mirror of https://github.com/torvalds/linux.git
1083 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Alex Williamson
|
bc0b828ef6 |
Revert "PCI: Avoid reset when disabled via sysfs"
This reverts commit |
|
Bjorn Helgaas
|
dea140198b |
Merge branch 'pci/misc'
- Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) - Fix typos and whitespace errors (Bjorn Helgaas) * pci/misc: PCI: Fix typos tools/Makefile: Remove pci target # Conflicts: # drivers/pci/endpoint/functions/pci-epf-test.c |
|
|
Bjorn Helgaas
|
38d42a6612 |
Merge branch 'pci/resource'
- Use pci_resource_n() to simplify BAR/window resource lookup (Ilpo
Järvinen)
- Fix typo that repeatedly distributed resources to a bridge instead of
iterating over subordinate bridges, which resulted in too little space to
assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV BARs,
to avoid failures when removing and re-adding devices (Ilpo Järvinen)
- Fix a double counting error for I/O resources, as we previously did for
memory resources (Ilpo Järvinen)
- Use resource_set_{range,size}() helpers in more places (Ilpo Järvinen)
- Add pci_resource_is_iov() to identify IOV resources (Ilpo Järvinen)
- Add pci_resource_num() to look up the BAR number from the resource
pointer (Ilpo Järvinen)
- Add restore_dev_resource() to simplify code that resources saved device
resources (Ilpo Järvinen)
- Allow drivers to enable devices even if we haven't assigned optional IOV
resources to them (Ilpo Järvinen)
- Improve debug output during resource reallocation (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce failures
if we can't allocate them (Ilpo Järvinen)
- Move declarations of pci_rescan_bus_bridge_resize(),
pci_reassign_bridge_resources(), and CardBus-related sizes from
include/linux/pci.h to drivers/pci/pci.h since they're not used outside
the PCI core (Ilpo Järvinen)
- Make pci_setup_bridge() static (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults in some
cases, which broke vfio-pci lazy mapping on first access (Niklas
Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was
disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices (Niklas
Schnelle)
* pci/resource:
s390/pci: Support mmap() of PCI resources except for ISM devices
s390/pci: Introduce pdev->non_mappable_bars and replace VFIO_PCI_MMAP
s390/pci: Fix s390_mmio_read/write syscall page fault handling
PCI: Fix NULL dereference in SR-IOV VF creation error path
PCI: Move cardbus IO size declarations into pci/pci.h
PCI: Make pci_setup_bridge() static
PCI: Move resource reassignment func declarations into pci/pci.h
PCI: Move pci_rescan_bus_bridge_resize() declaration to pci/pci.h
PCI: Fix BAR resizing when VF BARs are assigned
PCI: Do not claim to release resource falsely
PCI: Increase Resizable BAR support from 512 GB to 128 TB
PCI: Rework optional resource handling
PCI: Perform reset_resource() and build fail list in sync
PCI: Use res->parent to check if resource is assigned
PCI: Add debug print when releasing resources before retry
PCI: Indicate optional resource assignment failures
PCI: Always have realloc_head in __assign_resources_sorted()
PCI: Extend enable to check for any optional resource
PCI: Add restore_dev_resource()
PCI: Remove incorrect comment from pci_reassign_resource()
PCI: Consolidate assignment loop next round preparation
PCI: Rename retval to ret
PCI: Use while loop and break instead of gotos
PCI: Refactor pdev_sort_resources() & __dev_sort_resources()
PCI: Converge return paths in __assign_resources_sorted()
PCI: Add dev & res local variables to resource assignment funcs
PCI: Add pci_resource_num() helper
PCI: Check resource_size() separately
PCI: Add pci_resource_is_iov() to identify IOV resources
PCI: Use resource_set_{range,size}() helpers
PCI: Use SZ_* instead of literals in setup-bus.c
PCI: Fix old_size lower bound in calculate_iosize() too
PCI: Allow relaxed bridge window tail sizing for optional resources
PCI: Simplify size1 assignment logic
PCI: Use min_align, not unrelated add_align, for size0
PCI: Remove add_align overwrite unrelated to size0
PCI: Use downstream bridges for distributing resources
PCI: Cleanup dev->resource + resno to use pci_resource_n()
|
|
|
Bjorn Helgaas
|
a7a8e7996c |
Merge branch 'pci/reset'
- Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) * pci/reset: PCI: Avoid reset when disabled via sysfs PCI: Log debug messages about reset method |
|
|
Bjorn Helgaas
|
e91c25c6fc |
Merge branch 'pci/pm'
- Allow PCI bridges to go to D3Hot on all non-x86 systems (Manivannan Sadhasivam) * pci/pm: PCI: Allow PCI bridges to go to D3Hot on all non-x86 |
|
|
Bjorn Helgaas
|
e9e224dadd |
Merge branch 'pci/enumeration'
- Enable Configuration RRS SV early instead of during child bus scanning (Bjorn Helgaas) - Cache offset of Resizable BAR capability to avoid redundant searches for it (Bjorn Helgaas) - Fix reference leaks in pci_register_host_bridge() and pci_alloc_child_bus() (Ma Ke) - Drop put_device() in pci_register_host_bridge() left over from converting device_register() to device_add() (Dan Carpenter) * pci/enumeration: PCI: Remove stray put_device() in pci_register_host_bridge() PCI: Fix reference leak in pci_alloc_child_bus() PCI: Fix reference leak in pci_register_host_bridge() PCI: Cache offset of Resizable BAR capability PCI: Enable Configuration RRS SV early |
|
|
Bjorn Helgaas
|
67b9f18202 |
Merge branch 'pci/devres'
- Enlarge the devres table[] to accommodate bridge windows, ROM, IOV BARs, etc (Philipp Stanner) - Validate BAR index in devres interfaces (Philipp Stanner) * pci/devres: PCI: Check BAR index for validity PCI: Fix wrong length of devres array |
|
|
Bjorn Helgaas
|
5a04a18b1a |
Merge branch 'pci/aer'
- Implement local aer_printk() since AER is the only place that prints a message with level depending on the error severity (Ilpo Järvinen) * pci/aer: PCI/ERR: Handle TLP Log in Flit mode PCI: Track Flit Mode Status & print it with link status PCI/AER: Descope pci_printk() to aer_printk() |
|
Manivannan Sadhasivam
|
a5fb3ff632 |
PCI: Allow PCI bridges to go to D3Hot on all non-x86
Currently, pci_bridge_d3_possible() encodes a variety of decision factors when deciding whether a given bridge can be put into D3. A particular one of note is for "recent enough PCIe ports." Per Rafael [0]: "There were hardware issues related to PM on x86 platforms predating the introduction of Connected Standby in Windows. For instance, programming a port into D3hot by writing to its PMCSR might cause the PCIe link behind it to go down and the only way to revive it was to power cycle the Root Complex. And similar." Thus, this function contains a DMI-based check for post-2015 BIOS. The above factors (Windows, x86) don't really apply to non-x86 systems, and also, many such systems don't have BIOS or DMI. However, we'd like to be able to suspend bridges on non-x86 systems too. Restrict the "recent enough" check to x86. If we find further incompatibilities, it probably makes sense to expand on the deny-list approach (i.e., bridge_d3_blacklist or similar). Link: https://lore.kernel.org/r/20250320110604.v6.1.Id0a0e78ab0421b6bce51c4b0b87e6aebdfc69ec7@changeid Link: https://lore.kernel.org/linux-pci/CAJZ5v0j_6jeMAQ7eFkZBe5Yi+USGzysxAgfemYh=-zq4h5W+Qg@mail.gmail.com/ [0] Link: https://lore.kernel.org/linux-pci/20240227225442.GA249898@bhelgaas/ [1] Link: https://lore.kernel.org/linux-pci/20240828210705.GA37859@bhelgaas/ [2] [Brian: rewrite to !X86 based on Rafael's suggestions] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Philipp Stanner
|
b1a7f99967 |
PCI: Check BAR index for validity
Many functions in PCI use accessor macros such as pci_resource_len(), which take a BAR index. That index, however, is never checked for validity, potentially resulting in undefined behavior by overflowing the array pci_dev.resource in the macro pci_resource_n(). Since many users of those macros directly assign the accessed value to an unsigned integer, the macros cannot be changed easily anymore to return -EINVAL for invalid indexes. Consequently, the problem has to be mitigated in higher layers. Add pci_bar_index_valid(). Use it where appropriate. Link: https://lore.kernel.org/r/20250312080634.13731-4-phasta@kernel.org Closes: https://lore.kernel.org/all/adb53b1f-29e1-3d14-0e61-351fd2d3ff0d@linux.intel.com/ Reported-by: Bingbu Cao <bingbu.cao@linux.intel.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> [kwilczynski: correct if-statement condition the pci_bar_index_is_valid() helper function uses, tidy up code comments] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: fix typo] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Bjorn Helgaas
|
a7eb9124d9 |
PCI: Cache offset of Resizable BAR capability
Previously most resizable BAR interfaces (pci_rebar_get_possible_sizes(), pci_rebar_set_size(), etc) as well as pci_restore_state() searched config space for a Resizable BAR capability. Most devices don't have such a capability, so this is wasted effort, especially for pci_restore_state(). Search for a Resizable BAR capability once at enumeration-time and cache the offset so we don't have to search every time we need it. No functional change intended. Link: https://lore.kernel.org/r/20250215000301.175097-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
|
|
Bjorn Helgaas
|
f4e026f454 |
PCI: Fix typos
Fix typos and whitespace errors. Link: https://lore.kernel.org/r/20250307231715.438518-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Zhiyuan Dai
|
5af473941b |
PCI: Increase Resizable BAR support from 512 GB to 128 TB
Per PCIe r6.0, sec 7.8.6.2, devices can advertise Resizable BAR sizes up to 128 TB in the Resizable BAR Capability register. Larger sizes can be advertised via the Capability register, but that requires an API change. Update pci_rebar_get_possible_sizes() and pbus_size_mem() to increase the sizes we currently support from 512 GB to 128 TB. Link: https://lore.kernel.org/r/20250307053535.44918-1-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Nishanth Aravamudan
|
479380efe1 |
PCI: Avoid reset when disabled via sysfs
After |
|
|
Bjorn Helgaas
|
800ce277f4 |
PCI: Log debug messages about reset method
Log pci_dbg() messages about the reset methods we attempt and any errors (-ENOTTY means "try the next method"). Set CONFIG_DYNAMIC_DEBUG=y and enable by booting with dyndbg="file drivers/pci/* +p" or enable at runtime: # echo "file drivers/pci/* +p" > /sys/kernel/debug/dynamic_debug/control Link: https://lore.kernel.org/r/20250303204220.197172-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> |
|
Ilpo Järvinen
|
79c731e20d |
PCI: Track Flit Mode Status & print it with link status
PCIe r6.0 added Flit mode, which mainly alters HW behavior, but there are some OS visible changes. The OS visible changes include differences in the layout of some capabilities and interpretation of the TLP headers (in diagnostics situations). To be able to determine which mode the PCIe Link is using, store the Flit Mode Status (PCIe r6.1 sec 7.5.3.20) information in addition to the Link speed into struct pci_bus in pcie_update_link_speed(). Link: https://lore.kernel.org/r/20250207161836.2755-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: use unsigned int:1 instead of bool, update flit_mode setting] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Tushar Dave
|
9cf8a952d5 |
PCI/ACS: Fix 'pci=config_acs=' parameter
Commit |
|
|
Ilpo Järvinen
|
addb30c5bd |
PCI: Cleanup dev->resource + resno to use pci_resource_n()
Replace pointer arithmetic in finding the correct resource entry with the pci_resource_n() helper. Link: https://lore.kernel.org/r/20250207162301.2842-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Linus Torvalds
|
647d69605c |
pci-v6.14-changes
-----BEGIN PGP SIGNATURE-----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=O62O
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
|
|
|
Bjorn Helgaas
|
10ff5bbfd4 |
Merge branch 'pci/misc'
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM ACPI hotplug driver (Thomas Weißschuh) - Update PCI_EXP_LNKCAP_SLS comment (Lukas Wunner) - Drop superfluous pm_wakeup.h include (Wolfram Sang) - Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong Zhang) - Correct documentation of the 'config_acs=' kernel parameter (Akihiko Odaki) * pci/misc: Documentation: Fix pci=config_acs= example PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT PCI: Don't include 'pm_wakeup.h' directly PCI: Update code comment on PCI_EXP_LNKCAP_SLS for PCIe r3.0 PCI/ACPI: Constify 'struct bin_attribute' PCI/P2PDMA: Constify 'struct bin_attribute' PCI/VPD: Constify 'struct bin_attribute' PCI/sysfs: Constify 'struct bin_attribute' |
|
|
Bjorn Helgaas
|
ec3619abbf |
Merge branch 'pci/controller/iommu-map'
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
|
|
|
Bjorn Helgaas
|
60b5cd4f82 |
Merge branch 'pci/pci-sysfs'
- Move reset related sysfs code from pci.c to pci-sysfs.c where other similar code lives (Ilpo Järvinen) - Simplify reset_method_store() memory management by using __free() instead of explicit kfree() cleanup (Ilpo Järvinen) - Drop unnecessary zero initializer (Ilpo Järvinen) * pci/pci-sysfs: PCI/sysfs: Remove unnecessary zero in initializer PCI/sysfs: Use __free() in reset_method_store() PCI/sysfs: Move reset related sysfs code to correct file |
|
|
Bjorn Helgaas
|
f4a09274c5 |
Merge branch 'pci/err'
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging rather than building their own (Ilpo Järvinen) - Move TLP Log handling to its own file (Ilpo Järvinen) - Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen) - Store number of supported End-End TLP Prefixes always so we can read the correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen) - Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log() (Ilpo Järvinen) - Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix Log (Ilpo Järvinen) * pci/err: PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log PCI: Add TLP Prefix reading to pcie_read_tlp_log() PCI: Store number of supported End-End TLP Prefixes PCI: Use unsigned int i in pcie_read_tlp_log() PCI: Use same names in pcie_read_tlp_log() prototype and definition PCI: Add defines for TLP Header/Prefix log sizes PCI: Move TLP Log handling to its own file PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem |
|
Wolfram Sang
|
816875a468 |
PCI: Don't include 'pm_wakeup.h' directly
The header clearly states that it does not want to be included directly, only via 'device.h'. The 'platform_device.h' works equally well. Thus, remove the direct inclusion. Link: https://lore.kernel.org/r/20241118072917.3853-12-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Philipp Stanner
|
dfa2f4d5f9 |
PCI: Remove devres from pci_intx()
pci_intx() is a hybrid function which can sometimes be managed through devres. This hybrid nature is undesirable. Since all users of pci_intx() have by now been ported either to always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the devres functionality can be removed from pci_intx(). Consequently, pci_intx_unmanaged() is now redundant, because pci_intx() itself is now unmanaged. Remove the devres functionality from pci_intx(). Have all users of pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged(). Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> |
|
|
Philipp Stanner
|
f546e8033d |
PCI: Export pci_intx_unmanaged() and pcim_intx()
pci_intx() is a hybrid function which sometimes performs devres operations, depending on whether pcim_enable_device() has been used to enable the pci_dev. This sometimes-managed nature of the function is problematic. Notably, it causes the function to allocate under some circumstances which makes it unusable from interrupt context. Export pcim_intx() (which is always managed) and rename __pcim_intx() (which is never managed) to pci_intx_unmanaged() and export it as well. Then all callers of pci_intx() can be ported to the version they need, depending whether they use pci_enable_device() or pcim_enable_device(). Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> |
|
Frank Li
|
a3751212a8
|
PCI: Add enable_device() and disable_device() callbacks for bridges
Some PCI host bridges require special handling when enabling or disabling PCI devices. For example, the i.MX95 platform has a lookup table to map Requester IDs to StreamIDs, which the SMMU and MSI controller use to identify the source of DMA accesses. Without this mapping, DMA accesses may target unintended memory, which would corrupt memory or read the wrong data. Add a host bridge enable_device() hook the imx6 driver can use to configure the Requester ID to StreamID mapping. The hardware table isn't big enough to map all possible Requester IDs, so this hook may fail if no table space is available. In that case, return failure from pci_enable_device(). It might make more sense to make pci_set_master() decline to enable bus mastering and return failure, but it currently doesn't have a way to return failure. Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-1-39f58dbed03a@nxp.com Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
|
|
Ilpo Järvinen
|
10269d5781
|
PCI/sysfs: Move reset related sysfs code to correct file
Most PCI sysfs code and structs are in a dedicated file but a few reset related things remain in pci.c. Move also them to pci-sysfs.c and drop pci_dev_reset_method_attr_is_visible() as it is 100% duplicate of pci_dev_reset_attr_is_visible(). Link: https://lore.kernel.org/r/20241028174046.1736-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> |
|
|
Ilpo Järvinen
|
a71c59269e |
PCI: Move TLP Log handling to its own file
TLP Log is a PCIe feature and is processed only by AER and DPC. Configwise, DPC depends AER being enabled. In lack of better place, the TLP Log handling code was initially placed into pci.c but it can be easily placed in a separate file. Move TLP Log handling code to its own file under pcie/ subdirectory and include it only when AER is enabled. Link: https://lore.kernel.org/r/20250114170840.1633-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com> |
|
|
Ilpo Järvinen
|
013525583f |
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
pcie_read_tlp_log() was exposed by the commit
|
|
Lukas Wunner
|
3202ca2215
|
PCI: Honor Max Link Speed when determining supported speeds
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes:
|
|
|
Philipp Stanner
|
9dfc6850cf |
PCI: Encourage resource request API users to supply driver name
PCI region request functions have a @name parameter (sometimes called "res_name"). It is used in a log message to inform drivers about request collisions, e.g., when another driver has requested that region already. This message is only useful when it contains the actual owner of the region, i.e., which driver requested it. So far, a great many drivers misuse the @name parameter and just pass pci_name(), which doesn't result in useful debug information. Rename "res_name" to "name". Detail @name's purpose in the docstrings. Link: https://lore.kernel.org/r/20241203100023.31152-2-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> [bhelgaas: tweak comment wording to include "driver"] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
|
Linus Torvalds
|
1746db26f8 |
pci-v6.13-changes
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
|
Bjorn Helgaas
|
2d56427989 |
Merge branch 'pci/misc'
- Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Remove kerneldoc return value descriptions from hotplug registration interfaces that don't return anything (Ilpo Järvinen) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan) * pci/misc: tools: PCI: Fix incorrect printf format specifiers PCI: Simplify pci_create_slot() logic PCI: Fix reset_method_store() memory leak PCI: hotplug: Remove "Returns" kerneldoc from void functions PCI: hotplug: Reorganize kerneldoc parameter names |
|
|
Bjorn Helgaas
|
ab02bafcec |
Merge branch 'pci/tph'
- Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to direct DMA writes closer to their consumers (Wei Huang) * pci/tph: PCI/TPH: Add TPH documentation PCI/TPH: Add Steering Tag support PCI: Add TLP Processing Hints (TPH) support |
|
|
Bjorn Helgaas
|
c03d361c20 |
Merge branch 'pci/resource'
- Add resource_set_size() to set resource size when start has already been
set (Ilpo Järvinen)
- Add resource_set_range() helper to set both resource start and size (Ilpo
Järvinen)
- Use IS_ALIGNED() and resource_size() in quirk_s3_64M() instead of
open-coding them (Ilpo Järvinen)
- Add ALIGN_DOWN_IF_NONZERO() to avoid code duplication when distributing
resources across devices (Ilpo Järvinen)
- Improve pdev_sort_resources() warning message to be more specific (Ilpo
Järvinen)
* pci/resource:
PCI: Improve pdev_sort_resources() warning message
PCI: Add ALIGN_DOWN_IF_NONZERO() helper
PCI: Use align and resource helpers, and SZ_* in quirk_s3_64M()
PCI: Use resource_set_{range,size}() helpers
resource: Add resource set range and size helpers
|
|
|
Bjorn Helgaas
|
d985e2beb9 |
Merge branch 'pci/reset'
- Add sysfs 'reset_subordinate' to reset hierarchy below bridge (Keith Busch) - Warn if we reset a running device where driver didn't register pci_error_handlers notification callbacks (Keith Busch) * pci/reset: PCI: Warn if a running device is unaware of reset PCI: Add 'reset_subordinate' to reset hierarchy below bridge |
|
|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
|
|
Ilpo Järvinen
|
665745f274 |
PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller
This mostly reverts the commit |
|
Keith Busch
|
a3151e6daa |
PCI: Warn if a running device is unaware of reset
If a reset is issued to a running device with a driver that didn't register the notification callbacks, the driver may be unaware of this event and have an inconsistent view of the device's state. Log a warning of this event because there's nothing else indicating the event occured, which could be confusing when debugging such situations. Link: https://lore.kernel.org/r/20241025222755.3756162-2-kbusch@meta.com Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> |
|
|
Keith Busch
|
2fa046449a |
PCI: Add 'reset_subordinate' to reset hierarchy below bridge
The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary Bus Reset on the bridge leading to the device. These only work if the device is the only device below the bridge. Add a sysfs 'reset_subordinate' attribute on bridges that can assert Secondary Bus Reset regardless of how many devices are below the bridge. This resets all the devices below a bridge in a single command, including the locking and config space save/restore that reset methods normally do. This may be the only way to reset devices that don't support other reset methods (ACPI, FLR, PM reset, etc). Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com Signed-off-by: Keith Busch <kbusch@kernel.org> [bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com> |
|
|
Ilpo Järvinen
|
d2bd39c045 |
PCI: Store all PCIe Supported Link Speeds
The PCIe bandwidth controller added by a subsequent commit will require selecting PCIe Link Speeds that are lower than the Maximum Link Speed. The struct pci_bus only stores max_bus_speed. Even if PCIe r6.1 sec 8.2.1 currently disallows gaps in supported Link Speeds, the Implementation Note in PCIe r6.1 sec 7.5.3.18, recommends determining supported Link Speeds using the Supported Link Speeds Vector in the Link Capabilities 2 Register (when available) to "avoid software being confused if a future specification defines Links that do not require support for all slower speeds." Reuse code in pcie_get_speed_cap() to add pcie_get_supported_speeds() to query the Supported Link Speeds Vector of a PCIe device. The value is taken directly from the Supported Link Speeds Vector or synthesized from the Max Link Speed in the Link Capabilities Register when the Link Capabilities 2 Register is not available. The Supported Link Speeds Vector in the Link Capabilities Register 2 corresponds to the bus below on Root Ports and Downstream Ports, whereas it corresponds to the bus above on Upstream Ports and Endpoints (PCIe r6.1 sec 7.5.3.18): Supported Link Speeds Vector - This field indicates the supported Link speed(s) of the associated Port. Add supported_speeds into the struct pci_dev that caches the Supported Link Speeds Vector. supported_speeds contains a set of Link Speeds only in the case where PCIe Link Speed can be determined. Root Complex Integrated Endpoints do not have a well-defined Link Speed because they do not implement either of the Link Capabilities Registers, which is allowed by PCIe r6.1 sec 7.5.3 (the same limitation applies to determining cur_bus_speed and max_bus_speed that are PCI_SPEED_UNKNOWN in such case). This is of no concern from PCIe bandwidth controller point of view because such devices are not attached into a PCIe Root Port that could be controlled. The supported_speeds field keeps the extra reserved zero at the least significant bit to match the Link Capabilities 2 Register layout. An attempt was made to store supported_speeds field into the struct pci_bus as an intersection of both ends of the Link, however, the subordinate struct pci_bus is not available early enough. The Target Speed quirk (in pcie_failed_link_retrain()) can run either during initial scan or later, requiring it to use the API provided by the PCIe bandwidth controller to set the Target Link Speed in order to co-exist with the bandwidth controller. When the Target Speed quirk is calling the bandwidth controller during initial scan, the struct pci_bus is not yet initialized. As such, storing supported_speeds into the struct pci_bus is not viable. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20241018144755.7875-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: move pcie_get_supported_speeds() decl to drivers/pci/pci.h] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
|
Jason Gunthorpe
|
f3c3ccc4fe |
PCI: Fix pci_enable_acs() support for the ACS quirks
There are ACS quirks that hijack the normal ACS processing and deliver to
to special quirk code. The enable path needs to call
pci_dev_specific_enable_acs() and then pci_dev_specific_acs_enabled() will
report the hidden ACS state controlled by the quirk.
The recent rework got this out of order and we should try to call
pci_dev_specific_enable_acs() regardless of any actual ACS support in the
device.
As before command line parameters that effect standard PCI ACS don't
interact with the quirk versions, including the new config_acs= option.
Link: https://lore.kernel.org/r/0-v1-f96b686c625b+124-pci_acs_quirk_fix_jgg@nvidia.com
Fixes:
|
|
Rob Herring (Arm)
|
f68303cf1c |
PCI: Constify pci_register_io_range() fwnode_handle
pci_register_io_range() does not modify the passed in fwnode_handle, so make it const. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241010-dt-const-v1-1-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
|
|
Ilpo Järvinen
|
783602c920 |
PCI: Use resource_set_{range,size}() helpers
Convert open-coded resource size calculations to use
resource_set_{range,size}() helpers.
While at it, use SZ_* for size parameter where appropriate which makes the
intent of code more obvious.
Also, cast sizes to resource_size_t, not u64.
Link: https://lore.kernel.org/r/20240614100606.15830-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Todd Kjos
|
2985b1844f |
PCI: Fix reset_method_store() memory leak
In reset_method_store(), a string is allocated via kstrndup() and assigned
to the local "options". options is then used in with strsep() to find
spaces:
while ((name = strsep(&options, " ")) != NULL) {
If there are no remaining spaces, then options is set to NULL by strsep(),
so the subsequent kfree(options) doesn't free the memory allocated via
kstrndup().
Fix by using a separate tmp_options to iterate with strsep() so options is
preserved.
Link: https://lore.kernel.org/r/20241001231147.3583649-1-tkjos@google.com
Fixes:
|
|
Wei Huang
|
f69767a1ad |
PCI: Add TLP Processing Hints (TPH) support
Add support for PCIe TLP Processing Hints (TPH) support (see PCIe r6.2, sec 6.17). Add TPH register definitions in pci_regs.h, including the TPH Requester capability register, TPH Requester control register, TPH Completer capability, and the ST fields of MSI-X entry. Introduce pcie_enable_tph() and pcie_disable_tph(), enabling drivers to toggle TPH support and configure specific ST mode as needed. Also add a new kernel parameter, "pci=notph", allowing users to disable TPH support across the entire system. Link: https://lore.kernel.org/r/20241002165954.128085-2-wei.huang2@amd.com Co-developed-by: Jing Liu <jing2.liu@intel.com> Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Co-developed-by: Eric Van Tassell <Eric.VanTassell@amd.com> Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Eric Van Tassell <Eric.VanTassell@amd.com> Signed-off-by: Wei Huang <wei.huang2@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> |
|
|
Linus Torvalds
|
3a37872316 |
pci-v6.12-changes
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
|
Bjorn Helgaas
|
45e981b86d |
Merge branch 'pci/controller/qcom'
- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add Manivannan Sadhasivam as maintainer of qcom endpoint driver (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan Sadhasivam) - Cache maximum link speed value in dw_pcie.max_link_speed for use by vendor drivers (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) * pci/controller/qcom: PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names PCI: endpoint: Assign PCI domain number for endpoint controllers dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property dt-bindings: PCI: pci-ep: Update Maintainers PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event PCI: qcom-ep: Drop the redundant masking of global IRQ events |
|
|
Bjorn Helgaas
|
f2a3ce1597 |
Merge branch 'pci/reset'
- Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) * pci/reset: PCI: Wait for Link before restoring Downstream Buses |