{planes,vrr}_{enabling,disabling}() are supposed to indicate
whether the specific hardware feature is supposed to be enabling
or disabling. That can only makes sense if the pipe is active
overall. So check for that before we go poking at the hardware.
I think we're semi-safe currently on due to:
- intel_pre_plane_update() doesn't get called when the pipe
was not-active prior to the commit, but this is actually a bug.
This saves vrr_disabling(), and vrr_enabling() is called from
deeper down where we have already checked hw.active.
- active_planes mirrors the crtc's hw.active
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
(cherry picked from commit bc53c4d56e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7 ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.
Fixes: 3991999732 ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
(cherry picked from commit e0d5ce11ed)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There's no real reason why we'd need a full modeset for audio
changes. So let's allow audio to be toggled during fastset.
In case the ELD changes while has_audio isn't changing state
we force both audio disable and enable so the new ELD gets
propagated to the audio driver.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-12-ville.syrjala@linux.intel.com
We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.
Fixes: 3991999732 ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
{planes,vrr}_{enabling,disabling}() are supposed to indicate
whether the specific hardware feature is supposed to be enabling
or disabling. That can only makes sense if the pipe is active
overall. So check for that before we go poking at the hardware.
I think we're semi-safe currently on due to:
- intel_pre_plane_update() doesn't get called when the pipe
was not-active prior to the commit, but this is actually a bug.
This saves vrr_disabling(), and vrr_enabling() is called from
deeper down where we have already checked hw.active.
- active_planes mirrors the crtc's hw.active
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
Reuse intel_dp_max_data_rate() and intel_dp_effective_data_rate() in
intel_link_compute_m_n(), instead of open-coding the equivalent. Note
the kbit/sec -> kByte/sec unit change in the M/N values, but this not
reducing the precision, as the link rate value is based anyway on a less
precise 10 kbit/sec value.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-12-imre.deak@intel.com
The link M/N ratio is the data rate / link symbol clock rate, fix things
up accordingly. On DP 1.4 this ratio was correct as the link symbol clock
rate in that case matched the link data rate (in bytes/sec units, the
symbol size being 8 bits), however it wasn't correct for UHBR rates
where the symbol size is 32 bits.
Kudos to Arun noticing in Bspec the incorrect use of link data rate in
the ratio's N value.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-7-imre.deak@intel.com
Considering what the functions do, intel_dpll.c is a more suitable
location, and lets us make some functions static while at it.
This also means intel_display.c no longer does any DPIO access.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-1-jani.nikula@intel.com
MTL+ supports fractional compressed bits_per_pixel, with precision of
1/16. This compressed bpp is stored in U6.4 format.
Accommodate this precision while computing m_n values.
v1:
Replace the computation of 'data_clock' with 'data_clock =
DIV_ROUND_UP(data_clock, 16).' (Sui Jingfeng).
v2:
Rebase and pass bits_per_pixel in U6.4 format.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-4-ankit.k.nautiyal@intel.com
DSC parameter bits_per_pixel is stored in U6.4 format.
The 4 bits represent the fractional part of the bpp.
Currently we use compressed_bpp member of dsc structure to store
only the integral part of the bits_per_pixel.
To store the full bits_per_pixel along with the fractional part,
compressed_bpp is changed to store bpp in U6.4 formats. Intergral
part is retrieved by simply right shifting the member compressed_bpp by 4.
v2:
-Use to_bpp_int, to_bpp_frac_dec, to_bpp_x16 helpers while dealing
with compressed bpp. (Suraj)
-Fix comment styling. (Suraj)
v3:
-Add separate file for 6.4 fixed point helper(Jani, Nikula)
-Add comment for magic values(Suraj)
v4:
-Fix checkpatch warnings caused by renaming(Suraj)
v5:
-Rebase.
-Use existing helpers for conversion of bpp_int to bpp_x16
and vice versa.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-3-ankit.k.nautiyal@intel.com
Perform all the intel_pre_update_crtc() stuff for all pipes first,
and only then do the intel_update_crtc() vblank evasion stuff for
every pipe back to back. This should make it more likely that
the plane updates from multiple pipes happen on the same frame
(assuming the pipes are running in sync, eg. due to bigjoiner
or port sync).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Split intel_update_crtc() into two parts such that the first
part performs all the non-vblank evasion preparatory stuff,
and the second part just does the vblank evasion stuff.
For now we just call these back to back so that there is
no funcitonal change.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Since commit 7de5b6b546 ("drm/i915: Don't flag both full
modeset and fastset at the same time")
intel_crtc_needs_fastset() and intel_crtc_needs_modeset() have
been mutually exclusive. Drop the redundant check.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907122541.32261-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
At the moment modesetting a stream CRTC will fail if the stream's BW
along with the current BW of all the other streams on the same MST link
is above the total BW of the MST link. Make the BW sharing more dynamic
by trying to reduce the link bpp of one or more streams on the MST link
in this case.
When selecting a stream to reduce the BW for, take into account which
link segment in the MST topology ran out of BW and which streams go
through this link segment. For instance with A,B,C streams in the same
MST topology A and B may share the BW of a link segment downstream of a
branch device, stream C not downstream of the branch device, hence not
affecting this BW. If this link segment's BW runs out one or both of
stream A/B's BW will be reduced until their total BW is within limits.
While reducing the link bpp for a given stream DSC may need to be
enabled for it, which requires FEC on the whole MST link. Check for this
condition and recompute the state for all streams taking the FEC
overhead into account (on 8b/10b links).
v2:
- Rebase on s/min_bpp_pipes/min_bpp_reached_pipes/ change.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-29-imre.deak@intel.com
Enabling / disabling DSC decompression in the branch device downstream
of the source may reset the whole branch device. To avoid this while the
streams are still active, force a modeset on all CRTC/ports connected to
this branch device.
v2:
- Check the CRTC state for each connector in the topology, instead of
the CRTC being checked for a modeset requirement. (Ville)
- Add DocBook for the new function.
v3:
- Rebased on a change not to use
intel_modeset_pipes_in_mask_early().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-8-imre.deak@intel.com
Factor out a helper to clear the pipe update flags, used by a follow-up
patch to modeset an MST topology.
v2:
- Move the intel_crtc_needs_modeset() check to the callers. (Ville)
v3 (Ville):
- Rename clear_pipe_update_flags_on_modeset_crtc() to
intel_crtc_flag_modeset().
- Also set crtc_state->uapi.mode_changed in the function.
- Leave out the unrelated change to use
intel_modeset_pipes_in_mask_early().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-7-imre.deak@intel.com
A follow-up MST patch will need to specify the total BW allocation
overhead, prepare for that here by passing the amount of overhead
to intel_link_compute_m_n(), keeping the existing behavior.
v2:
- Fix passing the correct crtc_state->fec_enable param in
intel_dp_mst_compute_link_config() /
intel_dp_dsc_mst_compute_link_config().
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-13-imre.deak@intel.com
We are preparing for Xe driver. Xe driver doesn't have i915_sw_fence
implementation. Lets drop i915_sw_fence usage from display code and
use dma_fence interfaces directly.
For this purpose stack dma fences from related objects into new plane
state. Drm_gem_plane_helper_prepare_fb can be used for fences in new
fb. Separate local implementation is used for Stacking fences from old fb
into new plane state. Then wait for these stacked fences during atomic
commit. There is no be need for separate GPU reset handling in
intel_atomic_commit_fence_wait as the fences are signaled when GPU hang is
detected and GPU is being reset.
v4:
- Drop to_new_plane_state suffix from add_dma_resv_fences
- Use dma_resv_usage_rw(false) (DMA_RESV_USAGE_WRITE)
v3:
- Rename add_fences and it's parameters
- Remove signaled check
- Remove waiting old_plane_state fences
v2:
- Add fences from old fb into new_plane_state->uapi.fence rather than
into old_plane_state->uapi.fence
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031084557.1181630-1-jouni.hogander@intel.com
The DP modeset sequence asks us to disable TRANSCONF before clearing
the FECSTALL_DIS_DPTSTREAM_DPTTG bit, although we are still asked
to wait for the transcoder to stop only after both steps have
been done.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018154123.5479-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
With MTL adding PICA between the port and the real phy, the path
add for DG2 stopped being followed and newer platforms are simply using
the older path for TC phys. LNL is no different than MTL in this aspect,
so just add it to the mess. In future the phy and port designation and
deciding if it's TC should better be cleaned up.
To make it just a bit better, also change intel_phy_is_snps() to show
this is DG2-only.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026184045.1015655-3-lucas.demarchi@intel.com
By default fastboot is enabled on all Display 9+ platforms and disabled
on older platforms. Its not necessary to retain this as a module
parameter.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926091157.635438-1-arun.r.murthy@intel.com
intel_psr_pre_plane_update() operates on a per-crtc level, whereas
intel_psr_post_plane_update() operates on the whole atomic commit,
for no real reason that I can see. Adjust intel_psr_post_plane_update()
to match the intel_psr_pre_plane_update() approach.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Recompute the state of all CRTCs on an FDI link during a modeset that
may be affected by the modeset of other CRTCs on the same link. This
ensures that each CRTC on the link maximizes its BW use (after another
CRTC is disabled).
In practice this means recomputing pipe B's config on IVB if pipe C gets
disabled.
v2:
- Add the change recomputing affected CRTC states in a separate patch.
(Ville)
v3: (Ville)
- Constify old and new crtc states.
- Check for fused off pipe C.
- Fix new vs. old crtc state mixup.
- Drop check for pipe C's enabled state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.
For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.
Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.
v2:
- Don't assume that a CRTC is already in the atomic state, while
reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
intel_sdvo_compute_config(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
At the moment a modeset fails if the config computation of a pipe can't
fit its required BW to the available link BW even though the limitation
may be resolved by reducing the BW requirement of other pipes.
To improve the above this patch adds helper functions checking the
overall BW limits after all CRTC states have been computed. If the check
fails the maximum link bpp for a selected pipe will be reduced and all
the CRTC states will be recomputed until either the overall BW limit
check passes, or further bpp reduction is not possible (because all
pipes/encoders sharing the link BW reached their minimum link bpp).
Atm, the MST encoder allocates twice the required BW for YUV420 format
streams. A follow-up patchset will fix that, add a code comment about
this.
This change prepares for upcoming patches enabling the above BW
management on FDI and MST links.
v2:
- Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and
intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani)
v3:
- Add the helper functions in a separate patch. (Ville)
- Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville)
- Return -ENOSPC instead of -EINVAL to userspace in case of a link BW
limit failure.
v4:
- Make intel_atomic_check_config() static.
v5: (Ville)
- Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes
and intel_link_bw_reset_pipe_limit_to_min() to
intel_link_bw_set_min_bpp_for_pipe().
- Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp().
- Add FIXME: comment about MST encoder's YUV420 BW allocation and
tracking the link bpp limit accordingly.
v6:
- Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville)
- WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in
intel_link_bw_set_bpp_limit_for_pipe(). (Ville)
- Rename intel_link_bw_set_min_bpp_for_pipe() to
intel_link_bw_set_bpp_limit_for_pipe() and
intel_link_bw_limits::min_bpp_reached_pipes to
bpp_limit_reached_pipes. (Ville)
- Remove unused header includes.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-10-imre.deak@intel.com
Factor out intel_atomic_check_config() to check and compute all the CRTC
states. This will be used by a follow up patch to recompute/check the
state until required by BW limitations between CRTCs.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-9-imre.deak@intel.com
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to
clarify when the function can be called (vs.
intel_modeset_pipes_in_mask_early()).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of
pipes, used in a follow-up patch.
As opposed to intel_modeset_all_pipes() which modesets only the active
pipes - others don't requiring programming the HW - modeset all enabled
pipes in intel_modeset_pipes_in_mask_early() which may need to recompute
their state even if they are not active (that is in the DPMS off state).
While at it add DocBook descriptions for the two exported functions.
v2:
- Add a flag controlling if active planes are force updated as well.
- Add DockBook descriptions.
v3:
- For clarity use _early/_late suffixes for the exported functions
instead of the update_active_planes parameter. (Ville)
v4:
- In intel_modeset_pipes_in_mask_early() update only the crtc
flags relevant to the early phase. (Ville)
- Rename intel_modeset_all_pipes() in a separate patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com
Loading LUTs with the DSB outside of vblank doesn't really
work due to the palette anti-collision logic. Apparently the
DSB register writes don't get stalled like CPU mmio writes
do and instead we end up corrupting the LUT entries. Disabling
the anti-collision logic would allow us to successfully load
the LUT outside of vblank, but presumably that risks the LUT
reads from the scanout (temporarily) getting corrupted data
from the LUT instead.
The anti-collision logic isn't active during vblank so that
is when we can successfully load the LUT with the DSB. That is
what we want to do anyway to avoid tearing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-13-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).
The panel itself must support VRR for this to work, and
only TGL+ has the double buffred TRANS_VTOTAL.VTOTAL that
we need to make the switch properly. The double buffer
latching happens at the start of transcoders undelayed
vblank. The other thing that we change is
TRANS_VBLANK.VBLANK_END but the hardware entirely ignores
that in DP mode. But I decided to keep writing it anyway
just to avoid more special cases in readout/state check.
v2: Document that TRANS_VBLANK.VBLANK_END is ignored by
the hardware
v3: Reconcile with VRR fastset
Adjust update_lrr flag behaviour
Make sure timings stay within VRR range
v4: Fix up update_m_n vs. update_lrr rebase fail (Manasi)
Drop DOUBLE_BUFFER_VACTIVE define as it's not needed (Manasi)
TODO: Hook LRR into the automatic DRRS downclocking stuff?
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915103800.14218-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
We should be able to change any of the VRR parameters
during fastsets as long as we toggle VRR off at the start
and then back on at the end. The transcoder will be running
in non-VRR mode during the transition.
Co-developed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-11-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Make life less confusing by making sure VRR is disabled whenever
we do any drastic changes to the display timings, such as seamless
M/N changes.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Don't perform a seamless M/N update if the values aren't actually
changing. This avoids doing extra shenanigans during vblank evasion
needlessly.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-7-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
With the dsc config being readout and filled in crtc_state add
macros and use them to compare current and previous PPS param in
DSC.
--v2
-Remove version check [Jani]
-Remove dupe macro for dsc pipe compare and use the existing ones
[Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828054300.560559-9-suraj.kandpal@intel.com
Most of the IS_METEORLAKE checks in the display code shouldn't actually
be tied to MTL as a platform, but rather to the Xe_LPD+ display IP
(which is used in MTL, but may show up again in future platforms). In
cases where we're trying to match that specific IP, use a version check
against IP_VER(14, 0). For cases where we're just handling new behavior
introduced by this IP (but which may also be inherited by future IP as
well), use a ver >= 14 check.
The one exception here is the stolen memory workaround Wa_13010847436
(which is mislabelled as "Wa_22018444074" in the code). That's truly a
MTL-specific issue rather than being tied to any of the IP blocks, so
leaving the condition as IS_METEORLAKE is correct there.
v2:
- cdclk check should be >=, not >. (Gustavo)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-19-matthew.d.roper@intel.com
All production DG2 cards have display stepping C0 or later. We can drop
Wa_14013215631 (only applies to pre-C0) and make Wa_14010547955
unconditional (applies to everything B0 and beyond). Also drop the
now-unused IS_DG2_DISPLAY_STEP macro.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-9-matthew.d.roper@intel.com
Try to deal with duplicate child devices for the same DDI port
by attempting to initialize them in VBT defined order The first
on to succeed for a specific DDI port will be the one we use.
We'll also get rid of i915->display.vbt.ports[] here as any conflicts
will now be handled at encoder registration time rather than during
VBT parsing. Note that intel_bios_encoder_data_lookup() still remaims
for pre-DDI DP/HDMI ports as those don't (at least yet) use VBT
driven initialization.
TODO: DSI dual link handling is sketchy at best
v2: Leave intel_bios_encoder_port() to the encoder callback (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
DC states are disabled / re-enabled around each modeset, which may lead
to a needless off->on->off toggling of the DC_off power well. This has
some overhead as toggling DC states involves running a DMC firmware
handler and also running a periodic firmware handler while DC states are
enabled. The limit of when DC states have a benefit is at 30 FPS (using
DC3co) and below 30 FPS (using DC5/6), where the firmware can actually
disable clocks / power off power wells. Accordingly delay powering off
the DC_off powerwell (which re-enables DC states) by 17 ms at the end of
a modeset to avoid the above overhead at or above 60 FPS.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-4-imre.deak@intel.com
Make HSW/BDW use port_mask for output probing as well.
To achieve that the strap checks are moved into
intel_ddi_init() itself. Or should we move them to the
runtime port_mask init instead? Maybe not since the hardware
is still there, just not connected to anything.
v2: Account for DDI-E in strap detection
Keep to the old CRT->DDI init order
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-8-ville.syrjala@linux.intel.com
Instead of listing every platform's possible DDI outputs
in intel_setup_outputs() just loop over the new port_mask
to achieve the same thing.
HSW/BDW were left as is since they still look at the straps
as well.
DSI is still a mess. For now just check for the relevant
platforms explicitly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-7-ville.syrjala@linux.intel.com
Sprinkle some asserts to catch any mishaps in the port_mask
vs. output init.
For DDI/DP/HDMI/SDVO I decided that we want to bail out for
an invalid port since those are the encoder types where
we might want consider driving the whole thing from the VBT
child device list, and bogus VBTs could be a real issue
(if for no other reason than the i915.vbt_firmware).
For DVO and HSW/BDW CRT port I just threw the assert in
there for good measure.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-5-ville.syrjala@linux.intel.com
In order to avoid flush_scheduled_work() usage, add a dedicated
workqueue in the drm_i915_private structure. In this way, we don't
need to use the system queue anymore.
This change is mostly mechanical and based on Tetsuo's original
patch[1].
v6 by Jani:
- Also create unordered_wq for mock device
Link: https://patchwork.freedesktop.org/series/114608/ [1]
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com
MTL introduces a new way to instruct the PUnit with
power and bandwidth requirements of DE. Add the functionality
to program the registers and handle waits using interrupts.
The current wait time for timeouts is programmed for 10 msecs to
factor in the worst case scenarios. Changes made to use REG_BIT
for a register that we touched(GEN8_DE_MISC_IER _MMIO).
Wa_14016740474 is added which applies to Xe_LPD+ display
v2: checkpatch warning fixes, simplify program pmdemand part
v3: update to dbufs and pipes values to pmdemand register(stan)
Removed the macro usage in update_pmdemand_values()
v4: move the pmdemand_pre_plane_update before cdclk update
pmdemand_needs_update included cdclk params comparisons
pmdemand_state NULL check (Gustavo)
pmdemand.o in sorted order in the makefile (Jani)
update pmdemand misc irq handler loop (Gustavo)
active phys bitmask and programming correction (Gustavo)
v5: simplify pmdemand_state structure
simplify methods to find active phys and max port clock
Timeout in case of previou pmdemand task pending (Gustavo)
v6: rebasing
updates to max_ddiclk calculations (Gustavo)
updates to active_phys count method (Gustavo)
v7: use two separate loop to iterate throug old and new
crtc states to calculate the active phys (Gustavo)
v8: use uniform function names (Gustavo)
v9: For phys change iterate through connectors (Imre)
Look for change in phys for pmdemand update (Gustavo, Imre)
Some more stlying changes (Imre)
Update pmdemand state during HW readout/sanitize (Imre)
v10: Fix CI checkpatch warnings
v11: use correct pmdemand object pointer during hw readout,
simplify the check for phys need update (Gustavo)
v12: Handle possible non serialize cases (Imre)
Initialise also pmdemand params HW readout (Imre)
Update active phys mask during sanitize calls (Imre)
Check TC/encoder changes to limit connector update (Imre)
v13: Check display version before accessing pmdemand functions
v14: Move is_serialized to intel_global_state.c
simplify update params and other stlying issues (Imre)
Bspec: 66451, 64636, 64602, 64603
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> #v11
Reviewed-by: Imre Deak <imre.deak@intel.com>
[RK: Fixed minor typo in one of the comments. s/qclck_gc/qclk_gv/]
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606201032.347449-1-vinod.govindapillai@intel.com
Prepare for re-enabling -Wunused-but-set-variable.
for_each_new_intel_crtc_in_state() requires passing in a struct
intel_crtc_state pointer, which it uses, but in a few places this leads
to warning about unused but set variables. Annotate them with
__maybe_unused.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb041f426bc3d76ef7a0ea906f99367cbf439b1a.1685119007.git.jani.nikula@intel.com
Prepare for re-enabling -Wunused-but-set-variable.
for_each_new_intel_plane_in_state() requires passing in a struct
intel_plane_state pointer, which it uses, but in many places this leads
to warning about unused but set variables. Annotate them with
__maybe_unused.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/438ff3b257b7f85ecca5750ae8687336faee0a79.1685119007.git.jani.nikula@intel.com
VLV has a so called "wide gamut color correction" unit (WGC).
What it is is a 3x3 matrix similar to the later CHV CGM
CSC, with less precisions/range. In fact CHV also has the WGC
but using it there doesn't really make sense when you have the
superior CGM CSC around.
Hook up the necessary stuff to expose the WGC as the CTM
crtc property.
One additional crazy idea that came to mind would be to use
the WGC as an output CSC on CHV for YCbCr output. But it
would be incompatible with the legacy LUT usage. In fact
since the WGC lacks post-offsets we'd probably have to
use the legacy LUT to do that final part of the RGB->YCbCr
conversion. Sounds doable, but perhaps not worth the hassle.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Clang warns:
drivers/gpu/drm/i915/display/intel_display.c:6012:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
case I915_FORMAT_MOD_X_TILED:
^
drivers/gpu/drm/i915/display/intel_display.c:6012:3: note: insert 'break;' to avoid fall-through
case I915_FORMAT_MOD_X_TILED:
^
break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 937859485a ("drm/i915: Support Async Flip on Linear buffers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/202305241902.UvHtMoxa-lkp@intel.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYv68V3ewK0Qj-syQj7qX-hQr0H1MFL=QFNuDoE_J2Zu-g@mail.gmail.com/
Reported-by: Tom Rix <trix@redhat.com>
Closes: https://lore.kernel.org/all/20230523125116.1669057-1-trix@redhat.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524-intel_async_flip_check_hw-implicit-fallthrough-v1-1-83de89e376a1@kernel.org
Move the runtime info specific to display into display-specific
structures as has already been done with the constant display info.
v2:
- Rename __runtime to __runtime_defaults for more clarity on the
purpose. (Andrzej)
- Move introduction of DISPLAY_INFO() to previous patch. (Andrzej)
- Drop NO_DISPLAY macro. (Andrzej)
v3:
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-4-matthew.d.roper@intel.com
Starting from Gen12 Async Flip is supported on linear buffers.
This patch enables support for async on linear buffer.
UseCase: In Hybrid graphics, for hardware unsupported pixel formats it
will be converted to linear memory and then composed.
v2: Added use case
v3: Added FIXME for ICL indicating the restrictions
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906041806.4095575-1-arun.r.murthy@intel.com
The "fastset mismatch" debug logging has been slightly confusing,
leading people to believe some error happened. Change it to the more
informative "fastset requirement not met", and add a final message about
this leading to full modeset.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516094406.2675307-1-jani.nikula@intel.com
During HW readout/sanitization CRTCs can be disabled only if they don't
have an attached encoder (and so the encoder disable hooks don't need to
be called). An upcoming patch will need to disable CRTCs also with an
attached encoder, so add support for this.
For bigjoiner configs the encoder disabling hooks require the slave CRTC
states, so add these too to the atomic state. Since the connector atomic
state is already up-to-date when the CRTC is disabled the connector
state needs to be updated (reset) after the CRTC is disabled, make this
so. Follow the proper order of disabling first all bigjoiner slaves,
then any port synced CRTC slaves followed by the CRTC originally
requested to be disabled.
v2:
- Fix calculating the bigjoiner_masters mask in a port sync config,
(Ville)
- Keep _noatomic suffix in intel_crtc_disable_noatomic(). (Ville)
- Rebase on full CRTC state reset in this patchset, not requiring
resetting the bigjoiner state separately and (instead) resetting
the full atomic CRTC and related global state after all linked
pipes got disabled.
- Disable portsync slaves before a portsync master.
- Disable a portsync master if a linked portsync slave is disabled.
v3: (Ville)
- Use s/u32/u8 for transcoder and pipe masks.
- Use is_power_of_2() instead of hweight()==1.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-8-imre.deak@intel.com
For a bigjoiner configuration display->crtc_disable() will be called
first for the slave CRTCs and then for the master CRTC. However slave
CRTCs will be actually disabled only after the master CRTC is disabled
(from the encoder disable hooks called with the master CRTC state).
Hence the slave PIPEDMCs can be disabled only after the master CRTC is
disabled, make this so.
intel_encoders_post_pll_disable() must be called only for the master
CRTC, as for the other two encoder disable hooks. While at it fix this
up as well. This didn't cause a problem, since
intel_encoders_post_pll_disable() will call the corresponding hook only
for an encoder/connector connected to the given CRTC, however slave
CRTCs will have no associated encoder/connector.
Fixes: 3af2ff0840 ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com
Add i915 parameter to I915_STATE_WARN() and use device based logging.
Done using cocci + hand edited where there was no i915 local variable
ready.
v2: avoid null deref in verify_connector_state()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
Define and use the bitmasks for the x/y components
of the ilk+ panel filter window pos/size registers.
Note that we stick to the full 16 bit mask even though
the actual hardware limits are lower (and somewhat
platform dependent). BDW is actually limited to
13 bits horizontal and 12 bits vertical, with the high
bits being hardwired to zero. HSW should have the same
limits as BDW. And pre-HSW should be limited to 12bits
in both directions as that's already the limit of the
transcoder timing registers. Curiously on HSW and earlier
platforms all 16 bits can actually be set, but presumably
the hardware ignores the high bits.
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add register writes to enable powering up Type-C subsystem i.e. TCSS.
For MeteorLake we need to request TCSS to power up and check the TCSS
power state after 500 us.
In addition, for PICA we need to set/clear the Type-C PHY ownnership
bit when Type-C device is connected/disconnected.
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-11-mika.kahola@intel.com
The only way to truly clean up intel_display.[ch] is to move stuff out
of them until there's absolutely nothing left.
Start moving the high level display driver entry points, i.e. functions
called from top level driver code only, to a new file, which we'll call
intel_display_driver.c. The intention is that there's no low-level
display code or details here. This is an in-between layer.
Initially, move intel_display_driver_register() and
intel_display_driver_unregister() there.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e42cc037881a4c6042948a34bd4a9698f9e8487c.1681465222.git.jani.nikula@intel.com
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200602.6037-2-ville.syrjala@linux.intel.com
Fixes: 3a47ae201e ("drm/i915/display: Make WARN* drm specific where encoder ptr is available")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Initialization sequences and C10 phy are in place to be able to enable
the first 2 ports of MTL. The other ports use C20 phy that still need
to be properly added. Enable the first ports for now, keeping a TODO
comment about the others.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-10-radhakrishna.sripada@intel.com
If we have to force the hardware to go through a full modeset
due to eg. cdclk reprogramming, we need to preserve
crtc_state->inherited for all crtcs that have not otherwise
gone through the whole compute_config() stuff after connectors
have been detected.
Otherwise eg. cdclk induced modeset glk_force_audio_cdclk()
will clear the inherited flag, and thus the first real commit
coming from userspace later on will not be forced through
the full .compute_config() path and so eg. audio state may
not get properly recomputed.
But instead of adding all kinds of ad-hoc crtc_state->inherited
preservation hacks all over, let's change things so that we
only clear it for the crtcs directly included in userspace/client
initiated commits.
Should be far less fragile since now we just need to remember
to flag the internal commits, and not worry about where new
crtcs might get pulled in.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5260
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328122357.1697-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Move VRR enabling/disabling into a place where it also works
for fastsets.
With this we always start the transcoder up in non-VRR mode.
Granted we already did that but for a very short period of
time. But now that we might end up doing a bit more with the
transcoder in non-VRR mode it seems prudent to also update
the active timings as the transcoder changes its operating
mode.
crtc_state->vrr.enable still tracks whether VRR is actually
enabled or not, but now we configure all the other VRR timing
registers whenever VRR is possible (whether we actually enable
it or not). crtc_state->vrr.flipline can now serve as our
"is VRR possible" bit of state.
I decided to leave the MSA timing ignore bit set all the time
whether VRR is actually enabled or not. If the sink can figure
out the timings with that information when VRR is active then
surely it can also do it when VRR is inactive.
v2: Protect intel_vrr_set_transcoder_timings() with HAS_VRR()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321135615.27338-1-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
In order to move VRR enable/disable to a place where it's also
applicable to fastsets we need to be prepared to configure
the pipe into non-VRR mode initially, and then later switch
to VRR mode. To that end allow the active timings to be configured
in non-VRR mode temporarily even when the crtc_state says we're
going to be using VRR.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320203352.19515-5-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Read out the pipe/output csc matrices on ilk+ and stash the results
(in the hardware specific format) into the appropriate place
in the crtc state.
Note that on skl/glk/icl the pipe csc unit suffers from an issue
where *reads* of the coefficient/offset registers also disarm
the double buffer update (if currently armed via CSC_MODE write).
So it's rather important that the readout only happens after the
csc registers have been latched. Fortunately the state checker
only runs after the start of vblank where the latching happens.
And on skl/glk the DMC + CSC register read has the potential to
corrupt the latched CSC register values, so let's add a comment
reminding us that the DC states should remain off until the
readout has been completed.
TODO: maybe we could somehow check to make sure PSR has in fact
latched the new register values already, and that DC states
have been off all along?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Observe that intel_pm.[ch] is now purely about clock gating, so rename
them to intel_clock_gating.[ch]. Rename the functions to
intel_clock_gating_*() to follow coding conventions.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-1-jani.nikula@intel.com
The encoder update_prepare()/complete() hooks were added to hold a
TC port link reference for all outputs in the atomic state around the
whole modeset enable sequence - thus locking the ports' TC mode - and
set the TBT/DP-alt PLL type corresponding to the current TC mode.
Since nothing depends on the PLL selection before/after then encoder's
pre_pll_enable/post_pll_disable hooks are called, the above steps can be
moved to these hooks, so do that and remove the
update_prepare()/complete() hooks.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com
Bspec requires disabling the DPLLs on TC ports before disconnecting the
port's PHY. Add a post_pll_disable encoder hook and move the call to
disconnect the port's PHY from the post_disable hook to the new hook.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com
The spec requires disabling the PLL on TC ports before disconnecting the
port's PHY. Prepare for that by moving the PLL disabling to the CRTC
disable hook, while disconnecting the PHY will be moved to the
post_pll_disable() encoder hook in the next patch.
v2: Move the call from intel_crtc_disable_noatomic() as well.
Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com
Add i915.enable_dpt modparam to allow disabling the DPT
usage in hardware via the chicken bit. Useful when debugging
potential DPT issues.
Quickly smoke tested on ADL.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Keeping DC states enabled is incompatible with the _noarm()/_arm()
split we use for writing pipe/plane registers. When DC5 and PSR
are enabled, all pipe/plane registers effectively become self-arming
on account of DC5 exit arming the update, and PSR exit latching it.
What probably saves us most of the time is that (with PIPE_MISC[21]=0)
all pipe register writes themselves trigger PSR exit, and then
we don't re-enter PSR until the idle frame count has elapsed.
So it may be that the PSR exit happens already before we've
updated the state too much.
Also the PSR1 panel (at least on this KBL) seems to discard the first
frame we trasmit, presumably still scanning out from its internal
framebuffer at that point. So only the second frame we transmit is
actually visible. But I suppose that could also be panel specific
behaviour. I haven't checked out how other PSR panels behave, nor
did I bother to check what the eDP spec has to say about this.
And since this really is all about DC states, let's switch from
the MODESET domain to the DC_OFF domain. Functionally they are
100% identical. We should probably remove the MODESET domain...
And for good measure let's toss in an assert to the place where
we do the _noarm() register writes to make sure DC states are
in fact off.
v2: Just use intel_display_power_is_enabled() (Imre)
Cc: <stable@vger.kernel.org> #v5.17+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Fixes: d13dde4495 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Fixes: f8a005eb89 ("drm/i915: Optimize icl+ universal plane programming")
Fixes: 890b6ec4a5 ("drm/i915: Split skl+ plane update into noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
We're going to need stuff after the color management
register latching has happened. Add a corresponding hook.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Move intel_crtc_update_active_timings() into intel_vblank.c
where it more properly belongs.
Also do the s/dev_priv/i915/ modernization rename while at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-3-ville.syrjala@linux.intel.com
Add some (probably overkill) locking to protect the vblank
timestamping constants updates during seamless M/N fastsets.
As everything should be naturally aligned I think the individual
pieces should probably end up updating atomically enough. So this
is only really meant to guarantee everyone sees a consistent whole.
All the drm_vblank.c usage is covered by vblank_time_lock,
and uncore.lock will take care of __intel_get_crtc_scanline()
that can also be called from outside the core vblank functionality.
Currently only crtc_clock and framedur_ns can change, but in
the future might fastset also across eg. vtotal/vblank_end
changes, so let's just grab the locks across the whole thing.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-2-ville.syrjala@linux.intel.com
Move the display debugfs registration later, after initializing steps
for opregion/acpi/audio. These latter ones don't depend on the debugfs
entries, OTOH some debugfs entries may depend on the initialized state.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-3-imre.deak@intel.com
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We just wrote the EDP transcoder's VTOTAL register a few lines
earlier, so instead of reading it back out again let's just
generate the same value for the transocder B/C register.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The DSI code has some local hacks to program TRANS_VBLANK on
TGL+ (ICL DSI transcoders didn't have this register). That
will not work when we need to start using the delayed vblank
(for DSB purposes). Too lazy to figure out what the is going
on there, so just sprinkle FIXMEs in the hopes someone else
will spot them eventually.
v2: Only TRANS_{HBLANK,SET_CONTEXT_LATENCY} still no not
exist for DSI transcoders, only TRANS_VBLANK
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-12-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
On TGL VBLANK.VBLANK_START was the mechanism by which we can
delay the pipe's internal vblank in relation to the transcoder's
vblank. On ADL+ that no longer does anything. Instead we must
now use the new TRANS_SET_CONTEXT_LATENCY register. Program it
accordingly.
And since VBLANK.VBLANK_START is no longer used by the hardware
on ADL+ let's just zero it out to make it stand out in register
dumps. Seeing the zeroed value should hopefully remind people
to check the other register instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-11-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of the transcoder timing registers using
REG_GENMASK() & co. For ease of maintenance let's just define
the bitmasks with the full 16bit width (also used by the
current hand rolled stuff) even though not all bits are actually
used. None of the unsued bits have ever contained anything.
Jani spotted that the CRT load detection code did use narrower
bitmasks, so that is now going to change. But that is fine
since any garbage in the high bits would have been caught by
the state checker that always used the full 16bit masks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.
While the usual convention is to pick the earliers name I think
in this case it's more clear to use the later name. Especially
as even the register offset is in the wrong range (0x70000 vs.
0x60000) and thus makes it look like this is per-pipe.
There is one place in gvt that's doing something with TRANSCONF
while iterating with for_each_pipe(). So that might not be doing
the right thing for TRANSCODER_EDP, dunno. Not knowing what it
does I left it as is to avoid breakage.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Name the CPU transcoder timing registers TRANS_FOO rather than
just FOO. This is the modern name, after the pipe/transcoder split
happened. Makes it a bit more obvious whether you pass in a pipe or
a transcoder.
PIPESRC is a bit special as it's a pipe register, even though it
lives in the transcoder registers range (0x60000 instead of 0x70000).
And BCLRPAT I suppose is a transcoder register (since it has something
to do with the timing generator), but it doesn't even exist after gen4
so I left it to use the only name it ever had in bspec.
And while at it let's pass in the correct enum in few more
places why don't we. Although in all those places the distinction
doesn't matter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Do the ELD hexdumps only up to the last differing byte.
The rest is typically all zeroes anyway so not much point
in dumping it.
Couldn't find anything for memcmp_diff_len() so
rolled my own.
v2: Use semantics and function name suggested by Jani
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215150129.13288-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move sanitize_watermarks() to i9xx_wm.[ch] and rename as
ilk_wm_sanitize(). The slightly unfortunate downside is having to expose
intel_atomic_check() from intel_display.c, but this declutters
intel_display.c nicely.
v2:
- Move to i9xx_wm.[ch] instead of intel_wm.[ch] (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215141910.433043-1-jani.nikula@intel.com
Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold
generic and pre-SKL watermark code, respectively. SKL+ watermark code
has already been split out to skl_watermark.[ch].
Use the _wm.[ch] naming for brevity; we may want to rename
skl_watermark.[ch] later accordingly.
Add new intel_wm_init() to call either skl_wm_init() or
i9xx_wm_init(i915) depending on the platform, the latter comprising of
the remains of intel_init_pm().
Sprinkle in some minor checkpatch fixes while moving the code.
v2:
- Rebase
- Fix copyright year
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddf04a07a37f0368b3fef85d4ebb924082fec6cd.1676317696.git.jani.nikula@intel.com
Determining whether the display engine is present on a platform happens
only in intel_device_info_runtime_init(). Initializing the display power
functionality depends on this condition, so move
intel_power_domains_init() later after the runtime init function has
been called.
The next patch fixing platforms without display, depends on this patch.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-3-imre.deak@intel.com
Add the MST topology for a CRTC to the atomic state if the driver
needs to force a modeset on the CRTC after the encoder compute config
functions are called.
Later the MST encoder's disable hook also adds the state, but that isn't
guaranteed to work (since in that hook getting the state may fail, which
can't be handled there). This should fix that, while a later patch fixes
the use of the MST state in the disable hook.
v2: Add missing forward struct declartions, caught by hdrtest.
v3: Factor out intel_dp_mst_add_topology_state_for_connector() used
later in the patchset.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v2
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-1-imre.deak@intel.com
Current implementation of async flip w/a relies on assumption that
previous atomic commit contains valid information if async_flip is still
enabled on the plane. It is incorrect. If previous commit did not modify
the plane its state->uapi.async_flip can be false. As a result DMAR/PIPE
errors can be observed:
i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080
i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:02.0] fault addr 0x0 [fault reason 0x06] PTE Read access is not set
v2: update async_flip_planes in more reliable places (Ville)
v3: reset async_flip_planes and do_async_flip in more scenarios (Ville)
v4: move all resets to plane loops (Ville)
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127153003.2225111-1-andrzej.hajda@intel.com
Have the state checker validate the ELD. For now we'll
just dump it out as a hex buffer on a mismatch, maybe
someone will get inspired to decode it properly at some
point...
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-11-ville.syrjala@linux.intel.com
Make sure that PIPEDMCs are enabled whenever the corresponding pipe is
enabled.
This is required at least by the latest ADLP v2.18 firmware, which adds
a new handler enabled by default and running whenever the pipe is
enabled at the vertical referesh rate.
Bspec: 50344, 67620
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102183324.862279-1-imre.deak@intel.com
Move the display related members to the struct drm_i915_private display
sub-struct. Put them under "state", as they are related to storing
values that aren't readable from the hardware, to appease the state
checker.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117143946.2426043-3-jani.nikula@intel.com
Since the color management code is the only user of the DSB
at the moment move the DSB prepare/cleanup there too. The
code has to anyway make decisions on whether to use the DSB
or not (and how to use it). Also we'll need a place where we
actually generate the DSB command buffer ahead of time rather
than the current situation where it gets generated too late
during the mmio programming of the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123152638.20622-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We have full readout now for all platforms (sans the icl+
multi-segment readout hw fail), so hook up the LUT state
checker for everyone.
We add a new vfunc for this since different platforms need
to handle the details a bit differently.
The implementation is rather repetitive in places. Probably
we want to think of a more declarative approach for the
LUT precision/etc. stuff in the future...
Note that we're currently missing readout for c8_planes, so
we'll have to skip the state check in that case.
v2: Fix readout for C8 use cases
v3: Skip C8 entirely due to lack of c8_planes readout
Add ilk_has_pre_csc_lut() helper and use other such helpers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114153732.11773-16-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
We now have all the code necessary for gamma/degamma readout on
ivb/hsw. Plug it all in. As with bdw+ the cooked {pre,post}_csc_lut
make this trivial even in split gamma mode.
Note that on HSW if IPS is enabled the hardware will hang if
you try to access the LUT in split gamma mode. Thus we need to
reorder the LUT readout vs. IPS enable steps.
v2: deal with {pre,post}_csc_lut
split gamma is no longer a problem
handle HSW IPS w/a
v3: use ilk_has_post_csc_lut() helper
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114153732.11773-12-ville.syrjala@linux.intel.com
bigjoiner_pipes() doesn't consider that:
- RKL only has three pipes
- some pipes may be fused off
This means that intel_atomic_check_bigjoiner() won't reject
all configurations that would need a non-existent pipe.
Instead we just keep on rolling witout actually having
reserved the slave pipe we need.
It's possible that we don't outright explode anywhere due to
this since eg. for_each_intel_crtc_in_pipe_mask() will only
walk the crtcs we've registered even though the passed in
pipe_mask asks for more of them. But clearly the thing won't
do what is expected of it when the required pipes are not
present.
Fix the problem by consulting the device info pipe_mask already
in bigjoiner_pipes().
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Since the current size of intel_display_power_domain_set struct is
close to 1kB, it's better to use preallocated memory for it. The only
user of the intel_display_power_get/put_in_set() allocating the struct
on stack is hsw_get_pipe_config(), so we can avoid potential stack
overallocations by moving the struct here to the preallocated
intel_crtc struct (hsw_get_pipe_config() is non-reentrant wrt. each
CRTC).
This patch replaces
https://lore.kernel.org/intel-gfx/20221107170917.3566758-5-imre.deak@intel.com/T/#md3f6cdf17fcd
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-3-imre.deak@intel.com
Move display global state member under drm_i915_private display
sub-struct.
Prefer adding anonymous sub-structs even for single members that aren't
our own structs.
Remove a nearby stale comment while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-3-jani.nikula@intel.com
The HTI or HDPORT handling is sprinkled around. Centralize to one place.
Add a note about how subtle the mapping from HDPORT_STATE register to
dpll mask actually is.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109144209.3624739-1-jani.nikula@intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
Prefer our own intel_crtc_needs_modeset() wrapper to
drm_atomic_crtc_needs_modeset() whenever we are dealing
with the intel_ types instead of drm_ types. Makes things
a bit neater in general.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031214037.1636-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmNcHTsACgkQ+mJfZA7r
E8pXrwgAgYH8DQu+/C+gu4cB7wOQC+flrCAinCRaxE88q7iWDoQoY+XFdBLq9vEM
QWNAmnUG53+z1rW1+EAVoIDhRz7yYnsxScLj/FijJl52hNNP3QkZP4iZuAMJyQy2
NYDOQyzvLBGmOIDgz+4YBtqk28eiX8x0+sYSA/JuLU5lL1zXFeXt2pFt2kcAnT/S
Fe1MajA3TxLO9lAhnEzEUD3X/xLz5D/91BQS+7OL8n24Hxb9kBZ0N1UbwDOCDegc
NEGpQmJTJnkGTAEQ8tlqnvMgHUbGmm3OEImamfC2QGvIdolF8zax9baNKoUts7BZ
CaBDK2NK//W+sYl52Tig4pCv36bPdw==
=91XL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
Since we now have a place (pre_csc_lut) to stuff a purely
internal LUT we can replace glk_load_degamma_lut_linear()
with such a thing and just rely on the normal
glk_load_degamma_lut() to load it as well.
drm_mode_config_cleanup() will clean this up for us.
v2: Pass on the error pointer
Drop a hint about this into the state dump
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-5-ville.syrjala@linux.intel.com
Since we now have the extra step from hw.(de)gamma_lut into
{pre,post}_csc_lut let's make sure we didn't forget to assign
them appropriately. Ie. basically making sure intel_color_check()
was called when necessary (and that it did its job suitable well).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-4-ville.syrjala@linux.intel.com
Add an extra remapping step between the logical state of the LUTs
(hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs.
the actual state of the LUTs programmed into the hardware.
With this we should be finally able finish the (de)gamma
readout/state checker support for the remaining platforms
(ilk-skl) where the same hardware LUT can be positioned
either before or after the pipe CSC unit. Where we position
it depends on factors such as presence of the logical degamma
LUT, RGB vs. YCbCr output, full vs. limited RGB quantization
range.
Without the extra remapping step the state readout doesn't
really know whether the LUT read from the hardware is the
degamma or gamma LUT, and so we is unable to accurately store
it into our crtc state. With the remapping step we know
exactly where to put it given the order of the LUT vs. CSC
in the hardware state.
Only the initial hw->uapi state readout done during driver
load/resume still has the problem of not really knowing
what to do with the LUT(s). But we can just assume 1:1
mapping there and let subsequent commits fix things up.
Another benefit is that we now have a place for purely
internal LUTs, without complicating the bigjoiner uapi->hw
copy logic. This should prove useful for streamlining
glk degamma LUT handling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-3-ville.syrjala@linux.intel.com
Be consistent in whether we flag a full modeset or a
fastset for the pipe. intel_modeset_all_pipes() would
seem to be the only codepath not getting this right.
The other case is when we flag the fastset initially,
currently we just clear the mode_changed flag and set
the update_pipe flag. But we could still have
connectors_changed==true or active_changed==true forcing
a full modeset anyway. So check for that after clearing
the mode_changed flag.
And let's add a WARN to make sure we did get it right.
v2: Deal with {connectors,active}_changed
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-4-ville.syrjala@linux.intel.com
Replace the somewhat obscure crtc_state.update_pipe checks
with a more descriptive thing. Also nicely matches the
intel_crtc_needs_modeset() counterpart for full modesets.
v2: Handle one more case in the fbc code
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-2-ville.syrjala@linux.intel.com
On BDW+ we have just the one set of DP M/N registers. The
values we write into said registers depends on whether we
want DRRS to be in high or low gear. This causes issues
for the state checker which currently has to assume either
set of M/N (high or low refresh rate) values may appear there.
That sort of works for M/N itself, but all other values
derived from the M/N (dotclock, pixel rate) are not handled
correctly, leading to potential for state checker mismatches.
Let's avoid all those problems by simply keeping DRRS in
high gear until the state checker has done its hardware
state readout.
Note that hitting this issue presumable became very hard
after commit 1b333c679a ("drm/i915: Do DRRS disable/enable
during pre/post_plane_update()") since the state check would
have to laze about for one full second (delay used by
intel_drrs_schedule_work()) to see the low refresh rate.
But it is still theoretically possible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020120706.25728-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We've excluded gmch platforms from writing the final watermarks
for any disabled pipe. IIRC the reason was perhaps some lingering
issue with the watermark merging across the pipes. But I can't
really see any reason for this anymore, so let's unify this behaviour.
The main benefit being more consistency in register dumps when
we don't have stale watermarks hanging around in the registers.
Functionally there should be no difference as the hardware just
ignore all of it when the pipe is disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Make sure modes with crazy big dotclocks are rejected early,
so as to not cause problems for subsequent code via integer
overflows and whatnot.
These would eventually be rejected in intel_crtc_compute_pipe_mode()
but that is now too late as we do the clock computations a bit
earlier than that. And we don't want to just reorder the two since
we still want to check the final computed dotclock against the
hardware limit to make sure we didn't end up above the limit due
to rounding/etc.
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927182455.3422-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit df2f59c585)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Make sure modes with crazy big dotclocks are rejected early,
so as to not cause problems for subsequent code via integer
overflows and whatnot.
These would eventually be rejected in intel_crtc_compute_pipe_mode()
but that is now too late as we do the clock computations a bit
earlier than that. And we don't want to just reorder the two since
we still want to check the final computed dotclock against the
hardware limit to make sure we didn't end up above the limit due
to rounding/etc.
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927182455.3422-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Most places that deal with output types already use BIT()
but a few places still use manual shifts. Convert the
stragglers over to BIT().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm/i915 feature pull #2 for v6.1:
Features and functionality:
- More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha)
- Allow seamless M/N changes on eDP panels that support it (Ville)
- Switch DSC debugfs from output bpp to input bpc (Swati)
Refactoring and cleanups:
- Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville)
- Plenty of VBT definition and parsing updates and cleanups (Ville)
- Extract SKL watermark code to a separate file, and clean up (Ville)
- Clean up IPC interfaces and debugfs (Jani)
- Continue moving display data under drm_i915_private display sub-struct (Jani)
- Display quirk handling refactoring and abstractions (Jani)
- Stop using implicit dev_priv in gmbus registers (Jani)
- BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani)
- Use drm_dp_phy_name() for logging (Jani)
- Use REG_BIT() macros for CDCLK registers (Stan)
- Move display and media IP versions to runtime info (Radhakrishna)
Fixes:
- Fix DP MST suspend to avoid use-after-free (Andrzej)
- Fix HPD suspend to avoid use-after-free for fbdev (Andrzej)
- Fix various PSR issues regarding selective update and damage clips (Jouni)
- Fix runtime pm wakerefs for driver remove and release (Mitul Golani)
- Fix conditions for filtering fixed modes for panels (Ville)
- Fix TV encoder clock computation (Ville)
- Fix dvo mode_valid hook return type (Nathan Huckleberry)
Merges:
- Backmerge drm-next to sync the DP MST atomic changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7vfr064.fsf@intel.com
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
In Display version 14, Transcoder Chicken Registers have updated address.
This patch performs checks to use the right register when required.
v2: Omit display version check in i915_reg.h(Jani)
v3:
- Remove extra whitespace introduced
- Fix reg definitions for MTL_CHICKEN_TRANS(MattR)
Bspec: 34387, 50054
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913183341.908028-6-radhakrishna.sripada@intel.com
UAPI Changes:
- Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709"
The intent of Wa_14015141709 was to inform us that userspace can no
longer control object-level preemption as it has on past platforms
(i.e., by twiddling register bit CS_CHICKEN1[0]). The description of
the workaround in the spec wasn't terribly well-written, and when we
requested clarification from the hardware teams we were told that on the
kernel side we should also probably stop setting
FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the
hardware to honor the settings in per-context register CS_CHICKEN1. It
turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a
mistake; even though CS_CHICKEN1[0] is non-operational and useless to
userspace, there are other bits in the register that do still work and
might need to be adjusted by userspace in the future (e.g., to implement
other workarounds that show up). If we don't set
FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would
not take effect.
Even more details at:
https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html
Driver Changes:
- Align GuC/HuC firmware versioning scheme to kernel practices (John)
- Fix#6639: h264 hardware video decoding broken in 5.19 on Intel(R)
Celeron(R) N3060 (Nirmoy)
- Meteorlake (MTL) enabling (Matt R)
- GuC SLPC improvements (Vinay, Rodrigo)
- Add thread execution tuning setting for ATS-M (Matt R)
- Don't start PXP without mei_pxp bind (Juston)
- Remove leftover verbose debug logging from GuC error capture (John)
- Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris)
- Add DG2 Wa_16014892111 (Matt R)
- Rename ggtt_view as gtt_view (Niranjana)
- Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A)
- Don't try to disable host RPS when this was never enabled. (Rodrigo)
- Clear stalled GuC CT request after a reset (Daniele)
- Remove runtime info printing from GuC time stamp logging (Jani)
- Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna)
- Make GuC log sizes runtime configurable (John)
- Selftest improvements (Daniele, Matt B, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
drm-misc-next for v6.1-rc1:
[airlied - fix sun4i_tv build]
UAPI Changes:
- Hide unregistered connectors from GETCONNECTOR ioctl.
- drm/virtio no longer advertises LINEAR modifier, as it doesn't work.
-
Cross-subsystem Changes:
- Fix GPF in udmabuf failure path.
Core Changes:
- Rework TTM placement to use intersect/compatible functions.
- Drop legacy DP-MST support.
- More DP-MST related fixes, and move all state into atomic.
- Make DRM_MIPI_DBI select DRM_KMS_HELPER.
- Add audio_infoframe packing for DP.
- Add logging when some atomic check functions fail.
- Assorted documentation updates and fixes.
Driver Changes:
- Assorted cleanups and fixes in msm, lcdif, nouveau, virtio,
panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via,
bochs, qxl, sun4i.
- Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels.
- Improve DP-MST modeset state handling in amdgpu, nouveau, i915.
- Drop DP-MST from radeon driver, it was broken and only user of legacy
DP-MST.
- Handle unplugging better in vc4.
- Simplify drm cmdparser tests.
- Add DP support to ti-sn65dsi86.
- Add MT8195 DP support to mediatek.
- Support RGB565, XRGB64, and ARGB64 formats in vkms.
- Convert sun4i tv support to atomic.
- Refactor vc4/vec TV Modesetting, and fix timings.
- Use atomic helpers instead of simple display helpers in ssd130x.
Maintainer changes:
- Add Douglas Anderson as reviewer for panel-edp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.
Also sneak in the s/dev_priv/i915/ rename while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On BDW+ M/N are double buffered and so we can easily reprogram them
during a fastset. So for eDP panels that support seamless DRRS we
can just change these without a full modeset.
For earlier platforms we'd need to play tricks with M1/N1 vs.
M2/N2 during the fastset to make sure we do the switch atomically.
Not sure the added complexity is worth the hassle, so leave it
alone for now.
The slight downside is that we have to keep the link running at
a link rate capable of supporting the highest refresh rate we
want to use. For the moment we just pick the highest mode the
panel reports and calculate the link based on that. This might
need further refinement (eg. if we run into bandwidth
restrictions)...
v2: Only use the high link rate if the platform really supports
the seamless M/N change uring fastset (ie. bdw+)
v3: Rebase due to HAS_DOUBLE_BUFFERED_M_N()
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-16-ville.syrjala@linux.intel.com
Now that we no longer fuzz M/N during fastset these should
match exctly.
In order to get a match with what the BIOS does we need to round
M/N down. And we do the opposite rounding when doing the readback.
That gets us pretty much the same thing back.
There can still be slight rounding differences between FDI M/N
vs. the DPLL output so we allow for tiny deviation in
intel_pipe_config_sanity_check().
v2: Tweak rounding/sanity check stuff a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-10-ville.syrjala@linux.intel.com
Do the DPLL computation before fastset checks. This should
allow us to get rid of all that horrible fuzzy clock handling
for fastsets. Who knows how many bugs there are caused by our
state not actually matching what the hardware will generate.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-9-ville.syrjala@linux.intel.com
Only reassign the pipe's DPLL if it's going through a full
.compute_config() cycle. If OTOH it's just getting modeset
eg. in order to change cdclk there doesn't seem much point in
picking a new DPLL for it.
This should also prevent .get_dplls() from seeing a funky port_clock
for DP even in cases where the readout produces a non-standard
clock and we (for some reason) have decided to not fully recompute
the state to remedy the situation.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-7-ville.syrjala@linux.intel.com
Currently we calculate a lot of things (pixel rate, watermarks,
cdclk) trusting that the DPLL can generate the exact frequency
we ask it. In practice that is not true and there can be
certain amount of rounding involved.
To allow us to eventually get accurate numbers for all our
DPLL clock derived state we need to move the DPLL calculation
to hapen much earlier. To that end we hoist it up to the just
after the fastset checks. For now we just do the easy code
motion, and the actual back feeding of the final DPLL clock
into the state will come later.
A slight change here is that now .crtc_compute_clock()
can get called while the shared_dpll is still assigned.
But since .crtc_compute_clock() no longer assignes new
shared_dplls this is perfectly fine.
TODO: I'd actually like to do this before the fastset check
so that if the DPLL state should change we actually do the
modeset. Which I think is what the video aficionados want,
but it might not be what the fans of fastboot want. Not yet
sure how to reconcile those conflicting requirements...
v2: s/return/goto/ in error handling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-6-ville.syrjala@linux.intel.com
So far, different views (normal, partial, rotated and remapped)
into the same object are only supported for GGTT mappings.
But with the upcoming VM_BIND feature, PPGTT will also use the
partial view mapping. Hence rename ggtt_view to more generic
gtt_view.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com
We have a couple of places that want to make distinction between
double buffered M/N registers vs. the split M1/N1+M2/N2 registers.
Add a helper for that.
v2: Turn into a HAS_ macro (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-4-ville.syrjala@linux.intel.com
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
-----BEGIN PGP SIGNATURE-----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=kU/l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
i915->hotplug.dig_port_work can be queued from intel_hpd_irq_handler
called by IRQ handler or by intel_hpd_trigger_irq called from dp_mst.
Since dp_mst is suspended after irq handler uninstall, a cleaner approach
is to cancel hpd work after intel_dp_mst_suspend, otherwise we risk
use-after-free.
It should fix following WARNINGS:
[283.405824] cpu_latency_qos_update_request called for unknown object
[283.405866] WARNING: CPU: 2 PID: 240 at kernel/power/qos.c:296 cpu_latency_qos_update_request+0x2d/0x100
[283.405912] CPU: 2 PID: 240 Comm: kworker/u64:9 Not tainted 5.18.0-rc6-Patchwork_103738v3-g1672d1c43e43+ #1
[283.405915] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[283.405916] Workqueue: i915-dp i915_digport_work_func [i915]
[283.406020] RIP: 0010:cpu_latency_qos_update_request+0x2d/0x100
...
[283.406040] Call Trace:
[283.406041] <TASK>
[283.406044] intel_dp_aux_xfer+0x60e/0x8e0 [i915]
[283.406131] ? finish_swait+0x80/0x80
[283.406139] intel_dp_aux_transfer+0xc5/0x2b0 [i915]
[283.406218] drm_dp_dpcd_access+0x79/0x130 [drm_display_helper]
[283.406227] drm_dp_dpcd_read+0xe2/0xf0 [drm_display_helper]
[283.406233] intel_dp_hpd_pulse+0x134/0x570 [i915]
[283.406308] ? __down_killable+0x70/0x140
[283.406313] i915_digport_work_func+0xba/0x150 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4586
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5558
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-2-andrzej.hajda@intel.com
On machins without an i915 opregion the acpi_video driver immediately
probes the ACPI video bus and used to also immediately register
acpi_video# backlight devices when supported.
Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() after the i915 calls
acpi_video_register() (after setting up the i915 opregion) so that the
acpi_video backlight devices get registered on systems where the i915
native backlight device is not registered.
Changes in v2:
-Only call acpi_video_register_backlight() when a panel is detected
Changes in v3:
-Add a new intel_acpi_video_register() helper which checks if a panel
is present and then calls acpi_video_register_backlight()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.
Since drm-next does not have commit f0c70d41e4 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In another long-overdue cleanup, add a display sub-struct to
drm_i915_private, and start moving display related members there. Start
with display funcs that need a rename anyway to not collide with the new
display member.
Add a new header under display/ for defining struct intel_display.
Rename struct drm_i915_display_funcs to intel_display_funcs while at it.
v2:
- Fix multi-line comment style (Arun)
- Use display as the member name
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d44cae096b664f7015f8c797d6dfd4964226d4f8.1661346845.git.jani.nikula@intel.com
As Daniel Vetter pointed out, if we only use the atomic modesetting locks
with MST it's technically possible for a driver with non-blocking modesets
to race when it comes to MST displays - as we make the mistake of not doing
our own CRTC commit tracking in the topology_state object.
This could potentially cause problems if something like this happens:
* User starts non-blocking commit to disable CRTC-1 on MST topology 1
* User starts non-blocking commit to enable CRTC-2 on MST topology 1
There's no guarantee here that the commit for disabling CRTC-2 will only
occur after CRTC-1 has finished, since neither commit shares a CRTC - only
the private modesetting object for MST. Keep in mind this likely isn't a
problem for blocking modesets, only non-blocking.
So, begin fixing this by keeping track of which CRTCs on a topology have
changed by keeping track of which CRTCs we release or allocate timeslots
on. As well, add some helpers for:
* Setting up the drm_crtc_commit structs in the ->commit_setup hook
* Waiting for any CRTC dependencies from the previous topology state
v2:
* Use drm_dp_mst_atomic_setup_commit() directly - Jani
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-9-lyude@redhat.com
Including:
- Most intrusive patch is small and changes the default
allocation policy for DMA addresses. Before the change the
allocator tried its best to find an address in the first 4GB.
But that lead to performance problems when that space gets
exhaused, and since most devices are capable of 64-bit DMA
these days, we changed it to search in the full DMA-mask
range from the beginning. This change has the potential to
uncover bugs elsewhere, in the kernel or the hardware. There
is a Kconfig option and a command line option to restore the
old behavior, but none of them is enabled by default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for
the dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save
memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm
driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=hI2K
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
Cleanup the intel_phy_is_combo
to accommodate for cases where combo phy is not available.
v2: retain comment that explains DG2 returning false from
intel_phy_is_combo() (Arun)
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725225028.98612-1-anusha.srivatsa@intel.com
Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
intel-iommu.h is not needed in drm/i915 anymore. Remove its include.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eliminate the PIPECONF RMWs from .comit_commit() so
that we can finally declare the whole vblank evade part
(and the noarm() part) of the pipe commit free of register
reads. Or at least I hope that's the last read...
Only the i9xx/ilk codepaths need this for now, but let's
add the same thing for hsw+ just in case we want to start
calling that during fastsets at some point (eg. to change
dithering settings/etc.).
Should open up the way to start experimenting with
different DSB usage approaches for pipe commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413192607.27533-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.
Fix some minor checkpatch issues while at it.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com
Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely
consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of
69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz
(matches what the EDID actually declares).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Avoid bringing the entire machine down even if there's a bug that
shouldn't happen, but won't corrupt the system either. Log them loudly
and limp on.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531162527.1062319-1-jani.nikula@intel.com
Don't see a real reson not to check hw.active and hw.enable in
intel_pipe_config_compare(). We do have some checks for them
at a higher level, but I think better check them also in
intel_pipe_config_compare() in case something else doesn't
do a thorough enough job.
Also shuffle the mst_master_transcoder check next to the
cpu_transcoder check for a bit of consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the "[CRTC:%d:%s]'/etc. format for some of the modeset debugs
so we know more about what has happened during the modeset state
computation.
Also tweak the connector bpp debug message a bit to make it less
confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the state+crtc calling convention for intel_modeset_pipe_config()
and othere related functions. Many of these need the full atomic state
anyway so passing it all the way through is just nicer than having to
worry about whether it can actually be extracted from eg. the crtc
state passed in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Deduplicate the drm_rect comparisons.
We also drop the redundant pch_pfit.enabled check since the
pch_pfit.dst rectanble will be zeroed anyway when the pfit
is not enabled.
v2: Document why we drop the enabled check (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.
We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.
Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.
TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.
v2: Note the intel_drrs_frontbuffer_update() change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Parsing the panel specific data (anything that depends on panel_type)
from VBT is currently happening too early. Split the whole thing
into global vs. panel specific parts so that we can start doing
the panel specific parsing at a later time.
v2: Clarify that this is about panel_type (Jani)
Split out the leak checks (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-12-ville.syrjala@linux.intel.com
drm/i915 feature pull #2 for v5.19:
Features and functionality:
- Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper)
- Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood)
Refactoring and cleanups:
- Power well refactoring and cleanup (Imre)
- GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi)
- DPLL refactoring and cleanup (Ville)
- VBT panel specific data parsing cleanup (Ville)
- Use drm_mode_init() for on-stack modes (Ville)
Fixes:
- Fix PSR state pipe A/B confusion by clearing more state on disable (José)
- Fix FIFO underruns caused by not taking DRAM channel into account (Vinod)
- Fix FBC flicker on display 11+ by enabling a workaround (José)
- Fix VBT seamless DRRS min refresh rate check (Ville)
- Fix panel type assumption on bogus VBT data (Ville)
- Fix panel data parsing for VBT that misses panel data pointers block (Ville)
- Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre)
Merges:
- Backmerge drm-next (Jani)
- GVT changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Start splitting the .compute_crtc_clock() into two parts; one
part does the computation, the second part does the shared dpll
assignment. I want to move the actual computation part much earlier
into the compute_config() phase.
v2: dg2_crtc_get_shared_dpll() not needed (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move some checks into intel_dpll_crtc_compute_clock() from the
caller. Avoids the caller from having to worry about all this
crap.
We'll also reorder the hw.enable vs. shared_dpll checks since
it makes sense to sanity check that we've cleared out the
old shared_dpll even if the pipe is getting disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.
For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.
v2: Don't add a typedef for the bitmap struct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com
Follow the new i9xx DPLL FP register programming sequence
introduced in commit 62d66b2183 ("drm/i915: Fold
i9xx_set_pll_dividers() into i9xx_enable_pll()") in the
i830 "power well" code as well. Just for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Add support for the DG2 specific render compression with clear color
framebuffer format.
DG2 onwards discrete gfx has support for new flat CCS mapping,
which brings in display feature in to avoid Aux walk for compressed
surface. This support build on top of Flat CCS support added in XEHPSDV.
FLAT CCS surface base address should be 64k aligned,
Compressed displayable surfaces must use tile4 format.
HAS: 1407880786
B.Spec : 7655
B.Spec : 53902
v2: Merge all bits required for the support of functionality into this
patch from the patch adding the corresponding modifier.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-5-imre.deak@intel.com
PIPE_MBUS_DBOX_CTL was only being programmed when a pipe is being
enabled but that could potentially cause issues as it could have
mismatching values while pipes are being enabled.
So here moving the PIPE_MBUS_DBOX_CTL programming of all pipes to be
executed before the function that enables all pipes, leaving all pipes
with a matching A_CREDIT value.
While at it, also moving it to intel_pm.c as we are trying to reduce
the gigantic size of intel_display.c and intel_pm.c have other MBUS
programing sequences.
v2:
- do not program PIPE_MBUS_DBOX_CTL if pipe will not be active or
when it do not needs modeset
- remove the checks to wait a vblank
v3:
- checking if dbuf state is present in state before using it
v4:
- removing redundant checks
- calling intel_atomic_get_new_dbuf_state instead of
intel_atomic_get_dbuf_state
BSpec: 49213
BSpec: 50343
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-3-jose.souza@intel.com
Alderlake-P has different MBUS DBOX BW and B credits than other
platforms, so here setting it properly.
BSpec: 49213
BSpec: 50343
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-2-jose.souza@intel.com
MBUS_DBOX_B2B_TRANSACTIONS_MAX, MBUS_DBOX_B2B_TRANSACTIONS_DELAY and
MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN were being programmed with
zeros while specification has different default values for this
registers in display 12 and newer.
While at it also converting all MBUS_DBOX macros to use REG_* macros.
BSpec: 50343
BSpec: 20231
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-1-jose.souza@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To reduce the amount of registers written during the vblank evade
critical section let's also split the .color_commit() hook to
noarm+arm pair. The noarm hook runs before the vblank evasion
with the arm hook staying inside the critical section.
Just the framework here, actually moving stuff out into the noarm
hook will follow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Rename the DRRS functiosn to say "(de)activate" rather than
"enable/disable". This let's us differentiate between the
logically enabled vs. actually currently active cases.
v2: Fix kernel doc for intel_drrs_deactivate()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Handle the plane relative data rate in exactly the same
way as we already handle the real data rate. Ie. pre-calculate
it during intel_plane_atomic_check_with_state(), and assign/clear
it for the Y plane as needed. This should guarantee that the
tracking is 100% consistent, and makes me have to think less
when the same apporach is used by both types of data rate.
We might even want to consider replacing the relative
data rate with the real data rate entirely, but it's not
clear if that will produce less optimal plane ddb
allocations. So for now lets keep using the current approach.
v2: Rebase due to async flip wm optimization
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-4-ville.syrjala@linux.intel.com
Split the currently combined plane data_rate into the proper
Y vs. CbCr components. This matches how we now track the
plane dbuf allocations, and thus will make the dbuf bandwidth
calculations actually produce the correct numbers for each
dbuf slice.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-3-ville.syrjala@linux.intel.com
Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.
This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.
v2: Rebase
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com
Let's just do a full DRRS disable/enable across all pipe updates.
This guarantees that the DRRS work doesn't interfere with anything
while the atomic commit is busy reprogramming the pipe.
Needed so that we can start reprogramming M/N seamlessly during
fastsets whenever possible. Also avoids the pre-bdw DRRS PIPECONF
rmw racing with the potential PIPECONF write from the atomic
commit (eg. due to GAMMA_MODE changes).
v2: Include has_drrs in state dump (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315213944.17132-1-ville.syrjala@linux.intel.com
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason to keep the DRRS enable/disable hidden insider the encoder
hooks. Let's just move them all the way up into platform independent
code so that all platforms get to use them. These are nops when
the state computation doesn't think DRRS is possible.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-14-ville.syrjala@linux.intel.com
Ger rid of one more ugly crtc->config usage by storing the DRRS
state under intel_crtc. intel_drrs_enable() copies what it needs
from the crtc state, after which DRRS can be blissfully ignorant
of anything going on around it.
This also lets multiple pipes do DRRS simultanously and entirely
independently.
v2: Split out some stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When using bigjoiner it's useful to know the offset of each
individual pipe in the whole set of joined pipes. Let's include
that information in our PIPESRC rectangle. With this we can make
the plane clipping code blissfully unaware of bigjoiner usage, as
all we have to do is remove the pipe's offset from the final plane
destination coordinates.
v2: Use intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-14-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Replace the hardcoded 2 pipe assumptions when we're massaging
pipe_mode and the pipe_src rect to be suitable for bigjoiner.
Instead we can just count the number of pipes in the bitmask.
v2: Introduce intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-13-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Since we now have the bigjoiner_pipes bitmask the boolean
is redundant. Get rid of it.
Also, populating bigjoiner_pipes already during
encoder->compute_config() allows us to use it much earlier
during the state calculation as well. The initial aim is
to use it in intel_crtc_compute_config().
v2: Move the hweight(bigjoiner_pipes) stuff to a later patch
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-12-ville.syrjala@linux.intel.com
Instead of just having the pipe_src_{w,h} let's use a full
drm_rect for it. This will be particularly useful to astract
away some bigjoiner details.
v2: No hweight() stuff yet
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Now that we track framestart_delay in the crtc state with readout
and state checker support we can remove the explicit framestart_delay
sanitation code.
Also I'm not convinced reprogramming this while the pipe is running
is even valid. CHICKEN_TRANS (hsw+) and TRANS_CHICKEN2 (cpt+) docs
at least make no mention of double buffering which seems to imply
that live reprogramming is not supported. On older platforms
PIPECONF and PCH_TRANSCONF (ibx) are double buffered though, so
might be that we could do this on the older platforms. But doesn't
really make sense to special case old platforms for this.
So from now on if the BIOS has misprogrammed this we shall simply do
a full modeset at boot to fix it up. Such systems will of course lose
fastboot, but I think less code (and less uncertainty what
reprogramming this on a running pipe will even do) outweighs that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221110356.5532-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We need to make framestart_delay dynamic for DRRS on PCH
ports. To that end move it into the crtc state. As a bonus
we get state check+dump for it. Will also allow us to get
rid of the somewhat questionable framestart_delay sanitation
code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221110356.5532-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.
To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.
Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.
However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.
And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Remove the local onoff() implementation and adopt the
str_on_off() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-4-lucas.demarchi@intel.com
Remove the local enableddisabled() implementation and adopt the
str_enabled_disabled() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-3-lucas.demarchi@intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
When calculating pipe_mode and when doing readout we need
to order our steps correctly.
1. We start with adjusted_mode crtc timings being populated
with the transcoder timings (either via readout or
compute_config(). These will be per-segment for MSO.
2. For all other uses we want the full crtc timings so
we ask intel_splitter_adjust_timings() to expand
the per-segment numbers to their full glory
3. If bigjoiner is used we the divide the full numbers
down to per-pipe numbers using intel_bigjoiner_adjust_timings()
During readout we also have to reconstruct the adjusted_mode
normal timings (ie. not the crtc_ stuff). These are supposed
to reflect the full timings of the display. So we grab these
between steps 2 and 3.
The "user" mode readout (mainly done for fastboot purposes)
should be whatever mode the user would have used had they
asked us to do a modeset. We want the full timings for this
as the per-segment timings are not suppoesed to be user visible.
Also the user mode normal timings hdisplay/vdisplay need to
match PIPESRC (that is where we get our PIPESRC size
we doing a modeset with a user supplied mode).
And we end up with
- adjusted_mode normal timigns == full timings
- adjusted_mode crtc timings == transcoder timings
(per-segment timings for MSO, full timings otherwise)
- pipe_mode normal/crtc timings == pipe timings
(full timings divided by the number of bigjoiner pipes, if any)
- user mode normal timings == full timings with
hdisplay/vdisplay replaced with PIPESRC size
- user mode crtc timings == full timings
Yes, that is a lot of timings. One day we'll try to remove
some of the ones we don't actually need to keep around...
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-10-ville.syrjala@linux.intel.com
Pull intel_crtc_compute_pipe_mode() out from
intel_crtc_compute_config(). Since it's semi related
we'll suck in the max dotclock/double wide checks in
as well.
And we'll pimp the debugs while at it.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-9-ville.syrjala@linux.intel.com
Do the s/dev_priv/i915/ and s/pipe_config/crtc_state/ renames
to intel_crtc_compute_config(). I want to start splitting this
up a bit and doing the renames now avoids spreading these old
nameing conventions elsewhere. No functional changes.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-5-ville.syrjala@linux.intel.com
bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tile4 in bspec format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v3: - Rebased patch on top of new changes related to plane_caps.
- Added static assert to check that PLANE_CTL_TILING_YF
matches PLANE_CTL_TILING_4(Nanley Chery)
- Fixed naming and layout description for Tile 4 in drm uapi
header(Nanley Chery)
v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit fff13e63a1 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit 19f65a3dbf ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated
usage. Split the register macros to separated files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output. This behaves similarly to the TC1
on past platforms with just a couple minor differences:
* DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
ICP/TGP/ADP.
* DG2 doesn't need the hpd inversion setting that we had to use on DG1
v2:
intel_ddi_init(dev_priv, PORT_TC1); [Matt]
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
Exfiltrate intel_plane_atomic_calc_changes() and its friends from
intel_display.c to intel_atomic_plane.c since that is a much better
fit.
While at it also nuke the official looking kernel docs for
intel_wm_need_update() and flag it for eventual destruction so
that people don't get any wrong ideas about using it in new code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Currently the bigjoiner state copy logic is kind of
a byzantine mess.
Clean it up to operate in the following manner during a full
modeset:
1) master uapi -> hw state copy
2) master hw -> slave hw state copy
And during a non-modeset update we do:
1) master uapi -> hw state light copy
2) master hw -> slave hw state light copy
I think that is now easier to reason about since we never do
any kind of master uapi -> slave hw state copy short circuit
that could happen previously.
Obviously this does now depend on the master uapi->hw copy
always happening before the master hw -> slave hw copy, but
that is guaranteed by the fact that we always add both crtcs
to the state early, the crtcs are registered in pipe
order (so the compute_config loop happens in pipe order),
and the hardware requires the master pipe has to be lower
than the slave pipe as well. And for good measure we shall
add a check+WARN for this before doing the bigjoiner crtc
assignment.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072049.1610-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
There's some weird junk in intel_atomic_check_bigjoiner()
that's trying to look at the old crtc state's bigjoiner
usage for some reason. That code is totally unnecessary,
and maybe even actively harmful. Not entirely sure which
since it's such a mess that I can't actually wrap my brain
around what it ends up doing.
Either way, thanks to intel_bigjoiner_add_affected_crtcs()
all of the old bigjoiner crtcs are guaranteed to be in the
state already if any one of them is in the state. Also if
any one of those crtcs got flagged for a modeset, then all
of them will have been flagged, and the bigjoiner links
will have been detached via kill_bigjoiner_slave().
So there is no need to look examing any old bigjoiner
usage in intel_atomic_check_bigjoiner(). All we have to care
about is whether bigjoiner is needed for the new state,
and whether we can get the slave crtc we need.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We seem to be missing a few things from the bigjoiner state copy.
Namely hw.mode isn't getting copied (which probably causes PIPESRC
to be misconfigured), CTM/LUTs aren't getting copied (which could
cause the pipe to produced incorrect output), and we also forgot
to copy over the color_mgmt_changed flag so potentially we fail
to do the actual CTM/LUT programming (assuming we aren't doing
a full modeset or fastset). Fix it all.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072009.1546-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The core doesn't flag scaling_filter prop changes as needing
a modeset. That doesn't work for us since we only reprogram the
pipe scaler during full modesets and fastsets. So we need to
flag the prop change as a modeset ourselves. Assuming nothing else
has changed the operation will get promoted (demoted?) to a fastset
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
IPS must be disabled prior to disabling the last plane (excluding
the cursor). Make the code do that instead of assuming the primary
plane would be the last one. This is probably 100% theoretical
as the BIOS should never light up the other planes anyway. But
no harm in making the code totally consistent.
Also let's update the ips_enabled flag in the crtc state afterwards
so that the first atomic commit has accurate information about
the state of IPS.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
IPS is a pretty well isolated feature. Move the relevant code
to a separate file from polluting intel_display.c.
I stuck to the hsw_ips name since that's what the function were
already using, and also to avoid confusion with the ILK
"Intelligen Power Sharing"/intel_ips GPU turbo stuff.
And let's also do the s/dev_priv/i915/ rename while touching
most of the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason the caller of the IPS pre/post update hooks should
be responsible for the actual IPS enab/disable. Just pull those
calls into the pre/post update hooks themselves. And while
at it let's adjust the function naming a bit to have a consistent
namespace.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Hoist the IPS related vblank waits one level up. Later on we'll
want to consolidate all the potential pre-plane update vblank
waits into one so we can't be hiding any in low level code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
When reprogramming M/N live on BDW+ we must write the LINK_N
register last as it's the one that arms the double buffered
register update for all the M/N registers. Document this so
that we don't accidentally break things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in special casing the check of dp_m2_n2 on pre-bdw platforms.
Either the transcoder has M2/N2 in which case the values should be
set to something sensible, or it doesn't in which case dp_m2_n2 is
always zeroed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make life simpler by always programming DP M2/N2 with a consistent
value. This will lets use do state readout+chec unconditionally.
I was first going to just set M2/N2=M1/N1 but then it occurred
to me that it might interfere with fastboot on account of BIOS
likely leaving the registers zeroed. So let's zero out the values
instead (except TU where a zero register value actually means '1').
Still not sure that's the best approach but lets go with it for
now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.
v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.
Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.
Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to make a clean split betwen the CPU vs. PCH transcoder
programming. To that end eliminate intel_dp_set_m_n() and just
call the individual CPU/PCH transcoder functions directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
-----BEGIN PGP SIGNATURE-----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=IMtm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Jani Nikula
Ville Syrjälä
Juha-Pekka Heikkila
Imre Deak
Ankit Nautiyal
Jouni Högander
Lucas De Marchi
Arun R Murthy
Suraj Kandpal
Matt Roper
Dnyaneshwar Bhadane
Stanislav Lisovskiy
Luca Coelho
Mika Kahola
Nathan Chancellor
Clint Taylor
Rodrigo Vivi
Daniel Vetter
Dave Airlie
Andrzej Hajda
Nirmoy Das
Madhumitha Tolakanahalli Pradeep
Maxime Ripard
Niranjana Vishwanathapura
Hans de Goede
Lyude Paul
Linus Torvalds
Anusha Srivatsa
Thomas Zimmermann
Lu Baolu
Juha-Pekka Heikkilä
José Roberto de Souza
Caz Yokoyama
Tvrtko Ursulin
Swathi Dhanavanthri