mirror of https://github.com/torvalds/linux.git
198 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
9512433987 |
There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each time the
rate is changed. Previously we wouldn't let clk providers see a rate that was
different if it was still within the range, which could be bad for power if the
clk could run slower when a range expands. Now the clk provider can decide to
do something differently when the constraints change. This broke Nvidia's clk
driver so we had to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk framework
that we're going to extend in the next release. It already made it easy to find
corner cases in the rate range patches so I'm excited to see it cover more clk
code and increase our confidence in core framework patches in the future. I
also added a kunit test for the basic clk gate code and that work will continue
to cover more basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and additions.
Qualcomm again dominates the diffstat here with lots more SoCs being supported
and i.MX follows afer that with a similar number of SoCs gaining clk drivers.
Beyond those large additions there's drivers being modernized to use
clk_parent_data so we can move away from global string names for all the clks
in an SoC. Finally there's lots of little fixes all over the clk drivers for
typos, warnings, and missing clks that aren't critical and get batched up
waiting for the next merge window to open. Nothing super big stands out in the
driver pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks
-----BEGIN PGP SIGNATURE-----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=fP8L
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...
|
|
|
Linus Torvalds
|
dfdc1de642 |
Staging driver update for 5.18-rc1
Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if
there are any legacy userspace applications still using it,
the Android kernel images will maintain it, the community
shouldn't care about it anymore
- wfx wifi driver major cleanups. Should be ready to merge out
of staging soon, and will coordinate with the wifi maintainers
after -rc1 is out
- major cleanups and unwinding of the layers of the r8188eu
driver. It's amazing just how many unneeded layers of
abstraction is in there, just when we think it's done, another
is found...
- lots of tiny coding style cleanups in many other staging
drivers.
There will be merge conflict with a fbtft change and the spi driver
changes in your tree, but it's pretty obvious what to do (the function
shouldn't return anything.)
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG1cA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylndwCfVhxKnbTYKtOs6UEr5pgPCoQCioUAn0Y2i0TG
4aFeeKUyL8VGdAitL+tp
=E6v7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if there are
any legacy userspace applications still using it, the Android
kernel images will maintain it, the community shouldn't care about
it anymore
- wfx wifi driver major cleanups. Should be ready to merge out of
staging soon, and will coordinate with the wifi maintainers after
-rc1 is out
- major cleanups and unwinding of the layers of the r8188eu driver.
It's amazing just how many unneeded layers of abstraction is in
there, just when we think it's done, another is found...
- lots of tiny coding style cleanups in many other staging drivers.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
staging: r8188eu: remove unnecessary memset in r8188eu
staging: greybus: introduce pwm_ops::apply
staging: rts5208: Resolve checkpatch.pl issues.
staging: sm750fb: fix naming style
staging: fbtft: Consider type of init sequence values in fbtft_init_display()
staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
staging: mmal-vchiq: clear redundant item named bulk_scratch
mips: dts: ralink: add MT7621 SoC
staging: r8188eu: remove some unused local ieee80211 macros
staging: r8188eu: make rtl8188e_process_phy_info static
staging: r8188eu: remove unused function prototype
staging: r8188eu: remove three unused receive defines
staging: r8188eu: remove unnecessary initializations
staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
staging: r8188eu: proper error handling in rtw_init_drv_sw
staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
staging: vt6656: Removed unused variable vt3342_vnt_threshold
staging: vt6656: Removed unused variable bb_vga_0
staging: remove ashmem
...
|
|
|
Linus Torvalds
|
02e2af20f4 |
Char/Misc and other driver updates for 5.18-rc1
Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates There will be two merge conflicts with your tree, one in MAINTAINERS which is obvious to fix up, and one in drivers/phy/freescale/Kconfig which also should be easy to resolve. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC R4bgCjfg8BWIBcVVXg3/ =WWXC -----END PGP SIGNATURE----- Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ... |
|
Ansuel Smith
|
887646c47d |
dt-bindings: reset: add ipq8064 ce5 resets
Add ipq8064 ce5 resets needed for CryptoEngine gcc driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-14-ansuelsmth@gmail.com |
|
Robert Marko
|
440c7317e4 |
dt-bindings: reset: Add Delta TN48M
Add header for the Delta TN48M CPLD provided resets. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20220131133049.77780-4-robert.marko@sartura.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
Vidya Sagar
|
d06a171e07 |
dt-bindings: Add Tegra234 PCIe clocks and resets
Add the clocks and resets used by the PCIe hardware found on Tegra234 SoCs. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
Mohan Kumar
|
07d743902a |
dt-bindings: Add HDA support for Tegra234
Add hda clocks, memory ,power and reset binding entries for Tegra234. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
Akhil R
|
38eb21a5fc |
dt-bindings: Add headers for Tegra234 PWM
Add dt-bindings header files for PWM of Tegra234 Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Akhil R
|
bb747becf8 |
dt-bindings: Add headers for Tegra234 I2C
Add dt-bindings header files for I2C controllers for Tegra234 Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
Sergio Paracuellos
|
f383b07706 |
dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
Add dt binding header for resets lines in Mediatek MT7621 SoCs. Acked-by: Rob Herring <robh@kernel.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20220110114930.1406665-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
455e73a07f |
We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support. Per usual (or maybe just recent trends), Qualcomm gains a
handful of SoC drivers additions and has the largest diffstat. After
that there are quite a few updates to the Allwinner (sunxi) drivers to
support modular drivers and Renesas is heavily updated to add more
support for various clks. Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock
drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers
-----BEGIN PGP SIGNATURE-----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=jB+l
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
|
|
Stephen Boyd
|
1d0bd126d9 |
Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into clk-next
- Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations |
|
|
Linus Torvalds
|
bb4ed26e7e |
SoC: Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHE4/wACgkQmmx57+YA GNlSlRAArOIWkgB8Uwf2dz1tdyGNo6b0yqrqPBnc2hlafQVkrd/Cy0imIEt21pJk IkVviuuJmWMS7lFppvjoKbTZDvGt4gcA2o//NorBtSLV5G7mbJAMkeDtfdURRAb0 c7IXbtHaI5qMPHXOzjbKTHedbLJpS2P1uXQtGr9hiZFP8ZfyfbEF1bzL0edcCAWi DuY7cpEHEzeKATN8NQ1ETwpx0MJBfp7pzyfQbB9I1VvIMX1qbuLBUUJ6snLGSiw1 kvLrQoV+2ZISeEfQ8M/PoHpHexO7CzY0thlTFt2mThLVI0ZlaVJvI6oJDAX5AG67 tsmDiBxzvp+gWx5T8TfCgETJOVPUpNpSodF8U+cvIIpZM+DLiDc3Dyu6Zrod5guZ y989Sc+Be1LZEEyy0VscCoDleNxuFohh8aNJZnRtzd5UfJnz7cDIfGUdS2hwP9JN vI7Ci4nQIcvG35RwnLVMOp1azm3RIv2xoESdLkbS9/4smNEjLT1xtr6uVcP+MIKE qsWh8TITRWF4aiFqmsz1JyTHFAL0cCi4lZM//Y6XGKM2z0sCmpbfHIEGhJWuSNme lXvqn62VfiA5CvSnijYMwtRnCKIDDhsjvQo6H0gxCqW6ynCnKAivL/yo65hqtQO8 wBpmlziU7IXx4Js/1eGpF7zq7a9LHFqFnKCrE/+7hK/DPGF2Qck= =X5uk -----END PGP SIGNATURE----- Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option |
|
Nobuhiro Iwamatsu
|
ffa81a0326 |
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
Add device tree bindings for SMU (System Management Unit) controller of Toshiba Visconti TMPV770x SoC series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211025031038.4180686-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
Geert Uytterhoeven
|
810e287e83 |
dt-bindings: reset: Add StarFive JH7100 reset definitions
Add all resets for the StarFive JH7100 reset controller. Based on work by Ahmad Fatoum for Barebox, with "JH7100_" prefixes added to all definitions. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> |
|
Mikko Perttunen
|
fc5e0e3762 |
dt-bindings: Update headers for Tegra234
Add a few more clocks that will be used in follow-up patches to enable more functionality on Tegra234. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
Samuel Holland
|
c962f10f39
|
dt-bindings: clk: Add compatibles for D1 CCUs
The D1 has a CCU and a R_CCU (PRCM CCU) like most other sunxi SoCs, with 3 and 4 clock inputs, respectively. Add the compatibles and bindings. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119043545.4010-2-samuel@sholland.org |
|
|
Linus Torvalds
|
7ddb58cb0e |
The usual collection of clk driver updates and new driver additions. In
terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to use
cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while
changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung Exynos5433
CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmGDLIwRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSWasBAA2TTYnSNm/vaNHYPrKRhv5OgALOX5T8yy
rylvO8qcGrmzX3lVRiO4Bp34jZxQQMG7d2eJn6OMbGEN+9GcsZGA3p4zA8wZaXkN
yAnddCUEyFl2zMrikXLijhjJ87bmsKUaHHN+zGrGAxC9/VBMwDUPjp9Gy4kdmUFj
0fq2yhWULulm7UgDTLzwow22wCYYx9/SaNbhnDj7s/eV5N2oexXOrwfIlDHtXnMZ
4zbJtZ4GKmdicUUMIVzO7wrdEHcWgbPrY2S8UuUbM5PPMzsX7OZ4k/w94p18iT40
kaJnvEgwZomsYkBMMTrxRjlI/AU3r9omyquKEPX2UXUsTqGHOXZqFXVDPS/6tnvU
+sqP1V59NMmN9t3HomZ+gr+VKyjakYXuz7QlZZ5kuZRM0aWDfCaq8UEAjyU1WQ+J
NI4BKzok7+JqEZ25MjcpEV6UBrzNnJ3SMGGiiEUxL6Fl4BE9anVUn06E16v3b5Vb
k36eosnT3gCBvhNI6gV5zIUyavwb4ga4QJyRQJBeHE7qSVegeoauS8qTFvV04tud
fWZwAqdLUU/fVse8iuolciZBMAkiuI/R0N8/rZ3MHLe3VB0D/Q/XWGcIheyVpALK
KAWQ/OA96mM9qf1VBkeItdciSQ+rwAcivmcJTvVIUiwlNk36CYzRsja+sgcNphPH
WV1CLOIrOgQ=
=Is+O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
|
|
|
Stephen Boyd
|
8d741ecd46 |
Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-next
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get() |
|
Linus Walleij
|
f2b883bbdd |
dt-bindings: clock: u8500: Rewrite in YAML and extend
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
Enric Balletbo i Serra
|
4bdb00edbd |
arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
Reset the DSI hardware is needed to prevent different settings between the bootloader and the kernel. While here, also remove the undocumented and also not used 'mediatek,syscon-dsi' property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210930103105.v4.5.I933f1532d7a1b2910843a9644c86a7d94a4b44e1@changeid Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
|
Enric Balletbo i Serra
|
7fdb1bc3d9 |
arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
Reset the DSI hardware is needed to prevent different settings between the bootloader and the kernel. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210930103105.v4.4.I7bd7d9a8da5e2894711b700a1127e6902a2b2f1d@changeid Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
|
Enric Balletbo i Serra
|
f07c776f6d |
arm64: dts: mediatek: Move reset controller constants into common location
The DT binding includes for reset controllers are located in include/dt-bindings/reset/. Move the Mediatek reset constants in there. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20210930103105.v4.1.I514d9aafff3a062f751b37d3fea7402f67595b86@changeid Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
Jacky Bai
|
d48f12d9ae |
dt-bindings: clock: Add imx8ulp clock support
Add the clock dt-binding file for i.MX8ULP. For pcc node, it will also be used as a reset controller, so add the '#reset-cells' property description and add the pcc reset IDs. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-2-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> |
|
|
Linus Torvalds
|
4c00e1e2e5 |
linux-watchdog 5.15-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmE3t2UACgkQ+iyteGJfRspKrgCfVDZuMeFiDrRjPz9FMDUncIZ7 /24AoKWWPcOJLNXXNCwwD61kcW34LzVV =gMcs -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Mediatek MT7986 & MT8195 wdt support - add Maxim MAX63xx - drop bd70528 support - rewrite ixp4xx to watchdog framework - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and tqmx86 - introduce watchdog_dev_suspend/resume - several fixes and improvements * tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add compatible for Mediatek MT7986 watchdog: ixp4xx: Rewrite driver to use core watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate watchdog: max63xx_wdt: Add device tree probing dt-bindings: watchdog: Add Maxim MAX63xx bindings watchdog: mediatek: mt8195: add wdt support dt-bindings: reset: mt8195: add toprgu reset-controller header file watchdog: tqmx86: Constify static struct watchdog_ops watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops watchdog: sl28cpld_wdt: Constify static struct watchdog_ops watchdog: iTCO_wdt: Fix detection of SMI-off case watchdog: bcm2835_wdt: consider system-power-controller property watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend watchdog: introduce watchdog_dev_suspend/resume watchdog: Fix NULL pointer dereference when releasing cdev watchdog: only run driver set_pretimeout op if device supports it watchdog: bd70528 drop bd70528 support |
|
Christine Zhu
|
39c5b2f6f2 |
dt-bindings: reset: mt8195: add toprgu reset-controller header file
Add toprgu reset-controller header file for MT8195 platform. Signed-off-by: Christine Zhu <Christine.Zhu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210726122901.12195-3-Christine.Zhu@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
|
Sibi Sankar
|
9e3b594a92 |
dt-bindings: reset: pdc: Add PDC Global bindings
Add PDC Global reset controller bindings for SC7280 SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1619693465-5724-4-git-send-email-sibis@codeaurora.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
Gabriel Fernandez
|
f040e135c5 |
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
Add ID to SCMI0 to exposes reset controller for the MCU HOLD BOOT resource. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210617051814.12018-10-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Gabriel Fernandez
|
256c7521cb |
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
stm32mp15 TZ secure firmware provides SCMI reset domains for secure resources. This change defines the SCMI reset domain identifiers used by SCMI agents and servers. Stm32mp15 TZ secure firmware provides SCMI clocks for oscillators, some PLL output and few secure aware interfaces. This change defines the SCMI clock identifiers used by SCMI agents and servers. Server SCMI0 exposes reset controllers for resources under RCC[TZEN] configuration control. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210617051814.12018-9-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
8b83369ddc |
RISC-V Patches for the 5.12 Merge Window
I have a handful of new RISC-V related patches for this merge window:
* A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may catch
errors in new drivers.
* Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
* NUMA support for RISC-V, which involves making the arm64 code generic.
* Support for kasan on the vmalloc region.
* A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
* Support for allocating ASIDs.
* Preliminary support for kernels larger than 128MiB.
* Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
-----BEGIN PGP SIGNATURE-----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=CutX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
|
|
Andre Przywara
|
88dde5e23d
|
clk: sunxi-ng: Add support for the Allwinner H616 CCU
While the clocks are fairly similar to the H6, many differ in tiny details, so a separate clock driver seems indicated. Derived from the H6 clock driver, and adjusted according to the manual. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210127172500.13356-4-andre.przywara@arm.com |
|
Damien Le Moal
|
1d7c9d093e
|
dt-bindings: reset: Document canaan,k210-rst bindings
Document the device tree bindings for the Canaan Kendryte K210 SoC reset controller driver in Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml. The header file include/dt-bindings/reset/k210-rst.h is added to define all possible reset lines of the SoC. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
|
|
Samuel Holland
|
0482a4e6de |
clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
While no information about the H6 RSB controller is included in the datasheet or manual, the vendor BSP and power management blob both reference the RSB clock parent and register address. These values were verified by experimentation. Since this clock/reset are added late, the specifier is added at the end to maintain the existing DT binding. The code is kept in register order. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
|
Álvaro Fernández Rojas
|
8c9e8b0a28 |
mips: bmips: add BCM6318 reset controller definitions
BCM6318 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <F.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Álvaro Fernández Rojas
|
b7aa228813 |
mips: bmips: dts: add BCM63268 reset controller support
BCM63268 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Álvaro Fernández Rojas
|
7acf84e878 |
mips: bmips: dts: add BCM6368 reset controller support
BCM6368 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Álvaro Fernández Rojas
|
226383600b |
mips: bmips: dts: add BCM6362 reset controller support
BCM6362 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Álvaro Fernández Rojas
|
8079cfba4c |
mips: bmips: dts: add BCM6358 reset controller support
BCM6358 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Álvaro Fernández Rojas
|
83f865d7e3 |
mips: bmips: dts: add BCM6328 reset controller support
BCM6328 SoCs have a reset controller for certain components. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
|
|
Linus Torvalds
|
e533cda12d |
ARM: Devicetree updates
As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TVacPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx37MMP/imMO5e0QY1/7xxXWm4Kgc/Uffqw2Dvhj74a 4Nrudwz6oUFGpZzIFYxqeCeWwotjA0nXmvM4Nl/SbxtlbV6nY/JrOL1OJToaGY0z Oc1jdA0MdXITdi6Xl5PTRqDeIHTSUmTclZWi5gvT7LFEvHog3mquJ7PiNTrjyuV0 9BmHipwfmH6V5gDJZvN2dDlkhy0cpQKJFw7ylKCL89UNiEAd2QtNG0d0RLdz7yPX IGdecFelOhG9MSZyuFYYB2HOI33ukjZ9dA+yFy7BWOqegf/Z5hI02mxpke7Sys/5 4XEN7ksSSYr6sm3h9XNW++IYkapZ9y/ZW+sQdiBZ3GMOwMXj02TdRkpC7f+FgAPo Hl7yXodGmXynL6ULu7/lIbBvqfWkLcwfVCYZx6PoWRE2q5g5ifoYp9b8kI5cLXrb BJn85XIuIaoO0cgrq7EzZnksaiwY1CNL84mYgkKRCGbBoJKHRiU+8Ilm5SKzk3kq KJ0gmbwFMjvTYxs3g6LPCo0jUNLjmLQMr0tL7iHDWkk5uqA+gfjKSLQfPby3jrMr 6RDZBzMB+tPz1e++RWo41XD/Mm2kw8MGstsCOLzk2TdLh7e3fPfU4g7m0aqs/Q1y +LCqshffF/XVzV2uTFHDUGWufIM9nY6rdzuBc+JACJ5E+QyDg1tGKtMB3TYqgdN2 aRY3NLSv =xjfB -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ... |
|
|
Linus Torvalds
|
2e368dd2bb |
ARM: SoC-related driver updates
Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms. -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+ /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2 5u/aVH3y =tfPb -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ... |
|
|
Linus Torvalds
|
3fec0eaaf0 |
This pull request contains zero diff to the core framework. It is a collection
of various clk driver updates. The biggest driver updates in terms of lines of
code is the Allwinner driver, closely followed by the Qualcomm and Mediatek
drivers. All of those hit high because we add so many lines of clk data. Coming
in fourth place is i.MX which also adds a bunch of clk data. This accounts for
the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for various clk
drivers that have baked in linux-next for a while. I suppose one highlight or
theme is that more clk drivers are being updated to work as modules, which is
interesting to see such critical SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory
-----BEGIN PGP SIGNATURE-----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=sKI8
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
|
|
Peng Fan
|
cbc111d155 |
dt-bindings: reset: imx8mq: add m4 reset
Add the m4 reset used by the remoteproc driver Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
Sai Krishna Potthuri
|
a297104ace |
dt-bindings: reset: Updated binding for Versal reset driver
Added documentation and Versal reset indices to describe about Versal reset driver bindings. In Versal all reset indices includes Class, SubClass, Type, Index information whereas class refers to clock, reset, power etc., Underlying firmware in Versal have such classification and expects the ID to be this way. [13:0] - Index bits [19:14] - Type bits [25:20] - SubClass bits [31:26] - Class bits. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
Thierry Reding
|
639448912b |
arm64: tegra: Initial Tegra234 VDK support
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It supports a subset of the peripherals that will be available in the final chip and serves as a bootstrapping platform. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
Yangtao Li
|
fb038ce4db
|
clk: sunxi-ng: add support for the Allwinner A100 CCU
Add support for a100 in the sunxi-ng CCU framework. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com |
|
Nicolas Saenz Julienne
|
242841992a |
dt-bindings: reset: Add a binding for the RPi Firmware reset controller
The firmware running on the RPi VideoCore can be used to reset and initialize HW controlled by the firmware. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-2-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
05a5b5d8a2 |
Here's some more updates that missed the last pull request because I
happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl80J28RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVEkRAArVaHkGME9FLC2eOtfh5JSBAITIyvUxXh 6+DVGxt29Rfp24/IL7P05DfDtw402qDnkfeeF7dljgSqS9BimsF5DP2EnLec9j6y EZqZzThMyuS6+UyZ/QSyzpDITqemA9dOccmtve3QPOkgn6BZcfUJGqwIk47Dd/wA udOZCPm+HR4d7H8nzhsfDBIOCPueOV/zDVKPWNSDuuRVLKHOW7OPUvTNo5ZBrOBj 3w6Q3KqHBNVHfrl9b5MdPSEatlTU3hlmm2bskTyVpwMAHKq6H0M0jqCh03jVNRr7 woUtgRzo5KEfM52pZGQTO6U9ifIv4nKv9lIhrZAR4ql3tXGag6hQ3YMahd0sjyUc poJ13JqgLmwTw4B4mbxTS8yW86tlEBXcTc33sT22jt2TrSc5zimoavBzn7NNdzv/ AnPUyAXPJLKFQ2Rx2DNnZ87hSimpPz64MszFcuD2XZpsmohFTretyCUvjaiwQqrL 37Yt/NPo2NVx3yM6BDBs1oXFNMzYrEHpnOEKMfF4JYFHQO8bo5QCwqgiZX8sf1l2 7mQSeae7tDtrWysbJ6L+rSzOcyqCsOoWcM3H2/ydyDgSE4tA+2lU0/AD9jIs8D0U fXHRWJ4eCzGJ8hcdUUhYCMjrsQuerze4neNjYYAZRGbs8PhBKMAVbTl/TAay9rLV QesIjVqhN1o= =/8EM -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ... |
|
Cristian Ciocaltea
|
fac1d443a2 |
dt-bindings: reset: Add binding constants for Actions S500 RMU
Add device tree binding constants for Actions Semi S500 SoC Reset Management Unit (RMU). Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/daf615160b3be9f38dcf7926cc82128c9c2d73e3.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
Alexander A. Klimov
|
ffebbecaaa |
reset: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|