In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.
Fixes: 50a487e771 ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.
Fixes: 8593fbc68b ("[MTD] Rework the out of band handling completely")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
If CONFIG_SPI_QPIC_SNAND=m, but CONFIG_MTD_NAND_QCOM=n:
ERROR: modpost: "qcom_nandc_unalloc" [drivers/spi/spi-qpic-snand.ko] undefined!
...
Fix this by dropping the explicit test for a built-in
CONFIG_SPI_QPIC_SNAND completely. Kbuild handles multiple and mixed
obj-y/obj-m rules for the same object file fine.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503280759.XhwLcV7m-lkp@intel.com/
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The atmel,dataflash binding has been converted to yaml and the physmap
one constrained. Some logs are improved, error path are getting reworked
a bit, few patches target the use of str_enabled_disabled().
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
* SPI NOR changes:
Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmfkMTQACgkQJWrqGEe9
VoS+Fgf/apT4C5115f4EolKAcato3QpJ+J1+S0Oy6yYSKQVwKNa4NkdBIeKXfQLc
rjNdsoE9RmibCKViX3D3rjlMnynbkIr4F3YHbgP4lz7y2TQUVA7Dy0sp2RX+9M3G
+a5u6lfUyGA/uzJPJUESaPpjLWLg5uTRcduD8hGVid9D+/KFYWNF0EsufobT8JmT
X/R+aVS58W0uqLEJtiaINsD6D3f8ukMZCNgsvuAUINSUNUrX61pVQZwQAZ4eCCNa
W+YaLdsMtrwRBdoRGXfrElHEvnufglYocUo+9h8EOVMQ84rfNH363Nu+1WxTVGDj
GLB5O9knQFy7DR0M4gYBAqqji41nTg==
=O/Ud
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmfkLyUACgkQJWrqGEe9
VoTj/gf/UFLUlbCTTLpiKItXTTywW7EEe/8ZvVoki/D6gzKrjfMnVzYjxpLqYCnc
Qps6RtHPX8Xkq2f7FMFCxu6t49PLFjvo8JIdEC7Q1Bxf3JLAPtQXIXZfl+frtNnc
MqctdU4BU9up8u1mCajjzSWtaCeU3YBwNtH9fPMS65b5dfg1vfXr7oA/NqfMg3ql
b4dMYHXzPHk6TP59q3yaTqkFf92yXzgEUjM651uoAIzafVSpVHyOZriDit8A/A3f
lBM0+SEhEPBBhMvWf0FgzlqWidmCE+LZPTypdkgVamvqYPh/KYFUs14UDmJd/M1t
TwXf+Q5c6mnGfmiVVvfM1icp0Lyr+Q==
=W0/k
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.15' into mtd/next
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmfZD0wACgkQS1VPR6WN
FOn+RAf+MnyaYWP20nCRoI8Amkemqxzp6oOLQWT6TPSRACyz90V2NGJqSolq2eUE
0pYpjAYmksFIqjTTgR90m0/KBh/+xuGzVQT2Ej2/UEuuE92Y5ZcXk6rUy0TSKAoS
ZE5MvHs7n9TYr1yXbh0Ow6ITkQR3IS1DgII90XuGBdRoZrWnfWCt/tYzacFJ8F37
2ENUKggLacldAIWguCVyamq8WOFFstxXg3d8oHNR/uUHs9qB3n/5vgnjLvKFIkqc
adejnSFR+LCwXOqpgbs9BuI3D+E70Hh+cvAcw1y+jPRHckJRYGCKiemZO2GFBkmi
iMDn/avxf7WEIYlgcwC0TpxnFRtqxA==
=6zFA
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.15' into mtd/next
SPI NOR adds support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
GCC compiler is not happy about NULL being supplied as printf() parameter:
drivers/mtd/mtdpart.c:693:34: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
Move the code after the parser test for NULL, and drop the ternary completely.
The user can deduct this since when it's not NULL two messages will be printed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Let's assume all these macros should not have a trailing comma, this way
the caller can use a more formal and usual C writing style, as reflected
in the Macronix driver.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The core driver is using of_property_read_bool() and relies on implicit
inclusion of <linux/of.h>, which comes from <linux/mtd/mtd.h>.
It is good practice to directly include all headers used, it avoids
implicit dependencies and spurious breakage if someone rearranges
headers and causes the implicit include to vanish.
Include the missing header.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250307-spi-nor-headers-cleanup-v1-1-c186a9511c1e@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
request_queue param is no longer used by blk_rq_map_sg and
__blk_rq_map_sg. Remove it.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250313035322.243239-1-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
swp and otp drivers use div_u64 and div64_u64 and rely on implicit
inclusion of <linux/math64.h>.
It is good practice to directly include all headers used, it avoids
implicit dependencies and spurious breakage if someone rearranges
headers and causes the implicit include to vanish.
Include the missing header.
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250223-snor-math64-v2-1-6f0313eea331@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Due to incorrect values in the 4-BAIT table for these two flash IDs,
it is necessary to add these two flash IDs with fixups.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20250211063028.382169-3-linchengming884@gmail.com
[ta: update commit subject]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Although certain Macronix NOR flash support the Quad Input Page Program
feature, the corresponding information in the 4-byte Address Instruction
Table of these flash is not properly filled. As a result, this feature
cannot be enabled as expected.
To address this issue, a post_sfdp fixups implementation is required to
correct the missing information.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20250211063028.382169-2-linchengming884@gmail.com
[ta: fix alignment to match open parenthesis]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Check and log del_mtd_device() failures. Print an error message
with pr_err() to prevent silent failures, but preserve the original
error code instead of propagating the secondary error since
del_mtd_device() is already in an error handling path.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add a check for devm_kcalloc() to ensure successful allocation.
Fixes: 78c08247b9 ("mtd: Support kmsg dumper based on pstore/blk")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace kcalloc() with devm_kcalloc() to prevent memory leaks in case of
errors.
Fixes: 78c08247b9 ("mtd: Support kmsg dumper based on pstore/blk")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add read retry support.
The Special Read for Data Recovery operation is enabled by
Set Feature function.
There are 5 modes for the user to recover the lost data.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://patch.msgid.link/20250224111414.2809669-3-quic_mdalam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 18bcb4aa54 ("mtd: spi-nor: sst: Factor out common write
operation to `sst_nor_write_data()`") introduced a bug where only one
byte of data is written, regardless of the number of bytes requested.
This causes the driver to use the incorrect write size for flashes using
the SST byte programming, and to spit out a warning.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ7NEiBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CTVnAP9krBOLfmlYO94PntaDscgjcehnxbuF
PEQby8/KlEnX0gEA5K73/0oQIZUnHQ98E6ntAtKoYD5zGNAJaYDpw+66CAU=
=5xea
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/fixes-for-6.14-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/fixes
Fix writes on SST flashes
Commit 18bcb4aa54 ("mtd: spi-nor: sst: Factor out common write
operation to `sst_nor_write_data()`") introduced a bug where only one
byte of data is written, regardless of the number of bytes requested.
This causes the driver to use the incorrect write size for flashes using
the SST byte programming, and to spit out a warning.
# -----BEGIN PGP SIGNATURE-----
#
# iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ7NEiBQccHJhdHl1c2hA
# a2VybmVsLm9yZwAKCRAR4drqP028CTVnAP9krBOLfmlYO94PntaDscgjcehnxbuF
# PEQby8/KlEnX0gEA5K73/0oQIZUnHQ98E6ntAtKoYD5zGNAJaYDpw+66CAU=
# =5xea
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Feb 2025 03:15:36 PM CET
# gpg: using EDDSA key 1395458DCD7184A376C59B2211E1DAEA3F4DBC09
# gpg: issuer "pratyush@kernel.org"
# gpg: Good signature from "Pratyush Yadav <p.yadav@ti.com>" [expired]
# gpg: aka "Pratyush Yadav <me@yadavpratyush.com>" [expired]
# gpg: issuer "pratyush@kernel.org" does not match any User ID
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 805C 3923 2FBE 108C 49E1 663C F650 3556 C11B 1CCD
# Subkey fingerprint: 1395 458D CD71 84A3 76C5 9B22 11E1 DAEA 3F4D BC09
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250211-spi-nor-guard-mutex-v1-1-05ed77a484d9@linaro.org
With some research in some obscure old QSDK, it was possible to find the
MASK of the last register there were still set with raw shift and
convert them to FIELD_PREP API.
This is only a cleanup and modernize the code a bit and doesn't make
any behaviour change.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Fix broken config in qcom_param_page_type_exec caused by copy-paste error
from commit 0c08080fd7 ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
In qcom_param_page_type_exec the value needs to be set to
nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused
the Qcom NANDC driver to malfunction on any device that makes use of it
(IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error:
[ 0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
[ 0.885909] nand: Micron NAND 256MiB 1,8V 8-bit
[ 0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB
[ 0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible
[ 0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel
[ 0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28
Restore original configuration fix the problem and makes the driver work
again.
Also restore the wrongly dropped cpu_to_le32 to correctly support BE
systems.
Cc: stable@vger.kernel.org
Fixes: 0c08080fd7 ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
Tested-by: Robert Marko <robimarko@gmail.com> # IPQ8074 and IPQ6018
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
dma_map_single is using physical/bus device (DMA) but dma_unmap_single
is using framework device(NAND controller), which is incorrect.
Fixed dma_unmap_single to use correct physical/bus device.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Remap the slave DMA I/O resources to enhance driver portability.
Using a physical address causes DMA translation failure when the
ARM SMMU is enabled.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace dma_request_channel() with dma_request_chan_by_mask() and use
helper functions to return proper error code instead of fixed -EBUSY.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Support for OTP area access on ESMT F50L1G41LB and F50D1G41LB chips.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Support for OTP area access on Micron MT29F2G01ABAGD chip.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The global functions spinand_otp_read() and spinand_otp_write() have
been introduced. Since most SPI-NAND flashes read/write OTP in the same
way, let's define global functions to avoid code duplication.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change the functions spinand_wait() and spinand_otp_page_size() from
static to global so that SPI NAND flash drivers don't duplicate it.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The MTD subsystem already supports accessing two OTP areas: user and
factory. User areas can be written by the user.
This patch provides the SPINAND_FACT_OTP_INFO and SPINAND_USER_OTP_INFO
macros to add parameters to spinand_info.
To implement OTP operations, the client (flash driver) is provided with
callbacks for user area:
.read(), .write(), .info(), .lock(), .erase();
and for factory area:
.read(), .info();
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change these functions from static to global so that to use them later
in OTP operations. Since reading OTP pages is no different from reading
pages from the main area.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add support for Winbond w25q01jv spi-nor chip.
This chip is internally made of two dies with linear addressing
capabilities to make it transparent to the user that two dies were
used. There is one drawback however, the read status operation is racy
as the status bit only gives the active die status and not the status of
the other die. For commands affecting the two dies, it means if another
command is sent too fast after the first die has returned a valid status
(deviation can be up to 200us), the chip will get corrupted/in an
unstable state.
This chip hence requires a better status register read. There are three
solutions here:
1- If we assume that the most common situation producing this problem is
status register writes, maybe we could change the "non-volatile"
status register write commands to become "volatile" status register
writes. In practice, what takes time is the write operation of the bits
themselves, and not the activation of the feature in the internal
circuitry. Enabling "volatile" status register writes would make the
writes nearly instant.
This approach, besides probably being the less impacting one, could
overlook other possible actions where both dies can be used at the same
time like a chip erase (or any erase over die boundaries in general).
2- Wait about 200us after getting a first status ready feedback. This
200us is about the maximum possible deviation between dies and would
cover all cases.
3- We iterate manually over all internal dies (which takes about 30us
per die) until all are ready. This approach will always be faster than
a blind delay which represents the maximum deviation, while also being
totally safe.
This third approach has been adopted. A flash-specific hook for the
status register read had to be implemented. Testing with the flash_speed
benchmark shown no difference with the existing performances (using the
regular status read core function). In practice there are difference in
the experimental results below, but they are part of the natural
deviation of the benchmark:
> Without the fixup
$ flash_speed /dev/mtd0 -c100 -d
eraseblock write speed is 442 KiB/s
eraseblock read speed is 1606 KiB/s
page write speed is 439 KiB/s
page read speed is 1520 KiB/s
2 page write speed is 441 KiB/s
2 page read speed is 1562 KiB/s
erase speed is 68 KiB/s
> With the fixup
$ flash_speed /dev/mtd0 -c100 -d
eraseblock write speed is 428 KiB/s
eraseblock read speed is 1626 KiB/s
page write speed is 426 KiB/s
page read speed is 1538 KiB/s
2 page write speed is 426 KiB/s
2 page read speed is 1574 KiB/s
erase speed is 66 KiB/s
However, the fixup, whatever which one we pick, must be applied on
multi-die chips, which hence must be properly flagged. The SFDP tables
implemented give a lot of information but the die details are part of an
optional table that is not implemented, hence we use a post parsing
fixup hook to set the params->n_dice value manually.
Link: https://www.winbond.com/resource-files/W25Q01JV%20SPI%20RevE%2003042024%20Plus.pdf
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250110-winbond-6-12-rc1-nor-volatile-bit-v3-1-735363f8cc7d@bootlin.com
-----BEGIN PGP SIGNATURE-----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=molg
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250131' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Fix a md-cluster regression introduced
- More sysfs race fixes
- Mark anything inside queue freezing as not being able to do IO for
memory allocations
- Fix for a regression introduced in loop in this merge window
- Fix for a regression in queue mapping setups introduced in this merge
window
- Fix for the block dio fops attempting an iov_iter revert upton
getting -EIOCBQUEUED on the read side. This one is going to stable as
well
* tag 'block-6.14-20250131' of git://git.kernel.dk/linux:
block: force noio scope in blk_mq_freeze_queue
block: fix nr_hw_queue update racing with disk addition/removal
block: get rid of request queue ->sysfs_dir_lock
loop: don't clear LO_FLAGS_PARTSCAN on LOOP_SET_STATUS{,64}
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
blk-mq: create correct map for fallback case
block: don't revert iter for -EIOCBQUEUED
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UBI:
- New interface to dump detailed erase counters
- Fixes around wear-leveling
UBIFS:
- Minor cleanups
- Fix for TNC dumping code
-----BEGIN PGP SIGNATURE-----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=bgVN
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- New interface to dump detailed erase counters
- Fixes around wear-leveling
UBIFS:
- Minor cleanups
- Fix for TNC dumping code"
* tag 'ubifs-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: ubi_get_ec_info: Fix compiling error 'cast specifies array type'
ubi: Implement ioctl for detailed erase counters
ubi: Expose interface for detailed erase counters
ubifs: skip dumping tnc tree when zroot is null
ubi: Revert "ubi: wl: Close down wear-leveling before nand is suspended"
ubifs: ubifs_dump_leb: remove return from end of void function
ubifs: dump_lpt_leb: remove return at end of void function
ubi: Add a check for ubi_num
There's been no major core change, and a bunch of driver related
improvements, amongst them the conversion to of_property_present() for
non-boolean properties, the addition of the support for Fujitsu
MB85RS128TY FRAM, a couple of improvements to the phram driver and the
usual load of misc changes.
* Raw NAND changes
A new controller driver, from Nuvoton, has been merged.
Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.
The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.
Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.
* SPI NAND changes
The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.
A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.
A Foresee device is also now supported.
* SPI NOR changes
Several flash entries have been added: Atmel AT25SF321, Spansion
S28HL256T and S28HL02GT.
Support for vcc-supply regulators and their DT bindings has been added.
The mx25u25635f entry has been dropped. The flash shares its ID with
mx25u25645g and both parts have an SFDP table. Removing their entry lets
them be driven by the generic SFDP-based driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmeTZO0ACgkQJWrqGEe9
VoSW1Qf/f96ejqjzTenBHYKOdSqm6aoML17po1xAUubIViub6LJQBHHrj69qvCvj
A4LrqQBPrnH1Escw79QEdwtTrefqra7CHnR1mMrhgF9SCS90762tt+MZ3+GDawBD
CU/Zw86+FrFyH1wRZg6RFT+FEGHBIExi7FqpypBLARdYrGt8ZpNDhJuPHizhvyco
Whd2WCoQEYxRsPQr+tcAuTtymCRSrNQ+IalVoTfm7p0QHS3OGfJWHHS92FPwTs/H
p2TvkEY/HD4pSelseJhG7nWA+CgfxyTg0pzISi2Ctr3qH76AHTDRZBm1xBKY/NiY
ZfC1YJ3cAjyN+VfL897DopAqmZK+3g==
=mk21
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- There's been no major core change, just a bunch of driver related
improvements.
Amongst them the conversion to of_property_present() for
non-boolean properties, the addition of the support for Fujitsu
MB85RS128TY FRAM, a couple of improvements to the phram driver and
the usual load of misc changes.
Raw NAND changes:
- A new controller driver, from Nuvoton, has been merged
- Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also
on the performance side. The binding has also been converted to
yaml, received a new OOB layout and now supports on-die ECC engines
- The Qualcomm controller driver has been deeply cleaned to extract
some parts of the code into a shared file with the Qualcomm SPI
memory controller
- Aside from these main changes, the Cadence binding has been
converted to yaml, the brcmnand controller driver has received a
small fix, otherwise some more minor changes have also made their
way in
SPI NAND changes:
- The SPI NAND subsystem has seen a great improvement, with the
advent of DTR operations (DDR operations, which may be extended to
the address cycles). The first vendor driver to benefit from these
improvements is the Winbond driver
- A new manufacturer driver is added SkyHigh, with a new constraint
for the core, it is impossible to disable the on-die ECC engine
- A Foresee device is also now supported
SPI NOR changes:
- Several flash entries have been added: Atmel AT25SF321, Spansion
S28HL256T and S28HL02GT
- Support for vcc-supply regulators and their DT bindings has been
added
- The mx25u25635f entry has been dropped. The flash shares its ID
with mx25u25645g and both parts have an SFDP table. Removing their
entry lets them be driven by the generic SFDP-based driver"
* tag 'mtd/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (47 commits)
mtd: spinand: skyhigh: Align with recent read from cache variant changes
mtd: spinand: winbond: Add support for DTR operations
mtd: spinand: winbond: Add comment about naming
mtd: spinand: winbond: Update the *JW chip definitions
mtd: spinand: Add support for read DTR operations
mtd: spinand: Enhance the logic when picking a variant
mtd: spinand: Add an optional frequency to read from cache macros
mtd: spinand: Create distinct fast and slow read from cache variants
mtd: hyperbus: Use of_property_present() for non-boolean properties
mtd: st_spi_fsm: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
mtd: rawnand: davinci: add ROM supported OOB layout
mtd: spi-nor: sysfs: constify 'struct bin_attribute'
mtd: spi-nor: spansion: Add support for S28HL02GT
mtd: spi-nor: spansion: Add support for S28HL256T
mtd: spi-nor: extend description of size member of struct flash_info
mtd: rawnand: davinci: Reduce polling interval in NAND_OP_WAITRDY_INSTR
mtd: rawnand: qcom: Fix build issue on x86 architecture
mtd: rawnand: qcom: use FIELD_PREP and GENMASK
mtd: nand: Add qpic_common API file
mtd: rawnand: qcom: Add qcom prefix to common api
...
Wentao Liang
Geert Uytterhoeven
Thomas Gleixner
Linus Torvalds
Miquel Raynal
Zhang Heng
Andy Shevchenko
Mark Brown
Tudor Ambarus
Anuj Gupta
Cheng Ming Lin
Edward Adam Davis
Jiasheng Jiang
Kamal Dasu
Md Sadre Alam
Ethan Carter Edwards
Niravkumar L Rabara
Amit Kumar Mahapatra
Christian Marangi
Martin Kurbanov
Christoph Hellwig