Now that we no longer fuzz M/N during fastset these should
match exctly.
In order to get a match with what the BIOS does we need to round
M/N down. And we do the opposite rounding when doing the readback.
That gets us pretty much the same thing back.
There can still be slight rounding differences between FDI M/N
vs. the DPLL output so we allow for tiny deviation in
intel_pipe_config_sanity_check().
v2: Tweak rounding/sanity check stuff a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-10-ville.syrjala@linux.intel.com
Do the DPLL computation before fastset checks. This should
allow us to get rid of all that horrible fuzzy clock handling
for fastsets. Who knows how many bugs there are caused by our
state not actually matching what the hardware will generate.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-9-ville.syrjala@linux.intel.com
Only reassign the pipe's DPLL if it's going through a full
.compute_config() cycle. If OTOH it's just getting modeset
eg. in order to change cdclk there doesn't seem much point in
picking a new DPLL for it.
This should also prevent .get_dplls() from seeing a funky port_clock
for DP even in cases where the readout produces a non-standard
clock and we (for some reason) have decided to not fully recompute
the state to remedy the situation.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-7-ville.syrjala@linux.intel.com
Currently we calculate a lot of things (pixel rate, watermarks,
cdclk) trusting that the DPLL can generate the exact frequency
we ask it. In practice that is not true and there can be
certain amount of rounding involved.
To allow us to eventually get accurate numbers for all our
DPLL clock derived state we need to move the DPLL calculation
to hapen much earlier. To that end we hoist it up to the just
after the fastset checks. For now we just do the easy code
motion, and the actual back feeding of the final DPLL clock
into the state will come later.
A slight change here is that now .crtc_compute_clock()
can get called while the shared_dpll is still assigned.
But since .crtc_compute_clock() no longer assignes new
shared_dplls this is perfectly fine.
TODO: I'd actually like to do this before the fastset check
so that if the DPLL state should change we actually do the
modeset. Which I think is what the video aficionados want,
but it might not be what the fans of fastboot want. Not yet
sure how to reconcile those conflicting requirements...
v2: s/return/goto/ in error handling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-6-ville.syrjala@linux.intel.com
So far, different views (normal, partial, rotated and remapped)
into the same object are only supported for GGTT mappings.
But with the upcoming VM_BIND feature, PPGTT will also use the
partial view mapping. Hence rename ggtt_view to more generic
gtt_view.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901183854.3446-1-niranjana.vishwanathapura@intel.com
We have a couple of places that want to make distinction between
double buffered M/N registers vs. the split M1/N1+M2/N2 registers.
Add a helper for that.
v2: Turn into a HAS_ macro (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-4-ville.syrjala@linux.intel.com
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
-----BEGIN PGP SIGNATURE-----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=kU/l
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
i915->hotplug.dig_port_work can be queued from intel_hpd_irq_handler
called by IRQ handler or by intel_hpd_trigger_irq called from dp_mst.
Since dp_mst is suspended after irq handler uninstall, a cleaner approach
is to cancel hpd work after intel_dp_mst_suspend, otherwise we risk
use-after-free.
It should fix following WARNINGS:
[283.405824] cpu_latency_qos_update_request called for unknown object
[283.405866] WARNING: CPU: 2 PID: 240 at kernel/power/qos.c:296 cpu_latency_qos_update_request+0x2d/0x100
[283.405912] CPU: 2 PID: 240 Comm: kworker/u64:9 Not tainted 5.18.0-rc6-Patchwork_103738v3-g1672d1c43e43+ #1
[283.405915] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[283.405916] Workqueue: i915-dp i915_digport_work_func [i915]
[283.406020] RIP: 0010:cpu_latency_qos_update_request+0x2d/0x100
...
[283.406040] Call Trace:
[283.406041] <TASK>
[283.406044] intel_dp_aux_xfer+0x60e/0x8e0 [i915]
[283.406131] ? finish_swait+0x80/0x80
[283.406139] intel_dp_aux_transfer+0xc5/0x2b0 [i915]
[283.406218] drm_dp_dpcd_access+0x79/0x130 [drm_display_helper]
[283.406227] drm_dp_dpcd_read+0xe2/0xf0 [drm_display_helper]
[283.406233] intel_dp_hpd_pulse+0x134/0x570 [i915]
[283.406308] ? __down_killable+0x70/0x140
[283.406313] i915_digport_work_func+0xba/0x150 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4586
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5558
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-2-andrzej.hajda@intel.com
On machins without an i915 opregion the acpi_video driver immediately
probes the ACPI video bus and used to also immediately register
acpi_video# backlight devices when supported.
Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() after the i915 calls
acpi_video_register() (after setting up the i915 opregion) so that the
acpi_video backlight devices get registered on systems where the i915
native backlight device is not registered.
Changes in v2:
-Only call acpi_video_register_backlight() when a panel is detected
Changes in v3:
-Add a new intel_acpi_video_register() helper which checks if a panel
is present and then calls acpi_video_register_backlight()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.
Since drm-next does not have commit f0c70d41e4 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In another long-overdue cleanup, add a display sub-struct to
drm_i915_private, and start moving display related members there. Start
with display funcs that need a rename anyway to not collide with the new
display member.
Add a new header under display/ for defining struct intel_display.
Rename struct drm_i915_display_funcs to intel_display_funcs while at it.
v2:
- Fix multi-line comment style (Arun)
- Use display as the member name
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d44cae096b664f7015f8c797d6dfd4964226d4f8.1661346845.git.jani.nikula@intel.com
As Daniel Vetter pointed out, if we only use the atomic modesetting locks
with MST it's technically possible for a driver with non-blocking modesets
to race when it comes to MST displays - as we make the mistake of not doing
our own CRTC commit tracking in the topology_state object.
This could potentially cause problems if something like this happens:
* User starts non-blocking commit to disable CRTC-1 on MST topology 1
* User starts non-blocking commit to enable CRTC-2 on MST topology 1
There's no guarantee here that the commit for disabling CRTC-2 will only
occur after CRTC-1 has finished, since neither commit shares a CRTC - only
the private modesetting object for MST. Keep in mind this likely isn't a
problem for blocking modesets, only non-blocking.
So, begin fixing this by keeping track of which CRTCs on a topology have
changed by keeping track of which CRTCs we release or allocate timeslots
on. As well, add some helpers for:
* Setting up the drm_crtc_commit structs in the ->commit_setup hook
* Waiting for any CRTC dependencies from the previous topology state
v2:
* Use drm_dp_mst_atomic_setup_commit() directly - Jani
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-9-lyude@redhat.com
Including:
- Most intrusive patch is small and changes the default
allocation policy for DMA addresses. Before the change the
allocator tried its best to find an address in the first 4GB.
But that lead to performance problems when that space gets
exhaused, and since most devices are capable of 64-bit DMA
these days, we changed it to search in the full DMA-mask
range from the beginning. This change has the potential to
uncover bugs elsewhere, in the kernel or the hardware. There
is a Kconfig option and a command line option to restore the
old behavior, but none of them is enabled by default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for
the dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save
memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm
driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=hI2K
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
Cleanup the intel_phy_is_combo
to accommodate for cases where combo phy is not available.
v2: retain comment that explains DG2 returning false from
intel_phy_is_combo() (Arun)
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725225028.98612-1-anusha.srivatsa@intel.com
Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
intel-iommu.h is not needed in drm/i915 anymore. Remove its include.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eliminate the PIPECONF RMWs from .comit_commit() so
that we can finally declare the whole vblank evade part
(and the noarm() part) of the pipe commit free of register
reads. Or at least I hope that's the last read...
Only the i9xx/ilk codepaths need this for now, but let's
add the same thing for hsw+ just in case we want to start
calling that during fastsets at some point (eg. to change
dithering settings/etc.).
Should open up the way to start experimenting with
different DSB usage approaches for pipe commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413192607.27533-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Add new file intel_modeset_verify.c for high level modeset verification
code to declutter intel_display.h. The new file is supposed to be about
crtc/encoder/connector verification; the state verification for very
specific functionality such as plls or wm should be placed next to the
code it verifies.
Fix some minor checkpatch issues while at it.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9b47c14316a9edb772a8b8f934eabe7e928dd76.1655372759.git.jani.nikula@intel.com
Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The VBIOS/GOP may not program the FDI M/n vs. dotclock entirely
consistently. Eg. on a SNB Thinkpad X220 LVDS I see dotclock of
69.286 MHz (the best the DPLL can do) vs. FDI M/N 69.3 MHz
(matches what the EDID actually declares).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Avoid bringing the entire machine down even if there's a bug that
shouldn't happen, but won't corrupt the system either. Log them loudly
and limp on.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531162527.1062319-1-jani.nikula@intel.com
Don't see a real reson not to check hw.active and hw.enable in
intel_pipe_config_compare(). We do have some checks for them
at a higher level, but I think better check them also in
intel_pipe_config_compare() in case something else doesn't
do a thorough enough job.
Also shuffle the mst_master_transcoder check next to the
cpu_transcoder check for a bit of consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the "[CRTC:%d:%s]'/etc. format for some of the modeset debugs
so we know more about what has happened during the modeset state
computation.
Also tweak the connector bpp debug message a bit to make it less
confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the state+crtc calling convention for intel_modeset_pipe_config()
and othere related functions. Many of these need the full atomic state
anyway so passing it all the way through is just nicer than having to
worry about whether it can actually be extracted from eg. the crtc
state passed in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Deduplicate the drm_rect comparisons.
We also drop the redundant pch_pfit.enabled check since the
pch_pfit.dst rectanble will be zeroed anyway when the pfit
is not enabled.
v2: Document why we drop the enabled check (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503182242.18797-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move the panel specific VBT parsing to happen during the
output probing stage. Needs to be done because the VBT
parsing will need to look at the EDID to determine
the correct panel_type on some machines.
We split the parsed VBT data (i915->vbt) along the same
boundary. For the moment we just hoist all the panel
specific stuff into connector->panel.vbt since that seems
like the most convenient place for eg. the backlight code.
Note that we simply drop the drrs type check from
intel_drrs_frontbuffer_update() since that operates on the whole
device rather than a specific connector/encoder. But the check
was just a micro optimization so removing it doesn't actually
mattter for correctness.
TODO: Lot's of cleanup to be done in the future. Eg. most of
the DSI stuff could probably be eliminated entirely and just
parsed on demand during DSI init.
v2: Note the intel_drrs_frontbuffer_update() change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Parsing the panel specific data (anything that depends on panel_type)
from VBT is currently happening too early. Split the whole thing
into global vs. panel specific parts so that we can start doing
the panel specific parsing at a later time.
v2: Clarify that this is about panel_type (Jani)
Split out the leak checks (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-12-ville.syrjala@linux.intel.com
drm/i915 feature pull #2 for v5.19:
Features and functionality:
- Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper)
- Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood)
Refactoring and cleanups:
- Power well refactoring and cleanup (Imre)
- GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi)
- DPLL refactoring and cleanup (Ville)
- VBT panel specific data parsing cleanup (Ville)
- Use drm_mode_init() for on-stack modes (Ville)
Fixes:
- Fix PSR state pipe A/B confusion by clearing more state on disable (José)
- Fix FIFO underruns caused by not taking DRAM channel into account (Vinod)
- Fix FBC flicker on display 11+ by enabling a workaround (José)
- Fix VBT seamless DRRS min refresh rate check (Ville)
- Fix panel type assumption on bogus VBT data (Ville)
- Fix panel data parsing for VBT that misses panel data pointers block (Ville)
- Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre)
Merges:
- Backmerge drm-next (Jani)
- GVT changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Start splitting the .compute_crtc_clock() into two parts; one
part does the computation, the second part does the shared dpll
assignment. I want to move the actual computation part much earlier
into the compute_config() phase.
v2: dg2_crtc_get_shared_dpll() not needed (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move some checks into intel_dpll_crtc_compute_clock() from the
caller. Avoids the caller from having to worry about all this
crap.
We'll also reorder the hw.enable vs. shared_dpll checks since
it makes sense to sanity check that we've cleared out the
old shared_dpll even if the pipe is getting disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
Atm the port -> DDI and AUX power domain mapping is specified by relying
on the aliasing of the platform specific intel_display_power_domain enum
values. For instance D12+ platforms refer to the 'D' port and power
domain instances, which doesn't match the bspec terminology, on these
platforms the corresponding port is TC1. To make it clear what
port/domain the code refers to add a mapping between them which matches
the bspec terms on different display versions.
This also allows for removing the aliasing in enum values in a follow-up
patch.
v2: Add the functions to intel_display_power.c, use
intel_display_power_ prefix.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-14-imre.deak@intel.com
To remove the aliasing of the power domain enum values in a follow-up
patch in this patchset (requiring a bigger mask) and allow for defining
additional power domains in the future (at least some upcoming TypeC
changes requires this) convert the u64 i915_power_well_desc::domains
mask to a bitmap.
For simplicity I changed the for_each_power_domain_well() macros to
accept one domain only instead of a mask, as there isn't any current
user passing multiple domains.
v2: Don't add a typedef for the bitmap struct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414210657.1785773-9-imre.deak@intel.com
Follow the new i9xx DPLL FP register programming sequence
introduced in commit 62d66b2183 ("drm/i915: Fold
i9xx_set_pll_dividers() into i9xx_enable_pll()") in the
i830 "power well" code as well. Just for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321195006.775-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Add support for the DG2 specific render compression with clear color
framebuffer format.
DG2 onwards discrete gfx has support for new flat CCS mapping,
which brings in display feature in to avoid Aux walk for compressed
surface. This support build on top of Flat CCS support added in XEHPSDV.
FLAT CCS surface base address should be 64k aligned,
Compressed displayable surfaces must use tile4 format.
HAS: 1407880786
B.Spec : 7655
B.Spec : 53902
v2: Merge all bits required for the support of functionality into this
patch from the patch adding the corresponding modifier.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-5-imre.deak@intel.com
PIPE_MBUS_DBOX_CTL was only being programmed when a pipe is being
enabled but that could potentially cause issues as it could have
mismatching values while pipes are being enabled.
So here moving the PIPE_MBUS_DBOX_CTL programming of all pipes to be
executed before the function that enables all pipes, leaving all pipes
with a matching A_CREDIT value.
While at it, also moving it to intel_pm.c as we are trying to reduce
the gigantic size of intel_display.c and intel_pm.c have other MBUS
programing sequences.
v2:
- do not program PIPE_MBUS_DBOX_CTL if pipe will not be active or
when it do not needs modeset
- remove the checks to wait a vblank
v3:
- checking if dbuf state is present in state before using it
v4:
- removing redundant checks
- calling intel_atomic_get_new_dbuf_state instead of
intel_atomic_get_dbuf_state
BSpec: 49213
BSpec: 50343
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-3-jose.souza@intel.com
Alderlake-P has different MBUS DBOX BW and B credits than other
platforms, so here setting it properly.
BSpec: 49213
BSpec: 50343
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-2-jose.souza@intel.com
MBUS_DBOX_B2B_TRANSACTIONS_MAX, MBUS_DBOX_B2B_TRANSACTIONS_DELAY and
MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN were being programmed with
zeros while specification has different default values for this
registers in display 12 and newer.
While at it also converting all MBUS_DBOX macros to use REG_* macros.
BSpec: 50343
BSpec: 20231
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330155724.255226-1-jose.souza@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To reduce the amount of registers written during the vblank evade
critical section let's also split the .color_commit() hook to
noarm+arm pair. The noarm hook runs before the vblank evasion
with the arm hook staying inside the critical section.
Just the framework here, actually moving stuff out into the noarm
hook will follow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Rename the DRRS functiosn to say "(de)activate" rather than
"enable/disable". This let's us differentiate between the
logically enabled vs. actually currently active cases.
v2: Fix kernel doc for intel_drrs_deactivate()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Handle the plane relative data rate in exactly the same
way as we already handle the real data rate. Ie. pre-calculate
it during intel_plane_atomic_check_with_state(), and assign/clear
it for the Y plane as needed. This should guarantee that the
tracking is 100% consistent, and makes me have to think less
when the same apporach is used by both types of data rate.
We might even want to consider replacing the relative
data rate with the real data rate entirely, but it's not
clear if that will produce less optimal plane ddb
allocations. So for now lets keep using the current approach.
v2: Rebase due to async flip wm optimization
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-4-ville.syrjala@linux.intel.com
Split the currently combined plane data_rate into the proper
Y vs. CbCr components. This matches how we now track the
plane dbuf allocations, and thus will make the dbuf bandwidth
calculations actually produce the correct numbers for each
dbuf slice.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-3-ville.syrjala@linux.intel.com
Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.
This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.
v2: Rebase
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com
Let's just do a full DRRS disable/enable across all pipe updates.
This guarantees that the DRRS work doesn't interfere with anything
while the atomic commit is busy reprogramming the pipe.
Needed so that we can start reprogramming M/N seamlessly during
fastsets whenever possible. Also avoids the pre-bdw DRRS PIPECONF
rmw racing with the potential PIPECONF write from the atomic
commit (eg. due to GAMMA_MODE changes).
v2: Include has_drrs in state dump (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315213944.17132-1-ville.syrjala@linux.intel.com
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason to keep the DRRS enable/disable hidden insider the encoder
hooks. Let's just move them all the way up into platform independent
code so that all platforms get to use them. These are nops when
the state computation doesn't think DRRS is possible.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-14-ville.syrjala@linux.intel.com
Ger rid of one more ugly crtc->config usage by storing the DRRS
state under intel_crtc. intel_drrs_enable() copies what it needs
from the crtc state, after which DRRS can be blissfully ignorant
of anything going on around it.
This also lets multiple pipes do DRRS simultanously and entirely
independently.
v2: Split out some stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When using bigjoiner it's useful to know the offset of each
individual pipe in the whole set of joined pipes. Let's include
that information in our PIPESRC rectangle. With this we can make
the plane clipping code blissfully unaware of bigjoiner usage, as
all we have to do is remove the pipe's offset from the final plane
destination coordinates.
v2: Use intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-14-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Replace the hardcoded 2 pipe assumptions when we're massaging
pipe_mode and the pipe_src rect to be suitable for bigjoiner.
Instead we can just count the number of pipes in the bitmask.
v2: Introduce intel_bigjoiner_num_pipes()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-13-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Since we now have the bigjoiner_pipes bitmask the boolean
is redundant. Get rid of it.
Also, populating bigjoiner_pipes already during
encoder->compute_config() allows us to use it much earlier
during the state calculation as well. The initial aim is
to use it in intel_crtc_compute_config().
v2: Move the hweight(bigjoiner_pipes) stuff to a later patch
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-12-ville.syrjala@linux.intel.com
Instead of just having the pipe_src_{w,h} let's use a full
drm_rect for it. This will be particularly useful to astract
away some bigjoiner details.
v2: No hweight() stuff yet
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Now that we track framestart_delay in the crtc state with readout
and state checker support we can remove the explicit framestart_delay
sanitation code.
Also I'm not convinced reprogramming this while the pipe is running
is even valid. CHICKEN_TRANS (hsw+) and TRANS_CHICKEN2 (cpt+) docs
at least make no mention of double buffering which seems to imply
that live reprogramming is not supported. On older platforms
PIPECONF and PCH_TRANSCONF (ibx) are double buffered though, so
might be that we could do this on the older platforms. But doesn't
really make sense to special case old platforms for this.
So from now on if the BIOS has misprogrammed this we shall simply do
a full modeset at boot to fix it up. Such systems will of course lose
fastboot, but I think less code (and less uncertainty what
reprogramming this on a running pipe will even do) outweighs that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221110356.5532-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We need to make framestart_delay dynamic for DRRS on PCH
ports. To that end move it into the crtc state. As a bonus
we get state check+dump for it. Will also allow us to get
rid of the somewhat questionable framestart_delay sanitation
code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221110356.5532-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.
To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.
Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.
However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.
And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Remove the local onoff() implementation and adopt the
str_on_off() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-4-lucas.demarchi@intel.com
Remove the local enableddisabled() implementation and adopt the
str_enabled_disabled() from linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-3-lucas.demarchi@intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
When calculating pipe_mode and when doing readout we need
to order our steps correctly.
1. We start with adjusted_mode crtc timings being populated
with the transcoder timings (either via readout or
compute_config(). These will be per-segment for MSO.
2. For all other uses we want the full crtc timings so
we ask intel_splitter_adjust_timings() to expand
the per-segment numbers to their full glory
3. If bigjoiner is used we the divide the full numbers
down to per-pipe numbers using intel_bigjoiner_adjust_timings()
During readout we also have to reconstruct the adjusted_mode
normal timings (ie. not the crtc_ stuff). These are supposed
to reflect the full timings of the display. So we grab these
between steps 2 and 3.
The "user" mode readout (mainly done for fastboot purposes)
should be whatever mode the user would have used had they
asked us to do a modeset. We want the full timings for this
as the per-segment timings are not suppoesed to be user visible.
Also the user mode normal timings hdisplay/vdisplay need to
match PIPESRC (that is where we get our PIPESRC size
we doing a modeset with a user supplied mode).
And we end up with
- adjusted_mode normal timigns == full timings
- adjusted_mode crtc timings == transcoder timings
(per-segment timings for MSO, full timings otherwise)
- pipe_mode normal/crtc timings == pipe timings
(full timings divided by the number of bigjoiner pipes, if any)
- user mode normal timings == full timings with
hdisplay/vdisplay replaced with PIPESRC size
- user mode crtc timings == full timings
Yes, that is a lot of timings. One day we'll try to remove
some of the ones we don't actually need to keep around...
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-10-ville.syrjala@linux.intel.com
Pull intel_crtc_compute_pipe_mode() out from
intel_crtc_compute_config(). Since it's semi related
we'll suck in the max dotclock/double wide checks in
as well.
And we'll pimp the debugs while at it.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-9-ville.syrjala@linux.intel.com
Do the s/dev_priv/i915/ and s/pipe_config/crtc_state/ renames
to intel_crtc_compute_config(). I want to start splitting this
up a bit and doing the renames now avoids spreading these old
nameing conventions elsewhere. No functional changes.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-5-ville.syrjala@linux.intel.com
bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tile4 in bspec format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v3: - Rebased patch on top of new changes related to plane_caps.
- Added static assert to check that PLANE_CTL_TILING_YF
matches PLANE_CTL_TILING_4(Nanley Chery)
- Fixed naming and layout description for Tile 4 in drm uapi
header(Nanley Chery)
v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit fff13e63a1 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit 19f65a3dbf ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated
usage. Split the register macros to separated files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output. This behaves similarly to the TC1
on past platforms with just a couple minor differences:
* DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
ICP/TGP/ADP.
* DG2 doesn't need the hpd inversion setting that we had to use on DG1
v2:
intel_ddi_init(dev_priv, PORT_TC1); [Matt]
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
Exfiltrate intel_plane_atomic_calc_changes() and its friends from
intel_display.c to intel_atomic_plane.c since that is a much better
fit.
While at it also nuke the official looking kernel docs for
intel_wm_need_update() and flag it for eventual destruction so
that people don't get any wrong ideas about using it in new code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211090629.15555-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.
It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.
Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Currently the bigjoiner state copy logic is kind of
a byzantine mess.
Clean it up to operate in the following manner during a full
modeset:
1) master uapi -> hw state copy
2) master hw -> slave hw state copy
And during a non-modeset update we do:
1) master uapi -> hw state light copy
2) master hw -> slave hw state light copy
I think that is now easier to reason about since we never do
any kind of master uapi -> slave hw state copy short circuit
that could happen previously.
Obviously this does now depend on the master uapi->hw copy
always happening before the master hw -> slave hw copy, but
that is guaranteed by the fact that we always add both crtcs
to the state early, the crtcs are registered in pipe
order (so the compute_config loop happens in pipe order),
and the hardware requires the master pipe has to be lower
than the slave pipe as well. And for good measure we shall
add a check+WARN for this before doing the bigjoiner crtc
assignment.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072049.1610-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
There's some weird junk in intel_atomic_check_bigjoiner()
that's trying to look at the old crtc state's bigjoiner
usage for some reason. That code is totally unnecessary,
and maybe even actively harmful. Not entirely sure which
since it's such a mess that I can't actually wrap my brain
around what it ends up doing.
Either way, thanks to intel_bigjoiner_add_affected_crtcs()
all of the old bigjoiner crtcs are guaranteed to be in the
state already if any one of them is in the state. Also if
any one of those crtcs got flagged for a modeset, then all
of them will have been flagged, and the bigjoiner links
will have been detached via kill_bigjoiner_slave().
So there is no need to look examing any old bigjoiner
usage in intel_atomic_check_bigjoiner(). All we have to care
about is whether bigjoiner is needed for the new state,
and whether we can get the slave crtc we need.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We seem to be missing a few things from the bigjoiner state copy.
Namely hw.mode isn't getting copied (which probably causes PIPESRC
to be misconfigured), CTM/LUTs aren't getting copied (which could
cause the pipe to produced incorrect output), and we also forgot
to copy over the color_mgmt_changed flag so potentially we fail
to do the actual CTM/LUT programming (assuming we aren't doing
a full modeset or fastset). Fix it all.
v2: Fix uapi.ctm vs. hw.ctm copy-paste fail
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204072009.1546-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The core doesn't flag scaling_filter prop changes as needing
a modeset. That doesn't work for us since we only reprogram the
pipe scaler during full modesets and fastsets. So we need to
flag the prop change as a modeset ourselves. Assuming nothing else
has changed the operation will get promoted (demoted?) to a fastset
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
IPS must be disabled prior to disabling the last plane (excluding
the cursor). Make the code do that instead of assuming the primary
plane would be the last one. This is probably 100% theoretical
as the BIOS should never light up the other planes anyway. But
no harm in making the code totally consistent.
Also let's update the ips_enabled flag in the crtc state afterwards
so that the first atomic commit has accurate information about
the state of IPS.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
IPS is a pretty well isolated feature. Move the relevant code
to a separate file from polluting intel_display.c.
I stuck to the hsw_ips name since that's what the function were
already using, and also to avoid confusion with the ILK
"Intelligen Power Sharing"/intel_ips GPU turbo stuff.
And let's also do the s/dev_priv/i915/ rename while touching
most of the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No reason the caller of the IPS pre/post update hooks should
be responsible for the actual IPS enab/disable. Just pull those
calls into the pre/post update hooks themselves. And while
at it let's adjust the function naming a bit to have a consistent
namespace.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Hoist the IPS related vblank waits one level up. Later on we'll
want to consolidate all the potential pre-plane update vblank
waits into one so we can't be hiding any in low level code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209113526.7595-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
When reprogramming M/N live on BDW+ we must write the LINK_N
register last as it's the one that arms the double buffered
register update for all the M/N registers. Document this so
that we don't accidentally break things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in special casing the check of dp_m2_n2 on pre-bdw platforms.
Either the transcoder has M2/N2 in which case the values should be
set to something sensible, or it doesn't in which case dp_m2_n2 is
always zeroed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make life simpler by always programming DP M2/N2 with a consistent
value. This will lets use do state readout+chec unconditionally.
I was first going to just set M2/N2=M1/N1 but then it occurred
to me that it might interfere with fastboot on account of BIOS
likely leaving the registers zeroed. So let's zero out the values
instead (except TU where a zero register value actually means '1').
Still not sure that's the best approach but lets go with it for
now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.
v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.
Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.
Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to make a clean split betwen the CPU vs. PCH transcoder
programming. To that end eliminate intel_dp_set_m_n() and just
call the individual CPU/PCH transcoder functions directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
-----BEGIN PGP SIGNATURE-----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=IMtm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use REG_GENMASK() & co. for the M/N register values. There are
also a lot of weird unused defines (eg. *_OFFSET) we can just
throw out.
Also let's mask out the unused bits during readout for good
measure. Previously we only masked out the TU_SIZE from one
of the registers, which was a bit too inconsistent for my
taste.
v2: Mention the readout masking in the commit msg (Jani)
Deal wth gvt
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127120219.20143-1-ville.syrjala@linux.intel.com
Use REG_GENMASK() & co. when dealing with PIPESRC.
Note that i9xx_get_initial_plane_config() will now use the
full 16 bit mask whereas previously it used 12 bits only.
But intel_get_pipe_src_size() already used the full 16 bits
on all platforms anyway, so at least we're consistent now.
The high bits beyond the max supported pipe source size
should not be set in any case so this seems fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since tgl PIPE_DSL has 20 bits for the scanline. Let's bump our
definition to match. And while at it let's also add the define
for the current field readback.
We can also get rid of the gen2 vs. gen3+ nonsense since none
of the extra bits ever did anything and just always read
as zero. And now we extend all platforms to use the tgl+
20 bits deinition, but again that is fine since all the bits
used to be mbz and always read as zero on all the platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112193813.8224-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Lift the dsc/joiner enable up from the wonky places where it
currently sits (ddi .pre_enable() or icl_ddi_bigjoiner_pre_enable())
into hsw_crtc_enable() where we write the other per-pipe stuff
as well. Makes the transcoder vs. pipe split less confusing.
For DSI this results in slight reordering between the dsc/joiner
enable vs. transcoder timings setup, but I can't really think
why that should cause any issues since the transcoder isn't yet
enabled at that point.
v2: Take care of dsi (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125063937.7003-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pull the transcoder specific modeset steps into a single place.
With bigoiner we need to keep in mind wheher we're dealing with
the transcoder or the pipe, and a slightly higher level split makes
that easier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124192638.26262-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This optimization allows to achieve higher perfomance
during async flips.
For the first async flip we have to still temporarily
switch to sync flip, in order to reprogram plane
watermarks, so this requires taking into account
old plane state's do_async_flip flag.
v2: - Removed redundant new_plane_state->do_async_flip
check from needs_async_flip_wm_override condition
(Ville Syrjälä)
- Extract dg2_async_flip_optimization to separate
function(Ville Syrjälä)
- Check for plane->async_flip instead of plane_id
(Ville Syrjälä)
v3: - Rename "needs_async_flip_wm_override" to
"intel_plane_do_async_flip" and move all the required
checks there (Ville Syrjälä)
- Rename "dg2_async_flip_optimization" to
"use_minimal_wm0_only" (Ville Syrjälä)
v4: - Swap new/old_crtc_state in intel_plane_do_async_flip
argument list(Ville Syrjälä)
- Use plane->base.dev to grab i915 pointer in
intel_plane_do_async_flip(Ville Syrjälä)
- Remove const modifier from plane parameter in
use_minimal_wm0_only(Ville Syrjälä)
- Swap also new/old_crtc_state at intel_plane_do_async_flip
call site(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124094929.31722-1-stanislav.lisovskiy@intel.com
There might be various logical contructs when we might want
to enable async flip, so lets calculate those and set this
flag, so that there is no need in long conditions in other
places.
v2: - Set do_async_flip flag to False, if no async flip needed.
Lets not rely that it will be 0-initialized, but set
explicitly, so that the logic is clear as well.
v3: - Clear do_async_flip in intel_plane_duplicate_state(Ville Syrjälä)
- Check with do_async_flip also when calling
intel_crtc_{enable,disable}_flip_done(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124090653.14547-3-stanislav.lisovskiy@intel.com
Complete the ilk pch modeset abstraction by adding ilk_pch_pre_enable().
I did the disable vs. post_disable split already for the disable
sequence, but the enable sequence was still left with the naked
ilk_fdi_pll_enable() call for some reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124193136.2397-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Gather some intel_dump_cdclk_config() changes together to avoid extra
churn: Rename to intel_cdclk_dump_config() to following naming
conventions. Pass in i915. Use i915 for struct drm_device based
logging. Switch to KMS drm debug class.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80469a83a74912ad69c4518d9cc68f07d65e9aaf.1642769982.git.jani.nikula@intel.com
Use REG_BIT() & co. for the pre-skl primary plane registers.
Also give everything a consistent namespace.
v2: s/DSP/DISP/ to avoid confusion (José)
Use DISP_WIDTH rather than DISP_POS_X for DSPSIZE (José)
Deal with gvt
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121113036.23240-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-4-andi.shyti@linux.intel.com
drm/i915 feature pull #2 for v5.17:
Features and functionality:
- Add eDP privacy screen support (Hans)
- Add Raptor Lake S (RPL-S) support (Anusha)
- Add CD clock squashing support (Mika)
- Properly support ADL-P without force probe (Clint)
- Enable pipe color support (10 bit gamma) for display 13 platforms (Uma)
- Update ADL-P DMC firmware to v2.14 (Madhumitha)
Refactoring and cleanups:
- More FBC refactoring preparing for multiple FBC instances (Ville)
- Plane register cleanups (Ville)
- Header refactoring and include cleanups (Jani)
- Crtc helper and vblank wait function cleanups (Jani, Ville)
- Move pipe/transcoder/abox masks under intel_device_info.display (Ville)
Fixes:
- Add a delay to let eDP source OUI write take effect (Lyude)
- Use div32 version of MPLLB word clock for UHBR on SNPS PHY (Jani)
- Fix DMC firmware loader overflow check (Harshit Mogalapalli)
- Fully disable FBC on FIFO underruns (Ville)
- Disable FBC with double wide pipe as mutually exclusive (Ville)
- DG2 workarounds (Matt)
- Non-x86 build fixes (Siva)
- Fix HDR plane max width for NV12 (Vidya)
- Disable IRQ for selftest timestamp calculation (Anshuman)
- ADL-P VBT DDC pin mapping fix (Tejas)
Merges:
- Backmerge drm-next for privacy screen plumbing (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ee6f5h9u.fsf@intel.com
Add support for eDP panels with a built-in privacy screen using the
new drm_privacy_screen class.
Changes in v3:
- Move drm_privacy_screen_get() call to intel_ddi_init_dp_connector()
Changes in v2:
- Call drm_connector_update_privacy_screen() from
intel_enable_ddi_dp() / intel_ddi_update_pipe_dp() instead of adding a
for_each_new_connector_in_state() loop to intel_atomic_commit_tail()
- Move the probe-deferral check to the intel_modeset_probe_defer() helper
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-11-hdegoede@redhat.com
The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.
Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com
There's no need to store all this stuff in intel_fbc_state_cache.
Just check it all against the plane/crtc states and store only
what we need. Probably more should get nuked still, but this
is a start.
So what we'll do is:
- each plane will check its own state and update its local
no_fbc_reason
- the per-plane no_fbc_reason (if any) then gets propagated
to the cache->no_fbc_reason while doing the actual update
- fbc->no_fbc_reason gets updated in the end with either
the value from the cache or directly from frontbuffer
tracking
It's still a bit messy, but should hopefuly get cleaned up
more in the future. At least now we can observe each plane's
reasons for rejecting FBC now more consistently, and we don't
have so mcuh redundant state store all over the place.
v2: store no_fbc_reason per-plane instead of per-pipe
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
This workaround is documented a bit strangely in the bspec; it's listed
as an A0 workaround, but the description clarifies that the workaround
is implicitly handled by the hardware and what the driver really needs
to do is program a chicken bit to reenable some internal behavior.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-3-matthew.d.roper@intel.com
With both integrated and discrete Intel GPUs in a system, the current
global check of intel_iommu_gfx_mapped, as done from intel_vtd_active()
may not be completely accurate.
In this patch we add i915 parameter to intel_vtd_active() in order to
prepare it for multiple GPUs and we also change the check away from Intel
specific intel_iommu_gfx_mapped (global exported by the Intel IOMMU
driver) to probing the presence of IOMMU on a specific device using
device_iommu_mapped().
This will return true both for IOMMU pass-through and address translation
modes which matches the current behaviour. If in the future we wanted to
distinguish between these two modes we could either use
iommu_get_domain_for_dev() and check for __IOMMU_DOMAIN_PAGING bit
indicating address translation, or ask for a new API to be exported from
the IOMMU core code.
v2:
* Check for dmar translation specifically, not just iommu domain. (Baolu)
v3:
* Go back to plain "any domain" check for now, rewrite commit message.
v4:
* Use device_iommu_mapped. (Robin, Baolu)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126141424.493753-1-tvrtko.ursulin@linux.intel.com
Rather than stealing bits from i915_sw_fence function pointer use
separate fields for function pointer and flags. If using two different
fields, the 4 byte alignment for the i915_sw_fence function pointer can
also be dropped.
v2:
(CI)
- Set new function field rather than flags in __i915_sw_fence_init
v3:
(Tvrtko)
- Remove BUG_ON(!fence->flags) in reinit as that will now blow up
- Only define fence->flags if CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is
defined
v4:
- Rebase, resend for CI
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116194929.10211-1-matthew.brost@intel.com
TileF(Tile4 in bspec) format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Fixed wrong case condition(Jani Nikula)
- Increased I915_FORMAT_MOD_F_TILED up to 12(Imre Deak)
v3: - s/I915_TILING_F/TILING_4/g
- s/I915_FORMAT_MOD_F_TILED/I915_FORMAT_MOD_4_TILED/g
- Removed unneeded fencing code
v4: - Rebased, fixed merge conflict with new table-oriented
format modifier checking(Stan)
- Replaced the rest of "Tile F" mentions to "Tile 4"(Stan)
v5: - Still had to remove some Tile F mentionings
- Moved has_4tile from adlp to DG2(Ramalingam C)
- Check specifically for DG2, but not the Display13(Imre)
v6: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v7: - Fixed display_ver to { 13, 13 }(Imre Deak)
- Removed redundant newline(Imre Deak)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122211420.31584-1-stanislav.lisovskiy@intel.com
After a non-blocking modeset on a TypeC port's CRTC - possibly blocked
later in drm_atomic_helper_wait_for_dependencies() - a fastset on the
same CRTC may copy the state of CRTC before this gets updated to reflect
the up-to-date DP-alt vs. TBT-alt TypeC mode DPLL used for the CRTC. In
this case after the first (non-blocking) commit completes enabling the
DPLL required for the up-to-date TypeC mode the following fastset will
update the CRTC state pointing to the wrong DPLL. A subsequent disabling
modeset will try to disable the wrong PLL, triggering a state checker
WARN (and leaving the DPLL which is actually used active for good).
Fix the above race by copying the DPLL state for fastset CRTCs from the
old CRTC state at the point where it's guaranteed to be up-to-date
already. This could be handled in the encoder's update_prepare() hook as
well, but that's a bigger change, which is better done as a follow-up.
v2: Copy dpll_hw_state as well. (Ville)
Testcase: igt/kms_busy/extended-modeset-hang-newfb-with-reset
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4308
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211115181121.156197-1-imre.deak@intel.com
With multiple fbc instances we need to find the right one for each
plane. Rather than going looking for the right instance every time
let's just replace the has_fbc boolean with a pointer that gets us
there straight away.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104144520.22605-18-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
In preparation for multiple FBC instances start passing around
intel_fbc pointers rather than i915 pointers. And once there are
multiple of these we can't rely on container_of() to get back to
the i915, so we toss in a fbc->i915 pointer already.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104144520.22605-17-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
The pipe gamma registers are single buffered so they should only
be updated during the vblank to avoid screen tearing. In fact they
really should only be updated between start of vblank and frame
start because that is the only time the pipe is guaranteed to be
empty. Already at frame start the pipe begins to fill up with
data for the next frame.
Unfortunately frame start happens ~1 scanline after the start
of vblank which in practice doesn't always leave us enough time to
finish the gamma update in time (gamma LUTs can be several KiB of
data we have to bash into the registers). However we must try our
best and so we'll add a vblank work for each pipe from where we
can do the gamma update. Additionally we could consider pushing
frame start forward to the max of ~4 scanlines after start of
vblank. But not sure that's exactly a validated configuration.
As it stands the ~100 first pixels tend to make it through with
the old gamma values.
Even though the vblank worker is running on a high prority thread
we still have to contend with C-states. If the CPU happens be in
a deep C-state when the vblank interrupt arrives even the irq
handler gets delayed massively (I've observed dozens of scanlines
worth of latency). To avoid that problem we'll use the qos mechanism
to keep the CPU awake while the vblank work is scheduled.
With all this hooked up we can finally enjoy near atomic gamma
updates. It even works across several pipes from the same atomic
commit which previously was a total fail because we did the
gamma updates for each pipe serially after waiting for all
pipes to have latched the double buffered registers.
In the future the DSB should take over this responsibility
which will hopefully avoid some of these issues.
Kudos to Lyude for finishing the actual vblank workers.
Works like the proverbial train toilet.
v2: Add missing intel_atomic_state fwd declaration
v3: Clean up properly when not scheduling the worker
v4: Clean up the rest and add tracepoints
v5: s/intel_wait_for_vblank_works/intel_wait_for_vblank_workers/ (Jani,Uma)
CC: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020223339.669-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
So far the remapped view size in GTT/DPT was padded to the next aligned
offset unnecessarily after the last color plane with an unaligned size.
Remove the unnecessary padding.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-3-imre.deak@intel.com
(cherry picked from commit 6b6636e176)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The amount of plane registers we have to write has been steadily
increasing, putting more pressure on the vblank evasion mechanism
and forcing us to increase its time budget. Let's try to take some
of the pressure off by splitting plane updates into two parts:
1) write all non-self arming plane registers, ie. the registers
where the write actually does nothing until a separate arming
register is also written which will cause the hardware to latch
the new register values at the next start of vblank
2) write all self arming plane registers, ie. registers which always
just latch at the next start of vblank, and registers which also
arm other registers to do so
Here we just provide the mechanism, but don't actually implement
the split on any platform yet. so everything stays now in the _arm()
hooks. Subsequently we can move a whole bunch of stuff into the
_noarm() part, especially in more modern platforms where the number
of registers we have to write is also the greatest. On older
platforms this is less beneficial probably, but no real reason
to deviate from a common behaviour.
And let's sprinkle some TODOs around the areas that will need
adapting.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Async flips are only capable of changing PLANE_SURF, hence we
they can't easily be used with planar formats.
Older platforms could require updating AUX_DIST as well, which
is not possible. We'd have to make sure AUX_DIST doesn't change
before allowing the async flip through. If we could get async
flips with CCS then that might be interesting, but since the hw
doesn't allow async flips with CCS I don't see much point in
allowing this for planar formats either. No one renders their
game content in YUV anyway.
icl+ could in theory do this I suppose since each color plane
has its own PLANE_SURF register, but I don't know if there is
some magic to guarantee that both the Y and UV plane would
async flip synchronously if you will. Ie. beyond just a clean
tear we'd potentially get some kind of weird tear with some
random mix of luma and chroma from the old and new frames.
So let's just say no to async flips when scanning out planar
formats.
Cc: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018115030.3547-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The next patch needs to distinguish between a view's mapping and scanout
stride. Rename the current stride parameter to mapping_stride with the
script below. mapping_stride will keep the same meaning as stride had
on all platforms so far, while the meaning of it will change on ADLP.
No functional changes.
@@
identifier intel_fb_view;
identifier i915_color_plane_view;
identifier color_plane;
expression e;
type T;
@@
struct intel_fb_view {
...
struct i915_color_plane_view {
...
- T stride;
+ T mapping_stride;
...
} color_plane[e];
...
};
@@
struct i915_color_plane_view pv;
@@
pv.
- stride
+ mapping_stride
@@
struct i915_color_plane_view *pvp;
@@
pvp->
- stride
+ mapping_stride
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-6-imre.deak@intel.com
During remapping CCS FBs the CCS AUX surface mapped size and offset->x,y
coordinate calculations assumed a tiled layout. This works as long as
the CCS surface height is aligned to 64 lines (ensuring a 4k bytes CCS
surface tile layout). However this alignment is not required by the HW
(and the driver doesn't enforces it either).
Add the remapping logic required to remap the pages of CCS surfaces
without the above alignment, assuming the natural linear layout of the
CCS surface (vs. tiled main surface layout).
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-5-imre.deak@intel.com
So far the remapped view size in GTT/DPT was padded to the next aligned
offset unnecessarily after the last color plane with an unaligned size.
Remove the unnecessary padding.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Fixes: 3d1adc3d64 ("drm/i915/adlp: Add support for remapping CCS FBs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-3-imre.deak@intel.com
For every crtc in state, intel_atomic_check_async() was checking all
the crtc and plane states again.
v2: comparing pipe ids instead of crtc pointers when iterating over
planes
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029202432.140745-1-jose.souza@intel.com
Try to make bigjoiner pipes less special.
The main things here are that each pipe now does full
clock computation/readout with its own shared_dpll reference.
Also every pipe's cpu_transcoder always points correctly
at the master transcoder.
Due to the above changes state readout is now complete
and all the related hacks can go away. The actual modeset
sequence code is still a mess, but I think in order to clean
that up properly we're probably going to have to redesign
the modeset logic to treat transcoders vs. pipes separately.
That is going to require significant amounts of work.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-9-ville.syrjala@linux.intel.com
The PPS SDP is fed into the transcoder whereas the DSC
block is (or at least can be) per pipe. Let's split these
into two distinct operations in an effort to untagle the
bigjoiner mess where we have two pipes feeding a single
transcoder.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-7-ville.syrjala@linux.intel.com
Let's disable planes on all pipes affected by the modeset before
we start doing the actual modeset. This means we have less
random planes enabled during the modeset, and it also mirrors
what we already do when enabling pipes on skl+ since we enable
planes on all pipes as the very last step. As a bonus we also
nuke a bunch og bigjoiner special casing.
I've occasionally pondered about going even furher here and
doing the pre_plane_update() stuff for all pipes first, then
actually disabling the planes, and finally running the rest
of the modeset sequence. This would potentially allow
parallelizing all the extra vblank waits across multiple pipes,
and would make the plane disable even more atomic. But let's
go one step a time here.
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Disabling planes in the middle of the modeset seuqnece does not make
sense since userspace can anyway disable planes before the modeset
even starts. So when the modeset seuqence starts the set of enabled
planes is entirely arbitrary. Trying to sprinkle the plane disabling
into the modeset sequence just means more randomness and potential
for hard to reproduce bugs.
So it makes most sense to just disable all planes first so that the
rest of the modeset sequence remains identical regardless of which
planes happen to be enabled by userspace at the time.
This reverts commit 84030adb9e.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
PSR2 apparently requires some planes to be enabled for some
silly reason, and so we are now trying to turn PSR off before
planes go off. Except during a full modeset that is handled
less clearly through reorganization of the modeset sequence.
That is not great as it makes the code mode complex, and
prevents us from doing nice things such as just turning off
all the planes at the very start of the modeset. So let's
move the PSR pre_plane_update() thing to a spot where it
will handle both full modesets and everything else.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
On future platforms the index of the color-clear plane will change from
the one used by the GEN12 RC CCS CC modifier, so add a way to retrieve
the index independently of the platform/modifier.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-8-imre.deak@intel.com
Move intel_format_info_is_yuv_semiplanar() to intel_fb.c . The number of
planes for YUV semiplanar formats using CCS modifiers will change on
future platforms. We can use the modifier descriptors to simplify
getting the plane numbers for all modifiers, prepare for that here.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-7-imre.deak@intel.com
Move the function retrieving the format override information for a given
format/modifier to intel_fb.c. We can store a pointer to the format list
in each modifier's descriptor instead of the corresponding switch/case
logic, avoiding the listing of the modifiers twice.
v1: Unchanged.
v2: Handle invalid modifiers in intel_fb_get_format_info() passed from
userspace. (CI/igt_kms_addfb_basic/addfb25-bad-modifier)
v3: Move lookup_modifier() to the next patch, where it's first used.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020195138.1841242-3-imre.deak@intel.com
Hoover the remaining open coded PCH modeset sequence bits
out from ilk_crtc_disable(). Somewhat annoyingly the
enable vs. disable is a bit asymmetric so we need two
functions for the disable case.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-8-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Pull the ilk+ PCH state readout into its own function and relocate
to the appropriate file.
The clock readout parts are perhaps a bit iffy since we depend
on the gmch DPLL readout code. But we can think about the clock
readout big picture later.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-6-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Nuke the hsw_get_ddi_port_state() eyesore by putting the
readout code into intel_pch_display.c, and calling it directly
from hsw_crt_get_config().
Note that the nuked TRANS_DDI_FUNC_CTL readout from
hsw_get_ddi_port_state() is now etirely redundant since we
get called from the encoder->get_config() so we already know
we're dealing with the correct DDI port. Previously the
code was called from a place where that wasn't known so
it had to checked manually.
v2: Clarify the TRANS_DDI_FUNC_CTL change (Dave)
Nuke the now unused *TRANS_DDI_FUNC_CTL_VAL_TO_PORT() (Dave)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018153525.21597-1-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Use the clean "atomic_state+crtc" approach of passing
arguments to the top level PCH modeset code.
And while at it we can also just pass the whole crtc to
ilk_disable_pch_transcoder().
v2: Elimiate double space between function args (Dave)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Start moving the code for PCH modeset sequence/etc. to
its own file.
Still not sure about the file name though...
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
Move the PCH refclk stuff (including all the LPT/WPT
iCLKIP/CLKOUT_DP things) to its own file.
We also suck in the mPHY programming from intel_fdi.c
since we're the only caller.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
No real reason to have this pxp state computation in
intel_atomic_check_planes(). Just stuff it into skl_plane_check().
There was also some funny state copying being done from the
old plane state to the new plane state when the plane is anyway
disabled.
The one thing we presumably must remember to do is copy
over the decrypt state when assigning a Y plane for planar
YCbCr scanout, so that the Y plane's PLANE_SURF will get the
appropriate bit set. The force_black thing should not matter
as I'm pretty sure all that stuff is ignored for the Y plane.
I suppose this was the reason for the odd placement for the
state computation, but I see no reason to deviate from the
standard way of doing these things. This also guarantees
that we don't calculate things differently between the
linked UV and Y plane.
v2: Only do stuff for icl+ since 'force_black' depends
on the plane CSC which is an icl+ feature
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006235704.28894-2-ville.syrjala@linux.intel.com
Reviewed-by: Juston Li <juston.li@intel.com> #v1
The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.
Code movement only.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com
The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].
Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com
Need to resync drm-intel-next with TTM and PXP stuff from
drm-intel-gt-next that is now in drm/drm-next.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
UAPI Changes:
- Add uAPI for using PXP protected objects
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064
- Add PCI IDs and LMEM discovery/placement uAPI for DG1
Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584
- Disable engine bonding on Gen12+ except TGL, RKL and ADL-S
Cross-subsystem Changes:
- Merges 'tip/locking/wwmutex' branch (core kernel tip)
- "mei: pxp: export pavp client to me client bus"
Core Changes:
- Update ttm_move_memcpy for async use (Thomas)
Driver Changes:
- Enable GuC submission by default on DG1 (Matt B)
- Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele,
Sean, Anshuman)
See "drm/i915/pxp: add PXP documentation" for details!
- Remove force_probe protection for ADL-S (Raviteja)
- Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas)
- Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko)
- Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris)
- Implement LMEM backup and restore for suspend / resume (Thomas)
- Report INSTDONE_GEOM values in error state for DG2 (Matt R)
- Add DG2-specific shadow register table (Matt R)
- Update Gen11/Gen12/XeHP shadow register tables (Matt R)
- Maintain backward-compatible nested batch behavior on TGL+ (Matt R)
- Add new LRI reg offsets for DG2 (Akeem)
- Initialize unused MOCS entries to device specific values (Ayaz)
- Track and use the correct UC MOCS index on Gen12 (Ayaz)
- Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz)
- Simplify the locking and eliminate some RCU usage (Daniel)
- Add some flushing for the 64K GTT path (Matt A)
- Mark GPU wedging on driver unregister unrecoverable (Janusz)
- Major rework in the GuC codebase, simplify locking and add docs (Matt B)
- Add DG1 GuC/HuC firmwares (Daniele, Matt B)
- Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A)
- Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R)
- Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel)
- Fix early tracepoints for requests (Matt A)
- Use locked access to ctx->engines in set_priority (Daniel)
- Convert gen6/gen7/gen8 read operations to fwtable (Matt R)
- Drop gen11/gen12 specific mmio write handlers (Matt R)
- Drop gen11 specific mmio read handlers (Matt R)
- Use designated initializers for init/exit table (Kees)
- Fix syncmap memory leak (Matt B)
- Add pretty printing for buddy allocator state debug (Matt A)
- Fix potential error pointer dereference in pinned_context() (Dan)
- Remove IS_ACTIVE macro (Lucas)
- Static code checker fixes (Nathan)
- Clean up disabled warnings (Nathan)
- Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B)
- Ensure wa_init_finish() is called for ctx workaround list (Matt R)
- Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram)
- Get PM ref before accessing HW register (Vinay)
- Move __i915_gem_free_object to ttm_bo_destroy (Maarten)
- Deduplicate frequency dump on debugfs (Lucas)
- Make wa list per-gt (Venkata)
- Do not define dummy vma in stack (Venkata)
- Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas)
- Do not report currently active engine when describing objects (Tvrtko)
- Fix pdfdocs build error by removing nested grid from GuC docs (Akira)
- Remove false warning from the rps worker (Tejas)
- Flush buffer pools on driver remove (Janusz)
- Fix runtime pm handling in i915_gem_shrink (Maarten)
- Rework TTM object initialization slightly (Thomas)
- Use fixed offset for PTEs location (Michal Wa)
- Verify result from CTB (de)register action and improve error messages (Michal Wa)
- Fix bug in user proto-context creation that leaked contexts (Matt B)
- Re-use Gen11 forcewake read functions on Gen12 (Matt R)
- Make shadow tables range-based (Matt R)
- Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten)
- Use NULL instead of 0 where appropriate (Ville)
- Rename pci/debugfs functions to respect file prefix (Jani, Lucas)
- Drop guc_communication_enabled (Daniele)
- Selftest fixes (Thomas, Daniel, Matt A, Maarten)
- Clean up inconsistent indenting (Colin)
- Use direction definition DMA_BIDIRECTIONAL instead of
PCI_DMA_BIDIRECTIONAL (Cai)
- Add "intel_" as prefix in set_mocs_index() (Ayaz)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since the VT-d vs. async flip issues are plaguing a wider range
of supported hw let's try to minimize the impact on normal
operation by flipping the relevant chicken bits on and off
as needed. I presume there is some power/perf impact on since
this is reducing some prefetching I think.
Cc: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
When protected sufaces has flipped and pxp session is disabled,
display black pixels by using plane color CTM correction.
v2:
- Display black pixels in async flip too.
v3:
- Removed the black pixels logic for async flip. [Ville]
- Used plane state to force black pixels. [Ville]
v4 (Daniele): update pxp_is_borked check.
v5: rebase on top of v9 plane decryption moving the decrypt check
(Juston)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gaurav Kumar <kumar.gaurav@intel.com>
Cc: Shankar Uma <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-15-alan.previn.teres.alexis@intel.com
Add support to enable/disable PLANE_SURF Decryption Request bit.
It requires only to enable plane decryption support when following
condition met.
1. PXP session is enabled.
2. Buffer object is protected.
v2:
- Used gen fb obj user_flags instead gem_object_metadata. [Krishna]
v3:
- intel_pxp_gem_object_status() API changes.
v4: use intel_pxp_is_active (Daniele)
v5: rebase and use the new protected object status checker (Daniele)
v6: used plane state for plane_decryption to handle async flip
as suggested by Ville.
v7: check pxp session while plane decrypt state computation. [Ville]
removed pointless code. [Ville]
v8 (Daniele): update PXP check
v9: move decrypt check after icl_check_nv12_planes() when overlays
have fb set (Juston)
v10 (Daniele): update PXP check again to match rework in earlier
patches and don't consider protection valid if the object has not
been used in an execbuf beforehand.
Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Huang Sean Z <sean.z.huang@intel.com>
Cc: Gaurav Kumar <kumar.gaurav@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v9
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-14-alan.previn.teres.alexis@intel.com
While sanitizing the hardware state we're currently forcing
the pipe bottom color legacy csc/gamma bits on. That is not a
good idea as BIOSen are likely to leave gabage in the LUTs and
so doing this causes ugly visual glitches if and when the
planes covering the background get disabled. This was exactly
the case on this Dell Precision 5560 tgl laptop.
On icl+ we don't normally even use these legacy bits
anymore and instead use their GAMMA_MODE counterparts.
On earlier platforms the bits are used, but we still
shouldn't force them on without knowing what's in the LUT.
So two options, get rid of the whole thing, or do what
intel_color_commit() does to make sure the bottom color state
matches whatever out hardware readout produced. I chose the
latter since it'll match what happens on older platforms when
the primary plane gets turned off. In fact let's just call
intel_color_commit(). It'll also do some CSC programming but
since we don't have readout for that it'll actually just set
to all zeros. So in the unlikely case of CSC actually being
enabld by the BIOS we'll end up with all black until the first
atomic commit happens.
Still not totally sure what we should do about color management
features here in general. Probably the safest thing would be to
force everything off exactly at the same time when we disable
the primary plane as there is no guarantees that whatever the
LUTs/CSCs contain make any sense whatsoever without the
specific pixel data in the BIOS fb. And if we preserve the
primary plane then we should disable the color management
features exactly when the primary plane fb contents first
changes since the new content assumes more or less no
transformations. But of course synchronizing front buffer
rendering with anything else is a bit hard...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3534
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928185105.3030-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
"CRTC fixup failed" is probably leftovers from pre-atomic days
when there was an actual fixup() function. Let's unify the debug
messages between encoder vs. crtc compute_config() calls.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930104133.30854-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move assert_panel_unlocked() to intel_pps.c and rename
assert_pps_unlocked(). Keep the functionality and the assert code
together.
There's still a bit of a split between the eDP PPS usage in intel_pps.c
and all the other PPS usage, and assert_pps_unlocked() is arguably more
related to the latter. However, intel_pps.c is the best fit for anything
touching the PPS registers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a9b77692a145891789eefb0447e082cfc22aaa85.1632992608.git.jani.nikula@intel.com
This unnecessary flushes are hurting power-savings are it causes
features like PSR, FBC and DRRS to disable it self to handle
frontbuffer rendering, below some explanation of why each removed
call is not necessary.
The flush in intel_prepare_plane_fb() is not required as framebuffer
will be flipped and power-saving features do the proper flip handling
in hardware.
intel_find_initial_plane_obj() flush is not required because it is
only executed during driver load and at this point the power-saving
features are not even enabled.
And the last one intelfb_create(), is also not required as at this
point the fbdev was just allocated, userspace will draw on
it what will trigger frontbuffer invalidates and flushes later on.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930001409.254817-3-jose.souza@intel.com
Let's not configure the single transcoder's TRANSCONF multiple
times with bigjoiner. No real harm I suppose but since we already
have the bigjoiner if statement directly above might as well suck
this in there and skip the redundant programming.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Adjust the HSW+ transcoder state readout to just read through
all the possible transcoders for the pipe, and stuff the results
in a bitmask.
We can conveniently cross check the bitmask for invalid
combinations of enabled transcoders, and later we can easily
extend the bitmask readout to handle the bigjoiner case.
One slight change in behaviour is that we no longer read out
the AONOFF->force_pfit.pfit bit for all the enabled "panel
transcoders". But having more than one enabled would anyway
be illegal so no big loss. Also the AONOFF selection should
only ever be used on HSW, which only has the EDP transcoder
an no DSI transcoders.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Instead of directly accessing the TypeC port internal struct members,
add/use helpers to retrieve the corresponding properties.
No functional change.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-6-imre.deak@intel.com
Atm during driver loading and system resume TypeC ports are accessed
before their HW/SW state is synced. Move the TypeC port sanitization to
the encoder's sync_state hook to fix this.
v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well
(Jose, Jani)
Fixes: f9e76a6e68 ("drm/i915: Add an encoder hook to sanitize its state during init/resume")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com
Display underrun in HDR mode when cursor is enabled.
RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
As per W/A 1604331009, Disable cursor clock gating in HDR mode.
Bspec : 33451
Changes since V6:
- Address checkpatch warnings
- Bit ordering
Changes since V5:
- replace intel_de_read with intel_de_rmw - Jani
Changes since V4:
- Added WA needed check - Ville
- Replace BIT with REG_BIT - Ville
- Add WA enable/disable support back which was
added in V1 - Ville
Changes since V3:
- Disable WA when not in HDR mode or cursor plane
not active - Ville
- Extract required args from crtc_state - Ville
- Create HDR mode API using bdw_set_pipemisc ref - Ville
- Tested with HDR video as well full setmode, WA
applies and disables
Changes since V2:
- Made it general gen11 WA
- Removed WA needed check
- Added cursor plane active check
- Once WA enable, software will not disable
Changes since V1:
- Modified way CLKGATE_DIS_PSL bit 28 was modified
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929052442.2543054-1-tejaskumarx.surendrakumar.upadhyay@intel.com
This moves one wrapper from the pm->display side, and creates
wrappers for all the others, this should simplify things later.
One thing to note is that the code checks the existence of some
of these ptrs, so the wrappers are a bit complicated by that.
Suggested by Jani.
v2: fixup warnings in wrong place error.
v3 by Jani: fix intel_compute_global_watermarks() return value check
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee2760c45896568c9dd9114a575509619bd44ef2.1632869550.git.jani.nikula@intel.com
PSR always had a requirement to only be enabled if there is active
planes but not following that never caused any issues.
But that changes in Alderlake-P, leaving PSR enabled without
active planes causes transcoder/port underruns.
Similar behavior was fixed during the pipe disable sequence by
commit 84030adb9e ("drm/i915/display: Disable audio, DRRS and PSR before planes").
intel_dp_compute_psr_vsc_sdp() had to move from
intel_psr_enable_locked() to intel_psr_compute_config() because we
need to be able to disable/enable PSR from atomic states without
connector and encoder state.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-3-jose.souza@intel.com
We were not completely following the selective fetch programming
sequence, here some things we were doing wrong:
- not programming plane selective fetch a PSR2_MAN_TRK_CTL registers
when doing a modeset
- programming PSR2_MAN_TRK_CTL out of vblank
With this changes the last remainig underrun found in Alderlake-P is
fixed.
Bspec: 55229
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-2-jose.souza@intel.com
Add support for remapping CCS FBs on ADL-P to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
We can only remap the tiles on the main surface, not the tiles on the
CCS surface, so userspace has to generate the CCS surface aligning to
the POT size padded main surface stride (by programming the AUX
pagetable accordingly). For the required AUX pagetable setup, this
requires that either the main surface stride is 8 tiles or that the
stride is 16 tiles aligned (= 64 kbytes, the area mapped by one AUX
PTE).
v2:
- Init intel_remapped_info::plane_alignment only for remapped views and
do this from intel_fb_view_init().
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-6-imre.deak@intel.com
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.
I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On Intel platforms we know that the ACPI connector device
node order will follow the order the driver (i915) decides.
The decision is made using the custom Intel ACPI OpRegion
(intel_opregion.c), though the driver does not actually know
that the values it sends to ACPI there are used for
associating a device node for the connectors, and assigning
address for them.
In reality that custom Intel ACPI OpRegion actually violates
ACPI specification (we supply dynamic information to objects
that are defined static, for example _ADR), however, it
makes assigning correct connector node for a connector entry
straightforward (it's one-on-one mapping).
Changes in v2 (Hans de goede):
- Take a reference on the fwnode which we assign to the connector,
for ACPI nodes this is a no-op but in the future we may see
software-fwnodes assigned to connectors which are ref-counted.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210817215201.795062-6-hdegoede@redhat.com
Frontbuffer rendering will be dropped for modern platforms but
before that we to prepare DRRS for it.
intel_drrs_flush and intel_drrs_invalidate will not be called
for platforms that will not support frontbuffer rendering so DRRS
needs another way to be notified about to page flips so it can change
between high and low refresh rates as needed.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903221036.34770-3-jose.souza@intel.com
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t
-----BEGIN PGP SIGNATURE-----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=vZkA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- i915 has seen a lot of refactoring and uAPI cleanups due to a
change in the upstream direction going forward
This has all been audited with known userspace, but there may be
some pitfalls that were missed.
- i915 now uses common TTM to enable discrete memory on DG1/2 GPUs
- i915 enables Jasper and Elkhart Lake by default and has preliminary
XeHP/DG2 support
- amdgpu adds support for Cyan Skillfish
- lots of implicit fencing rules documented and fixed up in drivers
- msm now uses the core scheduler
- the irq midlayer has been removed for non-legacy drivers
- the sysfb code now works on more than x86.
Otherwise the usual smattering of stuff everywhere, panels, bridges,
refactorings.
Detailed summary:
core:
- extract i915 eDP backlight into core
- DP aux bus support
- drm_device.irq_enabled removed
- port drivers to native irq interfaces
- export gem shadow plane handling for vgem
- print proper driver name in framebuffer registration
- driver fixes for implicit fencing rules
- ARM fixed rate compression modifier added
- updated fb damage handling
- rmfb ioctl logging/docs
- drop drm_gem_object_put_locked
- define DRM_FORMAT_MAX_PLANES
- add gem fb vmap/vunmap helpers
- add lockdep_assert(once) helpers
- mark drm irq midlayer as legacy
- use offset adjusted bo mapping conversion
vgaarb:
- cleanups
fbdev:
- extend efifb handling to all arches
- div by 0 fixes for multiple drivers
udmabuf:
- add hugepage mapping support
dma-buf:
- non-dynamic exporter fixups
- document implicit fencing rules
amdgpu:
- Initial Cyan Skillfish support
- switch virtual DCE over to vkms based atomic
- VCN/JPEG power down fixes
- NAVI PCIE link handling fixes
- AMD HDMI freesync fixes
- Yellow Carp + Beige Goby fixes
- Clockgating/S0ix/SMU/EEPROM fixes
- embed hw fence in job
- rework dma-resv handling
- ensure eviction to system ram
amdkfd:
- uapi: SVM address range query added
- sysfs leak fix
- GPUVM TLB optimizations
- vmfault/migration counters
i915:
- Enable JSL and EHL by default
- preliminary XeHP/DG2 support
- remove all CNL support (never shipped)
- move to TTM for discrete memory support
- allow mixed object mmap handling
- GEM uAPI spring cleaning
- add I915_MMAP_OBJECT_FIXED
- reinstate ADL-P mmap ioctls
- drop a bunch of unused by userspace features
- disable and remove GPU relocations
- revert some i915 misfeatures
- major refactoring of GuC for Gen11+
- execbuffer object locking separate step
- reject caching/set-domain on discrete
- Enable pipe DMC loading on XE-LPD and ADL-P
- add PSF GV point support
- Refactor and fix DDI buffer translations
- Clean up FBC CFB allocation code
- Finish INTEL_GEN() and friends macro conversions
nouveau:
- add eDP backlight support
- implicit fence fix
msm:
- a680/7c3 support
- drm/scheduler conversion
panfrost:
- rework GPU reset
virtio:
- fix fencing for planes
ast:
- add detect support
bochs:
- move to tiny GPU driver
vc4:
- use hotplug irqs
- HDMI codec support
vmwgfx:
- use internal vmware device headers
ingenic:
- demidlayering irq
rcar-du:
- shutdown fixes
- convert to bridge connector helpers
zynqmp-dsub:
- misc fixes
mgag200:
- convert PLL handling to atomic
mediatek:
- MT8133 AAL support
- gem mmap object support
- MT8167 support
etnaviv:
- NXP Layerscape LS1028A SoC support
- GEM mmap cleanups
tegra:
- new user API
exynos:
- missing unlock fix
- build warning fix
- use refcount_t"
* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
drm/amd/display: Remove duplicate dml init
drm/amd/display: Update bounding box states (v2)
drm/amd/display: Update number of DCN3 clock states
drm/amdgpu: disable GFX CGCG in aldebaran
drm/amdgpu: Clear RAS interrupt status on aldebaran
drm/amdgpu: Add support for RAS XGMI err query
drm/amdkfd: Account for SH/SE count when setting up cu masks.
drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
drm/amdgpu: drop redundant cancel_delayed_work_sync call
drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
drm/amdkfd: map SVM range with correct access permission
drm/amdkfd: check access permisson to restore retry fault
drm/amdgpu: Update RAS XGMI Error Query
drm/amdgpu: Add driver infrastructure for MCA RAS
drm/amd/display: Add Logging for HDMI color depth information
drm/amd/amdgpu: consolidate PSP TA init shared buf functions
drm/amd/amdgpu: add name field back to ras_common_if
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
...
Enable MIPI DSI support on ADL-P platform.
The esc clock changes, WA changes are taken care
in the previous patches.
As per the Bspec the seq remains to be same as TGL.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826054811.10572-3-vandita.kulkarni@intel.com
Apparently the last reader of i915->active_pipes was removed with commit
ef79d62b5c ("drm/i915: Encapsulate dbuf state handling harder"), and
now it's only ever written to. Remove it completely.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826141830.889-1-jani.nikula@intel.com
The current gen2 DPLL readout code:
* assumes i845/i865 have LVDS which is not true
* assumes only pipe B can drive LVDS (true, but makes
the code appear a bit magical)
* hard to parse in general
Clean it up by checking for i85x (the only gen2 platform
with LVDS) and reusing intel_lvds_port_enabled().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715093530.31711-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
One of the cases that the bspec lists for when underrun recovery must be
disabled is "COG;" that note actually refers to eDP multi-segmented
operation (MSO). Let's ensure the this additional restriction is
honored by the driver.
Bspec: 50351
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: ba3b049f47 ("drm/i915/adl_p: Allow underrun recovery when possible")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c00e14cd4d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One of the cases that the bspec lists for when underrun recovery must be
disabled is "COG;" that note actually refers to eDP multi-segmented
operation (MSO). Let's ensure the this additional restriction is
honored by the driver.
Bspec: 50351
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: ba3b049f47 ("drm/i915/adl_p: Allow underrun recovery when possible")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffe ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 70418a6871)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
UAPI Changes:
- Add I915_MMAP_OFFSET_FIXED
On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
type. On devices without local memory, this caching mode is invalid.
As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
be used, depending on the object placement on creation. WB will be used
when the object can only exist in system memory, WC otherwise.
Userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11888
- Reinstate the mmap ioctl for (already released) integrated Gen12 platforms
Rationale: Otherwise media driver breaks eg. for ADL-P. Long term goal is
still to sunset the IOCTL even for integrated and require using mmap_offset.
- Reject caching/set_domain IOCTLs on discrete
Expected to become immutable property of the BO
- Disallow changing context parameters after first use on Gen12 and earlier
- Require setting context parameters at creation on platforms after Gen12
Rationale (for both): Allow less dynamic changes to the context to simplify
the implementation and avoid user shooting theirselves in the foot.
- Drop I915_CONTEXT_PARAM_RINGSIZE
Userspace PR for compute-driver has not been merged
- Drop I915_CONTEXT_PARAM_NO_ZEROMAP
Userspace PR for libdrm / Beignet was never landed
- Drop CONTEXT_CLONE API
Userspace PR for Mesa was never landed
- Drop getparam support for I915_CONTEXT_PARAM_ENGINES
Only existed for symmetry wrt. setparam, never used.
- Disallow bonding of virtual engines
Drop the prep work, no hardware has been released needing it.
- (Implicit) Disable gpu relocations
Media userspace was the last userspace to still use them. They
have converted so performance can be regained with an update.
Core Changes:
- Merge topic branch 'topic/i915-ttm-2021-06-11' (from Maarten)
- Merge topic branch 'topic/revid_steppings' (from Matt R)
- Merge topic branch 'topic/xehp-dg2-definitions-2021-07-21' (from Matt R)
- Backmerges drm-next (Rodrigo)
Driver Changes:
- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)
- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)
- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
(Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)
- Document RFC plans for GuC submission, DRM scheduler and new parallel
submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)
- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
Rahul, Vinay)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQ0JmYiXhGskNcrI@jlahtine-mobl.ger.corp.intel.com
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffe ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
Alderlake-P have different values for MBUS DBOX A credits depending
if MBUS join is enabled or not.
BSpec: 50343
BSpec: 54369
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708211827.288601-6-jose.souza@intel.com
CI test results/further experiments show that the workaround added in
commit 573d7ce4f6 ("drm/i915/adlp: Add workaround to disable CMTG clock gating")
can be applied only while DPLL0 is enabled. If it's disabled the
TRANS_CMTG_CHICKEN register is not accessible. Accordingly move the WA
to DPLL0 HW state sanitization and enabling.
This fixes an issue where the WA won't get applied (and a WARN is thrown
due to an unexpected value in TRANS_CMTG_CHICKEN) if the driver is
loaded without DPLL0 being enabled: booting without BIOS enabling an
output with this PLL, or reloading the driver.
While at it also add a debug print for the unexpected register value.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210802190148.2099625-1-imre.deak@intel.com
DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power
well. Adjusting the power domain accordingly to
POWER_DOMAIN_AUDIO_MMIO for audio detection and
POWER_DOMAIN_AUDIO_PLAYBACK for audio playback.
While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO
power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask
and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put}
to enable/disable display audio codec power.
It will save the power in use cases when DP/HDMI connectors
configured with PIPE_A without any audio playback.
v1: Changes since RFC
- changed power domain names. [Imre]
- Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1
power well and PW_3 power domains. [Imre]
- Fixed the order of powe wells , power domains and its
registration. [Imre]
v2:
- Not allowe DC states when AUDIO_MMIO domain enabled. [Imre]
v3:
- Squashes the commits of series to avoid build failure.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
[Fix typo in commit message and in AUDIO_PLAYBACK domain name]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com
Explicit support for CNL is being removed from the driver as it's not
expected to work. Remove the workaround for PORT_F from
display/intel_bios.c so we can also remove the generic DISPLAY_VER == 10
calls to intel_ddi_init(): the only platform with that display version
is already handled separately (GLK).
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-2-lucas.demarchi@intel.com
In verify_mpllb_state() encoder is retrieved from best_encoder
of connector_state. As there will be only one connector_state
for bigjoiner and checking encoder may not be needed for
bigjoiner-slave. This code path related to mpll is done on dg2
and need this fix to avoid null pointer dereference issue.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-30-matthew.d.roper@intel.com
At the moment we don't have a proper algorithm that can be used to
calculate PHY settings for arbitrary HDMI link rates. The PHY tables
here should support the regular modes of real-world HDMI monitors.
Bspec: 54032
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-25-matthew.d.roper@intel.com
DG2's SNPS PHYs incorporate a dedicated port PLL called MPLLB which
takes the place of the shared DPLLs we've used on past platforms. Let's
add the MPLLB programming sequences; they'll be plugged into the rest of
the code in future patches.
Bspec: 54032
Bspec: 53881
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nidhi Gupta <nidhi1.gupta@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-24-matthew.d.roper@intel.com
The driver doesn't depend atm on the common mode timing generator
functionality (it would be used for some power saving feature and panel
timing synchronization), however DMC will corrupt the CMTG registers
across DC5 entry/exit sequences unless the CMTG clock gating is
disabled. This in turn can lead to at least the DPLL0/1 configuration
getting stuck at their last state, which means we can't reprogram them
to a new config.
Add the corresponding Bspec workaround to prevent the above.
v2: Fix checkpatch errors. (CI, Jose)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727134400.101290-1-imre.deak@intel.com
ADL_P requires that we disable underrun recovery when downscaling (or
using the scaler for YUV420 pipe output), using DSC, or using PSR2.
Otherwise we should be able to enable the underrun recovery.
On DG2 we need to keep underrun recovery disabled at all times, but the
chicken bit in PIPE_CHICKEN has an inverted meaning (it's an enable bit
instead of disable).
v2:
- Reverse the condition (clear the disable bit when supported, set
disable bit when not supported).
Bspec: 50351
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727145056.2049720-1-matthew.d.roper@intel.com
HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.
Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.
BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
(cherry picked from commit ec387b8ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond: if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder. The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).
Bspec: 49190, 54128, 55424
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Although the bspec labels four of DG2's outputs as "combo PHY," the
underlying PHYs in both cases are actually Synopsys PHYs that are
programmed completely differently than the traditional Intel "combo" PHY
units. As such, we don't want intel_phy_is_combo to take us down legacy
programming paths, so just return false from it on DG2. Instead add a
new intel_phy_is_snps() that will return true for all DG2 PHYs.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-46-matthew.d.roper@intel.com
DG2 has outputs on DDI A-D attached to what the bspec diagram shows as
"Combo PHY A-D." Note that despite being labelled "combo" the PHYs on
these outputs are Synopsys PHYs rather than traditional Intel combo PHY
technology.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-15-matthew.d.roper@intel.com
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
-----BEGIN PGP SIGNATURE-----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=x8Eo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
Currently when we do the HW state readout, we dont set the shared dpll to NULL
for the bigjoiner slave which should not have a DPLL assigned. So it has
some garbage while the HW state readout is NULL. So explicitly reset
the shared dpll for bigjoiner slave pipe.
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/3465
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714223414.9849-1-manasi.d.navare@intel.com
Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"
Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most of the places are using this format so lets consolidate it.
v2:
- split patch in two: display and non-display because of conflicts
between drm-intel-gt-next x drm-intel-next
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-1-jose.souza@intel.com
Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Objects intended to be used as display framebuffers must reside in
LMEM for discrete. If they happen to not do that, migrate them to
LMEM before pinning.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-4-thomas.hellstrom@linux.intel.com
Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.
Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.
Prefer primary/secondary terminology going forward.
v2:
- Improved abstractions for pipe validity etc.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com
(cherry picked from commit 17203224f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Just pass the full atomic state+crtc to the pre-skl watermark
functions, and clean up the types/variable names around the area.
Note that having both .compute_pipe_wm() and .compute_intermediate_wm()
is entirely redundant now. We could unify them to a single vfunc.
But let's do this one step at a time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.
Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.
Prefer primary/secondary terminology going forward.
v2:
- Improved abstractions for pipe validity etc.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com
Since objects can be migrated or evicted when not pinned or locked,
update the checks for lmem residency or future residency so that
the value returned is not immediately stale.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610070152.572423-3-thomas.hellstrom@linux.intel.com
When PSR is enabled it handles DP_SDP_VSC, changing revision and all
the other fields as necessary.
It can also enabled and disable this SDP as needed without a full
modeset.
So here masking DP_SDP_VSC bit when previous and future state PSR
enabled, it will still be checked when comparing the asked state
to what was programmed to hardware.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
Commit 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware
configuration read out") is not allowing fastsets to happen when PSR
states changes but PSR is a feature that can be enabled and disabled
during fastsets.
So here moving the PSR pipe conf checks to a block that is only
executed when checking if HW state matches with requested state, not
during the phase where it checks if fastset is possible or not.
There still a state mismatch not allowing fastsets between states
turning off or on PSR because of crtc_state->infoframes.enable
BIT(DP_SDP_VSC) but at least for now it will allow a fastset between
PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not
work with PSR2, but the remaning issue will be fixed in a future patch.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 78b772e1a0 ("drm/i915/display: Fill PSR state during hardware configuration read out")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-1-jose.souza@intel.com
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
Implement Wa_22012358565 to avoid underrun with 32bpp cursor
in some high bandwidth scenarios. The implementation calls for
overriding the arbitration slots for the planes.
v2: Fix adlp_plane_ctl_arb_slots() return type
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The FIFO underrun recovery mechanism has a boatload of cases
where it can't be used. The description is also a bit ambiguous
as it doesn't specify whether plane downscaling needs to be considered
or just pipe downscaling. We may not even have sufficient state
tracking to decide this on demand, so for now just disable the
whole thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The kernel prefers enabling fbc over the initial fb, since this leads to
actual runtime power savings, so if the initial fb is deemed too big
using some heuristic, then we simply skip allocating stolen for it.
However if the kernel is not configured with fbcon then it should be
possible to relax this, since unlike with fbcon the display server
shouldn't preserve it when later replacing it, and so we should be able
to re-use the stolen memory for fbc and friends. This patch is reported
to fix some flicker seen during boot splash on some devices.
v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526124901.245689-1-matthew.auld@intel.com
On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield
replacing the pipeline full and deprecating the pipeline override
bit.
This patch adds this corresponding bitfield in the register defs,
crtc state vrr structure and populates this in vrr compute
config and vrr enable functions. It also adds the corresponding
HW state readout for this field.
Bspec: 50508
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmClYcoACgkQ+mJfZA7r
E8oXBwf/Rfb8o/4WZeoc3vxtFlWenA/9QJA2Xs4ui6U3vJScpaHFLq5Ki6aOSxIO
WudQvatS1Bw+QzzAjSZFZx+WhCwop4BLhFJJxVK2RD4REeSjJvPZ6oovgndMOGY4
RvyeXoIJoXoHPQ7uJXMZZGRthYTWR83Aw93hi3uTd4jU+JB8WtHgvvycKTVKIkVB
T6V3PSuTmXwhHNURfev8d/JyiZMphRDJLD3esamwn2XRYtPDZjfkavwYQVeUlbms
TstymTGZXjNvPnX9HkzoURdF4F394iNyx3lX1j5nyYm0QgyHJKJI8moy8Dfv4+AB
JlL5vE7cTKtnKC5OUPCh9NZRH4pNZw==
=uO7R
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-05-19-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
When scalers are enabled, we need to program underrun
bubble counter to 0x50 to avoid Soft Pipe A underruns.
Make sure other bits dont get overwritten.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-17-lucas.demarchi@intel.com
Update MBUS_CTL register if the 2 mbus can be joined as per the current
DDB allocation and active pipes, also update hashing mode and pipe
select bits as per the sequence mentioned in the bspec.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-10-lucas.demarchi@intel.com
The SoC has 6 DDI ports(DDI A,DDI B and DDI TC1-4.
The first two are connected to combo phys while
the rest are connected to TC phys.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-5-lucas.demarchi@intel.com
XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms. However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.
Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-4-lucas.demarchi@intel.com
Finally, rename the header and source file from csr to dmc.
v2: Add file rename in Documentation.
- Place headers in orders. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-6-anusha.srivatsa@intel.com
Respective bit for master or slave to be set for uncompressed
bigjoiner in dss_ctl1 register.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-16-matthew.d.roper@intel.com
Move intel_modeset_all_pipes() to a central place so that we can
use it elsewhere as well. No functional changes.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-12-matthew.d.roper@intel.com
The DDI naming template for display version 12 went A-C, TC1-TC6. With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.
The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously. The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.
For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value. However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth). We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.
v2:
- Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose)
v3:
- Add hpd_pin to handle outputs D and E (Jose)
- Fixed conversion of BIOS port to aux ch for TC ports (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-2-matthew.d.roper@intel.com
So far if we had a mismatch between the state asked and what was
programmed in hardware for PSR, this mismatch would go unnoticed.
So here adding the PSR to the hardware configuration readout,
EDP_PSR_CTL and EDP_PSR2_CTL can't be directly read because its state
flips due to other factors like frontbuffer modifications and CRC.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210418002126.87882-1-jose.souza@intel.com
Direction on gen9+ was to stop reading the straps and only rely on the
VBT for marking the port presence. This happened while dealing with
WaIgnoreDDIAStrap and instead of using it as a WA, it should now be the
normal flow. See commit 885d3e5b6f ("drm/i915/display: fix comment on
skl straps").
For gen 10 it's hard to say if this will work or not since I can't test
it, so leave it with the same behavior as before.
For PCH_TGP we should still rely on the VBT to make ports E and F not
available.
v2 (Ville):
- use display ver >= 9 to make it consistent with the rest of the
driver instead of checking for == 9
- also handle CNL and only initialize port F if it is
IS_CNL_WITH_PORT_F. Eventually CNL may be removed, but while it
isn't let's keep it consistent everywhere
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-4-lucas.demarchi@intel.com
Since commit 45c0673aac ("drm/i915/bios: start using the
intel_bios_encoder_data directly") we lookup the devdata for each port
in intel_ddi_init() and just return if the port is not present in VBT
(or if we didn't create a fake devdata for it if VBT is not available).
So in intel_display.c we don't have to check
intel_bios_is_port_present(), just rely on the check in
intel_ddi_init().
v2: Rebase on commit 45c0673aac ("drm/i915/bios: start using the
intel_bios_encoder_data directly") re-using that check in intel_ddi_init()
instead of adding a new one.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-2-lucas.demarchi@intel.com
Alderlake-P have a new stride restriction when using DPT and it is used
by non linear framebuffers. Stride needs to be a power of two to take
full DPT rows, but stride is a parameter set by userspace.
What we could do is use a fake stride when doing DPT allocation so
HW requirements are met and userspace don't need to be changed to
met this power of two restrictions but this change will take a while
to be implemented so for now adding this restriction in driver to
reject atomic commits that would cause visual corruptions.
BSpec: 53393
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-8-imre.deak@intel.com
GTT remapping allow us to have planes with strides larger than HW
supports but DPT + GTT remapping is still not properly handled so
falling back to plane HW limitations for now.
This patch can be dropped when DPT + GTT remapping is correctly
handled but until then we need this limitation for all display13
platforms to avoid pipe faults.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-6-imre.deak@intel.com
Add support for DPT (display page table). DPT is a
slightly peculiar two level page table scheme used for
tiled scanout buffers (linear uses direct ggtt mapping
still). The plane surface address will point at a page
in the DPT which holds the PTEs for 512 actual pages.
Thus we require 1/512 of the ggttt address space
compared to a direct ggtt mapping.
We create a new DPT address space for each framebuffer and
track two vmas (one for the DPT, another for the ggtt).
TODO:
- Is the i915_address_space approaach sane?
- Maybe don't map the whole DPT to write the PTEs?
- Deal with remapping/rotation? Need to create a
separate DPT for each remapped/rotated plane I
guess. Or else we'd need to make the per-fb DPT
large enough to support potentially several
remapped/rotated vmas. How large should that be?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com>
Cc: Wilson Chris P <Chris.P.Wilson@intel.com>
Cc: Tang CQ <cq.tang@intel.com>
Cc: Auld Matthew <matthew.auld@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Wilson Chris P <Chris.P.Wilson@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-5-imre.deak@intel.com
When scanning out NV12 if we at any time have the plane enabled
while the scaler is disabled we get a pretty catastrophic
underrun.
Let's reorder the operations so that we try to avoid that happening
even if our vblank evade fails and the scaler enable/disable and
the plane enable/disable get latched during two diffent frames.
This takes care of the most common cases. I suppose there is still
at least a theoretical possibility of hitting this if one plane
takes the scaler away from another plane before the second plane
had a chance to set up another scaler for its use. But that
is starting to get a bit complicated, especially since the plane
commit order already has to be carefully sequenced to avoid any
dbuf overlaps. So plugging this 100% may prove somewhat hard...
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506073836.14848-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
I doubt anyone has used the display error state since CS flips
went the way of the dodo. Just nuke it.
It might be semi interesting to have something like this for
FIFO underruns and the like, but as it stands this wouldn't
provide a sufficient amount of information. So would need
an extensive rewrite anyway.
The lockless power well handling is also racy, so this could
just be contributing noise to test results if we end up
accessing something with the relevant power well already
disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505191140.14215-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Since
commit 890880ddfd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-3-daniel.vetter@ffwll.ch
Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.
This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)
@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)
@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"
@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"
Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
Make sure that the XYUV8888 format is handled correctly when it's used
with a MC_CCS modifier framebuffer. Besides this format not working, the
driver will also return an incorrect error value when trying to use it,
indicating that the second color plane in the framebuffer is set
unexpectedly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210501002853.4132009-1-imre.deak@intel.com
Return EREMOTE value when frame buffer object is not backed by LMEM
for discrete. If Local memory is supported by hardware the framebuffer
backing gem objects should be from local memory.
Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-7-matthew.auld@intel.com
We can handle the surface alignment of CCS and UV color planes for all
modifiers at one place, so do this. An AUX color plane can be a CCS or a
UV plane, use only the more specific query functions and remove
is_aux_plane() becoming redundant.
While at it add a TODO for linear UV color plane alignments. The spec
requires this to be stride-in-bytes * 64 on all platforms, whereas the
driver uses an alignment of 4k for gen<12 and 256k for gen>=12 for
linear UV planes.
v2:
- Restore previous alignment for linear UV surfaces.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421173220.3587009-1-imre.deak@intel.com
We lost a CCS related w/a on glk when the display version
became 10 instead of 9. Restore the correct check.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-3-ville.syrjala@linux.intel.com
(cherry picked from commit 0fe6637d98)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Gen to ver conversions across the driver
The main change is Lucas' series [1], with Ville's GLK fixes [2] and a
cherry-pick of Matt's commit [3] from drm-intel-next as a base to avoid
conflicts.
[1] https://patchwork.freedesktop.org/series/88825/
[2] https://patchwork.freedesktop.org/series/88938/
[3] 70bfb30743 ("drm/i915/display: Eliminate IS_GEN9_{BC,LP}")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_bios.c
# drivers/gpu/drm/i915/display/intel_cdclk.c
# drivers/gpu/drm/i915/display/intel_ddi.c
# drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
# drivers/gpu/drm/i915/display/intel_display.c
# drivers/gpu/drm/i915/display/intel_display_power.c
# drivers/gpu/drm/i915/display/intel_dp.c
# drivers/gpu/drm/i915/display/intel_dpll_mgr.c
# drivers/gpu/drm/i915/display/intel_fbc.c
# drivers/gpu/drm/i915/display/intel_gmbus.c
# drivers/gpu/drm/i915/display/intel_hdcp.c
# drivers/gpu/drm/i915/display/intel_hdmi.c
# drivers/gpu/drm/i915/display/intel_pps.c
# drivers/gpu/drm/i915/intel_pm.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878s5ebny0.fsf@intel.com
While converting the rest of the driver to use GRAPHICS_VER() and
MEDIA_VER(), following what was done for display, some discussions went
back on what we did for display:
1) Why is the == comparison special that deserves a separate
macro instead of just getting the version and comparing directly
like is done for >, >=, <=?
2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for
brevity. If we remove the current users of IS_DISPLAY_VER(), we
could actually repurpose it for a range check
With (1) there could be an advantage if we used gen_mask since multiple
conditionals be combined by the compiler in a single and instruction and
check the result. However a) INTEL_GEN() doesn't use the mask since it
would make the code bigger everywhere else and b) in the cases it made
sense, it also made sense to convert to the _RANGE() variant.
So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range
like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER()
users to use == and != operators. Aside from the definition changes,
this was done by the following semantic patch:
@@ expression dev_priv, E1; @@
- !IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) != E1
@@ expression dev_priv, E1; @@
- IS_DISPLAY_VER(dev_priv, E1)
+ DISPLAY_VER(dev_priv) == E1
@@ expression dev_priv, from, until; @@
- IS_DISPLAY_RANGE(dev_priv, from, until)
+ IS_DISPLAY_VER(dev_priv, from, until)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor conflict resolve while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
We lost a CCS related w/a on glk when the display version
became 10 instead of 9. Restore the correct check.
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-3-ville.syrjala@linux.intel.com
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.
v2:
- Restore a lost negation in intel_pll_is_valid().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Display features should not be initialized or de-initialized when there
is no display. Skip modeset initialization, output setup, plane, crtc,
encoder, connector registration, display cdclk and rawclk
initialization, display core initialization, etc.
Skip the functionality at as high level as possible, and remove any
redundant checks. If the functionality is conditional to *other* display
checks, do not add more. If the un-initialization has checks for
initialization, do not add more.
We explicitly do not care about any GMCH/VLV/CHV code paths, as they've
always had and will have display.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408203150.237947-3-jose.souza@intel.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.
v2:
- Restore a lost negation in intel_pll_is_valid().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
Instead of copying separately the GTT remapped and color plane view info
from the FB to the plane state, do this by copying the whole
intel_fb_view struct. For this we make sure the FB view state is fully
inited (that is also including the view type) already during FB
creation, so this init is not required during atomic check time. This
also means the we don't need to reset the unused color plane info during
atomic check, as these are already reset during FB creation.
I noticed that initial FBs will only work atm if they are page aligned
(which BIOS most probably always ensures), but add a comment to sanitize
this part once. Also we won't disable the plane if
get_initial_plane_config() failed for some reason (for instance due to
unsupported rotation), add a TODO: comment for this too.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com
To allow the simplification of FB/plane view computation in the
follow-up patches, unify the corresponding state in the
intel_framebuffer and intel_plane_state structs into a new intel_fb_view
struct.
This adds some overhead to intel_framebuffer as the rotated view will
have now space for 4 color planes instead of the required 2 and it'll
also contain the unused offset for each color_plane info. Imo this is an
acceptable trade-off to get a simplified way of the remap computation.
Use the new intel_fb_view struct for the FB normal view as well, so (in
the follow-up patches) we can remove the special casing for normal view
calculation wrt. the calculation of remapped/rotated views. This also
adds an overhead to the intel_framebuffer struct, as the gtt remap info
and per-color plane offset/pitch is not required for the normal view,
but imo this is an acceptable trade-off as above. The per-color plane
pitch filed will be used by a follow-up patch, so we can retrieve the
pitch for each view in the same way.
No functional changes in this patch.
v2:
- Make the patch have _no functional change_.
(fix skl_check_nv12_aux_surface() and skl_check_main_surface()).
- s/i915_color_plane_view::pitch/stride/ (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com
This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-5-imre.deak@intel.com
The HW plane state is cleared and inited after we store the rotation to
it, so store it instead to the uapi state to match what we do with all
other plane state until intel_plane_copy_uapi_to_hw_state() is called.
Rotation for initial FBs is not supported atm, but let's still fix the
plane state setup here.
While at it remove the redundant intel_state->uapi.src/dst init, which
will be done in intel_plane_copy_uapi_to_hw_state().
v2: Remove redundant intel_state->uapi.src/dst init. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-2-imre.deak@intel.com
The dbuf bandwidth calculations don't need the planes to be
added to the state. Each plane's data rate has already been
precalculated and stored in the crtc state, and that with
the dbuf slice usage for each plane is all the dbuf bandwidth
code needs to figure out what the minimum cdclk is.
What we're trying to do here is make sure each plane recalculates
its minimum cdclk (ie. plane->min_cdclk()) on those platforms where
the number of active planes affects the result of said calculation.
Nothing to do with any dbuf cdclk requirements.
Not sure if we had stuff in slightly different order or what,
but at least in the current scheme this is not necessary.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325004415.17432-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
There are a couple of ioctl's related to tiling and cache placement,
that make no sense for userptr, reject those:
- i915_gem_set_tiling_ioctl()
Tiling should always be linear for userptr. Changing placement will
fail with -ENXIO.
- i915_gem_set_caching_ioctl()
Userptr memory should always be cached. Changing caching mode will
fail with -ENXIO.
- i915_gem_set_domain_ioctl()
Still temporarily allowed to work as intended, it's used to check
userptr validity. With the reworked userptr code, it will keep
working for this usecase.
This plus the previous changes have been tested against beignet
by using its own unit tests, and intel-video-compute by using
piglit's opencl tests.
Changes since v1:
- set_domain was apparently used in iris for checking userptr validity,
keep it working as intended.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-14-maarten.lankhorst@linux.intel.com
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
ILK is the only platform that we consider "gen5" and SNB is the only
platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then
replace numeric platform tests for these two generations with direct
platform tests with the following Coccinelle semantic patch:
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 5)
+ IS_IRONLAKE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 6)
+ IS_SANDYBRIDGE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN_RANGE(dev_priv, 5, 6)
+ IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv)
This will simplify our upcoming patches which eliminate INTEL_GEN()
usage in the display code.
v2:
- Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville)
- Rebase + regenerate from semantic patch
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
Extract the g4x+ HDMI low level code to its own file,
leaving intel_hdmi.c to deal with higher level issues.
The infoframe support I decided to leave in intel_hdmi.c
since I think we need to move that as a whole to its own file.
It is after all used also for DP SDPs, so no longer HDMI
specific.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-7-ville.syrjala@linux.intel.com
Move the g4x+ DP code into a new file. This will leave mostly
platform agnostic code in intel_dp.c. Well, the misplaced phy
test stuff pretty much ruins that, but let's squint real hard
for now.
v2: Add comment exlaining which platforms are covered (Daniel)
Leave intel_dp_unused_lane_mask() be since it is pretty generic
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-6-ville.syrjala@linux.intel.com
Highlights:
- Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas)
- Refactor display code to shrink intel_display.c etc. (Dave)
- Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas)
- Add eDP MSO support (Jani)
Display:
- Refactor to support multiple PSR instances (Gwan-gyeong)
- Link training debug logging updates (Sean)
- Updates to eDP fixed mode handling (Jani)
- Disable PSR2 on JSL/EHL (Edmund)
- Support DDR5 and LPDDR5 for bandwidth computation (Clint, José)
- Update VBT DP max link rate table (Shawn)
- Disable the QSES check for HDCP2.2 over MST (Juston)
- PSR updates, refactoring, selective fetch (José, Gwan-gyeong)
- Display init sequence refactoring (Lucas)
- Limit LSPCON to gen 9 and 10 platforms (Ankit)
- Fix DDI lane polarity per VBT info (Uma)
- Fix HDMI vswing programming location in mode set (Ville)
- Various display improvements and refactorings and cleanups (Ville)
- Clean up DDI clock routing and readout (Ville)
- Workaround async flip + VT-d corruption on HSW/BDW (Ville)
- SAGV watermark fixes and cleanups (Ville)
- Silence pipe tracepoint WARNs (Ville)
Other:
- Remove require_force_probe protection from RKL, may need to be revisited (Tejas)
- Detect loss of MMIO access (Matt)
- GVT display improvements
- drm/i915: Disable runtime power management during shutdown (Imre)
- Perf/OA updates (Umesh)
- Remove references to struct drm_device.pdev, via topic branch (Thomas)
- Backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
Rename a bunch of the skl+ watermark struct members to
have sensible names. Avoids me having to think what
plane_res_b/etc. means.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Now that all the encoder clock stuff is uniformly abstracted
for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping()
to cover all of them.
Not sure there is a particular benefit in doing so, but less special
cases always makes me happy.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook.
There it neatly sits next to the matching .{enable,disable}_clock()
functions.
In order to avoid excessive boilerplate I changed the behaviour
such that all platforms now do the readout via
crtc_state->port_dpll[].
ICL+ TC is still a bit special due to TBTPLL not having a functional
.get_freq(). Should probably change that by adopting the LCPLL
approach, but that would require a fairly substantial rework of the
DPLL ID handling. So leave it for later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
All the other places we have use pipes instead of crtc indices
when tracking resource usage. Life is easier when we do it
the same way always, so switch the dpll mgr to using pipes as
well. Looks like it was actually mixing these up in some cases
so it would not even have worked correctly except when the
device has a contiguous set of pipes starting from pipe A.
Granted, that is the typical case but supposedly it may not
always hold on modern hw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
The clock readout for DDI encoders needs to moved into the encoders.
To that end intel_dpll_readout_hw_state() needs to happen after
the encoder readout as otherwise it can't correctly populate
the PLL crtc_mask/active_mask bitmasks.
v2: Populate DPLL ref clocks before the encoder->get_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210225161225.30746-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
On platforms/outputs without a working frame counter we rely
on the vblank code to cook up the frame counter from the timestamps.
That requires that vblank support is enabled. Thus we need to
move the pipe enable/disable tracepoints to the other side
of the drm_vblank_{on,off}() calls. There shouldn't really be
much happening between these old and new call sites so the
tracepoints should still provide reasonable data.
The alternative would be to give up on having the frame counter
values in the trace which would render the tracepoints more or
less pointless.
v2: Missed one case in intel_ddi_post_disable()
Drop the now useless i915_trace.h includes
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-2-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Add splitter configuration to crtc state, and read it where
supported. Also add splitter state dumping. The stream splitter will be
required for eDP MSO.
v4:
- Catch invalid splitter configuration (Uma)
v3:
- Convert segment timings to full panel timings.
- Refer to splitter instead of mso in crtc state.
- Dump splitter state.
v2: Add warning for mso being enabled on pipes other than A.
Cc: Nischal Varide <nischal.varide@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95cbe1c9d45edf3e3ec252e49fb49055def98155.1614682842.git.jani.nikula@intel.com
Get rid of the nonsense cursor special case in verify_wm_state()
by just iterating through all the planes. And let's use the
canonical [PLANE:..] style in the debug prints while at it.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We know which WM0 (normal vs. SAGV) we supposedly programmed
into the hardware, so just check against that instead of accepting
either watermark as valid.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Seems to me that if we calculate WM0 using the bumped up SAGV latency
we need to calculate the transition watermark accordingly. Track it
alongside the other watermarks.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We'll want a SAGV transition watermark as well. Prepare
for that by collecting SAGV wm0 into a sub-strcture.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Populate conn_state->max_bpc with something sensible from the start.
Otherwise it's possible that we get to compute_sink_pipe_bpp() with
max_bpc==0.
The specific scenario goes as follows:
1. Initial connector state allocated with max_bpc==0
2. Trigger a modeset on the crtc feeding the connector, without
actually adding the connector to the commit
3. drm_atomic_connector_check() is skipped because the
connector has not yet been added, hence conn_state->max_bpc
retains its current value
4. drm_atomic_helper_check_modeset() ->
drm_atomic_add_affected_connectors() -> the connector
is now part of the commit
5. compute_baseline_pipe_bpp() -> MISSING_CASE(max_bpc==0)
Note that pipe_bpp itself may not be populated on pre-g4x machines,
in which case we just fall back to max_bpc==8 and let .compute_config()
limit the resulting pipe_bpp further if necessary.
Cc: Daniel Vetter <daniel@ffwll.ch>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216160035.4780-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We tend to use output_format!=RGB as a shorthand for YCbCr, but
this fails if we have a disabled crtc where output_format==INVALID.
We're now getting some fail from intel_color_check() when we have:
hw.enable==false
hw.ctm!=NULL
output_format==INVALID
Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the
dumpster, and thus everything defaults to RGB when the crtc
is disabled.
This does beg the deeper question of how much of the state
should we in fact be validating when hw/uapi.enable==false.
And should we even be doing the uapi->hw copy when
uapi.enable==false? So far I've not been able to come up with
satisfactory answers for myself, so I'm putting it off for the
moment.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: 0aa5c3835c ("drm/i915: support two CSC module on gen11 and later")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 7e07c68f06)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we sanitize planes let's wait for the scanout to stop
before we let the subsequent code tear down the ggtt mappings
and whatnot. Cures an underrun on my ivb when I boot with
VT-d enabled and the BIOS fb gets thrown out due to stolen
being considered unusable with VT-d active.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210217162050.13803-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We tend to use output_format!=RGB as a shorthand for YCbCr, but
this fails if we have a disabled crtc where output_format==INVALID.
We're now getting some fail from intel_color_check() when we have:
hw.enable==false
hw.ctm!=NULL
output_format==INVALID
Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the
dumpster, and thus everything defaults to RGB when the crtc
is disabled.
This does beg the deeper question of how much of the state
should we in fact be validating when hw/uapi.enable==false.
And should we even be doing the uapi->hw copy when
uapi.enable==false? So far I've not been able to come up with
satisfactory answers for myself, so I'm putting it off for the
moment.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: 0aa5c3835c ("drm/i915: support two CSC module on gen11 and later")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.
On ilk/snb/ivb it looks like the accesses just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.
Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.
And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.
Fixes: 6ede6b0616 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054ad ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e240c ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13a ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 59fb8218c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo also exported some functions from intel_display.c during backport]
intel_init_audio_hooks() sets up hooks in the display struct and only
makes sense when we have display. Move it inside
intel_init_display_hooks() so it isn't called when we don't have
display.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210213042756.953007-4-lucas.demarchi@intel.com
Now that all display-related functions are grouped in
i915_driver_register(), move them to display/ so we reduce the amount of
display calls from the rest of the driver.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210213042756.953007-3-lucas.demarchi@intel.com
Apparently the new gen9_bc platforms that Intel has introduced don't
provide us with a STRAP config register to read from for initializing DDI
B, C, and D detection. So, workaround this by hard-coding our strap config
in intel_setup_outputs().
Changes since v4:
* Split this into it's own commit
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
[originally from Tejas's work]
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-5-lyude@redhat.com
We are not checking for specific SKUs and feedback from HW team is that
it may not work since it was supposed to be fixed by the same time
straps stopped to be used. So, just update comment.
v2: Instead of removing the check, just update the comment since
feedback from HW team was that it actually may not work
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625001120.22810-3-lucas.demarchi@intel.com
This moves the code from various places and consolidates it
into one new file.
v2:
- rename skl_program_plane -> skl_program_plane_scaler (Ville)
- also move skl_pfit_enable, and consequently make some skl_scaler_*
functions static to skl_scaler.c (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
Rework the plane init calls to do the gen test one level higher.
Rework some of the plane helpers so they can live in new file,
there is still some scope to clean up the plane/fb interactions
later.
v2: drop atomic code back, rename file to Ville suggestions,
add header file.
v3: move scaler bits back
v4: drop wrong new includes (Ville)
v5: integrate the ccs gen12 changes
v6: fix unrelated code movement (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: fixed up sparse warnings.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e88a5c6b9ab3b93cc2b6c7d78c26ae86f6abbd0.1612536383.git.jani.nikula@intel.com
It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.
v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
- Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
- Remove wrong comments and add comments for a limit of supporting of
a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
PSR on BDW+
v8: Address Anshuman's review comments
- Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
- Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
- In order to reduce changes keep the old name for drm_i915_private.
- Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
- Change the calling of intel_psr2_program_trans_man_trk_ctl() into
commit_pipe_config().
- Change a checking order of CAN_PSR() and connector_status to original
on i915_psr_sink_status_show().
- Drop unneeded intel_dp_update_pipe() function.
- In order to wait a specific encoder which belong to crtc_state on
intel_psr_wait_for_idle(), add checking of encoder.
- Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
- Add and use for_each_intel_psr_enabled_encoder() macro.
- In order to use correct frontbuffer_bit for each pipe,
fix intel_psr_invalidate() and intel_psr_flush().
- Remove redundant or unneeded codes.
- Update comments.
v14: Address Jose's review comment
- Add and use for_each_intel_encoder_can_psr() macro and
for_each_intel_encoder_mask_can_psr() macro.
- Add source_support member variable into intel_psr structure.
- Update CAN_PSR() macro that checks source_support.
- Move encoder's PSR availity check to psr_init() from
psr_compute_config().
- Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
intel_psr2_program_trans_man_trk_ctl()
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmAUkUIACgkQ+mJfZA7r
E8rdqAgArg9X7LaZ9pnrPNDK2CSIZ7OSFmLjqYePDlKM+13TstM0NgMzMMCad7oM
0687oOaoT8NTaTvs5mQOG1TMWm8EfFsm1hzY8SRBDqHIjROUQWjYJRU202yWB2Ik
Od5rsJ7U+RiVmdTCU0vPahSCSgqLS7s9/Cj0uxjP5q7Fpg8ab7R5pQL3a/XFqRFY
VEynVt9GyGV/0bD7S8n6sJTKKMtdjWif1t6OiIdYZeU2UQY9juaIs+WuC6HaL+Zr
mq2p1zUJfpEK1r7GupWUHQm/bhwhaBVbuqvhWZFFyyv5gyyHY8dLTXmAgZioMEJT
F0TZR5zMCuBFJ0BSo7IuhJnJsBSHtQ==
=VcVL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-01-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- WARN if plane src coords are too big (Ville)
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com
Add support for async flips on vlv/chv. Unlike all the other
platforms vlv/chv do not use the async flip bit in DSPCNTR and
instead we select between async vs. sync flips based on the
surface address register. The normal DSPSURF generates sync
flips DSPADDR_VLV generates async flips. And as usual the
interrupt bits are different from the other platforms.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Add support for async flips on ivb/hsw. Again no need for any
workarounds and just have to deal with the interrupt bits being
shuffled around a bit.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need
any workarounds to disable async flips. Apart from that the only
real difference from the bdw implementation is the location of the
flip_done interrupt bits.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Implement async flip support for BDW. The implementation is
similar to the skl+ code. And just like skl/bxt/glk bdw also
needs the disable w/a, thus we need to plumb the desired state
of the async flip all the way down to i9xx_plane_ctl_crtc().
According to the spec we do need to bump the surface alignment
to 256KiB for this. Async flips require an X-tiled buffer so
we don't have to worry about linear.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmARc1oACgkQ+mJfZA7r
E8ovFAgAhBlnhrquGrgtuRmS5tkpLQShqiwrPv7ogDBkcayJ6Is+AO+FoE8kuzZO
q/TW2enkcRKFHhQnm9RA0Ayk+rwYqkEOcBU5gvzusdwbEjkygJfH/yA2ukAmaw32
QxP9A2pW+iWsEcqtMuOEu1ahu0Z8gnkCe8DakuBMf/0y5D9DairwaCC8nyZQdEJq
YFTxp+pILE57PhOVbKS3EZPbnl5t28NgCtMc8hjlPTWZxRSVV0eDrY2tx9vyhFhU
Eq8aLDxPKCRm18sg+J+lDytOvFoljXcglAEwPODVMmDNolG8R6aRQ9T6tG6qfxyI
UO1KyeYUHHEIJ4IBJKK+KWeUWLLBhA==
=3Jc8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-01-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- HDCP 2.2 and HDCP 1.4 Gen12 DP MST support (Anshuman)
- Fix DP vswing settings and handling (Imre, Ville)
- Various display code clean-up (Jani, Ville)
- Various display refactoring, including split out of pps, aux, and fdi (Ja\
ni, Dave)
- Add DG1 missing workarounds (Jose)
- Fix display color conversion (Chris, Ville)
- Try to guess PCH type even without ISA bridge (Zhenyu)
- More backlight refactor (Lyude)
- Support two CSC module on gen11 and later (Lee)
- Async flips for all ilk+ platforms (Ville)
- Clear color support for TGL (RK)
- Add a helper to read data from a GEM object page (Imre)
- VRR/Adaptive Sync Enabling on DP/eDP for TGL+ (Manasi, Ville Aditya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127140822.GA711686@intel.com
Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().
Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.
This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.
[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281
Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com
DSI transcoder does not support VRR and hence skip the HW state
readout if its a DSI transcoder.
Fixes: c7f0f4372b ("drm/i915/display: Add HW state readout for VRR")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210126185224.32340-1-manasi.d.navare@intel.com
Initialize display outputs for ADL-S. ADL-S has 5 display
outputs -> 1 eDP, 2 HDMI and 2 DP++ outputs.
v2:
- Use PORT_TCx instead of PORT_D,E.. to stay consistent
with other platforms.(mdroper)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-8-aditya.swarup@intel.com
Add changes to configure port clock registers for ADL-S. Combo phy port
clocks are configured by DPCLKA_CFGCR0 and DPCLKA_CFGCR1 registers.
The DDI to internal clock mappings in DPCLKA_CFGCR0 register for ADL-S
translates to
DDI A -> DDIA
DDI B -> USBC1
DDI I -> USBC2
For DPCLKA_CFGCR1
DDI J -> USBC3
DDI K -> USBC4
Bspec: 50287
Bspec: 53812
Bspec: 53723
v2: Replace I915_READ() with intel_de_read().(Jani)
v3:
- Use reg variable to assign ADLS specific registers inorder to replace
branching with intel_de_read/write() calls.(mdroper)
- Reuse icl_get_ddi_pll() for ADLS to fix issue with updating active
dpll on driver load.(aswarup)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-7-aditya.swarup@intel.com
Alderlake-S has 5 combo phys, add reg definitions for
combo phys and update the port to phy helper for ADL-S.
v2:
- Change IS_GEN() >= 12 to IS_TIGERLAKE() in intel_phy_is_tc()
and return false for platforms RKL,DG1 and ADLS.(mdroper)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-5-aditya.swarup@intel.com
In order to make the dbuf state computation less fragile
let's make it stand on its own feet by not requiring someone
to peek into a crystall ball ahead of time to figure out
which pipes need to be added to the state under which potential
future conditions. Instead we compute each piece of the state
as we go along, and if any fallout occurs that affects more than
the current set of pipes we add the affected pipes to the state
naturally.
That requires that we track a few extra thigns in the global
dbuf state: dbuf slices for each pipe, and the weight each
pipe has when distributing the same set of slice(s) between
multiple pipes. Easy enough.
We do need to follow a somewhat careful sequence of computations
though as there are several steps involved in cooking up the dbuf
state. Thoguh we could avoid some of that by computing more things
on demand instead of relying on earlier step of the algorithm to
have filled it out. I think the end result is still reasonable
as the entire sequence is pretty much consolidated into a single
function instead of being spread around all over.
The rough sequence is this:
1. calculate active_pipes
2. calculate dbuf slices for every pipe
3. calculate total enabled slices
4. calculate new dbuf weights for any crtc in the state
5. calculate new ddb entry for every pipe based on the sets of
slices and weights, and add any affected crtc to the state
6. calculate new plane ddb entries for all crtcs in the state,
and add any affected plane to the state so that we'll perform
the requisite hw reprogramming
And as a nice bonus we get to throw dev_priv->wm.distrust_bios_wm
out the window.
v2: Keep crtc_state->wm.skl.ddb
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-8-ville.syrjala@linux.intel.com
To get sensible vblank timestamping behaviour we need to feed
the vmax based timings to the vblank code, otherwise it'll chop
off the scanline counter when it exceeds the minumum vtotal.
Additionally with VRR we have three cases to consider when we
generate the vblank timestamp:
1) we are in vertical active
-> nothing special needs to be done, just return the current
scanout position and the core will calculate the timestamp
corresponding to the past time when the current vertical
active started
2) we are in vertical blank and no push has been sent
-> the hardware will keep extending the vblank presumably
to its maximum length, so we make the timestmap match the
expected time when the max length vblank will end. Since
the timings used for this are now based on vmax nothing
special actually needs to be done
3) we are in vblank and a push has been sent so the vblank is
about to terminate
-> presumably we want the timestmap to accurately reflect
when the vblank will terminate, so we use the sampled
frame timestamp vs. current timestamp to guesstimate
how far along the vblank exit we are, and then we
adjust the reported scanout position accordingly so
that the core will see that the vblank is close to
ending.
v2:
* Fix the else if (use_scanline_Counter) (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-17-manasi.d.navare@intel.com
This functions gets the VRR config from the VRR registers
to match the crtc state variables for VRR.
v2:
* Rebase (Manasi)
* Use HAS_VRR (Jani N)
v3:
* Get pipeline_full, flipline (Ville)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-14-manasi.d.navare@intel.com
This forces a complete modeset if vrr drm crtc state goes
from enabled to disabled and vice versa.
This patch also computes vrr state variables from the mode timings
and based on the vrr property set by userspace as well as hardware's
vrr capability.
v2:
*Rebase
v3:
* Vmin = max (vtotal, vmin) (Manasi)
v4:
* set crtc_state->vrr.enable = 0 for disable request
v5:
* drm_dbg_kms, squash crtc states def patch (Jani N)
v6:
* Move vrr modeset check to separate function (Jani N)
v7:
* Ville's fixes - vmin, vmax rename, fix rounding dir
* Add pipeline full, flipline to crtc state
* Pass conn state to vrr_compute_config (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-6-manasi.d.navare@intel.com
The vrr calculations will need to know the framestart delay value
we use. Currently we program it always to zero, but should that change
we probably want to stash it somewhere.
Could stick it into the crtc_state I suppose, but since we never
change it let's just stuff it into dev_priv for now.
v2:
* Rebase on drm-tip (Manasi)
v3:
* Framestart_delay as 1 - 4 to align with HW
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-3-manasi.d.navare@intel.com
Render Decompression is supported with Y-Tiled main surface. The CCS is
linear and has 4 bits of data for each main surface cache line pair, a
ratio of 1:256. Additional Clear Color information is passed from the
user-space through an offset in the GEM BO. Add a new modifier to identify
and parse new Clear Color information and extend Gen12 render decompression
functionality to the newly added modifier.
v2: Fix has_alpha flag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while running kms_cube
v4: Add alignment check and reuse the comments for ge12_ccs_formats(Matt)
v5: Fix typos and wrap comments(Matt)
v6:
- Use format block descriptors to get the subsampling calculations for
the CCS surface right.
- Use helpers to convert between main and CCS surfaces.
- Prevent coordinate checks for the CC surface.
- Simplify reading CC value from surface map, add description of CC val
layout.
- Remove redundant ccval variable from skl_program_plane().
v7:
- Move the CC value readout after syncing against any GPU write on the
FB obj (Nanley, Chris)
- Make sure the CC value readout works on platforms w/o struct pages
(dGFX) and other non-coherent platforms wrt. CPU reads (none atm).
(Chris)
v8:
- Rebase on the function param order change of
i915_gem_object_read_from_page().
- Clarify code comment on the clear color value format and the required
FB obj pinning/syncing by the caller.
- Remove redundant variables in
intel_atomic_prepare_plane_clear_colors().
v9:
- Fix s/sizeof(&ccval)/sizeof(ccval)/ typo.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Nanley G Chery <nanley.g.chery@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115213952.1040398-1-imre.deak@intel.com
intel_display.c has some pps functions that belong to intel_pps.c. Move
them over.
While at it, refactor the duplicate intel_pps_init() in intel_display.c
into an orthogonal intel_pps_setup() in intel_pps.c, and call it earlier
in intel_modeset_init_nogem().
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120101834.19813-2-jani.nikula@intel.com
Simplify the frontbuffer unpin by removing the lock requirement. The LRU
bumping was primarily to protect the GTT from being evicted and from
frontbuffers being eagerly shrunk. Now we protect frontbuffers from the
shrinker, and we avoid accidentally evicting from the GTT, so the
benefit from bumping LRU is no more, and we can save more time by not.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk
Currently, if a modeset/pageflip needs to wait for render completion to
an object, we boost the priority of that rendering above all other work.
We can apply the same interactive priority boosting to explicit fences
that we can unwrap into a native i915_request (i.e. sync_file).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119204454.10343-1-chris@chris-wilson.co.uk
On some platforms we need to trigger an extra async flip with
the async flip bit disabled, and then wait for the next vblank
until the async flip bit off state will actually latch.
Currently the w/a is just open coded for skl+ universal planes.
Instead of doing that lets reuse the .async_flip() hook for this
purpose since it needs to write the exact same set of registers.
In order to do this we'll just have the caller pass in the state
of the async flip bit explicitly.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-8-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Set up the async flip PLANE_CTL bit directly in the
.async_flip() hook. Neither .update_plane() nor .disable_plane()
ever need to set this so having it done by skl_plane_ctl_crtc()
is rather pointless.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-7-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Prepare for more platforms with async flip support by turning
the flip_done interrupt enable/disable into plane vfuncs.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-6-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Only assign the plane->async_flip() vfunc when the plane supports
async flips. For now we keep this artificially limited to the primary
plane since thats the only thing the legacy page flip uapi can target
and there is no async flip support in the atomic uapi yet.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-5-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
There are two CSC on pipeline on gen11 and later platform.
User space application is allowed to enable CTM and RGB
to YCbCr coversion at the same time now.
v2: check csc capability in {}_color_check function.
v3: can't support two CSC at the same time in {ivb,glk}_color_check.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Shankar Uma <uma.shankar@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118022753.8798-1-shawn.c.lee@intel.com
This pulls a large chunk of the pll calculation code out of
intel_display.c to a new file.
One function makes sense to be an inline, otherwise this
is pretty much a straight copy cover. Also all the
remaining hooks for g45 and older end up the same now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: cleaned up intel_dpll.h a bit, de-duped intel_panel_use_ssc().]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74b58e0572858b5d1734818ca594a23040d7d44f.1610622609.git.jani.nikula@intel.com
We dropped the other redundant master_transcoder assignments
earlier, but this one slipped through. Get rid of it as well.
The crtc state gets fully reset before readout so there is
no point in doing this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019214337.19330-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Always prefer the kernel types over stdint types in i915.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141158.25513-1-jani.nikula@intel.com
The calculation the offsets of the main surface will be needed by PSR2
selective fetch code so here splitting and exporting it.
No functional changes were done here.
v3: Rebased
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-3-jose.souza@intel.com
Ville suggested this as a good idea, let's move this before moving
the crtc code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Jani: fixed i915xx_plane.h standalone build.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221110957.18215-1-jani.nikula@intel.com
This file is a monster, let's start simple, the cursor plane code
seems pretty standalone, and splits out easily enough.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: cleaned up intel_cursor.h a bit.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201221090449.8288-4-jani.nikula@intel.com
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----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=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
Reduce the module/device probe error into a mere debug to hide issues
where the initial modeset is failing (after lies told by hw probe) and
the system hangs with a livelock in cleaning up the failed commit.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619
Fixes: b3bf99daae ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Fixes: ccc9e67ab2 ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk
Let's do the kill_bigjoiner_slave() thing from
intel_bigjoiner_add_affected_crtcs() since it's related to
what we do there. This cleans up the logic in the
compute_config() loop a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
If either of the bigjoiner pipes needs a modeset then we need
a modeset on both pipes. Make it so.
v2: Split out the kill_bigjoiner_slave() change (Manasi)
Add affected connectors/planes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
drm_atomic_add_affected_planes() only considers planes which
are logically enabled in the uapi state. For bigjoiner we need
to consider planes logically enabled in the hw state. Add a
helper for that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Currently crtc_state->uapi.plane_mask only tracks logically
enabled planes on the uapi level. For bigjoiner purposes
we want to do the same for the hw state. Let's follow the
pattern established by active_planes & co. here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124201156.17095-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Factor out helper functions to get/put a set of power domains that are
tracked using their wakeref handles. The same is needed by the next
patch adding tracking for enabled CRTC power domains.
v2: s/uint64_t/u64/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-1-imre.deak@intel.com
The for_each_oldnew_intel_crtc_in_state() iterator index does match
crtc->pipe, but using the same thing as array index when getting and
putting CRTC power domains makes things clearer.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-2-imre.deak@intel.com
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com
(cherry picked from commit 71c8415d0d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we try and estimate how long we require to update the registers to
perform a plane update, it is of vital importance that we measure the
distribution of plane updates to better guide our estimate. If we
underestimate how long it takes to perform the plane update, we may
slip into the next scanout frame causing a tear. If we overestimate, we
may unnecessarily delay the update to the next frame, causing visible
jitter.
Replace the warning that we exceed some arbitrary threshold for the
vblank update with a histogram for debugfs.
v2: Add a per-crtc debugfs entry so that the information is easier to
extract when testing individual CRTC, and so that it can be reset before
a test.
v3: Flip the graph on its side; creates space to label the time axis.
Updates: 4684
|
1us |
|
4us |********
|**********
16us |***********
|*****
66us |
|
262us |
|
1ms |
|
4ms |
|
17ms |
|
Min update: 5918ns
Max update: 54781ns
Average update: 16628ns
Overruns > 250us: 0
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1982
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20201202212814.26320-1-chris@chris-wilson.co.uk
For DG1 we have a little of mix up wrt to DDI/port names and indexes.
Bspec refers to the ports as DDIA, DDIB, DDI USBC1 and DDI USBC2
(besides the DDIA, DDIB, DDIC, DDID), but the previous naming is the
most unambiguous one. This means that for any register on Display Engine
we should use the index of A, B, D and E. However in some places this is
not true:
- VBT: uses C and D and have to be mapped to D/E
- IO/Combo: uses C and D, but we already differentiate those when
we created the phy vs port distinction.
This additional mapping for VBT and phy are already covered in previous
patches, so now we can initialize all the DDIs as A, B, D and E.
v2: Squash previous patch enabling just ports A and B since most of the
pumbling code is already merged now
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117084836.2318234-1-lucas.demarchi@intel.com
EDID can declare the maximum supported bpc up to 16,
and apparently there are displays that do so. Currently
we assume 12 bpc is tha max. Fix the assumption and
toss in a MISSING_CASE() for any other value we don't
expect to see.
This fixes modesets with a display with EDID max bpc > 12.
Previously any modeset would just silently fail on platforms
that didn't otherwise limit this via the max_bpc property.
In particular we don't add the max_bpc property to HDMI
ports on gmch platforms, and thus we would see the raw
max_bpc coming from the EDID.
I suppose we could already adjust this to also allow 16bpc,
but seeing as no current platform supports that there is
little point.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 2ca5a7b85b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We can't call drm_plane_state_src() this late for the slave plane since
it would consult the wrong uapi state. We've alreayd done the correct
uapi->hw copy earlier, so let's just preserve the unclipped src/dst
rects using a temp copy across the intel_atomic_plane_check_clipping()
call.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-14-manasi.d.navare@intel.com
We need to look at hw.fb for the framebuffer, and add the translation
for the slave_plane_state. With these changes we set the correct
rectangle on the bigjoiner slave, and don't set incorrect
src/dst/visibility on the slave plane.
v2:
* Manual rebase (Manasi)
v3:
* hw.rotation instead of uapi.rotation (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-11-manasi.d.navare@intel.com
When using bigjoiner userspace is only controlling the "master"
plane, so use its uapi state for the "slave" plane as well.
hw.crtc needs a bit of magic since we don't want to copy that from
the uapi state (as it points to the wrong pipe for the "slave
" plane). Instead we pass the right crtc in explicitly but only
assign it when the uapi state indicates the plane to be logically
enabled (ie. uapi.crtc != NULL).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-10-manasi.d.navare@intel.com
Make sure both the bigjoiner "master" and "slave" plane are
in the state whenever either of them is in the state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-9-manasi.d.navare@intel.com
Skip iterating over bigjoiner slaves, only the master has the state we
care about.
Add the width of the bigjoiner slave to the reconstructed fb.
Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.
And last, disable bigjoiner slave from primary if reconstruction fails.
v3:
* Fix the ddi_get_config slave error (Ankit Nautiyal)
v2:
* Unsupported bigjoiner config for initial fb (Ville)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* Don't do any hw->uapi state copy for bigjoiner slave
* We still have hw.mode so no need to pass it in
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-7-manasi.d.navare@intel.com
Enabling is done in a special sequence and so should plane updates
be. Ideally the end user never notices the second pipe is used.
This way ideally everything will be tear free, and updates are
really atomic as userspace expects it.
This uses generic modeset_enables() calls like trans port sync
but still has special handling for disable since for slave we
should not disable things like encoder, plls that are not enabled
for slave.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-6-manasi.d.navare@intel.com
Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com
When the clock is higher than the dotclock, try with 2 pipes enabled.
If we can enable 2, then we will go into big joiner mode, and steal
the adjacent crtc.
This only links the crtc's in software, no hardware or plane
programming is done yet. Blobs are also copied from the master's
crtc_state, so it doesn't depend at commit time on the other
crtc_state.
v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
Changes since v1:
- Rename pipe timings to transcoder timings, as they are now different.
Changes since v2:
- Rework bigjoiner checks; always disable slave when recalculating
master. No need to have a separate bigjoiner pass any more.
- Use pipe_mode instead of transcoder_mode, to clean up the code.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com
Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.
v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)
Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
and split off the downstream and source checking to its own function.
(Ville)
v3:
* Rebase (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com
When doing the plane state copy from the UV plane to the Y plane
let's just copy the hw state directly instead of using the original
uapi state. The UV plane has already had its uapi state copied into
its hw state, so this extra detour via the uapi state for the Y plane
is pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-2-manasi.d.navare@intel.com
EDID can declare the maximum supported bpc up to 16,
and apparently there are displays that do so. Currently
we assume 12 bpc is tha max. Fix the assumption and
toss in a MISSING_CASE() for any other value we don't
expect to see.
This fixes modesets with a display with EDID max bpc > 12.
Previously any modeset would just silently fail on platforms
that didn't otherwise limit this via the max_bpc property.
In particular we don't add the max_bpc property to HDMI
ports on gmch platforms, and thus we would see the raw
max_bpc coming from the EDID.
I suppose we could already adjust this to also allow 16bpc,
but seeing as no current platform supports that there is
little point.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2632
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110210447.27454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
On icl+ we want to populate both crtc_state.{shared_dpll,dpll_hw_state}
and crtc_state.port_dplls[] during readout, whereas on pre-icl we
want to leave the latter stuff untouched. Rather than adding more ifs
into hsw_get_ddi_port_state() to copy the DPLL hw state around let's
just move the whole dpll readout into hsw_get_ddi_dpll() & co.
Slightly repetitive, but meh.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109231239.17002-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
No functional changes here, just adds a from_crtc_state
as a prep for bigjoiner
v2:
* More prep with intel_atomic_state (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113155656.17630-2-manasi.d.navare@intel.com
No functional changes, to align with previous cleanups pass
intel_atomic_state instead of drm_atomic_state.
Also pass this intel_atomic_state with crtc_state to
some of the atomic_check functions.
v2:
* Squash some changes from next patch (Ville)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113155656.17630-1-manasi.d.navare@intel.com
With bigjoiner, there will be 2 pipes driving 2 halves of 1 transcoder,
because of this, we need a pipe_mode for various calculations, including
for example watermarks, plane clipping, etc.
v10:
* remove redundant pipe_mode assignment (Ville)
v9:
* pipe_mode in state dump nd state check (Ville)
v8:
* Add pipe_mode in readout in verify_crtc_state (Ville)
v7:
* Remove redundant comment (Ville)
* Just keep mode instead of pipe_mode (Ville)
v6:
* renaming in separate function, only pipe_mode here (Ville)
* Add description (Maarten)
v5:
* Rebase (Manasi)
v4:
* Manual rebase (Manasi)
v3:
* Change state to crtc_state, fix rebase err (Manasi)
v2:
* Manual Rebase (Manasi)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
[vsyrjala:
* Fix state checker
* Fix state dump
* Use pipe_mode for linetime watermarks
* Make sure pipe_mode normal timings are correct since the
silly ddb code uses them
* Drop the redundant pipe_mode copies from intel_modeset_pipe_config()
and intel_crtc_copy_uapi_to_hw_state()
* Use drm_mode_copy() all over]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-7-ville.syrjala@linux.intel.com
Collect up a bunch of derived state "readout" into
a common helper, which we can call from both
intel_encoder_get_config() and intel_crtc_get_pipe_config().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-6-ville.syrjala@linux.intel.com
Generalize intel_mode_from_pipe_config() to work on any two
arbitrary modes. Also relocate the code for the future, and
make it static since it's not needed elsewhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-5-ville.syrjala@linux.intel.com
No reason to make the callers of intel_crtc_get_pipe_config()
populate hw.active. Let's do it in intel_crtc_get_pipe_config()
itself. hw.enable we leave up to the callers since it's slightly
different for readout vs. state check.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-4-ville.syrjala@linux.intel.com
Create a new function intel_crtc_get_pipe_config()
that calls platform specific hooks for get_pipe_config()
No functional change here.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Conform to modern i915 coding style, fix patch subject]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-3-ville.syrjala@linux.intel.com
No functional changes, create a separate intel_encoder_get_config()
function that calls encoder->get_config hook.
This is needed so that later we can add beigjoienr related
readout here.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Move the code around for the future]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-2-ville.syrjala@linux.intel.com
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com
Display is always disabled and enabled when resetting any engine, but if
there is no display it should not do anything with display and only
reset the needed engines.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-3-lucas.demarchi@intel.com
Reduce this maintenance nightmare a bit by converting the plane
min/max width/height stuff into vfuncs.
Now, if I could just think of a nice way to also use this for
intel_mode_valid_max_plane_size()...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924185113.30849-1-ville.syrjala@linux.intel.com
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
DG1 uses 2 registers for the ddi clock mapping, with PHY A and B using
DPCLKA_CFGCR0 and PHY C and D using DPCLKA1_CFGCR0. Hide this behind a
single macro that chooses the correct register according to the phy
being accessed, use the correct bitfields for each pll/phy and implement
separate functions for DG1 since it doesn't share much with ICL/TGL
anymore.
The previous values were correct for PHY A and B since they were using
the same register as before and the bitfields were matching.
v2: Add comment and try to simplify DG1_DPCLKA* macros by reusing
previous ones
v3:
- Fix DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK() after wrong macro reuse
- Move phy -> id map to a separate macro (Aditya)
- Remove DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK where not required
(Aditya)
- Use drm_WARN_ON
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106210006.837953-1-lucas.demarchi@intel.com
Replace the previous approach to force compute the initial PSR state
after i915 take over from firmware by the better and recently added
initial_fastset_check() hook.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221048.104294-1-jose.souza@intel.com
Fix a typo that led to some MST short pulse event handling issue (the
short pulse event was handled for both encoder instances, each having
its own state).
Fixes: 1d8ca00245 ("drm/i915: Add PORT_TCn aliases to enum port")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104010000.4165574-1-imre.deak@intel.com
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl+R8a4ACgkQ+mJfZA7r
E8oazwgAu+NP5GlIHTcG6bV4vxRaEDdlDf3uH+ENOGfRT0PoX6qVNpkdc/nmTZC/
RFzHVsKJi1zXS9XetP33YKZ7KFPZxJMXdhGSu+f08Q6nf0jBdFUm3mhnrDWoLO9+
fS88L4HqXREvBLDctN89akuZ1/pZ3p0KsBqAOuP+LjRAsquHgIP3eUzwZMVbTgTZ
KLojKMHHrZxRtynMFrW6JO+gBok+mGydpOp7F1bK4jSmOIlYA5OsIW3xn9+Ytveu
9Od/yIjKeCyPD64ncz8wcbcPxZhnXENzZElBYT6sQSHDZ9wNCOUhfJT0v8t8G5So
vzOvf2YXa+2IKiGY2sd2ov9svz3Wgg==
=oidT
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
The block comment for cnl_program_nearest_filter_coefs() has a wonderful
diagram, but although it is marked up as kerneldoc does not use the
markup for providing the function definition.
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'dev_priv' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'pipe' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'id' not described in 'cnl_program_nearest_filter_coefs'
drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'set' not described in 'cnl_program_nearest_filter_coefs'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021185649.17759-1-chris@chris-wilson.co.uk
GEN >= 10 hardware supports the programmable scaler filter.
Attach scaling filter property for CRTC and plane for GEN >= 10
hardwares and program scaler filter based on the selected filter
type.
changes since v3:
* None
changes since v2:
* Use updated functions
* Add ps_ctrl var to contain the full PS_CTRL register value (Ville)
* Duplicate the scaling filter in crtc and plane hw state (Ville)
changes since v1:
* None
Changes since RFC:
* Enable properties for GEN >= 10 platforms (Ville)
* Do not round off the crtc co-ordinate (Danial Stone, Ville)
* Add new functions to handle scaling filter setup (Ville)
* Remove coefficient set 0 hardcoding.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-5-pankaj.laxminarayan.bharadiya@intel.com
Integer scaling (IS) is a nearest-neighbor upscaling technique that
simply scales up the existing pixels by an integer
(i.e., whole number) multiplier.Nearest-neighbor (NN) interpolation
works by filling in the missing color values in the upscaled image
with that of the coordinate-mapped nearest source pixel value.
Both IS and NN preserve the clarity of the original image. Integer
scaling is particularly useful for pixel art games that rely on
sharp, blocky images to deliver their distinctive look.
Introduce functions to configure the scaler filter coefficients to
enable nearest-neighbor filtering.
Bspec: 49247
changes since v6:
* Trust compiler, remove pointless inline keyword from cnl_coef_tap()
& cnl_nearest_filter_coef() functions (Ville)
changes since v4:
* Make cnl_coef_tap(), cnl_nearest_filter_coef() inline (Uma)
changes since v3:
* None
changes since v2:
* Move APIs from 5/5 into this patch.
* Change filter programming related function names to cnl_*, move
filter select bits related code into inline function (Ville)
changes since v1:
* Rearrange skl_scaler_setup_nearest_neighbor_filter() to iterate the
registers directly instead of the phases and taps (Ville)
changes since RFC:
* Refine the skl_scaler_setup_nearest_neighbor_filter() logic (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-4-pankaj.laxminarayan.bharadiya@intel.com
No functional changes in this patch.
With Bigjoiner, there are 2 pipes driving 2 halfs of 1
transcoder. The transcoder_mode has the full timings, and is used
for configuring the transcoder with the intended mode after
joining the 2 halves.
To clear the confusion, we rename intel_set_pipe_timings to
intel_set_transcoder_timings
v2:
* Split the renaming into separate patch (Ville)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008214535.22942-2-manasi.d.navare@intel.com
Currently we call .hpd_irq_setup() directly just before display
resume, and follow it with another call via intel_hpd_init()
just afterwards. Assuming the hpd pins are marked as enabled
during the open-coded call these two things do exactly the
same thing (ie. enable HPD interrupts). Which even makes sense
since we definitely need working HPD interrupts for MST sideband
during the display resume.
So let's nuke the open-coded call and move the intel_hpd_init()
call earlier. However we need to leave the poll_init_work stuff
behind after the display resume as that will trigger display
detection while we're resuming. We don't want that trampling over
the display resume process. To make this a bit more symmetric
we turn this into a intel_hpd_poll_{enable,disable}() pair.
So we end up with the following transformation:
intel_hpd_poll_init() -> intel_hpd_poll_enable()
lone intel_hpd_init() -> intel_hpd_init()+intel_hpd_poll_disable()
.hpd_irq_setup()+resume+intel_hpd_init() -> intel_hpd_init()+resume+intel_hpd_poll_disable()
If we really would like to prevent all *long* HPD processing during
display resume we'd need some kind of software mechanism to simply
ignore all long HPDs. Currently we appear to have that just for
fbdev via ifbdev->hpd_suspended. Since we aren't exploding left and
right all the time I guess that's mostly sufficient.
For a bit of history on this, we first got a mechanism to block
hotplug processing during suspend in commit 15239099d7 ("drm/i915:
enable irqs earlier when resuming") on account of moving the irq enable
earlier. This then got removed in commit 50c3dc970a ("drm/fb-helper:
Fix hpd vs. initial config races") because the fdev initial config
got pushed to a later point. The second ad-hoc hpd_irq_setup() for
resume was added in commit 0e32b39cee ("drm/i915: add DP 1.2 MST
support (v0.7)") to be able to do MST sideband during the resume.
And finally we got a partial resurrection of the hpd blocking
mechanism in commit e8a8fedd57 ("drm/i915: Block fbdev HPD
processing during suspend"), but this time it only prevent fbdev
from handling hpd while resuming.
v2: Leave the poll_init_work behind
v3: Remove the extra intel_hpd_poll_disable() from display reset (Lyude)
Add the missing intel_hpd_poll_disable() to display init (Imre)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013181137.30560-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20201015122138.30161-1-chris@chris-wilson.co.uk
(cherry picked from commit d46b60a2e8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
crtc_state->lspcon_downsampling isn't particularly useful at
the moment since we can't even do proper readout for it.
Let's get rid of it. Will help with unifying the LSPCON with
the regular DFP YCbCr output support.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Currently we leave the cache_level of the initial fb obj
set to NONE. This means on eLLC machines the first pin_to_display()
will try to switch it to WT which requires a vma unbind+bind.
If that happens during the fbdev initialization rcu does not
seem operational which causes the unbind to get stuck. To
most appearances this looks like a dead machine on boot.
Avoid the unbind by already marking the object cache_level
as WT when creating it. We still do an excplicit ggtt pin
which will rewrite the PTEs anyway, so they will match whatever
cache level we set.
Cc: <stable@vger.kernel.org> # v5.7+
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2381
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007120329.17076-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Recently we came across requirement to identify EHL and JSL
platform to program them differently. Thus Split the basic
platform definition, macros, and PCI IDs to differentiate
between EHL and JSL platforms. Also, IS_ELKHARTLAKE is replaced
with IS_JSL_EHL everywhere.
Changes since V1 :
- Rebased to avoid merge conflicts
- Added missed check for jasperlake in intel_uc_fw.c
Cc : Matt Roper <matthew.d.roper@intel.com>
Cc : Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201013192948.63470-1-tejaskumarx.surendrakumar.upadhyay@intel.com
When the number of potential color planes grew to 4 we stopped
setting all unused color plane offsets to ~0xfff. The code
still tries to do this, but actually does nothing since the
loop limits are bogus.
skl_check_main_surface() actually depends on this ~0xfff
behaviour as it will make sure to move the main surface
offset below the aux surface offset because the hardware
AUX_DIST must be a non-negative value [1], and for simplicity
it doesn't bother checking if the AUX plane is actually
needed or not. So currently it may end up shuffling the
main surface around based on some stale leftover AUX offset.
The skl+ plane code also just blindly calculates the AUX_DIST
whether or not the AUX plane is actually needed by the hw or
not, and that too will now potentially use some stale AUX
surface offset in the calculation. Would seem nicer to
guarantee a consistent non-negative AUX_DIST always.
So bring back the original ~0xfff offset behaviour for
unused color planes. Though it doesn't seem super likely
that this inconsistency would cause any real issues.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 79148ce4b2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl93cBoACgkQ+mJfZA7r
E8q8pQf+KvebXTbfD217OMONXqPt0+EC85hqA1LHmMq0E4W/qh2XjO242bdNq9oJ
qLd6YxKOXcWHxlDn1dlPTGOAbpDWeTT228QfC/vQMyvHnWX00J1EXoXnl14gHs7w
rYUdpdmC0qW5W5oJjdUU1P3EprahmOr0XNTOURS8fiylZBo8vTm4H3kB4iVsLSrT
zpUOthQ3PomnOUTeSQVDeYFgT5+S79qguUq9u27DBj+kKwrdx3IeAMHHEtXzg2JD
AmKgjRxH5PyZny9roCoKhm/aA3Zx32CXZI/zW84sKg9/ryh3SGHbIwJbTRaNX8ub
qheu87bWxm1v0a/7ZUr0Frb7tzXpAA==
=vULA
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Propagated from drm-intel-next-queued:
- Fix CRTC state checker (Ville)
Propated from drm-intel-gt-next:
- Avoid implicit vmpa for highmem on 32b (Chris)
- Prevent PAT attriutes for writecombine if CPU doesn't support PAT (Chris)
- Clear the buffer pool age before use. (Chris)
- Fix error code (Dan)
- Break up error capture compression loops (Chris)
- Fix uninitialized variable in context_create_request (Maarten)
- Check for errors on i915_vm_alloc_pt_stash to avoid NULL dereference (Matt)
- Serialize debugfs i915_gem_objects with ctx->mutex (Chris)
- Fix a rebase mistake caused during drm-intel-gt-next creation (Chris)
- Hold request reference for canceling an active context (Chris)
- Heartbeats fixes (Chris)
- Use usigned during batch copies (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002182610.GA2204465@intel.com
Another step towards PSR2 selective fetch, here programming plane
selective fetch registers and MAN_TRK_CTL enabling selective fetch but
for now it is fetching the whole area of the planes.
The damaged area calculation will come as next and final step.
v2:
- removed warn on when no plane is visible in state
- removed calculations using plane damaged area in
intel_psr2_program_plane_sel_fetch()
v3:
- do not shift 16 positions the plane dst coordinates, only src is
shifted
v4:
- only setting PLANE_SEL_FETCH_CTL_ENABLE and MCURSOR_MODE in
PLANE_SEL_FETCH_CTL
v5:
- not masking bits for cursor
BSpec: 55229
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201007195238.53955-3-jose.souza@intel.com
when the hardware isn't going to use the aux plane there's no
real point in dealing with the relevant hardware restrictions.
So let's just skip all that when not necessary.
We can now also remove the offset=~0xfff behaviour for unused
color planes. Let's just zero out everyting so as to not leave
stale garbage behind to confuse people debugging the code.
v2: Explicitly set AUX_DIST to zero when there is no aux plane
Reviewed-by: Imre Deak <imre.deak@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201009120028.32422-1-ville.syrjala@linux.intel.com
When the number of potential color planes grew to 4 we stopped
setting all unused color plane offsets to ~0xfff. The code
still tries to do this, but actually does nothing since the
loop limits are bogus.
skl_check_main_surface() actually depends on this ~0xfff
behaviour as it will make sure to move the main surface
offset below the aux surface offset because the hardware
AUX_DIST must be a non-negative value [1], and for simplicity
it doesn't bother checking if the AUX plane is actually
needed or not. So currently it may end up shuffling the
main surface around based on some stale leftover AUX offset.
The skl+ plane code also just blindly calculates the AUX_DIST
whether or not the AUX plane is actually needed by the hw or
not, and that too will now potentially use some stale AUX
surface offset in the calculation. Would seem nicer to
guarantee a consistent non-negative AUX_DIST always.
So bring back the original ~0xfff offset behaviour for
unused color planes. Though it doesn't seem super likely
that this inconsistency would cause any real issues.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008101608.8652-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Atm, if a full modeset is performed during the initial modeset the link
training will happen with uninitialized max DP rate and lane count. Make
sure the corresponding encoder state is initialized by adding an encoder
hook called during driver init and system resume.
A better alternative would be to store all states in the CRTC state and
make this state available for the link re-training code. Also instead of
the DPCD read in the hook there should be really a proper sink HW
readout in place. Both of these require a bigger rework, so for now opting
for this minimal fix to make at least full initial modesets work.
The patch is based on
https://patchwork.freedesktop.org/patch/101473/?series=10354&rev=3
v2: (Ville)
- s/sanitize_state/sync_state/
- No point in calling the hook when CRTC is disabled, remove the call.
- No point in calling the hook for MST, remove it.
v3: Check only DPCD_REV to avoid clobbering intel_dp->dpcd. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005230154.1477653-1-imre.deak@intel.com
Move the checks to decide whether a fastset is possible during the
initial commit to an encoder hook. This check is really encoder specific
and the next patch will also require this adding a DP encoder specific
check.
v2: Fix negated condition in gen11_dsi_initial_fastset_check().
v3: Make sure to call the hook for all encoders on the crtc. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005215311.1475666-1-imre.deak@intel.com
Implement display w/a #1142. This supposedly fixes some underruns
with FBC+VTd. Bspec says we should use the same programming regardless
of circumstances. Apparently we should flip the magic bits before
turning on any planes so let's put this into the early w/as.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924194810.10293-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
Previously intel_dump_pipe_config() used to dump the full crtc state
whether or not the crtc was logically enabled or not. As that meant
occasionally dumping confusing stale garbage I changed it to
check whether the crtc is logically enabled or not. However I did
not realize that the state checker readout code does not
populate crtc_state.hw.{active,enabled}. Hence the state checker
dump would only give us a full dump of the sw state but not the hw
state. Fix that by populating those bits of the hw state as well.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Fixes: 10d75f5428 ("drm/i915: Fix plane state dumps")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com
(cherry picked from commit 504c7bd85c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case of DSI cmd mode, we get hw vblank counter updated after the TE
comes in, if we try to read the hw vblank counter in te handler we
wouldnt have the udpated vblank counter yet. This will lead to a state
where we would send the vblank event to the user space in the next te,
though the frame update would have completed in the first TE duration
itself. Hence switch to using software timestamp based vblank counter.
v2: Use mode_flags from crtc_state (Ville)
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924124209.17916-6-vandita.kulkarni@intel.com
Ville Syrjälä
Niranjana Vishwanathapura
Daniel Vetter
Andrzej Hajda
Hans de Goede
Jani Nikula
Lyude Paul
Linus Torvalds
Rodrigo Vivi
Anusha Srivatsa
Thomas Zimmermann
Lu Baolu
Dave Airlie
Imre Deak
Juha-Pekka Heikkilä
José Roberto de Souza
Caz Yokoyama
Tvrtko Ursulin
Swathi Dhanavanthri
Lucas De Marchi
Stanislav Lisovskiy
Matt Roper
Michał Winiarski
Matthew Brost
Anshuman Gupta
Tejas Upadhyay
Heikki Krogerus
Vandita Kulkarni
Ankit Nautiyal
Animesh Manna
Manasi Navare
Thomas Hellström
Christian König
Chris Wilson
Mohammed Khajapasha
Maarten Lankhorst
Sakari Ailus
Gwan-gyeong Mun
Andres Calderon Jaramillo
Aditya Swarup
Radhakrishna Sripada
Lee Shawn C
Tomi Valkeinen
Pankaj Bharadiya