timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature. In addition, there was the usual
set of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ8iK9QAKCRAsFbugiYzL
e9P0AP0T2yU1fl3IRw+q9toRv126vJ7eSKWDZXDU1TppGn/FMQEAiI49Jnhp6WaO
e3nbULnMVF+oOoOTWMJrJ3f6aU5C4AE=
=yTAR
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250305' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
====================
ath.git patches for v6.15
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature. In addition, there was the usual
set of bug fixes and cleanups.
====================
Link: https://lore.kernel.org/linux-wireless/d01b1976-ebe8-48cd-8f49-32bfa00bed7e@oss.qualcomm.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for calibration-like properties without 'ath11k' prefix,
while still keeping everything backwards compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250225-b-wifi-qcom-calibration-variant-v1-5-3b2aa3f89c53@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Function ath11k_mac_setup_bcn_tmpl() retrieves tx_arvif only for
a sanity check and then calls ath11k_mac_setup_bcn_tmpl_mbssid()
or ath11k_mac_setup_bcn_tmpl_ema() both of which again retrieve
the same pointer. Instead store the pointer and pass it to the
latter two functions. Compile tested only.
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Create a new function ath11k_mac_get_tx_arvif() to retrieve 'arvif'
for the transmitted interface of the MBSSID set. This will help
modifying the same code path to reflect mac80211 data structure
changes to support MLO. This also fixes an issue in
ath11k_mac_update_vif_chan() where tx_arvif is not reset to NULL
inside for loop during each iteration. Compile tested only.
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210182718.408891-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
irq_set_affinity_hint() API is deprecated now, so let's use the recommended
equivalent irq_set_affinity_and_hint().
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250225053447.16824-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
If a shared IRQ is used by the driver due to platform limitation, then the
IRQ affinity hint is set right after the allocation of IRQ vectors in
ath11k_pci_alloc_msi(). This does no harm unless one of the functions
requesting the IRQ fails and attempt to free the IRQ. This results in the
below warning:
WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c
Call trace:
free_irq+0x278/0x29c
ath11k_pcic_free_irq+0x70/0x10c [ath11k]
ath11k_pci_probe+0x800/0x820 [ath11k_pci]
local_pci_probe+0x40/0xbc
The warning is due to not clearing the affinity hint before freeing the
IRQs.
So to fix this issue, clear the IRQ affinity hint before calling
ath11k_pcic_free_irq() in the error path. The affinity will be cleared once
again further down the error path due to code organization, but that does
no harm.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1
Cc: Baochen Qiang <quic_bqiang@quicinc.com>
Fixes: 39564b475a ("wifi: ath11k: fix boot failure with one MSI vector")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250225053447.16824-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In case of firmware assert snapshot of firmware memory is essential for
debugging. Add firmware coredump collection support for PCI bus.
Collect RDDM and firmware paging dumps from MHI and pack them in TLV
format and also pack various memory shared during QMI phase in separate
TLVs. Add necessary header and share the dumps to user space using dev
coredump framework. Coredump collection is controlled by
CONFIG_DEV_COREDUMP. Dump collected for a radio is 55 MB approximately.
The changeset is mostly copied from:
https://lore.kernel.org/all/20240325183414.4016663-1-quic_ssreeela@quicinc.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240813013028.2708111-2-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The value of 'ab->hw_params.fixed_mem_region' determines that
only one variable 'vaddr' or 'iaddr' is used in target_mem_chunk.
So use an anonymous union instead, easy to check whether the
memory is set or not.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240813013028.2708111-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241219110531.2096-3-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241219110531.2096-2-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
With previous patch "wifi: ath11k: move update channel list from update
reg worker to reg notifier", ath11k_reg_update_chan_list() will be
called during reg_process_self_managed_hint().
reg_process_self_managed_hint() will hold rtnl_lock all the time.
But ath11k_reg_update_chan_list() may increase the occupation time of
rtnl_lock, because when wait flag is set, wait_for_completion_timeout()
will be called during 11d/hw scan.
Should minimize the occupation time of rtnl_lock as much as possible
to avoid interfering with rest of the system. So move the update channel
list operation to a new worker, so that wait_for_completion_timeout()
won't be called and will not increase the occupation time of rtnl_lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Co-developed-by: Kang Yang <quic_kangyang@quicinc.com>
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250117061737.1921-3-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently when ath11k gets a new channel list, it will be processed
according to the following steps:
1. update new channel list to cfg80211 and queue reg_work.
2. cfg80211 handles new channel list during reg_work.
3. update cfg80211's handled channel list to firmware by
ath11k_reg_update_chan_list().
But ath11k will immediately execute step 3 after reg_work is just
queued. Since step 2 is asynchronous, cfg80211 may not have completed
handling the new channel list, which may leading to an out-of-bounds
write error:
BUG: KASAN: slab-out-of-bounds in ath11k_reg_update_chan_list
Call Trace:
ath11k_reg_update_chan_list+0xbfe/0xfe0 [ath11k]
kfree+0x109/0x3a0
ath11k_regd_update+0x1cf/0x350 [ath11k]
ath11k_regd_update_work+0x14/0x20 [ath11k]
process_one_work+0xe35/0x14c0
Should ensure step 2 is completely done before executing step 3. Thus
Wen raised patch[1]. When flag NL80211_REGDOM_SET_BY_DRIVER is set,
cfg80211 will notify ath11k after step 2 is done.
So enable the flag NL80211_REGDOM_SET_BY_DRIVER then cfg80211 will
notify ath11k after step 2 is done. At this time, there will be no
KASAN bug during the execution of the step 3.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/20230201065313.27203-1-quic_wgong@quicinc.com/
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: f45cb6b29c ("wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250117061737.1921-2-quic_kangyang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Current code in ath11k_mac_set_txbf_conf overrides nsts, which is
incorrect as it confuses nss and nsts. nss is Number of Spatial
Streams，nsts is Number of Space-Time Streams.
As mentioned in Fixes: 55b5ee3357, the nss used when acting as a
beamformee in VHT mode should be reported by the firmware and should not
be greater than the number of receiving antennas - 1. The num_rx_chains
related nss rather than nsts.
If STBC is enabled, nsts is greater than nss. About nss are mapped to
nsts, refer to IEEE Std 802.11-2020: 19.3.11.9.2 Space-time block coding
(STBC), Table 19-18—Constellation mapper output to spatial mapper input
for STBC.
Remove wrong overriding for nsts of VHT Beamformee STS Capability,
acting DL MU-MIMO in VHT mode is working properly.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: 55b5ee3357 ("wifi: ath11k: fix number of VHT beamformee spatial streams")
Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124075953.2282354-1-quic_yuzha@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The current code does not have the MU EDCA feature, so it cannot support
the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer
to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element",
"26.2.7 EDCA operation using MU EDCA parameters".
Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters
received from mac80211 into WMI WMM parameters，and send to the firmware
according to the different WMM type flags.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124061343.2263467-1-quic_yuzha@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Commit b205ce4c26 ("ath11k: support avg signal in station dump") added an
extra assignment of arsta->rssi_comb in ath11k_dp_rx_update_peer_stats()
when it added the average rssi support. So let's keep only one by removing
the legacy assignment so the two statements about rssi stay next to each
other. Compile tested only.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://patch.msgid.link/20250117181953.3375273-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
The firmware memory was allocated in ath11k_pci_probe() or
ath11k_ahb_probe(), but not freed in ath11k_xxx_remove() in case
ATH11K_FLAG_QMI_FAIL bit is set. So call ath11k_fw_destroy() to
free the memory.
Found while fixing the same problem in ath12k:
https://lore.kernel.org/linux-wireless/20240314012746.2729101-1-quic_miaoqing@quicinc.com
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04546-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123084948.1124357-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
User space application requires that the testmode interface
is exactly same between ath drivers. Move testmode_i.h file
in ath directory to ensure that all ath driver uses same testmode
interface instead of duplicating testmode_i.h for each ath drivers.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250119083657.1937557-2-quic_aarasahu@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the driver allocates cacheable DMA buffers for the rx_tid
structure using kzalloc() and dma_map_single(). These buffers are
long-lived and can persist for the lifetime of the peer, which is not
advisable. Instead of using kzalloc() and dma_map_single() for allocating
cacheable DMA buffers, utilize the dma_alloc_noncoherent() helper for the
allocation of long-lived cacheable DMA buffers, such as the peer's rx_tid.
Since dma_alloc_noncoherent() returns unaligned physical and virtual
addresses, align them internally before use within the driver. This
ensures proper allocation of non-coherent memory through the kernel
helper.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Link: https://patch.msgid.link/20250119164219.647059-3-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the driver allocates cacheable DMA buffers for rings like
HAL_REO_DST and HAL_WBM2SW_RELEASE. The buffers for HAL_WBM2SW_RELEASE
are large (1024 KiB), exceeding the SWIOTLB slot size of 256 KiB. This
leads to "swiotlb buffer is full" error messages on systems without an
IOMMU that use SWIOTLB, causing driver initialization failures. The driver
calls dma_map_single() with these large buffers obtained from kzalloc(),
resulting in ring initialization errors on systems without an IOMMU that
use SWIOTLB.
To address these issues, replace the flawed buffer allocation mechanism
with the appropriate DMA API. Specifically, use dma_alloc_noncoherent()
for cacheable DMA buffers, ensuring proper freeing of buffers with
dma_free_noncoherent().
Error log:
[ 10.194343] ath11k_pci 0000:04:00.0: swiotlb buffer is full (sz:1048583 bytes), total 32768 (slots), used 2529 (slots)
[ 10.194406] ath11k_pci 0000:04:00.0: failed to set up tcl_comp ring (0) :-12
[ 10.194781] ath11k_pci 0000:04:00.0: failed to init DP: -12
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Reported-by: Tim Harvey <tharvey@gateworks.com>
Closes: https://lore.kernel.org/all/20241210041133.GA17116@lst.de/
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Link: https://patch.msgid.link/20250119164219.647059-2-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-14-ddfefd7e9f2a@linux.microsoft.com
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZ1cfJQAKCRAsFbugiYzL
e6csAP4yj+pdNHX6asbohlpJlohsyroOTEiPLZ9sP5qQ17eRRgEA6ycwqwJ/d39b
AyL2rJlxRQOz8sPbGeDvSAf3HkKN4Q4=
=81tw
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20241209' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, although the feature is still
incomplete. Also in ath12k, there were other feature patches. In
ath11k, support was added for QCA6698AQ. And there was the usual set
of bug fixes and cleanups across most drivers, notable being the
addition of "noinline_for_stack" to some functions to avoid "stack
frame size" warnings when compiling with clang.
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When compiling the ath11k driver using clang with KASAN enabled, the
following warning is observed:
drivers/net/wireless/ath/ath11k/wow.c:672:5: warning: stack frame size (1336) exceeds limit (1024) in 'ath11k_wow_op_suspend' [-Wframe-larger-than]
This is similar to the issue found in ath12k/qmi.c that was discussed
in [1] and fixed with [2]. The issue is that clang inlining can
explode stack usage.
ath11k_wow_op_suspend() itself is a pretty lightweight function, but
it dispatches to several other functions which do the real work. One
path in particular is:
ath11k_wow_op_suspend()
ath11k_wow_set_wakeups()
ath11k_vif_wow_set_wakeups()
ath11k_wow_convert_8023_to_80211()
Of these, ath11k_wow_convert_8023_to_80211() has non-trivial stack
usage, so mark it as 'noinline_for_stack' to prevent it from being
inlined in ath11k_wow_op_suspend(), thereby eliminating the excessive
stack usage.
Compile tested only.
Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1]
Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com # [2]
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241119-ath11k-noinline-v1-3-4ec0a8aa30b2@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
When compiling the ath11k driver using clang with KASAN enabled, the
following warning is observed:
drivers/net/wireless/ath/ath11k/dp_rx.c:5244:5: warning: stack frame size (1304) exceeds limit (1024) in 'ath11k_dp_rx_process_mon_status' [-Wframe-larger-than]
This is similar to the issue found in ath12k/qmi.c that was discussed
in [1] and fixed with [2]. The issue is that clang inlining can
explode stack usage.
ath11k_dp_rx_process_mon_status() itself is a pretty
lightweight function, but it dispatches to several other functions
which do the real work:
ath11k_dp_rx_process_mon_status()
ath11k_dp_rx_reap_mon_status_ring()
ath11k_dp_rx_mon_dest_process()
ath11k_dp_rx_mon_mpdu_pop() *
ath11k_dp_rx_mon_deliver()
ath11k_dp_rx_mon_merg_msdus()
ath11k_dp_rx_deliver_msdu()
ath11k_dp_rx_update_peer_stats()
Of these, only ath11k_dp_rx_mon_mpdu_pop() has non-trivial stack
usage, so mark that function as 'noinline_for_stack' to prevent it
from being inlined in ath11k_dp_rx_process_mon_status(), thereby
eliminating the excessive stack usage.
Compile tested only.
Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1]
Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com # [2]
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241119-ath11k-noinline-v1-2-4ec0a8aa30b2@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
When compiling the ath11k driver using clang with KASAN enabled, the
following warning is observed:
drivers/net/wireless/ath/ath11k/qmi.c:3199:13: warning: stack frame size (1560) exceeds limit (1024) in 'ath11k_qmi_driver_event_work' [-Wframe-larger-than]
This is similar to the issue found in ath12k/qmi.c that was discussed
in [1] and fixed with [2]. The issue is that clang inlining can
explode stack usage.
Just as in ath12k, ath11k_qmi_driver_event_work() itself is a pretty
lightweight function, but it dispatches to several other functions
which do the real work:
ath11k_qmi_driver_event_work()
ath11k_qmi_event_server_arrive()
ath11k_qmi_fw_ind_register_send()
ath11k_qmi_host_cap_send() *
ath11k_qmi_event_load_bdf()
ath11k_qmi_event_mem_request()
ath11k_qmi_respond_fw_mem_request()
ath11k_qmi_event_load_bdf()
ath11k_qmi_wlanfw_m3_info_send() *
ath11k_qmi_m3_load()
ath11k_qmi_process_coldboot_calibration()
Of these, the two marked with * have non-trivial stack usage. Mark
those functions as 'noinline_for_stack' to prevent them from being
inlined in ath12k_qmi_driver_event_work(), thereby eliminating the
excessive stack usage.
Note that this approach is a bit more "surgical" than the ath12k
approach as only the two functions with the largest stack usage are
modified.
Compile tested only.
Link: https://msgid.link/bc214795-1c51-4cb7-922f-67d6ef98bff2@quicinc.com # [1]
Link: https://patch.msgid.link/20241028-ath12k_qmi_driver_event_work-v1-1-0d532eb593fa@quicinc.com # [2]
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241119-ath11k-noinline-v1-1-4ec0a8aa30b2@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
QCA6698AQ IP core is the same as WCN6855 hw2.1, they share the same
PCI device ID, the same major and minor version numbers, the same
register address, and same HAL descriptors, etc. The most significant
difference is that QCA6698AQ has different RF, IPA, thermal, etc.
Follow the approach done in commit 5dc9d1a55e ("wifi: ath11k: add
support for QCA2066"), enumerate the subversion number to identify the
specific card.
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241031000541.3331606-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241111070152.85140-4-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Remove initialized but otherwise unused 'rx_status_q' member of
'struct ath11k_mon_data' and adjust 'ath11k_dp_rx_pdev_mon_status_attach'
accordingly. Compile tested only.
Fixes: 67a9d399fc ("ath11k: enable RX PPDU stats in monitor co-exist mode")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241111070152.85140-3-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Remove unused 'ap_constraint_power' field of 'struct
ath11k_reg_tpc_power_info' and adjust related comment.
Compile tested only.
Fixes: 6f4e235be6 ("wifi: ath11k: add parse of transmit power envelope element")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241111070152.85140-2-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Remove set but otherwise unused 'tx_seq_no' member of 'struct ath11k_vif',
adjust 'ath11k_control_beaconing()' accordingly. This field was actually
unused since an initial commit of the driver. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241111070152.85140-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following error messages were encountered while parsing fragmented RX
packets for WCN6750/WCN6855:
ath11k 17a10040.wifi: invalid return buffer manager 4
This issue arose due to a hardcoded check for HAL_RX_BUF_RBM_SW3_BM
introduced in 'commit 71c748b5e0 ("ath11k: Fix unexpected return buffer
manager error for QCA6390")'
For WCN6750 and WCN6855, the return buffer manager ID should be
HAL_RX_BUF_RBM_SW1_BM. The incorrect conditional check caused fragmented
packets to be dropped, resulting in the above error log.
Fix this by adding a check for HAL_RX_BUF_RBM_SW1_BM.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00258-QCAMSLSWPL-1
Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: 71c748b5e0 ("ath11k: Fix unexpected return buffer manager error for QCA6390")
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241030114625.2416942-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/wireless to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
En passant several whitespace changes are done to make indentation
consistent in the struct initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
During rmmod, the ath11k host driver sends a QMI MODE OFF command
to firmware.
As part of this command, firmware initiates WLAN de-initialization
and accesses certain UMAC registers during this process.
Currently, on WCN6750 WLAN hardware, the system is in a sleep state when
firmware receives the QMI MODE OFF command.
This results in a firmware/hardware reset while accessing the UMAC hardware
registers during sleep state.
To avoid this, add logic to send WCN6750 hardware specific
WMI_PDEV_SUSPEND_AND_DISABLE_INTR command to firmware prior to sending
the QMI MODE OFF command.
This will cause firmware to cease all activities and put the device in
a powered-on state that prevents access to registers which have been
powered off.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241029083340.3010798-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove
ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZyJQgxQcampvaG5zb25A
a2VybmVsLm9yZwAKCRAsFbugiYzLe9sMAQCdkwZjywM92STd/hoiKrrBPWIhs3AM
9DzFnw5+hFy18wD/Z5WbgMCPoC7hBArRFO50Jf7pdP9LpLQg4S0FUL2cLgw=
=Hfxd
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20241030' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.13
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
ath10k
* Fix multiple stack frame size warnings
* Fix invalid VHT parameters in supported_vht_mcs_rate_nss* structs
* Avoid NULL pointer error during SDIO remove
ath5k
* Add support for Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix two instances of memory leaks, one in ath10k and one in ath11k.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZw/llxQcampvaG5zb25A
a2VybmVsLm9yZwAKCRAsFbugiYzLe+19AP4u/ME2TCahxmu2KxqmRmBwsLmIaYJk
msdN+ZdyV2oORgD+LKYyuIIQ+2iSLobvminy7HZPddYcenbh7QKBffHnkgE=
=LOOy
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20241016' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12-rc4
Fix two instances of memory leaks, one in ath10k and one in ath11k.
On full monitor HW the monitor destination rxdma ring does not have the
same descriptor format as in the "classical" mode. The full monitor
destination entries are of hal_sw_monitor_ring type and fetched using
ath11k_dp_full_mon_process_rx while the classical ones are of type
hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process.
Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same
size, the offset to useful info (such as sw_cookie, paddr, etc) are
different. Thus if ath11k_dp_rx_mon_dest_process gets called on full
monitor destination ring, invalid skb buffer id will be fetched from DMA
ring causing issues such as the following rcu_sched stall:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (1 GPs behind) idle=c67/0/0x7 softirq=45768/45769 fqs=1012
(t=2100 jiffies g=14817 q=8703)
Task dump for CPU 0:
task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x0000000a
Call trace:
dump_backtrace+0x0/0x160
show_stack+0x14/0x20
sched_show_task+0x158/0x184
dump_cpu_task+0x40/0x4c
rcu_dump_cpu_stacks+0xec/0x12c
rcu_sched_clock_irq+0x6c8/0x8a0
update_process_times+0x88/0xd0
tick_sched_timer+0x74/0x1e0
__hrtimer_run_queues+0x150/0x204
hrtimer_interrupt+0xe4/0x240
arch_timer_handler_phys+0x30/0x40
handle_percpu_devid_irq+0x80/0x130
handle_domain_irq+0x5c/0x90
gic_handle_irq+0x8c/0xb4
do_interrupt_handler+0x30/0x54
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
do_raw_spin_lock+0x60/0x100
_raw_spin_lock_bh+0x1c/0x2c
ath11k_dp_rx_mon_mpdu_pop.constprop.0+0x174/0x650
ath11k_dp_rx_process_mon_status+0x8b4/0xa80
ath11k_dp_rx_process_mon_rings+0x244/0x510
ath11k_dp_service_srng+0x190/0x300
ath11k_pcic_ext_grp_napi_poll+0x30/0xc0
__napi_poll+0x34/0x174
net_rx_action+0xf8/0x2a0
_stext+0x12c/0x2ac
irq_exit+0x94/0xc0
handle_domain_irq+0x60/0x90
gic_handle_irq+0x8c/0xb4
call_on_irq_stack+0x28/0x44
do_interrupt_handler+0x4c/0x54
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x14/0x20
do_idle+0xf0/0x130
cpu_startup_entry+0x24/0x50
rest_init+0xf8/0x104
arch_call_rest_init+0xc/0x14
start_kernel+0x56c/0x58c
__primary_switched+0xa0/0xa8
Thus ath11k_dp_rx_mon_dest_process(), which use classical destination
entry format, should no be called on full monitor capable HW.
Fixes: 67a9d399fc ("ath11k: enable RX PPDU stats in monitor co-exist mode")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Praneesh P <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20240924194119.15942-1-repk@triplefau.lt
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Currently, mem_ce and mem iomem addresses are used to calculate the
CE offset address. mem_ce is initialized with mem address, and for
targets where ce_remap is needed, mem_ce is remapped to a new address
space during AHB probe.
For targets such as WCN6750 in which CE address space is same as WCSS
address space (i.e. "ce_remap" hw_param is set to false), mem_ce and
mem iomem addresses are same. In the initial SRNG setup for such targets,
the CE offset address and hence CE register base addresses are
calculated correctly in ath11k_hal_srng_init() as both mem and mem_ce
are initialized with same iomem address.
Later, after the firmware download, mem is initialized with BAR address
received in qmi_wlanfw_device_info_resp_msg_v01 QMI message, while mem_ce
is not updated.
After initial setup success, during Subsystem Restart (SSR), as part
of reinitialization, ath11k_hal_srng_init() will be called again,
and CE offset address will be calculated incorrectly this time as mem_ce
address was not updated. Due to the incorrect CE offset address,
APPS accesses an invalid CE register address which leads to improper
behavior in firmware after SSR is triggered.
To fix the above issue, update mem_ce to mem iomem address in
ath11k_qmi_request_device_info() for targets which do not support
ce_remap feature.
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Fixes: b42b3678c9 ("wifi: ath11k: remap ce register space for IPQ5018")
Link: https://patch.msgid.link/20240927095825.22317-1-quic_bpothuno@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
On SC7280 platforms which are running with TrustZone, it is not
necessary to manually map the memory regions used by the wifi hardware.
However, ath11k will currently fail to load unless both memory regions
are specified.
This breaks wifi on the rb3gen2 which only specifies the firmware memory
region and does not use the CE region.
Adjust the order of operations in ath11k_ahb_fw_resources_init() to
check for the wifi-firmware subnode before attempting to parse the
memory regions.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240904095815.1572186-2-caleb.connolly@linaro.org
Fix the following W=1 kernel build warning:
drivers/net/wireless/ath/ath11k/wow.c: In function ‘ath11k_vif_wow_set_wakeups’:
drivers/net/wireless/ath/ath11k/wow.c:461:1: warning: the frame size of 1352 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Remove the nonessential variable 'struct cfg80211_pkt_pattern
old_pattern' by relocating bitmask to bytemask conversion into
ath11k_wow_convert_8023_to_80211().
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240829075253.657667-1-quic_miaoqing@quicinc.com
WCN6750 firmware sends the log messages via WMI_DIAG_EVENTID only
when the host driver enables the same via QMI_WLANFW_WLAN_INI_REQ_V01
QMI message. This is further controlled via fw_wmi_diag_event.
Hence set this flag to true for the firmware to send the logs.
These logs are further collected in the user space through
the trace infrastructure.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00233-QCAMSLSWPLZ-1
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240828103043.2413-1-quic_bpothuno@quicinc.com
Currently struct ath11k_hal::srng_config pointer is not assigned
to NULL after freeing the memory in ath11k_hal_srng_deinit().
This could lead to double free issue in a scenario where
ath11k_hal_srng_deinit() is invoked back to back.
In the current code, although the chances are very low, the above
said scenario could happen when hardware recovery has failed and
then there is another FW assert where ath11k_hal_srng_deinit() is
invoked once again as part of recovery.
Fix this by assigning the struct ath11k_hal::srng_config pointer
to NULL after freeing the memory.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240826053326.8878-1-quic_bpothuno@quicinc.com
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbhVykRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtxgAf+J9om4LIpVd6hNT/hlkLf0jOlIkoOmbYT
16+g/dYRher0HJUMO/gcmubBO8dPmxopQEkR7XvkEqV72EAYcaDcios94cj0Uv1F
GbnixnO3VvCOE86PoOruM+WHT6ct9+ECWB6yODnF7Pps+WNrzhVTfmXm4j8vWnFH
KyHD/Hy4VsPDzj0EmzAC4ppkLMWfWypDbP4PBIOq9s+Oj6gJ671amWjmgFou+o9K
yOtNTBiBaVuBrkv5sJTbQIDkAvK2V9im2VTjrZej2a/3wm6+z3XM28tWbcsYJEyS
U2ZpHkS6QXlNaL4B8lDc6OP/c/xwM1CkzZsKe9p3T6iRemA0WLWaSg==
=gaJv
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is once again a fairly light pull request since ath12k is still
working on MLO-related changes, and the other drivers are mostly in
maintenance mode.
ath12k
* Fix a frame-larger-than warning seen with debug builds
* Fix flex-array-member-not-at-end warnings
ath11k
* Fix flex-array-member-not-at-end warnings
ath9k
* Fix a syzbot-reported issue on USB-based devices
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZt8M5BQcampvaG5zb25A
a2VybmVsLm9yZwAKCRAsFbugiYzLe19RAQCP44pjkW12HAECpBt4QDlZjW5bCR6Y
xin9u67eVOxUpQEAlP/gUDt/RKtzgXKcaeFIYm4gwkG+73vCp/UPnnhzyQ4=
=v+eD
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240909' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12
This is once again a fairly light pull request since ath12k is still
working on MLO-related changes, and the other drivers are mostly in
maintenance mode.
ath12k
* Fix a frame-larger-than warning seen with debug builds
* Fix flex-array-member-not-at-end warnings
ath11k
* Fix flex-array-member-not-at-end warnings
ath9k
* Fix a syzbot-reported issue on USB-based devices
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Thomas Gleixner
Johannes Berg
Krzysztof Kozlowski
Aloka Dixit
Manivannan Sadhasivam
Miaoqing Pan
Kang Yang
P Praneesh
Wen Gong
Yu Zhang(Yuriy)
Nicolas Escande
Linus Torvalds
Aaradhana Sahu
Easwar Hariharan
Kalle Valo
Rameshkumar Sundaram
Jeff Johnson
Dmitry Antipov
Jakub Kicinski
Balaji Pothunoori
Uwe Kleine-König
Remi Pommarel
Caleb Connolly
Manikanta Pubbisetty
Aditya Kumar Singh