AP interfaces fundamentally cannot leave the channel, so multi-
channel operation with them isn't really possible. We shouldn't
advertise support for such, at least not as long as we don't
have full multi-radio support. Thus, remove the AP bit from the
interface combinations for two channels and add another set for
just one channel that has it.
Also, to avoid duplicating everything even more, unify the NAN
and non-NAN cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.3213638262ef.I2a0031b37623d7763fd0c5405477ea7206a3e923@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If non-BSS and remain-on-channel (ROC) blocking were to occur
simultaneously, they'd step on each other's toes, unblocking
when not yet supported. Disentangle these bits, and ROC doesn't
need to use the non_bss_link() function then.
Fixes: a1efeb8230 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.
Fixes: 67ac248e4d ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have two
conflicts this time:
CONFLICT (content): Merge conflict in net/mac80211/cfg.c
CONFLICT (content): Merge conflict in drivers/net/wireless/microchip/wilc1000/netdev.c
Here are Stephen's resolutions for them:
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au/https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au/
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* Enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZi07URHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu3/QgAo7jyKgvpwMaNIVRLyfYCo0r3Q9wb7QPd
QeRNsftYxlWpPTJ4+Y95aZupy91Ay+RaEQXbbtl7PMIiyQrs7wb4V4Iqzedkws3t
DZsR5BitH+1BIGY0Omo0fiSB5HlWEwZGUj6inqlgKHpBtdIVTANSMjuwkdoMAV5y
ZU57axIGToySvDbRlhJQW833Nnh4KnaseA+TtyfXSaBVerzbshkjBr0d9pMBMiH9
irMQW5CW+7fbxp3OCNsKxX4eG6MFGmm/uP1hFmeYQi2qzUE4SddHMeV4I6oNKOrH
vFB+ZVmYvOjJUYsNhlCUe6Vy+EKwvmfiDWwE1egelEkgozCixJXAAQ==
=QT4C
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When entering RF-kill, mac80211 tears down BA sessions, but
due to RF-kill the commands aren't sent to the device. As a
result, there can be frames pending on the reorder buffer or
perhaps even received while doing so, leading to warnings.
Avoid the warnings by doing the BA session teardown normally
even in RF-kill, which also requires queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If pre-recovery mac80211 tried to disable a link but this disablement
failed, then there might be a mismatch between mac80211 assuming the
link has been disabled and the driver still having the data around.
During recover itself, that is not a problem, but should the link be
activated again at a later point, iwlwifi will refuse the activation as
it detects the inconsistent state.
Solve this corner-case by iterating the station in the restart cleanup
handler.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz BSS SP client shall respect TX power limits advertised
by the AP in TPE elements, send the data to the firmware using
the AP_TX_POWER_CONSTRAINTS_CMD command, so do that.
Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While doing a passive scan, the firmware will report per-channel survey
information. This information is primarily useful for hostapd when doing
an ACS (Automatic Channel Selection). Collect this information and add
it to the result set when getting the survey information.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The move of the scan complete notification handling to the wiphy worker
introduced a race between scan complete notification and scan abort:
- The wiphy lock is held, e.g., for rfkill handling etc.
- Scan complete notification is received but not handled yet.
- Scan abort is triggered, and scan abort is sent to the FW. Once the
scan abort command is sent successfully, the flow synchronously waits
for the scan complete notification. However, as the scan complete
notification was already received but not processed yet, this hangs for
a second and continues leaving the scan status in an inconsistent
state.
- Once scan complete handling is started (when the wiphy lock is not held)
since the scan status is not an inconsistent state, a warning is issued
and the scan complete notification is not handled.
To fix this issue, switch back the scan complete notification to be
asynchronously handling, and only move the link selection logic to
a worker (which was the original reason for the move to use wiphy lock).
While at it, refactor some prints to improve debug data.
Fixes: 07bf5297d3 ("wifi: iwlwifi: mvm: Implement new link selection algorithm")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After restart, we might want to end up with the same config
as before, even for multi-link/EMLSR. Therefore, don't reset
the stored link selection result in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's an active link in a non-station vif, the station vif is
not allowed to enter EMLSR
Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule
an exit from EMLSR worker, but the worker cannot run before the
activation of the non-BSS link, as ieee80211_remain_on_channel already
holds the wiphy mutex.
Handle that by explicitly calling ieee80211_set_active_links()
to leave EMLSR, and then doing iwl_mvm_block_esr() only for
consistency and to avoid re-entering it before ready.
Note that a call to ieee80211_set_active_links requires to release the
mvm mutex, but that's ok since we still hold the wiphy lock. The only
thing that might race here is the ESR_MODE_NOTIF, so this changes its
handler to run under the wiphy lock.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If CSA is happening, then exit EMLSR to keep the better link,
which is the primary link unless that's doing the CSA with
quiet. This is done because we can't transmit the OMN frame
on a quiet link, but want to exit EMLSR during CSA for better
beacon reception, so we can follow the switch accurately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adjust EMLSR activation to account for traffic levels. By
tracking the number of RX/TX MPDUs, EMLSR will be activated only when
traffic volume meets the required threshold.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the reason for exiting EMLSR was a blocking reason, wait for the
corresponding unblocking event:
- if there is an ongoing scan - do nothing. Link selection will be
triggered at the end of it.
- If more than 30 seconds passed since the exit, trigger MLO scan, which
will trigger link selection
- If less then 30 seconds passed since exit, reuse the latest link
selection result
If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*),
schedule MLO scan in 30 seconds.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the
vif from using EMLSR with a different link pair. In addition, storing it
in mvmvif:disable_esr_reason requires extracting the BT Coex bit before
checking if EMLSR is blocked or not for a specific vif.
Therefore, change the BT Coex bit to be an exit reason and not a
blocker. On link selection, EMLSR mode will be re-calculated for the 2.4
GHz link instead of checking that bit.
While at it, move the relevant function declarations to the EMLSR
functions area in mvm.h
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of
one of the links got too low.
For that request the FW to send statistics every 5 seconds when in EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Address scenarios where repeated entry and exit from EMLSR occur, such as
encountering missed beacons on a specific link,
while still discovering that link during a scan.
To mitigate this, introduce the EMLSR prevention mechanism, which operates
as follows:
- On each exit from EMLSR event, record the timestamp and the exit
reason.
- If two consecutive exits happen for the same reason within a
400-second window, enforce a 300-second EMLSR prevention.
- If a third exit for the same reason occurs within 400 seconds from the
second exit, enforce an extended EMLSR prevention of 600 seconds.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's dangerous to re-initialize works repeatedly, especially
delayed ones that have an associated timer, and even more so
if they're not necessarily canceled inbetween. This can be
the case for these workers here during FW restart scenarios,
so make sure to initialize it only once.
While at it, also ensure it is cancelled correctly.
Fixes: f678061402 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replaces the current logic with a new algorithm based on the link
grading introduced in a previous patch.
The new selection algorithm will be invoked upon successful scan to ensure
it has the necessary updated data it needs.
This update delegates the selection logic as the primary link
determiner in EMLSR mode, storing it in mvmvif to avoid repeated
calculations, as the result may vary.
Additionally, includes tests for iwl_mvm_valid_link_pair to validate
link pairs for EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function iwl_mvm_can_enter_esr() is (among others) calculating
if EMLSR mode is disabled due to BT coex by calling
iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in
mvmvif::esr_disable_reason.
But there is no need to calculate this every time iwl_mvm_can_enter_esr
is called. Fix this by calculating it once after authorization,
and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clearly, I put this flag into the wrong place: devices using the
code in mac80211.c only do not support EHT, so this isn't even
relevant. Fix this by moving the code to the right function.
Fixes: 32a5690e9a ("wifi: iwlwifi: mvm: support wider-bandwidth OFDMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.0d5fb0e971e4.I3b67c5e0ddcbe6e58143ec0bc4e40dd6dba4f863@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart only one link will be active initially and other links
are only activated again later on. With only a single link EMLSR cannot
be enabled and having it marked enabled confuses the internal state.
Mark EMLSR as disabled in the cleanup iterator, it can be reenabled
later one once this is possible.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.71eb622d6ce3.Ic4d50695b9bb332190dc712473096083aa96074b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new scan type that can be used for internal MLO purposes, i.e.,
in case updated BSS information is required. Currently only passive
scanning is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.5ce3e756cf8f.I4a41065f6b3a6ec6c6e44e83bc97c277ff7c599e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has handled quiet in CSA for a long time now, but
it didn't really matter much. However, now with quiet CSA on a
perhaps secondary link, we don't want mac80211 to stop queues,
we can continue using a link that's not requiring quiet. Set
the feature flag for MLO-capable devices indicating that we'll
handle the quiet entirely in the driver/device.
However, the firmware doesn't handle quiet in AP mode since we
don't really expect to really be needing that (without radar
detection), but - even for testing - make that work properly
by simply not pulling from TXQs in this scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.fa75403b5eaa.Ie3ff02215f810fcfefd6a22c481567f94f61c0c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If, for any reason, we're going to attempt to flush the queues
while quiet CSA is happening, this cannot succeed. This could
be the case if for example mac80211 were to flush after TXing
e.g. a deauth frame due to disconnecting during the CSA.
In this case, drop the frames instead, the firmware won't let
us do any transmissions and may also become unhappy if we're
not going to disconnect quickly enough.
Currently this doesn't happen as mac80211 stops queues, but
we'll want to let mac80211 know not to stop queues for proper
multi-link support during CSA, so we need to handle this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.d5d629f32ea8.I86d9b849d92273542bfc2d9c671b66179e7ebb72@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the non MLD firmware flows, although the deflink is used, the mapping
of link ID to BSS configuration was missing, which causes flows that need
this mapping to crash.
Fix this by adding the link ID to BSS configuration mapping to non MLD
flows as well.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.0b5c361e8f0c.Ib11f41815d2efa5d1ec57f855de4c8563142987b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLO ended up not really fully stable yet, we want to make
sure it works well with the ecosystem before enabling it.
Thus, remove the flag, but set WIPHY_FLAG_DISABLE_WEXT so
we don't get wireless extensions back until we enable MLO
for this hardware.
Cc: stable@vger.kernel.org
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240314110951.d6ad146df98d.I47127e4fdbdef89e4ccf7483641570ee7871d4e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support wider-bandwidth OFDMA we need to configure the
PHY context in the firmware, which will in turn configure
the DSP accordingly. Pass the relevant information down.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.ca666ede5dd6.I357972823d20e9045e2c97dbb7ac24fe9f5a6e41@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz STA supports different power types as LPI, SP, VLP.
and this information is provided by regulatory info.
Add support in driver to parse the power type capability in
regulatory info from FW and set it to the channel flags.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.9c6a4acabdb3.I501de5c0d86b9702bf61158a2e91c954a1da9a2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags argument to enable/disable beacon filtering functions
is unused and always zero, so just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CT kill should stop doing a lot of TX etc. to cool down the
NIC, but we don't stop all commands from going to the NIC,
and as such we shouldn't abort queue sync, since it can get
confused if we do, warning that we do it twice at the same
time etc. Only stop it when we'd also not send it in the
first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
define the timeout on RX queues notification as a macro so it will be
clearer.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's a bit tricky to understand what's going on here, add
more data to the warning messages to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise support for protected ranging negotiation if the firmware
supports it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206135637.9bb7e13ad18c.I578af1c9836e91069ce318b265bd221f42955992@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code here is the pre-MLD API, but of course older FW
that doesn't support MLD APIs cannot support EHT. Remove
some code that shouldn't be there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.bde5a9d87759.I4c69dd94416f92b0f1f53dd57dafecbec643600d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station.
Cc: stable@vger.kernel.org
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the following patch, iwl_mvm_roc_duration_and_delay and
iwl_mvm_roc_add_cmd will be called also from time-event.c.
Move then there (where they more belong) and make then
public.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.3edafc4d59aa.Ic68e90758bcad9ae00e0aa602101842dac60e1a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the check for using a chanctx's def vs. min_def,
to have the same in both places and reuse it later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.6fcde4051adf.I343934874612d21727ed167accaa967958b2c25b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware has the necessary support, enable SPP A-MSDUs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.15e4570e471f.I87cf284d3b19bb9f5558f0f33afaace6d6492acb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ADD_STA resets the link quality data inside the firmware. This is not
supposed to happen and has been fixed for newer devices. For older
devices (AX201 and down), this makes us send frames with rates that are
not in the TLC table.
Fixes: 5a86dcb4a9 ("wifi: iwlwifi: mvm: update station's MFP flag after association")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.1deca7eaff14.I597abd7aab36fdab4aa8311a48c98a3d5bd433ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for handling TID to link mapping negotiation
request and decide whether to accept it or not.
Accept the request if all TIDs are mapped to the same link set,
otherwise reject it.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.aab9819c378d.Icf6b79a362763e2e8b85959471f303b586617242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connecting to an AP, we currently initialize the rate
control only after associating. Since we now use firmware
to assign rates to auth/assoc frames rather than using the
data in the station and the firmware doesn't know, they're
transmitted using low mandatory rates. However, if the AP
advertised only higher supported rates we want to use them
to be nicer (it still must receive mandatory rates though),
so send the information to the firmware earlier to have it
know about it and be able to use it.
Fixes: 499d027904 ("wifi: iwlwifi: Use FW rate for non-data frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.ed7ab1c859c2.I4b4d4fc3905c8d8470fc0fee4648f25c950c9bb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function to add an interface may be called without a previous
removal if the HW is being reconfigured. As such, only add the symlink
if the hardware is not being reconfigured due to a HW_RESTART.
Fixes: c36235acb3 ("wifi: iwlwifi: mvm: rework debugfs handling")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wiphy_work infra ensures that the entire worker will run
with the wiphy mutex. It is useful to have RX handlers
running as a wiphy_work, when we don't want the handler to
run in parallel with mac80211 work (to avoid races).
For example - BT notification can disable eSR starting from the next
patch.
In ieee80211_set_active_links we first check that eSR is
allowed, (drv_can_activate_links) and then activate it.
If the BT notif was received after drv_can_activate_links
(which returned true), and before the activation - eSR will be
activated when it shouldn't.
If BT notif is handled with the wiphy mutex, it can't run in
parallel to ieee80211_set_active_links, which also holds that
mutex.
Add the necessary infrastructure here, for use in the next commit.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240123200528.ce83d16cdec8.I35ef53fa23f58b9ec17924099238b61deafcecd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's either the pldr_sync case, in which case we didn't want
or do the retry loops anyway, or things will just continue to
fail. Remove the retry loop that was added in a previous attempt
to address the issue that was later (though still a bit broken)
addressed by the pldr_sync case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.f80a88a18799.I48f21eda090f4cc675f40e99eef69a986d21b500@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ENOTSUPP isn't a standard error code, don't use it. Replace with
EOPNOTSUPP instead.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now, this isn't allowed. The API to mac80211 isn't great
for this, but we need to change the API to move puncturing
into the chanctx/chandef, and will do it better then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new firmware API uses a new command and notification,
the command configures in which statistics types driver is
interested and the notification is sent periodically.
An additional change in the API is that most of the statistics
data is accumulated and reported by the firmware per MLO link.
Implement new command and notification handlers and adjust to
per-link statistics.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.8cc7df0ebff2.If1dcb57145841c5b3c68ed112bbfcd0201f7acc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to get regulatory domain, driver sends MCC_UPDATE_CMD to the
FW. One of the parameters in the response is the status which can tell
if the regdomain has changed or not.
When iwl_mvm_init_mcc() is called during iwl_op_mode_mvm_start(), then
sband is still NULL and channel parameters (i.e. chan->flags) cannot be
initialized. When, further in the flow, iwl_mvm_update_mcc() is called
during iwl_mvm_up(), it first checks if the regdomain has changed and
then skips the update if it remains the same. But, since channel
parameters weren't initialized yet, the update should be forced in this
codepath. Fix that by adding a corresponding parameter to
iwl_mvm_init_fw_regd().
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.78b2c5b891b0.Iac49d52e0bfc0317372015607c63ea9276bbb188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Multi rx queue allows to spread the load of the Rx streams on different
CPUs. 9000 series required complex synchronization mechanisms from the
driver side since the hardware / firmware is not able to provide
information about duplicate packets and timeouts inside the reordering
buffer.
Users have complained that for newer devices, all those synchronization
mechanisms have caused spurious packet drops. Those packet drops
disappeared if we simplify the code, but unfortunately, we can't have
RSS enabled on 9000 series without this complex code.
Remove support for RSS on 9000 so that we can make the code much simpler
for newer devices and fix the bugs for them.
The down side of this patch is a that all the Rx path will be routed to
a single CPU, but this has never been an issue, the modern CPUs are just
fast enough to cope with all the traffic.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.2917eb8b7af9.Iddd7dcf335387ba46fcbbb6067ef4ff9cd3755a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In new firmware, we don't need this any more and it won't
be called any more by mac80211, since powersave handling
is all done by firmware. Remove it from the MLD ops.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.1a1ded96ffc2.Ie49d3004acdd6299fb84346c76b2b2b2f195196b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As session protection API is moving to be per link instead of per mac,
move the time events to be per link too.
Since there is only one concurrent time event per mac, it feels
unnecessary to have the time_event as a member of iwl_mvm_link_info.
(That way we will have to iterate over all links each time we want to
clear a time event, and also we will need mac80211 to tell us the link
id when mgd_tx_complete() is called.)
So leave this as a member of iwl_mvm_vif, but add the link id to the
time_event structure.
The link id in time_event will only be maintained and used for:
1. When SESSION_PROTECTION_CMD is supported (before it, we don't have MLO)
2. For time_events of types SESSION_PROTECT_CONF_ASSOC,
SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, and
SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION
(not for aux roc/ Hot Spot time_events).
For P2P, non-MLO connections, and pre-MLD API, deflink id, meaning 0,
will be used
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.21496bcacb18.I79d037325b4fae4c12a22d9477e53fc9c537ad46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.
Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.
Fixes: a6cc6ccb1c ("wifi: iwlwifi: mvm: support new flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We seem to have an issue in case we had a BSS and a P2P device on
channel 1 and then, the P2P device gets an ROC on channel 6. We would
change the channel of the PHY context to channel 6 even if the BSS was
using that same PHY context.
Revamp that code and don't try to change a PHY context, it doesn't mean
much for the firmware anyway. Just remove it and allocate a new one.
This makes the logic easier to follow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.4bc8b90d7be0.I1232dca3fe007362ec0ae0cf1d96217f2544e0d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we want to add a phy_ctxt, we need to increase the ref.
Note that all the WARN_ONs are already in place:
* We check that we don't add a context with ref != 0
* We check that we don't modify a context with ref = 0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.c19c07746b26.I5b0cbe0760811631a320218a10b88870b5bf0897@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From its very first stages of development, iwlmvm added all the PHY
context immediately upon firmware boot. Then, all we needed to do is to
modify the contexts. This was fine if the addition of a PHY context that
we don't need is free. This was true until now. Newer devices will run
calibrations upon the addition of a PHY context.
Change the way we work with PHY context in iwlmvm. Fortunately, we
already have all the ref counting in place so that it is not very hard
to do.
Also, since we now remove the PHY context before the link is removed
(but after it has been de-activated of course), it'll confuse the
firmware if we put the late phy_id into the LINK command that removes
the link. Change this to put an invalid phy_id just like we do when we
add a link that has no PHY context yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
bss_info_changed() callback of mac80211 was originally in both
MLD and non-MLD API. Therefore, we extracted the common part
to a function which receives a callback structure with the
mode-specific (non-MLO\MLO) ops. Eventually, for MLO API,
bss_info_changed() callback was split into 2 callbacks:
link_info_changed() and vif_cfg_changed() so it is no longer in use
for MLO, only for non-MLO.
Remove the code that uses the mode-specific callback structure.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.b65fbcdb9295.I2a64a6f1178ee0466755d728addc77acbb2ed6f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.
Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add simple logic that would allow using EMLSR in case
there are multiple valid links:
- In case the connection establishment has just been
completed try to find a valid link pair for EMLSR
functionality where one of the links in the pair is
the current active link.
- In case the valid links changed after connection
was already established, try to find a valid link pair
for EMLSR functionality, in case the EMSLR is not active
yet.
If a valid link pair is found call mac80211 to asynchronously
set the new link pair, otherwise continue using the current active
links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 added a new callback to add a vif debugfs.
Implement it instead of adding the debugfs directly,
which will make it properly preserved over switching
the vif from non-MLD/MLD and back.
This requires some rework so that we still have the
symlink but trust mac80211 to add/remove the debugfs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.818810e242e6.I805a28f9fbef5c52a3a575d04e7a6a909ecf9078@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't really know easily if a BIGTK will be used, but
in case firmware supports BIGTK it also supports the very
easy IGTK use (nothing to do on the host), and requires
that we program both IGTK and BIGTK to be able to use the
BIGTK. Thus, change the condition here to set the keys in
firmware (both IGTK/BIGTK) if BIGTK is supported.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.425ebc1ce484.If485ec962636c23d463b678e7da86e11b6fa86c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The management frames protection flag is always set when the station
is not yet authorized. However, it was not cleared after association
even if the association did not use MFP. As a result, all public
action frames are not parsed by fw (which will cause FTM to fail,
for example). Update the station MFP flag after the station is
authorized.
Fixes: 4c8d5c8d07 ("wifi: iwlwifi: mvm: tell firmware about per-STA MFP enablement")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.2488cbd01bde.Ic0f08b7d3efcbdce27ec897f84d740fec8d169ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
set_antenna() is supported only when the device is not started in
mac80211 which translates to the firmware not being loaded in iwlwifi.
The tricky part is that iwlwifi populates the sband data during its boot
and doesn't touch this data afterwards, but if the antenna settings
forbid MIMO, we need to update the sband data.
Rework the nvm parsing code to allow to get an existing nvm_data and
modify the sband with additional constraints (tx / rx chains masks).
Suggested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.81d94d630c95.I9473da818cbeeb51b2f89dcc59b00019113e7f55@changeid
[add bugfix from Benjamin for iwl_mvm_get_valid_rx_ant()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware crashes in the de-activation / re-activation
of the link during CSA, we will not have a valid phy_ctxt
pointer in mvmvif. This is a legit case, but when mac80211
removes the station to cleanup our state during the
re-configuration, we need to make sure we clear ap_sta
otherwise we won't re-add the station after the firmware has
been restarted. Later on, we'd activate the link, try to send
a TLC command crash again on ASSERT 3508.
Fix this by properly cleaning up our state.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.2651e6f6a55a.I4cd50e88ee5c23c1c8dd5b157a800e4b4c96f236@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the channel bandwidth is greater or equal than 80MHz,
enable FILS DF transmittion, even if the control channel is non-PSC.
That's because that in 80MHz there must be a sub 20MHz PSC
channel, and since the FILS DF is duplicated on all sub 20MHz
channels, within the 80MHz (hence it will be sent on a PSC channel).
Also, if FILS DF Tx is enabled, always configure the firmware
with the actual channel bandwidth, even before there is a connected
client (rather than the minimum bandwidth e.g. 20MHz), since FILS
DF transmission on a PSC channel take presedent over power
consumption.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.83b9a76fc6c4.I6703111cc6befcd0e9cd9adf3cb127a648dbb7b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device initialized with ME active, this would indeed
work, since the NVM information would be obtained from ME.
However, in the much more likely case that ME isn't active
and the firmware takes actions requiring the sync, this was
not working correctly when the firmware is only run at init
to obtain NVM data, since mac80211 isn't even initialized.
Fix this by moving the 'pldr_sync' handling to a different
place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.45a94d480e56.Id9277f1df6a63ab0dfca0d0c0f448c759e1b8e73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some cases of restart crashing here have been reported,
while we figure out where this is going wrong, check
the link more carefully to avoid the crash.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.2b81f52ce18e.I8f3b1962013107e2d7491d817c3349359341c6ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's an alternative link to use while the CSA is in
progress, there's no need to disconnect since another link
is still usable during the switching time. Change the code
here to handle that accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.dd1b96a37e51.Idafdcbfcb36ca4c486f4221aef77643869331514@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the spec, CSA is defined roughly as follows:
- TBTT x: beacon with CSA, count=n (old channel)
- TBTT x+1: beacon with CSA, count=n-1 (old channel)
- TBTT x+n-1: beacon with CSA, count=1 (old channel)
"A Channel Switch Count field set to 1 indicates that the switch
occurs immediately before the next TBTT.
- TBTT x+n: beacon without CSA (new channel)
When we detect it, we currently schedule the CSA event to
be at 10 TUs before TBTT x+n-1, for a beacon interval, to
give us quiet time.
When this event *starts*, we currently notify mac80211
that the channel switch happened, which causes us to add
a session protection event to listen for the first beacon
(and enable TX etc. when that arrives).
We don't even ask for a notification when this event ends
so the code that handles that is effectively dead code.
The session protection duration is 3 beacon intervals,
scheduled at 10 TU before TBTT x+n-1. It will thus end
just before TBTT x+n+2.
Unfortunately, if the AP doesn't transmit or we miss just
the first two beacons on the new channel, then this will
cause us to disconnect. Or even just one, if the AP isn't
quite aligned with the TBTT after the switch.
However, listening to the _end_ of the time event isn't
what we want either, because we want all the new PHY and
other config that needs to come from mac80211 to start
early, so we have a head-start for the new channel, since
we're not going to use the old one anyway for this time.
So since we don't really have anything better to do at
this time, and this is relatively rare, just make the
session protection use 5x the beacon interval instead of
just 3x, so it's more likely we catch a beacon even if
the AP neglected to send it, or we just miss it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.a74176bac37c.I029a2ebcd1b5012327c728ffa1d33fac19cfdf4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the right link_id to ieee80211_chswitch_done.
Use the link_conf parameter passed to post_channel_switch() to get the
right ap_sta_id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.19470584fa51.Iad38b5369bededaa126b3eb3cff79f23d61bd783@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When hostapd starts up, it may start up with only one link
while the other is still scanning for overlapping BSSes. A
station might start to connect at this point, but we run
into this warning instead. Since there's no need to check
for _all_ links, restrict the check to just the affected
links that the STA will be using.
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.c3d5a006ec21.Ib4715381f598f4c18d67cd9598ebd5cdbe7d2b09@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg
Emmanuel Grumbach
Jakub Kicinski
Shaul Triebitz
Yedidya Benshimol
Benjamin Berg
Miri Korenblit
Ilan Peer
Mukesh Sisodiya
Avraham Stern
Ayala Beker
Andrei Otcheretianski
Anjaneyulu
Gregory Greenman