Add fixed refresh rate mode in crtc_state dump.
VRR Timing Generator is running in fixed refresh rate mode when
vrr.vmin = vrr.vmax = vrr.flipline.
v2: s/fixed_rr/fixed rr for consistency with the other stuff. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322044345.3827137-2-ankit.k.nautiyal@intel.com
Let's use intel_display for dpll dump and compare hw state. This also
helps elimanate drm_i915_private dependency from i915_shared_dplls_info
in intel_display_debugfs.c
--v2
-Fix commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-4-suraj.kandpal@intel.com
Mandate a minimum Hblank symbol cycle count between BlankingStart and
BlankingEnd in 8b/10b MST and 128b/132b mode.
v2: Affine calculation/updation of min HBlank to dp_mst (Jani)
v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani)
v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx
(Jani)
Limit hblank to 511 and accommodate BS/BE in calculated value
(Srikanth)
v5: Some spelling corrections (Suraj)
v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and
DP1.4 (Suraj)
v7: crtc_state holds the logical values and the register value
computation is moved to mst_enable() (Jani)
v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
Add crtc_state dump for vrr.vsync_{start/end} params to track the
state correctly.
--v2:
- remove vrr_ pretext and use space instead of underscore (Jani).
--v3:
- Rebase to latest drm-tip.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-2-mitulkumar.ajitkumar.golani@intel.com
When looking at raw hardware scanline numbers it's helpful to
remember what the offset between the hardware values and our
more human readable numbers should be. Include that in the state dump.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Dump the calculated vmin/vmax vtotal values in addition to the
raw vmin/vmax/flipline values. Makes it much easier to see what
kind of scanline values we should be expecting from the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
According to BSpec we now should call "master" pipes, "primary" pipes
and "slave" pipes, should be "secondary" pipes.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Don't rename port sync stuff, catch a few more things]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603112551.6481-3-stanislav.lisovskiy@intel.com
Lets unify both bigjoiner and ultrajoiner under simple "joiner" name,
because in future we might have multiple configurations, involving
multiple bigjoiners, ultrajoiner, however it is possible to use
same api for handling both.
v2: - Renamed back some bigjoiner specific parts for now(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Catch a few more cases]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607075457.15700-1-stanislav.lisovskiy@intel.com
After setting has_psr for panel replay as well crtc state dump is
improperly printing "psr: enabled" for Panel Replay as well. Fix this by
checking also has_panel_replay.
Fixes: 5afa6e4960 ("drm/i915/psr: Set intel_crtc_state->has_psr on panel replay as well")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-3-jouni.hogander@intel.com
We are going to reuse has_psr2 for panel_replay as well. Rename it
as has_sel_update to avoid confusion.
v3: do not add has_psr check into psr2 case in intel_dp_compute_vsc_sdp
v2: Rebase
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-2-jouni.hogander@intel.com
Plumb the drm_printer to all the little helpers called
by intel_crtc_state_dump() and use it there as well.
The exceptions are the ELD and infoframe stuff as they
call helpers outside of the drm and thus can't use
drm_printer.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215164055.30585-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Utilize drm_printer in pipe_config_pll_mismatch() to avoid
a bit of code duplication.
To achieve this we need to plumb the printer all way to the
dpll_mgr .dump_hw_state() functions. Those are also used by
intel_crtc_state_dump() which needs to be adjusted as well.
v2: Convert a few misplaecd drm_dbg_kms() calls (Rodrigo)
Drop the redundant drm_debug_enabled() check here
instead of later (Jani)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229184049.31165-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmVyFWMACgkQ+mJfZA7r
E8rVUwf/RWWyIyrlSOvz7okNgLtTn9K2A3WdtY6hPK6XZ/LVlO9MbCPT74E8Pnh3
mtxFK8fma8nXoVWCOxwtLI9HKJXiMgTIxpKAqapO2cU/ScpRZYoRJjaVIEMjiEWs
AhFSh/9D+u6hXeuYhAsg101sbmWmgvoIgoA4Ob2bUNyJOgsi5rLYsCsd0Y5i0qwm
CHvoyabZMXH4cYn19GlfOIxFtJ4StfaTfd5lNKAmXGrfoWTDQ5WkouXSaZ5EozoW
bl7gaF0kxbXH0RPw/A5VfmbHVaOnjWXIYNYN/51u3nvc4Oi1qeoDhKPmp9uJJ8Hr
AfqDo4h2WZkreuy+hB79uFa/YQA92Q==
=XV0u
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2023-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Improve display debug msgs and other general clean-ups (Ville, Rahuul)
- PSR fixes and improvements around selective fetch (Jouni, Ville)
- Remove FBC restrictions for Xe2LPD displays (Vinod)
- Skip some timing checks on BXT/GLK DSI transcoders (Ville)
- DP MST Fixes (Ville)
- Correct the input parameter on _intel_dsb_commit (heminhong)
- Fix IP version of the display WAs (Bala)
- DGFX uses direct VBT pin mapping (Clint)
- Proper handling of bool on PIPE_CONF_CHECK macros (Jani)
- Skip state verification with TBT-ALT mod (Mika Kahona)
- General organization of display code for reusage with Xe
(Jouni, Luca, Jani, Maarten)
- Squelch a sparse warning (Jani)
- Don't use "proxy" headers (Andy Shevchenko)
- Use devm_gpiod_get() for all GPIOs (Hans)
- Fix ADL+ tiled plane stride (Ville)
- Use octal permissions in display debugfs (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
Currently no one can figure out what the PSR code is doing since
we're including any of it in the basic state dump. Add at least the
bare minimum there.
v2: Also dump has_panel_replay (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124082735.25470-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Track DP enhanced framing properly in the crtc state instead
of relying just on the cached DPCD everywhere, and hook it
up into the state check and dump.
v2: Actually set enhanced_framing in .compute_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
VLV has a so called "wide gamut color correction" unit (WGC).
What it is is a 3x3 matrix similar to the later CHV CGM
CSC, with less precisions/range. In fact CHV also has the WGC
but using it there doesn't really make sense when you have the
superior CGM CSC around.
Hook up the necessary stuff to expose the WGC as the CTM
crtc property.
One additional crazy idea that came to mind would be to use
the WGC as an output CSC on CHV for YCbCr output. But it
would be incompatible with the legacy LUT usage. In fact
since the WGC lacks post-offsets we'd probably have to
use the legacy LUT to do that final part of the RGB->YCbCr
conversion. Sounds doable, but perhaps not worth the hassle.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
Include the csc matrices in the state dump. The format being
hardware specific we just dump as hex for now. Might have
to think of some way to get a bit more human readable
output...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.
v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
With the delayed vblank we need to start knowing where
the blanking periods start. So let's start dumping
out also the blanking start/end timings.
And while at it let's try to make that huge list of
numbers somewhat legible by indicating what each value
means. Also drop the 'type' since that doesn't really
mean anything for the crtc_ timings.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Include the ELD has a hex blob in the crtc state dump.
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-12-ville.syrjala@linux.intel.com
Since we now have a place (pre_csc_lut) to stuff a purely
internal LUT we can replace glk_load_degamma_lut_linear()
with such a thing and just rely on the normal
glk_load_degamma_lut() to load it as well.
drm_mode_config_cleanup() will clean this up for us.
v2: Pass on the error pointer
Drop a hint about this into the state dump
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-5-ville.syrjala@linux.intel.com
Add an extra remapping step between the logical state of the LUTs
(hw.(de)gamma_lut) as specified via uapi/bigjoiner copy vs.
the actual state of the LUTs programmed into the hardware.
With this we should be finally able finish the (de)gamma
readout/state checker support for the remaining platforms
(ilk-skl) where the same hardware LUT can be positioned
either before or after the pipe CSC unit. Where we position
it depends on factors such as presence of the logical degamma
LUT, RGB vs. YCbCr output, full vs. limited RGB quantization
range.
Without the extra remapping step the state readout doesn't
really know whether the LUT read from the hardware is the
degamma or gamma LUT, and so we is unable to accurately store
it into our crtc state. With the remapping step we know
exactly where to put it given the order of the LUT vs. CSC
in the hardware state.
Only the initial hw->uapi state readout done during driver
load/resume still has the problem of not really knowing
what to do with the LUT(s). But we can just assume 1:1
mapping there and let subsequent commits fix things up.
Another benefit is that we now have a place for purely
internal LUTs, without complicating the bigjoiner uapi->hw
copy logic. This should prove useful for streamlining
glk degamma LUT handling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024161514.5340-3-ville.syrjala@linux.intel.com
Add debug print statement to print scaler filter property
value. Since property can be set as either default or integer
scaler; its good if we can get debug print for the same in dmesg
log.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706102240.21414-1-swati2.sharma@intel.com
Jani Nikula
Ankit Nautiyal
Suraj Kandpal
Arun R Murthy
Mitul Golani
Ville Syrjälä
Imre Deak
Stanislav Lisovskiy
Jouni Högander
Dave Airlie
Swati Sharma