struct rdma_cm_id has member "struct work_struct net_work"
that is reused for enqueuing cma_netevent_work_handler()s
onto cma_wq.
Below crash[1] can occur if more than one call to
cma_netevent_callback() occurs in quick succession,
which further enqueues cma_netevent_work_handler()s for the
same rdma_cm_id, overwriting any previously queued work-item(s)
that was just scheduled to run i.e. there is no guarantee
the queued work item may run between two successive calls
to cma_netevent_callback() and the 2nd INIT_WORK would overwrite
the 1st work item (for the same rdma_cm_id), despite grabbing
id_table_lock during enqueue.
Also drgn analysis [2] indicates the work item was likely overwritten.
Fix this by moving the INIT_WORK() to __rdma_create_id(),
so that it doesn't race with any existing queue_work() or
its worker thread.
[1] Trimmed crash stack:
=============================================
BUG: kernel NULL pointer dereference, address: 0000000000000008
kworker/u256:6 ... 6.12.0-0...
Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm)
RIP: 0010:process_one_work+0xba/0x31a
Call Trace:
worker_thread+0x266/0x3a0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
=============================================
[2] drgn crash analysis:
>>> trace = prog.crashed_thread().stack_trace()
>>> trace
(0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15)
(1) __crash_kexec (kernel/crash_core.c:122:4)
(2) panic (kernel/panic.c:399:3)
(3) oops_end (arch/x86/kernel/dumpstack.c:382:3)
...
(8) process_one_work (kernel/workqueue.c:3168:2)
(9) process_scheduled_works (kernel/workqueue.c:3310:3)
(10) worker_thread (kernel/workqueue.c:3391:4)
(11) kthread (kernel/kthread.c:389:9)
Line workqueue.c:3168 for this kernel version is in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
>>> trace[8]["work"]
*(struct work_struct *)0xffff92577d0a21d8 = {
.data = (atomic_long_t){
.counter = (s64)536870912, <=== Note
},
.entry = (struct list_head){
.next = (struct list_head *)0xffff924d075924c0,
.prev = (struct list_head *)0xffff924d075924c0,
},
.func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280,
}
Suspicion is that pwq is NULL:
>>> trace[8]["pwq"]
(struct pool_workqueue *)<absent>
In process_one_work(), pwq is assigned from:
struct pool_workqueue *pwq = get_work_pwq(work);
and get_work_pwq() is:
static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
if (data & WORK_STRUCT_PWQ)
return work_struct_pwq(data);
else
return NULL;
}
WORK_STRUCT_PWQ is 0x4:
>>> print(repr(prog['WORK_STRUCT_PWQ']))
Object(prog, 'enum work_flags', value=4)
But work->data is 536870912 which is 0x20000000.
So, get_work_pwq() returns NULL and we crash in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
=============================================
Fixes: 925d046e7e ("RDMA/core: Add a netevent notifier to cma")
Cc: stable@vger.kernel.org
Co-developed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/bf0082f9-5b25-4593-92c6-d130aa8ba439@oracle.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Passing a non-literal format string to dev_set_name causes a warning:
drivers/infiniband/core/ucaps.c:173:33: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
173 | ret = dev_set_name(&ucap->dev, ucap_names[type]);
| ^~~~~~~~~~~~~~~~
drivers/infiniband/core/ucaps.c:173:33: note: treat the string as an argument to avoid this
173 | ret = dev_set_name(&ucap->dev, ucap_names[type]);
| ^
| "%s",
Turn the name into the %s argument as suggested by gcc.
Fixes: 61e5168281 ("RDMA/uverbs: Introduce UCAP (User CAPabilities) API")
Link: https://patch.msgid.link/r/20250314155721.264083-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This will be useful for the next patches in the series since port number
is needed for optional counters binding and unbinding.
Note that this change is needed since when the operation is done qp->port
isn't necessarily initialized yet and can't be used.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/b6f6797844acbd517358e8d2a270ea9b3e6ecba1.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Whenever a new counter is created, save inside it the user requested
configuration for optional-counters binding, for manual configuration it
is requested directly by the user and for the automatic configuration it
depends on if the automatic binding was enabled with or without
optional-counters binding.
This argument will later be used by the driver to determine if to bind the
optional-counters as well or not when trying to bind this counter to a QP.
It indicates that when binding counters to a QP we also want the
currently enabled link optional-counters to be bound as well.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/82f1c357606a16932979ef9a5910122675c74a3a.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Change rdma_counter allocation to use rdma_zalloc_drv_obj() instead of,
explicitly allocating at core, in order to be contained inside driver
specific structures.
Adjust all drivers that use it to have their containing structure, and
add driver specific initialization operation.
This change is needed to allow upcoming patches to implement
optional-counters binding whereas inside each driver specific counter
struct his bound optional-counters will be maintained.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/a5a484f421fc2e5595158e61a354fba43272b02d.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, the IB uverbs API calls uobj_get_uobj_read(), which in turn
uses the rdma_lookup_get_uobject() helper to retrieve user objects.
In case of failure, uobj_get_uobj_read() returns NULL, overriding the
error code from rdma_lookup_get_uobject(). The IB uverbs API then
translates this NULL to -EINVAL, masking the actual error and
complicating debugging. For example, applications calling ibv_modify_qp
that fails with EBUSY when retrieving the QP uobject will see the
overridden error code EINVAL instead, masking the actual error.
Furthermore, based on rdma-core commit:
"2a22f1ced5f3 ("Merge pull request #1568 from jakemoroni/master")"
Kernel's IB uverbs return values are either ignored and passed on as is
to application or overridden with other errnos in a few cases.
Thus, to improve error reporting and debuggability, propagate the
original error from rdma_lookup_get_uobject() instead of replacing it
with EINVAL.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/64f9d3711b183984e939962c2f83383904f97dfb.1740577869.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add support for file descriptor array attribute for GET_CONTEXT
commands.
Check that the file descriptor (fd) array represents fds for valid UCAPs.
Store the enabled UCAPs from the fd array as a bitmask in ib_ucontext.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/ebfb30bc947e2259b193c96a319c80e82599045b.1741261611.git.leon@kernel.org
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement a new User CAPabilities (UCAP) API to provide fine-grained
control over specific firmware features.
This approach offers more granular capabilities than the existing Linux
capabilities, which may be too generic for certain FW features.
This mechanism represents each capability as a character device with
root read-write access. Root processes can grant users special
privileges by allowing access to these character devices (e.g., using
chown).
UCAP character devices are located in /dev/infiniband and the class path
is /sys/class/infiniband_ucaps.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/5a1379187cd21178e8554afc81a3c941f21af22f.1741261611.git.leon@kernel.org
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Bound infiniband iwcm and ucma sysctl writings between SYSCTL_ZERO
and SYSCTL_INT_MAX.
The proc_handler has thus been updated to proc_dointvec_minmax.
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Link: https://patch.msgid.link/20250224095826.16458-6-nicolas.bouchinet@clip-os.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 467f432a52 ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a52 ("RDMA/core: Split port and device counter sysfs attributes")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maher Sanalla <msanalla@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A single scatter-gather entry is limited by a 32 bits "length" field
that is practically 4GB - PAGE_SIZE. This means that even when the
memory is physically contiguous, we might need more than one entry to
represent it. Additionally when using dmabuf, the sg_table might be
originated outside the subsystem and optimized for other needs.
For instance an SGT of 16GB GPU continuous memory might look like this:
(a real life example)
dma_address 34401400000, length fffff000
dma_address 345013ff000, length fffff000
dma_address 346013fe000, length fffff000
dma_address 347013fd000, length fffff000
dma_address 348013fc000, length 4000
Since ib_umem_find_best_pgsz works within SG entries, in the above case
we will result with the worst possible 4KB page size.
Fix this by taking into consideration only the alignment of addresses of
real discontinuity points rather than treating SG entries as such, and
adjust the page iterator to correctly handle cross SG entry pages.
There is currently an assumption that drivers do not ask for pages
bigger than maximal DMA size supported by their devices.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250217141623.12428-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enhance visibility into IB device state transitions by adding log messages
to the kernel log (dmesg). Whenever an IB device changes state, a relevant
print will be printed, such as:
"mlx5_core 0000:08:00.0 mlx5_0: Port: 1 Link DOWN"
"mlx5_core 0000:08:00.0 rdmap8s0f0: Port: 2 Link ACTIVE"
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/2d26ccbd669bad99089fa2aebb5cba4014fc4999.1738586601.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Because the type of tun device is ARPHRD_NONE, in cma, ARPHRD_NONE is
not recognized. To RXE device, just as SIW does, ARPHRD_NONE is added
to support.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250119172831.3123110-4-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp, efa,
cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them to
drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ5JkNAAKCRCFwuHvBreF
YeCwAP9nrzFZMBEa0DVx7V8w3sotQCOzaaoi+4UOigeleppKSAD+K7QA5CIwNf7j
x0apvJlNsXKSYJVUI2rch/qIL8ckQwM=
=wIYu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
Alot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible integer
overflow
- Many bnxt_re fixes:
* Crashes due to a mismatch in the maximum SGE list size
* Don't waste memory for user QPs by creating kernel-only structures
* Fix compatability issues with older HW in some of the new HW features
recently introduced: RTS->RTS feature, work around 9096
* Do not allow destroy_qp to fail
* Validate QP MTU against device limits
* Add missing validation on madatory QP attributes for RTR->RTS
* Report port_num in query_qp as required by the spec
* Fix creation of QPs of the maximum queue size, and in the variable mode
* Allow all QPs to be used on newer HW by limiting a work around only to
HW it affects
* Use the correct MSN table size for variable mode QPs
* Add missing locking in create_qp() accessing the qp_tbl
* Form WQE buffers correctly when some of the buffers are 0 hop
* Don't crash on QP destroy if the userspace doesn't setup the dip_ctx
* Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
* Consistently use ENXIO for return codes if the devices is fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted due to
breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which syzkaller
found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly activing
new device features and failing
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ3fvrwAKCRCFwuHvBreF
YSuIAQDNZ8fPvjVdL8x1QIUVParAAewEUv3MbmV1uRVgoG7LrQEAxgw6UIUF4HOw
u6aW8aRXGYM3hG241AKoYnU5yqHl4g0=
=ilfd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
Currently the dispatching of link status events is implemented by
each RDMA driver independently, and most of them have very similar
patterns. Add support for this in ib_core so that we can get rid
of duplicate codes in each driver.
A new last_port_state is added in ib_port_cache to cache the port
state of the last link status events dispatching. The original
port_state in ib_port_cache is not used here because it will be
updated when ib_dispatch_event() is called, which means it may
be changed between two link status events, and may lead to a loss
of event dispatching.
Some drivers currently have some private stuff in their link status
events handler in addition to event dispatching, and cannot be
perfectly integrated into the ib_core handling process. For these
drivers, add a new ops report_port_event() so that they can keep
their current processing.
Finally, events of LAG devices are not supported yet in this patch
as currently there is no way to obtain ibdev from upper netdev in
ib_core. This can be a TODO work after the core have more support
for LAG.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Query the port number of a netdev associated with an ibdev.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ib_copy_path_rec_from_user() has been unused since 2019's
commit a1a8e4a85c ("rdma: Delete the ib_ucm module")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241221014021.343979-5-linux@treblig.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The last use of ibdev_printk() was removed in 2019 by
commit b2299e8381 ("RDMA: Delete DEBUG code")
Remove it.
Note: The __ibdev_printk() is still used in the idev_err etc functions
so leave that.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241221014021.343979-4-linux@treblig.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The last use of ib_find_exact_cached_pkey() was removed in 2012
by commit 2c75d2ccb6 ("IB/mlx4: Fix QP1 P_Key processing in the Primary
Physical Function (PPF)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241221014021.343979-3-linux@treblig.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ib_ud_header_unpack() is unused, and I can't see any sign of it
ever having been used in git. The only reference I can find
is from December 2004 BKrev: 41d30034XNbBUl0XnyC6ig9V61Nf-A when
it looks like it was added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241221014021.343979-2-linux@treblig.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If traffic is over vlan, cma_validate_port() fails to match
net_device ifindex with bound_if_index and results in ENODEV error.
As iWARP gid table is static, it contains entry corresponding to
only one net device which is either real netdev or vlan netdev for
cases like siw attached to a vlan interface.
This patch fixes the issue by assigning bound_if_index with net
device index, if real net device obtained from bound if index matches
with net device retrieved from gid table
Fixes: f8ef1be816 ("RDMA/cma: Avoid GID lookups on iWARP devices")
Link: https://lore.kernel.org/all/ZzNgdrjo1kSCGbRz@chelsio.com/
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241203140052.3985-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications.
Fixes: 67cdb40ca4 ("[IB] uverbs: Implement more commands")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/b8765ab3-c2da-4611-aae0-ddd6ba173d23@stanley.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes, CQ
coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZz4ENwAKCRCFwuHvBreF
YQYQAP9R54r5J1Iylg+zqhCc+e/9oveuuZbfLvy/EJiEpmdprQEAgPs1RrB0z7U6
1xrVStUKNPhGd5XeVVZGkIV0zYv6Tw4=
=V5xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
A DREQ is sent in 2 situations:
1. When requested by the user.
This DREQ has to wait for a DREP, which will be routed to the user.
2. When the cm_id is destroyed.
This DREQ is generated by the CM to notify the peer that the
connection has been destroyed.
In the latter case, any DREP that is received will be discarded.
There's no need to hold a reference on the cm_id. Today, both
situations are covered by the same function: cm_send_dreq_locked().
When invoked in the cm_id destroy path, the cm_id reference would be
held until the DREQ completes, blocking the destruction. Because it
could take several seconds to minutes before the DREQ receives a DREP,
the destroy call posts a send for the DREQ then immediately cancels the
MAD. However, cancellation is not immediate in the MAD layer. There
could still be a delay before the MAD layer returns the DREQ to the CM.
Moreover, the only guarantee is that the DREQ will be sent at most once.
Introduce a separate flow for sending a DREQ when destroying the cm_id.
The new flow will not hold a reference on the cm_id, allowing it to be
cleaned up immediately. The cancellation trick is no longer needed.
The MAD layer will send the DREQ exactly once.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/a288a098b8e0550305755fd4a7937431699317f4.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Typically, when the CM sends a MAD it bumps a reference count
on the associated cm_id. There are some exceptions, such
as when the MAD is a direct response to a receive MAD. For
example, the CM may generate an MRA in response to a duplicate
REQ. But, in general, if a MAD may be sent as a result of
the user invoking an API call (e.g. ib_send_cm_rep(),
ib_send_cm_rtu(), etc.), a reference is taken on the cm_id.
This reference is necessary if the MAD requires a response.
The reference allows routing a response MAD back to the
cm_id, or, if no response is received, allows updating the
cm_id state to reflect the failure.
For MADs which do not generate a response from the
target, however, there's no need to hold a reference on the cm_id.
Such MADs will not be retried by the MAD layer and their
completions do not change the state of the cm_id.
There are 2 internal calls used to allocate MADs which take
a reference on the cm_id: cm_alloc_msg() and cm_alloc_priv_msg().
The latter calls the former. It turns out that all other places
where cm_alloc_msg() is called are for MADs that do not generate
a response from the target: sending an RTU, DREP, REJ, MRA, or
SIDR REP. In all of these cases, there's no need to hold a
reference on the cm_id.
The benefit of dropping unneeded references is that it allows
destruction of the cm_id to proceed immediately. Currently,
the cm_destroy_id() call blocks as long as there's a reference
held on the cm_id. Worse, is that cm_destroy_id() will send
MADs, which it then needs to complete. Sending the MADs is
beneficial, as they notify the peer that a connection is
being destroyed. However, since the MADs hold a reference
on the cm_id, they block destruction and cannot be retried.
Move cm_id referencing from cm_alloc_msg() to cm_alloc_priv_msg().
The latter should hold a reference on the cm_id in all cases but
one, which will be handled in a separate patch. cm_alloc_priv_msg()
is used when sending a REQ, REP, DREQ, and SIDR REQ, all of which
require a response.
Also, merge common code into cm_alloc_priv_msg() and combine the
freeing of all messages which do not need a response.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1f0f96acace72790ecf89087fc765dead960189e.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In several situations the CM may send a reply to a received MAD
without the reply being directly linked with a cm_id. For
example, it may send a REJ in response to a REQ which does not
match a listener. Or, it may send a DREP in response to a DREQ
if the cm_id has already been destroyed. This can happen if the
original DREP was lost and the DREQ was retried.
When such a response MAD completes, it updates a counter tracking
how many MADs were retried. However, not all response MADs issued
directly by the CM may be retries. The REJ mentioned in the example
above is such a case. To distinguish between responses which were
retries versus those that are not, the send_handler performs the
following check: is a retry if the response is not associated with
a cm_id and the response is not a REJ message.
Replace this indirect method of checking if a response is a retry
with an explicit check. Note that these retries are generated
directly by the CM, rather than retried by the MAD layer.
This change will be needed by later changes which would otherwise
break the indirect check.
Signed-off-by: Sean Hefty <shefty@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1ee6e2a68f8de1992b9da23aa1d7e3f9f25e0036.1731495873.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement event sending for IB device rename and IB device
port associated netdevice rename.
In iproute2, rdma monitor displays the IB device name, port
and the netdevice name when displaying event info. Since
users can modiy these names, we track and notify on renaming
events.
Note: In order to receive netdevice rename events, drivers
must use the ib_device_set_netdev() API when attaching net
devices to IB devices.
$ rdma monitor
$ rmmod mlx5_ib
[UNREGISTER] dev 1 rocep8s0f1
[UNREGISTER] dev 0 rocep8s0f0
$ modprobe mlx5_ib
[REGISTER] dev 2 mlx5_0
[NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2
[REGISTER] dev 3 mlx5_1
[NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3
[RENAME] dev 2 rocep8s0f0
[RENAME] dev 3 rocep8s0f1
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
[UNREGISTER] dev 2 rocep8s0f0
[REGISTER] dev 4 mlx5_0
[NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2
[RENAME] dev 4 rdmap8s0f0
$ echo 4 > /sys/class/net/eth2/device/sriov_numvfs
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7
[REGISTER] dev 5 mlx5_0
[NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8
[REGISTER] dev 6 mlx5_1
[NETDEV_ATTACH] dev 6 mlx5_1 port 1 netdev 12 eth9
[RENAME] dev 5 rocep8s0f0v0
[RENAME] dev 6 rocep8s0f0v1
[REGISTER] dev 7 mlx5_0
[NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10
[RENAME] dev 7 rocep8s0f0v2
[REGISTER] dev 8 mlx5_0
[NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11
[RENAME] dev 8 rocep8s0f0v3
$ ip link set eth2 name myeth2
[NETDEV_RENAME] netdev 4 myeth2
$ ip link set eth1 name myeth1
** no events received, because eth1 is not attached to
an IB device **
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/093c978ef2766fd3ab4ff8798eeb68f2f11582f6.1730367038.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In light of the previous commit, make the ib_uverbs_file accessible to
drivers by moving its definition to uverbs_types.h, to allow drivers to
freely access the struct argument and create a personalized cleanup flow.
For the same reason expose uverbs_try_lock_object function to allow driver
to safely access the uverbs objects.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/29b718e0dca35daa5f496320a39284fc1f5a1722.1730373303.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a driver operation to allow preemptive cleanup of ufile HW resources
before the standard ufile cleanup flow begins. Thus, expediting the
final cleanup phase which leads to fast teardown overall.
This allows the use of driver specific clean up procedures to make the
cleanup process more efficient.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/cabe00d75132b5732cb515944e3c500a01fb0b4a.1730373303.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rdma_roce_rescan_port() scans all network devices in
the system and adds the gids if relevant to the RoCE device
port. When not in bonding mode it adds the GIDs of the
netdevice in this port. When in bonding mode it adds the
GIDs of both the port's netdevice and the bond master
netdevice.
Export roce_del_all_netdev_gids(), which removes all GIDs
associated with a specific netdevice for a given port.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/674d498da4637a1503ff1367e28bd09ff942fd5e.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If traffic is over vlan, cma_validate_port() fails to match vlan
net_device ifindex with bound_if_index and results in ENODEV error.
It is because rdma_copy_src_l2_addr() always assigns bound_if_index with
real net_device ifindex.
This patch fixes the issue by assigning bound_if_index with vlan
net_device index if traffic is over vlan.
Fixes: f8ef1be816 ("RDMA/cma: Avoid GID lookups on iWARP devices")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241008114334.146702-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
nlmsg_put() may return a NULL pointer assigned to nlh, which will later
be dereferenced in nlmsg_end().
Fixes: 9cbed5aab5 ("RDMA/nldev: Add support for RDMA monitoring")
Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007Z
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Provide a new api rdma_user_mmap_disassociate() for drivers to
disassociate mmap pages for a device.
Since drivers can now disassociate mmaps by calling this api,
introduce a new disassociation_lock to specifically prevent
races between this disassociation process and new mmaps. And
thus the old hw_destroy_rwsem is not needed in this api.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts, hfi,
erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New "rdma monitor" netlink mechanism
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZvGZowAKCRCFwuHvBreF
YcvbAP9abSxZte3zzG1ZJ/6BShSCGJvu4RMMMQI6wNJWZZiJ5wEA18MdaWzGFS8O
BzP48Z/0VGsd2MOfNX4JeyYIs7SNYQA=
=FXLo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/core/nldev.c:2795:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
2795 | default:
| ^
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 9cbed5aab5 ("RDMA/nldev: Add support for RDMA monitoring")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240916-rdma-fix-clang-fallthrough-nl_notify_err_msg-v1-1-89de6a7423f1@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Extend the "rdma sys" command to display whether RDMA
monitoring is supported.
RDMA monitoring is not supported in mlx4 because it does
not use the ib_device_set_netdev() API, which sends the
RDMA events.
Example output for kernel where monitoring is supported:
$ rdma sys show
netns shared privileged-qkey off monitor on copy-on-fork on
Example output for kernel where monitoring is not supported:
$ rdma sys show
netns shared privileged-qkey off monitor off copy-on-fork on
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce a new netlink command to allow rdma event monitoring.
The rdma events supported now are IB device
registration/unregistration and net device attachment/detachment.
Example output of rdma monitor and the commands which trigger
the events:
$ rdma monitor
$ rmmod mlx5_ib
[UNREGISTER] dev 1 rocep8s0f1
[UNREGISTER] dev 0 rocep8s0f0
$ modprobe mlx5_ib
[REGISTER] dev 2 mlx5_0
[NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2
[REGISTER] dev 3 mlx5_1
[NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev
[UNREGISTER] dev 2 rocep8s0f0
[REGISTER] dev 4 mlx5_0
[NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2
$ echo 4 > /sys/class/net/eth2/device/sriov_numvfs
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6
[NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7
[REGISTER] dev 5 mlx5_0
[NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8
[REGISTER] dev 6 mlx5_0
[NETDEV_ATTACH] dev 6 mlx5_0 port 1 netdev 12 eth9
[REGISTER] dev 7 mlx5_0
[NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10
[REGISTER] dev 8 mlx5_0
[NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11
$ echo 0 > /sys/class/net/eth2/device/sriov_numvfs
[UNREGISTER] dev 5 rocep8s0f0v0
[UNREGISTER] dev 6 rocep8s0f0v1
[UNREGISTER] dev 7 rocep8s0f0v2
[UNREGISTER] dev 8 rocep8s0f0v3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 2
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 3
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 4
[NETDEV_DETACH] dev 4 rdmap8s0f0 port 5
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Shay Drory
Sharath Srinivasan
Arnd Bergmann
Maher Sanalla
Patrisious Haddad
Wang Liang
Chiara Meiohas
Nicolas Bouchinet
Roman Gushchin
Michael Margolin
Zhu Yanjun
Linus Torvalds
Yuyu Li
Dr. David Alan Gilbert
Anumula Murali Mohan Reddy
Dan Carpenter
Peter Zijlstra
Sean Hefty
Leon Romanovsky
Al Viro
Qianqiang Liu
Chengchang Tang
Nathan Chancellor