mirror of https://github.com/torvalds/linux.git
735 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Alexei Starovoitov
|
700d4796ef |
bpf: Optimize program stats
Move bpf_prog_stats from prog->aux into prog to avoid one extra load in critical path of program execution. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210033634.62081-2-alexei.starovoitov@gmail.com |
|
David S. Miller
|
dc9d87581d | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | |
Andrei Matei
|
01f810ace9 |
bpf: Allow variable-offset stack access
Before this patch, variable offset access to the stack was dissalowed for regular instructions, but was allowed for "indirect" accesses (i.e. helpers). This patch removes the restriction, allowing reading and writing to the stack through stack pointers with variable offsets. This makes stack-allocated buffers more usable in programs, and brings stack pointers closer to other types of pointers. The motivation is being able to use stack-allocated buffers for data manipulation. When the stack size limit is sufficient, allocating buffers on the stack is simpler than per-cpu arrays, or other alternatives. In unpriviledged programs, variable-offset reads and writes are disallowed (they were already disallowed for the indirect access case) because the speculative execution checking code doesn't support them. Additionally, when writing through a variable-offset stack pointer, if any pointers are in the accessible range, there's possilibities of later leaking pointers because the write cannot be tracked precisely. Writes with variable offset mark the whole range as initialized, even though we don't know which stack slots are actually written. This is in order to not reject future reads to these slots. Note that this doesn't affect writes done through helpers; like before, helpers need the whole stack range to be initialized to begin with. All the stack slots are in range are considered scalars after the write; variable-offset register spills are not tracked. For reads, all the stack slots in the variable range needs to be initialized (but see above about what writes do), otherwise the read is rejected. All register spilled in stack slots that might be read are marked as having been read, however reads through such pointers don't do register filling; the target register will always be either a scalar or a constant zero. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210207011027.676572-2-andreimatei1@gmail.com |
|
Daniel Borkmann
|
e88b2c6e5a |
bpf: Fix 32 bit src register truncation on div/mod
While reviewing a different fix, John and I noticed an oddity in one of the
BPF program dumps that stood out, for example:
# bpftool p d x i 13
0: (b7) r0 = 808464450
1: (b4) w4 = 808464432
2: (bc) w0 = w0
3: (15) if r0 == 0x0 goto pc+1
4: (9c) w4 %= w0
[...]
In line 2 we noticed that the mov32 would 32 bit truncate the original src
register for the div/mod operation. While for the two operations the dst
register is typically marked unknown e.g. from adjust_scalar_min_max_vals()
the src register is not, and thus verifier keeps tracking original bounds,
simplified:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = -1
1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b7) r1 = -1
2: R0_w=invP-1 R1_w=invP-1 R10=fp0
2: (3c) w0 /= w1
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0
3: (77) r1 >>= 32
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0
4: (bf) r0 = r1
5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0
5: (95) exit
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Runtime result of r0 at exit is 0 instead of expected -1. Remove the
verifier mov32 src rewrite in div/mod and replace it with a jmp32 test
instead. After the fix, we result in the following code generation when
having dividend r1 and divisor r6:
div, 64 bit: div, 32 bit:
0: (b7) r6 = 8 0: (b7) r6 = 8
1: (b7) r1 = 8 1: (b7) r1 = 8
2: (55) if r6 != 0x0 goto pc+2 2: (56) if w6 != 0x0 goto pc+2
3: (ac) w1 ^= w1 3: (ac) w1 ^= w1
4: (05) goto pc+1 4: (05) goto pc+1
5: (3f) r1 /= r6 5: (3c) w1 /= w6
6: (b7) r0 = 0 6: (b7) r0 = 0
7: (95) exit 7: (95) exit
mod, 64 bit: mod, 32 bit:
0: (b7) r6 = 8 0: (b7) r6 = 8
1: (b7) r1 = 8 1: (b7) r1 = 8
2: (15) if r6 == 0x0 goto pc+1 2: (16) if w6 == 0x0 goto pc+1
3: (9f) r1 %= r6 3: (9c) w1 %= w6
4: (b7) r0 = 0 4: (b7) r0 = 0
5: (95) exit 5: (95) exit
x86 in particular can throw a 'divide error' exception for div
instruction not only for divisor being zero, but also for the case
when the quotient is too large for the designated register. For the
edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT
since we always zero edx (rdx). Hence really the only protection
needed is against divisor being zero.
Fixes:
|
|
|
Daniel Borkmann
|
fd675184fc |
bpf: Fix verifier jmp32 pruning decision logic
Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 808464450
1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (b4) w4 = 808464432
2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0
2: (9c) w4 %= w0
3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
3: (66) if w4 s> 0x30303030 goto pc+0
R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
4: (7f) r0 >>= r0
5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0
5: (9c) w4 %= w0
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
9: (95) exit
propagating r0
from 6 to 7: safe
4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
4: (7f) r0 >>= r0
5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0
5: (9c) w4 %= w0
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
propagating r0
7: safe
propagating r0
from 6 to 7: safe
processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
The underlying program was xlated as follows:
# bpftool p d x i 10
0: (b7) r0 = 808464450
1: (b4) w4 = 808464432
2: (bc) w0 = w0
3: (15) if r0 == 0x0 goto pc+1
4: (9c) w4 %= w0
5: (66) if w4 s> 0x30303030 goto pc+0
6: (7f) r0 >>= r0
7: (bc) w0 = w0
8: (15) if r0 == 0x0 goto pc+1
9: (9c) w4 %= w0
10: (66) if w0 s> 0x3030 goto pc+0
11: (d6) if w0 s<= 0x303030 goto pc+1
12: (05) goto pc-1
13: (95) exit
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we are
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking a closer look at the verifier analysis, the reason is that it misjudges
its pruning decision at the first 'from 6 to 7: safe' occasion. What happens
is that while both old/cur registers are marked as precise, they get misjudged
for the jmp32 case as range_within() yields true, meaning that the prior
verification path with a wider register bound could be verified successfully
and therefore the current path with a narrower register bound is deemed safe
as well whereas in reality it's not. R0 old/cur path's bounds compare as
follows:
old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff)
cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff)
old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff
cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff
The 64 bit bounds generally look okay and while the information that got
propagated from 32 to 64 bit looks correct as well, it's not precise enough
for judging a conditional jmp32. Given the latter only operates on subregisters
we also need to take these into account as well for a range_within() probe
in order to be able to prune paths. Extending the range_within() constraint
to both bounds will be able to tell us that the old signed 32 bit bounds are
not wider than the cur signed 32 bit bounds.
With the fix in place, the program will now verify the 'goto' branch case as
it should have been:
[...]
6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
6: (66) if w0 s> 0x3030 goto pc+0
R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0
9: (95) exit
7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
7: (d6) if w0 s<= 0x303030 goto pc+1
R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0
8: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1
The bug is quite subtle in the sense that when verifier would determine that
a given branch is dead code, it would (here: wrongly) remove these instructions
from the program and hard-wire the taken branch for privileged programs instead
of the 'goto pc-1' rewrites which will cause hard to debug problems.
Fixes:
|
|
|
Daniel Borkmann
|
ee114dd64c |
bpf: Fix verifier jsgt branch analysis on max bound
Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return
code for both will tell the caller whether a given conditional jump is taken
or not, e.g. 1 means branch will be taken [for the involved registers] and the
goto target will be executed, 0 means branch will not be taken and instead we
fall-through to the next insn, and last but not least a -1 denotes that it is
not known at verification time whether a branch will be taken or not. Now while
the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the
branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval
since the branch will also be taken for reg->s32_max_value == sval. The jgt
branch analysis, for example, gets this right.
Fixes:
|
|
Yonghong Song
|
23a2d70c7a |
bpf: Refactor BPF_PSEUDO_CALL checking as a helper function
There is no functionality change. This refactoring intends to facilitate next patch change with BPF_PSEUDO_FUNC. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210204234827.1628953-1-yhs@fb.com |
|
KP Singh
|
ba90c2cc02 |
bpf: Allow usage of BPF ringbuffer in sleepable programs
The BPF ringbuffer map is pre-allocated and the implementation logic does not rely on disabling preemption or per-cpu data structures. Using the BPF ringbuffer sleepable LSM and tracing programs does not trigger any warnings with DEBUG_ATOMIC_SLEEP, DEBUG_PREEMPT, PROVE_RCU and PROVE_LOCKING and LOCKDEP enabled. This allows helpers like bpf_copy_from_user and bpf_ima_inode_hash to write to the BPF ring buffer from sleepable BPF programs. Signed-off-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210204193622.3367275-2-kpsingh@kernel.org |
|
Brendan Jackman
|
37086bfdc7 |
bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH
When BPF_FETCH is set, atomic instructions load a value from memory into a register. The current verifier code first checks via check_mem_access whether we can access the memory, and then checks via check_reg_arg whether we can write into the register. For loads, check_reg_arg has the side-effect of marking the register's value as unkonwn, and check_mem_access has the side effect of propagating bounds from memory to the register. This currently only takes effect for stack memory. Therefore with the current order, bounds information is thrown away, but by simply reversing the order of check_reg_arg vs. check_mem_access, we can instead propagate bounds smartly. A simple test is added with an infinite loop that can only be proved unreachable if this propagation is present. This is implemented both with C and directly in test_verifier using assembly. Suggested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210202135002.4024825-1-jackmanb@google.com |
|
Stanislav Fomichev
|
772412176f |
bpf: Allow rewriting to ports under ip_unprivileged_port_start
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port
to the privileged ones (< ip_unprivileged_port_start), but it will
be rejected later on in the __inet_bind or __inet6_bind.
Let's add another return value to indicate that CAP_NET_BIND_SERVICE
check should be ignored. Use the same idea as we currently use
in cgroup/egress where bit #1 indicates CN. Instead, for
cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should
be bypassed.
v5:
- rename flags to be less confusing (Andrey Ignatov)
- rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags
and accept BPF_RET_SET_CN (no behavioral changes)
v4:
- Add missing IPv6 support (Martin KaFai Lau)
v3:
- Update description (Martin KaFai Lau)
- Fix capability restore in selftest (Martin KaFai Lau)
v2:
- Switch to explicit return code (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
|
|
Tobias Klauser
|
18b24d78d5 |
bpf: Fix typo in scalar{,32}_min_max_rsh comments
s/bounts/bounds/ Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210121174324.24127-1-tklauser@distanz.ch |
|
Jakub Kicinski
|
0fe2f273ab |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts: drivers/net/can/dev.c commit |
|
|
Daniel Borkmann
|
bc895e8b2a |
bpf: Fix signed_{sub,add32}_overflows type handling
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to
|
|
|
Brendan Jackman
|
981f94c3e9 |
bpf: Add bitwise atomic instructions
This adds instructions for atomic[64]_[fetch_]and atomic[64]_[fetch_]or atomic[64]_[fetch_]xor All these operations are isomorphic enough to implement with the same verifier, interpreter, and x86 JIT code, hence being a single commit. The main interesting thing here is that x86 doesn't directly support the fetch_ version these operations, so we need to generate a CMPXCHG loop in the JIT. This requires the use of two temporary registers, IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com |
|
|
Brendan Jackman
|
5ffa25502b |
bpf: Add instructions for atomic_[cmp]xchg
This adds two atomic opcodes, both of which include the BPF_FETCH flag. XCHG without the BPF_FETCH flag would naturally encode atomic_set. This is not supported because it would be of limited value to userspace (it doesn't imply any barriers). CMPXCHG without BPF_FETCH woulud be an atomic compare-and-write. We don't have such an operation in the kernel so it isn't provided to BPF either. There are two significant design decisions made for the CMPXCHG instruction: - To solve the issue that this operation fundamentally has 3 operands, but we only have two register fields. Therefore the operand we compare against (the kernel's API calls it 'old') is hard-coded to be R0. x86 has similar design (and A64 doesn't have this problem). A potential alternative might be to encode the other operand's register number in the immediate field. - The kernel's atomic_cmpxchg returns the old value, while the C11 userspace APIs return a boolean indicating the comparison result. Which should BPF do? A64 returns the old value. x86 returns the old value in the hard-coded register (and also sets a flag). That means return-old-value is easier to JIT, so that's what we use. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com |
|
|
Brendan Jackman
|
5ca419f286 |
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC instructions, in order to have the previous value of the atomically-modified memory location loaded into the src register after an atomic op is carried out. Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com |
|
|
Brendan Jackman
|
c5bcb5eb4d |
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
I can't find a reason why this code is in resolve_pseudo_ldimm64; since I'll be modifying it in a subsequent commit, tidy it up. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-6-jackmanb@google.com |
|
|
Brendan Jackman
|
91c960b005 |
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com |
|
Gilad Reti
|
744ea4e388 |
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
Add support for pointer to mem register spilling, to allow the verifier
to track pointers to valid memory addresses. Such pointers are returned
for example by a successful call of the bpf_ringbuf_reserve helper.
The patch was partially contributed by CyberArk Software, Inc.
Fixes:
|
|
Andrii Nakryiko
|
541c3bad8d |
bpf: Support BPF ksym variables in kernel modules
Add support for directly accessing kernel module variables from BPF programs using special ldimm64 instructions. This functionality builds upon vmlinux ksym support, but extends ldimm64 with src_reg=BPF_PSEUDO_BTF_ID to allow specifying kernel module BTF's FD in insn[1].imm field. During BPF program load time, verifier will resolve FD to BTF object and will take reference on BTF object itself and, for module BTFs, corresponding module as well, to make sure it won't be unloaded from under running BPF program. The mechanism used is similar to how bpf_prog keeps track of used bpf_maps. One interesting change is also in how per-CPU variable is determined. The logic is to find .data..percpu data section in provided BTF, but both vmlinux and module each have their own .data..percpu entries in BTF. So for module's case, the search for DATASEC record needs to look at only module's added BTF types. This is implemented with custom search function. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20210112075520.4103414-6-andrii@kernel.org |
|
|
Brendan Jackman
|
28a8add641 |
bpf: Fix a verifier message for alloc size helper arg
The error message here is misleading, the argument will be rejected unless it is a known constant. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210112123913.2016804-1-jackmanb@google.com |
|
|
Jakub Kicinski
|
a6b5e026e6 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-12-14 1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest. 2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua. 3) Support for finding BTF based kernel attach targets through libbpf's bpf_program__set_attach_target() API, from Andrii Nakryiko. 4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song. 5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet. 6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo. 7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel. 8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman. 9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner, KP Singh, Jiri Olsa and various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits) selftests/bpf: Add a test for ptr_to_map_value on stack for helper access bpf: Permits pointers on stack for helper calls libbpf: Expose libbpf ring_buffer epoll_fd selftests/bpf: Add set_attach_target() API selftest for module target libbpf: Support modules in bpf_program__set_attach_target() API selftests/bpf: Silence ima_setup.sh when not running in verbose mode. selftests/bpf: Drop the need for LLVM's llc selftests/bpf: fix bpf_testmod.ko recompilation logic samples/bpf: Fix possible hang in xdpsock with multiple threads selftests/bpf: Make selftest compilation work on clang 11 selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore selftests/bpf: Drop tcp-{client,server}.py from Makefile selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV selftests/bpf: Xsk selftests - DRV POLL, NOPOLL selftests/bpf: Xsk selftests - SKB POLL, NOPOLL selftests/bpf: Xsk selftests framework bpf: Only provide bpf_sock_from_file with CONFIG_NET bpf: Return -ENOTSUPP when attaching to non-kernel BTF xsk: Validate socket state in xsk_recvmsg, prior touching socket members ... ==================== Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Yonghong Song
|
cd17d38f8b |
bpf: Permits pointers on stack for helper calls
Currently, when checking stack memory accessed by helper calls,
for spills, only PTR_TO_BTF_ID and SCALAR_VALUE are
allowed.
Song discovered an issue where the below bpf program
int dump_task(struct bpf_iter__task *ctx)
{
struct seq_file *seq = ctx->meta->seq;
static char[] info = "abc";
BPF_SEQ_PRINTF(seq, "%s\n", info);
return 0;
}
may cause a verifier failure.
The verifier output looks like:
; struct seq_file *seq = ctx->meta->seq;
1: (79) r1 = *(u64 *)(r1 +0)
; BPF_SEQ_PRINTF(seq, "%s\n", info);
2: (18) r2 = 0xffff9054400f6000
4: (7b) *(u64 *)(r10 -8) = r2
5: (bf) r4 = r10
;
6: (07) r4 += -8
; BPF_SEQ_PRINTF(seq, "%s\n", info);
7: (18) r2 = 0xffff9054400fe000
9: (b4) w3 = 4
10: (b4) w5 = 8
11: (85) call bpf_seq_printf#126
R1_w=ptr_seq_file(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=4,imm=0)
R3_w=inv4 R4_w=fp-8 R5_w=inv8 R10=fp0 fp-8_w=map_value
last_idx 11 first_idx 0
regs=8 stack=0 before 10: (b4) w5 = 8
regs=8 stack=0 before 9: (b4) w3 = 4
invalid indirect read from stack off -8+0 size 8
Basically, the verifier complains the map_value pointer at "fp-8" location.
To fix the issue, if env->allow_ptr_leaks is true, let us also permit
pointers on the stack to be accessible by the helper.
Reported-by: Song Liu <songliubraving@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013349.943719-1-yhs@fb.com
|
|
|
Jakub Kicinski
|
46d5e62dd3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Alexei Starovoitov
|
b02709587e |
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Fixes:
|
|
|
Jakub Kicinski
|
a1dd1d8697 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
Andrii Nakryiko
|
22dc4a0f5e |
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead, wherever BTF type IDs are involved, also track the instance of struct btf that goes along with the type ID. This allows to gradually add support for kernel module BTFs and using/tracking module types across BPF helper calls and registers. This patch also renames btf_id() function to btf_obj_id() to minimize naming clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID. Also, altough btf_vmlinux can't get destructed and thus doesn't need refcounting, module BTFs need that, so apply BTF refcounting universally when BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This makes for simpler clean up code. Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF trampoline key to include BTF object ID. To differentiate that from target program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are not allowed to take full 32 bits, so there is no danger of confusing that bit with a valid BTF type ID. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org |
|
Wedson Almeida Filho
|
59e2e27d22 |
bpf: Refactor check_cfg to use a structured loop.
The current implementation uses a number of gotos to implement a loop and different paths within the loop, which makes the code less readable than it would be with an explicit while-loop. This patch also replaces a chain of if/if-elses keyed on the same expression with a switch statement. No change in behaviour is intended. Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201121015509.3594191-1-wedsonaf@google.com |
|
|
Jakub Kicinski
|
56495a2442 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Dmitrii Banshchikov
|
f782e2c300 |
bpf: Relax return code check for subprograms
Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.
Fixes:
|
|
KP Singh
|
423f16108c |
bpf: Augment the set of sleepable LSM hooks
Update the set of sleepable hooks with the ones that do not trigger a warning with might_fault() when exercised with the correct kernel config options enabled, i.e. DEBUG_ATOMIC_SLEEP=y LOCKDEP=y PROVE_LOCKING=y This means that a sleepable LSM eBPF program can be attached to these LSM hooks. A new helper method bpf_lsm_is_sleepable_hook is added and the set is maintained locally in bpf_lsm.c Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201113005930.541956-2-kpsingh@chromium.org |
|
|
Alexei Starovoitov
|
6d94e741a8 |
bpf: Support for pointers beyond pkt_end.
This patch adds the verifier support to recognize inlined branch conditions. The LLVM knows that the branch evaluates to the same value, but the verifier couldn't track it. Hence causing valid programs to be rejected. The potential LLVM workaround: https://reviews.llvm.org/D87428 can have undesired side effects, since LLVM doesn't know that skb->data/data_end are being compared. LLVM has to introduce extra boolean variable and use inline_asm trick to force easier for the verifier assembly. Instead teach the verifier to recognize that r1 = skb->data; r1 += 10; r2 = skb->data_end; if (r1 > r2) { here r1 points beyond packet_end and subsequent if (r1 > r2) // always evaluates to "true". } Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201111031213.25109-2-alexei.starovoitov@gmail.com |
|
Kaixu Xia
|
f16e631333 |
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
The unsigned variable datasec_id is assigned a return value from the call
to check_pseudo_btf_id(), which may return negative error code.
This fixes the following coccicheck warning:
./kernel/bpf/verifier.c:9616:5-15: WARNING: Unsigned expression compared with zero: datasec_id > 0
Fixes:
|
|
|
KP Singh
|
3ca1032ab7 |
bpf: Implement get_current_task_btf and RET_PTR_TO_BTF_ID
The currently available bpf_get_current_task returns an unsigned integer which can be used along with BPF_CORE_READ to read data from the task_struct but still cannot be used as an input argument to a helper that accepts an ARG_PTR_TO_BTF_ID of type task_struct. In order to implement this helper a new return type, RET_PTR_TO_BTF_ID, is added. This is similar to RET_PTR_TO_BTF_ID_OR_NULL but does not require checking the nullness of returned pointer. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201106103747.2780972-6-kpsingh@chromium.org |
|
|
KP Singh
|
4cf1bc1f10 |
bpf: Implement task local storage
Similar to bpf_local_storage for sockets and inodes add local storage for task_struct. The life-cycle of storage is managed with the life-cycle of the task_struct. i.e. the storage is destroyed along with the owning task with a callback to the bpf_task_storage_free from the task_free LSM hook. The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the security blob which are now stackable and can co-exist with other LSMs. The userspace map operations can be done by using a pid fd as a key passed to the lookup, update and delete operations. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201106103747.2780972-3-kpsingh@chromium.org |
|
|
KP Singh
|
9e7a4d9831 |
bpf: Allow LSM programs to use bpf spin locks
Usage of spin locks was not allowed for tracing programs due to
insufficient preemption checks. The verifier does not currently prevent
LSM programs from using spin locks, but the helpers are not exposed
via bpf_lsm_func_proto.
Based on the discussion in [1], non-sleepable LSM programs should be
able to use bpf_spin_{lock, unlock}.
Sleepable LSM programs can be preempted which means that allowng spin
locks will need more work (disabling preemption and the verifier
ensuring that no sleepable helpers are called when a spin lock is held).
[1]: https://lore.kernel.org/bpf/20201103153132.2717326-1-kpsingh@chromium.org/T/#md601a053229287659071600d3483523f752cd2fb
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-2-kpsingh@chromium.org
|
|
Martin KaFai Lau
|
93c230e3f5 |
bpf: Enforce id generation for all may-be-null register type
The commit |
|
|
Alexei Starovoitov
|
e688c3db7c |
bpf: Fix register equivalence tracking.
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either
true or false branch. In the case 'if (reg->id)' check was done on the other
branch the counter part register would have reg->id == 0 when called into
find_equal_scalars(). In such case the helper would incorrectly identify other
registers with id == 0 as equivalent and propagate the state incorrectly.
Fix it by preserving ID across reg_set_min_max().
In other words any kind of comparison operator on the scalar register
should preserve its ID to recognize:
r1 = r2
if (r1 == 20) {
#1 here both r1 and r2 == 20
} else if (r2 < 20) {
#2 here both r1 and r2 < 20
}
The patch is addressing #1 case. The #2 was working correctly already.
Fixes:
|
|
|
Jakub Kicinski
|
ccdf7fae3a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-10-12 The main changes are: 1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong. 2) libbpf relocation support for different size load/store, from Andrii. 3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel. 4) BPF support for per-cpu variables, form Hao. 5) sockmap improvements, from John. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Daniel Borkmann
|
4a8f87e60f |
bpf: Allow for map-in-map with dynamic inner array map entries
Recent work in |
|
|
Yonghong Song
|
5689d49b71 |
bpf: Track spill/fill of bounded scalars.
Under register pressure the llvm may spill registers with bounds into the stack. The verifier has to track them through spill/fill otherwise many kinds of bound errors will be seen. The spill/fill of induction variables was already happening. This patch extends this logic from tracking spill/fill of a constant into any bounded register. There is no need to track spill/fill of unbounded, since no new information will be retrieved from the stack during register fill. Though extra stack difference could cause state pruning to be less effective, no adverse affects were seen from this patch on selftests and on cilium programs. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201009011240.48506-3-alexei.starovoitov@gmail.com |
|
|
Alexei Starovoitov
|
75748837b7 |
bpf: Propagate scalar ranges through register assignments.
The llvm register allocator may use two different registers representing the same virtual register. In such case the following pattern can be observed: 1047: (bf) r9 = r6 1048: (a5) if r6 < 0x1000 goto pc+1 1050: ... 1051: (a5) if r9 < 0x2 goto pc+66 1052: ... 1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */ This is normal behavior of greedy register allocator. The slides 137+ explain why regalloc introduces such register copy: http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf There is no way to tell llvm 'not to do this'. Hence the verifier has to recognize such patterns. In order to track this information without backtracking allocate ID for scalars in a similar way as it's done for find_good_pkt_pointers(). When the verifier encounters r9 = r6 assignment it will assign the same ID to both registers. Later if either register range is narrowed via conditional jump propagate the register state into the other register. Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The register ID is ignored for scalars in regsafe() and doesn't affect state pruning. mark_reg_unknown() clears the ID. It's used to process call, endian and other instructions. Hence ID is explicitly cleared only in adjust_reg_min_max_vals() and in 32-bit mov. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201009011240.48506-2-alexei.starovoitov@gmail.com |
|
|
Jakub Kicinski
|
9d49aea13f |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Daniel Borkmann
|
5b9fbeb75b |
bpf: Fix scalar32_min_max_or bounds tracking
Simon reported an issue with the current scalar32_min_max_or() implementation.
That is, compared to the other 32 bit subreg tracking functions, the code in
scalar32_min_max_or() stands out that it's using the 64 bit registers instead
of 32 bit ones. This leads to bounds tracking issues, for example:
[...]
8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm
8: (79) r1 = *(u64 *)(r0 +0)
R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm
9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm
9: (b7) r0 = 1
10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm
10: (18) r2 = 0x600000002
12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
12: (ad) if r1 < r2 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
13: (95) exit
14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
14: (25) if r1 > 0x0 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
15: (95) exit
16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
16: (47) r1 |= 0
17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
[...]
The bound tests on the map value force the upper unsigned bound to be 25769803777
in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By
using OR they are truncated and thus result in the range [1,1] for the 32 bit reg
tracker. This is incorrect given the only thing we know is that the value must be
positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the
subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes
sense, for example, for the case where we update dst_reg->s32_{min,max}_value in
the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as
we know that these are positive. Previously, in the else branch the 64 bit values
of umin_value=1 and umax_value=32212254719 were used and latter got truncated to
be 1 as upper bound there. After the fix the subreg range is now correct:
[...]
8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm
8: (79) r1 = *(u64 *)(r0 +0)
R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm
9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm
9: (b7) r0 = 1
10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm
10: (18) r2 = 0x600000002
12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
12: (ad) if r1 < r2 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
13: (95) exit
14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
14: (25) if r1 > 0x0 goto pc+1
R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
15: (95) exit
16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
16: (47) r1 |= 0
17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm
[...]
Fixes:
|
|
Randy Dunlap
|
49a2a4d416 |
kernel/bpf/verifier: Fix build when NET is not enabled
Fix build errors in kernel/bpf/verifier.c when CONFIG_NET is
not enabled.
../kernel/bpf/verifier.c:3995:13: error: ‘btf_sock_ids’ undeclared here (not in a function); did you mean ‘bpf_sock_ops’?
.btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON],
../kernel/bpf/verifier.c:3995:26: error: ‘BTF_SOCK_TYPE_SOCK_COMMON’ undeclared here (not in a function); did you mean ‘PTR_TO_SOCK_COMMON’?
.btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON],
Fixes:
|
|
Gustavo A. R. Silva
|
8731745e48 |
bpf, verifier: Use fallthrough pseudo-keyword
Replace /* fallthrough */ comments with the new pseudo-keyword macro fallthrough [1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201002234217.GA12280@embeddedor |
|
Hao Luo
|
63d9b80dcf |
bpf: Introducte bpf_this_cpu_ptr()
Add bpf_this_cpu_ptr() to help access percpu var on this cpu. This helper always returns a valid pointer, therefore no need to check returned value for NULL. Also note that all programs run with preemption disabled, which means that the returned pointer is stable during all the execution of the program. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-6-haoluo@google.com |
|
|
Hao Luo
|
eaa6bcb71e |
bpf: Introduce bpf_per_cpu_ptr()
Add bpf_per_cpu_ptr() to help bpf programs access percpu vars. bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the kernel except that it may return NULL. This happens when the cpu parameter is out of range. So the caller must check the returned value. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-5-haoluo@google.com |
|
|
Hao Luo
|
4976b718c3 |
bpf: Introduce pseudo_btf_id
Pseudo_btf_id is a type of ld_imm insn that associates a btf_id to a ksym so that further dereferences on the ksym can use the BTF info to validate accesses. Internally, when seeing a pseudo_btf_id ld insn, the verifier reads the btf_id stored in the insn[0]'s imm field and marks the dst_reg as PTR_TO_BTF_ID. The btf_id points to a VAR_KIND, which is encoded in btf_vminux by pahole. If the VAR is not of a struct type, the dst reg will be marked as PTR_TO_MEM instead of PTR_TO_BTF_ID and the mem_size is resolved to the size of the VAR's type. >From the VAR btf_id, the verifier can also read the address of the ksym's corresponding kernel var from kallsyms and use that to fill dst_reg. Therefore, the proper functionality of pseudo_btf_id depends on (1) kallsyms and (2) the encoding of kernel global VARs in pahole, which should be available since pahole v1.18. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-2-haoluo@google.com |
|
Toke Høiland-Jørgensen
|
4a1e7c0c63 |
bpf: Support attaching freplace programs to multiple attach points
This enables support for attaching freplace programs to multiple attach points. It does this by amending the UAPI for bpf_link_Create with a target btf ID that can be used to supply the new attachment point along with the target program fd. The target must be compatible with the target that was supplied at program load time. The implementation reuses the checks that were factored out of check_attach_btf_id() to ensure compatibility between the BTF types of the old and new attachment. If these match, a new bpf_tracing_link will be created for the new attach target, allowing multiple attachments to co-exist simultaneously. The code could theoretically support multiple-attach of other types of tracing programs as well, but since I don't have a use case for any of those, there is no API support for doing so. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355169.48470.17165680973640685368.stgit@toke.dk |
|
|
Toke Høiland-Jørgensen
|
3aac1ead5e |
bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attach
In preparation for allowing multiple attachments of freplace programs, move the references to the target program and trampoline into the bpf_tracing_link structure when that is created. To do this atomically, introduce a new mutex in prog->aux to protect writing to the two pointers to target prog and trampoline, and rename the members to make it clear that they are related. With this change, it is no longer possible to attach the same tracing program multiple times (detaching in-between), since the reference from the tracing program to the target disappears on the first attach. However, since the next patch will let the caller supply an attach target, that will also make it possible to attach to the same place multiple times. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk |
|
Alan Maguire
|
76654e67f3 |
bpf: Provide function to get vmlinux BTF information
It will be used later for BPF structure display support Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-2-git-send-email-alan.maguire@oracle.com |
|
|
Toke Høiland-Jørgensen
|
f7b12b6fea |
bpf: verifier: refactor check_attach_btf_id()
The check_attach_btf_id() function really does three things: 1. It performs a bunch of checks on the program to ensure that the attachment is valid. 2. It stores a bunch of state about the attachment being requested in the verifier environment and struct bpf_prog objects. 3. It allocates a trampoline for the attachment. This patch splits out (1.) and (3.) into separate functions which will perform the checks, but return the computed values instead of directly modifying the environment. This is done in preparation for reusing the checks when the actual attachment is happening, which will allow tracing programs to have multiple (compatible) attachments. This also fixes a bug where a bunch of checks were skipped if a trampoline already existed for the tracing target. Fixes: |
|
|
Toke Høiland-Jørgensen
|
efc68158c4 |
bpf: change logging calls from verbose() to bpf_log() and use log pointer
In preparation for moving code around, change a bunch of references to env->log (and the verbose() logging helper) to use bpf_log() and a direct pointer to struct bpf_verifier_log. While we're touching the function signature, mark the 'prog' argument to bpf_check_type_match() as const. Also enhance the bpf_verifier_log_needed() check to handle NULL pointers for the log struct so we can re-use the code with logging disabled. Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Toke Høiland-Jørgensen
|
1af9270e90 |
bpf: disallow attaching modify_return tracing functions to other BPF programs
From the checks and commit messages for modify_return, it seems it was never the intention that it should be possible to attach a tracing program with expected_attach_type == BPF_MODIFY_RETURN to another BPF program. However, check_attach_modify_return() will only look at the function name, so if the target function starts with "security_", the attach will be allowed even for bpf2bpf attachment. Fix this oversight by also blocking the modification if a target program is supplied. Fixes: |
|
Lorenz Bauer
|
6550f2dddf |
bpf: sockmap: Enable map_update_elem from bpf_iter
Allow passing a pointer to a BTF struct sock_common* when updating a sockmap or sockhash. Since BTF pointers can fault and therefore be NULL at runtime we need to add an additional !sk check to sock_map_update_elem. Since we may be passed a request or timewait socket we also need to check sk_fullsock. Doing this allows calling map_update_elem on sockmap from bpf_iter context, which uses BTF pointers. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200928090805.23343-2-lmb@cloudflare.com |
|
John Fastabend
|
4fbb38a3b2 |
bpf, verifier: Remove redundant var_off.value ops in scalar known reg cases
In BPF_AND and BPF_OR alu cases we have this pattern when the src and dst
tnum is a constant.
1 dst_reg->var_off = tnum_[op](dst_reg->var_off, src_reg.var_off)
2 scalar32_min_max_[op]
3 if (known) return
4 scalar_min_max_[op]
5 if (known)
6 __mark_reg_known(dst_reg,
dst_reg->var_off.value [op] src_reg.var_off.value)
The result is in 1 we calculate the var_off value and store it in the
dst_reg. Then in 6 we duplicate this logic doing the op again on the
value.
The duplication comes from the the tnum_[op] handlers because they have
already done the value calcuation. For example this is tnum_and().
struct tnum tnum_and(struct tnum a, struct tnum b)
{
u64 alpha, beta, v;
alpha = a.value | a.mask;
beta = b.value | b.mask;
v = a.value & b.value;
return TNUM(v, alpha & beta & ~v);
}
So lets remove the redundant op calculation. Its confusing for readers
and unnecessary. Its also not harmful because those ops have the
property, r1 & r1 = r1 and r1 | r1 = r1.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
Martin KaFai Lau
|
1df8f55a37 |
bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
There is a constant need to add more fields into the bpf_tcp_sock for the bpf programs running at tc, sock_ops...etc. A current workaround could be to use bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to do bpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from the tcp_sock. This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose func_proto returns a btf_id. For example, the func_proto of bpf_skc_to_tcp_sock returns the btf_id of the kernel "struct tcp_sock". These helpers are also added to is_ptr_cast_function(). It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id. That will keep the ref-tracking works properly. The bpf_skc_to_* helpers are made available to most of the bpf prog types in filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap. This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will accept pointer obtained from skb->sk. Instead of specifying both arg_type and arg_btf_id in the same func_proto which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is always the same. Discussion in this thread: https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/ The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is expecting a PTR_TO_BTF_ID which could be NULL. This is the same behavior as the existing helper taking ARG_PTR_TO_BTF_ID. The _SOCK_COMMON part means the helper is also expecting the legacy SOCK_COMMON pointer. By excluding the _OR_NULL part, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load. [ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take the PTR_TO_BTF_ID returned by the bpf_skc_to_*() helpers. The only special case is bpf_sk_lookup_assign() which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ] [ When converting the older helpers that take ARG_PTR_TO_SOCK* in the later patch, if the kernel does not support BTF, ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON because no reg->type could have PTR_TO_BTF_ID in this case. It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ] Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000350.3855720-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
a968d5e277 |
bpf: Move the PTR_TO_BTF_ID check to check_reg_type()
check_reg_type() checks whether a reg can be used as an arg of a func_proto. For PTR_TO_BTF_ID, the check is actually not completely done until the reg->btf_id is pointing to a kernel struct that is acceptable by the func_proto. Thus, this patch moves the btf_id check into check_reg_type(). "arg_type" and "arg_btf_id" are passed to check_reg_type() instead of "compatible". The compatible_reg_types[] usage is localized in check_reg_type() now. The "if (!btf_id) verbose(...); " is also removed since it won't happen. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000344.3854828-1-kafai@fb.com |
|
|
David S. Miller
|
6d772f328d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-09-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 95 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 4211 insertions(+), 2040 deletions(-). The main changes are: 1) Full multi function support in libbpf, from Andrii. 2) Refactoring of function argument checks, from Lorenz. 3) Make bpf_tail_call compatible with functions (subprograms), from Maciej. 4) Program metadata support, from YiFei. 5) bpf iterator optimizations, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Lorenz Bauer
|
0789e13bc3 |
bpf: Explicitly size compatible_reg_types
Arrays with designated initializers have an implicit length of the highest initialized value plus one. I used this to ensure that newly added entries in enum bpf_reg_type get a NULL entry in compatible_reg_types. This is difficult to understand since it requires knowledge of the peculiarities of designated initializers. Use __BPF_ARG_TYPE_MAX to size the array instead. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200923160156.80814-1-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
f79e7ea571 |
bpf: Use a table to drive helper arg type checks
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big
hairy if statement that is hard to follow. The debug output also leaves
to be desired: if a reg_type doesn't match we only print one of the
options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type
checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
|
|
|
Lorenz Bauer
|
fd1b0d604c |
bpf: Hoist type checking for nullable arg types
check_func_arg has a plethora of weird if statements with empty branches. They work around the fact that *_OR_NULL argument types should accept a SCALAR_VALUE register, as long as it's value is 0. These statements make it difficult to reason about the type checking logic. Instead, skip more detailed type checking logic iff the register is 0, and the function expects a nullable type. This allows simplifying the type checking itself. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-11-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
c18f0b6aee |
bpf: Check ARG_PTR_TO_SPINLOCK register type in check_func_arg
Move the check for PTR_TO_MAP_VALUE to check_func_arg, where all other checking is done as well. Move the invocation of process_spin_lock away from the register type checking, to allow a future refactoring. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-10-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
a2bbe7cc90 |
bpf: Set meta->raw_mode for pointers close to use
If we encounter a pointer to memory, we set meta->raw_mode depending on the type of memory we point at. What isn't obvious is that this information is only used when the next memory size argument is encountered. Move the assignment closer to where it's used, and add a comment that explains what is going on. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-9-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
feec704016 |
bpf: Make context access check generic
Always check context access if the register we're operating on is PTR_TO_CTX, rather than relying on ARG_PTR_TO_CTX. This allows simplifying the arg_type checking section of the function. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-8-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
02f7c9585d |
bpf: Make reference tracking generic
Instead of dealing with reg->ref_obj_id individually for every arg type that needs it, rely on the fact that ref_obj_id is zero if the register is not reference tracked. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-7-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
d7b9454a4f |
bpf: Make BTF pointer type checking generic
Perform BTF type checks if the register we're working on contains a BTF pointer, rather than if the argument is for a BTF pointer. This is easier to understand, and allows removing the code from the arg_type checking section of the function. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-6-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
9436ef6e86 |
bpf: Allow specifying a BTF ID per argument in function protos
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of IDs, one for each argument. This array is only accessed up to the highest numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id is a function pointer that is called by the verifier if present. It gets the actual BTF ID of the register, and the argument number we're currently checking. It turns out that the only user check_arg_btf_id ignores the argument, and is simply used to check whether the BTF ID has a struct sock_common at it's start. Replace both of these mechanisms with an explicit BTF ID for each argument in a function proto. Thanks to btf_struct_ids_match this is very flexible: check_arg_btf_id can be replaced by requiring struct sock_common. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
0d004c020b |
bpf: Check scalar or invalid register in check_helper_mem_access
Move the check for a NULL or zero register to check_helper_mem_access. This makes check_stack_boundary easier to understand. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200921121227.255763-3-lmb@cloudflare.com |
|
|
Alexei Starovoitov
|
09b28d76ea |
bpf: Add abnormal return checks.
LD_[ABS|IND] instructions may return from the function early. bpf_tail_call pseudo instruction is either fallthrough or return. Allow them in the subprograms only when subprograms are BTF annotated and have scalar return types. Allow ld_abs and tail_call in the main program even if it calls into subprograms. In the past that was not ok to do for ld_abs, since it was JITed with special exit sequence. Since bpf_gen_ld_abs() was introduced the ld_abs looks like normal exit insn from JIT point of view, so it's safe to allow them in the main program. Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
Maciej Fijalkowski
|
e411901c0b |
bpf: allow for tailcalls in BPF subprograms for x64 JIT
Relax verifier's restriction that was meant to forbid tailcall usage when subprog count was higher than 1. Also, do not max out the stack depth of program that utilizes tailcalls. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Maciej Fijalkowski
|
ebf7d1f508 |
bpf, x64: rework pro/epilogue and tailcall handling in JIT
This commit serves two things:
1) it optimizes BPF prologue/epilogue generation
2) it makes possible to have tailcalls within BPF subprogram
Both points are related to each other since without 1), 2) could not be
achieved.
In [1], Alexei says:
"The prologue will look like:
nop5
xor eax,eax // two new bytes if bpf_tail_call() is used in this
// function
push rbp
mov rbp, rsp
sub rsp, rounded_stack_depth
push rax // zero init tail_call counter
variable number of push rbx,r13,r14,r15
Then bpf_tail_call will pop variable number rbx,..
and final 'pop rax'
Then 'add rsp, size_of_current_stack_frame'
jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov
rbp, rsp'
This way new function will set its own stack size and will init tail
call
counter with whatever value the parent had.
If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'.
Instead it would need to have 'nop2' in there."
Implement that suggestion.
Since the layout of stack is changed, tail call counter handling can not
rely anymore on popping it to rbx just like it have been handled for
constant prologue case and later overwrite of rbx with actual value of
rbx pushed to stack. Therefore, let's use one of the register (%rcx) that
is considered to be volatile/caller-saved and pop the value of tail call
counter in there in the epilogue.
Drop the BUILD_BUG_ON in emit_prologue and in
emit_bpf_tail_call_indirect where instruction layout is not constant
anymore.
Introduce new poke target, 'tailcall_bypass' to poke descriptor that is
dedicated for skipping the register pops and stack unwind that are
generated right before the actual jump to target program.
For case when the target program is not present, BPF program will skip
the pop instructions and nop5 dedicated for jmpq $target. An example of
such state when only R6 of callee saved registers is used by program:
ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4
ffffffffc0513aa6: 5b pop %rbx
ffffffffc0513aa7: 58 pop %rax
ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0513ab4: 48 89 df mov %rbx,%rdi
When target program is inserted, the jump that was there to skip
pops/nop5 will become the nop5, so CPU will go over pops and do the
actual tailcall.
One might ask why there simply can not be pushes after the nop5?
In the following example snippet:
ffffffffc037030c: 48 89 fb mov %rdi,%rbx
(...)
ffffffffc0370332: 5b pop %rbx
ffffffffc0370333: 58 pop %rax
ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp
ffffffffc0370347: 50 push %rax
ffffffffc0370348: 53 push %rbx
ffffffffc0370349: 48 89 df mov %rbx,%rdi
ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548
There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall
and jump target is not present. ctx is in %rbx register and BPF
subprogram that we will call into on ffffffffc037034c is relying on it,
e.g. it will pick ctx from there. Such code layout is therefore broken
as we would overwrite the content of %rbx with the value that was pushed
on the prologue. That is the reason for the 'bypass' approach.
Special care needs to be taken during the install/update/remove of
tailcall target. In case when target program is not present, the CPU
must not execute the pop instructions that precede the tailcall.
To address that, the following states can be defined:
A nop, unwind, nop
B nop, unwind, tail
C skip, unwind, nop
D skip, unwind, tail
A is forbidden (lead to incorrectness). The state transitions between
tailcall install/update/remove will work as follows:
First install tail call f: C->D->B(f)
* poke the tailcall, after that get rid of the skip
Update tail call f to f': B(f)->B(f')
* poke the tailcall (poke->tailcall_target) and do NOT touch the
poke->tailcall_bypass
Remove tail call: B(f')->C(f')
* poke->tailcall_bypass is poked back to jump, then we wait the RCU
grace period so that other programs will finish its execution and
after that we are safe to remove the poke->tailcall_target
Install new tail call (f''): C(f')->D(f'')->B(f'').
* same as first step
This way CPU can never be exposed to "unwind, tail" state.
Last but not least, when tailcalls get mixed with bpf2bpf calls, it
would be possible to encounter the endless loop due to clearing the
tailcall counter if for example we would use the tailcall3-like from BPF
selftests program that would be subprogram-based, meaning the tailcall
would be present within the BPF subprogram.
This test, broken down to particular steps, would do:
entry -> set tailcall counter to 0, bump it by 1, tailcall to func0
func0 -> call subprog_tail
(we are NOT skipping the first 11 bytes of prologue and this subprogram
has a tailcall, therefore we clear the counter...)
subprog -> do the same thing as entry
and then loop forever.
To address this, the idea is to go through the call chain of bpf2bpf progs
and look for a tailcall presence throughout whole chain. If we saw a single
tail call then each node in this call chain needs to be marked as a subprog
that can reach the tailcall. We would later feed the JIT with this info
and:
- set eax to 0 only when tailcall is reachable and this is the entry prog
- if tailcall is reachable but there's no tailcall in insns of currently
JITed prog then push rax anyway, so that it will be possible to
propagate further down the call chain
- finally if tailcall is reachable, then we need to precede the 'call'
insn with mov rax, [rbp - (stack_depth + 8)]
Tail call related cases from test_verifier kselftest are also working
fine. Sample BPF programs that utilize tail calls (sockex3, tracex5)
work properly as well.
[1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
Maciej Fijalkowski
|
7f6e4312e1 |
bpf: Limit caller's stack depth 256 for subprogs with tailcalls
Protect against potential stack overflow that might happen when bpf2bpf calls get combined with tailcalls. Limit the caller's stack depth for such case down to 256 so that the worst case scenario would result in 8k stack size (32 which is tailcall limit * 256 = 8k). Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Maciej Fijalkowski
|
a748c6975d |
bpf: propagate poke descriptors to subprograms
Previously, there was no need for poke descriptors being present in subprogram's bpf_prog_aux struct since tailcalls were simply not allowed in them. Each subprog is JITed independently so in order to enable JITing subprograms that use tailcalls, do the following: - in fixup_bpf_calls() store the index of tailcall insn onto the generated poke descriptor, - in case when insn patching occurs, adjust the tailcall insn idx from bpf_patch_insn_data, - then in jit_subprogs() check whether the given poke descriptor belongs to the current subprog by checking if that previously stored absolute index of tail call insn is in the scope of the insns of given subprog, - update the insn->imm with new poke descriptor slot so that while JITing the proper poke descriptor will be grabbed This way each of the main program's poke descriptors are distributed across the subprograms poke descriptor array, so main program's descriptors can be untracked out of the prog array map. Add also subprog's aux struct to the BPF map poke_progs list by calling on it map_poke_track(). In case of any error, call the map_poke_untrack() on subprog's aux structs that have already been registered to prog array map. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Yonghong Song
|
7c69673262 |
bpf: Permit map_ptr arithmetic with opcode add and offset 0
Commit
|
|
|
Jakub Kicinski
|
44a8c4f33c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit
|
|
|
Alexei Starovoitov
|
f56407fa6e |
bpf: Remove bpf_lsm_file_mprotect from sleepable list.
Technically the bpf programs can sleep while attached to bpf_lsm_file_mprotect, but such programs need to access user memory. So they're in might_fault() category. Which means they cannot be called from file_mprotect lsm hook that takes write lock on mm->mmap_lock. Adjust the test accordingly. Also add might_fault() to __bpf_prog_enter_sleepable() to catch such deadlocks early. Fixes: |
|
|
Alexei Starovoitov
|
29523c5e67 |
bpf: Fix build without BPF_LSM.
resolve_btfids doesn't like empty set. Add unused ID when BPF_LSM is off.
Fixes:
|
|
|
Alexei Starovoitov
|
1e6c62a882 |
bpf: Introduce sleepable BPF programs
Introduce sleepable BPF programs that can request such property for themselves via BPF_F_SLEEPABLE flag at program load time. In such case they will be able to use helpers like bpf_copy_from_user() that might sleep. At present only fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only when they are attached to kernel functions that are known to allow sleeping. The non-sleepable programs are relying on implicit rcu_read_lock() and migrate_disable() to protect life time of programs, maps that they use and per-cpu kernel structures used to pass info between bpf programs and the kernel. The sleepable programs cannot be enclosed into rcu_read_lock(). migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs should not be enclosed in migrate_disable() as well. Therefore rcu_read_lock_trace is used to protect the life time of sleepable progs. There are many networking and tracing program types. In many cases the 'struct bpf_prog *' pointer itself is rcu protected within some other kernel data structure and the kernel code is using rcu_dereference() to load that program pointer and call BPF_PROG_RUN() on it. All these cases are not touched. Instead sleepable bpf programs are allowed with bpf trampoline only. The program pointers are hard-coded into generated assembly of bpf trampoline and synchronize_rcu_tasks_trace() is used to protect the life time of the program. The same trampoline can hold both sleepable and non-sleepable progs. When rcu_read_lock_trace is held it means that some sleepable bpf program is running from bpf trampoline. Those programs can use bpf arrays and preallocated hash/lru maps. These map types are waiting on programs to complete via synchronize_rcu_tasks_trace(); Updates to trampoline now has to do synchronize_rcu_tasks_trace() and synchronize_rcu_tasks() to wait for sleepable progs to finish and for trampoline assembly to finish. This is the first step of introducing sleepable progs. Eventually dynamically allocated hash maps can be allowed and networking program types can become sleepable too. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com |
|
|
Yonghong Song
|
2921c90d47 |
bpf: Fix a verifier failure with xor
bpf selftest test_progs/test_sk_assign failed with llvm 11 and llvm 12.
Compared to llvm 10, llvm 11 and 12 generates xor instruction which
is not handled properly in verifier. The following illustrates the
problem:
16: (b4) w5 = 0
17: ... R5_w=inv0 ...
...
132: (a4) w5 ^= 1
133: ... R5_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
...
37: (bc) w8 = w5
38: ... R5=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
R8_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
...
41: (bc) w3 = w8
42: ... R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
45: (56) if w3 != 0x0 goto pc+1
... R3_w=inv0 ...
46: (b7) r1 = 34
47: R1_w=inv34 R7=pkt(id=0,off=26,r=38,imm=0)
47: (0f) r7 += r1
48: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
48: (b4) w9 = 0
49: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
49: (69) r1 = *(u16 *)(r7 +0)
invalid access to packet, off=60 size=2, R7(id=0,off=60,r=38)
R7 offset is outside of the packet
At above insn 132, w5 = 0, but after w5 ^= 1, we give a really conservative
value of w5. At insn 45, in reality the condition should be always false.
But due to conservative value for w3, the verifier evaluates it could be
true and this later leads to verifier failure complaining potential
packet out-of-bound access.
This patch implemented proper XOR support in verifier.
In the above example, we have:
132: R5=invP0
132: (a4) w5 ^= 1
133: R5_w=invP1
...
37: (bc) w8 = w5
...
41: (bc) w3 = w8
42: R3_w=invP1
...
45: (56) if w3 != 0x0 goto pc+1
47: R3_w=invP1
...
processed 353 insns ...
and the verifier can verify the program successfully.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064608.2017937-1-yhs@fb.com
|
|
Udip Pant
|
7e40781cc8 |
bpf: verifier: Use target program's type for access verifications
This patch adds changes in verifier to make decisions such as granting
of read / write access or enforcement of return code status based on
the program type of the target program while using dynamic program
extension (of type BPF_PROG_TYPE_EXT).
The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB
and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a
placeholder for those, we need this extended check for those extended
programs to actually work with proper access, while using this option.
Specifically, it introduces following changes:
- may_access_direct_pkt_data:
allow access to packet data based on the target prog
- check_return_code:
enforce return code based on the target prog
(currently, this check is skipped for EXT program)
- check_ld_abs:
check for 'may_access_skb' based on the target prog
- check_map_prog_compatibility:
enforce the map compatibility check based on the target prog
- may_update_sockmap:
allow sockmap update based on the target prog
Some other occurrences of prog->type is left as it without replacing
with the 'resolved' type:
- do_check_common() and check_attach_btf_id():
already have specific logic to handle the EXT prog type
- jit_subprogs() and bpf_check():
Not changed for jit compilation or while inferring env->ops
Next few patches in this series include selftests for some of these cases.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-2-udippant@fb.com
|
|
Jiri Olsa
|
eae2e83e62 |
bpf: Add BTF_SET_START/END macros
Adding support to define sorted set of BTF ID values. Following defines sorted set of BTF ID values: BTF_SET_START(btf_allowlist_d_path) BTF_ID(func, vfs_truncate) BTF_ID(func, vfs_fallocate) BTF_ID(func, dentry_open) BTF_ID(func, vfs_getattr) BTF_ID(func, filp_close) BTF_SET_END(btf_allowlist_d_path) It defines following 'struct btf_id_set' variable to access values and count: struct btf_id_set btf_allowlist_d_path; Adding 'allowed' callback to struct bpf_func_proto, to allow verifier the check on allowed callers. Adding btf_id_set_contains function, which will be used by allowed callbacks to verify the caller's BTF ID value is within allowed set. Also removing extra '\' in __BTF_ID_LIST macro. Added BTF_SET_START_GLOBAL macro for global sets. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org |
|
|
Jiri Olsa
|
faaf4a790d |
bpf: Add btf_struct_ids_match function
Adding btf_struct_ids_match function to check if given address provided
by BTF object + offset is also address of another nested BTF object.
This allows to pass an argument to helper, which is defined via parent
BTF object + offset, like for bpf_d_path (added in following changes):
SEC("fentry/filp_close")
int BPF_PROG(prog_close, struct file *file, void *id)
{
...
ret = bpf_d_path(&file->f_path, ...
The first bpf_d_path argument is hold by verifier as BTF file object
plus offset of f_path member.
The btf_struct_ids_match function will walk the struct file object and
check if there's nested struct path object on the given offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-9-jolsa@kernel.org
|
|
|
KP Singh
|
8ea636848a |
bpf: Implement bpf_local_storage for inodes
Similar to bpf_local_storage for sockets, add local storage for inodes. The life-cycle of storage is managed with the life-cycle of the inode. i.e. the storage is destroyed along with the owning inode. The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the security blob which are now stackable and can co-exist with other LSMs. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org |
|
|
Gustavo A. R. Silva
|
df561f6688 |
treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> |
|
|
Lorenz Bauer
|
0126240f44 |
bpf: sockmap: Allow update from BPF
Allow calling bpf_map_update_elem on sockmap and sockhash from a BPF context. The synchronization required for this is a bit fiddly: we need to prevent the socket from changing its state while we add it to the sockmap, since we rely on getting a callback via sk_prot->unhash. However, we can't just lock_sock like in sock_map_sk_acquire because that might sleep. So instead we disable softirq processing and use bh_lock_sock to prevent further modification. Yet, this is still not enough. BPF can be called in contexts where the current CPU might have locked a socket. If the BPF can get a hold of such a socket, inserting it into a sockmap would lead to a deadlock. One straight forward example are sock_ops programs that have ctx->sk, but the same problem exists for kprobes, etc. We deal with this by allowing sockmap updates only from known safe contexts. Improper usage is rejected by the verifier. I've audited the enabled contexts to make sure they can't run in a locked context. It's possible that CGROUP_SKB and others are safe as well, but the auditing here is much more difficult. In any case, we can extend the safe contexts when the need arises. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-6-lmb@cloudflare.com |
|
|
Lorenz Bauer
|
912f442cfb |
bpf: Override the meaning of ARG_PTR_TO_MAP_VALUE for sockmap and sockhash
The verifier assumes that map values are simple blobs of memory, and therefore treats ARG_PTR_TO_MAP_VALUE, etc. as such. However, there are map types where this isn't true. For example, sockmap and sockhash store sockets. In general this isn't a big problem: we can just write helpers that explicitly requests PTR_TO_SOCKET instead of ARG_PTR_TO_MAP_VALUE. The one exception are the standard map helpers like map_update_elem, map_lookup_elem, etc. Here it would be nice we could overload the function prototype for different kinds of maps. Unfortunately, this isn't entirely straight forward: We only know the type of the map once we have resolved meta->map_ptr in check_func_arg. This means we can't swap out the prototype in check_helper_call until we're half way through the function. Instead, modify check_func_arg to treat ARG_PTR_TO_MAP_VALUE to mean "the native type for the map" instead of "pointer to memory" for sockmap and sockhash. This means we don't have to modify the function prototype at all Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-5-lmb@cloudflare.com |
|
|
Randy Dunlap
|
b8c1a30907 |
bpf: Delete repeated words in comments
Drop repeated words in kernel/bpf/: {has, the}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200807033141.10437-1-rdunlap@infradead.org
|
|
|
Yonghong Song
|
4fc00b79b8 |
bpf: Add missing newline characters in verifier error messages
Newline characters are added in two verifier error messages,
refactored in Commit
|
|
Colin Ian King
|
f6dfbe31e8 |
bpf: Fix swapped arguments in calls to check_buffer_access
There are a couple of arguments of the boolean flag zero_size_allowed and
the char pointer buf_info when calling to function check_buffer_access that
are swapped by mistake. Fix these by swapping them to correct the argument
ordering.
Fixes:
|
|
Song Liu
|
5d99cb2c86 |
bpf: Fail PERF_EVENT_IOC_SET_BPF when bpf_get_[stack|stackid] cannot work
bpf_get_[stack|stackid] on perf_events with precise_ip uses callchain attached to perf_sample_data. If this callchain is not presented, do not allow attaching BPF program that calls bpf_get_[stack|stackid] to this event. In the error case, -EPROTO is returned so that libbpf can identify this error and print proper hint message. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723180648.1429892-3-songliubraving@fb.com |
|
|
Yonghong Song
|
afbf21dce6 |
bpf: Support readonly/readwrite buffers in verifier
Readonly and readwrite buffer register states are introduced. Totally four states, PTR_TO_RDONLY_BUF[_OR_NULL] and PTR_TO_RDWR_BUF[_OR_NULL] are supported. As suggested by their respective names, PTR_TO_RDONLY_BUF[_OR_NULL] are for readonly buffers and PTR_TO_RDWR_BUF[_OR_NULL] for read/write buffers. These new register states will be used by later bpf map element iterator. New register states share some similarity to PTR_TO_TP_BUFFER as it will calculate accessed buffer size during verification time. The accessed buffer size will be later compared to other metrics during later attach/link_create time. Similar to reg_state PTR_TO_BTF_ID_OR_NULL in bpf iterator programs, PTR_TO_RDONLY_BUF_OR_NULL or PTR_TO_RDWR_BUF_OR_NULL reg_types can be set at prog->aux->bpf_ctx_arg_aux, and bpf verifier will retrieve the values during btf_ctx_access(). Later bpf map element iterator implementation will show how such information will be assigned during target registeration time. The verifier is also enhanced such that PTR_TO_RDONLY_BUF can be passed to ARG_PTR_TO_MEM[_OR_NULL] helper argument, and PTR_TO_RDWR_BUF can be passed to ARG_PTR_TO_MEM[_OR_NULL] or ARG_PTR_TO_UNINIT_MEM. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200723184111.590274-1-yhs@fb.com |
|
Jakub Sitnicki
|
e9ddbb7707 |
bpf: Introduce SK_LOOKUP program type with a dedicated attach point
Add a new program type BPF_PROG_TYPE_SK_LOOKUP with a dedicated attach type
BPF_SK_LOOKUP. The new program kind is to be invoked by the transport layer
when looking up a listening socket for a new connection request for
connection oriented protocols, or when looking up an unconnected socket for
a packet for connection-less protocols.
When called, SK_LOOKUP BPF program can select a socket that will receive
the packet. This serves as a mechanism to overcome the limits of what
bind() API allows to express. Two use-cases driving this work are:
(1) steer packets destined to an IP range, on fixed port to a socket
192.0.2.0/24, port 80 -> NGINX socket
(2) steer packets destined to an IP address, on any port to a socket
198.51.100.1, any port -> L7 proxy socket
In its run-time context program receives information about the packet that
triggered the socket lookup. Namely IP version, L4 protocol identifier, and
address 4-tuple. Context can be further extended to include ingress
interface identifier.
To select a socket BPF program fetches it from a map holding socket
references, like SOCKMAP or SOCKHASH, and calls bpf_sk_assign(ctx, sk, ...)
helper to record the selection. Transport layer then uses the selected
socket as a result of socket lookup.
In its basic form, SK_LOOKUP acts as a filter and hence must return either
SK_PASS or SK_DROP. If the program returns with SK_PASS, transport should
look for a socket to receive the packet, or use the one selected by the
program if available, while SK_DROP informs the transport layer that the
lookup should fail.
This patch only enables the user to attach an SK_LOOKUP program to a
network namespace. Subsequent patches hook it up to run on local delivery
path in ipv4 and ipv6 stacks.
Suggested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-3-jakub@cloudflare.com
|
|
|
David S. Miller
|
71930d6102 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Song Liu
|
fa28dcb82a |
bpf: Introduce helper bpf_get_task_stack()
Introduce helper bpf_get_task_stack(), which dumps stack trace of given task. This is different to bpf_get_stack(), which gets stack track of current task. One potential use case of bpf_get_task_stack() is to call it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file. bpf_get_task_stack() uses stack_trace_save_tsk() instead of get_perf_callchain() for kernel stack. The benefit of this choice is that stack_trace_save_tsk() doesn't require changes in arch/. The downside of using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the stack trace to unsigned long array. For 32-bit systems, we need to translate it to u64 array. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com |
|
|
Yonghong Song
|
01c66c48d4 |
bpf: Fix an incorrect branch elimination by verifier
Wenbo reported an issue in [1] where a checking of null
pointer is evaluated as always false. In this particular
case, the program type is tp_btf and the pointer to
compare is a PTR_TO_BTF_ID.
The current verifier considers PTR_TO_BTF_ID always
reprents a non-null pointer, hence all PTR_TO_BTF_ID compares
to 0 will be evaluated as always not-equal, which resulted
in the branch elimination.
For example,
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
int BPF_PROG(test8, struct bpf_fentry_test_t *arg)
{
if (arg->a == 0)
test8_result = 1;
return 0;
}
In above bpf programs, both branch arg == 0 and arg->a == 0
are removed. This may not be what developer expected.
The bug is introduced by Commit
|
|
|
Yonghong Song
|
af7ec13833 |
bpf: Add bpf_skc_to_tcp6_sock() helper
The helper is used in tracing programs to cast a socket pointer to a tcp6_sock pointer. The return value could be NULL if the casting is illegal. A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added so the verifier is able to deduce proper return types for the helper. Different from the previous BTF_ID based helpers, the bpf_skc_to_tcp6_sock() argument can be several possible btf_ids. More specifically, all possible socket data structures with sock_common appearing in the first in the memory layout. This patch only added socket types related to tcp and udp. All possible argument btf_id and return value btf_id for helper bpf_skc_to_tcp6_sock() are pre-calculcated and cached. In the future, it is even possible to precompute these btf_id's at kernel build time. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com |
|
|
Yonghong Song
|
c4c0bdc0d2 |
bpf: Set the number of exception entries properly for subprograms
Currently, if a bpf program has more than one subprograms, each program will be
jitted separately. For programs with bpf-to-bpf calls the
prog->aux->num_exentries is not setup properly. For example, with
bpf_iter_netlink.c modified to force one function to be not inlined and with
CONFIG_BPF_JIT_ALWAYS_ON the following error is seen:
$ ./test_progs -n 3/3
...
libbpf: failed to load program 'iter/netlink'
libbpf: failed to load object 'bpf_iter_netlink'
libbpf: failed to load BPF skeleton 'bpf_iter_netlink': -4007
test_netlink:FAIL:bpf_iter_netlink__open_and_load skeleton open_and_load failed
#3/3 netlink:FAIL
The dmesg shows the following errors:
ex gen bug
which is triggered by the following code in arch/x86/net/bpf_jit_comp.c:
if (excnt >= bpf_prog->aux->num_exentries) {
pr_err("ex gen bug\n");
return -EFAULT;
}
This patch fixes the issue by computing proper num_exentries for each
subprogram before calling JIT.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Andrey Ignatov
|
41c48f3a98 |
bpf: Support access to bpf map fields
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
|
|
|
Yonghong Song
|
6c6935419e |
bpf: Avoid verifier failure for 32bit pointer arithmetic
When do experiments with llvm (disabling instcombine and simplifyCFG), I hit the following error with test_seg6_loop.o. ; R1=pkt(id=0,off=0,r=48,imm=0), R7=pkt(id=0,off=40,r=48,imm=0) w2 = w7 ; R2_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) w2 -= w1 R2 32-bit pointer arithmetic prohibited The corresponding source code is: uint32_t srh_off // srh and skb->data are all packet pointers srh_off = (char *)srh - (char *)(long)skb->data; The verifier does not support 32-bit pointer/scalar arithmetic. Without my llvm change, the code looks like ; R3=pkt(id=0,off=40,r=48,imm=0), R8=pkt(id=0,off=0,r=48,imm=0) w3 -= w8 ; R3_w=inv(id=0) This is explicitly allowed in verifier if both registers are pointers and the opcode is BPF_SUB. To fix this problem, I changed the verifier to allow 32-bit pointer/scaler BPF_SUB operations. At the source level, the issue could be workarounded with inline asm or changing "uint32_t srh_off" to "uint64_t srh_off". But I feel that verifier change might be the right thing to do. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200618234631.3321118-1-yhs@fb.com |
|
Dan Carpenter
|
e7ed83d6fa |
bpf: Fix an error code in check_btf_func()
This code returns success if the "info_aux" allocation fails but it
should return -ENOMEM.
Fixes:
|
|
Andrii Nakryiko
|
457f44363a |
bpf: Implement BPF ring buffer and verifier support for it
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
|
David S. Miller
|
1806c13dc2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
John Fastabend
|
3a71dc366d |
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
With the latest trunk llvm (llvm 11), I hit a verifier issue for
test_prog subtest test_verif_scale1.
The following simplified example illustrate the issue:
w9 = 0 /* R9_w=inv0 */
r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */
r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */
......
w2 = w9 /* R2_w=inv0 */
r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r6 += r2 /* R6_w=inv(id=0) */
r3 = r6 /* R3_w=inv(id=0) */
r3 += 14 /* R3_w=inv(id=0) */
if r3 > r8 goto end
r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */
<== error here: R6 invalid mem access 'inv'
...
end:
In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in
different basic blocks.
In the above, after "r6 += r2", r6 becomes a scalar, which eventually
caused the memory access error. The correct register state should be
a pkt pointer.
The inprecise register state starts at "w2 = w9".
The 32bit register w9 is 0, in __reg_assign_32_into_64(),
the 64bit reg->smax_value is assigned to be U32_MAX.
The 64bit reg->smin_value is 0 and the 64bit register
itself remains constant based on reg->var_off.
In adjust_ptr_min_max_vals(), the verifier checks for a known constant,
smin_val must be equal to smax_val. Since they are not equal,
the verifier decides r6 is a unknown scalar, which caused later failure.
The llvm10 does not have this issue as it generates different code:
w9 = 0 /* R9_w=inv0 */
r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */
r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */
......
r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */
r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */
r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */
if r3 > r8 goto end
...
To fix the above issue, we can include zero in the test condition for
assigning the s32_max_value and s32_min_value to their 64-bit equivalents
smax_value and smin_value.
Further, fix the condition to avoid doing zero extension bounds checks
when s32_min_value <= 0. This could allow for the case where bounds
32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds.
When in-fact the -1 min value needs to force U32_MAX bound.
Fixes:
|
|
|
Alexei Starovoitov
|
18644cec71 |
bpf: Fix use-after-free in fmod_ret check
Fix the following issue:
[ 436.749342] BUG: KASAN: use-after-free in bpf_trampoline_put+0x39/0x2a0
[ 436.749995] Write of size 4 at addr ffff8881ef38b8a0 by task kworker/3:5/2243
[ 436.750712]
[ 436.752677] Workqueue: events bpf_prog_free_deferred
[ 436.753183] Call Trace:
[ 436.756483] bpf_trampoline_put+0x39/0x2a0
[ 436.756904] bpf_prog_free_deferred+0x16d/0x3d0
[ 436.757377] process_one_work+0x94a/0x15b0
[ 436.761969]
[ 436.762130] Allocated by task 2529:
[ 436.763323] bpf_trampoline_lookup+0x136/0x540
[ 436.763776] bpf_check+0x2872/0xa0a8
[ 436.764144] bpf_prog_load+0xb6f/0x1350
[ 436.764539] __do_sys_bpf+0x16d7/0x3720
[ 436.765825]
[ 436.765988] Freed by task 2529:
[ 436.767084] kfree+0xc6/0x280
[ 436.767397] bpf_trampoline_put+0x1fd/0x2a0
[ 436.767826] bpf_check+0x6832/0xa0a8
[ 436.768197] bpf_prog_load+0xb6f/0x1350
[ 436.768594] __do_sys_bpf+0x16d7/0x3720
prog->aux->trampoline = tr should be set only when prog is valid.
Otherwise prog freeing will try to put trampoline via prog->aux->trampoline,
but it may not point to a valid trampoline.
Fixes:
|
|
|
John Fastabend
|
cac616db39 |
bpf: Verifier track null pointer branch_taken with JNE and JEQ
Currently, when considering the branches that may be taken for a jump
instruction if the register being compared is a pointer the verifier
assumes both branches may be taken. But, if the jump instruction
is comparing if a pointer is NULL we have this information in the
verifier encoded in the reg->type so we can do better in these cases.
Specifically, these two common cases can be handled.
* If the instruction is BPF_JEQ and we are comparing against a
zero value. This test is 'if ptr == 0 goto +X' then using the
type information in reg->type we can decide if the ptr is not
null. This allows us to avoid pushing both branches onto the
stack and instead only use the != 0 case. For example
PTR_TO_SOCK and PTR_TO_SOCK_OR_NULL encode the null pointer.
Note if the type is PTR_TO_SOCK_OR_NULL we can not learn anything.
And also if the value is non-zero we learn nothing because it
could be any arbitrary value a different pointer for example
* If the instruction is BPF_JNE and ware comparing against a zero
value then a similar analysis as above can be done. The test in
asm looks like 'if ptr != 0 goto +X'. Again using the type
information if the non null type is set (from above PTR_TO_SOCK)
we know the jump is taken.
In this patch we extend is_branch_taken() to consider this extra
information and to return only the branch that will be taken. This
resolves a verifier issue reported with C code like the following.
See progs/test_sk_lookup_kern.c in selftests.
sk = bpf_sk_lookup_tcp(skb, tuple, tuple_len, BPF_F_CURRENT_NETNS, 0);
bpf_printk("sk=%d\n", sk ? 1 : 0);
if (sk)
bpf_sk_release(sk);
return sk ? TC_ACT_OK : TC_ACT_UNSPEC;
In the above the bpf_printk() will resolve the pointer from
PTR_TO_SOCK_OR_NULL to PTR_TO_SOCK. Then the second test guarding
the release will cause the verifier to walk both paths resulting
in the an unreleased sock reference. See verifier/ref_tracking.c
in selftests for an assembly version of the above.
After the above additional logic is added the C code above passes
as expected.
Reported-by: Andrey Ignatov <rdna@fb.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159009164651.6313.380418298578070501.stgit@john-Precision-5820-Tower
|
|
|
Daniel Borkmann
|
1b66d25361 |
bpf: Add get{peer, sock}name attach types for sock_addr
As stated in
|
|
|
Daniel Borkmann
|
2ec0616e87 |
bpf: Fix check_return_code to only allow [0,1] in trace_iter progs
As per |
|
|
David S. Miller
|
da07f52d3c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
2c78ee898d |
bpf: Implement CAP_BPF
Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com |
|
|
Daniel Borkmann
|
47cc0ed574 |
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
Given bpf_probe_read{,str}() BPF helpers are now only available under
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, we need to add the drop-in
replacements of bpf_probe_read_{kernel,user}_str() to do_refine_retval_range()
as well to avoid hitting the same issue as in
|
|
|
Yonghong Song
|
e92888c72f |
bpf: Enforce returning 0 for fentry/fexit progs
Currently, tracing/fentry and tracing/fexit prog
return values are not enforced. In trampoline codes,
the fentry/fexit prog return values are ignored.
Let us enforce it to be 0 to avoid confusion and
allows potential future extension.
This patch also explicitly added return value
checking for tracing/raw_tp, tracing/fmod_ret,
and freplace programs such that these program
return values can be anything. The purpose are
two folds:
1. to make it explicit about return value expectations
for these programs in verifier.
2. for tracing prog_type, if a future attach type
is added, the default is -ENOTSUPP which will
enforce to specify return value ranges explicitly.
Fixes:
|
|
|
Yonghong Song
|
3c32cc1bce |
bpf: Enable bpf_iter targets registering ctx argument types
Commit
|
|
|
Yonghong Song
|
1d68f22b3d |
bpf: Handle spilled PTR_TO_BTF_ID properly when checking stack_boundary
This specifically to handle the case like below:
// ptr below is a socket ptr identified by PTR_TO_BTF_ID
u64 param[2] = { ptr, val };
bpf_seq_printf(seq, fmt, sizeof(fmt), param, sizeof(param));
In this case, the 16 bytes stack for "param" contains:
8 bytes for ptr with spilled PTR_TO_BTF_ID
8 bytes for val as STACK_MISC
The current verifier will complain the ptr should not be visible
to the helper.
...
16: (7b) *(u64 *)(r10 -64) = r2
18: (7b) *(u64 *)(r10 -56) = r1
19: (bf) r4 = r10
;
20: (07) r4 += -64
; BPF_SEQ_PRINTF(seq, fmt1, (long)s, s->sk_protocol);
21: (bf) r1 = r6
22: (18) r2 = 0xffffa8d00018605a
24: (b4) w3 = 10
25: (b4) w5 = 16
26: (85) call bpf_seq_printf#125
R0=inv(id=0) R1_w=ptr_seq_file(id=0,off=0,imm=0)
R2_w=map_value(id=0,off=90,ks=4,vs=144,imm=0) R3_w=inv10
R4_w=fp-64 R5_w=inv16 R6=ptr_seq_file(id=0,off=0,imm=0)
R7=ptr_netlink_sock(id=0,off=0,imm=0) R10=fp0 fp-56_w=mmmmmmmm
fp-64_w=ptr_
last_idx 26 first_idx 13
regs=8 stack=0 before 25: (b4) w5 = 16
regs=8 stack=0 before 24: (b4) w3 = 10
invalid indirect read from stack off -64+0 size 16
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175915.2476783-1-yhs@fb.com
|
|
|
Yonghong Song
|
b121b341e5 |
bpf: Add PTR_TO_BTF_ID_OR_NULL support
Add bpf_reg_type PTR_TO_BTF_ID_OR_NULL support.
For tracing/iter program, the bpf program context
definition, e.g., for previous bpf_map target, looks like
struct bpf_iter__bpf_map {
struct bpf_iter_meta *meta;
struct bpf_map *map;
};
The kernel guarantees that meta is not NULL, but
map pointer maybe NULL. The NULL map indicates that all
objects have been traversed, so bpf program can take
proper action, e.g., do final aggregation and/or send
final report to user space.
Add btf_id_or_null_non0_off to prog->aux structure, to
indicate that if the context access offset is not 0,
set to PTR_TO_BTF_ID_OR_NULL instead of PTR_TO_BTF_ID.
This bit is set for tracing/iter program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175912.2476576-1-yhs@fb.com
|
|
|
Yonghong Song
|
15d83c4d7c |
bpf: Allow loading of a bpf_iter program
A bpf_iter program is a tracing program with attach type
BPF_TRACE_ITER. The load attribute
attach_btf_id
is used by the verifier against a particular kernel function,
which represents a target, e.g., __bpf_iter__bpf_map
for target bpf_map which is implemented later.
The program return value must be 0 or 1 for now.
0 : successful, except potential seq_file buffer overflow
which is handled by seq_file reader.
1 : request to restart the same object
In the future, other return values may be used for filtering or
teminating the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
|
|
|
Jakub Sitnicki
|
64d85290d7 |
bpf: Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH
White-list map lookup for SOCKMAP/SOCKHASH from BPF. Lookup returns a
pointer to a full socket and acquires a reference if necessary.
To support it we need to extend the verifier to know that:
(1) register storing the lookup result holds a pointer to socket, if
lookup was done on SOCKMAP/SOCKHASH, and that
(2) map lookup on SOCKMAP/SOCKHASH is a reference acquiring operation,
which needs a corresponding reference release with bpf_sk_release.
On sock_map side, lookup handlers exposed via bpf_map_ops now bump
sk_refcnt if socket is reference counted. In turn, bpf_sk_select_reuseport,
the only in-kernel user of SOCKMAP/SOCKHASH ops->map_lookup_elem, was
updated to release the reference.
Sockets fetched from a map can be used in the same way as ones returned by
BPF socket lookup helpers, such as bpf_sk_lookup_tcp. In particular, they
can be used with bpf_sk_assign to direct packets toward a socket on TC
ingress path.
Suggested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-2-jakub@cloudflare.com
|
|
|
Andrii Nakryiko
|
f2e10bff16 |
bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command. Also enhance show_fdinfo to potentially include bpf_link type-specific information (similarly to obj_info). Also introduce enum bpf_link_type stored in bpf_link itself and expose it in UAPI. bpf_link_tracing also now will store and return bpf_attach_type. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com |
|
|
Andrii Nakryiko
|
6f8a57ccf8 |
bpf: Make verifier log more relevant by default
To make BPF verifier verbose log more releavant and easier to use to debug
verification failures, "pop" parts of log that were successfully verified.
This has effect of leaving only verifier logs that correspond to code branches
that lead to verification failure, which in practice should result in much
shorter and more relevant verifier log dumps. This behavior is made the
default behavior and can be overriden to do exhaustive logging by specifying
BPF_LOG_LEVEL2 log level.
Using BPF_LOG_LEVEL2 to disable this behavior is not ideal, because in some
cases it's good to have BPF_LOG_LEVEL2 per-instruction register dump
verbosity, but still have only relevant verifier branches logged. But for this
patch, I didn't want to add any new flags. It might be worth-while to just
rethink how BPF verifier logging is performed and requested and streamline it
a bit. But this trimming of successfully verified branches seems to be useful
and a good default behavior.
To test this, I modified runqslower slightly to introduce read of
uninitialized stack variable. Log (**truncated in the middle** to save many
lines out of this commit message) BEFORE this change:
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
[ ... instruction dump from insn #7 through #50 are cut out ... ]
51: (b7) r2 = 16
52: (85) call bpf_get_current_comm#16
last_idx 52 first_idx 42
regs=4 stack=0 before 51: (b7) r2 = 16
; bpf_perf_event_output(ctx, &events, BPF_F_CURRENT_CPU,
53: (bf) r1 = r6
54: (18) r2 = 0xffff8881f3868800
56: (18) r3 = 0xffffffff
58: (bf) r4 = r7
59: (b7) r5 = 32
60: (85) call bpf_perf_event_output#25
last_idx 60 first_idx 53
regs=20 stack=0 before 59: (b7) r5 = 32
61: (bf) r2 = r10
; event.pid = pid;
62: (07) r2 += -16
; bpf_map_delete_elem(&start, &pid);
63: (18) r1 = 0xffff8881f3868000
65: (85) call bpf_map_delete_elem#3
; }
66: (b7) r0 = 0
67: (95) exit
from 44 to 66: safe
from 34 to 66: safe
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881f3868000
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how there is a successful code path from instruction 0 through 67, few
successfully verified jumps (44->66, 34->66), and only after that 11->28 jump
plus error on instruction #32.
AFTER this change (full verifier log, **no truncation**):
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
7: (79) r2 = *(u64 *)(r1 +16)
; if (prev->state == TASK_RUNNING)
8: (55) if r2 != 0x0 goto pc+19
R1_w=ptr_task_struct(id=0,off=0,imm=0) R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; trace_enqueue(prev->tgid, prev->pid);
9: (61) r1 = *(u32 *)(r1 +1184)
10: (63) *(u32 *)(r10 -4) = r1
; if (!pid || (targ_pid && targ_pid != pid))
11: (15) if r1 == 0x0 goto pc+16
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881db3ce800
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how in this case, there are 0-11 instructions + jump from 11 to
28 is recorded + 28-32 instructions with error on insn #32.
test_verifier test runner was updated to specify BPF_LOG_LEVEL2 for
VERBOSE_ACCEPT expected result due to potentially "incomplete" success verbose
log at BPF_LOG_LEVEL1.
On success, verbose log will only have a summary of number of processed
instructions, etc, but no branch tracing log. Having just a last succesful
branch tracing seemed weird and confusing. Having small and clean summary log
in success case seems quite logical and nice, though.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423195850.1259827-1-andriin@fb.com
|
|
Mao Wenan
|
b0b3fb6759 |
bpf: Remove set but not used variable 'dst_known'
Fixes gcc '-Wunused-but-set-variable' warning: kernel/bpf/verifier.c:5603:18: warning: variable ‘dst_known’ set but not used [-Wunused-but-set-variable], delete this variable. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200418013735.67882-1-maowenan@huawei.com |
|
|
Toke Høiland-Jørgensen
|
03f87c0b45 |
bpf: Propagate expected_attach_type when verifying freplace programs
For some program types, the verifier relies on the expected_attach_type of
the program being verified in the verification process. However, for
freplace programs, the attach type was not propagated along with the
verifier ops, so the expected_attach_type would always be zero for freplace
programs.
This in turn caused the verifier to sometimes make the wrong call for
freplace programs. For all existing uses of expected_attach_type for this
purpose, the result of this was only false negatives (i.e., freplace
functions would be rejected by the verifier even though they were valid
programs for the target they were replacing). However, should a false
positive be introduced, this can lead to out-of-bounds accesses and/or
crashes.
The fix introduced in this patch is to propagate the expected_attach_type
to the freplace program during verification, and reset it after that is
done.
Fixes:
|
|
Jann Horn
|
8ff3571f7e |
bpf: Fix handling of XADD on BTF memory
check_xadd() can cause check_ptr_to_btf_access() to be executed with
atype==BPF_READ and value_regno==-1 (meaning "just check whether the access
is okay, don't tell me what type it will result in").
Handle that case properly and skip writing type information, instead of
indexing into the registers at index -1 and writing into out-of-bounds
memory.
Note that at least at the moment, you can't actually write through a BTF
pointer, so check_xadd() will reject the program after calling
check_ptr_to_btf_access with atype==BPF_WRITE; but that's after the
verifier has already corrupted memory.
This patch assumes that BTF pointers are not available in unprivileged
programs.
Fixes:
|
|
|
Jann Horn
|
6e7e63cbb0 |
bpf: Forbid XADD on spilled pointers for unprivileged users
When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.
Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.
To be able to use __is_pointer_value() in check_stack_read(), move it up.
Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.
In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].
The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:
// r7 = map_pointer
BPF_LD_MAP_FD(BPF_REG_7, small_map),
// r8 = launder(map_pointer)
BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
BPF_MOV64_IMM(BPF_REG_1, 0),
((struct bpf_insn) {
.code = BPF_STX | BPF_DW | BPF_XADD,
.dst_reg = BPF_REG_FP,
.src_reg = BPF_REG_1,
.off = -8
}),
BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
// store r8 into map
BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN()
[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
Fixes:
|
|
Zou Wei
|
89f33dcadb |
bpf: remove unneeded conversion to bool in __mark_reg_unknown
This issue was detected by using the Coccinelle software: kernel/bpf/verifier.c:1259:16-21: WARNING: conversion to bool not needed here The conversion to bool is unneeded, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1586779076-101346-1-git-send-email-zou_wei@huawei.com |
|
|
John Fastabend
|
fa123ac022 |
bpf: Verifier, refine 32bit bound in do_refine_retval_range
Further refine return values range in do_refine_retval_range by noting
these are int return types (We will assume here that int is a 32-bit type).
Two reasons to pull this out of original patch. First it makes the original
fix impossible to backport. And second I've not seen this as being problematic
in practice unlike the other case.
Fixes:
|
|
|
John Fastabend
|
3f50f132d8 |
bpf: Verifier, do explicit ALU32 bounds tracking
It is not possible for the current verifier to track ALU32 and JMP ops
correctly. This can result in the verifier aborting with errors even though
the program should be verifiable. BPF codes that hit this can work around
it by changin int variables to 64-bit types, marking variables volatile,
etc. But this is all very ugly so it would be better to avoid these tricks.
But, the main reason to address this now is do_refine_retval_range() was
assuming return values could not be negative. Once we fixed this code that
was previously working will no longer work. See do_refine_retval_range()
patch for details. And we don't want to suddenly cause programs that used
to work to fail.
The simplest example code snippet that illustrates the problem is likely
this,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
The expected 64-bit and 32-bit bounds after each line are shown on the
right. The current issue is without the w* bounds we are forced to use
the worst case bound of [0, U32_MAX]. To resolve this type of case,
jmp32 creating divergent 32-bit bounds from 64-bit bounds, we add explicit
32-bit register bounds s32_{min|max}_value and u32_{min|max}_value. Then
from branch_taken logic creating new bounds we can track 32-bit bounds
explicitly.
The next case we observed is ALU ops after the jmp32,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
55: w8 += 1 // r8 <- [0, U32_MAX+1]
// w8 <- [0, X+1]
In order to keep the bounds accurate at this point we also need to track
ALU32 ops. To do this we add explicit ALU32 logic for each of the ALU
ops, mov, add, sub, etc.
Finally there is a question of how and when to merge bounds. The cases
enumerate here,
1. MOV ALU32 - zext 32-bit -> 64-bit
2. MOV ALU64 - copy 64-bit -> 32-bit
3. op ALU32 - zext 32-bit -> 64-bit
4. op ALU64 - n/a
5. jmp ALU32 - 64-bit: var32_off | upper_32_bits(var64_off)
6. jmp ALU64 - 32-bit: (>> (<< var64_off))
Details for each case,
For "MOV ALU32" BPF arch zero extends so we simply copy the bounds
from 32-bit into 64-bit ensuring we truncate var_off and 64-bit
bounds correctly. See zext_32_to_64.
For "MOV ALU64" copy all bounds including 32-bit into new register. If
the src register had 32-bit bounds the dst register will as well.
For "op ALU32" zero extend 32-bit into 64-bit the same as move,
see zext_32_to_64.
For "op ALU64" calculate both 32-bit and 64-bit bounds no merging
is done here. Except we have a special case. When RSH or ARSH is
done we can't simply ignore shifting bits from 64-bit reg into the
32-bit subreg. So currently just push bounds from 64-bit into 32-bit.
This will be correct in the sense that they will represent a valid
state of the register. However we could lose some accuracy if an
ARSH is following a jmp32 operation. We can handle this special
case in a follow up series.
For "jmp ALU32" mark 64-bit reg unknown and recalculate 64-bit bounds
from tnum by setting var_off to ((<<(>>var_off)) | var32_off). We
special case if 64-bit bounds has zero'd upper 32bits at which point
we can simply copy 32-bit bounds into 64-bit register. This catches
a common compiler trick where upper 32-bits are zeroed and then
32-bit ops are used followed by a 64-bit compare or 64-bit op on
a pointer. See __reg_combine_64_into_32().
For "jmp ALU64" cast the bounds of the 64bit to their 32-bit
counterpart. For example s32_min_value = (s32)reg->smin_value. For
tnum use only the lower 32bits via, (>>(<<var_off)). See
__reg_combine_64_into_32().
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560419880.10843.11448220440809118343.stgit@john-Precision-5820-Tower
|
|
|
John Fastabend
|
100605035e |
bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly
do_refine_retval_range() is called to refine return values from specified
helpers, probe_read_str and get_stack at the moment, the reasoning is
because both have a max value as part of their input arguments and
because the helper ensure the return value will not be larger than this
we can set smax values of the return register, r0.
However, the return value is a signed integer so setting umax is incorrect
It leads to further confusion when the do_refine_retval_range() then calls,
__reg_deduce_bounds() which will see a umax value as meaning the value is
unsigned and then assuming it is unsigned set the smin = umin which in this
case results in 'smin = 0' and an 'smax = X' where X is the input argument
from the helper call.
Here are the comments from _reg_deduce_bounds() on why this would be safe
to do.
/* Learn sign from unsigned bounds. Signed bounds cross the sign
* boundary, so we must be careful.
*/
if ((s64)reg->umax_value >= 0) {
/* Positive. We can't learn anything from the smin, but smax
* is positive, hence safe.
*/
reg->smin_value = reg->umin_value;
reg->smax_value = reg->umax_value = min_t(u64, reg->smax_value,
reg->umax_value);
But now we incorrectly have a return value with type int with the
signed bounds (0,X). Suppose the return value is negative, which is
possible the we have the verifier and reality out of sync. Among other
things this may result in any error handling code being falsely detected
as dead-code and removed. For instance the example below shows using
bpf_probe_read_str() causes the error path to be identified as dead
code and removed.
>From the 'llvm-object -S' dump,
r2 = 100
call 45
if r0 s< 0 goto +4
r4 = *(u32 *)(r7 + 0)
But from dump xlate
(b7) r2 = 100
(85) call bpf_probe_read_compat_str#-96768
(61) r4 = *(u32 *)(r7 +0) <-- dropped if goto
Due to verifier state after call being
R0=inv(id=0,umax_value=100,var_off=(0x0; 0x7f))
To fix omit setting the umax value because its not safe. The only
actual bounds we know is the smax. This results in the correct bounds
(SMIN, X) where X is the max length from the helper. After this the
new verifier state looks like the following after call 45.
R0=inv(id=0,smax_value=100)
Then xlated version no longer removed dead code giving the expected
result,
(b7) r2 = 100
(85) call bpf_probe_read_compat_str#-96768
(c5) if r0 s< 0x0 goto pc+4
(61) r4 = *(u32 *)(r7 +0)
Note, bpf_probe_read_* calls are root only so we wont hit this case
with non-root bpf users.
v3: comment had some documentation about meta set to null case which
is not relevant here and confusing to include in the comment.
v2 note: In original version we set msize_smax_value from check_func_arg()
and propagated this into smax of retval. The logic was smax is the bound
on the retval we set and because the type in the helper is ARG_CONST_SIZE
we know that the reg is a positive tnum_const() so umax=smax. Alexei
pointed out though this is a bit odd to read because the register in
check_func_arg() has a C type of u32 and the umax bound would be the
normally relavent bound here. Pulling in extra knowledge about future
checks makes reading the code a bit tricky. Further having a signed
meta data that can only ever be positive is also a bit odd. So dropped
the msize_smax_value metadata and made it a u64 msize_max_value to
indicate its unsigned. And additionally save bound from umax value in
check_arg_funcs which is the same as smax due to as noted above tnumx_cont
and negative check but reads better. By my analysis nothing functionally
changes in v2 but it does get easier to read so that is win.
Fixes:
|
|
|
Jann Horn
|
0fc31b10cf |
bpf: Simplify reg_set_min_max_inv handling
reg_set_min_max_inv() contains exactly the same logic as reg_set_min_max(), just flipped around. While this makes sense in a cBPF verifier (where ALU operations are not symmetric), it does not make sense for eBPF. Replace reg_set_min_max_inv() with a helper that flips the opcode around, then lets reg_set_min_max() do the complicated work. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200330160324.15259-4-daniel@iogearbox.net |
|
|
Jann Horn
|
604dca5e3a |
bpf: Fix tnum constraints for 32-bit comparisons
The BPF verifier tried to track values based on 32-bit comparisons by (ab)using the tnum state via |
|
|
Daniel Borkmann
|
f2d67fec0b |
bpf: Undo incorrect __reg_bound_offset32 handling
Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: (76) if w0 s>= 0x303030 goto pc+2
12: (95) exit
from 8 to 9: safe
from 5 to 6: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: safe
from 8 to 9: safe
verification time 589 usec
stack depth 0
processed 17 insns (limit 1000000) [...]
The underlying program was xlated as follows:
# bpftool p d x i 9
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
9: (76) if w0 s>= 0x303030 goto pc+2
10: (05) goto pc-1
11: (05) goto pc-1
12: (95) exit
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we're
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking different examples to make the issue more obvious: in this example
we're probing bounds on a completely unknown scalar variable in r1:
[...]
5: R0_w=inv1 R1_w=inv(id=0) R10=fp0
5: (18) r2 = 0x4000000000
7: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R10=fp0
7: (18) r3 = 0x2000000000
9: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R10=fp0
9: (18) r4 = 0x400
11: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R10=fp0
11: (18) r5 = 0x200
13: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
13: (2d) if r1 > r2 goto pc+4
R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: (ad) if r1 < r3 goto pc+3
R0_w=inv1 R1_w=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
15: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
15: (2e) if w1 > w4 goto pc+2
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: (ae) if w1 < w5 goto pc+1
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
[...]
We're first probing lower/upper bounds via jmp64, later we do a similar
check via jmp32 and examine the resulting var_off there. After fall-through
in insn 14, we get the following bounded r1 with 0x7fffffffff unknown marked
bits in the variable section.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111111111111111111111111111111111111 / 0x7fffffffff
min: 0b010000000000000000000000000000000000000 / 0x2000000000
Now, in insn 15 and 16, we perform a similar probe with lower/upper bounds
in jmp32.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and
w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111100000000000000000000000000000000 / 0x7f00000000
min: 0b010000000000000000000000000000000000000 / 0x2000000000
The lower/upper bounds haven't changed since they have high bits set in
u64 space and the jmp32 tests can only refine bounds in the low bits.
However, for the var part the expectation would have been 0x7f000007ff
or something less precise up to 0x7fffffffff. A outcome of 0x7f00000000
is not correct since it would contradict the earlier probed bounds
where we know that the result should have been in [0x200,0x400] in u32
space. Therefore, tests with such info will lead to wrong verifier
assumptions later on like falsely predicting conditional jumps to be
always taken, etc.
The issue here is that __reg_bound_offset32()'s implementation from
commit
|
|
|
KP Singh
|
9e4e01dfd3 |
bpf: lsm: Implement attach, detach and execution
JITed BPF programs are dynamically attached to the LSM hooks using BPF trampolines. The trampoline prologue generates code to handle conversion of the signature of the hook to the appropriate BPF context. The allocated trampoline programs are attached to the nop functions initialized as LSM hooks. BPF_PROG_TYPE_LSM programs must have a GPL compatible license and and need CAP_SYS_ADMIN (required for loading eBPF programs). Upon attachment: * A BPF fexit trampoline is used for LSM hooks with a void return type. * A BPF fmod_ret trampoline is used for LSM hooks which return an int. The attached programs can override the return value of the bpf LSM hook to indicate a MAC Policy decision. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Brendan Jackman <jackmanb@google.com> Reviewed-by: Florent Revest <revest@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/bpf/20200329004356.27286-5-kpsingh@chromium.org |
|
|
Daniel Borkmann
|
f318903c0b |
bpf: Add netns cookie and enable it for bpf cgroup hooks
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
|
|
|
John Fastabend
|
294f2fc6da |
bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()
Currently, for all op verification we call __red_deduce_bounds() and __red_bound_offset() but we only call __update_reg_bounds() in bitwise ops. However, we could benefit from calling __update_reg_bounds() in BPF_ADD, BPF_SUB, and BPF_MUL cases as well. For example, a register with state 'R1_w=invP0' when we subtract from it, w1 -= 2 Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op as done in above example. However tnum will be a constant because the ALU op is done on a constant. Without update_reg_bounds() we have a scenario where tnum is a const but our unsigned bounds do not reflect this. By calling update_reg_bounds after coerce to 32bit we further refine the umin_value to U64_MAX in the alu64 case or U32_MAX in the alu32 case above. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower |
|
|
John Fastabend
|
07cd263148 |
bpf: Verifer, refactor adjust_scalar_min_max_vals
Pull per op ALU logic into individual functions. We are about to add u32 versions of each of these by pull them out the code gets a bit more readable here and nicer in the next patch. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507149518.15666.15672349629329072411.stgit@john-Precision-5820-Tower |
|
Eelco Chaudron
|
d831ee84bf |
bpf: Add bpf_xdp_output() helper
Introduce new helper that reuses existing xdp perf_event output implementation, but can be called from raw_tracepoint programs that receive 'struct xdp_buff *' as a tracepoint argument. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial |
|
|
KP Singh
|
69191754ff |
bpf: Remove unnecessary CAP_MAC_ADMIN check
While well intentioned, checking CAP_MAC_ADMIN for attaching
BPF_MODIFY_RETURN tracing programs to "security_" functions is not
necessary as tracing BPF programs already require CAP_SYS_ADMIN.
Fixes:
|
|
|
KP Singh
|
6ba43b761c |
bpf: Attachment verification for BPF_MODIFY_RETURN
- Allow BPF_MODIFY_RETURN attachment only to functions that are:
* Whitelisted for error injection by checking
within_error_injection_list. Similar discussions happened for the
bpf_override_return helper.
* security hooks, this is expected to be cleaned up with the LSM
changes after the KRSI patches introduce the LSM_HOOK macro:
https://lore.kernel.org/bpf/20200220175250.10795-1-kpsingh@chromium.org/
- The attachment is currently limited to functions that return an int.
This can be extended later other types (e.g. PTR).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-5-kpsingh@chromium.org
|
|
|
KP Singh
|
ae24082331 |
bpf: Introduce BPF_MODIFY_RETURN
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
|
|
Thomas Gleixner
|
2ed905c521 |
bpf: Enforce preallocation for instrumentation programs on RT
Aside of the general unsafety of run-time map allocation for instrumentation type programs RT enabled kernels have another constraint: The instrumentation programs are invoked with preemption disabled, but the memory allocator spinlocks cannot be acquired in atomic context because they are converted to 'sleeping' spinlocks on RT. Therefore enforce map preallocation for these programs types when RT is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145642.648784007@linutronix.de |
|
|
Thomas Gleixner
|
94dacdbd5d |
bpf: Tighten the requirements for preallocated hash maps
The assumption that only programs attached to perf NMI events can deadlock
on memory allocators is wrong. Assume the following simplified callchain:
kmalloc() from regular non BPF context
cache empty
freelist empty
lock(zone->lock);
tracepoint or kprobe
BPF()
update_elem()
lock(bucket)
kmalloc()
cache empty
freelist empty
lock(zone->lock); <- DEADLOCK
There are other ways which do not involve locking to create wreckage:
kmalloc() from regular non BPF context
local_irq_save();
...
obj = slab_first();
kprobe()
BPF()
update_elem()
lock(bucket)
kmalloc()
local_irq_save();
...
obj = slab_first(); <- Same object as above ...
So preallocation _must_ be enforced for all variants of intrusive
instrumentation.
Unfortunately immediate enforcement would break backwards compatibility, so
for now such programs still are allowed to run, but a one time warning is
emitted in dmesg and the verifier emits a warning in the verifier log as
well so developers are made aware about this and can fix their programs
before the enforcement becomes mandatory.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.540542802@linutronix.de
|
|
|
Jakub Sitnicki
|
9fed9000c5 |
bpf: Allow selecting reuseport socket from a SOCKMAP/SOCKHASH
SOCKMAP & SOCKHASH now support storing references to listening
sockets. Nothing keeps us from using these map types a collection of
sockets to select from in BPF reuseport programs. Whitelist the map types
with the bpf_sk_select_reuseport helper.
The restriction that the socket has to be a member of a reuseport group
still applies. Sockets in SOCKMAP/SOCKHASH that don't have sk_reuseport_cb
set are not a valid target and we signal it with -EINVAL.
The main benefit from this change is that, in contrast to
REUSEPORT_SOCKARRAY, SOCK{MAP,HASH} don't impose a restriction that a
listening socket can be just one BPF map at the same time.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-9-jakub@cloudflare.com
|
|
|
David S. Miller
|
954b3c4397 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Martin KaFai Lau
|
5576b991e9 |
bpf: Add BPF_FUNC_jiffies64
This patch adds a helper to read the 64bit jiffies. It will be used in a later patch to implement the bpf_cubic.c. The helper is inlined for jit_requested and 64 BITS_PER_LONG as the map_gen_lookup(). Other cases could be considered together with map_gen_lookup() if needed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com |
|
|
Alexei Starovoitov
|
be8704ff07 |
bpf: Introduce dynamic program extensions
Introduce dynamic program extensions. The users can load additional BPF functions and replace global functions in previously loaded BPF programs while these programs are executing. Global functions are verified individually by the verifier based on their types only. Hence the global function in the new program which types match older function can safely replace that corresponding function. This new function/program is called 'an extension' of old program. At load time the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function to be replaced. The BPF program type is derived from the target program into extension program. Technically bpf_verifier_ops is copied from target program. The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops. The extension program can call the same bpf helper functions as target program. Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program types. The verifier allows only one level of replacement. Meaning that the extension program cannot recursively extend an extension. That also means that the maximum stack size is increasing from 512 to 1024 bytes and maximum function nesting level from 8 to 16. The programs don't always consume that much. The stack usage is determined by the number of on-stack variables used by the program. The verifier could have enforced 512 limit for combined original plus extension program, but it makes for difficult user experience. The main use case for extensions is to provide generic mechanism to plug external programs into policy program or function call chaining. BPF trampoline is used to track both fentry/fexit and program extensions because both are using the same nop slot at the beginning of every BPF function. Attaching fentry/fexit to a function that was replaced is not allowed. The opposite is true as well. Replacing a function that currently being analyzed with fentry/fexit is not allowed. The executable page allocated by BPF trampoline is not used by program extensions. This inefficiency will be optimized in future patches. Function by function verification of global function supports scalars and pointer to context only. Hence program extensions are supported for such class of global functions only. In the future the verifier will be extended with support to pointers to structures, arrays with sizes, etc. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org |
|
|
Alexei Starovoitov
|
f59bbfc2f6 |
bpf: Fix error path under memory pressure
Restore the 'if (env->cur_state)' check that was incorrectly removed during
code move. Under memory pressure env->cur_state can be freed and zeroed inside
do_check(). Hence the check is necessary.
Fixes:
|
|
|
Daniel Borkmann
|
0af2ffc93a |
bpf: Fix incorrect verifier simulation of ARSH under ALU32
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to |
|
|
Alexei Starovoitov
|
51c39bb1d5 |
bpf: Introduce function-by-function verification
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
|
|
|
Martin KaFai Lau
|
85d33df357 |
bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
|
|
Martin KaFai Lau
|
27ae7997a6 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |