just available for cgroup v2. There are still plenty users with cgroup v1, export the stats for cgroup v1. Link: https://lkml.kernel.org/r/20220816185801.651091-1-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
xupanda
|
b8dd3ee9ca |
mm: memcontrol: fix a typo in comment
Fix a spelling mistake in comment. Link: https://lkml.kernel.org/r/20220815065102.74347-1-xu.panda@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: xupanda <xu.panda@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Tejun Heo
|
c0f2df49cf |
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
|
|
Michal Koutný
|
fa7e439cf9 |
cgroup: Homogenize cgroup_get_from_id() return value
Cgroup id is user provided datum hence extend its return domain to include possible error reason (similar to cgroup_get_from_fd()). This change also fixes commit |
|
Yosry Ahmed
|
ebc97a52b5 |
mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.
We keep track of several kernel memory stats (total kernel memory, page
tables, stack, vmalloc, etc) on multiple levels (global, per-node,
per-memcg, etc). These stats give insights to users to how much memory
is used by the kernel and for what purposes.
Currently, memory used by KVM mmu is not accounted in any of those
kernel memory stats. This patch series accounts the memory pages
used by KVM for page tables in those stats in a new
NR_SECONDARY_PAGETABLE stat. This stat can be later extended to account
for other types of secondary pages tables (e.g. iommu page tables).
KVM has a decent number of large allocations that aren't for page
tables, but for most of them, the number/size of those allocations
scales linearly with either the number of vCPUs or the amount of memory
assigned to the VM. KVM's secondary page table allocations do not scale
linearly, especially when nested virtualization is in use.
From a KVM perspective, NR_SECONDARY_PAGETABLE will scale with KVM's
per-VM pages_{4k,2m,1g} stats unless the guest is doing something
bizarre (e.g. accessing only 4kb chunks of 2mb pages so that KVM is
forced to allocate a large number of page tables even though the guest
isn't accessing that much memory). However, someone would need to either
understand how KVM works to make that connection, or know (or be told) to
go look at KVM's stats if they're running VMs to better decipher the stats.
Furthermore, having NR_PAGETABLE side-by-side with NR_SECONDARY_PAGETABLE
is informative. For example, when backing a VM with THP vs. HugeTLB,
NR_SECONDARY_PAGETABLE is roughly the same, but NR_PAGETABLE is an order
of magnitude higher with THP. So having this stat will at the very least
prove to be useful for understanding tradeoffs between VM backing types,
and likely even steer folks towards potential optimizations.
The original discussion with more details about the rationale:
https://lore.kernel.org/all/87ilqoi77b.wl-maz@kernel.org
This stat will be used by subsequent patches to count KVM mmu
memory usage.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220823004639.2387269-2-yosryahmed@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Tetsuo Handa
|
68aaee147e |
mm: memcontrol: fix potential oom_lock recursion deadlock
syzbot is reporting GFP_KERNEL allocation with oom_lock held when
reporting memcg OOM [1]. If this allocation triggers the global OOM
situation then the system can livelock because the GFP_KERNEL
allocation with oom_lock held cannot trigger the global OOM killer
because __alloc_pages_may_oom() fails to hold oom_lock.
Fix this problem by removing the allocation from memory_stat_format()
completely, and pass static buffer when calling from memcg OOM path.
Note that the caller holding filesystem lock was the trigger for syzbot
to report this locking dependency. Doing GFP_KERNEL allocation with
filesystem lock held can deadlock the system even without involving OOM
situation.
Link: https://syzkaller.appspot.com/bug?extid=2d2aeadc6ce1e1f11d45 [1]
Link: https://lkml.kernel.org/r/86afb39f-8c65-bec2-6cfc-c5e3cd600c0b@I-love.SAKURA.ne.jp
Fixes:
|
|
Jiebin Sun
|
873f64b791 |
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
Remove the redundant updating of stats_flush_threshold. If the global var stats_flush_threshold has exceeded the trigger value for __mem_cgroup_flush_stats, further increment is unnecessary. Apply the patch and test the pts/hackbench-1.0.0 Count:4 (160 threads). Score gain: 1.95x Reduce CPU cycles in __mod_memcg_lruvec_state (44.88% -> 0.12%) CPU: ICX 8380 x 2 sockets Core number: 40 x 2 physical cores Benchmark: pts/hackbench-1.0.0 Count:4 (160 threads) Link: https://lkml.kernel.org/r/20220722164949.47760-1-jiebin.sun@intel.com Signed-off-by: Jiebin Sun <jiebin.sun@intel.com> Acked-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Amadeusz Sawiski <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Yosry Ahmed
|
73b73bac90 |
mm: vmpressure: don't count proactive reclaim in vmpressure
memory.reclaim is a cgroup v2 interface that allows users to proactively reclaim memory from a memcg, without real memory pressure. Reclaim operations invoke vmpressure, which is used: (a) To notify userspace of reclaim efficiency in cgroup v1, and (b) As a signal for a memcg being under memory pressure for networking (see mem_cgroup_under_socket_pressure()). For (a), vmpressure notifications in v1 are not affected by this change since memory.reclaim is a v2 feature. For (b), the effects of the vmpressure signal (according to Shakeel [1]) are as follows: 1. Reducing send and receive buffers of the current socket. 2. May drop packets on the rx path. 3. May throttle current thread on the tx path. Since proactive reclaim is invoked directly by userspace, not by memory pressure, it makes sense not to throttle networking. Hence, this change makes sure that proactive reclaim caused by memory.reclaim does not trigger vmpressure. [1] https://lore.kernel.org/lkml/CALvZod68WdrXEmBpOkadhB5GPYmCXaDZzXH=yyGOCAjFRn4NDQ@mail.gmail.com/ [yosryahmed@google.com: update documentation] Link: https://lkml.kernel.org/r/20220721173015.2643248-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220714064918.2576464-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Roman Gushchin
|
d6e103a757 |
mm: memcontrol: do not miss MEMCG_MAX events for enforced allocations
Yafang Shao reported an issue related to the accounting of bpf memory: if a bpf map is charged indirectly for memory consumed from an interrupt context and allocations are enforced, MEMCG_MAX events are not raised. It's not/less of an issue in a generic case because consequent allocations from a process context will trigger the direct reclaim and MEMCG_MAX events will be raised. However a bpf map can belong to a dying/abandoned memory cgroup, so there will be no allocations from a process context and no MEMCG_MAX events will be triggered. Link: https://lkml.kernel.org/r/20220702033521.64630-1-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reported-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Xiang Yang
|
9c94bef9c9 |
mm/memcontrol.c: replace cgroup_memory_nokmem with mem_cgroup_kmem_disabled()
mem_cgroup_kmem_disabled() checks whether the kmem accounting is off. Therefore, replace cgroup_memory_nokmem with mem_cgroup_kmem_disabled(), which is the same work in percpu.c and slab_common.c. Link: https://lkml.kernel.org/r/20220625061844.226764-1-xiangyang3@huawei.com Signed-off-by: Xiang Yang <xiangyang3@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Alex Sierra
|
f25cbb7a95 |
mm: add zone device coherent type memory support
Device memory that is cache coherent from device and CPU point of view. This is used on platforms that have an advanced system bus (like CAPI or CXL). Any page of a process can be migrated to such memory. However, no one should be allowed to pin such memory so that it can always be evicted. [hch@lst.de: rebased ontop of the refcount changes, remove is_dev_private_or_coherent_page] Link: https://lkml.kernel.org/r/20220715150521.18165-4-alex.sierra@amd.com Signed-off-by: Alex Sierra <alex.sierra@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Roman Gushchin
|
c15187a4a2 |
mm: memcontrol: introduce mem_cgroup_ino() and mem_cgroup_get_from_ino()
Patch series "mm: introduce shrinker debugfs interface", v5. The only existing debugging mechanism is a couple of tracepoints in do_shrink_slab(): mm_shrink_slab_start and mm_shrink_slab_end. They aren't covering everything though: shrinkers which report 0 objects will never show up, there is no support for memcg-aware shrinkers. Shrinkers are identified by their scan function, which is not always enough (e.g. hard to guess which super block's shrinker it is having only "super_cache_scan"). To provide a better visibility and debug options for memory shrinkers this patchset introduces a /sys/kernel/debug/shrinker interface, to some extent similar to /sys/kernel/slab. For each shrinker registered in the system a directory is created. As now, the directory will contain only a "scan" file, which allows to get the number of managed objects for each memory cgroup (for memcg-aware shrinkers) and each numa node (for numa-aware shrinkers on a numa machine). Other interfaces might be added in the future. To make debugging more pleasant, the patchset also names all shrinkers, so that debugfs entries can have meaningful names. This patch (of 5): Shrinker debugfs requires a way to represent memory cgroups without using full paths, both for displaying information and getting input from a user. Cgroup inode number is a perfect way, already used by bpf. This commit adds a couple of helper functions which will be used to handle memcg-aware shrinkers. Link: https://lkml.kernel.org/r/20220601032227.4076670-1-roman.gushchin@linux.dev Link: https://lkml.kernel.org/r/20220601032227.4076670-2-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
akpm
|
46a3b11253 | Merge branch 'master' into mm-stable | |
|
Roman Gushchin
|
fc4db90fe7 |
mm: kmem: make mem_cgroup_from_obj() vmalloc()-safe
Currently mem_cgroup_from_obj() is not working properly with objects allocated using vmalloc(). It creates problems in some cases, when it's called for static objects belonging to modules or generally allocated using vmalloc(). This patch makes mem_cgroup_from_obj() safe to be called on objects allocated using vmalloc(). It also introduces mem_cgroup_from_slab_obj(), which is a faster version to use in places when we know the object is either a slab object or a generic slab page (e.g. when adding an object to a lru list). Link: https://lkml.kernel.org/r/20220610180310.1725111-1-roman.gushchin@linux.dev Suggested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Acked-by: Shakeel Butt <shakeelb@google.com> Tested-by: Vasily Averin <vvs@openvz.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Qian Cai <quic_qiancai@quicinc.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Qi Zheng
|
673520f8da |
mm: memcontrol: add {pgscan,pgsteal}_{kswapd,direct} items in memory.stat of cgroup v2
There are already statistics of {pgscan,pgsteal}_kswapd and
{pgscan,pgsteal}_direct of memcg event here, but now only the sum of the
two is displayed in memory.stat of cgroup v2.
In order to obtain more accurate information during monitoring and
debugging, and to align with the display in /proc/vmstat, it better to
display {pgscan,pgsteal}_kswapd and {pgscan,pgsteal}_direct separately.
Also, for forward compatibility, we still display pgscan and pgsteal items
so that it won't break existing applications.
[zhengqi.arch@bytedance.com: add comment for memcg_vm_event_stat (suggested by Michal)]
Link: https://lkml.kernel.org/r/20220606154028.55030-1-zhengqi.arch@bytedance.com
[zhengqi.arch@bytedance.com: fix the doc, thanks to Johannes]
Link: https://lkml.kernel.org/r/20220607064803.79363-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20220604082209.55174-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Yang Yang
|
df4ae285a3 |
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
There is no slabinfo.py in tools/cgroup, but has memcg_slabinfo.py instead. Link: https://lkml.kernel.org/r/20220610024451.744135-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Johannes Weiner
|
f4840ccfca |
zswap: memcg accounting
Applications can currently escape their cgroup memory containment when zswap is enabled. This patch adds per-cgroup tracking and limiting of zswap backend memory to rectify this. The existing cgroup2 memory.stat file is extended to show zswap statistics analogous to what's in meminfo and vmstat. Furthermore, two new control files, memory.zswap.current and memory.zswap.max, are added to allow tuning zswap usage on a per-workload basis. This is important since not all workloads benefit from zswap equally; some even suffer compared to disk swap when memory contents don't compress well. The optimal size of the zswap pool, and the threshold for writeback, also depends on the size of the workload's warm set. The implementation doesn't use a traditional page_counter transaction. zswap is unconventional as a memory consumer in that we only know the amount of memory to charge once expensive compression has occurred. If zwap is disabled or the limit is already exceeded we obviously don't want to compress page upon page only to reject them all. Instead, the limit is checked against current usage, then we compress and charge. This allows some limit overrun, but not enough to matter in practice. [hannes@cmpxchg.org: fix for CONFIG_SLOB builds] Link: https://lkml.kernel.org/r/YnwD14zxYjUJPc2w@cmpxchg.org [hannes@cmpxchg.org: opt out of cgroups v1] Link: https://lkml.kernel.org/r/Yn6it9mBYFA+/lTb@cmpxchg.org Link: https://lkml.kernel.org/r/20220510152847.230957-7-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Ganesan Rajagopal
|
8e20d4b332 |
mm/memcontrol: export memcg->watermark via sysfs for v2 memcg
We run a lot of automated tests when building our software and run into OOM scenarios when the tests run unbounded. v1 memcg exports memcg->watermark as "memory.max_usage_in_bytes" in sysfs. We use this metric to heuristically limit the number of tests that can run in parallel based on per test historical data. This metric is currently not exported for v2 memcg and there is no other easy way of getting this information. getrusage() syscall returns "ru_maxrss" which can be used as an approximation but that's the max RSS of a single child process across all children instead of the aggregated max for all child processes. The only work around is to periodically poll "memory.current" but that's not practical for short-lived one-off cgroups. Hence, expose memcg->watermark as "memory.peak" for v2 memcg. Link: https://lkml.kernel.org/r/20220507050916.GA13577@us192.sjc.aristanetworks.com Signed-off-by: Ganesan Rajagopal <rganesan@arista.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Matthew Wilcox (Oracle)
|
e2e3fdc7d4 |
swap: turn get_swap_page() into folio_alloc_swap()
This removes an assumption that a large folio is HPAGE_PMD_NR pages in size. Link: https://lkml.kernel.org/r/20220504182857.4013401-8-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Peter Xu
|
5c041f5d1f |
mm: teach core mm about pte markers
This patch still does not use pte marker in any way, however it teaches the core mm about the pte marker idea. For example, handle_pte_marker() is introduced that will parse and handle all the pte marker faults. Many of the places are more about commenting it up - so that we know there's the possibility of pte marker showing up, and why we don't need special code for the cases. [peterx@redhat.com: userfaultfd.c needs swapops.h] Link: https://lkml.kernel.org/r/YmRlVj3cdizYJsr0@xz-m1.local Link: https://lkml.kernel.org/r/20220405014833.14015-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
NeilBrown
|
014bb1de4f |
mm: create new mm/swap.h header file
Patch series "MM changes to improve swap-over-NFS support". Assorted improvements for swap-via-filesystem. This is a resend of these patches, rebased on current HEAD. The only substantial changes is that swap_dirty_folio has replaced swap_set_page_dirty. Currently swap-via-fs (SWP_FS_OPS) doesn't work for any filesystem. It has previously worked for NFS but that broke a few releases back. This series changes to use a new ->swap_rw rather than ->readpage and ->direct_IO. It also makes other improvements. There is a companion series already in linux-next which fixes various issues with NFS. Once both series land, a final patch is needed which changes NFS over to use ->swap_rw. This patch (of 10): Many functions declared in include/linux/swap.h are only used within mm/ Create a new "mm/swap.h" and move some of these declarations there. Remove the redundant 'extern' from the function declarations. [akpm@linux-foundation.org: mm/memory-failure.c needs mm/swap.h] Link: https://lkml.kernel.org/r/164859751830.29473.5309689752169286816.stgit@noble.brown Link: https://lkml.kernel.org/r/164859778120.29473.11725907882296224053.stgit@noble.brown Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Shakeel Butt
|
94968384dd |
memcg: introduce per-memcg reclaim interface
This patch series adds a memory.reclaim proactive reclaim interface. The rationale behind the interface and how it works are in the first patch. This patch (of 4): Introduce a memcg interface to trigger memory reclaim on a memory cgroup. Use case: Proactive Reclaim --------------------------- A userspace proactive reclaimer can continuously probe the memcg to reclaim a small amount of memory. This gives more accurate and up-to-date workingset estimation as the LRUs are continuously sorted and can potentially provide more deterministic memory overcommit behavior. The memory overcommit controller can provide more proactive response to the changing behavior of the running applications instead of being reactive. A userspace reclaimer's purpose in this case is not a complete replacement for kswapd or direct reclaim, it is to proactively identify memory savings opportunities and reclaim some amount of cold pages set by the policy to free up the memory for more demanding jobs or scheduling new jobs. A user space proactive reclaimer is used in Google data centers. Additionally, Meta's TMO paper recently referenced a very similar interface used for user space proactive reclaim: https://dl.acm.org/doi/pdf/10.1145/3503222.3507731 Benefits of a user space reclaimer: ----------------------------------- 1) More flexible on who should be charged for the cpu of the memory reclaim. For proactive reclaim, it makes more sense to be centralized. 2) More flexible on dedicating the resources (like cpu). The memory overcommit controller can balance the cost between the cpu usage and the memory reclaimed. 3) Provides a way to the applications to keep their LRUs sorted, so, under memory pressure better reclaim candidates are selected. This also gives more accurate and uptodate notion of working set for an application. Why memory.high is not enough? ------------------------------ - memory.high can be used to trigger reclaim in a memcg and can potentially be used for proactive reclaim. However there is a big downside in using memory.high. It can potentially introduce high reclaim stalls in the target application as the allocations from the processes or the threads of the application can hit the temporary memory.high limit. - Userspace proactive reclaimers usually use feedback loops to decide how much memory to proactively reclaim from a workload. The metrics used for this are usually either refaults or PSI, and these metrics will become messy if the application gets throttled by hitting the high limit. - memory.high is a stateful interface, if the userspace proactive reclaimer crashes for any reason while triggering reclaim it can leave the application in a bad state. - If a workload is rapidly expanding, setting memory.high to proactively reclaim memory can result in actually reclaiming more memory than intended. The benefits of such interface and shortcomings of existing interface were further discussed in this RFC thread: https://lore.kernel.org/linux-mm/5df21376-7dd1-bf81-8414-32a73cea45dd@google.com/ Interface: ---------- Introducing a very simple memcg interface 'echo 10M > memory.reclaim' to trigger reclaim in the target memory cgroup. The interface is introduced as a nested-keyed file to allow for future optional arguments to be easily added to configure the behavior of reclaim. Possible Extensions: -------------------- - This interface can be extended with an additional parameter or flags to allow specifying one or more types of memory to reclaim from (e.g. file, anon, ..). - The interface can also be extended with a node mask to reclaim from specific nodes. This has use cases for reclaim-based demotion in memory tiering systens. - A similar per-node interface can also be added to support proactive reclaim and reclaim-based demotion in systems without memcg. - Add a timeout parameter to make it easier for user space to call the interface without worrying about being blocked for an undefined amount of time. For now, let's keep things simple by adding the basic functionality. [yosryahmed@google.com: worked on versions v2 onwards, refreshed to current master, updated commit message based on recent discussions and use cases] Link: https://lkml.kernel.org/r/20220425190040.2475377-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220425190040.2475377-2-yosryahmed@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Co-developed-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Wei Xu <weixugc@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Chen Wandun <chenwandun@huawei.com> Cc: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Lu Jialin
|
9707aff701 |
mm/memcontrol.c: remove unused private flag of memory.oom_control
There is no use for the private value, __OOM_TYPE and OOM notifier OOM_CONTROL. Therefore remove them to make the code clean. Link: https://lkml.kernel.org/r/20220421122755.40899-1-lujialin4@huawei.com Signed-off-by: Lu Jialin <lujialin4@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Lu Jialin
|
ef7a4ffc4c |
mm/memcontrol.c: make cgroup_memory_noswap static
cgroup_memory_noswap is only used in mm/memcontrol.c, therefore just make it static, and remove export in include/linux/memcontrol.h Link: https://lkml.kernel.org/r/20220421124736.62180-1-lujialin4@huawei.com Signed-off-by: Lu Jialin <lujialin4@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Wei Yang
|
c449d55992 |
mm/memcg: non-hierarchical mode is deprecated
After commit
|
|
|
Wei Yang
|
a9320aae68 |
mm/memcg: move generation assignment and comparison together
For each round-trip, we assign generation on first invocation and compare it on subsequent invocations. Let's move them together to make it more self-explaining. Also this reduce a check on prev. [hannes@cmpxchg.org: better comment to explain reclaim model] Link: https://lkml.kernel.org/r/20220330234719.18340-4-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Wei Yang
|
89d8330ccf |
mm/memcg: set pos explicitly for reclaim and !reclaim
During mem_cgroup_iter, there are two ways to get iteration position: reclaim vs non-reclaim mode. Let's do it explicitly for reclaim vs non-reclaim mode. Link: https://lkml.kernel.org/r/20220330234719.18340-3-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Wei Yang
|
41555dadbf |
mm/memcg: set memcg after css verified and got reference
Patch series "mm/memcg: some cleanup for mem_cgroup_iter()", v2. No functional change, try to make it more readable. This patch (of 3): Instead of resetting memcg when css is either not verified or not got reference, we can set it after these process. No functional change, just simplified the code a little. Link: https://lkml.kernel.org/r/20220330234719.18340-1-richard.weiyang@gmail.com Link: https://lkml.kernel.org/r/20220330234719.18340-2-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Michal Hocko <mhocko@suse.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Wei Yang
|
391e0efc15 |
mm/memcg: mz already removed from rb_tree if not NULL
When mz is not NULL, it means mz can either come from mem_cgroup_largest_soft_limit_node or __mem_cgroup_largest_soft_limit_node. And both of them have removed this node by __mem_cgroup_remove_exceeded(). Not necessary to call __mem_cgroup_remove_exceeded() again. [mhocko@suse.com: refine changelog] Link: https://lkml.kernel.org/r/20220314233030.12334-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Miaohe Lin
|
d8f653386c |
mm/memcg: remove unneeded nr_scanned
The local variable nr_scanned is unneeded as mem_cgroup_soft_reclaim always does *total_scanned += nr_scanned. So we can pass total_scanned directly to the mem_cgroup_soft_reclaim to simplify the code and save some cpu cycles of adding nr_scanned to total_scanned. Link: https://lkml.kernel.org/r/20220328114144.53389-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Shakeel Butt
|
9b3016154c |
memcg: sync flush only if periodic flush is delayed
Daniel Dao has reported [1] a regression on workloads that may trigger a
lot of refaults (anon and file). The underlying issue is that flushing
rstat is expensive. Although rstat flush are batched with (nr_cpus *
MEMCG_BATCH) stat updates, it seems like there are workloads which
genuinely do stat updates larger than batch value within short amount of
time. Since the rstat flush can happen in the performance critical
codepaths like page faults, such workload can suffer greatly.
This patch fixes this regression by making the rstat flushing
conditional in the performance critical codepaths. More specifically,
the kernel relies on the async periodic rstat flusher to flush the stats
and only if the periodic flusher is delayed by more than twice the
amount of its normal time window then the kernel allows rstat flushing
from the performance critical codepaths.
Now the question: what are the side-effects of this change? The worst
that can happen is the refault codepath will see 4sec old lruvec stats
and may cause false (or missed) activations of the refaulted page which
may under-or-overestimate the workingset size. Though that is not very
concerning as the kernel can already miss or do false activations.
There are two more codepaths whose flushing behavior is not changed by
this patch and we may need to come to them in future. One is the
writeback stats used by dirty throttling and second is the deactivation
heuristic in the reclaim. For now keeping an eye on them and if there
is report of regression due to these codepaths, we will reevaluate then.
Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com
Fixes:
|
|
Linus Torvalds
|
1930a6e739 |
ptrace: Cleanups for v5.18
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
|
Linus Torvalds
|
9030fb0bb9 |
Folio changes for 5.18
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
|
Wei Yang
|
8c9bb39816 |
memcg: do not tweak node in alloc_mem_cgroup_per_node_info
alloc_mem_cgroup_per_node_info is allocated for each possible node and this used to be a problem because !node_online nodes didn't have appropriate data structure allocated. This has changed by "mm: handle uninitialized numa nodes gracefully" so we can drop the special casing here. Link: https://lkml.kernel.org/r/20220127085305.20890-7-mhocko@kernel.org Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Alexey Makhalov <amakhalov@vmware.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nico Pache <npache@redhat.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Rafael Aquini <raquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Muchun Song
|
be740503ed |
mm: memcontrol: fix cannot alloc the maximum memcg ID
The idr_alloc() does not include @max ID. So in the current implementation, the maximum memcg ID is 65534 instead of 65535. It seems a bug. So fix this. Link: https://lkml.kernel.org/r/20220228122126.37293-15-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
f9c69d6346 |
mm: memcontrol: reuse memory cgroup ID for kmem ID
There are two idrs being used by memory cgroup, one is for kmem ID, another is for memory cgroup ID. The maximum ID of both is 64Ki. Both of them can limit the total number of memory cgroups. Actually, we can reuse memory cgroup ID for kmem ID to simplify the code. Link: https://lkml.kernel.org/r/20220228122126.37293-14-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
bbca91cca9 |
mm: list_lru: replace linear array with xarray
If we run 10k containers in the system, the size of the list_lru_memcg->lrus can be ~96KB per list_lru. When we decrease the number containers, the size of the array will not be shrinked. It is not scalable. The xarray is a good choice for this case. We can save a lot of memory when there are tens of thousands continers in the system. If we use xarray, we also can remove the logic code of resizing array, which can simplify the code. [akpm@linux-foundation.org: remove unused local] Link: https://lkml.kernel.org/r/20220228122126.37293-13-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
1f391eb270 |
mm: list_lru: rename memcg_drain_all_list_lrus to memcg_reparent_list_lrus
The purpose of the memcg_drain_all_list_lrus() is list_lrus reparenting. It is very similar to memcg_reparent_objcgs(). Rename it to memcg_reparent_list_lrus() so that the name can more consistent with memcg_reparent_objcgs(). Link: https://lkml.kernel.org/r/20220228122126.37293-12-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
5abc1e37af |
mm: list_lru: allocate list_lru_one only when needed
In our server, we found a suspected memory leak problem. The kmalloc-32 consumes more than 6GB of memory. Other kmem_caches consume less than 2GB memory. After our in-depth analysis, the memory consumption of kmalloc-32 slab cache is the cause of list_lru_one allocation. crash> p memcg_nr_cache_ids memcg_nr_cache_ids = $2 = 24574 memcg_nr_cache_ids is very large and memory consumption of each list_lru can be calculated with the following formula. num_numa_node * memcg_nr_cache_ids * 32 (kmalloc-32) There are 4 numa nodes in our system, so each list_lru consumes ~3MB. crash> list super_blocks | wc -l 952 Every mount will register 2 list lrus, one is for inode, another is for dentry. There are 952 super_blocks. So the total memory is 952 * 2 * 3 MB (~5.6GB). But the number of memory cgroup is less than 500. So I guess more than 12286 containers have been deployed on this machine (I do not know why there are so many containers, it may be a user's bug or the user really want to do that). And memcg_nr_cache_ids has not been reduced to a suitable value. This can waste a lot of memory. Now the infrastructure for dynamic list_lru_one allocation is ready, so remove statically allocated memory code to save memory. Link: https://lkml.kernel.org/r/20220228122126.37293-11-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
da0efe3094 |
mm: memcontrol: move memcg_online_kmem() to mem_cgroup_css_online()
It will simplify the code if moving memcg_online_kmem() to mem_cgroup_css_online() and do not need to set ->kmemcg_id to -1 to indicate the memcg is offline. In the next patch, ->kmemcg_id will be used to sync list lru reparenting which requires not to change ->kmemcg_id. Link: https://lkml.kernel.org/r/20220228122126.37293-10-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
88f2ef73fd |
mm: introduce kmem_cache_alloc_lru
We currently allocate scope for every memcg to be able to tracked on every superblock instantiated in the system, regardless of whether that superblock is even accessible to that memcg. These huge memcg counts come from container hosts where memcgs are confined to just a small subset of the total number of superblocks that instantiated at any given point in time. For these systems with huge container counts, list_lru does not need the capability of tracking every memcg on every superblock. What it comes down to is that adding the memcg to the list_lru at the first insert. So introduce kmem_cache_alloc_lru to allocate objects and its list_lru. In the later patch, we will convert all inode and dentry allocation from kmem_cache_alloc to kmem_cache_alloc_lru. Link: https://lkml.kernel.org/r/20220228122126.37293-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Sebastian Andrzej Siewior
|
0790ed6238 |
mm/memcg: disable migration instead of preemption in drain_all_stock().
Before the for-each-CPU loop, preemption is disabled so that so that drain_local_stock() can be invoked directly instead of scheduling a worker. Ensuring that drain_local_stock() completed on the local CPU is not correctness problem. It _could_ be that the charging path will be forced to reclaim memory because cached charges are still waiting for their draining. Disabling preemption before invoking drain_local_stock() is problematic on PREEMPT_RT due to the sleeping locks involved. To ensure that no CPU migrations happens across for_each_online_cpu() it is enouhg to use migrate_disable() which disables migration and keeps context preemptible to a sleeping lock can be acquired. A race with CPU hotplug is not a problem because pcp data is not going away. In the worst case we just schedule draining of an empty stock. Use migrate_disable() instead of get_cpu() around the for_each_online_cpu() loop. Link: https://lkml.kernel.org/r/20220226204144.1008339-7-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: kernel test robot <oliver.sang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sebastian Andrzej Siewior
|
5675114623 |
mm/memcg: protect memcg_stock with a local_lock_t
The members of the per-CPU structure memcg_stock_pcp are protected by disabling interrupts. This is not working on PREEMPT_RT because it creates atomic context in which actions are performed which require preemptible context. One example is obj_cgroup_release(). The IRQ-disable sections can be replaced with local_lock_t which preserves the explicit disabling of interrupts while keeps the code preemptible on PREEMPT_RT. drain_obj_stock() drops a reference on obj_cgroup which leads to an invocat= ion of obj_cgroup_release() if it is the last object. This in turn leads to recursive locking of the local_lock_t. To avoid this, obj_cgroup_release() = is invoked outside of the locked section. obj_cgroup_uncharge_pages() can be invoked with the local_lock_t acquired a= nd without it. This will lead later to a recursion in refill_stock(). To avoid the locking recursion provide obj_cgroup_uncharge_pages_locked() which uses the locked version of refill_stock(). - Replace disabling interrupts for memcg_stock with a local_lock_t. - Let drain_obj_stock() return the old struct obj_cgroup which is passed to obj_cgroup_put() outside of the locked section. - Provide obj_cgroup_uncharge_pages_locked() which uses the locked version of refill_stock() to avoid recursive locking in drain_obj_stock(). Link: https://lkml.kernel.org/r/20220209014709.GA26885@xsang-OptiPlex-9020 Link: https://lkml.kernel.org/r/20220226204144.1008339-6-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reported-by: kernel test robot <oliver.sang@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
af9a3b69e8 |
mm/memcg: opencode the inner part of obj_cgroup_uncharge_pages() in drain_obj_stock()
Provide the inner part of refill_stock() as __refill_stock() without disabling interrupts. This eases the integration of local_lock_t where recursive locking must be avoided. Open code obj_cgroup_uncharge_pages() in drain_obj_stock() and use __refill_stock(). The caller of drain_obj_stock() already disables interrupts. [bigeasy@linutronix.de: patch body around Johannes' diff] Link: https://lkml.kernel.org/r/20220226204144.1008339-5-bigeasy@linutronix.de Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sebastian Andrzej Siewior
|
be3e67b54b |
mm/memcg: protect per-CPU counter by disabling preemption on PREEMPT_RT where needed.
The per-CPU counter are modified with the non-atomic modifier. The consistency is ensured by disabling interrupts for the update. On non PREEMPT_RT configuration this works because acquiring a spinlock_t typed lock with the _irq() suffix disables interrupts. On PREEMPT_RT configurations the RMW operation can be interrupted. Another problem is that mem_cgroup_swapout() expects to be invoked with disabled interrupts because the caller has to acquire a spinlock_t which is acquired with disabled interrupts. Since spinlock_t never disables interrupts on PREEMPT_RT the interrupts are never disabled at this point. The code is never called from in_irq() context on PREEMPT_RT therefore disabling preemption during the update is sufficient on PREEMPT_RT. The sections which explicitly disable interrupts can remain on PREEMPT_RT because the sections remain short and they don't involve sleeping locks (memcg_check_events() is doing nothing on PREEMPT_RT). Disable preemption during update of the per-CPU variables which do not explicitly disable interrupts. Link: https://lkml.kernel.org/r/20220226204144.1008339-4-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: kernel test robot <oliver.sang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sebastian Andrzej Siewior
|
2343e88d23 |
mm/memcg: disable threshold event handlers on PREEMPT_RT
During the integration of PREEMPT_RT support, the code flow around memcg_check_events() resulted in `twisted code'. Moving the code around and avoiding then would then lead to an additional local-irq-save section within memcg_check_events(). While looking better, it adds a local-irq-save section to code flow which is usually within an local-irq-off block on non-PREEMPT_RT configurations. The threshold event handler is a deprecated memcg v1 feature. Instead of trying to get it to work under PREEMPT_RT just disable it. There should be no users on PREEMPT_RT. From that perspective it makes even less sense to get it to work under PREEMPT_RT while having zero users. Make memory.soft_limit_in_bytes and cgroup.event_control return -EOPNOTSUPP on PREEMPT_RT. Make an empty memcg_check_events() and memcg_write_event_control() which return only -EOPNOTSUPP on PREEMPT_RT. Document that the two knobs are disabled on PREEMPT_RT. Link: https://lkml.kernel.org/r/20220226204144.1008339-3-bigeasy@linutronix.de Suggested-by: Michal Hocko <mhocko@kernel.org> Suggested-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Michal Hocko
|
fead2b8697 |
mm/memcg: revert ("mm/memcg: optimize user context object stock access")
Patch series "mm/memcg: Address PREEMPT_RT problems instead of disabling it", v5. This series aims to address the memcg related problem on PREEMPT_RT. I tested them on CONFIG_PREEMPT and CONFIG_PREEMPT_RT with the tools/testing/selftests/cgroup/* tests and I haven't observed any regressions (other than the lockdep report that is already there). This patch (of 6): The optimisation is based on a micro benchmark where local_irq_save() is more expensive than a preempt_disable(). There is no evidence that it is visible in a real-world workload and there are CPUs where the opposite is true (local_irq_save() is cheaper than preempt_disable()). Based on micro benchmarks, the optimisation makes sense on PREEMPT_NONE where preempt_disable() is optimized away. There is no improvement with PREEMPT_DYNAMIC since the preemption counter is always available. The optimization makes also the PREEMPT_RT integration more complicated since most of the assumption are not true on PREEMPT_RT. Revert the optimisation since it complicates the PREEMPT_RT integration and the improvement is hardly visible. [bigeasy@linutronix.de: patch body around Michal's diff] Link: https://lkml.kernel.org/r/20220226204144.1008339-1-bigeasy@linutronix.de Link: https://lore.kernel.org/all/YgOGkXXCrD%2F1k+p4@dhcp22.suse.cz Link: https://lkml.kernel.org/r/YdX+INO9gQje6d0S@linutronix.de Link: https://lkml.kernel.org/r/20220226204144.1008339-2-bigeasy@linutronix.de Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Waiman Long <longman@redhat.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Randy Dunlap
|
460a79e188 |
mm/memcontrol: return 1 from cgroup.memory __setup() handler
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).
The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory". This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it. (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.
Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.
Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid
Link: https://lkml.kernel.org/r/20220222005811.10672-1-rdunlap@infradead.org
Fixes:
|
|
|
Shakeel Butt
|
c9afe31ec4 |
memcg: synchronously enforce memory.high for large overcharges
The high limit is used to throttle the workload without invoking the oom-killer. Recently we tried to use the high limit to right size our internal workloads. More specifically dynamically adjusting the limits of the workload without letting the workload get oom-killed. However due to the limitation of the implementation of high limit enforcement, we observed the mechanism fails for some real workloads. The high limit is enforced on return-to-userspace i.e. the kernel let the usage goes over the limit and when the execution returns to userspace, the high reclaim is triggered and the process can get throttled as well. However this mechanism fails for workloads which do large allocations in a single kernel entry e.g. applications that mlock() a large chunk of memory in a single syscall. Such applications bypass the high limit and can trigger the oom-killer. To make high limit enforcement more robust, this patch makes the limit enforcement synchronous only if the accumulated overcharge becomes larger than MEMCG_CHARGE_BATCH. So, most of the allocations would still be throttled on the return-to-userspace path but only the extreme allocations which accumulates large amount of overcharge without returning to the userspace will be throttled synchronously. The value MEMCG_CHARGE_BATCH is a bit arbitrary but most of other places in the memcg codebase uses this constant therefore for now uses the same one. Link: https://lkml.kernel.org/r/20220211064917.2028469-5-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Chris Down <chris@chrisdown.name> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
1461e8c2b6 |
memcg: unify force charging conditions
Currently the kernel force charges the allocations which have __GFP_HIGH
flag without triggering the memory reclaim. __GFP_HIGH indicates that
the caller is high priority and since commit
|
|
|
Shakeel Butt
|
becdf89d77 |
memcg: refactor mem_cgroup_oom
Patch series "memcg: robust enforcement of memory.high", v2. Due to the semantics of memory.high enforcement i.e. throttle the workload without oom-kill, we are trying to use it for right sizing the workloads in our production environment. However we observed the mechanism fails for some specific applications which does big chunck of allocations in a single syscall. The reason behind this failure is due to the limitation of the memory.high enforcement's current implementation. This patch series solves this issue by enforcing the memory.high synchronously if the current process has accumulated a large amount of high overcharge. This patch (of 4): The function mem_cgroup_oom returns enum which has four possible values but the caller does not care about such values and only cares if the return value is OOM_SUCCESS or not. So, remove the enum altogether and make mem_cgroup_oom returns a simple bool. Link: https://lkml.kernel.org/r/20220211064917.2028469-1-shakeelb@google.com Link: https://lkml.kernel.org/r/20220211064917.2028469-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Wei Yang
|
c857266dca |
mm/memcg: mem_cgroup_per_node is already set to 0 on allocation
kzalloc_node() would set data to 0, so it's not necessary to set it again. Link: https://lkml.kernel.org/r/20220201004643.8391-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yosry Ahmed
|
a8c49af3be |
memcg: add per-memcg total kernel memory stat
Currently memcg stats show several types of kernel memory: kernel stack, page tables, sock, vmalloc, and slab. However, there are other allocations with __GFP_ACCOUNT (or supersets such as GFP_KERNEL_ACCOUNT) that are not accounted in any of those stats, a few examples are: - various kvm allocations (e.g. allocated pages to create vcpus) - io_uring - tmp_page in pipes during pipe_write() - bpf ringbuffers - unix sockets Keeping track of the total kernel memory is essential for the ease of migration from cgroup v1 to v2 as there are large discrepancies between v1's kmem.usage_in_bytes and the sum of the available kernel memory stats in v2. Adding separate memcg stats for all __GFP_ACCOUNT kernel allocations is an impractical maintenance burden as there a lot of those all over the kernel code, with more use cases likely to show up in the future. Therefore, add a "kernel" memcg stat that is analogous to kmem page counter, with added benefits such as using rstat infrastructure which aggregates stats more efficiently. Additionally, this provides a lighter alternative in case the legacy kmem is deprecated in the future [yosryahmed@google.com: v2] Link: https://lkml.kernel.org/r/20220203193856.972500-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20220201200823.3283171-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
086f694a75 |
memcg: replace in_interrupt() with !in_task()
Replace the deprecated in_interrupt() with !in_task() because in_interrupt() returns true for BH disabled even if the call happens in the task context. in_task() is the right interface to differentiate task context from NMI, hard IRQ and softirq contexts. Link: https://lkml.kernel.org/r/20220127162636.3461256-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Matthew Wilcox (Oracle)
|
3ecb0087ec |
mm/memcg: Convert mem_cgroup_swapout() to take a folio
This removes an assumption that THPs are the only kind of compound pages and removes a couple of hidden calls to compound_head. It also documents that you can't pass a tail page to mem_cgroup_swapout(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> |
|
Eric W. Biederman
|
03248addad |
resume_user_mode: Move to resume_user_mode.h
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h. While doing that rename tracehook_notify_resume to resume_user_mode_work. Update all of the places that included tracehook.h for these functions to include resume_user_mode.h instead. Update all of the callers of tracehook_notify_resume to call resume_user_mode_work. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
|
Christoph Hellwig
|
27674ef6c7 |
mm: remove the extra ZONE_DEVICE struct page refcount
ZONE_DEVICE struct pages have an extra reference count that complicates the code for put_page() and several places in the kernel that need to check the reference count to see that a page is not being used (gup, compaction, migration, etc.). Clean up the code so the reference count doesn't need to be treated specially for ZONE_DEVICE pages. Note that this excludes the special idle page wakeup for fsdax pages, which still happens at refcount 1. This is a separate issue and will be sorted out later. Given that only fsdax pages require the notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig symbol can go away and be replaced with a FS_DAX check for this hook in the put_page fastpath. Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>. Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Christian Knig <christian.koenig@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
|
Christoph Hellwig
|
dc90f0846d |
mm: don't include <linux/memremap.h> in <linux/mm.h>
Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
Hugh Dickins
|
07ca760673 |
mm/munlock: maintain page->mlock_count while unevictable
Previous patches have been preparatory: now implement page->mlock_count. The ordering of the "Unevictable LRU" is of no significance, and there is no point holding unevictable pages on a list: place page->mlock_count to overlay page->lru.prev (since page->lru.next is overlaid by compound_head, which needs to be even so as not to satisfy PageTail - though 2 could be added instead of 1 for each mlock, if that's ever an improvement). But it's only safe to rely on or modify page->mlock_count while lruvec lock is held and page is on unevictable "LRU" - we can save lots of edits by continuing to pretend that there's an imaginary LRU here (there is an unevictable count which still needs to be maintained, but not a list). The mlock_count technique suffers from an unreliability much like with page_mlock(): while someone else has the page off LRU, not much can be done. As before, err on the safe side (behave as if mlock_count 0), and let try_to_unlock_one() move the page to unevictable if reclaim finds out later on - a few misplaced pages don't matter, what we want to avoid is imbalancing reclaim by flooding evictable lists with unevictable pages. I am not a fan of "if (!isolate_lru_page(page)) putback_lru_page(page);": if we have taken lruvec lock to get the page off its present list, then we save everyone trouble (and however many extra atomic ops) by putting it on its destination list immediately. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
Roman Gushchin
|
0764db9b49 |
mm: memcg: synchronize objcg lists with a dedicated spinlock
Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:
LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
WARNING: possible circular locking dependency detected
5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
mmap1/202299 is trying to acquire lock:
00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
but task is already holding lock:
00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&sighand->siglock){-.-.}-{2:2}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
__lock_task_sighand+0x90/0x190
cgroup_freeze_task+0x2e/0x90
cgroup_migrate_execute+0x11c/0x608
cgroup_update_dfl_csses+0x246/0x270
cgroup_subtree_control_write+0x238/0x518
kernfs_fop_write_iter+0x13e/0x1e0
new_sync_write+0x100/0x190
vfs_write+0x22c/0x2d8
ksys_write+0x6c/0xf8
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (css_set_lock){..-.}-{2:2}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sighand->siglock);
lock(css_set_lock);
lock(&sighand->siglock);
lock(css_set_lock);
*** DEADLOCK ***
2 locks held by mmap1/202299:
#0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
#1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
stack backtrace:
CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
dump_stack_lvl+0x76/0x98
check_noncircular+0x136/0x158
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x238
lock_acquire+0xb0/0x200
_raw_spin_lock_irqsave+0x6a/0xd8
obj_cgroup_release+0x4a/0xe0
percpu_ref_put_many.constprop.0+0x150/0x168
drain_obj_stock+0x94/0xe8
refill_obj_stock+0x94/0x278
obj_cgroup_charge+0x164/0x1d8
kmem_cache_alloc+0xac/0x528
__sigqueue_alloc+0x150/0x308
__send_signal+0x260/0x550
send_signal+0x7e/0x348
force_sig_info_to_task+0x104/0x180
force_sig_fault+0x48/0x58
__do_pgm_check+0x120/0x1f0
pgm_check_handler+0x11e/0x180
INFO: lockdep is turned off.
In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg. Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.
This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).
In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.
To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.
Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes:
|
|
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
|
|
Shakeel Butt
|
4e5aa1f4c2 |
memcg: add per-memcg vmalloc stat
The kvmalloc* allocation functions can fallback to vmalloc allocations and more often on long running machines. In addition the kernel does have __GFP_ACCOUNT kvmalloc* calls. So, often on long running machines, the memory.stat does not tell the complete picture which type of memory is charged to the memcg. So add a per-memcg vmalloc stat. [shakeelb@google.com: page_memcg() within rcu lock, per Muchun] Link: https://lkml.kernel.org/r/20211222052457.1960701-1-shakeelb@google.com [akpm@linux-foundation.org: remove cast, per Muchun] [shakeelb@google.com: remove area->page[0] checks and move to page by page accounting per Michal] Link: https://lkml.kernel.org/r/20220104222341.3972772-1-shakeelb@google.com Link: https://lkml.kernel.org/r/20211221215336.1922823-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Wang Weiyang
|
06b2c3b08c |
mm/memcg: use struct_size() helper in kzalloc()
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Link: https://lkml.kernel.org/r/20211216022024.127375-1-wangweiyang2@huawei.com Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
5b3be698a8 |
memcg: better bounds on the memcg stats updates
Commit
|
|
Dan Schatzberg
|
b6bf9abb0a |
mm/memcg: add oom_group_kill memory event
Our container agent wants to know when a container exits if it was OOM killed or not to report to the user. We use memory.oom.group = 1 to ensure that OOM kills within the container's cgroup kill everything. Existing memory.events are insufficient for knowing if this triggered: 1) Our current approach reads memory.events oom_kill and reports the container was killed if the value is non-zero. This is erroneous in some cases where containers create their children cgroups with memory.oom.group=1 as such OOM kills will get counted against the container cgroup's oom_kill counter despite not actually OOM killing the entire container. 2) Reading memory.events.local will fail to identify OOM kills in leaf cgroups (that don't set memory.oom.group) within the container cgroup. This patch adds a new oom_group_kill event when memory.oom.group triggers to allow userspace to cleanly identify when an entire cgroup is oom killed. [schatzberg.dan@gmail.com: changes from Johannes and Chris] Link: https://lkml.kernel.org/r/20211213162511.2492267-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20211203162426.3375036-1-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Chris Down <chris@chrisdown.name> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alexs@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
17c1736775 |
mm: memcontrol: make cgroup_memory_nokmem static
Commit
|
|
|
Muchun Song
|
c29b5b3d33 |
mm: slab: make slab iterator functions static
There is no external users of slab_start/next/stop(), so make them static. And the memory.kmem.slabinfo is deprecated, which outputs nothing now, so move memcg_slab_show() into mm/memcontrol.c and rename it to mem_cgroup_slab_show to be consistent with other function names. Link: https://lkml.kernel.org/r/20211109133359.32881-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Vlastimil Babka
|
4b5f8d9a89 |
mm/memcg: Convert slab objcgs from struct page to struct slab
page->memcg_data is used with MEMCG_DATA_OBJCGS flag only for slab pages so convert all the related infrastructure to struct slab. Also use struct folio instead of struct page when resolving object pointers. This is not just mechanistic changing of types and names. Now in mem_cgroup_from_obj() we use folio_test_slab() to decide if we interpret the folio as a real slab instead of a large kmalloc, instead of relying on MEMCG_DATA_OBJCGS bit that used to be checked in page_objcgs_check(). Similarly in memcg_slab_free_hook() where we can encounter kmalloc_large() pages (here the folio slab flag check is implied by virt_to_slab()). As a result, page_objcgs_check() can be dropped instead of converted. To avoid include cycles, move the inline definition of slab_objcgs() from memcontrol.h to mm/slab.h. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <cgroups@vger.kernel.org> |
|
|
Vlastimil Babka
|
40f3bf0cb0 |
mm: Convert struct page to struct slab in functions used by other subsystems
KASAN, KFENCE and memcg interact with SLAB or SLUB internals through
functions nearest_obj(), obj_to_index() and objs_per_slab() that use
struct page as parameter. This patch converts it to struct slab
including all callers, through a coccinelle semantic patch.
// Options: --include-headers --no-includes --smpl-spacing include/linux/slab_def.h include/linux/slub_def.h mm/slab.h mm/kasan/*.c mm/kfence/kfence_test.c mm/memcontrol.c mm/slab.c mm/slub.c
// Note: needs coccinelle 1.1.1 to avoid breaking whitespace
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
{ ... }
@@
@@
-objs_per_slab_page(
+objs_per_slab(
...
)
@@
identifier fn =~ "obj_to_index|objs_per_slab";
@@
fn(...,
- const struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj";
@@
fn(...,
- struct page *page
+ const struct slab *slab
,...)
{
<...
(
- page_address(page)
+ slab_address(slab)
|
- page
+ slab
)
...>
}
@@
identifier fn =~ "nearest_obj|obj_to_index|objs_per_slab";
expression E;
@@
fn(...,
(
- slab_page(E)
+ E
|
- virt_to_page(E)
+ virt_to_slab(E)
|
- virt_to_head_page(E)
+ virt_to_slab(E)
|
- page
+ page_slab(page)
)
,...)
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <kasan-dev@googlegroups.com>
Cc: <cgroups@vger.kernel.org>
|
|
Waiman Long
|
a7ebf564de |
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
All the calls to mod_objcg_mlstate(), get_obj_stock() and put_obj_stock() are done by functions defined within the same "#ifdef CONFIG_MEMCG_KMEM" compilation block. When CONFIG_MEMCG_KMEM isn't defined, the following compilation warnings will be issued [1] and [2]. mm/memcontrol.c:785:20: warning: unused function 'mod_objcg_mlstate' mm/memcontrol.c:2113:33: warning: unused function 'get_obj_stock' Fix these warning by moving those functions to under the same CONFIG_MEMCG_KMEM compilation block. There is no functional change. [1] https://lore.kernel.org/lkml/202111272014.WOYNLUV6-lkp@intel.com/ [2] https://lore.kernel.org/lkml/202111280551.LXsWYt1T-lkp@intel.com/ Link: https://lkml.kernel.org/r/20211129161140.306488-1-longman@redhat.com Fixes: |
|
|
Matthew Wilcox (Oracle)
|
9c3252152e |
mm: Rename folio_test_multi to folio_test_large
This is a better name. Also add kernel-doc. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
|
Christoph Hellwig
|
ab2f9d2d36 |
mm: unexport {,un}lock_page_memcg
These are only used in built-in core mm code. Link: https://lkml.kernel.org/r/20210820095815.445392-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Christoph Hellwig
|
913ffbdd99 |
mm: unexport folio_memcg_{,un}lock
Patch series "unexport memcg locking helpers".
Neither the old page-based nor the new folio-based memcg locking helpers
are used in modular code at all, so drop the exports.
This patch (of 2):
folio_memcg_{,un}lock are only used in built-in core mm code.
Link: https://lkml.kernel.org/r/20210820095815.445392-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210820095815.445392-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
|
Mel Gorman
|
69392a403f |
mm/vmscan: throttle reclaim when no progress is being made
Memcg reclaim throttles on congestion if no reclaim progress is made. This makes little sense, it might be due to writeback or a host of other factors. For !memcg reclaim, it's messy. Direct reclaim primarily is throttled in the page allocator if it is failing to make progress. Kswapd throttles if too many pages are under writeback and marked for immediate reclaim. This patch explicitly throttles if reclaim is failing to make progress. [vbabka@suse.cz: Remove redundant code] Link: https://lkml.kernel.org/r/20211022144651.19914-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: NeilBrown <neilb@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Vasily Averin
|
a4ebf1b6ca |
memcg: prohibit unconditional exceeding the limit of dying tasks
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting. This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves. There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.
The above assumption is overly optimistic though. E.g. vmalloc can
scale to really large requests and the heuristic would allow that. We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit
|
|
|
Muchun Song
|
e80216d9f1 |
mm: memcontrol: remove the kmem states
Now the kmem states is only used to indicate whether the kmem is offline. However, we can set ->kmemcg_id to -1 to indicate whether the kmem is offline. Finally, we can remove the kmem states to simplify the code. Link: https://lkml.kernel.org/r/20211025125259.56624-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
6426886811 |
mm: memcontrol: remove kmemcg_id reparenting
Since slab objects and kmem pages are charged to object cgroup instead of memory cgroup, memcg_reparent_objcgs() will reparent this cgroup and all its descendants to its parent cgroup. This already makes further list_lru_add()'s add elements to the parent's list. So it is unnecessary to change kmemcg_id of an offline cgroup to its parent's id. It just wastes CPU cycles. Just remove the redundant code. Link: https://lkml.kernel.org/r/20211025125102.56533-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
58056f7750 |
memcg, kmem: further deprecate kmem.limit_in_bytes
The deprecation process of kmem.limit_in_bytes started with the commit
|
|
|
Waiman Long
|
38d4ef44ee |
mm/memcg: remove obsolete memcg_free_kmem()
Since commit
|
|
|
Shakeel Butt
|
fd25a9e0e2 |
memcg: unify memcg stat flushing
The memcg stats can be flushed in multiple context and potentially in
parallel too. For example multiple parallel user space readers for
memcg stats will contend on the rstat locks with each other. There is
no need for that. We just need one flusher and everyone else can
benefit.
In addition after
|
|
|
Shakeel Butt
|
11192d9c12 |
memcg: flush stats only if updated
At the moment, the kernel flushes the memcg stats on every refault and also on every reclaim iteration. Although rstat maintains per-cpu update tree but on the flush the kernel still has to go through all the cpu rstat update tree to check if there is anything to flush. This patch adds the tracking on the stats update side to make flush side more clever by skipping the flush if there is no update. The stats update codepath is very sensitive performance wise for many workloads and benchmarks. So, we can not follow what the commit |
|
|
Peter Xu
|
48384b0b76 |
mm/memcg: drop swp_entry_t* in mc_handle_file_pte()
It is unused after the rework of commit
|
|
|
Matthew Wilcox (Oracle)
|
e809c3fede |
mm/memcg: Add folio_lruvec_lock() and similar functions
These are the folio equivalents of lock_page_lruvec() and similar functions. Also convert lruvec_memcg_debug() to take a folio. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
b1baabd995 |
mm/memcg: Add folio_lruvec()
This replaces mem_cgroup_page_lruvec(). All callers converted. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
fcce4672c0 |
mm/memcg: Convert mem_cgroup_move_account() to use a folio
This saves dozens of bytes of text by eliminating a lot of calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
f70ad44874 |
mm/memcg: Add folio_memcg_lock() and folio_memcg_unlock()
These are the folio equivalents of lock_page_memcg() and unlock_page_memcg(). lock_page_memcg() and unlock_page_memcg() have too many callers to be easily replaced in a single patch, so reimplement them as wrappers for now to be cleaned up later when enough callers have been converted to use folios. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
9d8053fc7a |
mm/memcg: Convert mem_cgroup_track_foreign_dirty_slowpath() to folio
The page was only being used for the memcg and to gather trace information, so this is a simple conversion. The only caller of mem_cgroup_track_foreign_dirty() will be converted to folios in a later patch, so doing this now makes that patch simpler. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
d21bba2b7d |
mm/memcg: Convert mem_cgroup_migrate() to take folios
Convert all callers of mem_cgroup_migrate() to call page_folio() first. They all look like they're using head pages already, but this proves it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
bbc6b703b2 |
mm/memcg: Convert mem_cgroup_uncharge() to take a folio
Convert all the callers to call page_folio(). Most of them were already using a head page, but a few of them I can't prove were, so this may actually fix a bug. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
c4ed6ebfcb |
mm/memcg: Convert uncharge_page() to uncharge_folio()
Use a folio rather than a page to ensure that we're only operating on base or head pages, and not tail pages. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
8f425e4ed0 |
mm/memcg: Convert mem_cgroup_charge() to take a folio
Convert all callers of mem_cgroup_charge() to call page_folio() on the page they're currently passing in. Many of them will be converted to use folios themselves soon. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
118f287549 |
mm/memcg: Convert commit_charge() to take a folio
The memcg_data is only set on the head page, so enforce that by typing it as a folio. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
1b7e4464d4 |
mm/memcg: Add folio_memcg() and related functions
memcg information is only stored in the head page, so the memcg subsystem needs to assure that all accesses are to the head page. The first step is converting page_memcg() to folio_memcg(). The callers of page_memcg() and PageMemcgKmem() are not yet ready to be converted to use folios, so retain them as wrappers around folio_memcg() and folio_memcg_kmem(). They will be converted in a later patch set. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
8e88bd2dfd |
mm/memcg: Convert memcg_check_events to take a node ID
memcg_check_events only uses the page's nid, so call page_to_nid in the callers to make the interface easier to understand. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
2ab082ba76 |
mm/memcg: Remove soft_limit_tree_node()
Opencode this one-line function in its three callers. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
658b69c9d8 |
mm/memcg: Use the node id in mem_cgroup_update_tree()
By using the node id in mem_cgroup_update_tree(), we can delete soft_limit_tree_from_page() and mem_cgroup_page_nodeinfo(). Saves 42 bytes of kernel text on my config. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> |
|
|
Matthew Wilcox (Oracle)
|
6e0110c247 |
mm/memcg: Remove 'page' parameter to mem_cgroup_charge_statistics()
The last use of 'page' was removed by commit
|
|
|
Shakeel Butt
|
1f828223b7 |
memcg: flush lruvec stats in the refault
Prior to the commit |
|
|
Linus Torvalds
|
14726903c8 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ... |
|
Hui Su
|
9647875be5 |
mm/vmpressure: replace vmpressure_to_css() with vmpressure_to_memcg()
We can get memcg directly form vmpr instead of vmpr->memcg->css->memcg, so add a new func helper vmpressure_to_memcg(). And no code will use vmpressure_to_css(), so delete it. Link: https://lkml.kernel.org/r/20210630112146.455103-1-suhui@zeku.com Signed-off-by: Hui Su <suhui@zeku.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
4ba9515d32 |
memcg: make memcg->event_list_lock irqsafe
The memcg->event_list_lock is usually taken in the normal context but when the userspace closes the corresponding eventfd, eventfd_release through memcg_event_wake takes memcg->event_list_lock with interrupts disabled. This is not an issue on its own but it creates a nested dependency from eventfd_ctx->wqh.lock to memcg->event_list_lock. Independently, for unrelated eventfd, eventfd_signal() can be called in the irq context, thus making eventfd_ctx->wqh.lock an irq lock. For example, FPGA DFL driver, VHOST VPDA driver and couple of VFIO drivers. This will force memcg->event_list_lock to be an irqsafe lock as well. One way to break the nested dependency between eventfd_ctx->wqh.lock and memcg->event_list_lock is to add an indirection. However the simplest solution would be to make memcg->event_list_lock irqsafe. This is cgroup v1 feature, is in maintenance and may get deprecated in near future. So, no need to add more code. BTW this has been discussed previously [1] but there weren't irq users of eventfd_signal() at the time. [1] https://www.spinics.net/lists/cgroups/msg06248.html Link: https://lkml.kernel.org/r/20210830172953.207257-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Michal Hocko
|
5c49cf9ad6 |
memcg: fix up drain_local_stock comment
Thomas and Vlastimil have noticed that the comment in drain_local_stock doesn't quite make sense. It talks about a synchronization with the memory hotplug but there is no actual memory hotplug involvement here. I meant to talk about cpu hotplug here. Fix that up and hopefuly make the comment more helpful by referencing the cpu hotplug callback as well. Link: https://lkml.kernel.org/r/YRDwOhVglJmY7ES5@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Miaohe Lin
|
27fb0956ed |
mm, memcg: save some atomic ops when flush is already true
Add 'else' to save some atomic ops in obj_stock_flush_required() when flush is already true. No functional change intended here. Link: https://lkml.kernel.org/r/20210807082835.61281-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Alex Shi <alexs@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Baolin Wang
|
37bc3cb9bb |
mm: memcontrol: set the correct memcg swappiness restriction
Since commit |
|
|
Vasily Averin
|
55a68c8239 |
memcg: replace in_interrupt() by !in_task() in active_memcg()
set_active_memcg() uses in_interrupt() check to select proper storage for
cgroup: pointer on task struct or per-cpu pointer.
It isn't fully correct: obsoleted in_interrupt() includes tasks with
disabled BH. It's better to use '!in_task()' instead.
Link: https://lkml.org/lkml/2021/7/26/487
Link: https://lkml.kernel.org/r/ed4448b0-4970-616f-7368-ef9dd3cb628d@virtuozzo.com
Fixes:
|
|
|
Shakeel Butt
|
aa48e47e39 |
memcg: infrastructure to flush memcg stats
At the moment memcg stats are read in four contexts: 1. memcg stat user interfaces 2. dirty throttling 3. page fault 4. memory reclaim Currently the kernel flushes the stats for first two cases. Flushing the stats for remaining two casese may have performance impact. Always flushing the memcg stats on the page fault code path may negatively impacts the performance of the applications. In addition flushing in the memory reclaim code path, though treated as slowpath, can become the source of contention for the global lock taken for stat flushing because when system or memcg is under memory pressure, many tasks may enter the reclaim path. This patch uses following mechanisms to solve these challenges: 1. Periodically flush the stats from root memcg every 2 seconds. This will time limit the out of sync stats. 2. Asynchronously flush the stats after fixed number of stat updates. In the worst case the stat can be out of sync by O(nr_cpus * BATCH) for 2 seconds. 3. For avoiding thundering herd to flush the stats particularly from the memory reclaim context, introduce memcg local spinlock and let only one flusher active at a time. This could have been done through cgroup_rstat_lock lock but that lock is used by other subsystem and for userspace reading memcg stats. So, it is better to keep flushers introduced by this patch decoupled from cgroup_rstat_lock. However we would have to use irqsafe version of rstat flush but that is fine as this code path will be flushing for whole tree and do the work for everyone. No one will be waiting for that worker. [shakeelb@google.com: fix sleep-in-wrong context bug] Link: https://lkml.kernel.org/r/20210716212137.1391164-2-shakeelb@google.com Link: https://lkml.kernel.org/r/20210714013948.270662-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
7e1c0d6f58 |
memcg: switch lruvec stats to rstat
The commit |
|
Suren Baghdasaryan
|
01c4b28cd2 |
mm, memcg: inline swap-related functions to improve disabled memcg config
Inline mem_cgroup_try_charge_swap, mem_cgroup_uncharge_swap and
cgroup_throttle_swaprate functions to perform mem_cgroup_disabled static
key check inline before calling the main body of the function. This
minimizes the memcg overhead in the pagefault and exit_mmap paths when
memcgs are disabled using cgroup_disable=memory command-line option. This
change results in ~1% overhead reduction when running PFT test [1]
comparing {CONFIG_MEMCG=n} against {CONFIG_MEMCG=y, cgroup_disable=memory}
configuration on an 8-core ARM64 Android device.
[1] https://lkml.org/lkml/2006/8/29/294 also used in mmtests suite
Link: https://lkml.kernel.org/r/20210713010934.299876-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Suren Baghdasaryan
|
2c8d8f97ae |
mm, memcg: inline mem_cgroup_{charge/uncharge} to improve disabled memcg config
Inline mem_cgroup_{charge/uncharge} and mem_cgroup_uncharge_list functions
functions to perform mem_cgroup_disabled static key check inline before
calling the main body of the function. This minimizes the memcg overhead
in the pagefault and exit_mmap paths when memcgs are disabled using
cgroup_disable=memory command-line option.
This change results in ~0.4% overhead reduction when running PFT test [1]
comparing {CONFIG_MEMCG=n} against {CONFIG_MEMCG=y, cgroup_disable=memory}
configuration on an 8-core ARM64 Android device.
[1] https://lkml.org/lkml/2006/8/29/294 also used in mmtests suite
Link: https://lkml.kernel.org/r/20210713010934.299876-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Suren Baghdasaryan
|
56cab2859f |
mm, memcg: add mem_cgroup_disabled checks in vmpressure and swap-related functions
Add mem_cgroup_disabled check in vmpressure, mem_cgroup_uncharge_swap and
cgroup_throttle_swaprate functions. This minimizes the memcg overhead in
the pagefault and exit_mmap paths when memcgs are disabled using
cgroup_disable=memory command-line option.
This change results in ~2.1% overhead reduction when running PFT test [1]
comparing {CONFIG_MEMCG=n, CONFIG_MEMCG_SWAP=n} against {CONFIG_MEMCG=y,
CONFIG_MEMCG_SWAP=y, cgroup_disable=memory} configuration on an 8-core
ARM64 Android device.
[1] https://lkml.org/lkml/2006/8/29/294 also used in mmtests suite
Link: https://lkml.kernel.org/r/20210713010934.299876-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Shakeel Butt
|
7490a2d248 |
writeback: memcg: simplify cgroup_writeback_by_id
Currently cgroup_writeback_by_id calls mem_cgroup_wb_stats() to get dirty pages for a memcg. However mem_cgroup_wb_stats() does a lot more than just get the number of dirty pages. Just directly get the number of dirty pages instead of calling mem_cgroup_wb_stats(). Also cgroup_writeback_by_id() is only called for best-effort dirty flushing, so remove the unused 'nr' parameter and no need to explicitly flush memcg stats. Link: https://lkml.kernel.org/r/20210722182627.2267368-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Jakub Kicinski
|
f444fea789 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/ptp/Kconfig: |
|
Wei Wang
|
4b1327be9f |
net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()
Add gfp_t mask as an input parameter to mem_cgroup_charge_skmem(), to give more control to the networking stack and enable it to change memcg charging behavior. In the future, the networking stack may decide to avoid oom-kills when fallbacks are more appropriate. One behavior change in mem_cgroup_charge_skmem() by this patch is to avoid force charging by default and let the caller decide when and if force charging is needed through the presence or absence of __GFP_NOFAIL. Signed-off-by: Wei Wang <weiwan@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Waiman Long
|
7fa0dacbaf |
mm/memcg: fix incorrect flushing of lruvec data in obj_stock
When mod_objcg_state() is called with a pgdat that is different from
that in the obj_stock, the old lruvec data cached in obj_stock are
flushed out. Unfortunately, they were flushed to the new pgdat and so
the data go to the wrong node. This will screw up the slab data
reported in /sys/devices/system/node/node*/meminfo.
Fix that by flushing the data to the cached pgdat instead.
Link: https://lkml.kernel.org/r/20210802143834.30578-1-longman@redhat.com
Fixes:
|
|
|
Jakub Kicinski
|
d2e11fd2b7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c |
|
|
Johannes Weiner
|
30def93565 |
mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
Dan Carpenter reports:
The patch 2d146aa3aa84: "mm: memcontrol: switch to rstat" from Apr
29, 2021, leads to the following static checker warning:
kernel/cgroup/rstat.c:200 cgroup_rstat_flush()
warn: sleeping in atomic context
mm/memcontrol.c
3572 static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
3573 {
3574 unsigned long val;
3575
3576 if (mem_cgroup_is_root(memcg)) {
3577 cgroup_rstat_flush(memcg->css.cgroup);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is from static analysis and potentially a false positive. The
problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold()
which holds an rcu_read_lock(). And the cgroup_rstat_flush() function
can sleep.
3578 val = memcg_page_state(memcg, NR_FILE_PAGES) +
3579 memcg_page_state(memcg, NR_ANON_MAPPED);
3580 if (swap)
3581 val += memcg_page_state(memcg, MEMCG_SWAP);
3582 } else {
3583 if (!swap)
3584 val = page_counter_read(&memcg->memory);
3585 else
3586 val = page_counter_read(&memcg->memsw);
3587 }
3588 return val;
3589 }
__mem_cgroup_threshold() indeed holds the rcu lock. In addition, the
thresholding code is invoked during stat changes, and those contexts
have irqs disabled as well. If the lock breaking occurs inside the
flush function, it will result in a sleep from an atomic context.
Use the irqsafe flushing variant in mem_cgroup_usage() to fix this.
Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org
Fixes:
|
|
|
Vasily Averin
|
6126891c6d |
memcg: enable accounting for IP address and routing-related objects
An netadmin inside container can use 'ip a a' and 'ip r a' to assign a large number of ipv4/ipv6 addresses and routing entries and force kernel to allocate megabytes of unaccounted memory for long-lived per-netdevice related kernel objects: 'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node', 'struct rt6_info', 'struct fib_rules' and ip_fib caches. These objects can be manually removed, though usually they lives in memory till destroy of its net namespace. It makes sense to account for them to restrict the host's memory consumption from inside the memcg-limited container. One of such objects is the 'struct fib6_node' mostly allocated in net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section: write_lock_bh(&table->tb6_lock); err = fib6_add(&table->tb6_root, rt, info, mxc); write_unlock_bh(&table->tb6_lock); In this case it is not enough to simply add SLAB_ACCOUNT to corresponding kmem cache. The proper memory cgroup still cannot be found due to the incorrect 'in_interrupt()' check used in memcg_kmem_bypass(). Obsoleted in_interrupt() does not describe real execution context properly. >From include/linux/preempt.h: The following macros are deprecated and should not be used in new code: in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled To verify the current execution context new macro should be used instead: in_task() - We're in task context Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Linus Torvalds
|
71bd934101 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "190 patches. Subsystems affected by this patch series: mm (hugetlb, userfaultfd, vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock, migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap, zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc, core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs, signals, exec, kcov, selftests, compress/decompress, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) ipc/util.c: use binary search for max_idx ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock ipc: use kmalloc for msg_queue and shmid_kernel ipc sem: use kvmalloc for sem_undo allocation lib/decompressors: remove set but not used variabled 'level' selftests/vm/pkeys: exercise x86 XSAVE init state selftests/vm/pkeys: refill shadow register after implicit kernel write selftests/vm/pkeys: handle negative sys_pkey_alloc() return code selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random kcov: add __no_sanitize_coverage to fix noinstr for all architectures exec: remove checks in __register_bimfmt() x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned hfsplus: report create_date to kstat.btime hfsplus: remove unnecessary oom message nilfs2: remove redundant continue statement in a while-loop kprobes: remove duplicated strong free_insn_page in x86 and s390 init: print out unknown kernel parameters checkpatch: do not complain about positive return values starting with EPOLL checkpatch: improve the indented label test checkpatch: scripts/spdxcheck.py now requires python3 ... |
|
|
Linus Torvalds
|
e267992f9e |
Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou: - percpu chunk depopulation - depopulate backing pages for chunks with empty pages when we exceed a global threshold without those pages. This lets us reclaim a portion of memory that would previously be lost until the full chunk would be freed (possibly never). - memcg accounting cleanup - previously separate chunks were managed for normal allocations and __GFP_ACCOUNT allocations. These are now consolidated which cleans up the code quite a bit. - a few misc clean ups for clang warnings * 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: optimize locking in pcpu_balance_workfn() percpu: initialize best_upa variable percpu: rework memcg accounting mm, memcg: introduce mem_cgroup_kmem_disabled() mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init percpu: make symbol 'pcpu_free_slot' static percpu: implement partial chunk depopulation percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1 percpu: factor out pcpu_check_block_hint() percpu: split __pcpu_balance_workfn() percpu: fix a comment about the chunks ordering |
|
Alistair Popple
|
af5cdaf822 |
mm: remove special swap entry functions
Patch series "Add support for SVM atomics in Nouveau", v11. Introduction ============ Some devices have features such as atomic PTE bits that can be used to implement atomic access to system memory. To support atomic operations to a shared virtual memory page such a device needs access to that page which is exclusive of the CPU. This series introduces a mechanism to temporarily unmap pages granting exclusive access to a device. These changes are required to support OpenCL atomic operations in Nouveau to shared virtual memory (SVM) regions allocated with the CL_MEM_SVM_ATOMICS clSVMAlloc flag. A more complete description of the OpenCL SVM feature is available at https://www.khronos.org/registry/OpenCL/specs/3.0-unified/html/ OpenCL_API.html#_shared_virtual_memory . Implementation ============== Exclusive device access is implemented by adding a new swap entry type (SWAP_DEVICE_EXCLUSIVE) which is similar to a migration entry. The main difference is that on fault the original entry is immediately restored by the fault handler instead of waiting. Restoring the entry triggers calls to MMU notifers which allows a device driver to revoke the atomic access permission from the GPU prior to the CPU finalising the entry. Patches ======= Patches 1 & 2 refactor existing migration and device private entry functions. Patches 3 & 4 rework try_to_unmap_one() by splitting out unrelated functionality into separate functions - try_to_migrate_one() and try_to_munlock_one(). Patch 5 renames some existing code but does not introduce functionality. Patch 6 is a small clean-up to swap entry handling in copy_pte_range(). Patch 7 contains the bulk of the implementation for device exclusive memory. Patch 8 contains some additions to the HMM selftests to ensure everything works as expected. Patch 9 is a cleanup for the Nouveau SVM implementation. Patch 10 contains the implementation of atomic access for the Nouveau driver. Testing ======= This has been tested with upstream Mesa 21.1.0 and a simple OpenCL program which checks that GPU atomic accesses to system memory are atomic. Without this series the test fails as there is no way of write-protecting the page mapping which results in the device clobbering CPU writes. For reference the test is available at https://ozlabs.org/~apopple/opencl_svm_atomics/ Further testing has been performed by adding support for testing exclusive access to the hmm-tests kselftests. This patch (of 10): Remove multiple similar inline functions for dealing with different types of special swap entries. Both migration and device private swap entries use the swap offset to store a pfn. Instead of multiple inline functions to obtain a struct page for each swap entry type use a common function pfn_swap_entry_to_page(). Also open-code the various entry_to_pfn() functions as this results is shorter code that is easier to understand. Link: https://lkml.kernel.org/r/20210616105937.23201-1-apopple@nvidia.com Link: https://lkml.kernel.org/r/20210616105937.23201-2-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mel Gorman
|
05395718b2 |
mm/memcontrol.c: fix kerneldoc comment for mem_cgroup_calculate_protection
make W=1 generates the following warning for mem_cgroup_calculate_protection mm/memcontrol.c:6468: warning: expecting prototype for mem_cgroup_protected(). Prototype was for mem_cgroup_calculate_protection() instead Commit |
|
|
Dan Schatzberg
|
c74d40e8b5 |
loop: charge i/o to mem and blk cg
The current code only associates with the existing blkcg when aio is used to access the backing file. This patch covers all types of i/o to the backing file and also associates the memcg so if the backing file is on tmpfs, memory is charged appropriately. This patch also exports cgroup_get_e_css and int_active_memcg so it can be used by the loop module. Link: https://lkml.kernel.org/r/20210610173944.1203706-4-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Chris Down <chris@chrisdown.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Dan Schatzberg
|
04f94e3fbe |
mm: charge active memcg when no mm is set
set_active_memcg() worked for kernel allocations but was silently ignored for user pages. This patch establishes a precedence order for who gets charged: 1. If there is a memcg associated with the page already, that memcg is charged. This happens during swapin. 2. If an explicit mm is passed, mm->memcg is charged. This happens during page faults, which can be triggered in remote VMs (eg gup). 3. Otherwise consult the current process context. If there is an active_memcg, use that. Otherwise, current->mm->memcg. Previously, if a NULL mm was passed to mem_cgroup_charge (case 3) it would always charge the root cgroup. Now it looks up the active_memcg first (falling back to charging the root cgroup if not set). Link: https://lkml.kernel.org/r/20210610173944.1203706-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
271dd6b1f6 |
mm: memcontrol: move obj_cgroup_uncharge_pages() out of css_set_lock
The css_set_lock is used to guard the list of inherited objcgs. So there is no need to uncharge kernel memory under css_set_lock. Just move it out of the lock. Link: https://lkml.kernel.org/r/20210417043538.9793-8-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
9838354e16 |
mm: memcontrol: simplify the logic of objcg pinning memcg
The obj_cgroup_release() and memcg_reparent_objcgs() are serialized by the css_set_lock. We do not need to care about objcg->memcg being released in the process of obj_cgroup_release(). So there is no need to pin memcg before releasing objcg. Remove those pinning logic to simplfy the code. There are only two places that modifies the objcg->memcg. One is the initialization to objcg->memcg in the memcg_online_kmem(), another is objcgs reparenting in the memcg_reparent_objcgs(). It is also impossible for the two to run in parallel. So xchg() is unnecessary and it is enough to use WRITE_ONCE(). Link: https://lkml.kernel.org/r/20210417043538.9793-7-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
a984226f45 |
mm: memcontrol: remove the pgdata parameter of mem_cgroup_page_lruvec
All the callers of mem_cgroup_page_lruvec() just pass page_pgdat(page) as the 2nd parameter to it (except isolate_migratepages_block()). But for isolate_migratepages_block(), the page_pgdat(page) is also equal to the local variable of @pgdat. So mem_cgroup_page_lruvec() do not need the pgdat parameter. Just remove it to simplify the code. Link: https://lkml.kernel.org/r/20210417043538.9793-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
2884b6b7ee |
mm: memcontrol: bail out early when !mm in get_mem_cgroup_from_mm
When mm is NULL, we do not need to hold rcu lock and call css_tryget for the root memcg. And we also do not need to check !mm in every loop of while. So bail out early when !mm. Link: https://lkml.kernel.org/r/20210417043538.9793-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
8dc87c7d1f |
mm: memcontrol: fix page charging in page replacement
Patch series "memcontrol code cleanup and simplification", v3. This patch (of 8): The pages aren't accounted at the root level, so do not charge the page to the root memcg in page replacement. Although we do not display the value (mem_cgroup_usage) so there shouldn't be any actual problem, but there is a WARN_ON_ONCE in the page_counter_cancel(). Who knows if it will trigger? So it is better to fix it. Link: https://lkml.kernel.org/r/20210417043538.9793-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20210417043538.9793-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
c5c8b16b59 |
mm: memcontrol: fix root_mem_cgroup charging
The below scenario can cause the page counters of the root_mem_cgroup to
be out of balance.
CPU0: CPU1:
objcg = get_obj_cgroup_from_current()
obj_cgroup_charge_pages(objcg)
memcg_reparent_objcgs()
// reparent to root_mem_cgroup
WRITE_ONCE(iter->memcg, parent)
// memcg == root_mem_cgroup
memcg = get_mem_cgroup_from_objcg(objcg)
// do not charge to the root_mem_cgroup
try_charge(memcg)
obj_cgroup_uncharge_pages(objcg)
memcg = get_mem_cgroup_from_objcg(objcg)
// uncharge from the root_mem_cgroup
refill_stock(memcg)
drain_stock(memcg)
page_counter_uncharge(&memcg->memory)
get_obj_cgroup_from_current() never returns a root_mem_cgroup's objcg, so
we never explicitly charge the root_mem_cgroup. And it's not going to
change. It's all about a race when we got an obj_cgroup pointing at some
non-root memcg, but before we were able to charge it, the cgroup was gone,
objcg was reparented to the root and so we're skipping the charging. Then
we store the objcg pointer and later use to uncharge the root_mem_cgroup.
This can cause the page counter to be less than the actual value.
Although we do not display the value (mem_cgroup_usage) so there shouldn't
be any actual problem, but there is a WARN_ON_ONCE in the
page_counter_cancel(). Who knows if it will trigger? So it is better to
fix it.
Link: https://lkml.kernel.org/r/20210425075410.19255-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Waiman Long
|
494c1dfe85 |
mm: memcg/slab: create a new set of kmalloc-cg-<n> caches
There are currently two problems in the way the objcg pointer array (memcg_data) in the page structure is being allocated and freed. On its allocation, it is possible that the allocated objcg pointer array comes from the same slab that requires memory accounting. If this happens, the slab will never become empty again as there is at least one object left (the obj_cgroup array) in the slab. When it is freed, the objcg pointer array object may be the last one in its slab and hence causes kfree() to be called again. With the right workload, the slab cache may be set up in a way that allows the recursive kfree() calling loop to nest deep enough to cause a kernel stack overflow and panic the system. One way to solve this problem is to split the kmalloc-<n> caches (KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n> (KMALLOC_NORMAL) caches for unaccounted objects only and a new set of kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All the other caches can still allow a mix of accounted and unaccounted objects. With this change, all the objcg pointer array objects will come from KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So both the recursive kfree() problem and non-freeable slab problem are gone. Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer have mixed accounted and unaccounted objects, this will slightly reduce the number of objcg pointer arrays that need to be allocated and save a bit of memory. On the other hand, creating a new set of kmalloc caches does have the effect of reducing cache utilization. So it is properly a wash. The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches() will include the newly added caches without change. [vbabka@suse.cz: don't create kmalloc-cg caches with cgroup.memory=nokmem] Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com [akpm@linux-foundation.org: un-fat-finger v5 delta creation] [longman@redhat.com: disable cache merging for KMALLOC_NORMAL caches] Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.com Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com Link: https://lkml.kernel.org/r/20210505200610.13943-3-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> [longman@redhat.com: fix for CONFIG_ZONE_DMA=n] Suggested-by: Roman Gushchin <guro@fb.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Waiman Long
|
41eb5df1cb |
mm: memcg/slab: properly set up gfp flags for objcg pointer array
Patch series "mm: memcg/slab: Fix objcg pointer array handling problem", v4.
Since the merging of the new slab memory controller in v5.9, the page
structure stores a pointer to objcg pointer array for slab pages. When
the slab has no used objects, it can be freed in free_slab() which will
call kfree() to free the objcg pointer array in
memcg_alloc_page_obj_cgroups(). If it happens that the objcg pointer
array is the last used object in its slab, that slab may then be freed
which may caused kfree() to be called again.
With the right workload, the slab cache may be set up in a way that allows
the recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system. In fact, we have a reproducer that
can cause kernel stack overflow on a s390 system involving kmalloc-rcl-256
and kmalloc-rcl-128 slabs with the following kfree() loop recursively
called 74 times:
[ 285.520739] [<000000000ec432fc>] kfree+0x4bc/0x560 [ 285.520740]
[<000000000ec43466>] __free_slab+0xc6/0x228 [ 285.520741]
[<000000000ec41fc2>] __slab_free+0x3c2/0x3e0 [ 285.520742]
[<000000000ec432fc>] kfree+0x4bc/0x560 : While investigating this issue, I
also found an issue on the allocation side. If the objcg pointer array
happen to come from the same slab or a circular dependency linkage is
formed with multiple slabs, those affected slabs can never be freed again.
This patch series addresses these two issues by introducing a new set of
kmalloc-cg-<n> caches split from kmalloc-<n> caches. The new set will
only contain non-reclaimable and non-dma objects that are accounted in
memory cgroups whereas the old set are now for unaccounted objects only.
By making this split, all the objcg pointer arrays will come from the
kmalloc-<n> caches, but those caches will never hold any objcg pointer
array. As a result, deeply nested kfree() call and the unfreeable slab
problems are now gone.
This patch (of 4):
Since the merging of the new slab memory controller in v5.9, the page
structure may store a pointer to obj_cgroup pointer array for slab pages.
Currently, only the __GFP_ACCOUNT bit is masked off. However, the array
is not readily reclaimable and doesn't need to come from the DMA buffer.
So those GFP bits should be masked off as well.
Do the flag bit clearing at memcg_alloc_page_obj_cgroups() to make sure
that it is consistently applied no matter where it is called.
Link: https://lkml.kernel.org/r/20210505200610.13943-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-2-longman@redhat.com
Fixes:
|
|
|
Waiman Long
|
559271146e |
mm/memcg: optimize user context object stock access
Most kmem_cache_alloc() calls are from user context. With instrumentation enabled, the measured amount of kmem_cache_alloc() calls from non-task context was about 0.01% of the total. The irq disable/enable sequence used in this case to access content from object stock is slow. To optimize for user context access, there are now two sets of object stocks (in the new obj_stock structure) for task context and interrupt context access respectively. The task context object stock can be accessed after disabling preemption which is cheap in non-preempt kernel. The interrupt context object stock can only be accessed after disabling interrupt. User context code can access interrupt object stock, but not vice versa. The downside of this change is that there are more data stored in local object stocks and not reflected in the charge counter and the vmstat arrays. However, this is a small price to pay for better performance. [longman@redhat.com: fix potential uninitialized variable warning] Link: https://lkml.kernel.org/r/20210526193602.8742-1-longman@redhat.com [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20210506150007.16288-5-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Chris Down <chris@chrisdown.name> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Masayoshi Mizuma <msys.mizuma@gmail.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Waiman Long
|
5387c90490 |
mm/memcg: improve refill_obj_stock() performance
There are two issues with the current refill_obj_stock() code. First of all, when nr_bytes reaches over PAGE_SIZE, it calls drain_obj_stock() to atomically flush out remaining bytes to obj_cgroup, clear cached_objcg and do a obj_cgroup_put(). It is likely that the same obj_cgroup will be used again which leads to another call to drain_obj_stock() and obj_cgroup_get() as well as atomically retrieve the available byte from obj_cgroup. That is costly. Instead, we should just uncharge the excess pages, reduce the stock bytes and be done with it. The drain_obj_stock() function should only be called when obj_cgroup changes. Secondly, when charging an object of size not less than a page in obj_cgroup_charge(), it is possible that the remaining bytes to be refilled to the stock will overflow a page and cause refill_obj_stock() to uncharge 1 page. To avoid the additional uncharge in this case, a new allow_uncharge flag is added to refill_obj_stock() which will be set to false when called from obj_cgroup_charge() so that an uncharge_pages() call won't be issued right after a charge_pages() call unless the objcg changes. A multithreaded kmalloc+kfree microbenchmark on a 2-socket 48-core 96-thread x86-64 system with 96 testing threads were run. Before this patch, the total number of kilo kmalloc+kfree operations done for a 4k large object by all the testing threads per second were 4,304 kops/s (cgroup v1) and 8,478 kops/s (cgroup v2). After applying this patch, the number were 4,731 (cgroup v1) and 418,142 (cgroup v2) respectively. This represents a performance improvement of 1.10X (cgroup v1) and 49.3X (cgroup v2). Link: https://lkml.kernel.org/r/20210506150007.16288-4-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Chris Down <chris@chrisdown.name> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Masayoshi Mizuma <msys.mizuma@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Waiman Long
|
68ac5b3c8d |
mm/memcg: cache vmstat data in percpu memcg_stock_pcp
Before the new slab memory controller with per object byte charging, charging and vmstat data update happen only when new slab pages are allocated or freed. Now they are done with every kmem_cache_alloc() and kmem_cache_free(). This causes additional overhead for workloads that generate a lot of alloc and free calls. The memcg_stock_pcp is used to cache byte charge for a specific obj_cgroup to reduce that overhead. To further reducing it, this patch makes the vmstat data cached in the memcg_stock_pcp structure as well until it accumulates a page size worth of update or when other cached data change. Caching the vmstat data in the per-cpu stock eliminates two writes to non-hot cachelines for memcg specific as well as memcg-lruvecs specific vmstat data by a write to a hot local stock cacheline. On a 2-socket Cascade Lake server with instrumentation enabled and this patch applied, it was found that about 20% (634400 out of 3243830) of the time when mod_objcg_state() is called leads to an actual call to __mod_objcg_state() after initial boot. When doing parallel kernel build, the figure was about 17% (24329265 out of 142512465). So caching the vmstat data reduces the number of calls to __mod_objcg_state() by more than 80%. Link: https://lkml.kernel.org/r/20210506150007.16288-3-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Chris Down <chris@chrisdown.name> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Masayoshi Mizuma <msys.mizuma@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Waiman Long
|
fdbcb2a6d6 |
mm/memcg: move mod_objcg_state() to memcontrol.c
Patch series "mm/memcg: Reduce kmemcache memory accounting overhead", v6.
With the recent introduction of the new slab memory controller, we
eliminate the need for having separate kmemcaches for each memory cgroup
and reduce overall kernel memory usage. However, we also add additional
memory accounting overhead to each call of kmem_cache_alloc() and
kmem_cache_free().
For workloads that require a lot of kmemcache allocations and
de-allocations, they may experience performance regression as illustrated
in [1] and [2].
A simple kernel module that performs repeated loop of 100,000,000
kmem_cache_alloc() and kmem_cache_free() of either a small 32-byte object
or a big 4k object at module init time with a batch size of 4 (4 kmalloc's
followed by 4 kfree's) is used for benchmarking. The benchmarking tool
was run on a kernel based on linux-next-20210419. The test was run on a
CascadeLake server with turbo-boosting disable to reduce run-to-run
variation.
The small object test exercises mainly the object stock charging and
vmstat update code paths. The large object test also exercises the
refill_obj_stock() and __memcg_kmem_charge()/__memcg_kmem_uncharge() code
paths.
With memory accounting disabled, the run time was 3.130s with both small
object big object tests.
With memory accounting enabled, both cgroup v1 and v2 showed similar
results in the small object test. The performance results of the large
object test, however, differed between cgroup v1 and v2.
The execution times with the application of various patches in the
patchset were:
Applied patches Run time Accounting overhead %age 1 %age 2
--------------- -------- ------------------- ------ ------
Small 32-byte object:
None 11.634s 8.504s 100.0% 271.7%
1-2 9.425s 6.295s 74.0% 201.1%
1-3 9.708s 6.578s 77.4% 210.2%
1-4 8.062s 4.932s 58.0% 157.6%
Large 4k object (v2):
None 22.107s 18.977s 100.0% 606.3%
1-2 20.960s 17.830s 94.0% 569.6%
1-3 14.238s 11.108s 58.5% 354.9%
1-4 11.329s 8.199s 43.2% 261.9%
Large 4k object (v1):
None 36.807s 33.677s 100.0% 1075.9%
1-2 36.648s 33.518s 99.5% 1070.9%
1-3 22.345s 19.215s 57.1% 613.9%
1-4 18.662s 15.532s 46.1% 496.2%
N.B. %age 1 = overhead/unpatched overhead
%age 2 = overhead/accounting disabled time
Patch 2 (vmstat data stock caching) helps in both the small object test
and the large v2 object test. It doesn't help much in v1 big object test.
Patch 3 (refill_obj_stock improvement) does help the small object test
but offer significant performance improvement for the large object test
(both v1 and v2).
Patch 4 (eliminating irq disable/enable) helps in all test cases.
To test for the extreme case, a multi-threaded kmalloc/kfree
microbenchmark was run on the 2-socket 48-core 96-thread system with
96 testing threads in the same memcg doing kmalloc+kfree of a 4k object
with accounting enabled for 10s. The total number of kmalloc+kfree done
in kilo operations per second (kops/s) were as follows:
Applied patches v1 kops/s v1 change v2 kops/s v2 change
--------------- --------- --------- --------- ---------
None 3,520 1.00X 6,242 1.00X
1-2 4,304 1.22X 8,478 1.36X
1-3 4,731 1.34X 418,142 66.99X
1-4 4,587 1.30X 438,838 70.30X
With memory accounting disabled, the kmalloc/kfree rate was 1,481,291
kop/s. This test shows how significant the memory accouting overhead
can be in some extreme situations.
For this multithreaded test, the improvement from patch 2 mainly
comes from the conditional atomic xchg of objcg->nr_charged_bytes in
mod_objcg_state(). By using an unconditional xchg, the operation rates
were similar to the unpatched kernel.
Patch 3 elminates the single highly contended cacheline of
objcg->nr_charged_bytes for cgroup v2 leading to a huge performance
improvement. Cgroup v1, however, still has another highly contended
cacheline in the shared page counter &memcg->kmem. So the improvement
is only modest.
Patch 4 helps in cgroup v2, but performs worse in cgroup v1 as
eliminating the irq_disable/irq_enable overhead seems to aggravate the
cacheline contention.
[1] https://lore.kernel.org/linux-mm/20210408193948.vfktg3azh2wrt56t@gabell/T/#u
[2] https://lore.kernel.org/lkml/20210114025151.GA22932@xsang-OptiPlex-9020/
This patch (of 4):
mod_objcg_state() is moved from mm/slab.h to mm/memcontrol.c so that
further optimization can be done to it in later patches without exposing
unnecessary details to other mm components.
Link: https://lkml.kernel.org/r/20210506150007.16288-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210506150007.16288-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Roman Gushchin
|
4d5c8aedc8 |
mm, memcg: introduce mem_cgroup_kmem_disabled()
Introduce a new mem_cgroup_kmem_disabled() helper, similar to mem_cgroup_disabled(), to check whether the kernel memory accounting is off. A user could disable it using a boot option to eliminate some associated costs. The helper can be used outside of memcontrol.c to dynamically disable the kmem-related code. The returned value is stable after the kernel initialization is finished. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> |
|
|
Roman Gushchin
|
0f0cace35f |
mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
cgroup_memory_nosocket, cgroup_memory_nokmem and cgroup_memory_noswap are initialized during the kernel initialization and never change their value afterwards. cgroup_memory_nosocket, cgroup_memory_nokmem are written only from cgroup_memory(), which is marked as __init. cgroup_memory_noswap is written from setup_swap_account() and mem_cgroup_swap_init(), both are marked as __init. Mark all three variables as __ro_after_init. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> |
|
Ingo Molnar
|
f0953a1bba |
mm: fix typos in comments
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yang Shi
|
a178015cde |
mm: memcontrol: reparent nr_deferred when memcg offline
Now shrinker's nr_deferred is per memcg for memcg aware shrinkers, add to parent's corresponding nr_deferred when memcg offline. Link: https://lkml.kernel.org/r/20210311190845.9708-13-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yang Shi
|
e4262c4f51 |
mm: memcontrol: rename shrinker_map to shrinker_info
The following patch is going to add nr_deferred into shrinker_map, the change will make shrinker_map not only include map anymore, so rename it to "memcg_shrinker_info". And this should make the patch adding nr_deferred cleaner and readable and make review easier. Also remove the "memcg_" prefix. Link: https://lkml.kernel.org/r/20210311190845.9708-7-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yang Shi
|
2bfd36374e |
mm: vmscan: consolidate shrinker_maps handling code
The shrinker map management is not purely memcg specific, it is at the intersection between memory cgroup and shrinkers. It's allocation and assignment of a structure, and the only memcg bit is the map is being stored in a memcg structure. So move the shrinker_maps handling code into vmscan.c for tighter integration with shrinker code, and remove the "memcg_" prefix. There is no functional change. Link: https://lkml.kernel.org/r/20210311190845.9708-3-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
f1286fae54 |
mm: memcontrol: inline __memcg_kmem_{un}charge() into obj_cgroup_{un}charge_pages()
There is only one user of __memcg_kmem_charge(), so manually inline __memcg_kmem_charge() to obj_cgroup_charge_pages(). Similarly manually inline __memcg_kmem_uncharge() into obj_cgroup_uncharge_pages() and call obj_cgroup_uncharge_pages() in obj_cgroup_release(). This is just code cleanup without any functionality changes. Link: https://lkml.kernel.org/r/20210319163821.20704-7-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
b4e0b68fbd |
mm: memcontrol: use obj_cgroup APIs to charge kmem pages
Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged via the new APIs of obj_cgroup. The new
APIs introduce a struct obj_cgroup to charge slab objects. It prevents
long-living objects from pinning the original memory cgroup in the
memory. But there are still some corner objects (e.g. allocations
larger than order-1 page on SLUB) which are not charged via the new
APIs. Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.
We want to reuse the obj_cgroup APIs to charge the kmem pages. If we do
that, we should store an object cgroup pointer to page->memcg_data for
the kmem pages.
Finally, page->memcg_data will have 3 different meanings.
1) For the slab pages, page->memcg_data points to an object cgroups
vector.
2) For the kmem pages (exclude the slab pages), page->memcg_data
points to an object cgroup.
3) For the user pages (e.g. the LRU pages), page->memcg_data points
to a memory cgroup.
We do not change the behavior of page_memcg() and page_memcg_rcu(). They
are also suitable for LRU pages and kmem pages. Why?
Because memory allocations pinning memcgs for a long time - it exists at a
larger scale and is causing recurring problems in the real world: page
cache doesn't get reclaimed for a long time, or is used by the second,
third, fourth, ... instance of the same job that was restarted into a new
cgroup every time. Unreclaimable dying cgroups pile up, waste memory, and
make page reclaim very inefficient.
We can convert LRU pages and most other raw memcg pins to the objcg
direction to fix this problem, and then the page->memcg will always point
to an object cgroup pointer. At that time, LRU pages and kmem pages will
be treated the same. The implementation of page_memcg() will remove the
kmem page check.
This patch aims to charge the kmem pages by using the new APIs of
obj_cgroup. Finally, the page->memcg_data of the kmem page points to an
object cgroup. We can use the __page_objcg() to get the object cgroup
associated with a kmem page. Or we can use page_memcg() to get the memory
cgroup associated with a kmem page, but caller must ensure that the
returned memcg won't be released (e.g. acquire the rcu_read_lock or
css_set_lock).
Link: https://lkml.kernel.org/r/20210401030141.37061-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210319163821.20704-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
[songmuchun@bytedance.com: fix forget to obtain the ref to objcg in split_page_memcg]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Muchun Song
|
7ab345a897 |
mm: memcontrol: change ug->dummy_page only if memcg changed
Just like assignment to ug->memcg, we only need to update ug->dummy_page if memcg changed. So move it to there. This is a very small optimization. Link: https://lkml.kernel.org/r/20210319163821.20704-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
e74d225910 |
mm: memcontrol: introduce obj_cgroup_{un}charge_pages
We know that the unit of slab object charging is bytes, the unit of kmem
page charging is PAGE_SIZE. If we want to reuse obj_cgroup APIs to
charge the kmem pages, we should pass PAGE_SIZE (as third parameter) to
obj_cgroup_charge(). Because the size is already PAGE_SIZE, we can skip
touch the objcg stock. And obj_cgroup_{un}charge_pages() are introduced
to charge in units of page level.
In the latter patch, we also can reuse those two helpers to charge or
uncharge a number of kernel pages to a object cgroup. This is just a
code movement without any functional changes.
Link: https://lkml.kernel.org/r/20210319163821.20704-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Muchun Song
|
9f38f03ae8 |
mm: memcontrol: slab: fix obtain a reference to a freeing memcg
Patch series "Use obj_cgroup APIs to charge kmem pages", v5.
Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged with the new APIs of obj_cgroup. The new
APIs introduce a struct obj_cgroup to charge slab objects. It prevents
long-living objects from pinning the original memory cgroup in the
memory. But there are still some corner objects (e.g. allocations
larger than order-1 page on SLUB) which are not charged with the new
APIs. Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.
E.g. We know that the kernel stack is charged as kmem pages because the
size of the kernel stack can be greater than 2 pages (e.g. 16KB on
x86_64 or arm64). If we create a thread (suppose the thread stack is
charged to memory cgroup A) and then move it from memory cgroup A to
memory cgroup B. Because the kernel stack of the thread hold a
reference to the memory cgroup A. The thread can pin the memory cgroup
A in the memory even if we remove the cgroup A. If we want to see this
scenario by using the following script. We can see that the system has
added 500 dying cgroups (This is not a real world issue, just a script
to show that the large kmallocs are charged as kmem pages which can pin
the memory cgroup in the memory).
#!/bin/bash
cat /proc/cgroups | grep memory
cd /sys/fs/cgroup/memory
echo 1 > memory.move_charge_at_immigrate
for i in range{1..500}
do
mkdir kmem_test
echo $$ > kmem_test/cgroup.procs
sleep 3600 &
echo $$ > cgroup.procs
echo `cat kmem_test/cgroup.procs` > cgroup.procs
rmdir kmem_test
done
cat /proc/cgroups | grep memory
This patchset aims to make those kmem pages to drop the reference to
memory cgroup by using the APIs of obj_cgroup. Finally, we can see that
the number of the dying cgroups will not increase if we run the above test
script.
This patch (of 7):
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get (which is in the
refill_stock when cached memcg changed) to memcg.
rcu_read_lock()
memcg = obj_cgroup_memcg(old)
__memcg_kmem_uncharge(memcg)
refill_stock(memcg)
if (stock->cached != memcg)
// css_get can change the ref counter from 0 back to 1.
css_get(&memcg->css)
rcu_read_unlock()
This fix is very like the commit:
|
|
|
Shakeel Butt
|
0add0c77a9 |
memcg: charge before adding to swapcache on swapin
Currently the kernel adds the page, allocated for swapin, to the swapcache before charging the page. This is fine but now we want a per-memcg swapcache stat which is essential for folks who wants to transparently migrate from cgroup v1's memsw to cgroup v2's memory and swap counters. In addition charging a page before exposing it to other parts of the kernel is a step in the right direction. To correctly maintain the per-memcg swapcache stat, this patch has adopted to charge the page before adding it to swapcache. One challenge in this option is the failure case of add_to_swap_cache() on which we need to undo the mem_cgroup_charge(). Specifically undoing mem_cgroup_uncharge_swap() is not simple. To resolve the issue, this patch decouples the charging for swapin pages from mem_cgroup_charge(). Two new functions are introduced, mem_cgroup_swapin_charge_page() for just charging the swapin page and mem_cgroup_swapin_uncharge_swap() for uncharging the swap slot once the page has been successfully added to the swapcache. [shakeelb@google.com: set page->private before calling swap_readpage] Link: https://lkml.kernel.org/r/20210318015959.2986837-1-shakeelb@google.com Link: https://lkml.kernel.org/r/20210305212639.775498-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
2cd21c8980 |
mm: memcontrol: consolidate lruvec stat flushing
There are two functions to flush the per-cpu data of an lruvec into the rest of the cgroup tree: when the cgroup is being freed, and when a CPU disappears during hotplug. The difference is whether all CPUs or just one is being collected, but the rest of the flushing code is the same. Merge them into one function and share the common code. Link: https://lkml.kernel.org/r/20210209163304.77088-8-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
2d146aa3aa |
mm: memcontrol: switch to rstat
Replace the memory controller's custom hierarchical stats code with the generic rstat infrastructure provided by the cgroup core. The current implementation does batched upward propagation from the write side (i.e. as stats change). The per-cpu batches introduce an error, which is multiplied by the number of subgroups in a tree. In systems with many CPUs and sizable cgroup trees, the error can be large enough to confuse users (e.g. 32 batch pages * 32 CPUs * 32 subgroups results in an error of up to 128M per stat item). This can entirely swallow allocation bursts inside a workload that the user is expecting to see reflected in the statistics. In the past, we've done read-side aggregation, where a memory.stat read would have to walk the entire subtree and add up per-cpu counts. This became problematic with lazily-freed cgroups: we could have large subtrees where most cgroups were entirely idle. Hence the switch to change-driven upward propagation. Unfortunately, it needed to trade accuracy for speed due to the write side being so hot. Rstat combines the best of both worlds: from the write side, it cheaply maintains a queue of cgroups that have pending changes, so that the read side can do selective tree aggregation. This way the reported stats will always be precise and recent as can be, while the aggregation can skip over potentially large numbers of idle cgroups. The way rstat works is that it implements a tree for tracking cgroups with pending local changes, as well as a flush function that walks the tree upwards. The controller then drives this by 1) telling rstat when a local cgroup stat changes (e.g. mod_memcg_state) and 2) when a flush is required to get uptodate hierarchy stats for a given subtree (e.g. when memory.stat is read). The controller also provides a flush callback that is called during the rstat flush walk for each cgroup and aggregates its local per-cpu counters and propagates them upwards. This adds a second vmstats to struct mem_cgroup (MEMCG_NR_STAT + NR_VM_EVENT_ITEMS) to track pending subtree deltas during upward aggregation. It removes 3 words from the per-cpu data. It eliminates memcg_exact_page_state(), since memcg_page_state() is now exact. [akpm@linux-foundation.org: merge fix] [hannes@cmpxchg.org: fix a sleep in atomic section problem] Link: https://lkml.kernel.org/r/20210315234100.64307-1-hannes@cmpxchg.org Link: https://lkml.kernel.org/r/20210209163304.77088-7-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
a18e6e6e15 |
mm: memcontrol: privatize memcg_page_state query functions
There are no users outside of the memory controller itself. The rest of the kernel cares either about node or lruvec stats. Link: https://lkml.kernel.org/r/20210209163304.77088-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
a3747b53b1 |
mm: memcontrol: kill mem_cgroup_nodeinfo()
No need to encapsulate a simple struct member access. Link: https://lkml.kernel.org/r/20210209163304.77088-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
a3d4c05a44 |
mm: memcontrol: fix cpuhotplug statistics flushing
Patch series "mm: memcontrol: switch to rstat", v3.
This series converts memcg stats tracking to the streamlined rstat
infrastructure provided by the cgroup core code. rstat is already used by
the CPU controller and the IO controller. This change is motivated by
recent accuracy problems in memcg's custom stats code, as well as the
benefits of sharing common infra with other controllers.
The current memcg implementation does batched tree aggregation on the
write side: local stat changes are cached in per-cpu counters, which are
then propagated upward in batches when a threshold (32 pages) is exceeded.
This is cheap, but the error introduced by the lazy upward propagation
adds up: 32 pages times CPUs times cgroups in the subtree. We've had
complaints from service owners that the stats do not reliably track and
react to allocation behavior as expected, sometimes swallowing the results
of entire test applications.
The original memcg stat implementation used to do tree aggregation
exclusively on the read side: local stats would only ever be tracked in
per-cpu counters, and a memory.stat read would iterate the entire subtree
and sum those counters up. This didn't keep up with the times:
- Cgroup trees are much bigger now. We switched to lazily-freed
cgroups, where deleted groups would hang around until their remaining
page cache has been reclaimed. This can result in large subtrees that
are expensive to walk, while most of the groups are idle and their
statistics don't change much anymore.
- Automated monitoring increased. With the proliferation of userspace
oom killing, proactive reclaim, and higher-resolution logging of
workload trends in general, top-level stat files are polled at least
once a second in many deployments.
- The lifetime of cgroups got shorter. Where most cgroup setups in the
past would have a few large policy-oriented cgroups for everything
running on the system, newer cgroup deployments tend to create one
group per application - which gets deleted again as the processes
exit. An aggregation scheme that doesn't retain child data inside the
parents loses event history of the subtree.
Rstat addresses all three of those concerns through intelligent,
persistent read-side aggregation. As statistics change at the local
level, rstat tracks - on a per-cpu basis - only those parts of a subtree
that have changes pending and require aggregation. The actual
aggregation occurs on the colder read side - which can now skip over
(potentially large) numbers of recently idle cgroups.
===
The test_kmem cgroup selftest is currently failing due to excessive
cumulative vmstat drift from 100 subgroups:
ok 1 test_kmem_basic
memory.current =
|
|
|
Shakeel Butt
|
3d0cbb9816 |
memcg: enable memcg oom-kill for __GFP_NOFAIL
In the era of async memcg oom-killer, the commit |
|
|
Shakeel Butt
|
a47920306c |
memcg: cleanup root memcg checks
Replace the implicit checking of root memcg with explicit root memcg checking i.e. !css->parent with mem_cgroup_is_root(). Link: https://lkml.kernel.org/r/20210223205625.2792891-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
1c824a680b |
mm: page-writeback: simplify memcg handling in test_clear_page_writeback()
Page writeback doesn't hold a page reference, which allows truncate to
free a page the second PageWriteback is cleared. This used to require
special attention in test_clear_page_writeback(), where we had to be
careful not to rely on the unstable page->memcg binding and look up all
the necessary information before clearing the writeback flag.
Since commit
|
|
Zhou Guanghui
|
be6c8982e4 |
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
Rename mem_cgroup_split_huge_fixup to split_page_memcg and explicitly pass in page number argument. In this way, the interface name is more common and can be used by potential users. In addition, the complete info(memcg and flag) of the memcg needs to be set to the tail pages. Link: https://lkml.kernel.org/r/20210304074053.65527-2-zhouguanghui1@huawei.com Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Weilong Chen <chenweilong@huawei.com> Cc: Rui Xiang <rui.xiang@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
1685bde6b9 |
mm: memcontrol: fix get_active_memcg return value
We use a global percpu int_active_memcg variable to store the remote memcg
when we are in the interrupt context. But get_active_memcg always return
the current->active_memcg or root_mem_cgroup. The remote memcg (set in
the interrupt context) is ignored. This is not what we want. So fix it.
Link: https://lkml.kernel.org/r/20210223091101.42150-1-songmuchun@bytedance.com
Fixes:
|
|
|
Muchun Song
|
cae3af62b3 |
mm: memcontrol: fix swap undercounting in cgroup2
When pages are swapped in, the VM may retain the swap copy to avoid repeated writes in the future. It's also retained if shared pages are faulted back in some processes, but not in others. During that time we have an in-memory copy of the page, as well as an on-swap copy. Cgroup1 and cgroup2 handle these overlapping lifetimes slightly differently due to the nature of how they account memory and swap: Cgroup1 has a unified memory+swap counter that tracks a data page regardless whether it's in-core or swapped out. On swapin, we transfer the charge from the swap entry to the newly allocated swapcache page, even though the swap entry might stick around for a while. That's why we have a mem_cgroup_uncharge_swap() call inside mem_cgroup_charge(). Cgroup2 tracks memory and swap as separate, independent resources and thus has split memory and swap counters. On swapin, we charge the newly allocated swapcache page as memory, while the swap slot in turn must remain charged to the swap counter as long as its allocated too. The cgroup2 logic was broken by commit |
|
|
Johannes Weiner
|
6eeb104e11 |
fs: buffer: use raw page_memcg() on locked page
alloc_page_buffers() currently uses get_mem_cgroup_from_page() for charging the buffers to the page owner, which does an rcu-protected page->memcg lookup and acquires a reference. But buffer allocation has the page lock held throughout, which pins the page to the memcg and thereby the memcg - neither rcu nor holding an extra reference during the allocation are necessary. Use a raw page_memcg() instead. This was the last user of get_mem_cgroup_from_page(), delete it. Link: https://lkml.kernel.org/r/20210209190126.97842-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
c41a40b6ba |
mm: memcontrol: replace the loop with a list_for_each_entry()
The rule of list walk has gone since commit
|
|
Yang Li
|
8a260162f9 |
mm/memcontrol: remove redundant NULL check
Fix below warnings reported by coccicheck: mm/memcontrol.c:451:3-9: WARNING: NULL check before some freeing functions is not needed. Link: https://lkml.kernel.org/r/1611216029-34397-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Roman Gushchin
|
c1a660dea3 |
mm: kmem: make __memcg_kmem_(un)charge static
I've noticed that __memcg_kmem_charge() and __memcg_kmem_uncharge() are not used anywhere except memcontrol.c. Yet they are not declared as non-static and are declared in memcontrol.h. This patch makes them static. Link: https://lkml.kernel.org/r/20210108020332.4096911-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
b603894248 |
mm: memcg: add swapcache stat for memcg v2
This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Alex Shi
|
f9b1038ebc |
mm/memcg: remove rcu locking for lock_page_lruvec function series
lock_page_lruvec() and its variants used rcu_read_lock() with the intention of safeguarding against the mem_cgroup being destroyed concurrently; but so long as they are called under the specified conditions (as they are), there is no way for the page's mem_cgroup to be destroyed. Delete the unnecessary rcu_read_lock() and _unlock(). Hugh Dickins polished the commit log. Thanks a lot! Link: https://lkml.kernel.org/r/1608614453-10739-2-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
d7e3aba583 |
mm/memcg: revise the using condition of lock_page_lruvec function series
lock_page_lruvec() and its variants are safe to use under the same conditions as commit_charge(): add lock_page_memcg() to the comment. Polished with Hugh Dickins' suggestions, thanks! Link: https://lkml.kernel.org/r/1608614453-10739-1-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
fff66b79a1 |
mm: memcontrol: make the slab calculation consistent
Although the ratio of the slab is one, we also should read the ratio from
the related memory_stats instead of hard-coding. And the local variable
of size is already the value of slab_unreclaimable. So we do not need to
read again.
To do this we need some code like below:
if (unlikely(memory_stats[i].idx == NR_SLAB_UNRECLAIMABLE_B)) {
- size = memcg_page_state(memcg, NR_SLAB_RECLAIMABLE_B) +
- memcg_page_state(memcg, NR_SLAB_UNRECLAIMABLE_B);
+ VM_BUG_ON(i < 1);
+ VM_BUG_ON(memory_stats[i - 1].idx != NR_SLAB_RECLAIMABLE_B);
+ size += memcg_page_state(memcg, memory_stats[i - 1].idx) *
+ memory_stats[i - 1].ratio;
It requires a series of VM_BUG_ONs or comments to ensure these two items
are actually adjacent and in the right order. So it would probably be
easier to implement this using a wrapper that has a big switch() for unit
conversion.
More details about this discussion can refer to:
https://lore.kernel.org/patchwork/patch/1348611/
This would fix the ratio inconsistency and get rid of the order
guarantee.
Link: https://lkml.kernel.org/r/20201228164110.2838-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Muchun Song
|
57b2847d3c |
mm: memcontrol: convert NR_SHMEM_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with
|
|
|
Muchun Song
|
bf9ecead53 |
mm: memcontrol: convert NR_FILE_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with if hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_THPS account to pages. This patch is consistent
with
|
|
|
Muchun Song
|
69473e5de8 |
mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with
|
|
|
Muchun Song
|
b0ba3bff3e |
mm: memcontrol: fix NR_ANON_THPS accounting in charge moving
Patch series "Convert all THP vmstat counters to pages", v6. This patch series is aimed to convert all THP vmstat counters to pages. The unit of some vmstat counters are pages, some are bytes, some are HPAGE_PMD_NR, and some are KiB. When we want to expose these vmstat counters to the userspace, we have to know the unit of the vmstat counters is which one. When the unit is bytes or kB, both clearly distinguishable by the B/KB suffix. But for the THP vmstat counters, we may make mistakes. For example, the below is some bug fix for the THP vmstat counters: - |
|
|
Muchun Song
|
f3344adf38 |
mm: memcontrol: optimize per-lruvec stats counter memory usage
The vmstat threshold is 32 (MEMCG_CHARGE_BATCH), Actually the threshold can be as big as MEMCG_CHARGE_BATCH * PAGE_SIZE. It still fits into s32. So introduce struct batched_lruvec_stat to optimize memory usage. The size of struct lruvec_stat is 304 bytes on 64 bit systems. As it is a per-cpu structure. So with this patch, we can save 304 / 2 * ncpu bytes per-memcg per-node where ncpu is the number of the possible CPU. If there are c memory cgroup (include dying cgroup) and n NUMA node in the system. Finally, we can save (152 * ncpu * c * n) bytes. [akpm@linux-foundation.org: fix typo in comment] Link: https://lkml.kernel.org/r/20201210042121.39665-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <guro@fb.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Chris Down <chris@chrisdown.name> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Roman Gushchin
|
2e9bd48315 |
mm: memcg/slab: pre-allocate obj_cgroups for slab caches with SLAB_ACCOUNT
In general it's unknown in advance if a slab page will contain accounted objects or not. In order to avoid memory waste, an obj_cgroup vector is allocated dynamically when a need to account of a new object arises. Such approach is memory efficient, but requires an expensive cmpxchg() to set up the memcg/objcgs pointer, because an allocation can race with a different allocation on another cpu. But in some common cases it's known for sure that a slab page will contain accounted objects: if the page belongs to a slab cache with a SLAB_ACCOUNT flag set. It includes such popular objects like vm_area_struct, anon_vma, task_struct, etc. In such cases we can pre-allocate the objcgs vector and simple assign it to the page without any atomic operations, because at this early stage the page is not visible to anyone else. A very simplistic benchmark (allocating 10000000 64-bytes objects in a row) shows ~15% win. In the real life it seems that most workloads are not very sensitive to the speed of (accounted) slab allocations. [guro@fb.com: open-code set_page_objcgs() and add some comments, by Johannes] Link: https://lkml.kernel.org/r/20201113001926.GA2934489@carbon.dhcp.thefacebook.com [akpm@linux-foundation.org: fix it for mm-slub-call-account_slab_page-after-slab-page-initialization-fix.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
7d6beb71da |
idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
|
|
|
Johannes Weiner
|
e82553c10b |
Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
This reverts commit |
|
|
Roman Gushchin
|
3de7d4f25a |
mm: memcg/slab: optimize objcg stock draining
Imran Khan reported a 16% regression in hackbench results caused by the commit |
|
Christian Brauner
|
02f92b3868
|
fs: add file and path permissions helpers
Add two simple helpers to check permissions on a file and path respectively and convert over some callers. It simplifies quite a few codepaths and also reduces the churn in later patches quite a bit. Christoph also correctly points out that this makes codepaths (e.g. ioctls) way easier to follow that would otherwise have to do more complex argument passing than necessary. Link: https://lore.kernel.org/r/20210121131959.646623-4-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
|
Hui Su
|
9a1ac2288c |
mm/memcontrol:rewrite mem_cgroup_page_lruvec()
mem_cgroup_page_lruvec() in memcontrol.c and mem_cgroup_lruvec() in memcontrol.h is very similar except for the param(page and memcg) which also can be convert to each other. So rewrite mem_cgroup_page_lruvec() with mem_cgroup_lruvec(). [alex.shi@linux.alibaba.com: add missed warning in mem_cgroup_lruvec] Link: https://lkml.kernel.org/r/94f17bb7-ec61-5b72-3555-fabeb5a4d73b@linux.alibaba.com [lstoakes@gmail.com: warn on missing memcg on mem_cgroup_page_lruvec()] Link: https://lkml.kernel.org/r/20201125112202.387009-1-lstoakes@gmail.com Link: https://lkml.kernel.org/r/20201108143731.GA74138@rlk Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
a405588862 |
mm/memcg: warning on !memcg after readahead page charged
Add VM_WARN_ON_ONCE_PAGE() macro. Since readahead page is charged on memcg too, in theory we don't have to check this exception now. Before safely remove them all, add a warning for the unexpected !memcg. Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
76358ab547 |
mm/memcg: bail early from swap accounting if memcg disabled
Patch series "bail out early for memcg disable". These 2 patches are indepenedent from per memcg lru lock, and may encounter unexpected warning, so let's move out them from per memcg lru locking patchset. This patch (of 2): We could bail out early when memcg wasn't enabled. Link: https://lkml.kernel.org/r/1604283436-18880-1-git-send-email-alex.shi@linux.alibaba.com Link: https://lkml.kernel.org/r/1604283436-18880-2-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
5b200f5789 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "More MM work: a memcg scalability improvememt" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/lru: revise the comments of lru_lock mm/lru: introduce relock_page_lruvec() mm/lru: replace pgdat lru_lock with lruvec lock mm/swap.c: serialize memcg changes in pagevec_lru_move_fn mm/compaction: do page isolation first in compaction mm/lru: introduce TestClearPageLRU() mm/mlock: remove __munlock_isolate_lru_page() mm/mlock: remove lru_lock on TestClearPageMlocked mm/vmscan: remove lruvec reget in move_pages_to_lru mm/lru: move lock into lru_note_cost mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn mm/memcg: add debug checking in lock_page_memcg mm: page_idle_get_page() does not need lru_lock mm/rmap: stop store reordering issue on page->mapping mm/vmscan: remove unnecessary lruvec adding mm/thp: narrow lru locking mm/thp: simplify lru_add_page_tail() mm/thp: use head for head page in lru_add_page_tail() mm/thp: move lru_add_page_tail() to huge_memory.c |
|
|
Alex Shi
|
6168d0da2b |
mm/lru: replace pgdat lru_lock with lruvec lock
This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
20ad50d678 |
mm/memcg: add debug checking in lock_page_memcg
Add a debug checking in lock_page_memcg, then we could get alarm if anything wrong here. Link: https://lkml.kernel.org/r/1604566549-62481-9-git-send-email-alex.shi@linux.alibaba.com Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
d635a69dd4 |
Networking updates for 5.11
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
|
Shakeel Butt
|
f0c0c115fb |
mm: memcontrol: account pagetables per node
For many workloads, pagetable consumption is significant and it makes sense to expose it in the memory.stat for the memory cgroups. However at the moment, the pagetables are accounted per-zone. Converting them to per-node and using the right interface will correctly account for the memory cgroups as well. [akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/] Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Shakeel Butt
|
c47d5032ed |
mm: move lruvec stats update functions to vmstat.h
Patch series "memcg: add pagetable comsumption to memory.stat", v2. Many workloads consumes significant amount of memory in pagetables. One specific use-case is the user space network driver which mmaps the application memory to provide zero copy transfer. This driver can consume a large amount memory in page tables. This patch series exposes the pagetable comsumption for each memory cgroup. This patch (of 2): This does not change any functionality and only move the functions which update the lruvec stats to vmstat.h from memcontrol.h. The main reason for this patch is to be able to use these functions in the page table contructor function which is defined in mm.h and we can not include the memcontrol.h in that file. Also this is a better place for this interface in general. The lruvec abstraction, while invented for memcg, isn't specific to memcg at all. Link: https://lkml.kernel.org/r/20201130212541.2781790-2-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
7f41506baa |
mm/memcg: remove incorrect comment
Swapcache readahead pages are charged before being used, so it is unlikely that they will be migrated before charging. Remove the incorrect comment. Link: https://lkml.kernel.org/r/1605864930-49405-1-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Kaixu Xia
|
5ab92901fe |
mm: memcontrol: sssign boolean values to a bool variable
Fix the following coccinelle warnings: mm/memcontrol.c:7341:2-22: WARNING: Assignment of 0/1 to bool variable mm/memcontrol.c:7343:2-22: WARNING: Assignment of 0/1 to bool variable Link: https://lkml.kernel.org/r/1604737495-6418-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Acked-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
da3ceeff92 |
mm: memcg/slab: rename *_lruvec_slab_state to *_lruvec_kmem_state
The *_lruvec_slab_state is also suitable for pages allocated from buddy, not just for the slab objects. But the function name seems to tell us that only slab object is applicable. So we can rename the keyword of slab to kmem. Link: https://lkml.kernel.org/r/20201117085249.24319-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Lukas Bulwahn
|
fe6960cb38 |
mm: memcg: remove obsolete memcg_has_children()
Commit 2ef1bf118c40 ("mm: memcg: deprecate the non-hierarchical mode")
removed the only use of memcg_has_children() in
mem_cgroup_hierarchy_write() as part of the feature deprecation.
Hence, since then, make CC=clang W=1 warns:
mm/memcontrol.c:3421:20: warning: unused function 'memcg_has_children' [-Wunused-function]
Simply remove this obsolete unused function.
Link: https://lkml.kernel.org/r/20201116055043.20886-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Roman Gushchin
|
bef8620cd8 |
mm: memcg: deprecate the non-hierarchical mode
Patch series "mm: memcg: deprecate cgroup v1 non-hierarchical mode", v1. The non-hierarchical cgroup v1 mode is a legacy of early days of the memory controller and doesn't bring any value today. However, it complicates the code and creates many edge cases all over the memory controller code. It's a good time to deprecate it completely. This patchset removes the internal logic, adjusts the user interface and updates the documentation. The alt patch removes some bits of the cgroup core code, which become obsolete. Michal Hocko said: "All that we know today is that we have a warning in place to complain loudly when somebody relies on use_hierarchy=0 with a deeper hierarchy. For all those years we have seen _zero_ reports that would describe a sensible usecase. Moreover we (SUSE) have backported this warning into old distribution kernels (since 3.0 based kernels) to extend the coverage and didn't hear even for users who adopt new kernels only very slowly. The only report we have seen so far was a LTP test suite which doesn't really reflect any real life usecase" This patch (of 3): The non-hierarchical cgroup v1 mode is a legacy of early days of the memory controller and doesn't bring any value today. However, it complicates the code and creates many edge cases all over the memory controller code. It's a good time to deprecate it completely. Functionally this patch enabled is by default for all cgroups and forbids switching it off. Nothing changes if cgroup v2 is used: hierarchical mode was enforced from scratch. To protect the ABI memory.use_hierarchy interface is preserved with a limited functionality: reading always returns "1", writing of "1" passes silently, writing of any other value fails with -EINVAL and a warning to dmesg (on the first occasion). Link: https://lkml.kernel.org/r/20201110220800.929549-1-guro@fb.com Link: https://lkml.kernel.org/r/20201110220800.929549-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Roman Gushchin
|
a7cb874bff |
mm: memcg: fix obsolete code comments
This patch fixes/removes some obsolete comments in the code related to the kernel memory accounting: - kmem_cache->memcg_params.memcg_caches has been removed by commit |
|
|
Alex Shi
|
a5eb011afe |
mm/memcg: update page struct member in comments
The page->mem_cgroup member is replaced by memcg_data, and add a helper page_memcg() for it. Need to update comments to avoid confusing. Link: https://lkml.kernel.org/r/1491c150-1cc0-6062-08ea-9c891548a3bc@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Muchun Song
|
eefbfa7fd6 |
mm: memcg/slab: fix use after free in obj_cgroup_charge
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get to memcg.
If the whole process of a cgroup offlining is completed between reading a
objcg->memcg pointer and bumping the css reference on another CPU, and
there are exactly 0 external references to this memory cgroup (how we get
to the obj_cgroup_charge() then?), css_get() can change the ref counter
from 0 back to 1.
Link: https://lkml.kernel.org/r/20201028035013.99711-2-songmuchun@bytedance.com
Fixes:
|