[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Providing hardware programming for the RMCM and MCM IPs for 3DLUT in DCN42.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Avoid null curve data structure used in the cm block for the potential issue.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Large stack size observed in DCN4 mode support when compiling with clang.
Additional instrumentation added by compiler adds to stack size.
dml_core_mode_support ends up going over the stack size limit
due to the size of the function.
[How]
Move checks and calculations for prefetch to its own function.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Move desync error counter operation up to prevent
it from being skipped by force disable desync
error.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated
then they can lead to a divide by zero in downstream callers like
CalculateVMAndRowBytes()
[How]
Initialize dummy value to a value to avoid divide by zero.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read Request provides alterative method to polling to
the HDMI sinks that support it.
[How]
Implement Read Request where interrupt can be generated
by the sink.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some pixel clock margin sensitive external monitor,
we could not keep original DP ref clock for the ASICs
supported SSC DP ref clock.
[How]
From slicon design team's comment,
we have to apply the adjusted DP ref clock for
DP devices.
DP 128b (DP2) signals uses the DTBCLK not DP ref.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing DCE 6.0 6.1 and 6.4 are identified as UNKNOWN. Fix this.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Probably a cut and paste error from using get_integrated_info_v8's comment.
This has to be get_integrated_info_v9
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
i2c_speed_in_khz was set twice with the same values. Looking at other DCE
versions, we probably wanted to set the value for i2c_speed_in_khz_hdcp.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While not needed per speaking, all the other parameters have names but
this one.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The prefix dce110 is used on all functions, but init_pipes() and
init_hw(). Under DCN, these sames functions are prefixed.
Let's keep thing coherent.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The structures are large and they do not require contiguous
memory so use vzalloc.
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Classify DCE6 resource and sequencer as they are for other DCE versions
Put dce60_resource.c and .h under amd/display/dc/resource/dce60
Put and rename dce60_hw_sequencer.c and .h under amd/display/dc/hwss/dce60
v2: fix build when CONFIG_DRM_AMD_DC_SI=n (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCE6, DCE8, DCE10, DCE11, "hdp" is replaced by "hpd" and
replace "type" by "hpd" for a uniform parameter naming usage across DCEs.
In link_factory.c, there is a missing "p" to "types"
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Optimize custom brightness curve
* Correct SSC enable detection for DCN351
* Turn off eDP lcdvdd and backlight if not required
* Use DMUB Fused IO interface for HDCP
* Extend eDP-on-DP1 quirk list
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Fix the confusing entry/exit message name for IPS2
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A+N configuration, eDP on A-APU is off, extended display active.
Resume from s4, eDP's backlight is still on.
[how]
Turn off inactive eDP backlight and lcdvdd.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix was previously in 25.20 but was reverted out as it was accompanied
by other changes that caused regression.
[why&how]
Disabling dtb as the dto src during dpms off relies on in the same
instance being able to also alter the dto src bit to dpref (or not dtb
in general), but this was recently changed to only take place in
dcn31_program_pix_clk, as that is where we want to perform any dto src
changes because tg is off at that point, it is unsafe to do that
elsewhere. What this means is now instead of disabling dtb as dto src
and modifying source bit, we are left with the configuration for a given
tg that specifies dtb as dto src and dtb dto en simultaneously is unset.
dcn31_program_pix_clk can rectify this but its possible for us to
perform some tg dependant operation that would simply hang because when
we go to enable say crtc then, the clk we specify as dto src is "off" en
bit is cleared, source bit was never changed, and program_pix_clk hasnt
been called yet (as apart of dpms on)
We cant disable it as dto src during dpms off if we want the luxury of
performing tg dependant operation during dpms off and before dpms on.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
It is possible for an update to acquire otg lock and begin programming
while the previous update has not completed and its values have not
latched. The correct way to go about this is to wait until the vupdate
pulses so we can be sure that previous updates have latched and we can
continue with the current update pipe programming, otherwise during
consecutive full updates we will have corruption flash on the screen.
The corruption flash occurs specifically on configs that require odm
combine, and its local to a specific pipe (will not flash across whole
screen). This ticket is across the otg slave, but it may also appear
across master.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A variety of the 3DLUT handling functions check
`debug.enable_mem_low_power.bits.cm` both in the caller and function.
This is unnecessary overhead.
[How]
For each of them reduce to just checking just in caller or function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDCP locality check has strict timing requirements, currently broken
due to reliance on msleep which does not guarantee accuracy.
The PR moves the write-poll-read sequence into DMUB using new generic
Fused IO interface, where the timing accuracy is greatly improved.
New flow is enabled using DCN resource capability bit (none for now),
or using a debug flag.
[How]
* Extended mod_hdcp_config with new function for requesting DMUB
to execute a sequence of fused I2C/AUX commands and synchronously
wait until an outbox reply arrives or a timeout expires.
* If the timeout expires, send an abort to DMUB.
* Update HDCP to use the DMUB for locality check if supported.
* Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK.
* Make the first enable new flow regardless of resource capabilities.
* Make the second enable fallback to old SW flow.
* Clean up makefile source file listings for easier updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to very small clock register delta between DCN35 and DCN351, clock
spread is being checked on the wrong register for DCN351, causing the
display driver to believe that DPREFCLK downspread to be disabled when
in some stacks it is enabled. This causes the clock values for audio to
be incorrect.
[How]
Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35
function that checks for SSC enable to read CLK6 instead of CLK5 when
using DCN351. This allows us to read for DPREFCLK downspread correctly
so the clock can properly compensate when setting values.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Kevin Gao <kevin.gao3@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "timing" cannot be NULL because it
points to the object "struct dc_crtc_timing".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed unused function mpc401_get_3dlut_fast_load_status.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
- VUPDATE_NO_LOCK should be used in place of VUPDATE always
- Add VERTICAL_INTERRUPT1 and VERTICAL_INTERRUPT2 definitions
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fe45e2af4a.
Reason for revert: it causes stuttering in some usecases.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN401 uses a different structure to store the VStartup offset used to
calculate the VUpdate position, so adjust the calculations to use this
value.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Core should evaluate support based on the max clocks after considering
downspread.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This array was initially defined as size 50. There were array overflow
issues so the size was increased to 100. To ensure such issues are
avoided in the future, the size should be set based on the possible
contents instead of an arbitrary value.
[How]
- upper bound, assume every update occurs on max number of pipes
- define array sizes for function parameters, for static analysis
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Mapping of ODM enum is different for DML2.0 vs DML2.1.
Configs using DML2.1 will incorrectly trigger an assert meant for DML2.0.
[How]
Use if/else to seperate logic between DML2.0 and DML2.1.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Access to indirect registers by DC and other components are not synchronized.
[How]
Use sync version of indirect register access.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a temporary scratch dc_link for programming purposes
and fix a copy of pipe_ctx on the stack to a pointer reference.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
the guard of is_apu not in sync, caused no watermark_c output.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read the histogram for VariBright validation
[How]
Add dc/dmub functions to read histogram and ACE
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It makes DSC enable when we commit the stream which need
keep power off.And then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To bring in latest changes in DML21
[List of Changes]
- Unification of DML logging to use DML_LOG_* macro
- Clean up variables that are exclusively used for logging
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to output visual confirm color based on stream.
[HOW]
If visual confirm is for DMUB, use DMUB to get color.
Otherwise, find plane with highest layer index, output visual confirm color
of pipe that contains plane with highest index.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to allow the display manager to override the visual
confirm color in DC when required.
[HOW]
Add new visual confirm mode VISUAL_CONFIRM_EXPLICIT, check mode before
setting visual confirm color.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When link training fails, the phy clock will be disabled. However, in
enable_streams, it is assumed that link training succeeded and the
mux selects the phy clock, causing a hang when a register write is made.
[How]
When enable_stream is hit, check if link training failed. If it did, fall
back to the ref clock to avoid a hang and keep the system in a recoverable
state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Brendan Tam <Brendan.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
this dscclk use DCN defined per DPM level will cause a DCFCLK increase.
needs to follow up.
This reverts commit 15b959534a
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Use DPM table clk setting for dml2 soc dscclk
- Update static soc table
- Fix incorrect fw_state address in dmub_srv
- Use HW lock mgr for PSR1 when only one eDP
- Revert "Support for reg inbox0 for host->DMUB CMDs"
- Change notification of link BW allocation
- Fix message for support_edp0_on_dp1
- Guard against setting dispclk low for dcn31x
- Prevent VStartup Overflow
- Check pipe->stream before passing it to a function
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Not like dppclk/dispclk, dml2 will calculate the minimum required clocks.
For dscclk, it is used for pure comparision.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Update the static soc table dcn3_5_soc.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DMUB locking is important to make sure that registers aren't accessed
while in PSR. Previously it was enabled but caused a deadlock in
situations with multiple eDP panels.
[HOW]
Detect if multiple eDP panels are in use to decide whether to use
lock. Refactor the function so that the first check is for PSR-SU
and then replay is in use to prevent having to look up number
of eDP panels for those configurations.
Fixes: f245b400a2 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 15d1c2e6bf.
Reason: Cursor movement causes system to hang.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The response of DP BW allocation is handled in Outbox ISR.
When it failed to request the DP BW allocation, it sent another
DPCD request in Outbox ISR immediately. The DP AUX reply also
uses the Outbox ISR. So, no AUX reply happened in this case.
Change to use HPD IRQ for the notification.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We should never apply a minimum dispclk value while in
prepare_bandwidth or while displays are active. This is
always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true
and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk
required) we also need adjust the logic that clamps it for
the actual request to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Eric Yang <eric.yang@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Fixed Overflow issue by clamping VStartup to max value of register.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dp_is_128b_132b_signal dereferences pipe->stream so it is necessary to
check it in advance.
Also fix erroneous spaces and move a variable declaration to top.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This macro guard "__cplusplus" is unnecessary and should not be there.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some Replay/PSR issue
- Fix backlight brightness
- Fix suspend issue
- Fix visual confirm color
- Add scoped mutexes for amdgpu_dm_dhcp
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. apply oem panel timing (not only on OLED)
2. remove MIN_DPP_DISP_CLK request in driver.
This fix will apply for dcn31x but not
sync with DML's output.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some VR headsets with large blanks, it's possible
to overflow the OTG_VSTARTUP_PARAM:VSTARTUP_START
register. This can lead to incorrect DML calculations
and underflow downstream.
[How]
Min the calcualted max_vstartup_lines with the max
value of the register.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
stream->adjust will be overwritten by update->crtc_timing_adjust.
We should set update->crtc_timing_adjust->timing_adjust_pending
and then overwrite stream->adjust.
Reset update->crtc_timing_adjust->timing_adjust_pending after
the assignment.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Sometimes visual confirm color is updated, but the
background color is not changed. This causes visual
confrim to show incorrect colors.
[HOW]
Update background color when visual confirm color changes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.
It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.
Also fixes the indentation in get_norm_pix_clk.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The clear_dsc_setting at boot logic was based on dcn version
check.
As such new ASIC lost this DSC clear up logic, change the
assumption to BIOS support eDP DSC for new ASIC.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
DP spec has been updated recently to make regulated autonomous mode more
well-defined. In case any PCON vendors choose to implement regulated
autonomous mode in the future, pre-emptively add handling for the
regulated autonomous mode based on current spec.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DP tunneling should not abort link train even bandwidth become
too low after downgrade. Otherwise, it would fail compliance test.
[HOW}
Do link train with downgrade settings even bandwidth is not enough
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Vtotal is not applied to HW when handling vsync interrupt.
Make sure vtotal is aligned before enable replay.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Danny Wang <danny.wang@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When analyzing some crash dumps, not all of the expected DMUB info was
available, so we want to add in-object storage for this data.
[How]
- dmub_srv_debug (renamed to dmub_timeout_info) is already a member of
dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in
dmub_srv
- use dmub_srv->debug when collecting diagnostic info instead of stack
object to allow for easy inspection in crash dumps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When switching between PSR/Replay,
the DPCD config of previous mode is not cleared,
resulting in unexpected behavior in TCON.
[How]
Initialize the DPCD in setup function
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a008 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement w/a for a panel which requires 10s delay after link detect.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
print__rq_dlg_params_st() was added in 2017 by
commit 061bfa06a4 ("drm/amdgpu/display: Add dml support for DCN")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pre_surface_trace() has been unused since 2017's
commit 745cc746da ("drm/amd/display: remove
dc_pre_update_surfaces_to_stream from dc use")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Various cleanups to amdgpu dm
- Add DP tunneling IRQ handler
- Fix display corruption for dcn35
- Fix dmcub reset problem
- Adjust BW determination for PCON
- DIO encoder refactor
- Fix performance with SubVP under gaming
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
USB4 DP BW Allocation uses DP_TUNNELING_IRQ to indicate the status update.
The DP_TUNNELING_IRQ is defined in LINK_SERVICE_IRQ_VECTOR_ESI0. When
receiving DP HPD IRQ in USB4, read the LINK_SERVICE_IRQ_VECTOR_ESI0.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to add a visual confirm mode for DCC and MCache for
debugging purpose.
[HOW]
color pipes based on whether DCC is enabled and what MCache id
is used.
black - DCC disabled
red - DCC enabled
grey - 2 different MCaches used
other colors - 1 MCache used
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The struct is not and will not be used, as it is no longer relevant nor
supported.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Certain PCON will clear the FRL_MODE bit despite supporting the link BW
indicated in the other bits.
Thus, skip checking the FRL_MODE bit when interpreting the
hdmi_encoded_link_bw struct.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
These are left required changes for dio encoder refactor.
[HOW]
1. original logic is separated by config option
2. new link encoder dp enable/disable code for dcn35
3. process fec only for DP 8b10b encoding
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Read if panel support multi-sst links
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
P-state type would remain on previously used when unsupported which
causes confusion in logging and visual confirm, so set back to zero
when unsupported.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[how]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 6725a88f88 ("drm/amd/display: Add DCN3 DML")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e35 ("drm/amd/display: Rename more dc_surface stuff to plane_state")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of optc3_fpu_set_vrr_m_const() was removed in 2022's
commit 64f991590f ("drm/amd/display: Fix a compilation failure on PowerPC
caused by FPU code")
which removed the only caller (with a similar) name.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All dce command_table_helper's shares a copy-pasted collection
of copy-pasted functions, which are: phy_id_to_atom,
clock_source_id_to_atom_phy_clk_src_id, and engine_bp_to_atom.
This patch removes the multiple copy-pasted by moving them to
the command_table_helper.c and make the command_table_helper's
calls the functions implemented by the command_table_helper.c
instead.
The changes were not tested on actual hardware. I am only able
to verify that the changes keep the code compileable and do my
best to to look repeatedly if I am not actually changing any code.
This is the version 4 of the PATCH, fixed comments about
licence in the new files and the matches From email to
Signed-off-by email. Fixed comments about using
command_table_helper instead of creating a dce_common
Signed-off-by: Luan Icaro Pinto Arcanjo <luanicaro@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Disable PSR-SU on eDP panels
- Fix HPD after GPU reset
- Fixes on dcn4x init, DML2 state policy on DCN36
- Various minor logic fixes
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Transitioning from low to high resolutions at high refresh rates caused grey corruption.
During the transition state, there is a period where plane size is based on low resultion
state and ODM slices are based on high resoultion state, causing the entire plane to be
contained in one ODM slice. DML2 would turn off the pipe for the ODM slice with no plane,
causing an underflow since the pixel rate for the higher resolution cannot be supported on
one pipe. This change stops DML2 from turning off pipes that are mapped to an ODM slice
with no plane. This is possible to do without negative consequences because pipes can now
take the minimum viewport and draw with zero recout size, removing the need to have the
pipe turned off.
[How]
In map_pipes_from_plane(), remove "check" that skips ODM slices that are not covered by
the plane. This prevents the pipes for those ODM slices from being freed.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen
Taimur Hassan
Nicholas Susanto
Yihan Zhu
Austin Zheng
Jack Chang
Mario Limonciello
Chris Park
Yiling Chen
Alexandre Demers
Alex Deucher
Sherry Wang
Charlene Liu
Ausef Yousof
Dominik Kaszewski
Kevin Gao
Andrey Vatoropin
James Flowers
Aric Cyr
Dillon Varone
ChunTao Tso
Robin Chen
Joshua Aberback
JinZe.Xu
Chun-Liang Chang
Paul Hsieh
Leo Zeng
Huacai Chen
Brendan Tam
Cruise Hung
Jing Zhou
Ryan Seto
Alex Hung
Thadeu Lima de Souza Cascardo
Ethan Carter Edwards
Zhongwei Zhang
Zhikai Zhai
Peichen Huang
Danny Wang
Leon Huang
Aliaksei Urbanski
Aurabindo Pillai
Dr. David Alan Gilbert
Hansen Dsouza
Vitaliy Shevtsov
Ma Ke
Luan Arcanjo
Mike Katsnelson