timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pcc: cleanup and refactoring of shmem and irq handling
qcom: add MSM8226 compatible
fsl,mu: add i.MX94 compatible
core: misc rejig of header includes
minor const fixes
mediatek: remove cl in struct cmdq_pkt
tegra: define dimensioning masks in SoC data
-----BEGIN PGP SIGNATURE-----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=Jii1
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- misc rejig of header includes
- minor const fixes
Misc:
- constify amba_id table
pcc:
- cleanup and refactoring of shmem and irq handling
qcom:
- add MSM8226 compatible
fsl,mu:
- add i.MX94 compatible
mediatek:
- remove cl in struct cmdq_pkt
tegra:
- define dimensioning masks in SoC data"
* tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (25 commits)
mailbox: Remove unneeded semicolon
mailbox: pcc: Refactor and simplify check_and_ack()
mailbox: pcc: Always map the shared memory communication address
mailbox: pcc: Refactor error handling in irq handler into separate function
mailbox: pcc: Use acpi_os_ioremap() instead of ioremap()
mailbox: pcc: Return early if no GAS register from pcc_mbox_cmd_complete_check
mailbox: pcc: Drop unnecessary endianness conversion of pcc_hdr.flags
mailbox: pcc: Always clear the platform ack interrupt first
mailbox: pcc: Fix the possible race in updation of chan_in_use flag
dt-bindings: mailbox: qcom: add compatible for MSM8226 SoC
dt-bindings: mailbox: fsl,mu: Add i.MX94 compatible
MAINTAINERS: add mailbox API's tree type and location
mailbox: remove unused header files
mailbox: explicitly include <linux/bits.h>
mailbox: sort headers alphabetically
mailbox: don't protect of_parse_phandle_with_args with con_mutex
mailbox: use error ret code of of_parse_phandle_with_args()
mailbox: arm_mhuv2: Constify amba_id table
mailbox: arm_mhu_db: Constify amba_id table
mailbox: arm_mhu: Constify amba_id table
...
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The existing check_and_ack() function had unnecessary complexity. The
logic could be streamlined to improve code readability and maintainability.
The command update register needs to be updated in order to acknowledge
the platform notification through type 4 channel. So it can be done
unconditionally. Currently it is complicated just to make use of
pcc_send_data() which also executes the same updation.
In order to simplify, let us just ring the doorbell directly from
check_and_ack() instead of calling into pcc_send_data(). While at it,
rename it into pcc_chan_check_and_ack() to maintain consistency in the
driver.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Currently the shared memory communication address was mapped by the
mailbox client drivers leading to all sorts of inconsistencies.
It also has resulted in the inconsistent attributes used while mapping
the shared memory regions.
In order to remove/eliminate any issues, let us ensures the shared
memory address is always mapped and unmapped when the PCC channels are
requested and release.
We need to map them as the ACPI PCCT associates these shared memory
with each channel subspace and may need use the status or the flags in
the headers of those shared memory communication address regions to
manage the transport/channel.
Note, until all the drivers using PCC start using this mapped shmem,
there might be double mapping of the shared memory address. This
shouldn't have any impact on existing mbox client drivers.
Since there are no users of pcc_chan_ioremap() and also it is mapped
by default, we can stop exporting it and merge the functionality into
pcc_mbox_request_channel().
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The existing error handling logic in pcc_mbox_irq() is intermixed with the
main flow of the function. The command complete check and the complete
complete update/acknowledgment are nicely factored into separate functions.
Moves error detection and clearing logic into a separate function called:
pcc_mbox_error_check_and_clear() by extracting error-handling logic from
pcc_mbox_irq().
This ensures error checking and clearing are handled separately and it
improves maintainability by keeping the IRQ handler focused on processing
events.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Platform Communication Channel (PCC) mailbox driver currently uses
ioremap() to map channel shared memory regions. However it is preferred
to use acpi_os_ioremap(), which is mapping function specific to EFI/ACPI
defined memory regions. It ensures that the correct memory attributes
are applied when mapping ACPI-provided regions.
While at it, also add checks for handling any errors with the mapping.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
pcc_mbox_cmd_complete_check() accesses pchan->cmd_complete.gas to check
command completion status. Even if GAS is NULL, pcc_chan_reg_read() gets
called which returns success doing nothing and then we return.
Add an early return if pchan->cmd_complete.gas == NULL before performing
any operations.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Sparse static checker flags a type mismatch warning related to
endianness conversion:
| warning: incorrect type in argument 1 (different base types)
| expected restricted __le32 const [usertype] *p
| got unsigned int *
This is because an explicit endianness conversion (le32_to_cpu()) was
applied unnecessarily to a pcc_hdr.flags field that is already in
little-endian format.
The PCC driver is only enabled on little-endian kernels due to its
dependency on ACPI and EFI, making the explicit conversion unnecessary.
The redundant conversion occurs in pcc_chan_check_and_ack() for the
pcc_hdr.flags field. Drop this unnecessary endianness conversion of
pcc_hdr.flags.
Also drop the redundant PCC_ACK_FLAG_MASK definition and use the
more appropriate and already defined PCC_CMD_COMPLETION_NOTIFY.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The PCC mailbox interrupt handler (pcc_mbox_irq()) currently checks
for command completion flags and any error status before clearing the
interrupt.
The below sequence highlights an issue in the handling of PCC mailbox
interrupts, specifically when dealing with doorbell notifications and
acknowledgment between the OSPM and the platform where type3 and type4
channels are sharing the interrupt.
-------------------------------------------------------------------------
| T | Platform Firmware | OSPM/Linux PCC driver |
|---|---------------------------------|---------------------------------|
| 1 | | Build message in shmem |
| 2 | | Ring Type3 chan doorbell |
| 3 | Receives the doorbell interrupt | |
| 4 | Process the message from OSPM | |
| 5 | Build response for the message | |
| 6 | Ring Platform ACK interrupt on | |
| | Type3 chan to OSPM | Received the interrupt |
| 7 | Build Notification in Type4 Chan| |
| 8 | | Start processing interrupt in |
| | | pcc_mbox_irq() handler |
| 9 | | Enter PCC handler for Type4 chan|
|10 | | Check command complete cleared |
|11 | | Read the notification |
|12 | | Clear Platform ACK interrupt |
| | No effect from the previous step yet as the Platform ACK |
| | interrupt has not yet been triggered for this channel |
|13 | Ring Platform ACK interrupt on | |
| | Type4 chan to OSPM | |
|14 | | Enter PCC handler for Type3 chan|
|15 | | Command complete is set. |
|16 | | Read the response. |
|17 | | Clear Platform ACK interrupt |
|18 | | Leave PCC handler for Type3 |
|19 | | Leave pcc_mbox_irq() handler |
|20 | | Re-enter pcc_mbox_irq() handler |
|21 | | Enter PCC handler for Type4 chan|
|22 | | Leave PCC handler for Type4 chan|
|23 | | Enter PCC handler for Type3 chan|
|24 | | Leave PCC handler for Type3 chan|
|25 | | Leave pcc_mbox_irq() handler |
-------------------------------------------------------------------------
The key issue occurs when OSPM tries to acknowledge platform ack
interrupt for a notification which is ready to be read and processed
but the interrupt itself is not yet triggered by the platform.
This ineffective acknowledgment leads to an issue later in time where
the interrupt remains pending as we exit the interrupt handler without
clearing the platform ack interrupt as there is no pending response or
notification. The interrupt acknowledgment order is incorrect.
To resolve this issue, the platform acknowledgment interrupt should
always be cleared before processing the interrupt for any notifications
or response.
Reported-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The function mbox_chan_received_data() calls the Rx callback of the
mailbox client driver. The callback might set chan_in_use flag from
pcc_send_data(). This flag's status determines whether the PCC channel
is in use.
However, there is a potential race condition where chan_in_use is
updated incorrectly due to concurrency between the interrupt handler
(pcc_mbox_irq()) and the command sender(pcc_send_data()).
The 'chan_in_use' flag of a channel is set to true after sending a
command. And the flag of the new command may be cleared erroneous by
the interrupt handler afer mbox_chan_received_data() returns,
As a result, the interrupt being level triggered can't be cleared in
pcc_mbox_irq() and it will be disabled after the number of handled times
exceeds the specified value. The error log is as follows:
| kunpeng_hccs HISI04B2:00: PCC command executed timeout!
| kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110
| irq 13: nobody cared (try booting with the "irqpoll" option)
| Call trace:
| dump_backtrace+0x0/0x210
| show_stack+0x1c/0x2c
| dump_stack+0xec/0x130
| __report_bad_irq+0x50/0x190
| note_interrupt+0x1e4/0x260
| handle_irq_event+0x144/0x17c
| handle_fasteoi_irq+0xd0/0x240
| __handle_domain_irq+0x80/0xf0
| gic_handle_irq+0x74/0x2d0
| el1_irq+0xbc/0x140
| mnt_clone_write+0x0/0x70
| file_update_time+0xcc/0x160
| fault_dirty_shared_page+0xe8/0x150
| do_shared_fault+0x80/0x1d0
| do_fault+0x118/0x1a4
| handle_pte_fault+0x154/0x230
| __handle_mm_fault+0x1ac/0x390
| handle_mm_fault+0xf0/0x250
| do_page_fault+0x184/0x454
| do_translation_fault+0xac/0xd4
| do_mem_abort+0x44/0xb4
| el0_da+0x40/0x74
| el0_sync_handler+0x60/0xb4
| el0_sync+0x168/0x180
| handlers:
| pcc_mbox_irq
| Disabling IRQ #13
To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before
the call to mbox_chan_received_data().
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
(sudeep.holla: Minor updates to the subject, commit message and comment)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There's nothing used from these header files, remove their inclusion.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Don't rely on those including the header file to already include the
needed <linux/bits.h>. Include it in the header file.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There are no concurrency problems if multiple consumers parse the
phandle, don't gratuiously protect the parsing with the mutex used
for the controllers list.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
In case of error, of_parse_phandle_with_args() returns -EINVAL when the
passed index is negative, or -ENOENT when the index is for an empty
phandle. The mailbox core overwrote the error return code with a less
precise -ENODEV. Use the error returned code from
of_parse_phandle_with_args().
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
set_destination() and clear_destination() are static functions not used
anywhere in the code:
pl320-ipc.c:48:20: error: unused function 'set_destination' [-Werror,-Wunused-function]
pl320-ipc.c:54:20: error: unused function 'clear_destination' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Tegra264 has updated HSP_INT_DIMENSIONING register as follows:
* nSI is now BIT17:BIT21.
* nDB is now BIT12:BIT16.
Currently, we are using a static macro HSP_nINT_MASK to get the values
from HSP_INT_DIMENSIONING register. This results in wrong values for nSI
for HSP instances that supports 16 shared interrupts.
Define dimensioning masks in soc data and use them to parse nSI, nDB,
nAS, nSS & nSM values.
Fixes: 602dbbacc3 ("mailbox: tegra: add support for Tegra264")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/b742f81b6acdaa604511834a06a8aac3e6e63ca3.1738746904.git.namcao@linutronix.de
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a99e72be-8490-4960-ad26-cbfef6af238f@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable,
so it should not be annotated with __percpu annotation.
Remove invalid __percpu annotation to fix several
zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces)
zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata
zynqmp-ipi-mailbox.c:920:15: got void *
zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces)
zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value
zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu *
...
and several
drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression
...
sparse warnings.
There were no changes in the resulting object file.
Cc: stable@vger.kernel.org
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16
flag bits for hardware interrupt generation and a shared register for
passing mailbox messages. When the controller is used by the
ACPM interface the shared register is ignored and the mailbox controller
acts as a doorbell. The controller just raises the interrupt to APM
after the ACPM interface has written the message to SRAM.
Add support for the Samsung Exynos mailbox controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
IPQ5424 mailbox do not have clock support and reuses msm8994_apcs_data.
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
For some SoCs, boot firmware is using the same IPCC instance used
by Linux and it has kept CLEAR_ON_RECV_RD set which basically means
interrupt pending registers are cleared when RECV_ID is read and the
register automatically updates to the next pending interrupt/client
status based on priority.
Clear the CLEAR_ON_RECV_RD if it is set from the boot firmware.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add a mailbox controller driver for the Microchip Inter-processor
Communication (IPC), which is used to send and receive data between
processors.
The driver uses the RISC-V Supervisor Binary Interface (SBI) to
communicate with software running in machine mode (M-mode) to access
the IPC hardware block.
Additional details on the Microchip vendor extension and the IPC
function IDs described in the driver can be found in the following
documentation:
https://github.com/linux4microchip/microchip-sbi-ecall-extension
This SBI interface in this driver is compatible with the Mi-V Inter-hart
Communication (IHC) IP.
Transmitting and receiving data through the mailbox framework is done
through struct mchp_ipc_msg.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Tegra RCE (Camera) driver expects the mailbox to be empty before
processing the IVC messages. On RT kernel, the threads processing the
IVC messages (which are invoked after `mbox_chan_received_data()` is
called) may be on a different CPU or running with a higher priority
than the HSP interrupt handler thread. This can cause it to act on the
message before the mailbox gets cleared in the HSP interrupt handler
resulting in a loss of IVC notification.
Fix this by clearing the mailbox data register before calling
`mbox_chan_received_data()`.
Fixes: 8f585d1403 ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops")
Fixes: 74c20dd0f8 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support")
Cc: stable@vger.kernel.org
Signed-off-by: Pekka Pessi <ppessi@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This code accidentally checks ->ctrl_base instead of ->mbox_base so the
error handling can never be triggered.
Fixes: a4123ffab9 ("mailbox: mpfs: support new, syscon based, devicetree configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The devm_ioremap() function doesn't return error pointers, it returns
NULL. Update the error checking to match.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0s3DA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykmgQCeIDU0GHWFuzEiZNmsO5bLN8AcoFQAn1rlOaHu
9lOOf7xVSCUBU0GgynI5
=SEtJ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted"
* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
serial: amba-pl011: fix build regression
dt-bindings: serial: Add a new compatible string for ums9632
serial: sprd: Add support for sc9632
tty/serial/altera_uart: unwrap error log string
tty/serial/altera_jtaguart: unwrap error log string
serial: amba-pl011: Fix RX stall when DMA is used
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
serial: 8250_fintek: Add support for F81216E
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
tty: atmel_serial: Fix typo retreives to retrieves
tty: atmel_serial: Use devm_platform_ioremap_resource()
serial: 8250: omap: Move pm_runtime_get_sync
tty: serial: samsung: Add Exynos8895 compatible
dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
serial: 8250_dw: Add Sophgo SG2044 quirk
dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
altera_jtaguart: Use dev_err() to report error attaching IRQ
altera_uart: Use dev_err() to report error attaching IRQ handler
...
Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.
If the flag is not set, still set command completion
bit after processing message.
In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/mailbox to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Make a few indentions consistent while touching these struct
initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Replace %i with %u in snprintf() because it is "unsigned int".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.
It doesn't affect things in practice because the data comes from the
device tree. The "protocol" and "windows" variables are going to be
zero. That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.
Still it's worth fixing this for future use cases.
Fixes: 5a6338cce9 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
As per zynqmp-ipi bindings, zynqmp IPI node can have multiple child nodes.
Current IPI setup function is set only for first child node. If IPI node
has multiple child nodes in the device-tree, then IPI setup fails for
child nodes other than first child node. In such case kernel will crash.
Fix this crash by registering IPI setup function for each available child
node.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This driver was tested using the drm/imagination GPU driver. It was able
to successfully power on the GPU, by passing a command through mailbox
from E910 core to E902 that's responsible for powering up the GPU. The
GPU driver was able to read the BVNC version from control registers,
which confirms it was successfully powered on.
[ 33.957467] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 33.966008] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6621747 OS)
[ 38.978542] powervr ffef400000.gpu: [drm] *ERROR* Firmware failed to
boot
Though the driver still fails to boot the firmware, the mailbox driver
works when used with the not-yet-upstreamed firmware AON driver. There
is ongoing work to get the BXM-4-64 supported with the drm/imagination
driver [1], though it's not completed yet.
This work is based on the driver from the vendor kernel [2].
Link: https://gitlab.freedesktop.org/imagination/linux-firmware/-/issues/2 [1]
Link: https://github.com/revyos/thead-kernel.git [2]
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc().
Fixes: aa1609f571 ("mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The TI message manager driver can be compiled without ARCH_KEYSTONE
nor ARCH_K3 enabled. Allow it to be built under COMPILE_TEST.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When OF support is disabled the of_device_id struct match table can be
conditionally compiled out, this helper allows the assignment to also be
turned into a NULL conditionally. When the of_device_id struct is not
conditionally defined based on OF then the table will be unused causing a
warning. The two options are to either set the table as _maybe_unused, or
to just remove this helper since the table will always be defined.
Do the latter here.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a0310 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The two previous bindings for this hardware were incorrect, as the
control/status and interrupt register regions should have been described
as syscons and dealt with via regmap in the driver. Add support for
accessing these registers using that method now, so that the hwmon
driver can be supported without using auxdev or hacks with io_remap().
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Nothing in kfifo.h directly needs dma-mapping.h, only two macros
use DMA_MAPPING_ERROR when actually instantiated. Drop the
dma-mapping.h include to reduce include bloat.
Add an explicity <linux/io.h> include to drivers/mailbox/omap-mailbox.c
as that file uses __raw_readl and __raw_writel through a complicated
include chain involving <linux/dma-mapping.h>
Fixes: d52b761e4b ("kfifo: add kfifo_dma_out_prepare_mapped()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241023055317.313234-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use of_property_match_string() instead of open-coding the search. With
this, of_get_property() can be removed as there is no need to check for
"mbox-names" presence first.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d7 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Due to clk only used in probe, not in suspend\resume, this pointer can
remove from sprd_mbox_priv to save a little memory.
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Thomas Gleixner
Linus Torvalds
Chen Ni
Sudeep Holla
Huisong Li
Tudor Ambarus
Krzysztof Kozlowski
Kartik Rajput
Nam Cao
Michal Wilczynski
Uros Bizjak
Gokul Sriram Palanisamy
Mukesh Ojha
Valentina Fernandez
Pekka Pessi
Dan Carpenter
Adam Young
Uwe Kleine-König
zhang jiao
Tanmay Shah
Yang Yingliang
Andrew Davis
Sibi Sankar
Sakari Ailus
Conor Dooley
Christoph Hellwig
Arnd Bergmann
Rob Herring (Arm)
Stefan Wahren
Huan Yang