Limit the link rate to HBR3 or below (<=8.1Gbps) in SST mode.
UHBR (10Gbps+) link rates require 128b/132b channel encoding
which we have not yet hooked up into the SST/no-sideband codepaths.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208154552.14545-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 6061811d72)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration
-----BEGIN PGP SIGNATURE-----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=d13e
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is just a wrap up of fixes from the last few days. It has the
proper fix to the i915/xe collision, we can clean up what you did
later once rc1 lands.
Otherwise it's a few other i915, a v3d, rockchip and a nouveau fix to
make GSP load on some original Turing GPUs.
i915:
- Fixes for kernel-doc warnings enforced in linux-next
- Another build warning fix for string formatting of intel_wakeref_t
- Display fixes for DP DSC BPC and C20 PLL state verification
v3d:
- register readout fix
rockchip:
- two build warning fixes
nouveau:
- fix GSP loading on Turing with different nvdec configuration"
* tag 'drm-next-2024-01-15-1' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: handle engines in runl without nonstall interrupts.
drm/i915/perf: reconcile Excess struct member kernel-doc warnings
drm/i915/guc: reconcile Excess struct member kernel-doc warnings
drm/i915/gt: reconcile Excess struct member kernel-doc warnings
drm/i915/gem: reconcile Excess struct member kernel-doc warnings
drm/i915/dp: Fix the max DSC bpc supported by source
drm/i915: don't make assumptions about intel_wakeref_t type
drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
drm/i915/display: Fix C20 pll selection for state verification
drm/v3d: Fix support for register debugging on the RPi 4
drm/rockchip: vop2: Drop unused if_dclk_rate variable
drm/rockchip: vop2: Drop superfluous include
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
Use correct helper for getting max DSC bpc supported by the source.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
(cherry picked from commit cd7b0b2dd3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Use correct helper for getting max DSC bpc supported by the source.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
Glitches deasserting the connector HPD line can lead to incorrectly
detecting a disconnect event (a glitch asserting the line will only
cause a redundant connect->disconnect transition). The source of such a
glitch can be noise on the line or a 0.5ms-1ms MST IRQ_HPD pulse. TypeC
ports in the DP-alt or TBT-alt mode filter out these glitches inernally,
but for others the driver has to do this. Make it so by polling the HPD
line on these connectors for 4 ms.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-12-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add hooks to intel_digital_port to lock and unlock the port and add a
helper to check the connector's detect status while the port is locked
already. This simplifies checking the connector detect status in
intel_dp_aux_xfer() and intel_digital_port_connected() in the next two
patches aborting AUX transfers on all DP connectors (except eDP) and
filtering HPD glitches.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-11-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
As described in the previous two patches an unexpected connector
detection can happen during the init/shutdown sequences. Prevent these
by returning the connector's current status from the detection handlers.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-10-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
As described in the previous patch, an unexpected connector
detection/modeset started from the intel_hotplug::hotplug_work can
happen during the driver init/shutdown sequence. Prevent these by
disabling the queuing of and flushing all the intel_hotplug work that
can start them at the beginning of the init/shutdown sequence and allow
the queuing only while the display is in the initialized state.
Other work items - like the intel_connector::modeset_retry_work or the
MST probe works - are still enabled and can start a detection/modeset,
but after the previous patch these will be rejected. Disabling these
works as well is for a follow-up patchset.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-9-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
After an HPD IRQ storm on a connector intel_hpd_irq_storm_detect() will
set the connector's HPD pin state to HPD_MARK_DISABLED and the IRQ gets
disabled. Subsequently intel_hpd_irq_storm_switch_to_polling() will
enable polling for these connectors, setting the pin state to
HPD_DISABLED, but only if the connector's base.polled field is set to
DRM_CONNECTOR_POLL_HPD. intel_hpd_irq_storm_reenable_work() will
reenable the IRQ - after 2 minutes - if the pin state is HPD_DISABLED.
The connectors will be created with their base.polled field set to 0,
which gets initialized only later in i915_hpd_poll_init_work() (using
intel_connector::polled). If a storm is detected on a connector after
it's created and IRQs are enabled on it - by intel_hpd_init() - and
before its bease.polled field is initialized in the above work, the
connector's HPD pin will stay in the HPD_MARK_DISABLED state - leaving
the IRQ disabled indefinitely - and polling will not get enabled on it as
intended.
I can't see a reason for initializing base.polled in a delayed manner,
so do this already when creating the connector, to prevent the above
race condition.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-2-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Using link_status to get DPCD_REV fails when disabling/defaulting
phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly.
Fixes: 8cdf727119 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-3-khaled.almahallawy@intel.com
(cherry picked from commit 3ee302ec22)
Pipe config check is currently ignoring vsc sdp changes completely
if psr is enabled. We want to ignore only PSR part of it as there
might be changes in colorimetry data. Also read back vsc_sdp when psr is
used.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-6-jouni.hogander@intel.com
Colorimetry support is not really a PSR specific thing. Move it to intel_dp
struct and use it also when preparing vsc sdp for non-PSR case.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Shawn Lee <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-3-jouni.hogander@intel.com
Using link_status to get DPCD_REV fails when disabling/defaulting
phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly.
Fixes: 8cdf727119 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-3-khaled.almahallawy@intel.com
Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source tests.
v2: rebase
v3:
- Enable TPS4 only for supported platforms (Jani)
- Uppercase in macro names (Jani)
- Fix indentation (Jani)
- Use drm_warn instead of WARN
v4: Disable TPS4 pattern on supported platforms only
Bspec: 50482, 50484, 7557
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-2-khaled.almahallawy@intel.com
Starting from DP2.0 specs, DPCD 248h is renamed
LINK_QUAL_PATTERN_SELECT and it has the same values of registers
DPCD 10Bh-10Eh.
Use the PHY pattern names defined for DPCD 10Bh-10Eh in order to add
CP2520 Pattern 3 (TPS4) phy pattern support in the next
patch of this series and DP2.1 PHY patterns for future series.
v2: rebase
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-1-khaled.almahallawy@intel.com
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmVyFWMACgkQ+mJfZA7r
E8rVUwf/RWWyIyrlSOvz7okNgLtTn9K2A3WdtY6hPK6XZ/LVlO9MbCPT74E8Pnh3
mtxFK8fma8nXoVWCOxwtLI9HKJXiMgTIxpKAqapO2cU/ScpRZYoRJjaVIEMjiEWs
AhFSh/9D+u6hXeuYhAsg101sbmWmgvoIgoA4Ob2bUNyJOgsi5rLYsCsd0Y5i0qwm
CHvoyabZMXH4cYn19GlfOIxFtJ4StfaTfd5lNKAmXGrfoWTDQ5WkouXSaZ5EozoW
bl7gaF0kxbXH0RPw/A5VfmbHVaOnjWXIYNYN/51u3nvc4Oi1qeoDhKPmp9uJJ8Hr
AfqDo4h2WZkreuy+hB79uFa/YQA92Q==
=XV0u
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7 ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e0ef2daa8c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7 ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Unfortunately even the HPD based detection added in
commit cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
fails to detect that the VBT's eDP/DDI-A is a ghost on
Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD
asserted despite nothing being actually connected there :(
The straps/fuses also indicate that the eDP port is present.
So if one boots with a VGA monitor connected the eDP probe will
mistake the DP->VGA converter hooked to DDI-E for an eDP panel
on DDI-A.
As a last resort check what kind of DP device we've detected,
and if it looks like a DP->VGA converter then conclude that
the eDP port should be ignored.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit fcd479a791)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Simplify intel_dp_max_data_rate() using
drm_dp_bw_channel_coding_efficiency() to calculate the max data rate for
both DP1.4 and UHBR link rates. This trades a redundant multiply/divide
for readability.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-11-imre.deak@intel.com
Callers of intel_dp_max_data_rate() use the return value as an upper
bound for the BW a given mode requires. As such the rounding shouldn't
result in a bigger value than the actual upper bound. Use round-down
instead of -closest accordingly.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-10-imre.deak@intel.com
Atm the allocated MST PBN value is calculated from the TU size (number
of allocated MTP slots) as
PBN = TU * pbn_div
pbn_div being the link BW for each MTP slot. For DP 1.4 link rates this
worked, as pbn_div there is guraranteed to be an integer number, however
on UHBR this isn't the case. To get a PBN, TU pair where TU is a
properly rounded-up value covering all the BW corresponding to PBN,
calculate first PBN and from PBN the TU value.
Calculate PBN directly from the effective pixel data rate, instead of
calculating it indirectly from the corresponding TU and pbn_div values
(which are in turn derived from the pixel data rate and BW overhead).
Add a helper function to calculate the effective data rate, also adding
a note that callers of intel_dp_link_required() may also need to check
the effective data rate (vs. the data rate w/o the BW overhead).
While at it add a note to check if WA#14013163432 is applicable.
v2:
- Fix PBN calculation, deriving it from the effective data rate directly
instead of using the indirect TU and pbn_div values for this.
- Add a note about WA#14013163432. (Arun)
v3:
- Fix rounding up quotient while calculating remote_tu. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117150929.1767227-3-imre.deak@intel.com
The link M/N ratio is the data rate / link symbol clock rate, fix things
up accordingly. On DP 1.4 this ratio was correct as the link symbol clock
rate in that case matched the link data rate (in bytes/sec units, the
symbol size being 8 bits), however it wasn't correct for UHBR rates
where the symbol size is 32 bits.
Kudos to Arun noticing in Bspec the incorrect use of link data rate in
the ratio's N value.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-7-imre.deak@intel.com
Unfortunately even the HPD based detection added in
commit cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
fails to detect that the VBT's eDP/DDI-A is a ghost on
Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD
asserted despite nothing being actually connected there :(
The straps/fuses also indicate that the eDP port is present.
So if one boots with a VGA monitor connected the eDP probe will
mistake the DP->VGA converter hooked to DDI-E for an eDP panel
on DDI-A.
As a last resort check what kind of DP device we've detected,
and if it looks like a DP->VGA converter then conclude that
the eDP port should be ignored.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
If force_dsc_fractional_bpp_en is set through debugfs allow DSC iff
compressed bpp is fractional. Continue if the computed compressed bpp
turns out to be a integer.
v2:
-Use helpers for fractional, integral bits of bits_per_pixel. (Suraj)
-Fix comment (Suraj)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-9-ankit.k.nautiyal@intel.com
This patch adds support to iterate over compressed output bpp as per the
fractional step, supported by DP sink.
v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-7-ankit.k.nautiyal@intel.com
MTL+ supports fractional compressed bits_per_pixel, with precision of
1/16. This compressed bpp is stored in U6.4 format.
Accommodate this precision while computing m_n values.
v1:
Replace the computation of 'data_clock' with 'data_clock =
DIV_ROUND_UP(data_clock, 16).' (Sui Jingfeng).
v2:
Rebase and pass bits_per_pixel in U6.4 format.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-4-ankit.k.nautiyal@intel.com
DSC parameter bits_per_pixel is stored in U6.4 format.
The 4 bits represent the fractional part of the bpp.
Currently we use compressed_bpp member of dsc structure to store
only the integral part of the bits_per_pixel.
To store the full bits_per_pixel along with the fractional part,
compressed_bpp is changed to store bpp in U6.4 formats. Intergral
part is retrieved by simply right shifting the member compressed_bpp by 4.
v2:
-Use to_bpp_int, to_bpp_frac_dec, to_bpp_x16 helpers while dealing
with compressed bpp. (Suraj)
-Fix comment styling. (Suraj)
v3:
-Add separate file for 6.4 fixed point helper(Jani, Nikula)
-Add comment for magic values(Suraj)
v4:
-Fix checkpatch warnings caused by renaming(Suraj)
v5:
-Rebase.
-Use existing helpers for conversion of bpp_int to bpp_x16
and vice versa.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-3-ankit.k.nautiyal@intel.com
Modify existing PSR implementation to enable panel replay feature of DP 2.0
which is similar to PSR feature of EDP panel. There is different DPCD
address to check panel capability compare to PSR and vsc sdp header
is different.
v1: Initial version.
v2:
- Set source_panel_replay_support flag under HAS_PANEL_REPLAY()
condition check. [Jouni]
- Code restructured around intel_panel_replay_init
and renamed to intel_panel_replay_init_dpcd. [Jouni]
- Remove the initial code modification around has_psr2 flag. [Jouni]
- Add CAN_PANEL_REPLAY() in intel_encoder_can_psr which is used to
enable in intel_psr_post_plane_update. [Jouni]
v3:
- Initialize both psr and panel-replay. [Jouni]
- Initialize both panel replay and psr if detected. [Jouni]
- Refactoring psr function by introducing _psr_compute_config(). [Jouni]
- Add check for !is_edp while deriving source_panel_replay_support. [Jouni]
- Enable panel replay dpcd initialization in a separate patch. [Jouni]
v4:
- HAS_PANEL_REPLAY() check not needed during sink capability check. [Jouni]
- Set either panel replay source support or psr. [Jouni]
v5:
- HAS_PANEL_REPLAY() removed and use HAS_DP20() instead. [Jouni]
- Move psr related code to intel_psr.c. [Jani]
- Reset sink_panel_replay_support flag during disconnection. [Jani]
v6: return statement restored which is removed by misatke. [Jouni]
v7: cosmetic changes. [Arun]
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-4-animesh.manna@intel.com
Currently we seem to be using wrong DPCD register for reading
compressed bpps, reading min/max input bpc instead of compressed bpp.
Fix that, so that we now apply min/max compressed bpp limitations we
get from DP Spec Table 2-157 DP v2.0 and/or correspondent DPCD
register DP_DSC_MAX_BITS_PER_PIXEL_LOW/HIGH.
This might also allow us to get rid of an ugly compressed bpp
recalculation, which we had to add to make some MST hubs usable.
v2: - Fix operator precedence
v3: - Added debug info about compressed bpps
v4: - Don't try to intersect Sink input bpp and compressed bpps.
v5: - Decrease step while looking for suitable compressed bpp to
accommodate.
v6: - Use helper for getting min and max compressed_bpp (Ankit)
v7: - Fix checkpatch warning (Ankit)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-31-imre.deak@intel.com
At the moment modesetting a stream CRTC will fail if the stream's BW
along with the current BW of all the other streams on the same MST link
is above the total BW of the MST link. Make the BW sharing more dynamic
by trying to reduce the link bpp of one or more streams on the MST link
in this case.
When selecting a stream to reduce the BW for, take into account which
link segment in the MST topology ran out of BW and which streams go
through this link segment. For instance with A,B,C streams in the same
MST topology A and B may share the BW of a link segment downstream of a
branch device, stream C not downstream of the branch device, hence not
affecting this BW. If this link segment's BW runs out one or both of
stream A/B's BW will be reduced until their total BW is within limits.
While reducing the link bpp for a given stream DSC may need to be
enabled for it, which requires FEC on the whole MST link. Check for this
condition and recompute the state for all streams taking the FEC
overhead into account (on 8b/10b links).
v2:
- Rebase on s/min_bpp_pipes/min_bpp_reached_pipes/ change.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-29-imre.deak@intel.com
Enable DSC decompression for all streams. In particular atm if a sink is
connected to a last branch device that is downstream of the first branch
device connected to the source, decompression is not enabled for it.
Similarly it's not enabled if the sink supports this with the last
branch device passing through the compressed stream to it.
Enable DSC in the above cases as well. Since last branch devices may
handle the decompression for multiple ports, toggling DSC needs to be
refcounted, add this using the DSC AUX device as a reference.
v2:
- Fix refcounting, setting/clearing
connector->dp.dsc_decompression_enabled always as needed. (Stan)
- Make the refcounting more uniform for the SST vs. MST case.
- Add state checks for connector->dp.dsc_decompression_enabled and
connector crtc.
- Sanitize connector DSC decompression state during HW setup.
- s/use_count/ref_count/
v3:
- Remove stale TODO: comment to set the actual decompression_aux.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-6-imre.deak@intel.com
Enable passing through DSC streams to the sink in last branch devices.
v2:
- Fix the DPCD register address while setting/clearing the passthrough
flag.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-25-imre.deak@intel.com
Enable DSC using the DSC AUX device stored for this purpose in the
connector. For clarity add separate functions to enable/disable the
decompression, since these sequences will diverge more in follow-up
patches that also enable/disable DSC passthrough and on MST do the
actual enabling/disabling only for the first/last user of the given
AUX device. As a preparation for the latter refcounting change, also
pass the atomic state to the functions.
While at it set/clear only the DP_DECOMPRESSION_EN flag in the
DP_DSC_ENABLE DPCD register, preserving the reserved register bits.
Besides preserving the reserved register bits, the behavior stays as
before, as DSC is still only enabled for the first MST stream (which a
follow-up patch changes, enabling it for all streams).
v2:
- Add a helper function setting/clearing the decompression flag,
preserving the reserved register bits.
v3:
- Add separate functions to enable/disable decompression and pass the
atomic state to these.
- Add DocBook for both functions.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-24-imre.deak@intel.com
Atm the DSC PPS SDP will stay enabled after enabling and disabling DSC.
This leaves an output blank after switching off DSC on it. Make sure the
SDP is disabled for an uncompressed output.
v2:
- Disable the SDP already during output disabling. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-17-imre.deak@intel.com
A follow-up MST patch will need to specify the total BW allocation
overhead, prepare for that here by passing the amount of overhead
to intel_link_compute_m_n(), keeping the existing behavior.
v2:
- Fix passing the correct crtc_state->fec_enable param in
intel_dp_mst_compute_link_config() /
intel_dp_dsc_mst_compute_link_config().
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-13-imre.deak@intel.com
A follow-up patch will add up all the overheads on a DP link, where it
makes more sense to specify each overhead factor in terms of the added
overhead amount vs. the reciprocal remainder (of usable BW remaining
after deducting the overhead). Prepare for that here, keeping the
existing behavior.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-12-imre.deak@intel.com
Enable FEC in crtc_state, as soon as it's known it will be needed by
DSC. This fixes the calculation of BW allocation overhead, in case DSC
is enabled by falling back to it during the encoder compute config
phase (vs. enabling FEC due to DSC being enabled on other streams).
v2:
- Enable FEC only in intel_dp_mst_find_vcpi_slots_for_bpp(), since
only by that will crtc_state->port_clock be set, which in turn is
needed by intel_dp_is_uhbr().
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-11-imre.deak@intel.com
We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling
hotplug detection on the g45 HDMI/DP ports. Currently we do said
reprogamming from the DP/HDMI connector initialization functions.
That code should be mostly platform agnostic so clearly not the
best place for this. Move the workaround to the place where we
actually enable HPD detection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650f3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.
Cc: <stable@vger.kernel.org>
BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmUxVawACgkQ+mJfZA7r
E8pKKAf9H6aS95fUeIqrxzkzGVrZ/faOulxzvAG/a0BsNI7SlwAGkQt/z4XWevxY
iZmmJnIxggrP9pWObAZ2LWs6pDtWqzMt5NmuacHLWWdeOFYUaZosfRbQHPKt1WGN
fQFsHk+YKQX2ssi3yuHjGDsdN58pA44AI9d1pb6scmu61TPujmF8Mb9wc3CUCMEW
OrXGYhU18jvUoxyPeXAA29iYxn7BYOmw3Zj98ua5V9vopw/dY9UeVgiblz/ag43d
3fSelNPhTB6AYra0zlV4HQfbxSmWTiFbNsbEa8nC0aKqDlVD6LpDOM+ix5KLRwbP
OC08dzMNL7Oen6LRMyyPRymy6Fp1OQ==
=qQGI
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Add new DG2 PCI IDs (Shekhar)
- Remove watchdog timers for PSR on Lunar Lake (Mika Kahola)
- DSB changes for proper handling of LUT programming (Ville)
- Store DSC DPCD capabilities in the connector (Imre)
- Clean up zero initializers (Ville)
- Remove Meteor Lake force_probe protection (RK)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTFW4g6duLtp+Wy0@intel.com
The previous patches converted all users of the DSC DPCD caps to look
these up from the connector, so remove the version stored in intel_dp.
A follow-up patchset will read out the MST connector specific
capabilities in intel_dp_add_mst_connector() ->
intel_dp_mst_read_decompression_port_dsc_caps().
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in the patchset.
v3:
- Rebased on read-out fix for eDP in the patchset.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-3-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in intel_dp_dsc_compute_max_bpp()
instead of the version stored in the encoder.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-7-imre.deak@intel.com
Similarly to eDP and SST-DP connectors read out the DSC capabilities for
MST connectors as well. Atm these will match the root port's DSC caps
and only used after a follow-up change enables the decompression for
each stream separately (vs. the current way of enabling it only globally
in the first branch device downstream of the root port).
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010112504.2156789-3-imre.deak@intel.com
In an MST topology the DSC capabilities are specific to each connector,
retrieved either from the sink if it decompresses the stream, or from a
branch device between the source and the sink in case this branch device
does the decompression. Accordingly each connector needs to cache its
own DSC DPCD and FEC capabilities, along with the AUX device through
which the decompression can be enabled. This patch prepares for that by
storing the capabilities and the DSC AUX device in the connector, for
now these just matching the version stored in intel_dp. The follow-up
patches will convert all users to look up these in the connector instead
of intel_dp, after which the intel_dp copies are removed.
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in previous patch.
v3:
- Rebased on read-out fix for eDP in previous patch.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-2-imre.deak@intel.com
Check only the eDP or the DP specific DPCD revision depending on the
sink type. Pass the corresponding revision to the function, which allows
getting the DSC caps of a branch device (in an MST topology, which has
its own DPCD and so DPCD revision).
While at it use DP_DPCD_REV_14 instead of open coding it and for clarity
add a separate function to read out the DSC capability on eDP.
v2:
- Use DP_DPCD_REV_14 instead of open coding it. (Stan)
- Check EDP_DCPD_REV/DPCD_REV in a clearer way. (Ville)
v3:
- Fix the read-out for eDP in intel_dp_detect().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-1-imre.deak@intel.com
drm/i915 feature pull #2 for v6.7:
Features and functionality:
- Preparation for i915 display code reuse in upcoming Xe driver (Jani)
- Drop the fastboot module parameter and use the platform defaults (Arun)
- Enable new LNL FBC features (Vinod)
- Add LNL display feature capability reads (Vinod)
Refactoring and cleanups:
- Locally enable W=1 warnings by default in i915 (Jani)
- Move HDCP GSC message code to a separate file (Suraj)
- GVT include cleanups (Jani)
- Move more display init under display/ (Jani)
- DPLL ID refactoring (Ville)
- Better abstraction of GT0 (Jani)
- Move VGA decode function to GMCH code (Uma)
- Use local64_try_cmpxchg() to optimize PMU event read (Uros Bizjak)
- Clean up FBC checks (Ville)
- Constify and unify state checker calling conventions (Ville)
- Add display step name helper (Chaitanya)
Documentation:
- Update CCS and GSC CS documentation (Rodrigo)
- Fix a number of documentation typos (Randy Dunlap)
Fixes:
- VLV DSI fixes and quirks (Hans)
- Fix crtc state memory leaks (Suraj)
- Increase LSPCON mode settle timeout (Niko Tsirakis)
- Stop clobbering old crtc state during state check (Ville)
- Fix VLV color state readout (Ville)
- Fix cx0 PHY pipe reset to allow S0iX (Khaled)
- Ensure DP MST pbn_div is up-to-date after sink reconnect (Imre)
- Drop an unnecessary NULL check to fix static analyzer warning (Suraj)
- Use an explicit rather than implicit include for frontbuffer tracking (Jouni)
Merges:
- Backmerge drm-next to fix a conflict (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0m00xew.fsf@intel.com
In some implementations, such as the Qualcomm platforms, the display
driver has no way to query the current HPD state and as such it's
impossible to distinguish between disconnect and attention events.
Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD
state.
Also push the test for unchanged state in the displayport altmode driver
into the i915 driver, to allow other drivers to act upon each update.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.
For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.
Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.
v2:
- Don't assume that a CRTC is already in the atomic state, while
reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
intel_sdvo_compute_config(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
Limit the output link bpp in DSC mode to the link_config_limits
link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC
mode. Atm this doesn't make a difference, the link bpp range being
0 .. max pipe bpp, but a follow-up patch will need a way to reduce max
link bpp below its current value.
v2:
- Add to_bpp_int_roundup() instead of open coding it. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-6-imre.deak@intel.com
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp
range, while in DSC mode it can be set in 1/16 bpp steps to any value
up to the maximum pipe bpp. Update the limits accordingly in both modes
to prepare for a follow-up patch which may need to reduce the max link
bpp value and starts to check the link bpp limits in DSC mode as well.
While at it add more detail to the link limit debug print and print it
also for DSC mode.
v2:
- Add to_bpp_frac_dec() instead of open coding it. (Jani)
v3: (Ville)
- Add BPP_X16_FMT / BPP_X16_ARG.
- Add TODO: comment about initializing the DSC link bpp limits earlier.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-5-imre.deak@intel.com
Computing the non-DSC mode link config is redundant once it's determined
that DSC will be needed, so skip computing it. In a follow-up patch this
simplifies setting the link limits which are dependent on the DSC vs.
non-DSC mode.
While at it sanitize the debug print about the MST DSC fallback path,
making it similar to the SST DSC one.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-4-imre.deak@intel.com
A follow-up patch will need to limit the output link bpp both in the
non-DSC and DSC configuration, so track the pipe and link bpp limits
separately in the link_config_limits struct.
Use .4 fixed point format for link bpp matching the 1/16 bpp granularity
in DSC mode and for now keep this limit matching the pipe bpp limit.
v2: (Jani)
- Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them.
- Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-3-imre.deak@intel.com
Factor out helpers that DP / DP_MST encoders can use to compute the link
rate/lane count and bpp limits. A follow-up patch will call these to
recalculate the limits if DSC compression is required.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-2-imre.deak@intel.com
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog DP SST connectors.
Let's also reorder intel_dp_aux_init() vs. drm_connector_init_with_ddc()
a bit to make sure the i2c aux ch is at least somewhat populated
before we pass it on, though drm_connector_init_with_ddc() does
not actually do anything with it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
On pre-TGL FEC is a port level feature, not a transcoder
level feature, and it's DDI A which doesn't have it, not
trancoder A. Check for the correct thing when determining
whether FEC is supported or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
It is irrelevant for the caller that the max lane count is being
derived from a FIA register, so having "fia" in the function name is
irrelevant. Rename the function accordingly.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230825081638.275795-5-luciano.coelho@intel.com
intel_dp_force() takes the AUX power reference as required by the DP AUX
transactions in intel_dp_set_edid(). However the low level AUX handler
takes this reference already so the get/put in intel_dp_force() can be
dropped. This also fixes a problem where the TC port mode changed while
the AUX power well was enabled.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8779
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830140421.2031111-1-imre.deak@intel.com
Currently for testing an output format with DSC, we just force the
output format, without checking if it can be supported.
This also creates an issue where there is a PCON which might need to
convert from forced output format to the format to sink format.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-19-ankit.k.nautiyal@intel.com
Currently, we take the max lane, rate and pipe bpp, to get the maximum
compressed bpp possible. We then set the output bpp to this value.
This patch provides support to have max bpp, min rate and min lanes,
that can support the min compressed bpp.
v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
-Fix the checks for limits->max/min_bpp while iterating over list of
valid DSC bpcs. (Stan)
v3:
-Refactor the code to have pipe bpp/compressed bpp computation and slice
count calculation separately for different cases.
v4:
-Separate the pipe_bpp calculation for eDP and DP.
v5:
-Get rid of magic numbers for max and min bpp,
and improve documentation. (Stan).
-Use functions for {src_sink}_{min_max}_compressed_bpp (Ville).
v6:
-Remove lines to set link config to max.
v7:
-Split the part to separate edp and dp functions for computing DSC BPP
into separate patch.
v8:
-Separate mechanism to get compressed bpp for ICL,TGL and XELPD+.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-17-ankit.k.nautiyal@intel.com
Currently we check if the pipe_bpp selected is >= the
min DSC bpc/bpp requirement. We do not check if it is <= the max DSC
bpc/bpp requirement.
Add checks for max DSC BPC/BPP constraints while computing the
pipe_bpp when DSC is in use.
v2: Fix the commit message.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-15-ankit.k.nautiyal@intel.com
Refactor code to separate functions for eDP and DP for computing
pipe_bpp/compressed bpp when DSC is involved.
This will help to optimize the link configuration for DP later.
v2: Fix checkpatch warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-14-ankit.k.nautiyal@intel.com
The helper intel_dp_dsc_compute_bpp gives the maximum
pipe bpp that is allowed with DSC.
Rename the this to reflect that it returns max pipe bpp supported
with DSC.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-13-ankit.k.nautiyal@intel.com
For DSC the min BPC is 8 for ICL+ and so the min pipe_bpp is 24.
Check this condition for cases where bpc is forced by debugfs flag
dsc_force_bpc. If the check fails, then WARN and ignore the debugfs
flag.
For MST case the pipe_bpp is already computed (hardcoded to be 24),
and this check is not required.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-11-ankit.k.nautiyal@intel.com
Separate out functions for getting maximum and minimum input BPC based
on platforms, when DSC is used.
v2: Use HAS_DSC macro instead of platform check while getting min input
bpc. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-10-ankit.k.nautiyal@intel.com
For MST the bpc is hardcoded to 8, and pipe bpp to 24.
So avoid forcing DSC bpc for MST case.
v2: Warn and ignore the debug flag than to bail out. (Jani)
v3: Fix dbg message to mention forced bpc instead of bpp.
v4: Fix checkpatch longline warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-9-ankit.k.nautiyal@intel.com
In Bigjoiner check for DSC, bigjoiner interface bits for DP for
DISPLAY > 13 is 36 (Bspec: 49259).
v2: Corrected Display ver to 13.
v3: Follow convention for conditional statement. (Ville)
v4: Fix check for display ver. (Ville)
v5: Added note for 2 PPC. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-6-ankit.k.nautiyal@intel.com
Currently there are many places where we use output_bpp for link bpp and
compressed bpp.
Lets use consistent naming:
output_bpp : The intermediate value taking into account the
output_format chroma subsampling.
compressed_bpp : target bpp for the DSC encoder.
link_bpp : final bpp used in the link.
For 444 sampling without DSC:
link_bpp = output_bpp = pipe_bpp
For 420 sampling without DSC:
output_bpp = pipe_bpp / 2
link_bpp = output_bpp
For 444 sampling with DSC:
output_bpp = pipe_bpp
link_bpp = compressed_bpp, computed with output_bpp (i.e. pipe_bpp in
this case)
For 420 sampling with DSC:
output_bpp = pipe_bpp/2
link_bpp = compressed_bpp, computed with output_bpp
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-5-ankit.k.nautiyal@intel.com
The final link bpp used to calculate the m_n values depend on the
output_format. Though the output_format is set to RGB for MST case and
the link bpp will be same as the pipe bpp, for the sake of semantics,
lets calculate the m_n values with the link bpp, instead of pipe_bpp.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-4-ankit.k.nautiyal@intel.com
While using DSC the compressed bpp is computed assuming RGB output
format. Consider the output_format and compute the compressed bpp
during mode valid and compute config steps.
For DP-MST we currently use RGB output format only, so continue
using RGB while computing compressed bpp for MST case.
v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-2-ankit.k.nautiyal@intel.com
The issue fixed in
commit a8ddac7c9f ("drm/i915: Avoid HPD poll detect triggering a new detect cycle")
on VLV, CHV is still present on platforms where the display hotplug
detection functionality is available whenever the device is in D0 state
(hence these platforms switch to HPD polling only when the device is
runtime suspended).
The above commit avoids an endless i915_hpd_poll_init_work() ->
connector detect loop by making sure that by the end of
i915_hpd_poll_init_work() all display power references acquired by the
connector detect functions which can trigger a new cycle (display core
power domain) are dropped. However on platforms where HPD polling is
enabled/disabled only from the runtime suspend/resume handlers, this is
not ensured: for instance eDP VDD, TypeC port PHYs and the runtime
autosuspend delay may still keep the device runtime resumed (via a power
reference acquired during connector detection and hence result in an
endless loop like the above).
Solve the problem described in the above commit on all platforms, by
making sure that a i915_hpd_poll_init_work() -> connector detect
sequence can't take any power reference in the first place which would
trigger a new cycle, instead of relying on these power references to be
dropped by the end of the sequence.
With the default runtime autosuspend delay (10 sec) this issue didn't
happen in practice, since the device remained runtime resumed for the
whole duration of the above sequence. CI/IGT tests however set the
autosuspend delay to 0, which makes the problem visible, see References:
below.
Tested on GLK, CHV.
v2: Don't warn about a requeued work, to account for disabling
polling directly during driver loading, reset and system resume.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7940#note_1997403
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-1-imre.deak@intel.com
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmTL9/EACgkQ+mJfZA7r
E8oqdQgAtD6j4Lih3rVRSLW5Y64MXnGdIHdNtVzLIOJWKLex3e7lFRvZp8IE6MY/
UifZBQ45UEJAo3kcX36TReKG/URzc6jpu3YA2ihwt6uTJW2bZWmtNgfGgnILssOi
hnOTRaxUwVM6wvi62AUKi6AxtDdHrRzcP+RyqGFvjBP76CuOpYSuJq8AK/PBXKFH
z760SqAWILOXqPG+oUYV9vdAmzY71gWDyi3MJqTYYg4YORK+itKMTbeWtFnEJF59
YqAD+/neZ7Y9FafSajUu9l9E9A9srqVAc2zFlcof2rA2MgJyHRBAl2fP4GY6+TDI
ahjmQY/BNP711SnEGArPkRZdcUSMXA==
=44FM
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com
Currently we just clamp that value to the highest supported one, however that
means, we are not able to fit this into our available bandwidth range, so we
might see glitches or FIFO underruns.
While choosing less compressed bpp than min bpp required to handle the mode is
harmless and might even save some bandwidth, choosing higher compressed bpp than
min bpp required to handle the required mode config, can cause issues.
So in that case lets just conclude that even with DSC, we are not able to comply
with bandwidth requirements and fail.
v2: - s/clamp_t/min_t/ (Luca Coelho)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230629122534.8815-1-stanislav.lisovskiy@intel.com
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to avoid flush_scheduled_work() usage, add a dedicated
workqueue in the drm_i915_private structure. In this way, we don't
need to use the system queue anymore.
This change is mostly mechanical and based on Tetsuo's original
patch[1].
v6 by Jani:
- Also create unordered_wq for mock device
Link: https://patchwork.freedesktop.org/series/114608/ [1]
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com
When intel_dp_init_connector fails, some power wells used in dp aux
communication may not be completely disabled yet. This may result in a
null pointer dereference when icl_aux_pw_to_phy() is called from
icl_combo_phy_aux_power_well_disable() after the encoder and connector
are already freed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221222201804.1380963-1-maarten.lankhorst@linux.intel.com
If the output on a DP-alt link with its sink disconnected is kept
enabled for too long (about 20 sec), then some IOM/TCSS firmware timeout
will cause havoc on the PCI bus, at least for other GFX devices on it
which will stop powering up. Since user space is not guaranteed to do a
disabling modeset in time, switch such disconnected but active links to
TBT mode - which is without such shortcomings - with a 2 second delay.
If the above condition is detected already during the driver load/system
resume sanitization step disable the output instead, as at that point no
user space or kernel client depends on a consistent output state yet and
because subsequent atomic modeset on such connectors - without the
actual sink capabilities available - can fail.
An active/disconnected port as above will also block the HPD status of
other active/disconnected ports to get updated (stuck in the connected
state), until the former port is disabled, its PHY is disconnected and
a ~10 ms delay has elapsed. This means the link state for all TypeC
ports/CRTCs must be rechecked after a CRTC is disabled due to the above
reason. For this disconnect the PHY synchronously after the CRTC/port is
disabled and recheck all CRTCs for the above condition whenever such a
port is disabled.
To account for a race condition during driver loading where the sink is
disconnected after the above sanitization step and before the HPD
interrupts get enabled, do an explicit check/link reset if needed from
the encoder's late_register hook, which is called after the HPD
interrupts are enabled already.
v2:
- Handle an active/disconnected port blocking the HPD state update of
another active/disconnected port.
- Cancel the delayed work resetting the link also from the encoder
enable/suspend/shutdown hooks.
- Rebase on the earlier intel_modeset_lock_ctx_retry() addition,
fixing here the missed atomic state reset in case of a retry.
- Fix handling of an error return from intel_atomic_get_crtc_state().
- Recheck if the port needs to be reset after all the atomic state
is locked and async commits are waited on.
v3:
- Add intel_crtc_needs_link_reset(), instead of open-coding it,
keep intel_crtc_has_encoders(). (Ville)
- Fix state dumping and use a bitmask to track disabled CRTCs in
intel_sanitize_all_crtcs(). (Ville)
- Set internal in intel_atomic_state right after allocating it.
(Ville)
- Recheck all CRTCs (not yet force-disabled) after a CRTC is
force-disabled for any reason (not only due to a link state)
in intel_sanitize_all_crtcs().
- Reduce delay after CRTC disabling to 20ms, and use the simpler
msleep().
- Clarify code comment about HPD behaviour in
intel_sanitize_all_crtcs().
- Move all the TC link reset logic to intel_tc.c .
- Cancel the link reset work synchronously during system suspend,
driver unload and shutdown.
v4:
- Rebased on previous patch, which allows calling the TC port
suspend/cleanup handlers without modeset locks held; remove the
display driver suspended assert from the link reset work
accordingly.
v5: (Ville)
- Remove reset work canceling from intel_ddi_pre_pll_enable().
- Track a crtc vs. pipe mask in intel_sanitize_all_crtcs().
- Add reset_link_commit() to clarify the
intel_modeset_lock_ctx_retry loop.
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5860
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512195513.2699-2-imre.deak@intel.com
Split hotplug irq handling out of i915_irq.[ch] into
display/intel_hotplug_irq.[ch].
The line between the new intel_hotplug_irq.[ch] and the existing
intel_hotplug.[ch] needs further clarification, but the first step is to
move the stuff out of i915_irq.[ch].
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-2-jani.nikula@intel.com
Check for MODE_H_ILLEGAL before calculating max rates, lanes etc.
Move comments about compressed bpp U6.4 format closer to where it is used.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-7-ankit.k.nautiyal@intel.com
Start passing the sink_format, to all functions that take a bool
ycbcr420_output as parameter. This will make the functions generic,
and will serve as a slight step towards 4:2:2 support later.
v2: Rebased.
v3: Correct the checks in places concerned with pipe output. (Ville)
Other minor styling and refactoring fixes, as suggested by Ville.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-5-ankit.k.nautiyal@intel.com
Handle the case with DP to HDMI PCON, where sink_format is set to YCbCr444.
In that case PCON is required to be configured to convert from given
output_format to YCbCR444.
v2: Drop drm_WARN for invalid case, let MISSING_CASE catch it. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-4-ankit.k.nautiyal@intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch uses the members of intel_dp->dfp to only store the
format conversion capabilities of the DP device and uses the crtc_state
sink_format member, to program the protocol-converter for
colorspace/format conversion.
v2: Use sink_format to determine the color conversion config for the
pcon (Ville).
v3: Fix typo: missing 'break' in switch case (lkp kernel test robot).
v4: Add helper to check if DP supports YCBCR420.
v5: Simplify logic for computing output_format, based on the given
sink_format. (Ville).
Added scaler constraint for YCbCr420 output.
v6: Split the patch for Scaler constraint for Ycbcr420.
v7: Simplify the policy for selecting output_format:
Always try for RGB first, followed by YCBCR444, and finally by YCBCR420.
v8: Removed redundant comments, minor refactoring. (Ville)
v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-3-ankit.k.nautiyal@intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and
HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add
4 lane support for c20.
v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK)
Fix lane check (RK)
Fix multiline commenting (Arun)
use usleep_range() instead of msleep() (Andi)
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-2-mika.kahola@intel.com
We need to untangle the mess where some SKL machines (at least)
declare both DDI A and DDI E to be present in their VBT, and
both using AUX A. DDI A is a ghost eDP, wheres DDI E may be a
real DP->VGA converter.
Currently that is handled by checking the VBT child devices
for conflicts before output probing. But that kind of solution
will not work for the ADL phantom dual eDP VBTs. I think on
those we just have to probe the eDP first. And would be nice
to use the same probe scheme for everything.
On these SKL systems if we probe DDI A first (which is only
natural given it's declared by VBT first) we will get an answer
via AUX, but it came from the DP->VGA converter hooked to the
DDI E, not DDI A. Thus we mistakenly register eDP on DDI A
and screw up the real DP device in DDI E.
To fix this let's check the HPD live state during the eDP probe.
If we got an answer via DPCD but HPD is still down let's assume
we got the answer from someone else.
Smoke tested on all my eDP machines (ilk,hsw-ult,tgl,adl) and
I also tested turning off all HPD hardware prior to loading
i915 to make sure it all comes up properly. And I simulated
the failure path too by not turning on HPD sense and that
correctly gave up on eDP.
I *think* Windows might just fully depend on HPD here. I
couldn't really find any other way they probe displays. And
I did find code where they also check the live state prior
to AUX transfers (something Imre and I have also talked
about perhaps doing). That would also solve this as we'd
not succeed in the eDP probe DPCD reads.
Other solutions I've considered:
- Reintrduce DDI strap checks on SKL. Unfortunately we just
don't have any idea how reliable they are on real production
hardware, and commit 5a2376d136 ("drm/i915/skl: WaIgnoreDDIAStrap
is forever, always init DDI A") does suggest that not very.
Sadly that commit is very poor in details :/
Also the systems (Asrock B250M-HDV at least) fixed by commit
41e35ffb38 ("drm/i915: Favor last VBT child device with
conflicting AUX ch/DDC pin") might still not work since we
don't know what their straps indicate. Stupid me for not
asking the reporter to check those at the time :(
We have currently two CI machines (fi-cfl-guc,fi-cfl-8700k
both MS-7B54/Z370M) that also declare both DDI A and DDI E
in VBT to use AUX A, and on these the DDI A strap is also
set. There doesn't seem to be anything hooked up to either
DDI however. But given the DDI A strap is wrong on these it
might well be wrong on the Asrock too.
Most other CI machines seem to have straps that generally
match the VBT. fi-kbl-soraka is an exception though as DDI D
strap is not set, but it is declared in VBT as a DP++ port.
No idea if there's a real physical port to go with it or not.
- Some kind of quirk just for the cases where both DDI A and DDI E
are present in VBT. Might be feasible given we've ignored
DDI A in these cases up to now successfully. But feels rather
unsatisfactory, and not very future proof against funny VBTs.
References: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417131728.7705-4-ville.syrjala@linux.intel.com
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.
v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
Now that we have laid the groundwork for YUV420 Enablement
we fill up native_420 field in vdsc_cfg and add appropriate
checks wherever required.
---v2
-adding native_422 field as 0 [Vandita]
-filling in second_line_bpg_offset, second_line_offset_adj
and nsl_bpg_offset in vds_cfg when native_420 is true
---v3
-adding display version check to solve igt issue
--v7
-remove is_pipe_dsc check as its always true for D14 [Jani]
--v10
-keep sink capability check [Jani]
-move from !(x == y || w == z) to x !=y && w != z [Jani]
--v11
-avoid native_420 computation if not gen14 [Uma]
--v12
-fix state mismatch issue of compressed_bpp
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-6-suraj.kandpal@intel.com
Go with DSC only if the given output_format is supported.
v2: Use drm helper to get DSC format support for sink.
v3: remove drm_dp_dsc_compute_bpp.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-3-suraj.kandpal@intel.com
While computing compressed bpp, maximum value of bits_per_pixel is
calculated that can be supported with the given link configuration
for a given mode. Avoid rounding up of this max bits_per_pixel.
Also improve documentation for computing max bits_per_pixel.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223115509.3980226-1-ankit.k.nautiyal@intel.com
We currently have an issue with some BPPs when using DSC.
According to the HW team, the reason is that a single VDSC engine
instance has some BW limitations that must be accounted for.
So, whenever we approach around 90% of the CDCLK, a second VDSC engine
has to be used.
This always means using two slices. However, in our current code,
the amount of slices is calculated independently of whether
we need to enable the second VDSC engine or not.
This leads to some logical issues when, according to the pixel clock needs,
we need to enable the second VDSC engine.
But as we calculated previously that we can only use a single slice,
we can't do that and fail.
So, we need to fix that so that the number of VDSC engines enabled
should depend on the number of slices, and the number of slices
should also depend on BW requirements.
Lastly, we didn't have BPP limitation for ADLP/MTL/DG2 implemented,
which says that DSC output BPPs can only be chosen within the range of 8 to 27
(BSpec 49259).
All of this applied together allows us to fix existing FIFO underruns,
which we have in many DSC tests.
v2: - Replace min with clamp_t(Jani Nikula)
- Fix commit message(Swati Sharma)
- Added "Closes"(Swati Sharma)
BSpec: 49259
HSDES: 18027167222
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8231
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306080401.22552-1-stanislav.lisovskiy@intel.com
Grab the HDR DPCD refresh timeout (time we need to wait after
writing the sourc OUI before the HDR DPCD registers are ready)
from the VBT.
Windows doesn't even seem to have any default value for this,
which is perhaps a bit weird since the VBT value is documented
as TGL+ and I thought the HDR backlight stuff might already be
used on earlier platforms. To play it safe I left the old
hardcoded 30ms default in place. Digging through some internal
stuff that seems to have been a number given by the vendor for
one particularly slow TCON. Although I did see 50ms mentioned
somewhere as well.
Let's also include the value in the debug print to ease
debugging, and toss in the customary connector id+name as well.
The TGL Thinkpad T14 I have sets this to 0 btw. So the delay
is now gone on this machine:
[CONNECTOR:308:eDP-1] Detected Intel HDR backlight interface version 1
[CONNECTOR:308:eDP-1] Using Intel proprietary eDP backlight controls
[CONNECTOR:308:eDP-1] SDR backlight is controlled through PWM
[CONNECTOR:308:eDP-1] Using native PCH PWM for backlight control (controller=0)
[CONNECTOR:308:eDP-1] Using AUX HDR interface for backlight control (range 0..496)
[CONNECTOR:308:eDP-1] Performing OUI wait (0 ms)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220164718.23117-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.
While the usual convention is to pick the earliers name I think
in this case it's more clear to use the later name. Especially
as even the register offset is in the wrong range (0x70000 vs.
0x60000) and thus makes it look like this is per-pipe.
There is one place in gvt that's doing something with TRANSCONF
while iterating with for_each_pipe(). So that might not be doing
the right thing for TRANSCODER_EDP, dunno. Not knowing what it
does I left it as is to avoid breakage.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Switch a lot of the intel_bios_foo() stuff to just accept the
devdata (VBT child device info) directly, instead of taking
detours via vbt.ports[].
Also unify the function naming scheme.
v2: Drop the redundant "encoder" from the dp/hdmi specific functions
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216000425.32216-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
It's confusing to debug backlight issues when one can't
easily even tell what kind of backlight control was
selected. Sprinkle uniform debug messages to all the
backlight setup functions.
Also the one that was already there (ext_pwm) was
using drm_info() for some reason. I don't think that's
warranted so switch it to drm_dbg_kms() as well.
v2: Deal with AUX backlights too (Jani)
Move the VLV/CHV initial pipe debug there too (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215135616.30411-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since we now populate encoder->devdata for all DP capable
platforms we can consult it directly during the eDP
connector init instead of taking a detour via some global
list/array.
Unfortunately we can't quite get rid of
intel_dp_is_port_edp() since it's still used by the higher
level ilk/vlv/chv output setup code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We always have encoder->devdata available on the platforms
that can have LSPCON. So let's start looking there instead
of digging it out from vbt.ports[].
And let's rename the function to fit the common pattern
for these things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
According VDSC spec 1.2a Section 3.8 Options for Slice
implies that 108 lines is an optimal slice height, but any
size can be used as long as vertical active
integer multiple and maximum vertical slice count requirements are met.
Bspec: 49259
--v3
-remove previous fallback code and return slice_height as 2 [Jani]
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214052017.3312044-1-suraj.kandpal@intel.com
It's a bit confusing to have two cached EDIDs in struct intel_connector
with slightly different purposes. Make the distinction a bit clearer by
moving the EDID cached for eDP and LVDS panels at connector init time to
struct intel_panel, and name it fixed_edid. That's what it is, a fixed
EDID for the panels.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.
Since drm_get_edid() calls drm_connector_update_edid_property() while
drm_edid_read*() do not, we need to call drm_edid_connector_update()
separately, in part due to the EDID caching behaviour in HDMI and
DP. Especially DP depends on the details parsed from EDID. (The big
behavioural change conflating EDID reading with parsing and property
update was done in commit 5186421cbf ("drm: Introduce epoch counter to
drm_connector"))
v6: Rebase on drm_edid_connector_add_modes()
v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>)
v4: Call drm_edid_connector_update() after reading HDMI/DP EDID
v3: Don't leak vga switcheroo EDID in LVDS init (Ville)
v2: Don't leak opregion fallback EDID (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
Stash the ELD into the crtc_state and precompute it. This gets
rid of the ugly ELD mutation during intel_audio_codec_enable(),
and opens the door for the state checker.
v2: Make another copy for the acomp hooks (Chaitanya)
Split out the bogus ELD handling change (Jani)
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-5-ville.syrjala@linux.intel.com
Defeature Display Interlace support.
Support for interlace modes is removed from Gen 12 onwards.
Pruning the interlace modes for HDMI for Display >=12.
Bspec: 50490
v2: Add check for both DP and HDMI. (Ville)
Get rid of redundant check for interlace mode in modevalid. (Ville)
v3: Simplify the condition to avoid interlace modes. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105124125.1129653-1-ankit.k.nautiyal@intel.com
Since the DP/HDMI connector do not set connector->doublescan_allowed,
the doublescan modes will get automatically filtered during
drm_helper_probe_single_connector_modes().
Therefore check for double scan modes is not required and is dropped
from modevalid functions for both DP and HDMI.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com
Fix intel_dp_dsc_compute_config, previously timeslots parameter
was used in fact not as a timeslots, but more like a ratio
timeslots/64, which of course didn't have any effect for SST DSC,
but causes now issues for MST DSC.
Secondly we need to calculate pipe_bpp using intel_dp_dsc_compute_bpp
only for SST DSC case, while for MST case it has been calculated
earlier already with intel_dp_dsc_mst_compute_link_config.
Third we also were wrongly determining sink min bpp/max bpp, those
limites should be intersected with our limits to find common
acceptable bpp's, plus on top of that we should align those with
VESA bpps and only then calculate required timeslots amount.
Some MST hubs started to work only after third change was made.
v2: Make kernel test robot happy(claimed there was unitialzed use,
while there is none)
v3: Rename intel_dp_dsc_nearest_vesa_bpp to intel_dp_dsc_nearest_valid_bpp
(Manasi Navare)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123100718.29130-1-stanislav.lisovskiy@intel.com
We might to use that function separately from intel_dp_dsc_compute_config
for DP DSC over MST case, because allocating bandwidth in that
case can be a bit more tricky. So in order to avoid code copy-pasta
lets extract this to separate function and reuse it for both SST
and MST cases.
v2: Removed multiple blank lines
v3: Rename intel_dp_dsc_nearest_vesa_bpp to intel_dp_dsc_nearest_valid_bpp
to reflect its meaning more properly.
(Manasi Navare)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123100551.29080-1-stanislav.lisovskiy@intel.com
Whenever we are not able to get enough timeslots
for required PBN, let's try to allocate those
using DSC, just same way as we do for SST.
v2: Removed intel_dp_mst_dsc_compute_config and refactored
intel_dp_dsc_compute_config to support timeslots as a
parameter(Ville Syrjälä)
v3: - Rebased
- Added a debug to see that we at least try reserving
VCPI slots using DSC, because currently its not visible
from the logs, thus making debugging more tricky.
- Moved timeslots to numerator, where it should be.
v4: - Call drm_dp_mst_atomic_check already during link
config computation, because we need to know already
by this moment if uncompressed amount of VCPI slots
needed can fit, otherwise we need to use DSC.
(thanks to Vinod Govindapillai for pointing this out)
v5: - Put pipe_config->bigjoiner_pipes back to original
condition in intel_dp_dsc_compute_config
(don't remember when I lost it)
v6: - Removed unnecessary drm_dp_mst_atomic_check as it is
now always called in a newly introduced
intel_dp_mst_find_vcpi_slots_for_bpp function
(Vinod Govindapillai)
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101094222.22091-5-stanislav.lisovskiy@intel.com
On ICP-ADP the pins used by the second PPS can be alternatively
muxed to some other function. In that case the second power
sequencer is unusable.
Unfortunately (on my ADL Thinkpad T14 gen3 at least) the
BIOS still likes to enable the VDD on the second PPS (due
to the VBT declaring the second bogus eDP panel) even when
not correctly muxed, so we need to deal with it somehow.
For now let's just initialize the PPS as normal, and then
use the normal eDP probe failure VDD off path to turn it off
(and release the wakeref the PPS init grabbed). The
alternative of just declaring that the platform has a single
PPS doesn't really work since it would cause the second eDP
probe to also try to use the first PPS and thus clobber the
state for the first (real) eDP panel.
Cc: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Lots of ADL machines out there with bogus VBTs that declare
two eDP child devices. In order for those to work we need to
figure out which power sequencer to use before we try the EDID
read. So let's do the panel VBT init early if we can, falling
back to the post-EDID init otherwise.
The post-EDID init panel_type=0xff approach of assuming the
power sequencer should already be enabled doesn't really work
with multiple eDP panels, and currently we just end up using
the same power sequencer for both eDP ports, which at least
confuses the wakeref tracking, and potentially also causes us
to toggle the VDD for the panel when we should not.
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-3-ville.syrjala@linux.intel.com
Bspecs has updated recently to remove the restriction to disable
DDI/Transcoder before setting PHY test pattern. This update is to
address PHY compliance test failures observed on a port with LTTPR.
The issue is that when Transc. is disabled, the main link signals fed
to LTTPR will be dropped invalidating link training, which will affect
the quality of the phy test pattern when the transcoder is enabled again.
v2: Update commit message (Clint)
v3: Add missing Signed-off in v2
v4: Update Bspec and commit message for pre-gen12 (Jani)
Bspec: 50482, 7555
Fixes: 8cdf727119 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123220926.170034-1-khaled.almahallawy@intel.com
Use HAS_DSC(__i915) wrapper containing runtime info of has_dsc
member. Platforms supporting dsc has this flag enabled; no need of
DISPLAY_VER() check.
Also, simplified intel_dsc_source_support() based on above changes.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110093312.13932-1-swati2.sharma@intel.com
Enable the SDP split configuration for DP2.0.
v2: Move the register handling out of compute config function (JaniN)
v3: Patch styling and register access based on platform support (JaniN)
v4: Rebased
v5: Use unconditional clear bit in intel_de_rmw (Jani Nikula)
Bspec: 67768
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121150718.1117628-1-vinod.govindapillai@intel.com
Panel power off delay is the time the panel power needs to remain off
after being switched off, before it can be switched on again.
For the purpose of respecting panel power off delay at driver probe,
assuming the panel was last switched off at driver probe is overly
pessimistic. If the panel was never on, we'd end up waiting for no
reason.
We don't know what has happened before kernel boot, but we can make some
assumptions:
- The panel may have been switched off right before kernel boot by some
pre-os environment.
- After kernel boot, the panel may only be switched off by i915.
- At i915 driver probe, only a previously loaded and removed i915 may
have switched the panel power off.
With these assumptions, we can initialize the last power off time to
kernel boot time, if we also ensure i915 driver remove waits for the
panel power off delay after switching panel power off.
This shaves off the time it takes from kernel boot to i915 probe from
the first panel enable, if (and only if) the panel was not already
enabled at boot.
The encoder destroy hook is pretty much the last place where we can
wait, right after we've ensured the panel power has been switched off,
and before the whole encoder is destroyed.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7417
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116150657.1347504-1-jani.nikula@intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
For cases where DP has HDMI2.1 sink and FRL Link issues are detected,
reset the flag to state FRL trained status before restarting FRL
training.
Fixes: 9488a030ac ("drm/i915: Add support for enabling link status and recovery")
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com
Stop considering VBT's static DRRS support when deciding whether
to use alternate fixed modes or not. It looks like Windows more
or less just uses that to decide whether to automagically switch
refresh rates on AC<->battery changes, or perhaps whether to
even expose a control for that in some UI thing. Either way it
seems happy to always use all EDID modes, and I guess the
DRRS/VRR stuff more or less adjusts how said modes get
actually used.
Let's do the same and just accept all the suitable looking
modes from EDID, whether we have DRRS or VRR.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6323
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since commit a5810f551d ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer considers vrr vs. drrs separately. So no reason to
pass them as separate parameters either.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Do all the checks in intel_dp_initial_fastset_check() instead
of bailing out on the first condition that triggers.
This makes for better debug logs since we see all the reasons
why the full modeset computation is forced.
Also avoid the risk of someone accidentally adding a check
later in the function that would require connectors_changed=true
(ie. no fastset at all), but an earlier check may have already
bailed out with just mode_changed=true (ie. fastset is still
possible).
Pimp the debugs with the encoder id+name while at it.
v2: Call the return variable 'fastset' to convey its meaning
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191314.4252-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In the unlikely case of not finding a fixed mode don't register
the eDP connector. I think there are some places where we'd oops
if we didn't have a fixed mode for eDP so presumable this doesn't
typically happen. But better safe than sorry.
Also pimp the debugs with the encoder id+name. I think dumping
the encoder rather than the connector provides more information
here (eg. to match against the port information in the VBT).
We can also drop the extra check from intel_edp_add_properties().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
All the connectors are zero initialized so no need to clear
the *_allowed flags we don't support. Only leave the ones we want
to set. And while at it switch to booleans instead of ints.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Consolidate the scaling_mode property setup into a single
place.
The one slight complicateion here is that GMCH platforms can't
do the CENTER mode except on the LVDS port. But we can deal with
that by just checking the connector type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pull the eDP backlight setup into its own function. No
reason to pollute intel_edp_init_connector() with all
the mundane details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-7-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Convert dsc debugfs entry from output_bpp to input_bpc. The rationale
is to validate different input bpc across various platforms.
v2: -improved commit message (Jani N)
-styling fixes (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902190658.9459-2-swati2.sharma@intel.com
On BDW+ M/N are double buffered and so we can easily reprogram them
during a fastset. So for eDP panels that support seamless DRRS we
can just change these without a full modeset.
For earlier platforms we'd need to play tricks with M1/N1 vs.
M2/N2 during the fastset to make sure we do the switch atomically.
Not sure the added complexity is worth the hassle, so leave it
alone for now.
The slight downside is that we have to keep the link running at
a link rate capable of supporting the highest refresh rate we
want to use. For the moment we just pick the highest mode the
panel reports and calculate the link based on that. This might
need further refinement (eg. if we run into bandwidth
restrictions)...
v2: Only use the high link rate if the platform really supports
the seamless M/N change uring fastset (ie. bdw+)
v3: Rebase due to HAS_DOUBLE_BUFFERED_M_N()
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-16-ville.syrjala@linux.intel.com
Currently, pic_height of vdsc_cfg structure is being used to calculate
slice_height, before it is set for DP.
So taking out the lines to set pic_height from the helper
intel_dp_dsc_compute_params() to individual encoders, and setting
pic_height, before it is used to calculate slice_height for DP.
Fixes: 5a6d866f8e ("drm/i915: Get slice height before computing rc params")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902103219.1168781-1-ankit.k.nautiyal@intel.com
We have a couple of places that want to make distinction between
double buffered M/N registers vs. the split M1/N1+M2/N2 registers.
Add a helper for that.
v2: Turn into a HAS_ macro (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-4-ville.syrjala@linux.intel.com
This reverts commit e1a84ba850.
Part of a series where patches were modified while applying to resolve
conflicts, leading to further conflicts between drm-misc-next and
drm-intel-next, resulting in build failures in drm-tip. To be applied
again on a baseline with drm-misc-next and drm-intel-next in sync.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Whenever we are not able to get enough timeslots
for required PBN, let's try to allocate those
using DSC, just same way as we do for SST.
v2: Removed intel_dp_mst_dsc_compute_config and refactored
intel_dp_dsc_compute_config to support timeslots as a
parameter(Ville Syrjälä)
v3: - Rebased
- Added a debug to see that we at least try reserving
VCPI slots using DSC, because currently its not visible
from the logs, thus making debugging more tricky.
- Moved timeslots to numerator, where it should be.
v4: - Call drm_dp_mst_atomic_check already during link
config computation, because we need to know already
by this moment if uncompressed amount of VCPI slots
needed can fit, otherwise we need to use DSC.
(thanks to Vinod Govindapillai for pointing this out)
v5: - Put pipe_config->bigjoiner_pipes back to original
condition in intel_dp_dsc_compute_config
(don't remember when I lost it)
v6: - Removed unnecessary drm_dp_mst_atomic_check as it is
now always called in a newly introduced
intel_dp_mst_find_vcpi_slots_for_bpp function
(Vinod Govindapillai)
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905085744.29637-5-stanislav.lisovskiy@intel.com
There's another kind of situation where we could potentially race with
nonblocking modesets and MST, especially if we were to only use the locking
provided by atomic modesetting:
* Display 1 begins as enabled on DP-1 in SST mode
* Display 1 switches to MST mode, exposes one sink in MST mode
* Userspace does non-blocking modeset to disable the SST display
* Userspace does non-blocking modeset to enable the MST display with a
different CRTC, but the SST display hasn't been fully taken down yet
* Execution order between the last two commits isn't guaranteed since they
share no drm resources
We can fix this however, by ensuring that we always pull in the atomic
topology state whenever a connector capable of driving an MST display
performs its atomic check - and then tracking CRTC commits happening on the
SST connector in the MST topology state. So, let's add some simple helpers
for doing that and hook them up in various drivers.
v2:
* Use intel_dp_mst_source_support() to check for MST support in i915, fixes
CI failures
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-14-lyude@redhat.com
From MTL onwards we support DSC 1.2, since there is hardcoding to minor
version 1, update it.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817124516.284456-1-jani.nikula@intel.com
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.
v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com
This reverts commit 73867c8709 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.
Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.
Bisection traced it back to this commit, which makes sense given the
issues.
Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.
Fixes: 73867c8709 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
The eDP BDB block has gained yet another max link rate field.
Let's parse it and consult it during the source rate filtering.
v2: *20 instead of *2 to get the correct units (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602205723.11341-1-ville.syrjala@linux.intel.com
We'll need to know the VBT panel_type before we can determine the
maximum link rate for eDP. To that end move
intel_dp_set_source_rates() & co. to be called after the per-panel
VBT parsing has been done.
intel_dp_mst_encoder_init() depends on the source rates so we'll
have to do it a bit later as well.
v2: Fix the intel_dp_mst_encoder_init() oops
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603165841.15481-1-ville.syrjala@linux.intel.com
The intel_dp_dsc_get_output_bpp() function outputs two lines of
unconditional logs, which was okay when it was called only once. But
now, we also call this function from intel_dp_mode_valid(), which is
in turn called for every mode we need to validate. This causes a lot
of useless noise.
Remove the unconditional prints to avoid spamming the logs. Also
remove one more print that is not unconditional, but is related.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607074433.1202917-1-luca@coelho.fi
It seem that when dealing with VRR capable eDP panels we need
to accept fixed modes with variable vblank length (which is what
VRR varies dynamically). Typically the preferred mode seems to be
a non-VRR more (lowish dotclock/refresh rate + short vblank).
We also have examples where it looks like even the hblank length
is a bit different between the preferred mode vs. VRR mode(s).
So let's just accept anything that has matching hdisp+vdisp+flags.
v2: Document that is_alt_drrs_mode() is a subset of is_alt_vrr_mode() (Jani)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/125
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-4-ville.syrjala@linux.intel.com
Apparently when the VBT panel_type==0xff we should trawl through
the PNPID table and check for a match against the EDID. If a
match is found the index gives us the panel_type.
Tried to match the Windows behaviour here with first looking
for an exact match, and if one isn't found we fall back to
looking for a match w/o the mfg year/week.
v2: Rebase due to vlv_dsi changes
v3: Adjust to .get_panel_type() vfunc
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5545
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-14-ville.syrjala@linux.intel.com
Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.
We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.
Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.
TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.
v2: Note the intel_drrs_frontbuffer_update() change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have the same "override eDP VBT bpp with the current bpp" code
duplciated in two places. Extract it to a helper function.
TODO: Having this in .get_config() is pretty ugly. Should probably
try to move it somewhere else (setup_hw_state()/etc.)...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
v3:
* fix Kconfig dependencies (Javier)
v2:
* reduce HDMI helpers to avoid exporting functions (Jani)
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
DSC is the Display Stream Compression standard for DisplayPort. Move
the DSC code into display/ and split the header into files for protocol
core and DRM helpers. Adapt all users of the code. No functional
changes.
To avoid the proliferation of Kconfig options, DSC is part of DRM's
support for DisplayPort. If necessary, a new option could make DSC an
independent feature.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-6-tzimmermann@suse.de
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
v5: Fixes the regression on older platforms by resetting the VRR
only if HAS_VRR
v6: Remove the checks from driver, add in drm core before
setting VRR prop (Ville)
v7: Move VRR set/reset to set/unset_edid (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 9bc34b4d0f ("drm/i915/display/vrr: Reset VRR capable property on a long hpd")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com
Our YCbCr output is always supposed to be limited range BT.709.
That's what we send with native HDMI. The conn_state->colorspace
stuff is entirely independent of that and is not supposed to alter
the generated output in any way. If we want a way to do that then
we need a new proprty for it.
Make it so that the RGB->YCbCr conversion when performed by the
DPF will match the BT.709 we would transmit with native HDMI.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-12-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
With native HDMI we allow the user to override the mode with
something that may not respect the downstream (sink,dual-mode adapter)
TMDS clock limits. Let's reuse the same logic for DP HDMI DFPs
so that behaviour is more or less uniform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-11-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Currently we only support "4:2:0 also" modes on native HDMI.
Extend that support for DP as well.
With all the HDMI DFP TMDS clock handling sorted out this
is now going to work for both native DP and DP->HDMI
converters. As with native HDMI we first check if RGB
output is possible, and if not we try YCbCr 4:2:0 instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-10-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Rework the HDMI DFP TMDS clock checks to also check at 8bpc.
Previously we only checked the deep color cases. But I suppose
a sink could potentially declare "4:2:0 also" modes that only
actually fit within its own limits when using 4:2:0. Even if
that is too nuts to be real there is no real harm in running
through the full checks for everything.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Consolidate the double pfit call, and reorder things so that
intel_dp_output_format() and intel_dp_compute_link_config() are
back-to-back. They are intimately related, and will need to be
called twice to properly handle the "4:2:0 also" modes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Only seamless DRRS has specific hardware requirements so
we can allow static DRRS on any eDP port.
And we can replace these port checks and whatnot with
a simple check to make sure the transcoder(s) we're
about to use are capable of seamless DRRS.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-11-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_drrs_compute_config() is 100% DP specific. DRRS on other
types of encoders wouldn't do any of these M2/N2 calculations
etc. So let's move this into intel_dp.c so all the DP state
calculation is more concentrated into one place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The intel_panel_add_edid_fixed_mode() vs.
intel_panel_add_edid_downclock_mode() split is not really
helpful. Let's just roll those into a single function so
that the connector init code doesn't have to care too much
about this. All we need to know is whether DRRS should be
allowed or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_drrs_init() is a mostly pointless wrapper around
intel_panel_add_edid_downclock_mode(), get rid of it.
The only really useful thing left in there is the debug
print regarding the DRRS type supported by the connector.
Let's just move that into intel_panel_init().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rather than having the connector init get the fixed mode back from
intel_panel and then feed it straight back into intel_panel_init()
let's just make the fixed mode lookup put the mode directly onto
the panel's fixed_modes list. Avoids the pointless round trip and
opens the door for further enhancements to the fixed mode handling.
v2: Make the debug message correct by using intel_panel_drrs_type() (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Debug log when DSC is going to be used, and why, instead of
unconditionally logging the rarely used debug option setting, which
might not have any bearing on whether DSC is going to be used or not.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330093019.4150386-1-jani.nikula@intel.com
Rename intel_panel_vbt_fixed_mode() to
intel_panel_vbt_lfp_fixed_mode() to be more descriptive.
We'll have another VBT fixed mode function soon and we
don't want to confuse the two.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use intel_panel_preferred_fixed_mode() for all the orientation
quirk setup and compute_is_dual_link_lvds()). All of these
happen after intel_panel_init() so the panel fixed_mode list
is already in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pull the drm_connector_set_panel_orientation_with_quirk()
into intel_edp_add_properties() to match how the DSI encoders
do it. Less clutter in intel_edp_init_connector() overall.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
HSW+ platforms are able to send out HDR Metadata SDP DIP
packet as GMP. Hence, extending the support for HDR on DP
encoders for the same.
v2: Limited to non eDP ports on hsw/bdw and removed it for
lspcon as it is done separately (suggested by Ville)
v3: Added helper and limited eDP restriction to port A (Ville)
v4: Dropped some redundant checks (Ville)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5389
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324120438.1876445-1-uma.shankar@intel.com
Commit 13ea6db2cf ("drm/i915/edp: Ignore short pulse when panel
powered off") completely broke short pulse handling for eDP as it is
usually generated by sink when it is displaying image and there is
some error or status that source needs to handle.
When power panel is enabled, this state is enough to power aux
transactions and VDD override is disabled, so intel_pps_have_power()
is always returning false causing short pulses to be ignored.
So here better naming this function that intends to check if aux
lines are powered to avoid the endless cycle mentioned in the commit
being fixed and fixing the check for what it is intended.
v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation
Fixes: 13ea6db2cf ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-1-jose.souza@intel.com
There are a couple of cases where we essentially just want to
get/check the preferred fixed mode of the panel. Add a small
helper for that to abstract away the direct pointer lookup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Abstract away the details on where we store the fixed/downclock
modes, and also how we select them. Will be useful for static
DRRS (aka. allowing the user to select the refresh rate for the
panel).
We pass in the user requested mode to intel_panel_fixed_mode()
so that in the future it may try to match the refresh rate.
And intel_panel_downclock_mode() gets passed the adjusted_mode
we actually chose to use so that it may find a suitable lower
resresh rate variant.
v2: Hook it up for all encoders
s/fixed_mode/adjusted_mode/ in intel_panel_downclock_mode() (Jani)
Elaborate on the choice or arguments for the functions (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since we now have the bigjoiner_pipes bitmask the boolean
is redundant. Get rid of it.
Also, populating bigjoiner_pipes already during
encoder->compute_config() allows us to use it much earlier
during the state calculation as well. The initial aim is
to use it in intel_crtc_compute_config().
v2: Move the hweight(bigjoiner_pipes) stuff to a later patch
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-12-ville.syrjala@linux.intel.com
Remove the local enabledisable() implementation and adopt the
str_enable_disable() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-2-lucas.demarchi@intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
Often using pipes is more convenient than crtc indices.
Convert the current for_each_intel_crtc_mask() to take a
pipe mask instead of a crtc index mask, and rename it to
for_each_intel_crtc_in_pipe_mask() to make it clear what
it does.
The current users of for_each_intel_crtc_mask() don't really
care which kind of mask we use, but for other uses a pipe
mask if better.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
-----BEGIN PGP SIGNATURE-----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=IMtm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
Currently we just use all the hdmi_deep_color_possible() stuff
to compute whether deep color is possible, and leave the 8bpc
case to do its own thing. That doesn't mesh super well with 4:2:0
handling because we might end up going for 8bpc RGB without
considering that it's essentially illegal and we could instead
go for a legal 4:2:0 config.
So let's run through all the clock checks even for 8bpc first.
If we've fully exhausted all options only then do we re-run
the computation for 8bpc while ignoring the downstream TMDS
clock limits. This will guarantee that if there's a config
that respects all limits we will find it, and if there is not
we still allow the user to override the mode manually.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015133921.4609-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Seems odd that we clear all event status indicators if we've only
handled some. Only clear the ones we've handled.
v2: ack DOWN_REP and UP_REQ only if they were set in esi (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120110102.3116218-1-jani.nikula@intel.com
Only specific event status indicators caused the link status to be
acked. Be sure to ack the link status change event.
Arguably we should track which bits to actually clear in ESI instead of
the wholesale approach.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-6-jani.nikula@intel.com
The link service irq vector in DPCD 0x2005 contains the link status
changed bit to indicate the status should be checked. Only read and
check the link status when requested by the sink.
This also reduces the confusion around the buffer size for the combined
ESI and link status. Alas, we still need to take into account that all
link status helpers expect a buffer of DP_LINK_STATUS_SIZE (6) while the
link status in ESI only has 4 bytes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-5-jani.nikula@intel.com
For whatever reason, the ESI link service irq vector was missing from
the debug output. Add the missing byte, clean up the debug message, and
do the logging right after reading the data.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-3-jani.nikula@intel.com
Smaller functions make the thing easier to read. Debug log failures to
ack.
Note: Looks like we have the retry loop simply because of hysterical
raisins, dating back to the original DP MST enabling. Keep it, though I
have no idea why we have it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112110319.1172110-2-jani.nikula@intel.com
The ACPI OpRegion Mailbox #5 ASLE extension may contain an EDID to be
used for the embedded display. Add support for using it via by adding
the EDID to the list of available modes on the connector, and use it for
eDP when available.
If a panel's EDID is broken, there may be an override EDID set in the
ACPI OpRegion mailbox #5. Use it if available.
Fixes the GPD Win Max display.
Based on original patch series by: Jani Nikula <jani.nikula@intel.com>
https://patchwork.kernel.org/project/intel-gfx/patch/20200828061941.17051-1-jani.nikula@intel.com/
Changes:
- EDID is copied and validated with drm_edid_is_valid
- EDID is now only used as a fallback.
- squashed the two patches
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-2-anisse@astier.eu
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3
w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0
HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem
St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz
iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+
VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz
1m2tVNY=
=7wRd
-----END PGP SIGNATURE-----
Merge v5.16-rc5 into drm-next
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add display/intel_display_trace.[ch] for defining display
tracepoints. The main goal is to reduce cross-includes between gem and
display. It would be possible split up tracing even further, but that
would lead to more boilerplate.
We end up having to include intel_crtc.h in a few places because it was
pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and
that's no longer the case.
There should be no changes to tracepoints.
v3:
- Rebase
v2:
- Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris)
- Remove useless comments (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com
drm/i915 feature pull for v5.17:
Features and functionality:
- Implement per-lane DP drive settings for ICL+ (Ville)
- Enable runtime pm autosuspend by default (Tilak Tangudu)
- ADL-P DSI support (Vandita)
- Add support for pipe C and D DMC firmware (Anusha)
- Implement (near)atomic gamma LUT updates via vblank workers (Ville)
- Split plane updates to noarm+arm phases (Ville)
- Remove the CCS FB stride restrictions on ADL-P (Imre)
- Add PSR selective fetch support for biplanar formats (Jouni)
- Add support for display audio codec keepalive (Kai)
- VRR platform support for display 11 (Manasi)
Refactoring and cleanups:
- FBC refactoring and cleanups preparing for multiple FBC instances (Ville)
- PCH modeset refactoring, move to its own file (Ville)
- Refactor and simplify handling of modifiers (Imre)
- PXP cleanups (Ville)
- Display header and include refactoring (Jani)
- Some register macro cleanups (Ville)
- Refactor DP HDMI DFP limit code (Ville)
Fixes:
- Disable DSB usage for now due to incorrect gamma LUT updates (Ville)
- Check async flip state of every crtc and plane only once (José)
- Fix DPT FB suspend/resume (Imre)
- Fix black screen on reboot due to disabled DP++ TMDS output buffers (Ville)
- Don't request GMBUS to generate irqs when called while irqs are off (Ville)
- Fix type1 DVI DP dual mode adapter heuristics for modern platforms (Ville)
- Fix fix integer overflow in 128b/132b data rate calculation (Jani)
- Fix bigjoiner state readout (Ville)
- Build fix for non-x86 (Siva)
- PSR fixes (José, Jouni, Ville)
- Disable ADL-P underrun recovery (José)
- Fix DP link parameter usage before valid DPCD (Imre)
- VRR vblank and frame counter fixes (Ville)
- Fix fastsets on TypeC ports following a non-blocking modeset (Imre)
- Compiler warning fixes (Nathan Chancellor)
- Fix DSI HS mode commands (William Tseng)
- Error return fixes (Dan Carpenter)
- Update memory bandwidth calculations (Radhakrishna)
- Implement WM0 cursor WA for DG2 (Stan)
- Fix DSI Double pixelclock on read-back for dual-link panels (Hans de Goede)
- HDMI 2.1 PCON FRL configuration fixes (Ankit)
Merges:
- DP link training delay helpers, via topic branch (Jani)
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v909it0t.fsf@intel.com
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
(cherry picked from commit c7c90b0b84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF/AjYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hkIAJ6sFDbvb4M4LMwf
Slh2NVL9o5sLMBDzVwnVlyMSKDbMn1WBKreGssaLgZjGDc74lxsdSmw5l9MZm0JN
xlq95Q6XFiuu+0qDHPWwfDz3JFO4TqW2ZLLPWk9NnkNbRXqccSrlVRi1RpgE1t3/
NUtS8CQLu6A2BYMc6mkk3aV6IwSNKOkWbM5eBHSvU4j8B6lLbNQop0AfO/wyY1xB
U6LiVE1RpN/b7Yv+75ITtNzuHzVIBx6305FvSnOlKbMKKvIClt96Vd2OeuoEkK+6
wGU8JraB1+fc0GckAhynNrjWQWdvi0MAhFWWEJxjS20OGcV1rXDduNfkVNauO1Zn
+dNyJ3s=
=g9fz
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15' into drm-next
I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.
Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently we reset the whole PCON linkConfig DPCD to set the TMDS mode.
This also resets the Source control bit and HDMI link enable bit and
goes to autonomous mode of operation, which is seen to spoil the PCONs
internal state.
This patch avoids resetting the PCON link config register and sets only
the source control bit, with FRL Enable bit set to 0 (TMDS mode) in the
configuration DPCD. It then enables the HDMI Link Enable bit.
v2: Removed the redundant resetting of the bits as the buffer is already
initialized to 0. (Uma)
Updated comments and commit message.
v3: Rebase
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110072947.171659-3-ankit.k.nautiyal@intel.com
Currently the HDMI2.1 PCON's frl link config DPCD registers are
reset and configured even if they are already configured.
Also the HDMI Link Mode does not settle to FRL MODE immediately after
HDMI Link Status is active.
This patch:
-Checks if the PCON is already configured for FRL.
-Include HDMI Link Mode in wait for loop along with HDMI Link status DPCD.
v2: Rebase
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110072947.171659-2-ankit.k.nautiyal@intel.com
When link-status changes, send a hotplug uevent which contains the
connector ID. That way, user-space can more easily figure out that
only this connector has been updated.
Changes in v4: avoid sending two uevents (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-7-contact@emersion.fr
The PPS SDP is fed into the transcoder whereas the DSC
block is (or at least can be) per pipe. Let's split these
into two distinct operations in an effort to untagle the
bigjoiner mess where we have two pipes feeding a single
transcoder.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-7-ville.syrjala@linux.intel.com
The intermediate value 1000000 * 10 * 9671 overflows 32 bits, so force
promotion to a bigger type.
From the logs:
[drm:intel_dp_compute_config [i915]] DP link rate required 3657063 available -580783288
v2: Use mul_u32_u32() (Ville)
Fixes: 48efd014f0 ("drm/i915/dp: add max data rate calculation for UHBR rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026093407.11381-1-jani.nikula@intel.com
(cherry picked from commit bf0d608b55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-4-imre.deak@intel.com
(cherry picked from commit 9ad87de473)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The intermediate value 1000000 * 10 * 9671 overflows 32 bits, so force
promotion to a bigger type.
From the logs:
[drm:intel_dp_compute_config [i915]] DP link rate required 3657063 available -580783288
v2: Use mul_u32_u32() (Ville)
Fixes: 48efd014f0 ("drm/i915/dp: add max data rate calculation for UHBR rates")
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026093407.11381-1-jani.nikula@intel.com
Reading out the DP encoders' DPCD during booting or resume is only
required for enabled encoders: such encoders may be modesetted during
the initial commit and the link training this involves depends on an
initialized DPCD. For DDI encoders reading out the DPCD is skipped, do
the same on pre-DDI platforms.
Atm, the first DPCD readout without a sink connected - which is a likely
scneario if the encoder is disabled - leaves intel_dp->num_common_rates
at 0, which resulted in
intel_dp_sync_state()->intel_dp_max_common_rate()
in a
intel_dp->common_rates[-1]
access. This by definition results in an undefined behaviour, though to
my best knowledge in all HW/compiler configurations it actually results
in accessing the array item type value preceding the array. In this
case the preceding value happens to be intel_dp->num_common_rates,
which is 0, so this issue - by luck - didn't cause a user visible
problem.
Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN
builds leads to a kernel BUG() (which revealed this problem for us),
hence CC:stable.
A related problem in case the encoder is enabled but the sink is not
connected or the DPCD readout fails is fixed by the next patch.
v2: Amend the commit message describing the root cause of the
CONFIG_UBSAN BUG().
Fixes: a532cde31d ("drm/i915/tc: Fix TypeC port init/resume time sanitization")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com
(cherry picked from commit 4ec5ffc341)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add an assert that lookups from the intel_dp->common_rates[] array
are always valid.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-7-imre.deak@intel.com
If the DPCD sink rate values read from the sink are invalid, the
driver will sanitize this in intel_dp_set_common_rates(), by setting a
default 162000 link rate in common rates and printing a WARN().
WARN()s should only be triggered by bugs in the code and not by external
factors like the above (an invalid DPCD injected maliciously or read from a
buggy monitor). So fixup the invalid DPCD sink rate values already and print
an error in this case (since it's still a user visible problem).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-6-imre.deak@intel.com
Print an error if the DPCD sink max lane count is invalid and fix it up.
While at it also add an assert that the link max lane count (derived
from intel_dp_max_common_lane_count(), potentially reduced by the LT
fallback logic) value is also valid.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-5-imre.deak@intel.com
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-4-imre.deak@intel.com
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
Reading out the DP encoders' DPCD during booting or resume is only
required for enabled encoders: such encoders may be modesetted during
the initial commit and the link training this involves depends on an
initialized DPCD. For DDI encoders reading out the DPCD is skipped, do
the same on pre-DDI platforms.
Atm, the first DPCD readout without a sink connected - which is a likely
scneario if the encoder is disabled - leaves intel_dp->num_common_rates
at 0, which resulted in
intel_dp_sync_state()->intel_dp_max_common_rate()
in a
intel_dp->common_rates[-1]
access. This by definition results in an undefined behaviour, though to
my best knowledge in all HW/compiler configurations it actually results
in accessing the array item type value preceding the array. In this
case the preceding value happens to be intel_dp->num_common_rates,
which is 0, so this issue - by luck - didn't cause a user visible
problem.
Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN
builds leads to a kernel BUG() (which revealed this problem for us),
hence CC:stable.
A related problem in case the encoder is enabled but the sink is not
connected or the DPCD readout fails is fixed by the next patch.
v2: Amend the commit message describing the root cause of the
CONFIG_UBSAN BUG().
Fixes: a532cde31d ("drm/i915/tc: Fix TypeC port init/resume time sanitization")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: Mat Jonczyk <mat.jonczyk@o2.pl>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com
The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].
Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com
Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com
Limit the supported UHBR rates based on the repeater support, if there
are repeaters.
This should be done in DP helper level, but that requires an overhaul of
the LTTPR handling, as the max rate is not enough to represent how
128b/132b rates may be masked along the way.
Curiously, the spec says:
* Shall be cleared to 00h when operating in 8b/10b Link Layer.
* Each LTTPR on the way back to the DPTX shall clear the bits that do
not correspond to the LTTPR's current bit rate.
It's rather vague if we can reliably use the field at this time due to
the wording "operating" and "current". But it would seem bizarre to have
to wait until trying to operate a 128b/132b link layer at a certain bit
rate to figure this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007105727.18439-1-jani.nikula@intel.com
Currently we clear the leftover vswing/preemphasis values only
at the start of link training. That means the initial vswing
programming performed during modeset is going to use stale values
left over from the previous link training sequence, and then at
the start of link training we're going to reset the levels back
to 0. Seems much better to make sure we start with level 0 from
the get go.
Additionally if LTTPRs are present the leftover vswing/preemphasis
values are those of the last link in the chain, so not the values
that our PHY is even using after a successful link training sequence.
So let's make sure everything is cleared up before we start
programming anything.
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930134310.31669-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Stop using HBR2/3 support as a proxy for TPS3/4 support.
The two are no longer 1:1 in the hardware, arguably they
never were due to HSW ULX which does support TPS3 while
being limited to HBR1.
In more recent times GLK gained support for TPS4 while
being limited to HBR2. And on CNL+ some ports support
HBR3 while others are limited to HBR2, but all ports
support TPS4.
v2: s/INTEL_GEN/DISPLAY_VER/
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929162404.6717-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Let's introduce a compute_config() helper for fixed mode panels.
For now all it does is the fixed_mode->adjusted_mode copy.
Note that with sDVO we have to ask the external encoder chip
to spit out our actual display timings for us, so the fixed_mode
to adjusted_mode copy done by intel_panel_compute_config() is
redundant, but we still want to use it to do other checks for us
later. We'll be fine so long as we only call it before
intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode
with the timings from the encoder.
v2: Use intel_panel_compute_config() with sDVO
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
PSR always had a requirement to only be enabled if there is active
planes but not following that never caused any issues.
But that changes in Alderlake-P, leaving PSR enabled without
active planes causes transcoder/port underruns.
Similar behavior was fixed during the pipe disable sequence by
commit 84030adb9e ("drm/i915/display: Disable audio, DRRS and PSR before planes").
intel_dp_compute_psr_vsc_sdp() had to move from
intel_psr_enable_locked() to intel_psr_compute_config() because we
need to be able to disable/enable PSR from atomic states without
connector and encoder state.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-3-jose.souza@intel.com
Ville Syrjälä
Linus Torvalds
Jani Nikula
Jouni Högander
Ankit Nautiyal
Imre Deak
Khaled Almahallawy
Dave Airlie
Daniel Vetter
Swati Sharma
Animesh Manna
Stanislav Lisovskiy
Chaitanya Kumar Borah
Bjorn Andersson
Thomas Zimmermann
Luca Coelho
Vinod Govindapillai
Dnyaneshwar Bhadane
Wayne Lin
Maarten Lankhorst
Nikita Zhandarovich
Mika Kahola
Suraj Kandpal
Andrzej Hajda
Lyude Paul
Vandita Kulkarni
Jason A. Donenfeld
Manasi Navare
Uma Shankar
José Roberto de Souza
Lucas De Marchi
Rodrigo Vivi
Matt Roper
Anisse Astier
Simon Ser