mirror of https://github.com/torvalds/linux.git
6439 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Pablo Neira Ayuso
|
23185c6aed |
netfilter: nft_dynset: disallow object maps
Do not allow to insert elements from datapath to objects maps.
Fixes:
|
|
|
Pablo Neira Ayuso
|
02c6c24402 |
netfilter: nf_tables: GC transaction race with netns dismantle
Use maybe_get_net() since GC workqueue might race with netns exit path.
Fixes:
|
|
|
Pablo Neira Ayuso
|
6a33d8b73d |
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
Netlink event path is missing a synchronization point with GC
transactions. Add GC sequence number update to netns release path and
netlink event path, any GC transaction losing race will be discarded.
Fixes:
|
|
Sishuai Gong
|
5310760af1 |
ipvs: fix racy memcpy in proc_do_sync_threshold
When two threads run proc_do_sync_threshold() in parallel,
data races could happen between the two memcpy():
Thread-1 Thread-2
memcpy(val, valp, sizeof(val));
memcpy(valp, val, sizeof(val));
This race might mess up the (struct ctl_table *) table->data,
so we add a mutex lock to serialize them.
Fixes:
|
|
Xin Long
|
9bfab6d23a |
netfilter: set default timeout to 3 secs for sctp shutdown send and recv state
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes:
|
|
Florian Westphal
|
7845914f45 |
netfilter: nf_tables: don't fail inserts if duplicate has expired
nftables selftests fail:
run-tests.sh testcases/sets/0044interval_overlap_0
Expected: 0-2 . 0-3, got:
W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1
Insertion must ignore duplicate but expired entries.
Moreover, there is a strange asymmetry in nft_pipapo_activate:
It refetches the current element, whereas the other ->activate callbacks
(bitmap, hash, rhash, rbtree) use elem->priv.
Same for .remove: other set implementations take elem->priv,
nft_pipapo_remove fetches elem->priv, then does a relookup,
remove this.
I suspect this was the reason for the change that prompted the
removal of the expired check in pipapo_get() in the first place,
but skipping exired elements there makes no sense to me, this helper
is used for normal get requests, insertions (duplicate check)
and deactivate callback.
In first two cases expired elements must be skipped.
For ->deactivate(), this gets called for DELSETELEM, so it
seems to me that expired elements should be skipped as well, i.e.
delete request should fail with -ENOENT error.
Fixes:
|
|
|
Florian Westphal
|
90e5b3462e |
netfilter: nf_tables: deactivate catchall elements in next generation
When flushing, individual set elements are disabled in the next
generation via the ->flush callback.
Catchall elements are not disabled. This is incorrect and may lead to
double-deactivations of catchall elements which then results in memory
leaks:
WARNING: CPU: 1 PID: 3300 at include/net/netfilter/nf_tables.h:1172 nft_map_deactivate+0x549/0x730
CPU: 1 PID: 3300 Comm: nft Not tainted 6.5.0-rc5+ #60
RIP: 0010:nft_map_deactivate+0x549/0x730
[..]
? nft_map_deactivate+0x549/0x730
nf_tables_delset+0xb66/0xeb0
(the warn is due to nft_use_dec() detecting underflow).
Fixes:
|
|
|
Florian Westphal
|
08713cb006 |
netfilter: nf_tables: fix kdoc warnings after gc rework
Jakub Kicinski says: We've got some new kdoc warnings here: net/netfilter/nft_set_pipapo.c:1557: warning: Function parameter or member '_set' not described in 'pipapo_gc' net/netfilter/nft_set_pipapo.c:1557: warning: Excess function parameter 'set' description in 'pipapo_gc' include/net/netfilter/nf_tables.h:577: warning: Function parameter or member 'dead' not described in 'nft_set' Fixes: |
|
|
Florian Westphal
|
b9f052dc68 |
netfilter: nf_tables: fix false-positive lockdep splat
->abort invocation may cause splat on debug kernels:
WARNING: suspicious RCU usage
net/netfilter/nft_set_pipapo.c:1697 suspicious rcu_dereference_check() usage!
[..]
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/133554: [..] (nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
[..]
lockdep_rcu_suspicious+0x1ad/0x260
nft_pipapo_abort+0x145/0x180
__nf_tables_abort+0x5359/0x63d0
nf_tables_abort+0x24/0x40
nfnetlink_rcv+0x1a0a/0x22c0
netlink_unicast+0x73c/0x900
netlink_sendmsg+0x7f0/0xc20
____sys_sendmsg+0x48d/0x760
Transaction mutex is held, so parallel updates are not possible.
Switch to _protected and check mutex is held for lockdep enabled builds.
Fixes:
|
|
|
Pablo Neira Ayuso
|
a2dd0233cb |
netfilter: nf_tables: remove busy mark and gc batch API
Ditch it, it has been replace it by the GC transaction API and it has no clients anymore. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Pablo Neira Ayuso
|
c92db30304 |
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes:
|
|
|
Pablo Neira Ayuso
|
f6c383b8c3 |
netfilter: nf_tables: adapt set backend to use GC transaction API
Use the GC transaction API to replace the old and buggy gc API and the busy mark approach. No set elements are removed from async garbage collection anymore, instead the _DEAD bit is set on so the set element is not visible from lookup path anymore. Async GC enqueues transaction work that might be aborted and retried later. rbtree and pipapo set backends does not set on the _DEAD bit from the sync GC path since this runs in control plane path where mutex is held. In this case, set elements are deactivated, removed and then released via RCU callback, sync GC never fails. Fixes: |
|
|
Pablo Neira Ayuso
|
5f68718b34 |
netfilter: nf_tables: GC transaction API to avoid race with control plane
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes:
|
|
|
Florian Westphal
|
24138933b9 |
netfilter: nf_tables: don't skip expired elements during walk
There is an asymmetry between commit/abort and preparation phase if the
following conditions are met:
1. set is a verdict map ("1.2.3.4 : jump foo")
2. timeouts are enabled
In this case, following sequence is problematic:
1. element E in set S refers to chain C
2. userspace requests removal of set S
3. kernel does a set walk to decrement chain->use count for all elements
from preparation phase
4. kernel does another set walk to remove elements from the commit phase
(or another walk to do a chain->use increment for all elements from
abort phase)
If E has already expired in 1), it will be ignored during list walk, so its use count
won't have been changed.
Then, when set is culled, ->destroy callback will zap the element via
nf_tables_set_elem_destroy(), but this function is only safe for
elements that have been deactivated earlier from the preparation phase:
lack of earlier deactivate removes the element but leaks the chain use
count, which results in a WARN splat when the chain gets removed later,
plus a leak of the nft_chain structure.
Update pipapo_get() not to skip expired elements, otherwise flush
command reports bogus ENOENT errors.
Fixes:
|
|
Eric Dumazet
|
3c5b4d69c3 |
net: annotate data-races around sk->sk_mark
sk->sk_mark is often read while another thread could change the value.
Fixes:
|
|
|
Pablo Neira Ayuso
|
0ebc1064e4 |
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
Bail out with EOPNOTSUPP when adding rule to bound chain via
NFTA_RULE_CHAIN_ID. The following warning splat is shown when
adding a rule to a deleted bound chain:
WARNING: CPU: 2 PID: 13692 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
CPU: 2 PID: 13692 Comm: chain-bound-rul Not tainted 6.1.39 #1
RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
Fixes:
|
|
|
Pablo Neira Ayuso
|
0a771f7b26 |
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
On error when building the rule, the immediate expression unbinds the
chain, hence objects can be deactivated by the transaction records.
Otherwise, it is possible to trigger the following warning:
WARNING: CPU: 3 PID: 915 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
CPU: 3 PID: 915 Comm: chain-bind-err- Not tainted 6.1.39 #1
RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
Fixes:
|
|
|
Florian Westphal
|
f718863aca |
netfilter: nft_set_rbtree: fix overlap expiration walk
The lazy gc on insert that should remove timed-out entries fails to release
the other half of the interval, if any.
Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0
in nftables.git and kmemleak enabled kernel.
Second bug is the use of rbe_prev vs. prev pointer.
If rbe_prev() returns NULL after at least one iteration, rbe_prev points
to element that is not an end interval, hence it should not be removed.
Lastly, check the genmask of the end interval if this is active in the
current generation.
Fixes:
|
|
|
Pablo Neira Ayuso
|
6eaf41e87a |
netfilter: nf_tables: skip bound chain on rule flush
Skip bound chain when flushing table rules, the rule that owns this
chain releases these objects.
Otherwise, the following warning is triggered:
WARNING: CPU: 2 PID: 1217 at net/netfilter/nf_tables_api.c:2013 nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
CPU: 2 PID: 1217 Comm: chain-flush Not tainted 6.1.39 #1
RIP: 0010:nf_tables_chain_destroy+0x1f7/0x210 [nf_tables]
Fixes:
|
|
|
Pablo Neira Ayuso
|
751d460ccf |
netfilter: nf_tables: skip bound chain in netns release path
Skip bound chain from netns release path, the rule that owns this chain
releases these objects.
Fixes:
|
|
|
Florian Westphal
|
87b5a5c209 |
netfilter: nft_set_pipapo: fix improper element removal
end key should be equal to start unless NFT_SET_EXT_KEY_END is present.
Its possible to add elements that only have a start key
("{ 1.0.0.0 . 2.0.0.0 }") without an internval end.
Insertion treats this via:
if (nft_set_ext_exists(ext, NFT_SET_EXT_KEY_END))
end = (const u8 *)nft_set_ext_key_end(ext)->data;
else
end = start;
but removal side always uses nft_set_ext_key_end().
This is wrong and leads to garbage remaining in the set after removal
next lookup/insert attempt will give:
BUG: KASAN: slab-use-after-free in pipapo_get+0x8eb/0xb90
Read of size 1 at addr ffff888100d50586 by task nft-pipapo_uaf_/1399
Call Trace:
kasan_report+0x105/0x140
pipapo_get+0x8eb/0xb90
nft_pipapo_insert+0x1dc/0x1710
nf_tables_newsetelem+0x31f5/0x4e00
..
Fixes:
|
|
|
Florian Westphal
|
314c828416 |
netfilter: nf_tables: can't schedule in nft_chain_validate
Can be called via nft set element list iteration, which may acquire
rcu and/or bh read lock (depends on set type).
BUG: sleeping function called from invalid context at net/netfilter/nf_tables_api.c:3353
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1232, name: nft
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by nft/1232:
#0: ffff8881180e3ea8 (&nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
#1: ffffffff83f5f540 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire
Call Trace:
nft_chain_validate
nft_lookup_validate_setelem
nft_pipapo_walk
nft_lookup_validate
nft_chain_validate
nft_immediate_validate
nft_chain_validate
nf_tables_validate
nf_tables_abort
No choice but to move it to nf_tables_validate().
Fixes:
|
|
|
Florian Westphal
|
ddbd8be689 |
netfilter: nf_tables: fix spurious set element insertion failure
On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.
On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one. The data equality check uses memcmp.
For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.
This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.
Fixes:
|
|
Paolo Abeni
|
ceb20a3cc5 |
netfilter pull request 23-07-06
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmSl9YgACgkQ1V2XiooU IOQ4nw//f0ASAgbKUEBQTUPwVvG/wngMy99cfyxwkvWjZJ8dbgh0SBq0vK+fc06Q 9+xixns7i+jIbaMNhgo80SWbdXSNhsAOHoB25F+jv5FkhKPyLWa/HcvjJK2WCs/8 ri05VJ59sWVlgewxn2WFO9NXyrS3vWfgUYKp0Z0R4v7+8NnfV4pRP3UuvIyYGL6r 4A1J7ZfDRa/391cE4uUVv8a4rgcb1CvfEpZaltnRcSZQbBKru5ysjCSnlqELJ/3F sPxAuTN+LAviJf9U/g7PfmLZ8U/YPRZ1bEanwDnO8hk3bMkGjWBm/NIUpBvu/bh6 T7gzIkH0wImerogl2rpIomqt4LgUusyj4FWBePw1BC9zYTuDXXriSzYkQgiI7Vd6 8XVWzYpFtdF9Is3SOEFxkGgu1ZkS3bkD3zTAuaGFNxfIjakUsxLZhez0BocYs97S l9s8x1vwQtJyGtC8PgAcLsqMlYXJZ7ur8LP9st76Ghtc88OYJUMchUI/S8gShWWi tv/xUx8erV2v9abW588LKz1LzUd4lMPR0GXlCLfOOKzT8gjsjHtQbc/1JTAD3s5F HojjAXTC6VccfMrno8EPMx5uFIZV7Kvpw34R/7yRzu6ewm9Myib+bvmcdm5Wu3V+ j8YyO/9eqOPKKMxHeXUg8WCy20RFxH4MdxpR9kJ2VOqSFHsqLmo= =c4IW -----END PGP SIGNATURE----- Merge tag 'nf-23-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix missing overflow use refcount checks in nf_tables. 2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker, from Florian Westphal. 3) Bail out if nf_ct_helper_hash is NULL before registering helper, from Florent Revest. 4) Use siphash() instead siphash_4u64() to fix performance regression, also from Florian. 5) Do not allow to add rules to removed chains via ID, from Thadeu Lima de Souza Cascardo. 6) Fix oob read access in byteorder expression, also from Thadeu. netfilter pull request 23-07-06 ==================== Link: https://lore.kernel.org/r/20230705230406.52201-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
|
Thadeu Lima de Souza Cascardo
|
caf3ef7468 |
netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
When evaluating byteorder expressions with size 2, a union with 32-bit and
16-bit members is used. Since the 16-bit members are aligned to 32-bit,
the array accesses will be out-of-bounds.
It may lead to a stack-out-of-bounds access like the one below:
[ 23.095215] ==================================================================
[ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320
[ 23.096020] Read of size 2 at addr ffffc90000007948 by task ping/115
[ 23.096358]
[ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413
[ 23.096770] Call Trace:
[ 23.096910] <IRQ>
[ 23.097030] dump_stack_lvl+0x60/0xc0
[ 23.097218] print_report+0xcf/0x630
[ 23.097388] ? nft_byteorder_eval+0x13c/0x320
[ 23.097577] ? kasan_addr_to_slab+0xd/0xc0
[ 23.097760] ? nft_byteorder_eval+0x13c/0x320
[ 23.097949] kasan_report+0xc9/0x110
[ 23.098106] ? nft_byteorder_eval+0x13c/0x320
[ 23.098298] __asan_load2+0x83/0xd0
[ 23.098453] nft_byteorder_eval+0x13c/0x320
[ 23.098659] nft_do_chain+0x1c8/0xc50
[ 23.098852] ? __pfx_nft_do_chain+0x10/0x10
[ 23.099078] ? __kasan_check_read+0x11/0x20
[ 23.099295] ? __pfx___lock_acquire+0x10/0x10
[ 23.099535] ? __pfx___lock_acquire+0x10/0x10
[ 23.099745] ? __kasan_check_read+0x11/0x20
[ 23.099929] nft_do_chain_ipv4+0xfe/0x140
[ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10
[ 23.100327] ? lock_release+0x204/0x400
[ 23.100515] ? nf_hook.constprop.0+0x340/0x550
[ 23.100779] nf_hook_slow+0x6c/0x100
[ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10
[ 23.101223] nf_hook.constprop.0+0x334/0x550
[ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10
[ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10
[ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 23.102291] ? rcu_read_lock_held+0x4b/0x70
[ 23.102481] ip_local_deliver+0xbb/0x110
[ 23.102665] ? __pfx_ip_rcv+0x10/0x10
[ 23.102839] ip_rcv+0x199/0x2a0
[ 23.102980] ? __pfx_ip_rcv+0x10/0x10
[ 23.103140] __netif_receive_skb_one_core+0x13e/0x150
[ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 23.103647] ? mark_held_locks+0x48/0xa0
[ 23.103819] ? process_backlog+0x36c/0x380
[ 23.103999] __netif_receive_skb+0x23/0xc0
[ 23.104179] process_backlog+0x91/0x380
[ 23.104350] __napi_poll.constprop.0+0x66/0x360
[ 23.104589] ? net_rx_action+0x1cb/0x610
[ 23.104811] net_rx_action+0x33e/0x610
[ 23.105024] ? _raw_spin_unlock+0x23/0x50
[ 23.105257] ? __pfx_net_rx_action+0x10/0x10
[ 23.105485] ? mark_held_locks+0x48/0xa0
[ 23.105741] __do_softirq+0xfa/0x5ab
[ 23.105956] ? __dev_queue_xmit+0x765/0x1c00
[ 23.106193] do_softirq.part.0+0x49/0xc0
[ 23.106423] </IRQ>
[ 23.106547] <TASK>
[ 23.106670] __local_bh_enable_ip+0xf5/0x120
[ 23.106903] __dev_queue_xmit+0x789/0x1c00
[ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10
[ 23.107381] ? find_held_lock+0x8e/0xb0
[ 23.107585] ? lock_release+0x204/0x400
[ 23.107798] ? neigh_resolve_output+0x185/0x350
[ 23.108049] ? mark_held_locks+0x48/0xa0
[ 23.108265] ? neigh_resolve_output+0x185/0x350
[ 23.108514] neigh_resolve_output+0x246/0x350
[ 23.108753] ? neigh_resolve_output+0x246/0x350
[ 23.109003] ip_finish_output2+0x3c3/0x10b0
[ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10
[ 23.109510] ? __pfx_nf_hook+0x10/0x10
[ 23.109732] __ip_finish_output+0x217/0x390
[ 23.109978] ip_finish_output+0x2f/0x130
[ 23.110207] ip_output+0xc9/0x170
[ 23.110404] ip_push_pending_frames+0x1a0/0x240
[ 23.110652] raw_sendmsg+0x102e/0x19e0
[ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10
[ 23.111093] ? lock_release+0x204/0x400
[ 23.111304] ? __mod_lruvec_page_state+0x148/0x330
[ 23.111567] ? find_held_lock+0x8e/0xb0
[ 23.111777] ? find_held_lock+0x8e/0xb0
[ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0
[ 23.112225] ? aa_sk_perm+0x18a/0x550
[ 23.112431] ? filemap_map_pages+0x4f1/0x900
[ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10
[ 23.112880] ? find_held_lock+0x8e/0xb0
[ 23.113098] inet_sendmsg+0xa0/0xb0
[ 23.113297] ? inet_sendmsg+0xa0/0xb0
[ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10
[ 23.113727] sock_sendmsg+0xf4/0x100
[ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0
[ 23.114190] __sys_sendto+0x1d4/0x290
[ 23.114391] ? __pfx___sys_sendto+0x10/0x10
[ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10
[ 23.114869] ? lock_release+0x204/0x400
[ 23.115076] ? find_held_lock+0x8e/0xb0
[ 23.115287] ? rcu_is_watching+0x23/0x60
[ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860
[ 23.115778] ? __kasan_check_write+0x14/0x30
[ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770
[ 23.116285] ? mark_held_locks+0x28/0xa0
[ 23.116503] ? do_syscall_64+0x37/0x90
[ 23.116713] __x64_sys_sendto+0x7f/0xb0
[ 23.116924] do_syscall_64+0x59/0x90
[ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30
[ 23.117387] ? irqentry_exit+0x77/0xb0
[ 23.117593] ? exc_page_fault+0x92/0x140
[ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 23.118081] RIP: 0033:0x7f744aee2bba
[ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[ 23.119237] RSP: 002b:00007ffd04a7c9f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 23.119644] RAX: ffffffffffffffda RBX: 00007ffd04a7e0a0 RCX: 00007f744aee2bba
[ 23.120023] RDX: 0000000000000040 RSI: 000056488e9e6300 RDI: 0000000000000003
[ 23.120413] RBP: 000056488e9e6300 R08: 00007ffd04a80320 R09: 0000000000000010
[ 23.120809] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 23.121219] R13: 00007ffd04a7dc38 R14: 00007ffd04a7ca00 R15: 00007ffd04a7e0a0
[ 23.121617] </TASK>
[ 23.121749]
[ 23.121845] The buggy address belongs to the virtual mapping at
[ 23.121845] [ffffc90000000000, ffffc90000009000) created by:
[ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270
[ 23.122707]
[ 23.122803] The buggy address belongs to the physical page:
[ 23.123104] page:0000000072ac19f0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24a09
[ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff)
[ 23.123998] page_type: 0xffffffff()
[ 23.124194] raw: 000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000
[ 23.124610] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 23.125023] page dumped because: kasan: bad access detected
[ 23.125326]
[ 23.125421] Memory state around the buggy address:
[ 23.125682] ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.126072] ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00
[ 23.126455] >ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00
[ 23.126840] ^
[ 23.127138] ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3
[ 23.127522] ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
[ 23.127906] ==================================================================
[ 23.128324] Disabling lock debugging due to kernel taint
Using simple s16 pointers for the 16-bit accesses fixes the problem. For
the 32-bit accesses, src and dst can be used directly.
Fixes:
|
|
|
Thadeu Lima de Souza Cascardo
|
515ad53079 |
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202
[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000
[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000
[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500
[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10
[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0
[ 33.104872] PKRU: 55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace 0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain.
Fixes:
|
|
|
Florian Westphal
|
eaf9e7192e |
netfilter: conntrack: don't fold port numbers into addresses before hashing
Originally this used jhash2() over tuple and folded the zone id,
the pernet hash value, destination port and l4 protocol number into the
32bit seed value.
When the switch to siphash was done, I used an on-stack temporary
buffer to build a suitable key to be hashed via siphash().
But this showed up as performance regression, so I got rid of
the temporary copy and collected to-be-hashed data in 4 u64 variables.
This makes it easy to build tuples that produce the same hash, which isn't
desirable even though chain lengths are limited.
Switch back to plain siphash, but just like with jhash2(), take advantage
of the fact that most of to-be-hashed data is already in a suitable order.
Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark
last member that can be used as hash input.
The only remaining data that isn't present in the tuple structure are the
zone identifier and the pernet hash: fold those into the key.
Fixes:
|
|
Florent Revest
|
6eef7a2b93 |
netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
If nf_conntrack_init_start() fails (for example due to a
register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()
clean-up path frees the nf_ct_helper_hash map.
When built with NF_CONNTRACK=y, further netfilter modules (e.g:
netfilter_conntrack_ftp) can still be loaded and call
nf_conntrack_helpers_register(), independently of whether nf_conntrack
initialized correctly. This accesses the nf_ct_helper_hash dangling
pointer and causes a uaf, possibly leading to random memory corruption.
This patch guards nf_conntrack_helper_register() from accessing a freed
or uninitialized nf_ct_helper_hash pointer and fixes possible
uses-after-free when loading a conntrack module.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Florian Westphal
|
8a9dc07ba9 |
netfilter: conntrack: gre: don't set assured flag for clash entries
Now that conntrack core is allowd to insert clashing entries, make sure
GRE won't set assured flag on NAT_CLASH entries, just like UDP.
Doing so prevents early_drop logic for these entries.
Fixes:
|
|
|
Pablo Neira Ayuso
|
1689f25924 |
netfilter: nf_tables: report use refcount overflow
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes:
|
|
Linus Torvalds
|
c156d4af43 |
- New Drivers
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
|
|
|
Linus Torvalds
|
3a8a670eee |
Networking changes for 6.5.
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
|
|
Linus Torvalds
|
582c161cf3 |
hardening updates for v6.5-rc1
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmSbftQWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJj0MD/9X9jzJzCmsAU+yNldeoAzC84Sk GVU3RBxGcTNysL1gZXynkIgigw7DWc4htMGeSABHHwQRVP65JCH1Kw/VqIkyumbx 9LdX6IklMJb4pRT4PVU3azebV4eNmSjlur2UxMeW54Czm91/6I8RHbJOyAPnOUmo 2oomGdP/hpEHtKR7hgy8Axc6w5ySwQixh2V5sVZG3VbvCS5WKTmTXbs6puuRT5hz iHt7v+7VtEg/Qf1W7J2oxfoghvVBsaRrSLrExWT/oZYh1ZxM7DsCAAoG/IsDgHGA 9LBXiRECgAFThbHVxLvvKZQMXdVk0i8iXLX43XMKC0wTA+NTyH7wlcQQ4RWNMuo8 sfA9Qm9gMArXaf64aymr3Uwn20Zan0391HdlbhOJZAE6v3PPJbleUnM58AzD2d3r 5Lz6AIFBxDImy+3f9iDWgacCT5/PkeiXTHzk9QnKhJyKKtRA58XJxj4q2+rPnGJP n4haXqoxD5FJbxdXiGKk31RS0U5HBug7wkOcUrTqDHUbc/QNU2b7dxTKUx+zYtCU uV5emPzpF4H4z+91WpO47n9gkMAfwV0lt9S2dwS8pxsgqctbmIan+Jgip7rsqZ2G OgLXBsb43eEs+6WgO8tVt/ZHYj9ivGMdrcNcsIfikzNs/xweUJ53k2xSEn2xEa5J cwANDmkL6QQK7yfeeg== =s0j1 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit |
|
Jakub Kicinski
|
3674fbf045 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Jakub Kicinski
|
61dc651cdf |
netfilter pull request 23-06-26
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmSZMg8ACgkQ1V2XiooU IOSPnQ//VBUgCxUtgCuQX4PwY+Dqr//BLD8DcA8SNMKqCpYPmXyamPS+ZhtRI1c5 NplWcFuaER4hqiVHkbKyOzOitDXQb4s4Mn09YyLAIb2/uhxg1f79SYSGSi7H5Fay LElP7l84ars0GxlyUNmiwyzA4ySFyuWekT35o2A3eX5gawpf9mPpD21uOqAOKcad V2Z7Rz0mFcz3e400DNEx2DNehXSWZQT2O+05zIWFfpBZ7UB42GJaC+Id1RqtIX2m w5a2DtvWGKUcgWkA5KHqSQn0Ft21MePqL4QsS/s3z0jffPJUkoQX9pqnccFqr9LL 0aWKOSJFZoYtnbUGkRaPY5Kdob7Wgk5px4FUUBHORb39I98w0zP5h1hFY8jgMJxn J4+8Ys4C7Kv3Z+vq6sEo07WnbaIhj4LNO9GRwjaO2NP/UPUqrGIuhB1elBoVL8uX YvoVF6oRaB4ccaH7gR/4R6liF9flsH16OYJTbHp632Ali1nVZDP1vAvNviI5V12G WhrPVi50Utxn9KrV6ez6JJY2ysts7tip/TVAxQN0hDIS22IOxJcuiYoCxaXOEjPJ 8hd6jkF0NApwnlSkPmoqo+ohQ42Az2PtDvEsENw+U7XHur99Ed1ywxRG/K/Pm6gX QjUhoAfr9hXObwjoHKNID3VZnZpEjEsVr7CBFvj6S6FyTx3Ag5k= =wxop -----END PGP SIGNATURE----- Merge tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Allow slightly larger IPVS connection table size from Kconfig for 64-bit arch, from Abhijeet Rastogi. 2) Since IPVS connection table might be larger than 2^20 after previous patch, allow to limit it depending on the available memory. Moreover, use kvmalloc. From Julian Anastasov. 3) Do not rebuild VLAN header in nft_payload when matching source and destination MAC address. 4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal. 5) Allow to update set size, also from Florian. 6) Improve NAT tuple selection when connection is closing, from Florian Westphal. 7) Support for resetting set element stateful expression, from Phil Sutter. 8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables, from Florian Westphal. * tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: limit allowed range via nla_policy netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET netfilter: snat: evict closing tcp entries on reply tuple collision netfilter: nf_tables: permit update of set size netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test netfilter: nft_payload: rebuild vlan header when needed ipvs: dynamically limit the connection hash table ipvs: increase ip_vs_conn_tab_bits range for 64BIT ==================== Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Pablo Neira Ayuso
|
b389139f12 |
netfilter: nf_tables: fix underflow in chain reference counter
Set element addition error path decrements reference counter on chains twice: once on element release and again via nft_data_release(). Then, |
|
|
Pablo Neira Ayuso
|
3e70489721 |
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
Otherwise a dangling reference to a rule object that is gone remains
in the set binding list.
Fixes:
|
|
Ilia.Gavrilov
|
f188d30087 |
netfilter: nf_conntrack_sip: fix the ct_sip_parse_numerical_param() return value.
ct_sip_parse_numerical_param() returns only 0 or 1 now.
But process_register_request() and process_register_response() imply
checking for a negative value if parsing of a numerical header parameter
failed.
The invocation in nf_nat_sip() looks correct:
if (ct_sip_parse_numerical_param(...) > 0 &&
...) { ... }
Make the return value of the function ct_sip_parse_numerical_param()
a tristate to fix all the cases
a) return 1 if value is found; *val is set
b) return 0 if value is not found; *val is unchanged
c) return -1 on error; *val is undefined
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes:
|
|
|
Florian Westphal
|
ff0a3a7d52 |
netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one
Eric Dumazet says:
nf_conntrack_dccp_packet() has an unique:
dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh);
And nothing more is 'pulled' from the packet, depending on the content.
dh->dccph_doff, and/or dh->dccph_x ...)
So dccp_ack_seq() is happily reading stuff past the _dh buffer.
BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0
Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371
[..]
Fix this by increasing the stack buffer to also include room for
the extra sequence numbers and all the known dccp packet type headers,
then pull again after the initial validation of the basic header.
While at it, mark packets invalid that lack 48bit sequence bit but
where RFC says the type MUST use them.
Compile tested only.
v2: first skb_header_pointer() now needs to adjust the size to
only pull the generic header. (Eric)
Heads-up: I intend to remove dccp conntrack support later this year.
Fixes:
|
|
|
Florian Westphal
|
a412dbf40f |
netfilter: nf_tables: limit allowed range via nla_policy
These NLA_U32 types get stored in u8 fields, reject invalid values instead of silently casting to u8. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
Phil Sutter
|
079cd63321 |
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout or attached stateful expressions like counters or quotas - reset them all at once. Respect a per element timeout value if present to reset the 'expires' value to. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Florian Westphal
|
4589725502 |
netfilter: snat: evict closing tcp entries on reply tuple collision
When all tried source tuples are in use, the connection request (skb) and the new conntrack will be dropped in nf_confirm() due to the non-recoverable clash. Make it so that the last 32 attempts are allowed to evict a colliding entry if this connection is already closing and the new sequence number has advanced past the old one. Such "all tuples taken" secenario can happen with tcp-rpc workloads where same dst:dport gets queried repeatedly. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Florian Westphal
|
96b2ef9b16 |
netfilter: nf_tables: permit update of set size
Now that set->nelems is always updated permit update of the sets max size. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Florian Westphal
|
78aa23d008 |
netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test
Callers already hold rcu_read_lock. Prior to RCU conversion this used to be a read_lock_bh(), but now the bh-disable isn't needed anymore. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Pablo Neira Ayuso
|
de6843be30 |
netfilter: nft_payload: rebuild vlan header when needed
Skip rebuilding the vlan header when accessing destination and source mac address. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
|
|
Jakub Kicinski
|
a7384f3918 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh |
|
|
Phil Sutter
|
42e344f016 |
netfilter: nf_tables: Fix for deleting base chains with payload
When deleting a base chain, iptables-nft simply submits the whole chain
to the kernel, including the NFTA_CHAIN_HOOK attribute. The new code
added by fixed commit then turned this into a chain update, destroying
the hook but not the chain itself. Detect the situation by checking if
the chain type is either netdev or inet/ingress.
Fixes:
|
|
|
Pablo Neira Ayuso
|
62f9a68a36 |
netfilter: nfnetlink_osf: fix module autoload
Move the alias from xt_osf to nfnetlink_osf.
Fixes:
|
|
|
Pablo Neira Ayuso
|
043d2acf57 |
netfilter: nf_tables: drop module reference after updating chain
Otherwise the module reference counter is leaked.
Fixes
|
|
|
Pablo Neira Ayuso
|
e26d3009ef |
netfilter: nf_tables: disallow timeout for anonymous sets
Never used from userspace, disallow these parameters. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |