When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior. Better to assume a
valid protocol found in the protocol capability bits instead.
For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.
Link: https://lore.kernel.org/r/20240529164723.18309-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP Stream Configuration message is received, the driver tries
to switch the protocol, but there was no sanity check of the protocol,
hence it can pass an invalid value. Add the check and bail out if a
wrong value is passed.
Fixes: a798076837 ("ALSA: ump: Add helper to change MIDI protocol")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code clears the bank selection MSB/LSB after sending a
program change, but this can be wrong, as many apps may not send the
full bank selection with both MSB and LSB but sending only one.
Better to keep the previous bank set.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083823.5778-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When converting a legacy system message to a UMP packet, it forgot to
modify the UMP type field but keeping the default type (either type 2
or 4). Correct to the right type for system messages.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083800.5742-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code to convert from a legacy sequencer event to UMP MIDI2
clears the bank selection at each time the program change is
submitted. This is confusing and may lead to incorrect bank values
tranmitted to the destination in the end.
Drop the line to clear the bank info and keep the provided values.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP packet is converted between MIDI1 and MIDI2 protocols, the
bank selection may be lost. The conversion from MIDI1 to MIDI2 needs
the encoding of the bank into UMP_MSG_STATUS_PROGRAM bits, while the
conversion from MIDI2 to MIDI1 needs the extraction from that
instead.
This patch implements the missing bank selection mechanism in those
conversions.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes for 6.10-rc1. Most of changes are
various device-specific fixes and quirks, while there are a few small
changes in ALSA core timer and module / built-in fixes.
-----BEGIN PGP SIGNATURE-----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=VeU/
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
- Ensure seldom updated triggers have a brightness value before first update
- New Device Support
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
- New Functionality
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
- Fix-ups
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Bug Fixes
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending
-----BEGIN PGP SIGNATURE-----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=rF2l
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
We used '#ifdef MODULE' for judging whether the system supports the
sound module or not, and /proc/asound/modules is created only when
'#ifdef MODULE' is true. The check is not really appropriate, though,
because the flag means only for the sound core and the drivers are
still allowed to be built as modules even if 'MODULE' is not set in
sound/core/init.c.
For fixing the inconsistency, replace those ifdefs with 'ifdef
CONFIG_MODULES'. One place for a NULL module check is rewritten with
IS_MODULE(CONFIG_SND) to be more intuitive. It can't be changed to
CONFIG_MODULES; otherwise it would hit a WARN_ON() incorrectly.
This is a slight behavior change; the modules proc entry appears now
no matter whether the sound core is built-in or not as long as modules
are enabled on the kernel in general. This can't be avoided due to
the nature of kernel builds.
Link: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-2-tiwai@suse.de
The commit 81033c6b58 ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.
Fixes: 81033c6b58 ("ALSA: core: Warn on empty module")
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
Reported-by: syzbot+43120c2af6ca2938cc38@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000fa00a1061740ab6d@google.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240514182745.4015-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent code change, the conditional build with CONFIG_PM is
calling only snd_power_sync_ref(). As a dummy function is provided
for this function, we can get rid of CONFIG_PM gracefully now.
Link: https://lore.kernel.org/r/20240510125128.6058-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218816
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240510101424.6279-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de
Some data for testing is immutable. In the case, the const qualifier is
available for any loader to place it to read-only segment.
Fixes: 3e39acf56e ("ALSA: core: Add sound core KUnit test")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240425233653.218434-1-o-takashi@sakamocchi.jp>
Don't populate the read-only array buf_samples on the stack at
run time, instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240425160754.114716-1-colin.i.king@gmail.com>
Instead of reiterating the list, use list_for_each_entry_safe()
that allows to continue without starting over.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Message-ID: <20240424145020.1057216-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the purpose of dummy seq client is a direct pass-through,
it's sometimes helpful for debugging if it can convert to a certain
UMP MIDI version. This patch adds an option to specify the UMP event
conversion. As default, it skips the conversion and does
passthrough, while user can pass ump=1 or ump=2 to enforce the
conversion to UMP MIDI1 or MIDI2 format.
Message-ID: <20240419101105.15571-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion from MIDI2 to MIDI1 UMP messages had a leftover
artifact (superfluous bit shift), and this resulted in the bogus type
check, leading to empty outputs. Let's fix it.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://github.com/alsa-project/alsa-utils/issues/262
Message-ID: <20240419100442.14806-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many modern codecs support 705.6kHz and 768kHz sample rates. Current HW
params fail to set 705.6kHz and 768kHz sample rates as these are not in the
known-rates list.
Add these new rates to the known-rates list to allow them.
Also add defines in pcm.h so that drivers can use it.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240416121726.628679-3-pavel.hofman@ivitera.com>
This driver is the only one calling ledtrig_audio_set(), therefore
the LED audio trigger isn't usable standalone. So it makes sense
to fully integrate LED audio triger handling here.
The module aliases ensure that the driver is auto-loaded (if built
as module) if a LED device has one of the two audio triggers as
default trigger.
In addition disable building the old audio mute LED trigger.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/107634e6-d9ad-4a9f-881d-1eb72ea1a5a7@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d98822 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang prior to 17.0.0 has a bug in its asm goto jump scope analysis to
determine that no variables with the cleanup attribute are skipped by an
indirect jump. Instead of only checking the scope of each label that is
a possible target of each asm goto statement, it checks the scope of
every label, which can cause an error when a variable with the cleanup
attribute is used between two asm goto statements with different scopes,
even if they have completely different label targets:
sound/core/hwdep.c:273:8: error: cannot jump from this asm goto statement to one of its possible targets
if (get_user(device, (int __user *)arg))
^
arch/powerpc/include/asm/uaccess.h:295:5: note: expanded from macro 'get_user'
__get_user(x, _gu_addr) : \
^
arch/powerpc/include/asm/uaccess.h:283:2: note: expanded from macro '__get_user'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
arch/powerpc/include/asm/uaccess.h:199:3: note: expanded from macro '__get_user_size_allowed'
__get_user_size_goto(x, ptr, size, __gus_failed); \
^
arch/powerpc/include/asm/uaccess.h:187:10: note: expanded from macro '__get_user_size_goto'
case 1: __get_user_asm_goto(x, (u8 __user *)ptr, label, "lbz"); break; \
^
arch/powerpc/include/asm/uaccess.h:158:2: note: expanded from macro '__get_user_asm_goto'
asm_volatile_goto( \
^
include/linux/compiler_types.h:366:33: note: expanded from macro 'asm_volatile_goto'
#define asm_volatile_goto(x...) asm goto(x)
^
sound/core/hwdep.c:291:9: note: possible target of asm goto statement
if (put_user(device, (int __user *)arg))
^
arch/powerpc/include/asm/uaccess.h:66:5: note: expanded from macro 'put_user'
__put_user(x, _pu_addr) : -EFAULT; \
^
arch/powerpc/include/asm/uaccess.h:52:9: note: expanded from macro '__put_user'
\
^
sound/core/hwdep.c:276:4: note: jump bypasses initialization of variable with __attribute__((cleanup))
scoped_guard(mutex, ®ister_mutex) {
^
include/linux/cleanup.h:169:20: note: expanded from macro 'scoped_guard'
for (CLASS(_name, scope)(args), \
To avoid this issue, move the put_user() call out of the scoped_guard()
scope, which allows the asm goto scope analysis to see that the variable
with the cleanup attribute will never be skipped by the asm goto
statements.
There should be no functional change because prior to the refactoring,
put_user() was not called under register_mutex, so this call does not
even need to be in the scoped_guard() in the first place.
Fixes: e6684d08cc ("ALSA: hwdep: Use guard() for locking")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2003
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240301-fix-snd-hwdep-guard-v1-1-6aab033f3f83@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
A couple of functions that use snd_card_ref() and *_unref() are also
cleaned up with a defined class, too.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-25-tiwai@suse.de
The setup_mutex in PCM oss code can be simplified with guard().
(params_lock is tough and not trivial to covert, though.)
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-24-tiwai@suse.de
Define guard() usage for PCM stream locking and use it in appropriate
places.
The pair of snd_pcm_stream_lock() and snd_pcm_stream_unlock() can be
presented with guard(pcm_stream_lock) now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-23-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-22-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-21-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-20-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-19-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-18-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-17-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-16-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-15-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-14-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-13-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-12-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-11-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
There are a few remaining explicit mutex and spinlock calls, and those
are the places where the temporary unlock/relocking happens -- which
guard() doens't cover well yet.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-10-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
The lops calls under multiple rwsems are factored out as a simple
macro, so that it can be called easily from snd_ctl_dev_register()
and snd_ctl_dev_disconnect().
There are a few remaining explicit rwsem and spinlock calls, and those
are the places where the lock downgrade happens or where the temporary
unlock/relocking happens -- which guard() doens't cover well yet.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-9-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-8-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-7-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
There are still a few remaining explicit mutex_lock/unlock calls, and
those are for the places where we do temporary unlock/relock, which
doesn't fit well with the guard(), so far.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-6-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-5-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
For making changes easier, some functions widen the application of
register_mutex, but those shouldn't influence on any actual
performance.
Also, one code block was factored out as a function so that guard()
can be applied cleanly without much indentation.
There are still a few remaining explicit spin_lock/unlock calls, and
those are for the places where we do temporary unlock/relock, which
doesn't fit well with the guard(), so far.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-4-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
The explicit mutex_lock/unlock are still seen only in
snd_compress_wait_for_drain() which does temporary unlock/relocking.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-3-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-2-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-5-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-4-tiwai@suse.de
Now we have a nice definition of CLASS(fd) that can be applied as a
clean up for the fdget/fdput pairs in snd_pcm_link().
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-2-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-10-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-9-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-8-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-7-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-6-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-5-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-4-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-3-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
A caveat is that some allocations are memdup_user() and they return an
error pointer instead of NULL. Those need special cares and the value
has to be cleared with no_free_ptr() at the allocation error path.
Other than that, the conversions are straightforward.
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240222111509.28390-2-tiwai@suse.de
Return used most significant bits from sample bit-width rather than the whole
physical sample word size. The starting bit offset is defined in the format
itself.
The behaviour is not changed for 32-bit formats like S32_LE. But with this
change - msbits value 24 instead 32 is returned for 24-bit formats like S24_LE
etc.
Also, commit 2112aa0349 ("ALSA: pcm: Introduce MSBITS subformat interface")
compares sample bit-width not physical sample bit-width to reset MSBITS_MAX bit
from the subformat bitmask.
Probably no applications are using msbits value for other than S32_LE/U32_LE
formats, because no drivers are reducing msbits value for other formats (with
the msb offset) at the moment.
For sanity, increase PCM protocol version, letting the user space to detect
the changed behaviour.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240222173649.1447549-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_seq_prioq_remove_events() and snd_seq_prioq_leave() have a
very similar loop for removing events. Unify them with a callback for
code simplification.
Only the code refactoring, and no functional changes.
Link: https://lore.kernel.org/r/20240222132152.29063-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We forgot to remove the line for snd-rtctimer from Makefile while
dropping the functionality. Get rid of the stale line.
Fixes: 34ce71a96d ("ALSA: timer: remove legacy rtctimer")
Link: https://lore.kernel.org/r/20240221092156.28695-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In modern C versions, 'bool' is a keyword that cannot be used as
a variable name, so change this instance use something else, and
change the type to bool instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240216130211.3828455-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the snd_seq_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240214-bus_cleanup-alsa-v1-2-8fedbb4afa94@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang-16 points out a control flow integrity (kcfi) issue when event
callbacks get converted to incompatible types:
sound/core/seq/seq_midi.c:135:30: error: cast from 'int (*)(struct snd_rawmidi_substream *, const char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
135 | snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/core/seq/seq_virmidi.c:83:31: error: cast from 'int (*)(struct snd_rawmidi_substream *, const unsigned char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
83 | snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For addressing those errors, introduce wrapper functions that are used
for callbacks and bridge to the actual function call with pointer
cast.
The code was originally added with the initial ALSA merge in linux-2.5.4.
[ the patch description shamelessly copied from Arnd's original patch
-- tiwai ]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213101020.459183-1-arnd@kernel.org
Link: https://lore.kernel.org/r/20240213135343.16411-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the moment, we have a decent amount of integration tests (selftests)
covering different aspects of the sound subsystem. However, a lot of
of sound-related in-kernel functions remains uncovered. This patch
introduces the KUnit test for the core part of the sound subsystem.
It includes 10 test cases:
- Coverage of the format-related inline functions from 'pcm.h' header
file: snd_pcm_format_physical_width, snd_pcm_format_width,
snd_pcm_format_signed, test_format_endianness
- Coverage of the available bytes counting functions from 'pcm.h'
header: snd_pcm_capture_avail, snd_pcm_playback_avail
- Coverage of functions from pcm_misc: snd_pcm_format_set_silence,
snd_pcm_format_name
- Coverage of card-related functions from init.c: snd_card_set_id,
snd_component_add
This patch depends on the previous patches in this patch series as they
contain fix for the bug, which was found during the test development.
Without them, the test doesn't pass.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240125223522.1122765-3-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix snd_pcm_format_name so it won't return NULL-pointer in case if it
can't find the format in the 'snd_pcm_format_names' list. Return
"Unknown" instead, as it is done if the number passed to the function
is larger than a list size.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240125223522.1122765-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add 4 missing formats to 'snd_pcm_format_names' array in order to be
able to get their names with 'snd_pcm_format_name' function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240125223522.1122765-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was a clam development cycle. There were an ALSA core extension
for subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4.
Also supports for ACPI parse for the ES83xx driver that reduces
quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes
-----BEGIN PGP SIGNATURE-----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=yVxc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
sound/core/seq/seq_memory.c: In function 'snd_seq_pool_init':
sound/core/seq/seq_memory.c:445:41: warning: 'kvmalloc_array' sizes specified with
'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
445 | cellptr = kvmalloc_array(sizeof(struct snd_seq_event_cell), pool->size,
| ^~~~~~
Since 'n' and 'size' arguments of 'kvmalloc_array()' are multiplied
to calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231221091605.14660-1-dmantipov@yandex.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmV2PMQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgQIAKSdjtpkv+IeDwph
umLHxDlCTT8nl+TAhEYuxSdMiHt1i7+zyF0snnHhGthBRnBZBf+PDdkQOmqtjLZj
e591VGY7tdNCAVUwmRRaI82JFz9Pl1k8DXL3f+CE1+MfbpsirAecoIAL0rsvg+4f
ICKSAOBZonL7GT7IGrsbxgqGKCLC+2PcgNT4pADBdjtbC1nmVSLK21dtWr6i4xsn
CT9MxAnej1+EOpreyHhNZUVqfQy0/04x4OY0u/EOXU3PgpfGTrAzkyfwzcd/eit0
x59TZ0owDVXfvvdXUUAC0zG1th2ek5LKNtL+C4rKOoAbq7GZoQfjN5M/Ug+yykwE
aqm6CJ8=
=tZ+R
-----END PGP SIGNATURE-----
Backmerge tag 'v6.7-rc5' into drm-next
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a set of functions that ultimately facilite SDxFMT-related
calculations in atomic manner:
First, introduce snd_pcm_subformat_width() and snd_pcm_hw_params_bits()
helpers that separate the base functionality from the HDAudio-specific
one.
snd_hdac_format_normalize() - format converter. S20_LE, S24_LE and their
unsigned and BE friends are invalid from HDAudio perspective but still
can be specified as function argument due to compatibility reasons.
snd_hdac_stream_format_bits() - obtain just the bits-per-sample value.
Does not ignore subformat and msbits parameters.
snd_hdac_stream_format() and snd_hdac_spdif_stream_format() - obtain the
SDxFMT value given the audio format parameters. The former is stripped
away of spdif-related information. Useful for users that do not care
about them.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Improve granularity of format selection for S32/U32 formats by adding
constants representing 20, 24 and MAX most significant bits.
The MAX means the maximum number of significant bits which can
the physical format hold. For 32-bit formats, MAX is related
to 32 bits. For 8-bit formats, MAX is related to 8 bits etc.
As there is only one user currently (format S32_LE), subformat is
represented by a simple u32 and stores flags only for that one user
alone. The approach of subformat being part of struct snd_pcm_hardware
is a compromise between ALSA and ASoC allowing for
hw_params-intersection code to be alloc/free-less while not adding any
new responsibilities to ASoC runtime structures.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Co-developed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231117120610.1755254-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of fixes for RC1. Majority of changes are various
ASoC driver-specific small fixes and usual HD-audio quirks, while
there are a couple of core changes: a fix in ALSA core procfs code
to avoid deadlocks at disconnection and an ASoC core fix for DAPM
clock widgets.
-----BEGIN PGP SIGNATURE-----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=6iW2
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
As reported recently, ALSA core info helper may cause a deadlock at
the forced device disconnection during the procfs operation.
The proc_remove() (that is called from the snd_card_disconnect()
helper) has a synchronization of the pending procfs accesses via
wait_for_completion(). Meanwhile, ALSA procfs helper takes the global
mutex_lock(&info_mutex) at both the proc_open callback and
snd_card_info_disconnect() helper. Since the proc_open can't finish
due to the mutex lock, wait_for_completion() never returns, either,
hence it deadlocks.
TASK#1 TASK#2
proc_reg_open()
takes use_pde()
snd_info_text_entry_open()
snd_card_disconnect()
snd_info_card_disconnect()
takes mutex_lock(&info_mutex)
proc_remove()
wait_for_completion(unused_pde)
... waiting task#1 closes
mutex_lock(&info_mutex)
=> DEADLOCK
This patch is a workaround for avoiding the deadlock scenario above.
The basic strategy is to move proc_remove() call outside the mutex
lock. proc_remove() can work gracefully without extra locking, and it
can delete the tree recursively alone. So, we call proc_remove() at
snd_info_card_disconnection() at first, then delete the rest resources
recursively within the info_mutex lock.
After the change, the function snd_info_disconnect() doesn't do
disconnection by itself any longer, but it merely clears the procfs
pointer. So rename the function to snd_info_clear_entries() for
avoiding confusion.
The similar change is applied to snd_info_free_entry(), too. Since
the proc_remove() is called only conditionally with the non-NULL
entry->p, it's skipped after the snd_info_clear_entries() call.
Reported-by: Shinhyung Kang <s47.kang@samsung.com>
Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization. Other than that, there
have little change wrt API, rather lots of driver-specific updates and
fixes. Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list
-----BEGIN PGP SIGNATURE-----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=2/dI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppQwAKCRCRxhvAZXjc
om2kAP4u+eLsrhJHfUPUttGUEkSkZE+5/s/f1A/1GcV51usLSgEAu8urxAnP49GW
INaDABXaFfKx8/KI/H2YFZPKGwlNEwY=
=PDDE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iov_iter updates from Christian Brauner:
"This contain's David's iov_iter cleanup work to convert the iov_iter
iteration macros to inline functions:
- Remove last_offset from iov_iter as it was only used by ITER_PIPE
- Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
match that on powerpc and get rid of a sparse warning
- Convert iter->user_backed to user_backed_iter() in the sound PCM
driver
- Convert iter->user_backed to user_backed_iter() in a couple of
infiniband drivers
- Renumber the type enum so that the ITER_* constants match the order
in iterate_and_advance*()
- Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
user_backed_iter() to just use the type value and get rid of the
extra flag
- Convert the iov_iter iteration macros to always-inline functions to
make the code easier to follow. It uses function pointers, but they
get optimised away
- Move the check for ->copy_mc to _copy_from_iter() and
copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
where it gets repeated for every segment. Instead, we check once
and invoke a side function that can use iterate_bvec() rather than
iterate_and_advance() and supply a different step function
- Move the copy-and-csum code to net/ where it can be in proximity
with the code that uses it
- Fold memcpy_and_csum() in to its two users
- Move csum_and_copy_from_iter_full() out of line and merge in
csum_and_copy_from_iter() since the former is the only caller of
the latter
- Move hash_and_copy_to_iter() to net/ where it can be with its only
caller"
* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter, net: Move hash_and_copy_to_iter() to net/
iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
iov_iter, net: Fold in csum_and_memcpy()
iov_iter, net: Move csum_and_copy_to/from_iter() to net/
iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
iov_iter: Convert iterate*() to inline funcs
iov_iter: Derive user-backedness from the iterator type
iov_iter: Renumber ITER_* constants
infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
sound: Fix snd_pcm_readv()/writev() to use iov access functions
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE
The compile warnings with -Wformat-truncation appearing at
snd_seq_midisynth_probe() in seq_midi.c are false-positive; those must
fit within the given string size.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Link: https://lore.kernel.org/r/20230915082802.28684-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The filling of a port name string got a warning with W=1 due to the
potentially too long group name. Add the string precision to limit
the size.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Link: https://lore.kernel.org/r/20230915082802.28684-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no need to use temporary string for the debugfs directory name as
we can use the device name of the card.
This change will also fixes the following compiler warning/error (W=1):
sound/core/init.c: In function ‘snd_card_init’:
sound/core/init.c:367:28: error: ‘%d’ directive writing between 1 and 10 bytes into a region of size 4 [-Werror=format-overflow=]
367 | sprintf(name, "card%d", idx);
| ^~
sound/core/init.c:367:23: note: directive argument in the range [0, 2147483646]
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~
sound/core/init.c:367:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 8
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The idx is guarantied to be less than SNDRV_CARDS (max 256 or 8) by the
code in snd_card_init(), however the compiler does not see that.
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230912110113.3166-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA sequencer core still delivers events to the disabled UMP Group,
leaving this handling to the device. But it's rather risky and it's
easy to imagine that such an unexpected event may screw up the device
firmware.
This patch avoids the superfluous event deliveries by setting the
group_filter of the UMP client as default, and evaluate the
group_filter properly at delivery from non-UMP clients.
The grouop_filter is updated upon the dynamic UMP Function Block
updates, so that it follows the change of the disabled UMP Groups,
too.
Fixes: d2b7060777 ("ALSA: seq: Add UMP group filter")
Link: https://lore.kernel.org/r/20230912085144.32534-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure. It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.
This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().
Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff0 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Filling the rawmidi name and substream name can be truncated, and this
leads to spurious compiler warnings due to -Wformat-truncation.
Although the truncation is the expected behavior, it'd be better to
truncate the string within "(...)"
This patch puts the precision specifies to each %s for fitting the
words within the size-limited strings.
Fixes: 5f11dd938f ("ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251844.1FuQYsql-lkp@intel.com/
Link: https://lore.kernel.org/r/20230826072151.23408-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the UMP Endpoint is declared as "static", that is, no dynamic
reassignment of UMP Groups, it makes little sense to expose always all
16 groups with 16 substreams. Many of those substreams are disabled
groups, hence they are useless, but applications don't know it and try
to open / access all those substreams unnecessarily.
This patch limits the number of UMP legacy rawmidi substreams only to
the active groups. The behavior is changed only for the static
endpoint (i.e. devices without UMP v1.1 feature implemented or with
the static block flag is set).
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make it clearer which legacy substream corresponds to which UMP
group, fill the subname field of each substream object with the group
number and the endpoint name, e.g. "Group 1 (My Device)".
Ideally speaking, we should have some better link information to the
derived UMP, but it's another feature extension.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The legacy rawmidi devices are the shadows of the main UMP devices,
hence it's better to initialize them after all UMP Endpoints are
parsed. Then, at the moment the legacy rawmidi is created, we already
know the static flag or the proper EP name string, and we can fill
those information at UMP core side instead of fiddling the attributes
at a later point.
Fixes: ec362b63c4 ("ALSA: usb-audio: Enable the legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add two more helpers for copying memory between iov_iter and iomem,
which will be used by the new PCM copy ops in a few drivers.
The existing helpers became wrappers of those now.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iov_iter is a universal interface to copy the data chunk from/to
user-space and kernel in a unified manner. This API can fit for ALSA
PCM copy ops, too; we had to split to copy_user and copy_kernel in the
past, and those can be unified to a single ops with iov_iter.
This patch adds a new PCM copy ops that passes iov_iter for copying
both kernel and user-space in the same way. This patch touches only
the ALSA PCM core part, and the actual users will be replaced in the
following patches.
The expansion of iov_iter is done in the PCM core right before calling
each copy callback. It's a bit suboptimal, but I took this now as
it's the most straightforward replacement. The more conversion to
iov_iter in the caller side is a TODO for future.
As of now, the old copy_user and copy_kernel ops are still kept.
Once after all users are converted, we'll drop the old copy_user and
copy_kernel ops, too.
Link: https://lore.kernel.org/r/20230815190136.8987-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all users of snd_device_intialize() are gone, let's drop it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Align with the other components, and use snd_device_alloc() for the
new sound device for sequencer, too. No functional changes.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Align with the other components, and use snd_device_alloc() for the
new sound device for timer, too. No functional changes.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Embedding the struct device to snd_compr object may result in UAF when
the delayed kobj release is used. Like other devices, let's detach
the struct device from the snd_compr by allocating dynamically via
snd_device_alloc().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch detaches the struct device from the snd_rawmidi object by
allocating via snd_device_alloc(), just like done for other devices.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like control and PCM devices, it's better to avoid the embedded struct
device for hwdep (although it's more or less well working), too.
Change it to allocate via snd_device_alloc(), and free the memory at
the common snd_hwdep_free().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we use the embedded struct device for each PCM substreams in
struct snd_pcm. This may result in UAF when the delayed kobj release
is used; each corresponding struct device is still accessed at the
(delayed) device release, while the snd_pcm object may be already
gone.
As a workaround, detach the struct device from the snd_pcm object by
allocating via the new snd_device_alloc() helper.
A caveat is that we store the PCM substream pointer to drvdata since
the device resume and others require the access to it.
This patch is based on the fix Curtis posted initially. In this
patch, the changes are split and use the new helper function instead.
Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Embedding the ctl_dev in the snd_card object may result in UAF when
the delayed kobj release is used; at the delayed kobj release, it
still accesses the struct device itself while the card memory (that
embeds the struct device) may be already gone.
As a workaround, detach the struct device from the card object by
allocating via the new snd_device_alloc() helper. The rest are just
replacing ctl_dev access to the pointer.
This is based on the fix Curtis posted initially. In this patch, the
changes are split and use the new helper function instead.
Link: https://lore.kernel.org/r/20230801171928.1460120-1-cujomalainey@chromium.org
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper, snd_device_alloc(), for allocating a struct
device that is bound with the sound class. It's a replacement of
snd_device_initialize().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS/t9MACgkQJNaLcl1U
h9Dg4wf+Njvy5zphgUJlSJ7vNj7GtzgldnWwfQrb+19BOtv5HHIYg4e/Yr4eWdgc
rg5DGIGvr8sxYQ44TCA59sXdTuakkNF/ejDoj8AwNsr/J3sD6S+FTkV8qLFcgQ3r
+0ElZ26I2kd6gfvDlwHfa5rJVPCa7vrg3o6EHccqRX9CSyPJRlwRqRRj+w8ftZtV
rZ7Gapz3E4A3mBo7VIO/kEgI1uSmaShM8d4HoVmxJEKJ6lbyX8SIXMBzZVq5z/iX
DcnRaMPAMhgzytmdDJ7SjJuxL0EOd6p8Lnk0jILvO6U30Z7aTunzMuK/o0GHqFkm
eHveoHIU4gbt3YqDFgPosPlxi4OCgw==
=KJZq
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6-early' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.6
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
Add a new helper to add multiple vmaster followers in a shot. The
same function was open-coded in various places, and this helper
replaces them.
Link: https://lore.kernel.org/r/20230721071643.3631-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all needed callers have been replaced with *_locked() versions,
let's turn on the locking in snd_ctl_find_id() and
snd_ctl_find_numid().
This patch also adds the lockdep assertions for debugging, too.
Link: https://lore.kernel.org/r/20230718141304.1032-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the unnecessary use of controls_rwsem in the drivers,
this patch adds a new variant for snd_ctl_find_*() helpers:
snd_ctl_find_id_locked() and snd_ctl_find_numid_locked() look for a
kctl element inside the card->controls_rwsem -- that is, doing the
very same as what snd_ctl_find_id() and snd_ctl_find_numid() did until
now. snd_ctl_find_id() and snd_ctl_find_numid() remain same,
i.e. still unlocked version, but they will be switched to locked
version once after all callers are replaced.
The patch also replaces the calls of snd_ctl_find_id() and
snd_ctl_find_numid() in a few places; all of those are places where we
know that the functions are called properly with controls_rwsem held.
All others are without rwsem (although they should have been).
After this patch, we'll turn on the locking in snd_ctl_find_id() and
snd_ctl_find_numid() to be more race-free.
Link: https://lore.kernel.org/r/20230718141304.1032-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To assure the proper locking, add the lockdep check to
__snd_ctl_remove(), __snd_ctl_add_replace() and other internal
functions to handle user controls.
Link: https://lore.kernel.org/r/20230718141304.1032-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, snd_ctl_remove() requires its caller to take
card->controls_rwsem manually before the call for avoiding possible
races. However, many callers don't care and miss the locking.
Basically it's cumbersome and error-prone to enforce it to each
caller. Moreover, card->controls_rwsem is a field that should be used
only by internal or proper helpers, and it's not to be touched at
random external places.
This patch is an attempt to make those calls more consistent: now
snd_ctl_remove() takes the card->controls_rwsem internally, just like
other API functions for kctls. Since a few callers already take the
controls_rwsem locks, the patch removes those locks at the same time,
too.
Link: https://lore.kernel.org/r/20230718141304.1032-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ctl_rename() expects that card->controls_rwsem is held in the
caller side for avoiding possible races, but actually no one really
did that. It's likely because this operation is done usually only at
the device initialization where no race can happen. But, it's still
safer to take a lock, so we just take the lock inside snd_ctl_rename()
like most of other API functions do.
Link: https://lore.kernel.org/r/20230718141304.1032-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc528 ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.
For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.
Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.
Fixes: 1b6a6fc528 ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/cf95f7fe-a748-4990-8378-000491b40329@moroto.mountain
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230706155357.3470-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM memory allocation helpers have a sanity check against too many
buffer allocations. However, the check is performed without a proper
lock and the allocation isn't serialized; this allows user to allocate
more memories than predefined max size.
Practically seen, this isn't really a big problem, as it's more or
less some "soft limit" as a sanity check, and it's not possible to
allocate unlimitedly. But it's still better to address this for more
consistent behavior.
The patch covers the size check in do_alloc_pages() with the
card->memory_mutex, and increases the allocated size there for
preventing the further overflow. When the actual allocation fails,
the size is decreased accordingly.
Reported-by: BassCheck <bass@buaa.edu.cn>
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/CADm8Tek6t0WedK+3Y6rbE5YEt19tML8BUL45N2ji4ZAz1KcN_A@mail.gmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230703112430.30634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A wrong size for UMP_SYSTEM_STATUS_MIDI_TIME_CODE and case
UMP_SYSTEM_STATUS_SONG_SELECT was reported at converting to the legacy
MIDI 1.0 stream. This patch corrects the value.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230628094352.15754-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SADs of compressed formats contain the channel and sample rate
info of the audio data inside the compressed stream, but when
building constraints we must use the rates and channels used to
transport the compressed streams.
eg 48kHz 6ch EAC3 needs to be transmitted as a 2ch 192kHz stream.
This patch fixes the constraints for the common AC3 and DTS formats,
the constraints for the less common MPEG, DSD etc formats are copied
directly from the info in the SADs as before as I don't have the specs
and equipment to test those.
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230624165216.5719-1-hias@horus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yet more preliminary work for the upcoming USB gadget support.
Now export the helpers to convert between legacy MIDI1 and UMP data
for handling the MIDI 1.0 USB interface. The header file is moved to
include/sound.
The API functions are slightly changed, so that they can be used
without the direct access to snd_ump object. The allocation is done
in ump.c itself as it's a simple kcalloc().
Link: https://lore.kernel.org/r/20230623075530.10976-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a small patch set to change the UMP core for the upcoming
gadget driver support. Basically exporting a couple of helper
functions and adding a flag to suppress the internal UMP handling.
No functional changes by those alone.
Link: https://lore.kernel.org/r/20230621110241.4751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another preliminary patch for USB MIDI 2.0 gadget driver.
Export the currently local snd_ump_receive_ump_val(). It can be used
by the gadget driver for processing the UMP data.
Link: https://lore.kernel.org/r/20230621110241.4751-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another preliminary patch for USB MIDI 2.0 gadget driver.
Add a new flag, no_process_stream, to snd_ump for suppressing the UMP
Stream message handling in UMP core.
Link: https://lore.kernel.org/r/20230621110241.4751-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary patch for MIDI 2.0 USB gadget driver.
Export a new helper to allow changing the current MIDI protocol from
the outside.
Link: https://lore.kernel.org/r/20230621110241.4751-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: alsa-devel@alsa-project.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620175633.641141-2-gregkh@linuxfoundation.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For gapless playback it is possible that each track can have different
codec profile with same decoder, for example we have WMA album,
we may have different tracks as WMA v9, WMA v10 and so on
Or if DSP's like QDSP have abililty to switch decoders on single stream
for each track, then this call could be used to set new codec parameters.
Existing code does not allow to change this profile while doing gapless
playback.
Reuse existing SNDRV_COMPRESS_SET_PARAMS to set this new track params along
some additional checks to enforce proper state machine.
With this new changes now the user can call SNDRV_COMPRESS_SET_PARAMS
anytime after setting next track and additional check in write should
also ensure that params are set before writing new data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230619092805.21649-1-srinivas.kandagatla@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some info-querying code still used hw.resolution directly instead of
calling snd_timer_hw_resolution(), thus missing a possible
hw.c_resolution callback. This patch rectifies that.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the updated MIDI 2.0 spec has been published freshly, this is a
catch up to add the support for new specs, especially UMP v1.1
features, on Linux kernel.
The new UMP v1.1 introduced the concept of Function Blocks (FB), which
is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB).
The patch set adds the support for FB as the primary information
source while keeping the parse of GTB as fallback. Also UMP v1.1
supports the groupless messages, the protocol switch, static FBs, and
other new fundamental features, and those are supported as well.
Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange
Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 spec allows to inform whether the function blocks are static
and not dynamically updated. Add a new flag bit to
snd_ump_endpoint_info to reflect that attribute, too.
The flag is set when a USB MIDI device is still in the old MIDI 2.0
without UMP 1.1 support. Then the driver falls back to GTBs, and they
are supposed to be static-only.
Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 supports the protocol switch via a UMP Stream message. When
it's received, we need to take care of the midi_version field in the
corresponding sequencer client, too.
This patch introduces a new ops to notify the protocol change to
snd_seq_ump_ops for handling it.
Link: https://lore.kernel.org/r/20230612081054.17200-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing applications to track the FB active changes, this patch
adds the notification from the system port at each time a FB change is
handled and the active flag or re-grouping happens.
Link: https://lore.kernel.org/r/20230612081054.17200-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements the handling of the dynamic update of FB info.
When the FB info update is received after the initial parsing, it
means the dynamic FB info update. We compare the result, and if the
actual update is detected, it's notified via a new ops,
notify_fb_change, to the sequencer client, and the corresponding
sequencer ports are updated accordingly.
Link: https://lore.kernel.org/r/20230612081054.17200-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP Utility and Stream messages are "groupless", i.e. an incoming
groupless packet should be sent only to the UMP EP port, and the event
with the groupless message is sent to UMP EP as is without the group
translation per port.
Also, the former reserved bit 0 for the client group filter is now
used for groupless events. When the bit 0 is set, the groupless
events are filtered out and skipped.
Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the basic support for UMP Endpoint and UMP Function
Block parsing, which are extended in the new UMP v1.1 spec.
The patch provides a new helper function to perform the query of the
UMP Endpoint information and builds up the UMP blocks based on UMP
Function Block information. For the communication over the UMP
Endpoint, it opens the rawmidi device once internally, inquiries the
UMP Endpoint and Function Block info by sending new UMP Stream
messages, and waits for the response for each query.
The new UMP spec allows to update the FB info and change its
associated groups or its activeness on the fly, too. For catching it,
the UMP core keeps watching the incoming UMP messages, and
snd_ump_receive() handles the incoming UMP Stream messages to refresh
the FB info.
Link: https://lore.kernel.org/r/20230612081054.17200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info
that are added in the new v1.1 spec. Those are filled by the UMP Stream
messages.
The rawmidi protocol version is bumped to 2.0.4 to indicate those
updates.
Also, update the proc outputs to show the newly introduced fields.
Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't need to change the numid at each time snd_ctl_rename_id() is
called, as the control element size itself doesn't change. Let's keep
the previous numid value.
Along with it, add a note about calling this function only in the
card init phase.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606094035.14808-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the read event packet size in snd_seq_read() is defined by
client->midi_version value that is guaranteed to be zero if UMP isn't
enabled. But the static analyzer doesn't know of the fact, and it
still suspects as if it were leading to a potential overflow.
Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the
aligned_size value for avoiding the confusion.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305261415.NY0vapZK-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.
For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.
The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.
As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.
A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.
The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.
Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.
The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).
The updates for alsa-lib and alsa-utils will follow shortly later.
The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.
Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new filter bitmap for UMP groups for reducing the unnecessary
read/write when the client is connected to UMP EP seq port.
The new group_filter field contains the bitmap for the groups, i.e.
when the bit is set, the corresponding group is filtered out and
the messages to that group won't be delivered.
The filter bitmap consists of each bit of 1-based UMP Group number.
The bit 0 is reserved for the future use.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enhances the /proc/asound/seq/clients output to show a few
more information about the assigned UMP Endpoint and Blocks.
The "Groups" are shown in 1-based group number to align with the
sequencer client name and port number.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-36-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new ioctls for sequencer clients to query and set the UMP endpoint
and block information.
As a sequencer client corresponds to a UMP Endpoint, one UMP Endpoint
information can be assigned at most to a single sequencer client while
multiple UMP block infos can be assigned by passing the type with the
offset of block id (i.e. type = block_id + 1).
For the kernel client, only SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO is
allowed.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a sequencer port for broadcasting the all group inputs at the
port number 0. This corresponds to a UMP Endpoint connection;
application can read all UMP events from this port no matter which
group the UMP packet belongs to.
Unlike seq ports for other UMP groups, a UMP Endpoint port has no
SND_SEQ_PORT_TYPE_MIDI_GENERIC bit, so that it won't be treated as a
normal MIDI 1.0 device from legacy applications.
The port is named as "MIDI 2.0" to align with representations on other
operation systems.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces a new ALSA sequencer client for the kernel UMP
object, snd-seq-ump-client. It's a UMP version of snd-seq-midi
driver, while this driver creates a sequencer client per UMP endpoint
which contains (fixed) 16 ports.
The UMP rawmidi device is opened in APPEND mode for output, so that
multiple sequencer clients can share the same UMP endpoint, as well as
the legacy UMP rawmidi devices that are opened in APPEND mode, too.
For input, on the other hand, the incoming data is processed on the
fly in the dedicated hook, hence it doesn't open a rawmidi device.
The UMP packet group is updated upon delivery depending on the target
sequencer port (which corresponds to the actual UMP group).
Each sequencer port sets a new port type bit,
SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard
types for MIDI.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A sequencer client like seq_dummy rather doesn't want to convert UMP
events but receives / sends as is. Add a new event filter flag to
suppress the automatic UMP conversion and applies accordingly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables the automatic conversion of UMP events from/to the
legacy ALSA sequencer MIDI events. Also, as UMP itself has two
different modes (MIDI 1.0 and MIDI 2.0), yet another converters
between them are needed, too. Namely, we have conversions between the
legacy and UMP like:
- seq legacy event -> seq UMP MIDI 1.0 event
- seq legacy event -> seq UMP MIDI 2.0 event
- seq UMP MIDI 1.0 event -> seq legacy event
- seq UMP MIDI 2.0 event -> seq legacy event
and the conversions between UMP MIDI 1.0 and 2.0 clients like:
- seq UMP MIDI 1.0 event -> seq UMP MIDI 2.0 event
- seq UMP MIDI 2.0 event -> seq UMP MIDI 1.0 event
The translation is per best-effort; some MIDI 2.0 specific events are
ignored when translated to MIDI 1.0.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add yet more new filed "ump_group" to snd_seq_port_info for specifying
the associated UMP Group number for each sequencer port. This will be
referred in the upcoming automatic UMP conversion in sequencer core.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new field "direction" to snd_seq_port_info for allowing a client
to tell the expected direction of the port access. A port might still
allow subscriptions for read/write (e.g. for MIDI-CI) even if the
primary usage of the port is a single direction (either input or
output only). This new "direction" field can help to indicate such
cases.
When the direction is unspecified at creating a port and the port has
either read or write capability, the corresponding direction bits are
set automatically as default.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an extension to ALSA sequencer infrastructure to support the
MIDI 2.0 UMP Endpoint port. It's a "catch-all" port that is supposed
to be present for each UMP Endpoint. When this port is read via
subscription, it sends any events from all ports (UMP Groups) found in
the same client.
A UMP Endpoint port can be created with the new capability bit
SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT. Although the port assignment isn't
strictly defined, it should be the port number 0.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This extends the ALSA sequencer port capability bit to indicate the
"inactive" flag. When this flag is set, the port is essentially
invisible, and doesn't appear in the port query ioctls, while the
direct access and the connection to this port are still allowed. The
active/inactive state can be flipped dynamically, so that it can be
visible at any time later.
This feature is introduced basically for UMP; some UMP Groups in a UMP
Block may be unassigned, hence those are practically invisible. On
ALSA sequencer, the corresponding sequencer ports will get this new
"inactive" flag to indicate the invisible state.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Starting from this commit, we add the basic support of UMP (Universal
MIDI Packet) events on ALSA sequencer infrastructure. The biggest
change here is that, for transferring UMP packets that are up to 128
bits, we extend the data payload of ALSA sequencer event record when
the client is declared to support for the new UMP events.
A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be
set for the UMP packet events that have the larger payload of 128
bits, defined as struct snd_seq_ump_event.
For controlling the UMP feature enablement in kernel, a new Kconfig,
CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is
available only when this Kconfig item is set. Similarly, the size of
the internal snd_seq_event_cell also increases (in 4 bytes) when the
Kconfig item is set. (But the size increase is effective only for
32bit architectures; 64bit archs already have padding there.)
Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the
event and cell, keeping the old sizes.
For applications that want to access the UMP packets, first of all, a
sequencer client has to declare the user-protocol to match with the
latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's
treated as if a legacy client without UMP support.
Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0)
with a new field, midi_version, in snd_seq_client_info. When switched
to UMP mode (midi_version = 1 or 2), the client can write the UMP
events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size
is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32
bytes). When a UMP sequencer event is delivered to a legacy sequencer
client, it's ignored or handled as an error.
Conceptually, ALSA sequencer client and port correspond to the UMP
Endpoint and Group, respectively; each client may have multiple ports
and each port has the fixed number (16) of channels, total up to 256
channels.
As of this commit, ALSA sequencer core just sends and receives the UMP
events as-is from/to clients. The automatic conversions between the
legacy events and the new UMP events will be implemented in a later
patch.
Along with this commit, bump the sequencer protocol version to 1.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the future extension of ALSA sequencer ABI, introduce a new ioctl
SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used
in PCM and other interfaces, for an application to specify its
supporting ABI version.
The use of this ioctl will be mandatory for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some port numbers are special, such as 254 for subscribers and 255 for
broadcast. Return error if application tries to create such a port.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The client type and the port info validity check should be done before
actually creating a port, instead of unnecessary create-and-scratch.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We didn't check if a port with the given port number has been already
present at creating a new port. Check it and return -EBUSY properly
if the port number conflicts.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce the new helpers, snd_seq_kernel_client_get() and _put() for
kernel client drivers to treat the snd_seq_client more directly.
This allows us to reduce the exported symbols and APIs at each time we
need to access some field in future.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a new variant of snd_seq_expand_var_event() for expanding the
data starting from the given byte offset. It'll be used by the new
UMP sequencer code later.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There can be a small memory hole that may not be cleared at expanding
an event with the variable length type. Make sure to clear it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends the UMP core code to support the legacy MIDI 1.0
rawmidi devices. When the new kconfig CONFIG_SND_UMP_LEGACY_RAWMIDI
is set, the UMP core allows to attach an additional rawmidi device for
each UMP Endpoint. The rawmidi device contains 16 substreams where
each substream corresponds to a UMP Group belonging to the EP. The
device reads/writes the legacy MIDI 1.0 byte streams and translates
from/to UMP packets.
The legacy rawmidi devices are exclusive with the UMP rawmidi devices,
hence both of them can't be opened at the same time unless the UMP
rawmidi is opened in APPEND mode.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a code refactoring for abstracting the rawmidi access to the
UMP's own helpers. It's a preliminary work for the later code
refactoring of the UMP layer.
Until now, we access to the rawmidi substream directly from the
driver via rawmidi access helpers, but after this change, the driver
is supposed to access via the newly introduced snd_ump_ops and
receive/transmit via snd_ump_receive() and snd_ump_transmit() helpers.
As of this commit, those are merely wrappers for the rawmidi
substream, and no much function change is seen here.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP devices may have more interesting information than the traditional
rawmidi. Extend the rawmidi_global_ops to allow the optional proc
info output and show some more bits in the proc file for UMP.
Note that the "Groups" field shows the first and the last UMP Groups,
and both numbers are 1-based (i.e. the first group is 1).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It'd be convenient to have ioctls to inquiry the UMP Endpoint and UMP
Block information directly via the control API without opening the
rawmidi interface, just like SNDRV_CTL_IOCTL_RAWMIDI_INFO.
This patch extends the rawmidi ioctl handler to support those; new
ioctls, SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO and
SNDRV_CTL_IOCTL_UMP_BLOCK_INFO, return the snd_ump_endpoint and
snd_ump_block data that is specified by the device field,
respectively.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Applications may look for rawmidi devices with the ioctl
SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE. Returning a UMP device from this
ioctl may confuse the existing applications that support only the
legacy rawmidi.
This patch changes the code to skip the UMP devices from the lookup
for avoiding the confusion, and introduces a new ioctl to look for the
UMP devices instead.
Along with this change, bump the CTL protocol version to 2.0.9.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support helpers for UMP (Universal MIDI Packet) in
ALSA core.
The basic design is that a rawmidi instance is assigned to each UMP
Endpoint. A UMP Endpoint provides a UMP stream, typically
bidirectional (but can be also uni-directional, too), which may hold
up to 16 UMP Groups, where each UMP (input/output) Group corresponds
to the traditional MIDI I/O Endpoint.
Additionally, the ALSA UMP abstraction provides the multiple UMP
Blocks that can be assigned to each UMP Endpoint. A UMP Block is a
metadata to hold the UMP Group clusters, and can represent the
functions assigned to each UMP Group. A typical implementation of UMP
Block is the Group Terminal Blocks of USB MIDI 2.0 specification.
For distinguishing from the legacy byte-stream MIDI device, a new
device "umpC*D*" will be created, instead of the standard (MIDI 1.0)
devices "midiC*D*". The UMP instance can be identified by the new
rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too.
A UMP rawmidi device reads/writes only in 4-bytes words alignment,
stored in CPU native endianness.
The transmit and receive functions take care of the input/out data
alignment, and may return zero or aligned size, and the params ioctl
may return -EINVAL when the given input/output buffer size isn't
aligned.
A few new UMP-specific ioctls are added for obtaining the new UMP
endpoint and block information.
As of this commit, no ALSA sequencer instance is attached to UMP
devices yet. They will be supported by later patches.
Along with those changes, the protocol version for rawmidi is bumped
to 2.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new callback, ioctl, is added to snd_rawmidi_global_ops for allowing
the driver to deal with the own ioctls. This is another preparation
patch for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_rawmidi_kernel_open() is used only internally from ALSA sequencer,
so far, and parsing the card / device matching table at each open is
redundant, as each sequencer client already gets the rawmidi object
beforehand.
This patch optimizes the path by passing the rawmidi object directly
at snd_rawmidi_kernel_open(). This is also a preparation for the
upcoming UMP rawmidi I/O support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This workaround fails to address the underlying problem, which is
actually wholly self-made. Subsequent patches will fix it.
This reverts commit 56385a12d9.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SNDRV_CTL_ELEM_TYPE_* are type of snd_ctl_elem_type_t, we
have to __force cast them to int when comparing them with int
to fix the following sparse warnings.
sound/core/control_compat.c:203:14: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:205:14: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:207:14: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:209:14: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:237:21: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:238:21: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:270:21: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
sound/core/control_compat.c:271:21: sparse: warning: restricted snd_ctl_elem_type_t degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230516223806.185683-1-minhuadotchen@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are collections of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most
of it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused
a regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup,
and some documentation updates.
-----BEGIN PGP SIGNATURE-----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=jd8l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused a
regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
some documentation updates"
* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
ALSA: pcm: playback silence - move silence variable updates to separate function
ALSA: pcm: playback silence - remove extra code
ALSA: pcm: fix playback silence - correct incremental silencing
ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
ALSA: docs: Fix code block indentation in ALSA driver example
ALSA: docs: Extend module parameters description
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
ALSA: emu10k1: use more existing defines instead of open-coded numbers
ASoC: amd: yc: Add ASUS M3402RA into DMI table
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
...
Takashi Iwai
Linus Torvalds
Steven Rostedt (Google)
Takashi Sakamoto
Colin Ian King
Andy Shevchenko
Pavel Hofman
Heiner Kallweit
Nathan Chancellor
Jaroslav Kysela
Arnd Bergmann
Masahiro Yamada
Ricardo B. Marliere
Ivan Orlov
Dmitry Antipov
Dave Airlie
Jason Zhang
Cezary Rojewski
Maxime Ripard
Jani Nikula
David Howells
Peter Ujfalusi
Wang Weiyang
Minjie Du
Matthias Reichl
Srinivas Kandagatla
Oswald Buddenhagen
Min-Hua Chen